guide unit, double acting Technical details

Size: px
Start display at page:

Download "guide unit, double acting Technical details"

Transcription

1 Technical details Operating pressure Temperature range Operating speed Medium bar -20 C C mm/s iltered, oil-free and dried compressed air according to ISO :2010, Class 7:2:4, instrument air, free of aggressive additives. lternatively the pressure dew point must be at least 10 C below lowest occurring ambient temperature. Materials Profile: lange plate: Piston rod: Guide rod: Seals: l (anodized) Steel (zinc plated) stainless steel stainless steel (-000), hardened steel (-100) PU Double acting pneumatic cylinder with magnetic piston and built-in cushioning rings. The sensors can be installed directly into the sensor grooves of the l-profile. The integrated cylinder and guide unit ensures precise and accurate movement. Standard stroke lengths in table below, additional lengths on request. Versions Order code 000, 100 double acting, built-in cushioning rings, with magnetic piston, guide unit Series LX standard LX-***-***-*** Versions 000 standard version, bronze bearing Piston Ø mm mm mm mm mm mm Technical data 100 standard version, ball bearings Stroke (mm) XXX Standard max. 200 mm 20*, 25**, 30*, 40*, 50, 75, 100, 125, 150, 175, 200 * only for Ø 20 and 25 mm, ** only for Ø mm 9 Model-no.: LX LX LX LX LX LX Piston Ø (mm) orce at 6 bar (N) Extension Retraction Connection G1/8 G1/8 G1/8 G1/8 G1/4 G1/4 Subject to change 01

2 Technical information Maximum force (N) Piston Ø (mm) Stroke length (mm) Version Version Version Version Version Version Version Version Version Version Version Version Maximum torque (Nm) Piston Ø (mm) Stroke length (mm) Version Version Version Version Version Version Version Version Version Version Version Version M M 02 Subject to change

3 Dimensions B D M N V Q P Y D H X J O C E R G Z1 + stroke G G S W O Z2 + stroke H J C CB Detail B BB E B BC BD 9 Piston Ø B C D E Ø G H J N O Ø P Ø Q Ø R S x 6 M5 x G1/ x 6 M6 x G1/ x 6 M8 x G1/ x 6 M8 x G1/ x 8 M10 x G1/ x 8 M10 x G1/ Piston Ø V W X Z1 D G H J K Ø B BB BC BD C M M M M M M10 Subject to change 03

4 Dimensions Piston Ø Stroke Version Y Z2 Ø E M CB Subject to change

5 Proximity sensors with cable Cylinders > piston rod cylinders > accessories > Series ZS Proximity sensors Proximity sensors with plug Proximity sensors and accessories ~/ R L ~/-/+ ZS-5600 ~/ ~/-/+ ZS-5601 ZS-5700 ZS-5701 ZS-6700, ZS-7300 ZS-6701, ZS-7302 PNP PNP Technical data Model-no.: ZS-5600 ZS-5601 ZS-5700 ZS-5701 Design 2-pole Reed sensor 2-pole Reed sensor 3-pole Reed sensor 3-pole Reed sensor Contact function NO NO NO NO Rated operational voltage V C / DC V C / DC V DC V DC Rated operational current I E m m 500 m 500 m Max. voltage drop at I E Breaking capacity 10 W 10 W 10 W 10 W Cable length 3 m 0.3 m with M8 connection 5 m 0.3 m with M8 connection Temperature range C C C C Protection IP 67 IP 67 IP 67 IP 67 Switching status indication LED red LED red LED yellow LED yellow 9 Model-no.: ZS-6700 ZS-6701 ZS-7300 ZS-7302 Design 3-pole inductive 3-pole inductive 3-pole inductive 3-pole inductive Contact function NO NO NO NO Output PNP PNP PNP PNP Rated operational voltage V DC V DC V DC V DC Rated operational current I E 200 m 200 m 100 m 100 m Max. voltage drop at I E Breaking capacity 6 W 6 W 3 W 3 W Cable length 3 m 0.3 m with M8 connection 6 m 0.3 m with M12 connection Temperature range C C C C Protection IP 67 IP 67 IP 67 IP 67 Switching status indication LED green LED green LED yellow LED yellow - - II 3G Ex n T4 II 3D Ex td 22 IP67 T 125 C II 3D Ex tc IIIC T125 C Dc X Subject to change 05

6 accessories > Series ZS Proximity sensors Cable with bushing for proximity sensors Model-no.: K-30 K-50 K-51 K-100 K-101 Connection M8, snap-in M8, snap-in M8, snap-in M8, snap-in M8, snap-in Version straight straight elbow 90 straight elbow 90 Cable length 3 m 5 m 5 m 10 m 10 m Mounting The sensors are mounted at the groove of the cylinder profile. It is fixed by turning the fixing screw at the sensor clockwise. The cover stripe XLB-011 (see below) can be used for protecting the sensor cable. Cover for sensor groove Model-no.: XLB-011 Design or series plastic profile, 50 cm length, blue XL, NXD, NXE, NYD, NYE, NYSE, LX 06 Subject to change

Series ZX. Cylinders > rodless cylinders > Technical details. Versions. Order code ZX- ** - ** - **** - **

Series ZX. Cylinders > rodless cylinders > Technical details. Versions. Order code ZX- ** - ** - **** - ** Cylinders > rodless cylinders > Technical details Operating pressure Temperature range Medium 1... 8 bar -10 C... +70 C Filtered, oil-free and dried compressed air according to ISO 8573-1:2010, Class 7:2:4,

More information

bar -30 C C ( C for high temperature version)

bar -30 C C ( C for high temperature version) Technical details ylinders > piston rod cylinders > Mini cylinders ISO 6432, double acting Operating pressure Temperature range Medium 1... 10 bar -30... +80 ( 0... +150 for high temperature version) Filtered,

More information

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple

More information

ISO Technical details

ISO Technical details Cylinders > piston rod cylinders > assembly groups > BP IO 15552 Technical details Operating pressure Cylinder with brake system XBP brake system 3... 6 bar Temperature range -10 C... +50 C Max. stroke

More information

bar -20 C C ( C for high temperature version) 1000 mm

bar -20 C C ( C for high temperature version) 1000 mm Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature

More information

XG*-***-****-***-****

XG*-***-****-***-**** Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...

More information

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552 Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder

More information

Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm

Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length

More information

Pneumatic cylinders, piston-ø 8 25 mm Single acting DIN ISO 6432

Pneumatic cylinders, piston-ø 8 25 mm Single acting DIN ISO 6432 Pneumatic cylinders, piston-ø 25 mm Single acting DIN ISO 6432 Technical data for series HE Order code HE-16-025 Series Piston-Ø Stroke length (mm) Design and function Single acting pneumatic cylinder

More information

Cylinders with integrated guide Series QCTF and QCBF

Cylinders with integrated guide Series QCTF and QCBF > Series QCTF - QCBF slide units CATALOGUE > Release 8.6 Cylinders with integrated guide Series QCTF and QCBF Double-acting, magnetic, with double bearings and flanges ø 20, 25, 32, 40 mm Magnetic sensors

More information

Double-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm

Double-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear

More information

KONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)

KONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended) KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50

More information

Tie rod cylinders, Series 523

Tie rod cylinders, Series 523 Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")

More information

Table of contents. Technical informations > ATEX Page Technical informations Page Mechanically operated valves Page 13-06

Table of contents. Technical informations > ATEX Page Technical informations Page Mechanically operated valves Page 13-06 Technical informations > Table of contents ATEX Page 13-02 Technical General informations information Page 13-02 Mechanically operated valves Page 13-06 Pneumatically operated valves Page 13-06 Electrically

More information

Double-acting, magnetic, cushioned ø16, 25, 32, 40, 50, 63, 80

Double-acting, magnetic, cushioned ø16, 25, 32, 40, 50, 63, 80 > Cylinders Series 50 CATALOGUE > Release 8.5 Rodless cylinders Series 50 Double-acting, magnetic, cushioned ø6, 25, 32, 40, 50, 63, 80»» Four ports on each chamber»» Possibility to supply both chambers

More information

Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C

Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure

More information

Standards ISO Max. particle size 50 µm. Pressure for determining piston forces 6 bar. Materials:

Standards ISO Max. particle size 50 µm. Pressure for determining piston forces 6 bar. Materials: Bosch Rexroth AG Pneumatics Ø - 100 mm Ports: M5 - double-acting with magnetic piston cushioning: elastic piston rod: Standards ISO 21287 Compressed air connection internal thread 00119673 Working pressure

More information

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm > Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the

More information

PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552

PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552 PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder

More information

Aluminium tube and profile

Aluminium tube and profile > Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,

More information

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from

More information

Cylinders Series 61 - Aluminium profile

Cylinders Series 61 - Aluminium profile CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to

More information

Aluminium profile. Double-acting, cushioned, magnetic ø mm

Aluminium profile. Double-acting, cushioned, magnetic ø mm > Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic

More information

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the

More information

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40% CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,

More information

ISO/VDMA Series ISO 6431 and VDMA Cylinder Line

ISO/VDMA Series ISO 6431 and VDMA Cylinder Line ISO/VDMA Series ISO 6431 and VDMA 24562 Cylinder Line www.asco.com Table of Contents ISO/VDMA Series Features and Benefits 2 How to Order 3 Technical Information 4 Dimensions Tie-Rod Version 5 Mounting

More information

ISO/VDMA Series ISO 6431 and VDMA Cylinder Line ISO 6431 and VDMA Cylinder Line w w w. n u m a t i c s. c o m

ISO/VDMA Series ISO 6431 and VDMA Cylinder Line ISO 6431 and VDMA Cylinder Line w w w. n u m a t i c s. c o m ISO/VDMA Series ISO 6431 and VDMA 24562 Line Cylinder Line ISO 6431 andcylinder VDMA 24562 w w w. n u m a t i c s. c o m Table of Contents ISO/VDMA Series Features and Benefits 3 How to Order 4 Technical

More information

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2 6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6

More information

Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves

Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning

More information

PED Pneumatic Escapement Modules Double Escapement Sizes Weight Advancing force Stroke Bending moment

PED Pneumatic Escapement Modules Double Escapement Sizes Weight Advancing force Stroke Bending moment PED www.comoso.com Sizes 60.. 96 Weight 0.34 kg.. 2.52 kg Advancing force 83 N.. 265 N Stroke 15 mm.. 60 mm Bending moment 5 Nm.. 10 Nm Application example Combined magazining/separating/feed application

More information

Series OCG Pneumatic Cylinders

Series OCG Pneumatic Cylinders New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING

More information

Electrically operated spool valve. The manual override is detent and is operated by screw driver.

Electrically operated spool valve. The manual override is detent and is operated by screw driver. Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed

More information

-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process

-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1

More information

Feed separators HPVS

Feed separators HPVS Key features and peripherals overview At a glance 1 Corrosion-resistant thanks to stainless steel plunger 2 Optimum and precise adaption options using centring sleeves 3 Supply ports optionally on top

More information

Double acting, cushioned, magnetic Ø mm

Double acting, cushioned, magnetic Ø mm CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562

More information

P1E Series ISO Cylinders

P1E Series ISO Cylinders High fibre nitrile Combined cushion/ Aluminium tube to Zinc diecast end plates Retained cushion piston rod seal non return seal for give high strength on 32, & 50mm bore adjusting screw allows a and polyurethane

More information

Max. particle size 5 µm. Pressure for determining piston forces Repetitive precision. Polyurethane

Max. particle size 5 µm. Pressure for determining piston forces Repetitive precision. Polyurethane Piston rod cylinders Guide cylinders 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston

More information

MGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX

MGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.

More information

Standards ISO Max. particle size 50 µm. Pressure for determining piston forces. Materials: Polyurethane

Standards ISO Max. particle size 50 µm. Pressure for determining piston forces. Materials: Polyurethane Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: external thread 1 Standards ISO 21287 Compressed air connection Internal thread Working pressure min./max. 1 bar / 10 bar Ambient

More information

Hinge cylinders DFAW

Hinge cylinders DFAW Key features At a glance Hinge cylinder for clamping components during the welding process Sintered bronze bushes as lowfriction bearing material on rod clevis and swivel bearing Clamping unit: With piston

More information

Standard Cylinders DNC Inch Series, to ISO 15552

Standard Cylinders DNC Inch Series, to ISO 15552 Standard Cylinders DNC Inch Series, to ISO 5552 DNC Standard Cylinders meet ISO 5552 mounting, rod, bore and thread dimension specifications for easy interchangeability. Piston ¼ to 2½ Strokes of up to

More information

Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C

Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the

More information

RexMover Series 277 & 297 Rodless Shuttle Cylinder

RexMover Series 277 & 297 Rodless Shuttle Cylinder Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics RexMover Series 277 & 297 Rodless Shuttle Cylinder Catalog pages

More information

Series CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity

Series CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity Profile Design ISO/VDMA Air Cylinder Series CP95 Improved end of stroke cushion capacity Piston rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. Increased

More information

RODLESS CYLINDER SERIES PU ACTUATORS

RODLESS CYLINDER SERIES PU ACTUATORS RODLESS CYLINDER SERIES PU 1 RODLESS CYLINDER SERIES PU RODLESS CYLINDER SERIES PU Series PU rodless cylinders have an internal strip for longitudinal tightness made of polyurethane (PU) with a harmonic

More information

GRIPPERS SERIES P3 - P12 ACTUATORS

GRIPPERS SERIES P3 - P12 ACTUATORS GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made

More information

P1Z Series. Magnetically Coupled Rodless Air Cylinders Contents

P1Z Series. Magnetically Coupled Rodless Air Cylinders Contents Magnetically Coupled Rodless Air Cylinders Contents Basic Version Features... 15 Ordering Information... 151 Specifications... 152 Technical Data... 153 Dimensions... 154 Mountings... 155 uided Version

More information

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

More information

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm > Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous

More information

Compact Cylinders ADN Inch Series, Based on ISO Overview

Compact Cylinders ADN Inch Series, Based on ISO Overview Compact Cylinders ADN Inch Series, Based on ISO 2287 Overview Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation space

More information

INTEGRATED HYDRAULIC BRAKE ACTUATORS

INTEGRATED HYDRAULIC BRAKE ACTUATORS INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit

More information

AGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm

AGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads.  Payload up to 100 kg. Compensation path XY up to ± 14 mm AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric

More information

Short-stroke cylinder, Series SSI Ports: M5 - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread

Short-stroke cylinder, Series SSI Ports: M5 - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread Ports: - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread 1 Standards ISO 15524 Compressed air connection Internal thread Ambient temperature min./max. - C / +80

More information

Series MI-01, MI-02, MI-03

Series MI-01, MI-02, MI-03 Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium

More information

Rotary actuators Rack-and-pinion gears series TRR. Brochure

Rotary actuators Rack-and-pinion gears series TRR. Brochure series TRR Brochure 2 Bosch Rexroth AG Pneumatics series TRR Rotary cylinder, Series TRR angle of rotation: 0-60 Ø2-00 mm with magnetic piston double piston with rack cushioning: pneumatically, adjustable

More information

ISO Cylinders Compact Cylinders TC08 Series Plastic Finger Tight Fittings

ISO Cylinders Compact Cylinders TC08 Series Plastic Finger Tight Fittings ISO 632 Cylinders ISO 15552 Cylinders Compact Cylinders TC08 Series Pilot Valves 207-208 209-212 213-21 215 TC15 Series Pilot Valves TC08 Series Solenoid Valves CD7 Series Solenoid Valves CD12 Series Solenoid

More information

Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:

Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials: Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread, 1 Standards NFE 49004 Compressed air connection Internal thread Ambient temperature min./max. -20 C / +80 C

More information

S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable

S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion

More information

Table of Contents. ISO/VDMA Series

Table of Contents. ISO/VDMA Series Table of Contents ISO/VDMA Series...3-22 Features and Benefits... 3 How to Order.... Technical Information... 5 Dimensions Profile Version...6-7 Tie-Rod Version...8-9 Mounting Parts...-16 Switches... 17

More information

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»

More information

Series 52 rodless cylinders 1/ Double-acting, magnetic, cushioned ø 25, 32, 40, 50, 63 mm

Series 52 rodless cylinders 1/ Double-acting, magnetic, cushioned ø 25, 32, 40, 50, 63 mm CATALOGUE > Release 8.8 > Series 52 cylinders Series 52 rodless cylinders Double-acting, magnetic, cushioned ø 25, 32, 40, 50, 63 mm»» Three main versions, Basic, Slide bearing and Roller bearing»» Extra

More information

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,

More information

Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm

Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different

More information

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm > Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI

More information

How to Order. Standard stroke (mm) ø10 15, 30, 45, 60

How to Order. Standard stroke (mm) ø10 15, 30, 45, 60 ingle Acting, ingle Rod, pring Return/Extend eries K ø, ø pring extend pring return B L D Without auto switch With auto switch mm mm Basic Axial foot Rod side flange Double clevis K L CDJ2K L How to Order

More information

ATL 12 ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. La =Lc + Stroke Lc T. Rear bracket SP. Stroke. Capacitor

ATL 12 ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. La =Lc + Stroke Lc T. Rear bracket SP. Stroke. Capacitor ACME SCREW LINEAR ACTUATOR Stroke OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor Rear bracket SP Pin Standard head with threaded hollow bore BA depth 17 Stroke end reed switches FCM Lenght Stroke 300

More information

Actuator LA29. Data sheet LINAK.COM/HOMELINE

Actuator LA29. Data sheet LINAK.COM/HOMELINE Actuator LA29 Data sheet LINAK.COM/HOMELINE LA29 The LA29 actuator is a HOMELINE actuator specially made for domestic applications. The actuator has a very short installation dimension as the distance

More information

M/46800/M, M/46800/HM, M/46800/PM

M/46800/M, M/46800/HM, M/46800/PM External guides for heavy loads over long distances Rigid, reinforced aluminium profile provides greater load support T-slots in the outer profile enable individual mounting options Precision guidance

More information

SRH. Application example. Pneumatic Swivel Heads Universal Swivel Head. Weight 2.1 kg kg. Axial force 800 N..

SRH.  Application example. Pneumatic Swivel Heads Universal Swivel Head. Weight 2.1 kg kg. Axial force 800 N.. SRH www.comoso.com Sizes 20.. 60 Weight 2.1 kg.. 21.2 kg Axial force 800 N.. 9000 N Torque 3.0 Nm.. 69.9 Nm Bending moment 10.4 Nm.. 340 Nm Application example Swivel head for the rapid loading and unloading

More information

Pneumatic. Cylindersʼ theoretic force. Ø 40 Ø 80 Ø 320. Stroke

Pneumatic. Cylindersʼ theoretic force. Ø 40 Ø 80 Ø 320. Stroke Bonesi Series Pneumatic Cylinders VMA 24562 ISO 6431 SERIES CX Light alloy end caps painted gray. Clean profile aluminium body gauged inside and outside. Bore size 32-40-50-63-80-100-125 Available with

More information

BALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS LENGTH

BALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS LENGTH BALL SCREW LINEAR ACTUATOR BSA 2 OVERALL DIMENSIONS Stroke La =Lc + Stroke Lc T Capacitor Rear bracket Pin SP Standard head with threaded hollow bore BA depth 7 Stroke end reed switches FCM (brake motor)

More information

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and

More information

/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting

/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting roduces a table cylinder non-rotating accuracy MXH / ø, ø, ø1, ø A table cylinder suitable for short pitch mounting Application example Auto switches offer numerous variations Reed switches, solid state

More information

Rodless cylinders Rodless cylinders Series RTC. Brochure

Rodless cylinders Rodless cylinders Series RTC. Brochure Series RTC Brochure Bosch Rexroth AG Pneumatics Series RTC Rodless cylinder, Series RTC-BV Ø 16-80 mm; double-acting; with magnetic piston; integrated guide; Basic Version; cushioning: pneumatic, adjustable

More information

Cam roller guide LF12S complete axis

Cam roller guide LF12S complete axis Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto

More information

M/ Rotary cylinders Rack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 125 mm

M/ Rotary cylinders Rack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 125 mm otary cylinders ack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 25 mm Suitable torques from,2 to 5,0 Nm/bar otation angles 90, 80, 270, 360 Adjustable cushioning Male and female

More information

Drive. Guide. Profile rail guide with ball circuit and wiper smooth torsion stiff. Intake flange. Adapter plate

Drive. Guide. Profile rail guide with ball circuit and wiper smooth torsion stiff. Intake flange. Adapter plate Linear Rail Slides Highlights Drive Double acting pneumatic cylinder maximum drive force in extend and retract movement pressure force up to 1 N Guide Profile rail guide with ball circuit and wiper smooth

More information

A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK

A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK Belt-driven rodless electric axis with a V-Lock interface. The structure features an extremely lightweight yet high-strength anodised aluminium extruded

More information

Parallel Grippers- DPW DIRECTCONNECT Wide Body Series

Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure

More information

Series Cylinders according to standard ISO 15552

Series Cylinders according to standard ISO 15552 Series 131-11 General This series of pneumatic cylinders is manufactured according to ISO 31 standards adapted to MA 2 and CNOMO/AFNOR 3 that guarantee the interchangeability of the cylinders even without

More information

Series OCG Pneumatic Cylinders

Series OCG Pneumatic Cylinders The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN

More information

Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting

Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,

More information

Large Bore Extruded Cylinders, ISO 6431 Series 41

Large Bore Extruded Cylinders, ISO 6431 Series 41 Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series

More information

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

More information

Hinge cylinders DW Key features

Hinge cylinders DW Key features Key features At a glance Hinge cylinder for clamping components during the welding process Easy assembly thanks to swivel bearing on the bearing cap Integrated flow control Integrated end-position cushioning

More information

P1Z Series Guided Version

P1Z Series Guided Version Rodless Pneumatic ylinder Magnetically oupled orrosion resistant Guide carriage and endcaps in anodized aluminium Load fixing by 4 tapped holes onto the guide carriage ylinder mounting End cap with mounting

More information

Series MGF ø40, ø63, ø100

Series MGF ø40, ø63, ø100 Guide Table Series MGF ø, ø, ø How to Order MGF Z7 Guide table Number of auto switches 2 S 1 Cylinder bore size/ Standard stroke,, 7,,, 7,,, 7, Auto switch Without auto switch * Refer to the table below

More information

Versions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve

Versions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve Type 367 Solenoid Valve Application Solenoid valve for controlling pneumatic linear actuators with NAMUR rib according to IEC 60534 or pneumatic rotary actuators with NAMUR interface according to VDI/VDE

More information

Compact cylinders ADN-S, AEN-S

Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Key features At a glance Without sintered bearing Free of copper Improved operating behaviour Due to precise manufacturing from a single piece

More information

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE) Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with

More information

Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.

Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod. eries /, 12,,,,,,, 3,, eries Variations eries eries Action Built-in magnet With air cushion tandard variations Built-in One-touch fitting With auto switch With strong scraper Page CX ouble acting -- CY

More information

Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25

Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»

More information

/2017. Swing sink clamping element double-acting

/2017. Swing sink clamping element double-acting Applications: integrated in press rams integrated in press beds in machine tools and equipment when the available space is limited when temperatures may reach 70 C For power units please see product group

More information

ACTUATOR LA31 PRODUCT DATA SHEET

ACTUATOR LA31 PRODUCT DATA SHEET PRODUCT DATA SHEET ACTUATOR LA31 Features: 12/24 V DC permanent magnet motor Thrust up to 6 N in push and up to 4 N in pull Electric chromated steel piston rod eye with slot High-strength plastic housing

More information

LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting

LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting > > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)

More information

Reed, Electronic. MOVEMENT > Series CST-CSV-CSH proximity switches GENERAL DATA

Reed, Electronic. MOVEMENT > Series CST-CSV-CSH proximity switches GENERAL DATA > Series CST-CSV-CSH proximity switches Series CST - CSV and CSH magnetic proximity switches Reed, Electronic»» Designed to fit into the grooves provided in the profile barrel of the cylinder»» The three

More information

CYLINDERS. Moving more than air

CYLINDERS. Moving more than air CYLINDRS 1 Moving more than air Content 1-2 1-2 page 1.1 Round cylinders 1.1.1 RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm 3 1.1.2 Accessories for round cylinders

More information

ISO CYLINDERS Ø ACTUATORS

ISO CYLINDERS Ø ACTUATORS ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration

More information

AIR CYLINDER Series A12, A13

AIR CYLINDER Series A12, A13 A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long

More information

Series 63 ISO cylinders

Series 63 ISO cylinders Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More

More information