STAUFF. Clamps. Local solutions for individual customers worldwide

Transcription

1 TAUFF Clamps Note: The changeover of the material code W3 from the surface finishing»carbon steel t 37, zinc plated«to the chromium(vi) free surface finishing»carbon steel t 37, zinc/nickel coated«will proceed gradually from April 2007 on. We apologise for the temporary occurrence of some mixed deliveries. Local solutions for individual customers worldwide

2 Walter tauffenberg Gmb & Co. KG P.O.ox Werdohl Germany Im Ehrenfeld Werdohl Germany Telephone: Facsimile: sales@stauff.com Internet: 50 Years of Experience Worldwide Distribution Prompt Delivery In most industrial countries TAUFF Clamps symbolise quick and easy pipe and hose installations as well as a clean distinct pipe layout. The vibration and noise reducing features are appreciated as being an important contribution to environmental protection. Apart from the technical sophistication of TAUFF Clamps, the second-to-none delivery, prompt service even for special constructions, TAUFF Clamps are also the most economical ones to install. TAUFF Clamps applications are almost unlimited. Due to the extraordinary wide product range, all areas of pipe, tube and hose installation are covered: Industrial ydraulics Mobile ydraulics Marine ydraulics Offshore General Industrial Pipe Construction Mining Industry Nuclear Reactor Construction Instrumentation and Control Technology Pneumatics TAUFF Clamps have been approved by: ureau Veritas Department of the Navy, New York Germanischer Lloyd Lloyd s Register of hipping Registro Italiano Navale TÜV United tates Coast Guard AUTRALIA TAUFF Corporation Pty. Ltd. P.O. ox 227 Unanderra, NW, Doyle Avenue Unanderra Wollongong, NW, 2526 Telephone: Facsimile: sales@stauff.com.au RAZIL TAUFF rasil Ltda. Avenida Gupê Galpão 2 - loco A arueri - ão Paulo CEP Telephone: Facsimile: stauff@stauffbrasil.com CANADA TAUFF Canada Ltd. 866 Milner Avenue carborough Ontario M1 5N7 Telephone: Facsimile: sales@stauffcanada.com CINA TAUFF International Trading (hanghai) Co., Ltd. hangdian Mansion, Pudong 551, Gaoke Road (W.) hanghai Telefon: Telefax: stauffsh@public.sta.net.cn FRANCE TAUFF.A. 230, Avenue du Grain d'or Z.I. de Vineuil - lois ud Vineuil-cedex Telephone: Facsimile: direction@stauffsa.com INDIA TAUFF India Pvt. Ltd. Gat. No Pune Nagar Road, Wagholi Pune, Telephone: Facsimile: sales@stauffindia.com IRELAND TAUFF Ireland Ltd. Unit 3 Weatherwell usiness Park Clondalkin Dublin 22 Telephone: Facsimile: sales@stauff.ie ITALY TAUFF Italia s.r.l. Viale Nuova Valassina 78 angolo Via aragiola sn Desio (Mi) Telephone: Facsimile: sales@stauff.it KOREA TAUFF Korea Ltd , Dadae-Dong aha-ku Pusan, Telephone: Facsimile: info@stauff.co.kr NEW ZEALAND TAUFF Corporation (NZ) Ltd. P. O. ox Greenmount, Auckland Unit D, 103 arris Road East Tamaki, Auckland Telephone: Facsimile: info@stauff.co.nz POLAND TAUFF Polska p. z o.o. ul. Rdestowa Gdynia Telephone: Facsimile: sales@stauff.pl RUIAN FEDERATION TAUFF LLC Office 205, uilding 7 11, charikopodschipnikovskaya Moscow, Telephone: and Facsimile: sales@stauff.ru UNITED KINGDOM TAUFF UK Ltd. 500, Carlisle treet East Off Downgate Drive heffield, 4 8 Telephone: Facsimile: sales@stauff.co.uk UNITED TATE OF AMERICA TAUFF Corporation 7 Wm. Demarest Place Waldwick, New Jersey Telephone: Facsimile: sales@stauffusa.com Distributors and warehouses in all industrial countries. 2

3 INDEX PIPE, TUE AND OE CLAMP Page Profile, Approvals and Register of Establishments 2 Index 3 TANDARD ERIE Order Codes - Components 4 / 5 / 6 according to DIN 3015, Part 1 Dimensions - Components 7 / 8 / 9 (for Pipe O.D. 6 to 102 mm) Complete Clamps Order Codes 10 / 11 / 12 EAVY ERIE Order Codes - Components 13 / 14 / 15 according to DIN 3015, Part 2 Dimensions - Components 16 / 17 / 18 (for Pipe O.D. 6 to 450 mm) Complete Clamps Order Codes 19 / 20 / 21 TWIN ERIE Order Codes - Components 22 / 23 according to DIN 3015, Part 3 Dimensions - Components 24 / 25 (for Pipe O.D. 6 to 42 mm) Complete Clamps Order Codes 26 / 27 PECIAL CLAMP / ACCEORIE RI-Clamps (Pipe Clamps with Rubber Insert) 28 eavy eries - Twin Design 29 Multi Group Weld Plate RAP-MGR 30 Angled, ridge and Elongated Weld Plates, afety Washers 31 Adjustment Clamp, Agricultural Clamp 31 i-clean Clamps and Accessories 31 Clamps for Industrial Electric Applications and Cables 32 addle Clamps for Cylinder upply Lines 33 CUTOM DEIGNED CLAMP Machined Versions 34 Injection Moulding Versions 35 LIGT ERIE L 36 LG LU 37 LN 38 LNGF LNUF 39 CONTRUCTION ERIE K KV DK DKV 40 FLAT TEEL U-OLT CLAMP F RUK 41 ROUND TEEL U-OLT CLAMP R RUK 42 R RUL 43 RD according to DIN 3570, Type A 44 CLAMP ACCORDING TO DIN DIN 3567, Type A 45 DIN 3567, Type 45 DIN DIN DIN DIN TECNICAL APPENDIX Design of Clamp odies 48 Installation Information 49 tandard Materials: Properties and Technical Information 50 pecial Materials: Properties and Technical Information 51 Recommended Distance between Clamps 52 asic Mounting Instructions 52 Thread Chart: Metric vs. UNC Thread 52 Tightening Torques and Maximum Loads in Pipe Direction 53 General Information / Terms of Liability 53 3

4 PIPE CLAMP - TANDARD ERIE ORDER CODE - COMPONENT according to DIN 3015, Part 1 ALO AVAILALE Extensive range of special clamping systems and accessories, e.g. for noise and vibration reducing installation, for electric applications and cables or for particular mounting purposes CLAMP ODY consisting of two clamp halves INGLE WELD PLATE P ELONGATED WELD PLATE PV CANNEL RAIL ADAPTOR CRA see pages 28 to 32 Custom designed pipe clamps (machined and injection moulding versions) according to customer`s specifications or based on TAUFF developments Group 1 Group 1 Group 1 suitable for several types of channel rails, see page 12 see pages 34 to 35 MATERIAL & URFACE CODE (ALL DIPLAYED OPTION ARE TANDARD DELIVERY) Group 1A -8 EE COMPONENT PART IDENTIFICATION Group 1A -8 Group 1A -8 W2 W2 W3 ORDERING INFORMATION, P PV CRA 1-8 TAUFF GROUP DIN GROUP OUTIDE DIAMETER PIPE / TUE / OE IN MM OUTIDE DIAMETER PIPE / TUE / OE IN INC NOMINAL ORE PIPE IN INC TAUFF GROUP OUTIDE DIAMETER OF PIPE IN MM MATERIAL & DEIGN OF CLAMP ODY INGLE WELD PLATE P TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE INGLE WELD PLATE PV TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE CANNEL RAIL ADAPTOR CRA TYPE OF TREAD MATERIAL & URFACE 1 1A ,4 1 /4 106,4 8 5 / ,5 3 /8 109, / A 6,4 1 /4 106,4A 8 5 /16 108A 9,5 3 /8 109,5A 10 1 /8 110A A 12,7 1 /2 212,7 13,5 1 /4 213, / ,2 3 /8 217, / ,3 1 /2 321, / , ,4 26,9 3 /4 426, / , , / / ,5 1 3 /4 644,5 48,3 1 1 /2 648,3 50, ,8 57,2 2 1 /4 757,2 60, ,3 63,5 2 1 /2 763, / /2 except DIN EN , /2 DIN EN only 776,1 88,9 3 1 / , L P 1 P 1A P 2 P 3 P 4 P 5 P 6 P 7 P 8 PV 1 PV 1A PV 2 PV 3 PV 4 PV 5 PV 6 PV 7 PV 8 CRA 1-8 4

5 PIPE CLAMP - TANDARD ERIE ORDER CODE - COMPONENT according to DIN 3015, Part 1 TWIN WELD PLATE DP GROUP WELD PLATE RAP COVER PLATE DP EXAGON EAD OLT A INERT E EXAGON EAD OLT AE OCKET CAP CREW I LOTTED EAD CREW LI TACKING OLT AF DIN EN IO 4014 / 4017 (DIN 931/933) no cover plate DIN EN IO 4762 (DIN 912) DIN EN IO 1207 (DIN 84) Group 1 Group 1 Group 1 for use with COVER PLATE DP for use with INERT E Group 1A -6 Group 1A -6 Group 1A -8 W2 W1 W3 W3 TEEL / PLATIC W3 W3 W3 W3 DP / RAP / / DP A E AE I LI AF TWIN WELD PLATE DP TAUFF GROUP PIPE CENTER PACING TYPE OF TREAD MATERIAL & URFACE GROUP WELD PLATE RAP TAUFF GROUP PIPE CENTER PACING PLEAE TURN TE PAGE ERE NUMER OF CLAMP TYPE OF TREAD MATERIAL & URFACE COVER PLATE DP TAUFF GROUP MATERIAL & URFACE EXAGON EAD OLT A TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE INERT E MATERIAL (/P) EXAGON EAD OLT AE TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE OCKET EAD CREW I TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE LOTTED EAD CREW LI TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE TACKING OLT AF TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE DP 1/40 RAP 1/30/10 DP 1A/37 RAP 1A/37/10 DP 2/44 RAP 2/44/10 DP 1 DP 1A DP 2 A 1 M (M6 x 30) A 1A M (M6 x 30) A 2 M (M6 x 35) E for teel P for Plastic AE 1 M (M6 x 27) AE 1A M (M6 x 27) AE 2 M (M6 x 32) I 1 M (M6 x 20) I 1A M (M6 x 20) I 2 M (M6 x 25) LI 1 M (M6 x 20) LI 1A M (M6 x 20) LI 2 M (M6 x 25) AF 1 AF 1A AF 2 DP 3/52 RAP 3/52/10 DP 3 A 3 M (M6 x 40) AE 3 M (M6 x 35) I 3 M (M6 x 30) LI 3 M (M6 x 30) AF 3 DP 4/60 RAP 4/60/5 DP 4 A 4 M (M6 x 45) AE 4 M (M6 x 42) I 4 M (M6 x 35) LI 4 M (M6 x 35) AF 4 DP 5/75 RAP 5/75/5 DP 5 A 5 M (M6 x 60) AE 5 M (M6 x 57) I 5 M (M6 x 50) LI 5 M (M6 x 50) AF 5 DP 6/90 RAP 6/90/5 DP 6 A 6 M (M6 x 70) AE 6 M (M6 x 65) I 6 M (M6 x 60) LI 6 M (M6 x 60) AF 6 DP 7 A 7 M (M6 x 100) I 7 M (M6 x 90) AF 7 DP 8 A 8 M (M6 x 125) I 8 M (M6 x 110) AF 8 5

6 PIPE CLAMP - TANDARD ERIE ORDER CODE - COMPONENT according to DIN 3015, Part 1 AFETY WAER I AFETY LOCKING PLATE IG MOUNTING RAIL T EXAGON RAIL NUT M COMPONENT PART IDENTIFICATION FOR TANDARD ERIE CLAMP ODIE AND COMPONENT DIN 93 CLAMP ODY for use with EXAGON EAD OLT A Group 1 Group 1A -6 W3 W3 W1 W1 I 6,4 IG T - M1-8/1D AFETY WAER I MATERIAL & URFACE AFETY LOCKING PLATE IG TAUFF GROUP MATERIAL & URFACE IG 1 IG 1A MOUNTING RAIL T EIGT OF RAIL IN MM LENGT OF RAIL IN M MATERIAL & URFACE EXAGON RAIL NUT M TYPE OF TREAD MATERIAL & URFACE MATERIAL DEIGN COLOUR CODE Polypropylene profiled inside, green with tension Polypropylene smooth inside, green without tension Polyamide profiled inside, black with tension Polyamide smooth inside, black without tension antoprene profiled inside, black with tension antoprene smooth inside, black without tension Aluminium profiled inside, aluminium with tension Aluminium is available up to TAUFF Group 6 only. Alternative materials, designs and colours in addition to the above stated standard are available upon request. METAL PART PP PP PA PA A A AL MATERIAL URFACE CODE carbon steel t37 carbon steel t37 untreated phosphated carbon steel t 37 zinc/nickel coated* stainless steel A / (AII 304) stainless steel A / (AII 316/316Ti) Alternative materials and surface finishings in addition to the above stated standard are available upon request. W1 W2 W3 W4 W5 IG 2 TREADED PART I 6,4 IG 3 T - available heigths: 11, 14 and 30 mm M1-8/1D TYPE OF TREAD Metric Thread UNC Thread CODE M U IG 4 available lengths: 1m and 2 m All threaded parts are available with Metric or UNC Thread on request. IG 5 IG 6 IG 7 * Note: The changeover of the material code W3 from the surface finishing»carbon steel t 37, zinc plated«to the chromium(vi) free surface finishing»carbon steel t 37, zinc/nickel coated«will proceed gradually from April 2007 on. We apologise for the temporary occurrence of some mixed deliveries. IG 8 6

7 PIPE CLAMP - TANDARD ERIE DIMENION - COMPONENT according to DIN 3015, Part 1 MATERIAL & URFACE OF METAL PART CLAMP ODY consisting of two clamp halves INGLE WELD PLATE P ELONGATED WELD PLATE PV carbon steel t37, untreated W1 ø D 1 L1 ø D 2 carbon steel t37, phosphated W2 ø D L 3 L 2 L1 carbon steel t37, zinc/nickel coated* W3 10 L 2 L 2 L1 ø D 1 stainless steel A / W4 (AII304) Group 1 Group 1 Group 1 stainless steel A / W5 (AII316/316Ti) ø D 1 ø D 2 Alternative materials and surface finishings in addition to the above stated standard are available upon request. ø D L 2 L 1 ø D 1 L 2 L 3 L 1 L 2 * Please see note on page 6. L 1 Group 1A -8 Group 1A -8 Group 1A -8 MATERIAL & URFACE CODE EE COMPONENT PART IDENTIFICATION W2 W2 TAUFF GROUP 1 1A DIN GROUP OUTIDE DIAMETER PIPE IN MM ØD1 6 6,4 8 9, ,4 8 9, ,7 13, , , ,4 26, , ,5 48,3 50,8 57,2 60,3 63, ,1 88,9 102 Inside urface profiled smooth L1 L2 Width 28 9,5 27 0, , , ,6 35, ,6 41, ,8 56, ,8 64, , , L1 L2 ØD L1 L2 L3 ØD1 ØD2 31, , , , , , , , , , , ,5 12 6, ,5 12 6, ,5 12 6, ,5 12 6, ,5 12 6, ,5 12 6, ,5 12 6, ,5 12 6, ,5 12 6,5 7

8 PIPE CLAMP - TANDARD ERIE DIMENION - COMPONENT according to DIN 3015, Part 1 CANNEL RAIL ADAPTOR CRA TWIN WELD PLATE DP GROUP WELD PLATE RAP COVER PLATE DP EXAGON EAD OLT A suitable for several types of channel rails, see page 12 L 3 ø D L 2 L 1 L 3 ø D L 2 23,5 L 1 Group 1 Group 1 L 2 L 1 G ø D L 2 ø D L L 3 L 1 ø D DIN EN IO 4014 / 4017 (DIN 931/933) L 2 L 1 Group 1 for use with COVERPLATE DP L 2 L 3 ø D L 2 L L L 1 G Group 1A -6 Group 1A -6 Group 1A -8 W3 W2 W1 W3 W3 G L 1 2 L1 L2 L3 ØD L1 L2 L3 ØD L1 L2 ØD G x L , , , M6 x , , M6 x , , , M6 x 35 M , , , M6 x , , M6 x , , M6 x , , M6 x M6 x M6 x 125 8

9 PIPE CLAMP - TANDARD ERIE DIMENION - COMPONENT according to DIN 3015, Part 1 INERT E EXAGON EAD OLT AE OCKET CAP CREW I LOTTED EAD CREW LI TACKING OLT AF AFETY WAER I AFETY LOCKING PLATE IG MOUNTING RAIL T EXAGON RAIL NUT M DIN EN IO 4762 (DIN 912) DIN EN IO 1207 (DIN 84) 2 1 D D W L L L 3 L L 11 G 1 2 no cover plate Group 1 T 11 for use with INERT E M6 D2 L T 14 ød L 1 D1 G G G G ø D L 30 2 L Group 1A -8 T 30 TEEL / PLATIC W3 W3 W3 W3 W3 W3 W1 W1 D1 D2 G x L G x L D G x L D G L1 L2 L3 W ØD L L 1 2 ØD M6 x 27 M6 x ,8 M6 x ,8 M ,2 1 M6 x 27 M6 x ,8 M6 x ,8 M ,2 1 M6 x 32 M6 x ,8 M6 x ,8 M ,2 1 11,8 6,5 7,8 () 8,6 (P) M6 x 35 M6 x ,8 M6 x ,8 M , , ,5 10,2 13,5 5,5 12 M6 x 42 M6 x ,8 M6 x ,8 M ,2 1 M6 x 57 M6 x ,8 M6 x ,8 M ,2 1 M6 x 65 M6 x ,8 M6 x ,8 M ,2 1 M6 x ,8 M ,2 1 M6 x ,8 M ,2 1 9

10 PIPE CLAMP - TANDARD ERIE ORDER CODE - COMPLETE CLAMP according to DIN 3015, Part 1 ➀ ➁, ➂ ➃ - ➄ ➅ W ➆ ➀ TYPE OF INTALLATION ➂ MATERIAL & DEIGN OF CLAMP ODY * 1 ➃ MOUNTING & FITTING COMINATION ➆ AEMLING & PACKAGING no code P PV CRA DP RAP M * 3 * 3 without mounting plate, rail adaptor or rail nuts ingle Weld Plate Elongated Weld Plate Channel Rail Adaptor Twin Weld Plate Group Weld Plate exagon Rail Nut PP PP PA PA A A AL * 2 Polypropylene, profiled inside, with tension Polypropylene, smooth inside, without tension Polyamide, profiled inside, with tension Polyamide, smooth inside, without tension antoprene, profiled inside, with tension antoprene, smooth inside, without tension Aluminium, profiled inside, with tension DP - A Cover Plate / exagon ead olt DP - I Cover Plate / ocket Cap crew AE Insert EP-E / exagon ead olt (without Cover Plate) I ocket Cap crew with washer LI lotted ead crew * 3 with washer IG - AF afety Locking Plate / tacking olt no code A K components supplied separately (standard) assembled (optional) packed in kits (optional) ➁ Group TAUFF 1 DIN 0 TAUFF 1A DIN 1 TAUFF 2 DIN 2 TAUFF 3 DIN 3 Tube O.D. in mm Tube O.D. in inch 4 4 Nominal ore Pipe TAUFF GROUP & IZE OF CLAMP ODY Material Code Clamp ody (both halves) ,4 1 /4 106,4 8 5 / ,5 3 /8 109, / A 6,4 1 /4 106,4A 8 5 /16 108A 9,5 3 /8 109,5A 10 1 /8 110A A 12,7 1 /2 212,7 13,5 1 /4 213, / ,2 3 /8 217, / ,3 1 /2 321, / , ,4 26,9 3 /4 426, ➁ Group TAUFF 5 DIN TAUFF 7 DIN Tube O.D. in mm Tube O.D. in inch Nominal ore Pipe TAUFF GROUP & IZE OF CLAMP ODY CONTINUATION Material Code Clamp ody (both halves) / , , / / ,5 1 3 /4 644,5 48,3 1 1 /2 648,3 50, ,8 57,2 2 1 /4 757,2 60, ,3 63,5 2 1 /2 763, / / , /2 776,1 88, , L * 4 * 5 ➄ M U TYPE OF TREAD Metric Thread UNC Thread ➅ W1 W2 W3 W4 W5 W10 W11 MATERIAL & URFACE OF METAL PART * 6 all parts are untreated all parts are phosphated all parts are zinc/nickel coated* all metal parts made of stainless steel A / (AII 304) all metal parts made of stainless steel A / (AII 316/316Ti) weld plate phosphated, all other parts zinc/nickel coated* rail nut untreated, all other parts zinc/nickel coated* TECNICAL NOTE * NOTE: TE CANGEOVER OF TE MATERIAL CODE W3 FROM TE URFACE»CARON TEEL T 37, ZINC PLATED«TO TE CROMIUM(VI) FREE URFACE»CARON TEEL T 37, ZINC/NICKEL COATED«WILL PROCEED GRADUALLY FROM APRIL 2007 ON. WE APOLOGIE FOR TE TEMPORARY OCCURRENCE OF OME MIXED DELIVERIE. 1 EE MATERIAL PROPERTIE ON PAGE 52. OTER CLAMP ODY MATERIAL * AND COLOUR ARE AVAILALE UPON REQUET. 2 AVAILALE FOR TAUFF GROUP 1A TO 6 ONLY. (DIN GROUP 1 TO 6). * 3 AVAILALE FOR TAUFF GROUP 1 TO 6 ONLY. (DIN GROUP 0 TO 6). * * * * 4 NOMINAL ORE, EXCEPT DIN EN NOMINAL ORE, ONLY DIN EN INDIVIDUAL COMINATION OF ALTERNATIVE URFACE AND PECIAL PROPERTY MATERIAL ARE AVAILALE UPON REQUET. 10

11 PIPE CLAMP - TANDARD ERIE ORDER CODE - COMPLETE CLAMP according to DIN 3015, Part 1 P 212,7 PP DP-A M W10 P 212,7 PP I M W10 P 212,7 PP LI M W10 2x exagon ead olt urface: W3 1x Cover Plate urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm 1x ingle Weld Plate urface: W2 W10 is standard for this type of installation. 2x ocket Cap crew with washer urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm 1x ingle Weld Plate urface: W2 W10 is standard for this type of installation. 2x lotted ead crew with washer urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm 1x ingle Weld Plate urface: W2 W10 is standard for this type of installation. PV 212,7 PP DP-A M W10 PV 212,7 PP I M W10 PV 212,7 PP LI M W10 PLEAE TURN TE PAGE ERE 2x exagon ead olt urface: W3 1x Cover Plate urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm 1x Elongated Weld Plate urface: W2 2x ocket Cap crew with washer urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm 1x Elongated Weld Plate urface: W2 2x lotted ead crew with washer urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm 1x Elongated Weld Plate urface: W2 W10 is standard for this type of installation. W10 is standard for this type of installation. W10 is standard for this type of installation. M 212,7 PP DP-A M W11 M 212,7 PP I M W11 M 212,7 PP LI M W11 2x exagon ead olt urface: W3 1x Cover Plate urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm 2x exagon Rail Nut urface: W1 W11 is standard for this type of installation. 2x ocket Cap crew with washer urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm 2x exagon Rail Nut urface: W1 W11 is standard for this type of installation. 2x lotted ead crew with washer urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm 2x exagon Rail Nut urface: W1 W11 is standard for this type of installation. 11

12 PIPE CLAMP - TANDARD ERIE ORDER CODE - COMPLETE CLAMP according to DIN 3015, Part 1 212,7 PP DP-A M W3 212,7 PP I M W3 212,7 PP LI M W3 2x exagon ead olt urface: W3 1x Cover Plate urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm 2x ocket Cap crew with washer urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm 2x lotted ead crew with washer urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm W3 is standard for this type of installation. W3 is standard for this type of installation. W3 is standard for this type of installation. 212,7 PP IG-AF M W3 P 106 PP DP-A M W PP IG-AF M W3 2x tacking olt urface: W3 1x afety Locking Plate urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm W3 is standard for this type of installation. 1x exagon ead olt urface: W3 1x Cover Plate urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 1 DIN 0 Pipe-O.D.6 mm 1x ingle Weld Plate urface: W2 W10 is standard for this type of installation. 1x tacking olt urface: W3 1x afety Locking Plate urface: W3 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 1 DIN 0 Pipe-O.D.6 mm W3 is standard for this type of installation. P 212,7 PP DP-A M W10 2x exagon ead olt urface: W3 1x Cover Plate urface: W3 1x Clamp (two halves) Design: smooth inside, without tension Group: TAUFF 2 DIN 2 Pipe-O.D.12,7 mm 1x ingle Weld Plate urface: W2 W10 is standard for this type of installation. NOTE REGARDING TE UE OF TE CANNEL RAIL ADAPTOR CRA The CANNEL RAIL ADAPTOR Type CRA is suitable for the following channel rails: UNITRUT-Rails P1000, P1000T, P1000V, P1000VT, P1001 P2000, P2000T P3003, P3003T, P3300V, P3300VT, P3301 P4000, P4000T P5000, P5000T, P5001, P5500, P5500T, P5501 ALFEN-Rails M 41/41 ZA 41/22 ZM 41/41 ZM 41/22 L 41/41, L 41/2 12

13 PIPE CLAMP - EAVY ERIE ORDER CODE - COMPONENT according to DIN 3015, Part 2 ALO AVAILALE Extensive range of special clamping systems and accessories, e.g. for noise and vibration reducing installation, for electric applications and cables or for particular mounting purposes see pages 28 to 32 CLAMP ODY consisting of two clamp halves WELD PLATE FOR INGLE CLAMP PAL WELD PLATE FOR DOULE CLAMP PA Custom designed pipe clamps (machined and injection moulding versions) according to customer`s specifications or based on TAUFF developments see pages 34 to 35 MATERIAL & URFACE CODE (ALL DIPLAYED OPTION ARE TANDARD DELIVERY) EE COMPONENT PART IDENTIFICATION 3-07: W2 8-12: W1 3-07: W2 8-12: W1 ORDERING INFORMATION, PAL PA TAUFF GROUP DIN GROUP O.D. OF PIPE / TUE / OE IN MM O.D. OF PIPE / TUE / OE IN INC NOMINAL ORE PIPE IN INC TAUFF GROUP (EE ELOW) OUTIDE DIAMETER IN MM MATERIAL & DEIGN OF CLAMP ODY ,4 1 /4 3006,4 8 5 / ,5 3 /8 3009, / ,7 1 /2 3012,7 13,5 1 /4 3013, / ,2 3 /8 3017, / ,3 1 /2 4021, / , ,4 26,9 3 /4 4026, / , , / / / / ,5 1 3 /4 6044,5 48,3 1 1 /2 6048,3 50, , / , ,3 63,5 2 1 /2 6063, / /8 2 1 /2 except DIN EN , /2 DIN EN only 7076, ,5 3 1 /4 7082,5 88,9 3 1 / ,9 88,9 3 1 / , / / / / / / , ,8 193,7 7 5 / , / WELD PLATE FOR INGLE CLAMP PAL TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE PAL 3 PAL 4 PAL 5 PAL 6 PAL 7 PAL 8 PAL 9 PAL 10 PAL 11 PAL 12 WELD PLATE FOR DOULE CLAMP PA TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE PA 3 PA 4 PA 5 PA 6 PA 7 PA 8 PA 9 PA 10 PA 11 PA 12 13

14 PIPE CLAMP - EAVY ERIE ORDER CODE - COMPONENT according to DIN 3015, Part 2 CANNEL RAIL ADAPTOR CRA ELONGATED WELD PLATE FOR INGLE CLAMP PAL/DUE COVER PLATE FOR INGLE CLAMP DPAL COVER PLATE FOR DOULE CLAMP DPA EXAGON EAD OLT A OCKET CAP CREW I TACKING OLT AF suitable for several types of channel rails, see page 21 DIN EN IO 4014 / 4017 (DIN 931/933) DIN EN IO 4762 (DIN 912) Group 3-6 Group 3-6 Group 3-10 W3 CRA 3-07: W2 8-12: W1 PAL/DUE 3-07: W2 8-12: W1 DPAL 3-07: W2 8-12: W1 DPA W1 W1 W2 A I AF CANNEL-RAIL- ADAPTOR CRA TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE ELONGATED WELD PLATE FOR INGLE CLAMP PAL/DUE TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE COVER PLATE FOR INGLE CLAMP DPAL TAUFF GROUP MATERIAL & URFACE COVER PLATE FOR DOULE CLAMP DPA TAUFF GROUP MATERIAL & URFACE EXAGON EAD OLT A TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE OCKET CAP CREW I TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE TACKING OLT AF TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE CRA 3 M for use with bolt M10 x 40 PAL/DUE 3 DPAL 3 DPA 3 A 3 M (M10 x 45) I 3 M (M10 x 30) AF 3 CRA 4 M for use with bolt M10 x 55 PAL/DUE 4 DPAL 4 DPA 4 A 4 M (M10 x 60) I 4 M (M10 x 40) AF 4 CRA 5 M for use with bolt M10 x 65 PAL/DUE 5 DPAL 5 DPA 5 A 5 M (M10 x 70) I 5 M (M10 x 50) AF 5 CRA 6 M for use with bolt M12 x 100 PAL/DUE 6 DPAL 6 DPA 6 A 6 M (M12 x 100) I 6 M (M12 x 80) AF 6 PAL/DUE 7 DPAL 7 DPA 7 A 7 M (M16 x 130) AF 7 PAL/DUE 8 DPAL 8 DPA 8 A 8 M (M20 x 190) AF 8 PAL/DUE 9 DPAL 9 DPA 9 A 9 M (M24 x 220) AF 9 PAL/DUE 10 DPAL 10 DPA 10 A 10 M (M30 x 300) AF 10 PAL/DUE 11 DPAL 11 DPA 11 A 11 M (M30 x 450) PAL/DUE 12 DPAL 12 DPA 12 A 12 M (M30 x 560) 14

15 PIPE CLAMP - EAVY ERIE ORDER CODE - COMPONENT according to DIN 3015, Part 2 AFETY WAER I AFETY LOCKING PLATE IP MOUNTING RAIL TV MOUNTING RAIL NUT GMV COMPONENT PART IDENTIFICATION FOR EAVY ERIE CLAMP ODIE AND COMPONENT DIN 93 for use with EXAGON EAD OLT A 3-07: W3 W2 8-10: W1 W1 W3 I AFETY WAER I INNER DIAMETER MATERIAL & URFACE I 10,5 Group 3-10 up to Group 6 up to Group 6 IP AFETY LOCKING PLATE IP TAUFF GROUP IP 3 MATERIAL & URFACE TV MOUNTING RAIL TV LENGT OF RAIL IN M MATERIAL & URFACE GMV MOUNTING RAIL NUT GMV TAUFF GROUP (3-5 OR 6) TYPE OF TREAD MATERIAL & URFACE CLAMP ODY MATERIAL DEIGN COLOUR CODE Polypropylene profiled inside, green with tension Polypropylene smooth inside, green without tension Polyamide profiled inside, black with tension Polyamide smooth inside, black without tension antoprene profiled inside, black with tension antoprene smooth inside, black without tension Aluminium profiled inside, aluminium with tension PP, PA, A and A are available up to TAUFF Group 6 only. Alternative materials, designs and colours in addition to the above stated standard are available upon request. PP PP PA PA A A AL METAL PART MATERIAL URFACE CODE I 10,5 I 10,5 IP 4 IP 5 TV available lengths: 1m and 2m GMV 3-5 carbon steel t37 carbon steel t37 carbon steel t37 untreated phosphated zinc/nickel coated* stainless steel A / (AII 304) stainless steel A / (AII 316/316Ti) W1 W2 W3 W4 W5 Alternative materials and surface finishings in addition to the above stated standard are available upon request I 13 IP 6 GMV 6 TREADED PART TYPE OF TREAD Metric Thread UNC Thread CODE M U I 17 IP 7 All threaded parts are available with Metric or UNC Thread on request. I 21 IP 8 I 25 IP 9 I 31 I 31 IP 10 * Note: The changeover of the material code W3 from the surface finishing»carbon steel t 37, zinc plated«to the chromium(vi) free surface finishing»carbon steel t 37, zinc/nickel coated«will proceed gradually from April 2007 on. We apologise for the temporary occurrence of some mixed deliveries. I 31 15

16 PIPE CLAMP - EAVY ERIE DIMENION - COMPONENT according to DIN 3015, Part 2 MATERIAL & URFACE OF METAL PART CLAMP ODY consisting of two clamp halves WELD PLATE FOR INGLE CLAMP PAL WELD PLATE FOR DOULE CLAMP PA carbon steel t37, untreated carbon steel t37, phosphated carbon steel t37, zinc/nickel coated* W1 W2 W3 stainless steel A / (AII304) W4 stainless steel A / W5 (AII316/316Ti) L 2 L 1 ø D 1 ø D 1 G L 1 L 2 ø D 1 G L 1 L *Please see note on page 15. MATERIAL & URFACE CODE EE COMPONENT PART IDENTIFICATION 3-07: W2 8-12: W1 3-07: W2 8-12: W1 TAUFF GROUP DIN GROUP O.D. OF PIPE / TUE / OE Ø D1 IN MM PP/PA L1 AL L2 Inside urface profiled smooth Width L1 L2 G ød1 L1 L2 1 2 G ød ,4 8 9, ,7 13, , , ,4 26, , ,5 48,3 50, ,3 63, , ,5 88,9 88, ,8 193, ,6 30,5 30, ,6 46,5 30, , , M M M M M M M M M M ,5 8 8 M ,5 8 8 M ,5 8 8 M M M M M M M M

17 PIPE CLAMP - EAVY ERIE DIMENION - COMPONENT according to DIN 3015, Part 2 CANNEL RAIL ADAPTOR CRA ELONGATED WELD PLATE FOR INGLE CLAMP PAL/DUE COVER PLATE FOR INGLE CLAMP DPAL COVER PLATE FOR DOULE CLAMP DPA G 2 ø D 2 ø D 1 G ø D ø D 1 L Group 3-6 L 1 L 3 L 2 L 1 L 2 L 1 L W3 3-07: W2 8-12: W1 3-07: W2 8-12: W1 3-07: W2 8-12: W1 G L 1 2 L1 L2 L3 G ød1 ød2 L1 L2 ød L1 L2 1 2 ød M PLEAE TURN TE PAGE ERE M ,5 27, M M M , M M M M M M M

18 PIPE CLAMP - EAVY ERIE DIMENION - COMPONENT according to DIN 3015, Part 2 EXAGON EAD OLT A OCKET CAP CREW I TACKING OLT AF AFETY WAER I AFETY LOCKING PLATE IP MOUNTING RAIL TV MOUNTING RAIL NUT GMV DIN EN IO 4014 / 4017 (DIN 931/933) L DIN EN IO 4762 (DIN 912) L G W L 2 L 1 DIN 93 for use with EXAGON EAD OLT A L 1 L ø D1 G ø D2 G G G Group 3-6 Group 3-10 Group 3-10 up to Group 6 up to Group 6 W1 W1 W2 W3 L 3 ø D : W2 8-10: W1 W1 W3 G x L G x L G L1 L2 L3 W ød L1 L ød1 ød G M10 x 45 M10 x 30 M , ,2 8 M10 x 60 M10 x 40 M , , M 17, ,6 7,4 10 M10 x 70 M10 x 50 M , ,2 8 M12 x 100 M12 x 80 M , ,2 10 M 19, ,8 8,2 12 M16 x 130 M , M20 x 190 M , M24 x 220 M , M30 x 300 M , M30 x ,0 M30 x ,0 18

19 PIPE CLAMP - EAVY ERIE ORDER CODE - COMPLETE CLAMP according to DIN 3015, Part 2 ➀ ➁, ➂ ➃ - ➄ ➅ W ➆ ➀ TYPE OF INTALLATION no code without mounting plate, rail adaptor or rail nuts PAL Weld Plate for ingle Clamps PA Weld Plate for Double Clamps PAL/DUE Elongated Weld Plate for ingle Clamps CRA GMV ➁ Group TAUFF 3 DIN 1 TAUFF 4 DIN 2 TAUFF 5 DIN 3 TAUFF 6 DIN 4 * 2 * 3 * 2 Tube O.D. in mm Tube O.D. in inch Channel Rail Adaptor Mounting Rail Nut Nominal ore Pipe TAUFF GROUP & IZE OF CLAMP ODY Material Code Clamp ody (both halves) ,4 1 /4 3006,4 8 5 / ,5 3 /8 3009, / ,7 1 /2 3012,7 13,5 1 /4 3013, / ,2 3 /8 3017, / ,3 1 /2 4021, / , ,4 26,9 3 /4 4026, / , , / / / / ,5 1 3 /4 6044,5 48,3 1 1 /2 6048,3 50, , / ➂ PP PP PA PA A A AL ➁ Group 6 4 TAUFF 7 DIN 5 TAUFF 8 DIN 6 TAUFF 9 DIN MATERIAL & DEIGN OF CLAMP ODY * 1 Polypropylene, profiled inside, with tension Polypropylene, smooth inside, * 2 without tension Polyamide, profiled inside, with tension Polyamide, smooth inside, * 2 without tension antoprene, profiled inside, with tension antoprene, smooth inside, without tension Aluminium, profiled inside, with tension * 2 * 2 Tube O.D. in mm Tube O.D. in inch Nominal ore Pipe TAUFF GROUP & IZE OF CLAMP ODY CONTINUATION Material Code Clamp ody (both halves) 60, ,3 63,5 2 1 /2 6063, /8 2 1 / , /2 7076, ,5 3 1 /4 7082,5 88, ,9 88, , / / / / / / , ,8 193,7 7 5 / , / * 5 * 6 ➃ I MOUNTING & FITTING COMINATION ocket Cap crew IP - AF afety Locking Plate / tacking olt ➄ M U TYPE OF TREAD DPAL - A ingle Cover Plate / exagon ead olt DPA - A Double Cover Plate / exagon ead olt DPAL - I ingle Cover Plate / ocket Cap crew * 2 * 4 Metric Thread UNC Thread ➆ no code A K ➅ W1 W2 W3 W4 W5 W10 W12 W13 W15 W16 W17 W18 W19 AEMLING & PACKAGING components supplied separately (standard) assembled (optional) packed in kits (optional) MATERIAL & URFACE OF METAL PART * 7 all parts are untreated all parts are phosphated all parts are zinc/nickel coated* all metal parts made of stainless steel A / (AII 304) all metal parts made of stainless steel A / (AII 316/316Ti) weld plate phosphated, all other parts zinc/nickel coated* weld plate and cover plate phosphated, bolts untreated rail nut zinc/nickel coated*, cover plate phosphated, bolts untreated weld plate and cover plate phosphated, bolts zinc/nickel coated* rail nut zinc/nickel coated*, cover plate phosphated, bolts zinc/nickel coated* safety locking plate phosphated, stacking bolts zinc/nickel coated* safety locking plate untreated, stacking bolts phosphated cover plate phosphated, bolts untreated TECNICAL NOTE * NOTE: TE CANGEOVER OF TE MATERIAL CODE W3 FROM TE URFACE»CARON TEEL T 37, ZINC PLATED«TO TE CROMIUM(VI) FREE URFACE»CARON TEEL T 37, ZINC/NICKEL COATED«WILL PROCEED GRADUALLY FROM APRIL 2007 ON. WE APOLOGIE FOR TE TEMPORARY OCCURRENCE OF OME MIXED DELIVERIE. 1 EE MATERIAL PROPERTIE ON PAGE 52. OTER CLAMP ODY MATERIAL AND COLOUR ARE AVAILALE UPON REQUET. * 2 AVAILALE FOR TAUFF GROUP 3 TO 6 ONLY (DIN GROUP 1 TO 4). * * * * * * 3 PECIAL OLT LENGT REQUIRED. UPPLIED WEN ORDERED A KIT. 4 AVAILALE FOR TAUFF GROUP 3 TO 10 ONLY (DIN GROUP 1 TO 8). 5 NOMINAL ORE, EXCEPT DIN EN NOMINAL ORE, ONLY DIN EN INDIVIDUAL COMINATION OF ALTERNATIVE URFACE AND PECIAL PROPERTY MATERIAL ARE AVAILALE UPON REQUET

20 PIPE CLAMP - EAVY ERIE ORDER CODE - COMPLETE CLAMP according to DIN 3015, Part 2 PAL 3006 PP DPAL-A M W12 PA 3006 PP DPA-A M W12 2x exagon ead olt urface: W1, untreated 1x Cover Plate for ingle Clamps urface: W2, phosphated 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 3 / DIN 1 Pipe-O.D. 6 mm 1x Weld Plate for ingle Clamps urface: W2, phosphated 4x exagon ead olt urface: W1, untreated 1x Cover Plate for Double Clamps urface: W2, phosphated 2x Clamp (four halves) Design: profiled inside, with tension Group: TAUFF 3 / DIN 1 Pipe-O.D. 6 mm 1x Weld Plate for Double Clamps urface: W2, phosphated W12 (up to Group 7) or W1 (Group 8 to 12) are standards for this type of installation. W12 (up to Group 7) or W1 (Group 8 to 12) are standards for this type of installation. PAL/DUE 3006 PP DPAL-A M W12 PAL 3006 PP I M W12 2x exagon ead olt urface: W1, untreated 1x Cover Plate for ingle Clamps urface: W2, phosphated 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 3 / DIN 1 Pipe-O.D. 6 mm 1x Elongated Weld Plate for ingle Clamps urface: W2, phosphated 2x ocket Cap crew urface: W1, untreated 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 3 / DIN 1 Pipe-O.D. 6 mm 1x Weld Plate for ingle Clamps urface: W2, phosphated W12 (up to Group 7) or W1 (Group 8 to 12) are standards for this type of installation. W12 (up to Group 6) is standard for this type of installation. 20

21 PIPE CLAMP - EAVY ERIE ORDER CODE - COMPLETE CLAMP according to DIN 3015, Part PP IP-AF M W2 GMV 3006 PP DPAL-A M W13 2x tacking olt urface: W2, phosphated 1x afety Locking plate urface: W2, phosphated 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 3 / DIN 1 Pipe-O.D. 6 mm 2x exagon ead olt urface: W1, untreated 1x Cover Plate for ingle Clamps urface: W2, phosphated 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 3 / DIN 1 Pipe-O.D. 6 mm 2x Mounting Rail Nut urface: W3, zinc/nickel coated W2 (up to Group 7) or W18 (Group 8 to 10) are standards for this type of installation. W13 (up to Group 6) is standard for this type of installation. This combination is available up to Group 6 only. PAL 3006 PP DPAL-A M W12 2x exagon ead olt urface: W1, untreated 1x Cover Plate for ingle Clamps urface: W2, phosphated 1x Clamp (two halves) Design: smooth inside, without tension Group: TAUFF 3 / DIN 1 Pipe-O.D. 6 mm NOTE REGARDING TE UE OF TE CANNEL RAIL ADAPTOR CRA The CANNEL RAIL ADAPTOR Type CRA is suitable for the following channel rails: UNITRUT-Rails P1000, P1000T, P1000V, P1000VT, P1001 P2000, P2000T P3003, P3003T, P3300V, P3300VT, P3301 P4000, P4000T P5000, P5000T, P5001, P5500, P5500T, P5501 ALFEN-Rails M 41/41 ZA 41/22 ZM 41/41 ZM 41/22 L 41/41, L 41/2 1x Weld Plate for ingle Clamps urface: W2, phosphated W12 (up to Group 7) or W1 (Group 8 to 12) are standards for this type of installation. 21

22 PIPE CLAMP - TWIN ERIE ORDER CODE - COMPONENT according to DIN 3015, Part 3 ALO AVAILALE Extensive range of special clamping systems and accessories, e.g. for noise and vibration reducing installation, for electric applications and cables or for particular mounting purposes CLAMP ODY consisting of two clamp halves INGLE WELD PLATE P GROUP WELD PLATE RAP CANNEL RAIL ADAPTOR CRA suitable for several types of channel rails, see page 27 see pages 28 to 32 Custom designed pipe clamps (machined and injection moulding versions) according to customer`s specifications or based on TAUFF developments see pages 34 to 35 MATERIAL & URFACE CODE (ALL DIPLAYED OPTION ARE TANDARD DELIVERY) EE COMPONENT PART IDENTIFICATION W2 W1 W3 ORDERING INFORMATION, /, P RAP / / CRA TAUFF GROUP DIN GROUP OUTIDE DIAMETER PIPE / TUE / OE IN MM OUTIDE DIAMETER PIPE / TUE / OE IN INC NOMINAL ORE PIPE IN INC TAUFF GROUP OUTIDE DIAMETER OF OT PIPE IN MM MATERIAL & DEIGN OF CLAMP ODY INGLE WELD PLATE P TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE GROUP WELD PLATE RAP TAUFF GROUP PIPE CENTER PACING NUMER OF CLAMP TYPE OF TREAD MATERIAL & URFACE CANNEL RAIL ADAPTOR CRA TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE 1D 2D 3D 4D 5D /06 6,4 1 /4 106,4/06,4 8 5 /16 108/08 9,5 3 /8 109,5/09, /8 110/ /12 12,7 1 /2 212,7/12,7 13,5 1 /4 213,5/13, / / /8 216/16 17,2 3 /8 217,2/17, / /4 319/ /20 21,3 1 /2 321,3/21, /8 322/ /25 25, ,4/25,4 26,9 3 /4 426,9/26, / / /32 33,7 533,7/33, / / / /42 P 1D P 2D P 3D P 4D P 5D RAP 1D/40/5 RAP 2D/58/5 RAP 3D/72/5 RAP 4D/90/5 CRA 1D M for use with bolt M6 x 35 CRA 2D M for use with bolt M8 x 35 CRA 3D M for use with bolt M8 x 45 CRA 4D M for use with bolt M8 x 50 RAP 5D/112/5 CRA 5D M for use with bolt M8 x 60 COMPONENT PART IDENTIFICATION FOR TWIN ERIE CLAMP ODIE AND COMPONENT CLAMP ODY MATERIAL DEIGN COLOUR CODE Polypropylene profiled inside, green with tension Polypropylene smooth inside, green without tension PP PP MATERIAL DEIGN COLOUR CODE Polyamide profiled inside, black with tension Polyamide smooth inside, black without tension Alternative materials, designs and colours in addition to the above stated standard are available upon request. PA PA 22

23 PIPE CLAMP - TWIN ERIE ORDER CODE - COMPONENT according to DIN 3015, Part 3 COVER PLATE GD EXAGON EAD OLT A TACKING OLT AF AFETY LOCKING PLATE I AFETY LOCKING PLATE IV MOUNTING RAIL T EXAGON RAIL NUT M DIN EN IO 4014 / 4017 (DIN 931/933) for multi-level assembly, prevents upper clamp from turning M 1-8/1D Group 1D - 3D M 2-5D W3 W3 W3 W3 W3 W1 W1 / W3 GD A AF I IV T - M COVER PLATE GD TAUFF GROUP MATERIAL & URFACE EXAGON EAD OLT A TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE TACKING OLT AF TAUFF GROUP TYPE OF TREAD MATERIAL & URFACE AFETY LOCKING PLATE I TAUFF GROUP (1D OR 2-5D ONLY) MATERIAL & URFACE AFETY LOCKING PLATE IV TAUFF GROUP (1D OR 2-3D ONLY) MATERIAL & URFACE MOUNTING RAIL T EIGT OF RAIL IN MM LENGT OF RAIL IN M MATERIAL & URFACE EXAGON RAIL NUT M TAUFF GROUP (1-8/1D OR 2-5D ONLY) TYPE OF TREAD MATERIAL & URFACE GD 1D A 1D M (M6 x 35) AF 1D I 1D IV 1D M 1-8/1D W1 GD 2D A 2D M (M8 x 35) AF 2D IV 2-3D T - available heigths: 11, 14 and 30 mm GD 3D A 3D M (M8 x 45) AF 3D I 2-5D available lengths: 1m and 2 m M 2-5D W3 GD 4D A 4D M (M8 x 50) AF 4D GD 5D A 5D M (M8 x 60) AF 5D COMPONENT PART IDENTIFICATION FOR TWIN ERIE CLAMP ODIE AND COMPONENT METAL PART Alternative materials and surface finishings in addition to the below stated standard are available upon request TREADED PART MATERIAL URFACE CODE carbon steel t37 untreated W1 carbon steel t37 phosphated W2 carbon steel t37 zinc/nickel coated* W3 stainless steel A / (AII 304) W4 stainless steel A / (AII 316/316Ti) W5 TYPE OF TREAD Metric Thread UNC Thread All threaded parts are available with Metric or UNC Thread on request. * Please see note on page 26. CODE M U 23

24 PIPE CLAMP - TWIN ERIE DIMENION - COMPONENT according to DIN 3015, Part 3 MATERIAL & URFACE OF METAL PART CLAMP ODY consisting of two clamp halves INGLE WELD PLATE P GROUP WELD PLATE RAP CANNEL RAIL ADAPTOR CRA carbon steel t37, untreated carbon steel t37, phosphated carbon steel t37, zinc/nickel coated* W1 W2 W3 stainless steel A / W4 (AII304) L2 L1 stainless steel A / W5 (AII316/316Ti) Alternative materials and surface finishings in addition to the above stated standard are available upon request. Please see note on page 26. ø D 1 L 1 L 2 ø D 2 ød G L ø D G L2 L3 L G 1 2 MATERIAL & URFACE CODE EE COMPONENT PART IDENTIFICATION W2 W1 W3 TAUFF GROUP DIN GROUP OUTIDE DIAMETER PIPE / TUE / OE Ø D1 / Ø D2 IN MM Inside urface profiled smooth L1 L2 Width L ød G L1 L2 L3 ød G G L 1 2 1D 2D 3D 4D 5D ,4 8 9, ,7 13, , , ,4 26, , ,6 26, ,7 26, ,7 36, , , ,5 12 M M M M M ,5 12 M M M M M8 M ,5 M ,5 27,5 M ,5 27,5 24

25 PIPE CLAMP - TWIN ERIE DIMENION - COMPONENT according to DIN 3015, Part 3 COVER PLATE GD EXAGON EAD OLT A TACKING OLT AF AFETY LOCKING PLATE I AFETY LOCKING PLATE IV MOUNTING RAIL T EXAGON RAIL NUT M DIN EN IO 4014 / 4017 (DIN 931/933) for multi-level assembly, prevents upper clamp from turning G ø D 1 2 ø D 11 T L 2 M 1-8/1D 14 G W T 14 L L L 3 L 2 L L ØD L G G L 1 T 30 G Group 1D - 3D M 2-5D W3 W3 W3 W3 W3 W1 W1/W3 L ød G x L G L1 L2 L3 W L 1 2 L 1 2 Nominal ize 1 2 L 1 2 ød G M6 x 35 M ,2 0, , ,5 10,2 13, M8 x 35 M ,2 0, ,1 1 7 T M8 x 45 M ,2 0, ,1 1 7 T 14 T ,5 10, ,5 12 M6 M M8 x 50 M ,2 0, M8 x 60 M ,2 0,5 25

26 PIPE CLAMP - TWIN ERIE ORDER CODE - COMPLETE CLAMP according to DIN 3015, Part 3 ➀ ➁, /, ➂ ➃ - ➄ ➅ W ➆ ➀ TYPE OF INTALLATION ➂ MATERIAL & DEIGN OF CLAMP ODY * 1 ➃ MOUNTING & FITTING COMINATION ➆ AEMLING & PACKAGING no code P RAP CRA M without mounting plate, rail adaptor or rail nuts ingle Weld Plate Group Weld Plate Channel Rail Adaptor exagon Rail Nut PP PP PA PA Polypropylene, profiled inside, with tension Polypropylene, smooth inside, without tension Polyamide, profiled inside, with tension Polyamide, smooth inside, without tension GD - A Cover Plate / exagon ead olt I - AF afety Locking Plate / tacking olt no code A K components supplied separately (standard) assembled (optional) packed in kits (optional) ➁ Group TAUFF 1D DIN 1 TAUFF 2D DIN 2 TAUFF 3D DIN 3 4D 4 TAUFF 5D DIN 5 TAUFF GROUP & IZE OF CLAMP ODY Tube O.D. in mm Tube O.D. in inch * 3 Nominal ore Pipe Material Code Clamp ody (both halves) 6 106/06 6,4 1 /4 106,4/06,4 8 5 /16 108/08 9,5 3 /8 109,5/09, /8 110/ /12 12,7 1 /2 212,7/12,7 13,5 1 /4 213,5/13, / / /8 216/16 17,2 3 /8 217,2/17, / /4 319/ /20 21,3 1 /2 321,3/21, /8 322/ /25 25, ,4/25,4 26,9 3 /4 426,9/26, / / /32 33,7 533,7/33, / / / /42 ➄ M U TYPE OF TREAD Metric Thread UNC Thread ➅ W1 W2 W3 W4 W5 W10 W11 MATERIAL & URFACE OF METAL PART * 2 all parts are untreated all parts are phosphated all parts are zinc/nickel coated* all metal parts made of stainless steel A / (AII 304) all metal parts made of stainless steel A / (AII 316/316Ti) weld plate phosphated, all other parts zinc/nickel coated* rail nut untreated, all other parts zinc/nickel coated* TECNICAL NOTE * NOTE: TE CANGEOVER OF TE MATERIAL CODE W3 FROM TE URFACE»CARON TEEL T 37, ZINC PLATED«TO TE CROMIUM(VI) FREE URFACE»CARON TEEL T 37, ZINC/NICKEL COATED«WILL PROCEED GRADUALLY FROM APRIL 2007 ON. WE APOLOGIE FOR TE TEMPORARY OCCURRENCE OF OME MIXED DELIVERIE. 1 EE MATERIAL PROPERTIE ON PAGE 52. OTER CLAMP ODY MATERIAL * AND COLOUR ARE AVAILALE UPON REQUET. 2 INDIVIDUAL COMINATION OF ALTERNATIVE URFACE AND * PECIAL PROPERTY MATERIAL ARE AVAILALE UPON REQUET. 3 TWIN CLAMP WIT DIFFERENT OUTIDE DIAMETER ARE ALO AVAILALE * ON REQUET. 26

27 PIPE CLAMP - TWIN ERIE ORDER CODE - COMPLETE CLAMP according to DIN 3015, Part 3 P 106/06 PP GD-A M W10 1x exagon ead olt urface: W3, zinc/nickel coated 1x Cover Plate urface: W3, zinc/nickel coated 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 1D / DIN 1 Pipe-O.D. both 6 mm 106/06 PP GD-A M W3 1x exagon ead olt urface: W3, zinc/nickel coated 1x Cover Plate urface: W3, zinc/nickel coated 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 1D / DIN 1 Pipe-O.D. both 6 mm 1x Weld Plate urface: W2, phosphated W10 is standard for this type of installation. W3 is standard for this type of installation. M 106/06 PP GD-A M W11 1x exagon ead olt urface: W3, zinc/nickel coated 1x Cover Plate urface: W3, zinc/nickel coated 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 1D / DIN 1 Pipe-O.D. both 6 mm 106/06 PP I-AF M W3 1x afety Locking Plate urface: W3, zinc/nickel coated 1x tacking olt urface: W3, zinc/nickel coated 1x Clamp (two halves) Design: profiled inside, with tension Group: TAUFF 1D / DIN 1 Pipe-O.D. both 6 mm 1x Mounting Rail Nut urface: W1, untreated W11 (Group 1D) or W3 (Group 2D-5D) are standards for this type of installation. W3 is standard for this type of installation. P 106/06 PP GD-A M W10 1x exagon ead olt urface: W3, zinc/nickel coated 1x Cover Plate urface: W3, zinc/nickel coated 1x Clamp (two halves) Design: smooth inside, without tension Group: TAUFF 1D / DIN 1 Pipe-O.D. both 6 mm 1x Weld Plate urface: W2, phosphated NOTE REGARDING TE UE OF TE CANNEL RAIL ADAPTOR CRA The CANNEL RAIL ADAPTOR Type CRA is suitable for the following channel rails: UNITRUT-Rails P1000, P1000T, P1000V, P1000VT, P1001 P2000, P2000T P3003, P3003T, P3300V, P3300VT, P3301 P4000, P4000T P5000, P5000T, P5001, P5500, P5500T, P5501 ALFEN-Rails M 41/41 ZA 41/22 ZM 41/41 ZM 41/22 L 41/41, L 41/2 W10 is standard for this type of installation. 27

28 PIPE CLAMP PECIAL CLAMP / ACCEORIE RI-CLAMP (Pipe Clamps with Rubber Insert) TANDARD ERIE EAVY ERIE Clamp ody Rubber Insert Clamp ody Rubber Insert ød ød1 ød ød1 Pipe-O.D. Order Code TAUFF DIN Group Group ØD ØD1 Rubber Clamp Rubber Insert + [mm] [mm] Insert ody Clamp ody 6 RI 06 (4+4) 4 xxr 406 xxr 8 RI 08 (4+4) 4 xxr 408 xxr 10 RI 10 (4+4) 4 xxr 410 xxr 12 RI 12 (4+4) 4 xxr 412 xxr 12,7 RI 12,7 (4+4) 4 xxr 412,7 xxr RI 14 (4+4) 4 xxr 414 xxr,0 15 RI 15 (4+4) 4 xxr 415 xxr 16 RI 16 (4+4) 4 xxr 416 xxr 17,2 RI 17,2 (4+4) 4 xxr 417,2 xxr 18 RI 18 (4+4) 4 xxr 418 xxr 19 RI 19 (4+4) 4 xxr 419 xxr 20 RI 20 (6+5) 6 xxr 620 xxr 21,3 RI 21,3 (6+5) 6 xxr 621,3 xxr 22 RI 22 (6+5) 6 xxr 622 xxr RI 25 (6+5) 6 xxr 625 xxr 38,0 26,9 RI 26,9 (6+5) 6 xxr 626,9 xxr 28 RI 28 (6+5) 6 xxr 628 xxr 30 RI 30 (6+5) 6 xxr 630 xxr 32 RI 32 (6+5) 6 xxr 632 xxr Other diameters are availabe on request. Clamp ody Elastomer Insert Elastomer Insert Material XX Polypropylene PP Polyamide PA Material Thermoplastic Elastomer (TPE) Material Properties Mechanical Properties hore ardness: 73 A Modulus of Elasticity: 16 N/mm2 at 23 C (acc. to ATM D 412) Tensile tress: 8,3 N/mm2 (acc. to ATM D 412) Pipe-O.D. Order Code TAUFF DIN Group Group ØD ØD1 Rubber Clamp Rubber Insert + [mm] [mm] Insert ody Clamp ody 06 RI 06 (4+4) 4 xxr 4006 xxr 08 RI 08 (4+4) 4 xxr 4008 xxr 10 R 10 (4+4) 4 xxr 4010 xxr 12 RI 12 (4+4) 4 xxr 4012 xxr 12,7 RI 12,7 (4+4) 4 xxr 4012,7 xxr RI 14 (4+4) 4 xxr 4014 xxr 15 RI 15 (4+4) 4 xxr 4015 xxr 16 RI 16 (4+4) 4 xxr 4016 xxr 17,2 RI 17,2 (4+4) 4 xxr 4017,2 xxr 18 RI 18 (4+4) 4 xxr 4018 xxr 19 RI 19 (4+4) 4 xxr 4019 xxr 20 RI 20 (6+5) 5 xxr 5020 xxr 21,3 RI 21,3 (6+5) 5 xxr 5021,3 xxr 22 RI 22 (6+5) 5 xxr 5022 xxr RI 25 (6+5) 5 xxr 5025 xxr 38 26,9 RI 26,9 (6+5) 5 xxr 5026,9 xxr 28 RI 28 (6+5) 5 xxr 5028 xxr 30 RI 30 (6+5) 5 xxr 5030 xxr 32 RI 32 (6+5) 5 xxr 5032 xxr 32 RI 32 (6) 6 xxr 6032 xxr 33,7 RI 33,7 (6) 6 xxr 6033,7 xxr 35 RI 35 (6) 6 xxr 6035 xxr 38,7 RI 38,7 (6) 6 xxr 6038,7 xxr 40 RI 40 (6) 6 xxr 6040 xxr RI 42 (6) 6 xxr 6042 xxr 45,5 RI 45,5 (6) 6 xxr 6045,5 xxr 48 RI 48 (6) 6 xxr 6048 xxr 51 RI 51 (6) 6 xxr 6051 xxr 53,4 RI 53,4 (6) 6 xxr 6053,4 xxr 56,4 RI 56,4 (6) 6 xxr 6056,4 xxr 55 RI 55 (7) 7 xxr 7055 xxr 57 RI 57 (7) 7 xxr 7057 xxr 60 RI 60 (7) 7 xxr 7060 xxr RI 65 (7) 7 xxr 7065 xxr 70 RI 70 (7) 7 xxr 7070 xxr 72 RI 72 (7) 7 xxr 7072 xxr 76 RI 76 (7) 7 xxr 7076 xxr RI 80 (8) 8 xxr 8080 xxr ,9 RI 88,9 (8) 8 xxr 8088,9 xxr Other diameters are availabe on request. Temperature Properties Temperature Resistance: -40 C C Chemical Properties weak acids, solvents consistent benzine, mineral oils conditionally consistent alcohol, other oils, seawater consistent Attention! The relation between tube O.D. and RI-clamp size does not match with that of standard series (profiled and smooth bore). For dimensions of clamp bodies please refer to the dimensional tables of the standard series, respectively heavy series. 28

29 PIPE CLAMP EAVY ERIE - TWIN DEIGN MATERIAL & DEIGN OF CLAMP ODY Polypropylene, profiled inside, with tension Polyamide, profiled inside, with tension MATERIAL & URFACE OF METAL PART carbon steel t37, untreated carbon steel t37, phosphated carbon steel t37, zinc/nickel coated stainless steel A / (AII304) stainless steel A / (AII316/316Ti) TYPE OF TREAD Metric Thread UNC Thread MATERIAL & URFACE (TANDARD DELIVERY / DETAIL AOVE ) PP PA W1 W2 W3 W4 W5 M U CLAMP ODY consisting of two clamp halves EE COMPONENT PART IDENTIFICATION PECIAL CLAMP / ACCEORIE WELD PLATE PAD ORDER CODE / DIMENION COVER PLATE DPAD EXAGON EAD OLT A DIN EN IO 4014 / 4017 (DIN 931/933) W1 W1 W1 ORDERING INFORMATION, /, PAD DPAD A TAUFF GROUP OUTIDE DIAMETER PIPE / TUE / OE Ø D1/D2 IN MM OUTIDE DIAMETER PIPE / TUE / OE Ø D1/D2 IN INC NOMINAL ORE PIPE IN INC FIRT DIGIT OF TAUFF GROUP (EE ELOW) OUTIDE DIAMETER OF PIPE IN MM MATERIAL & DEIGN OF CLAMP ODY WELD PLATE PAD FIRT 2 DIGIT OF TAUFF GROUP (EE ELOW) TYPE OF TREAD MATERIAL & URFACE COVER PLATE DPAD FIRT 2 DIGIT OF TAUFF GROUP (EE ELOW) MATERIAL & URFACE EXAGON EAD OLT A FIRT 2 DIGIT OF TAUFF GROUP (EE ELOW) TYPE OF TREAD MATERIAL & URFACE 19/19 3 /4 / 3 /4 4019/19 20/ /20 4-D 21,3/21,3 22/22 7 /8 / 7 /8 1 /2 / 1 /2 4021,3/21,3 4022/22 PAD 4 DPAD 4 A 4 M (M10 x 60) 25,4/25,4 1 / ,4/25,4 26,9/26,9 3 /4 / 3 /4 4026,9/26,9 32/ /4 / 1 1 /4 5032/32 33,7/33,7 1 / ,7/33,7 5-D 38/38 40/ /2 / 1 1 /2 5038/ /40 PAD 5 DPAD 5 A 5 M (M10 x 70) 42/ /4 / 1 1 /4 5042/42 TAUFF GROUP 4-D 5-D OUTIDE DIAMETER PIPE / TUE / OE Ø D1/D2 IN MM 19/19 20/20 21,3/21,3 22/22 25,4/25,4 26,9/26,9 32/32 33,7/33,7 38/38 40/40 42/42 OUTIDE DIAMETER PIPE / TUE / OE Ø D1/D2 IN INC 3 /4 / 3 /4 7 /8 / 7 /8 1 / /4 / 1 1 /4 1 1 /2 / 1 1 /2 NOMINAL ORE PIPE IN INC 1 /2 / 1 /2 3 /4 / 3 /4 1 / /4 / 1 1 /4 L1 L2 L3 1 2 Width L1 L2 Ø D L1 L2 Ø D G x L , M10 x , M10 x 70 29

30 Multi Group Weld Plate RAP-MGR for tandard eries Clamps, Groups 2 and 5 example of mounting Clamp ody Group 2 5 ØD in mm Group ,7 212,7 13,5 213, ,2 217, MGR 21,3 521,3 - MGR MGR MGR MGR 26,9 526,9 - MGR MGR MGR MGR 33,7 533,7 - MGR MGR MGR MGR MGR = Clamp ody Material: PP Polypropylene PA Polyamide Other diameters / materials / designs upon request. Multi Group Weld Plate s ØD only for Group 5 (L3) (L3) L2 L1 Group L1 L2 L All dimensions in mm. s 0,4 0,8 Ordering Example: 6,5 Ø L3 L3 L3 L3 L3 M6 RAP-MGR 25 / 312 M W1 L4 Group 2 and 5 Multi Group Weld Plate Metric Thread Length of Weld Plate Material Code (t37, untreated) All dimensions in mm. RAP-MGR 25/156 RAP-MGR 25/234 RAP-MGR 25/312 RAP-MGR 25/390 RAP-MGR 25/520 RAP-MGR 25/700 Number of Weld Nuts L3 L

31 PIPE CLAMP PECIAL CLAMP / ACCEORIE Also available... Group 3-9 Group ANGLED WELD PLATE TYPE WP ELONGATED WELD PLATE FOR DOULE CLAMP TYPE PA/DUE RIDGE WELD PLATE TYPE P AFETY WAER TYPE I-6,4 DIN 463 W3 AGRICULTURAL CLAMP TYPE AG I-CLEAN ERIE CLAMP ODIE AND PECIAL MOUNTING ACCEORIE ADJUTMENT CLAMP CONULT TAUFF FOR FURTER DETAIL. 31

32 40(36) PIPE CLAMP PECIAL CLAMP / ACCEORIE Pipe Clamps For Industrial Electric Applications And Electric Cables ORDER CODE ORDER CODE ORDER CODE 430 PP (clamp body only) (or other tandard-eries clamps with the corresponding diameter) Accessories see tandard eries PP-VK (clamp body only) PP-VK (clamp body only) Accessories see tandard eries PP (tandard-eries) PP (eavy-eries) Accessories see tandard eries and eavy eries 40(40) For proximity switches according to DIN EN or similar Proximity switch round construction, 30 mm diameter fastened with a Group 4 tandard-eries clamp mounted on mounting rail with hexagon rail nuts. Loosening of the bolts provides axial and horizontal position adjustment. For proximity switches according to DIN EN or similar Proximity switch rectangular construction, 40 mm square fastened with Group 5 tandard-eries clamp mounted on mounting rail with hexagon rail nuts. Loosening of the bolts provides axial and horizontal position adjustment. For clamping of electric cables: TAUFF-Oval Clamps Group 6 tandard-eries for cable diameters between 20 and 50 mm. Group 6 eavy-eries for cable diameters between 40 and 72 mm. olt types: tandard-eries: exagon ead olt in conjunction with cover plate. ocket Cap crew with washer. lotted ead crew with washer. eavy eries: exagon ead olt in conjunction with cover plate. For varying cable diameters only the bolt length needs to be varied. 32

33 PIPE CLAMP PECIAL CLAMP / ACCEORIE addle Clamps For Cylinder upply Lines (Order Code ZR 518) Material hore ardness: Colour: Thermoplastic Elastomer (TPE) 75±5 A Order Code: ZR 518 lack (tandard) Outer Diameter of Pipes in mm teel trap Dimensions in mm ØD1 ØD2 Length Width teel trap is not included in scope of delivery. addle Clamps for Cylinder upply Lines (Custom Designs) Custom-designed saddle clamps according to customer`s specifications or based on TAUFF developments are available on request. 33

34 CUTOM-DEIGNED PIPE CLAMP Custom-designed pipe clamps / hose clamps in addition to the Original-TAUFF-Clamp range according to customer`s specifications or based on TAUFF developments. MACINED VERION Dimensions and designs acc. to customer s specifications. Materials: plastics, metals, non-ferrous metals MACINED VERION Accessories such as weld plates, cover plates, bolts as well as rubber inserts are available on request. 34

35 CUTOM-DEIGNED PIPE CLAMP INJECTION MOULDING VERION Custom-designed pipe, clamps / hose clamps in addition to the Original-TAUFF-Clamp range according to customer`s specifications or based on TAUFF developments. INJECTION MOULDING VERION Max. dimensions: Length 650 mm eight 80 mm Width 70 mm Materials: Polypropylene, Polyamide Other thermoplastics on request. Accessories such as weld plates, cover plates, bolts as well as rubber inserts are available on request. 35

36 PIPE CLAMP - LIGT ERIE Applications: Type L Pneumatics, Instrumentation and Automotive Technology, Machine Tool Industry, Lubrication, Mechanical Engineering Type L ø D 2 ø D 3 ø D 1 L2 L3 L1 L1 TAUFF Group Outside diameter Nominal bore Clamp Tube or ose Ø D1 Pipe L1 L2 L3 ød2 ød3 Material Colour mm inch inch XX 03,2 1 / PP black , ,5 2 6,8 7 06,4 1 /4 PA yellow 08 09,5 3 / / ,8 7 PP black 11,1 PA yellow 12 12,7 1 /2 13,5 1 / ,5 2 6, /8 PP PA black yellow 17,2 3 / / ,3 1 / ,8 7 PP black 22 PA yellow 25 25,4 1 ORDER CODE L *** xx PP Polypropylene PA Polyamide Pipe-O.D. Ø D1 (mm) TAUFF Group Other thermoplastics and diameters on request. 36

37 PIPE CLAMP - LIGT ERIE Applications: Type LG Pneumatics, Instrumentation and Automotive Technology, Machine Tool Industry, Lubrication, Mechanical Engineering Type LU Type LG LU (identical diameters) (different diameters) ø D 3 ø D 4 ø D 1 ø D 2 L2 L1 L1 TAUFF Group Outside diameter Nominal bore Clamp Tube or ose Ø D1/D2 Pipe L1 L2 ød3 ød4 Material Colour mm inch inch XX 03,2/03,2 1 /8 / 1 /8 1 06/06 PP black ,5 2 6,8 7 06,4/06,4 1 /4 / 1 /4 PA yellow 08/08 09,5/09,5 3 /8 / 3 /8 2 10/10 1 /8 / 1 / ,5 2 6,8 7 PP black 11,1/11,1 PA yellow 12/12 12,7/12,7 1 /2 / 1 /2 13,5/13,5 1 /4 / 1 /4 14/ / ,5 2 6,8 7 16/16 5 /8 / 5 /8 17,2/17,2 3 /8 / 3 /8 18/18 PP PA black yellow 19/19 3 /4 / 3 /4 20/ ,3/21,3 1 /2 / 1 / ,8 7 PP black 22/22 PA yellow 25/25 25,4/25,4 1 / 1 ORDER CODE Lx *** / ** xx PP Polypropylene PA Polyamide Pipe-O.D. Ø D2 (mm) Pipe-O.D. Ø D1 (mm) TAUFF Group LG identical diameters LU different diameters Type LG Double pipe clamp for two identical diameters LU Double pipe clamp for two different diameters Other thermoplastics and diameters on request. 37

38 PIPE CLAMP - LIGT ERIE Applications: Pneumatics, Instrumentation and Automotive Technology, Machine Tool Industry, Lubrication, Mechanical Engineering. Also suitable for cables and hoses. Type LN Type LN ø D 2 ø D 1 L3 L2 L1 TAUFF Group Outside diameter Nominal bore Clamp Tube or ose Ø D1 Pipe L1 L2 L3 ød2 Material Colour mm inch inch XX ,4 1 / ,5 13,5 6, ,5 3 / / ,5 18,5 6, ,7 1 /2 PP PA PP PA green black green black 10 1 / ,7 1 /2 3 13,5 1 / ,5 23,5 6, PP PA green black 16 5 / /8 17,2 3 / ,5 30,5 6, / ,3 1 /2 22 PP PA green black ORDER CODE LN *** xx PP Polypropylene PA Polyamide Pipe-O.D. Ø D1 (mm) TAUFF Group Other thermoplastics and diameters on request. 38

39 PIPE CLAMP - LIGT ERIE Applications: Type LNGF (identical diameters) Pneumatics, Instrumentation and Automotive Technology, Machine Tool Industry, Lubrication, Mechanical Engineering. Also suitable for cables and hoses. Type LNUF (different diameters) Type LNGF LNUF DPL ø D 3 ø D 2 L4 2 ø D 1 L2 L1 ø D 4 Outside diameter Nominal bore Clamp TAUFF Cover Group Tube or ose Ø D1/ D2 Pipe L1 L2 ød3 L4 2 ød4 Material Colour Plate mm inch inch XX 06/ ,4/06,4 1 /4 / 1 / ,5 13,5 6,8 29,5,5 15,5 6,8 08/08 PP PA green black DPL1 08/08 09,5/09,5 3 /8 / 3 /8 2 10/10 1 /8 / 1 / ,5 18,5 6,8 40,5 15,5 6,8 12/12 PP PA green black DPL2 12,7/12,7 1 /2 / 1 /2 10/10 1 /8 / 1 /8 12/12 12,7/12,7 1 /2 / 1 /2 3 13,5/13,5 1 /4 / 1 / ,5 23,5 6, ,5 6,8 14/14 15/15 PP PA green black DPL3 16/16 5 /8 / 5 /8 14/14 15/15 16/16 5 /8 / 5 /8 17,2/17,2 3 /8 / 3 /8 4 18/ ,5 30,5 6,8 63,5 16,5 6,8 19/19 3 /4 / 3 /4 20/20 PP PA green black DPL4 21,3/21,3 1 /2 / 1 /2 22/22 ORDER CODE LNxF *** / ** xx PP Polypropylene PA Polyamide Pipe-O.D. Ø D2 (mm) Pipe-O.D. Ø D1 (mm) TAUFF Group LNGF identical diameters LNUF different diameters Type LNGF Double pipe clamp for two identical diameters LNUF Double pipe clamp for two different diameters (on request only) Accessories Cover Plate DPL teel, zinc/nickel coated Information Other thermoplastics and diameters on request. Max. tightening torque: 2,5 Nm 39

40 PIPE CLAMP - CONTRUCTION ERIE Type K DK Two-part-weld-construction with plastic pads K DK KV (for anchor bolt fastening) DKV (for anchor bolt fastening) L ø D1 4 2 ø D1 3 1 L2 1 3 L1 2 ø D 2 L2 1 3 L4 2 L3 Pipe-O.D. Ø D1 in mm L1 L2 L3 L D2 exagon ead olt Number of plastic pads 220 to M30 x to M30 x to M30 x to M30 x to M30 x to M30 x to M30 x to M30 x to M30 x ORDER CODE Kx **** xx xx Plastic pads Polypropylene PP Plastic pads Polyamide Material and surface finishing PA carbon steel t 37, prime painted W7 carbon steel t37, hot-dip zinc galvanised W40 Pipe-O.D. Ø D1 (please indicate exact Ø D1) Type Normal design no further information required Anchor bolt design V DKx **** xx xx Plastic pads Polypropylene PP Plastic pads Polyamide Material and surface finishing PA carbon steel t 37, prime painted W7 carbon steel t37, hot-dip zinc galvanised W40 Pipe-O.D. Ø D1 (please indicate exact Ø D1) Type Normal design no further information required Anchor bolt design V Other materials, surface finishings and diameters on request. 40

41 FLAT TEEL U-OLT CLAMP Type F RUK with plastic pipe saddle Type RUK and U-profile (to be used as fixed point clamps only!) 1 1 ø D1 RUK DN 40 dimension L4 is 90 staggered L2 L L4 L3 3 D2 Pipe-O.D. Ø D1 Flat teel U-olt Clamp F U-profile Plastic Pipe addle RUK Accessories DN Nominal 1 exagon mm ore L1 L Flat 2 x 4 L3 L4 3 D ead inch teel olts 40 48,3 1 1 / , x 3 DIN M10 x 40 60, ,2 50 x ,1 2 1 / , , , x M12 x , , , , DIN , x 6 80 x 45 M16 x , , , , , , ORDER CODE F + RUK complete F + RUK/xx ***, * W1 Pipe-O.D. Ø D1 (mm) PP Polypropylene PA Polyamide 40 x 8 M20 x , DIN , x x M24 x , Plastic Pipe addle RUK ***, * xx PP Polypropylene PA Polyamide Pipe-O.D. ØD1 (mm) Clamp consisting of: (for F + RUK only) 1 x Flat steel U-bolt clamp 1 x RUK/xx 1 x U-profile c/w nuts 2 x exagon head bolts DIN EN IO 4014/4017 Material Metal parts: W1: carbon steel t 37, untreated Information Other materials and surface finishings on request. Items are supplied non-assembled. 41

42 ROUND TEEL U-OLT CLAMP Type R RUK with plastic pipe saddle - short - RUK RUK DN 20 DN 40: 1 A ø D 1 4 from DN 50 on: up to DN 25 without counternut DN G L1 Pipe-O.D. Ø D1 Round teel U-olt R Plastic Pipe addle RUK Nominal ore mm A L G L2 L D2 inch , , ,9 0 3 /4 18, , M ,4 1 1 /4 26, ,5 27, ,3 1 1 / , , ,2 M ,1 2 1 / , , , , , M , , , , , , M , , , , ,5 M L3 L2 7 D2 ORDER CODE R + RUK complete Rxx RUK/xx ***, * Pipe-O.D. ØD1 (mm) PP Polypropylene PA Polyamide Material and surface finishing carbon steel t 37, untreated W1 carbon steel t 37, zinc plated (Fe/Zn 8 C) W3 stainless steel A / W5 (AII 316/316Ti) carbon steel t 37, plastic coated W6 Round teel U-olt Rxx A *** kompl Dimension A Material and surface finishing carbon steel t 37, untreated carbon steel t 37, zinc plated (Fe/Zn 8 C) stainless steel A / (AII 316/316Ti) carbon steel t 37, plastic coated Plastic Pipe addle RUK ***, * xx PP Polypropylene PA Polyamide Pipe-O.D. ØD1 (mm) W1 W3 W5 W6 Clamp consisting of: 1 x Round teel U-olt, 4 x Nuts DIN EN IO 4032, 1 x Plastic Pipe addle RUK/xx Clamp consisting of: 1 x Round teel U-olt 4 x Nuts DIN EN IO 4032 Information Items are supplied non-assembled. Other materials and surface finishings on request. 42

43 ROUND TEEL U-OLT CLAMP Type R RUL with plastic pipe saddle - long - RUL up to DN 50 without counternut 1 ø D 1 A ø D 4 G L1 3 5 L3 L2 Pipe-O.D. Ø D1 Round teel U-olt R Plastic Pipe addle RUL DN Nominal ore mm inch A L G L2 L3 5 6 ød , , ,9 3 /4 18, , M ,4 1 1 /4 26, ,5 27, ,3 1 1 / , ,3 2 35,2 39 M ,1 2 1 / , , , , , M , , , , , , ,5 M , , , ,5 M ORDER CODE R + RUL complete Rxx RUL/xx ***, * Pipe-O.D. ØD1 (mm) PP Polypropylene PA Polyamide Material and surface finishing carbon steel t 37, untreated W1 carbon steel t 37, zinc plated (Fe/Zn 8 C) W3 stainless steel A / W5 (AII 316/316Ti) carbon steel t 37, plastic coated W6 Round teel U-olt Rxx A *** kompl Dimension A Material and surface finishing carbon steel t 37, untreated carbon steel t 37, zinc plated (Fe/Zn 8 C) stainless steel A / (AII 316/316Ti) carbon steel t 37, plastic coated Plastic Pipe addle RUL ***, * xx PP Polypropylene PA Polyamide Pipe-O.D. ØD1 (mm) W1 W3 W5 W6 Clamp consisting of: 1 x Round teel U-olt, 4 x Nuts DIN EN IO 4032, 1 x Plastic Pipe addle RUL/xx Clamp consisting of: 1 x Round teel U-olt 4 x Nuts DIN EN IO 4032 Information Items are supplied non-assembled. Other materials and surface finishings on request. 43

44 ROUND TEEL U-OLT CLAMP Type RD according to DIN 3570, Type A A ø D 2 1 G L Pipe-O.D. Ø D Round teel U-olt RD DN mm Nominal ore inch A L 1 2 G ,9 3 / ,7 1 M ,4 1 1 /4 44, ,3 1 1 / ,3 2 M ,1 2 1 / , , , M , , , M , , , M ORDER CODE RDxx A *** kompl Dimension A Material and surface finishing carbon steel t 37, untreated carbon steel t 37, zinc plated (Fe/Zn 8 C) W1 W3 Clamp consisting of: 1 x Round teel U-olt 2 x Nuts DIN EN IO 4032 Information Items are supplied non-assembled. Other materials and surface finishings on request. 44

45 METAL PIPE CLAMP according to DIN 3567, Type A according to DIN 3567, Type ø D 2 ø D 2 ø D 2 L1 1 1 D D 1 L2 L1 L2 L2 L3 L2 1 2 TAUFF Nominal ize Group L1 L2 1 2 D2 1 D1 mm Pipe inch / M10 x , M / / M12 x , /2 122 M , , , ORDER CODE DIN 3567A- *** TAUFF Group D1 MATERIAL AND URFACE TAUFF Group W1 carbon steel t 37, untreated 1 clamp is consisting of 2 clamp halves Other materials, surface finishings and diameters on request. olts and nuts do not belong to the delivery standard. Accessories exagon ead olts exagon Nuts M16 x 45 M16 M20 x 50 M20 M24 x 60 M24 TAUFF Nominal ize Group L1 L2 L3 1 2 D2 1 D1 mm Pipe inch /4 66 Accessories exagon ead olts exagon Nuts M10 x , M / / M12 x , /2 122 M , , , ORDER CODE DIN *** TAUFF Group D1 MATERIAL AND URFACE TAUFF Group W1 carbon steel t 37, untreated 1 clamp is consisting of 2 clamp halves Other materials, surface finishings and diameters on request. olts and nuts do not belong to the delivery standard. M16 x 45 M16 M20 x 50 M20 M24 x 60 M24 45

46 ø D 1 ø D 1 EAVY ADDLE according to DIN 1592 according to DIN 1593 L1 ø D 2 ø D 2 L2 L2 L3 L1 TAUFF Diameter Group L1 L2 L3 D2 range ØD1 7 5,5 07, , , , , TAUFF Diameter Group range ØD1 L1 L2 D2 7 5,5 0 7, , , ,5 13, ,5 9 15, , , ,5 19, , , ,5 13, , , ,5 19, , , , , , ,5 31, , , , , , ,5 31, , , , , , , , , , ,0 18, , , , , , , , * 49 52, , , , , , , , , * similar to DIN , , , , , , ,0 18, ORDER CODE DIN *** ORDER CODE DIN *** TAUFF Group Ø D1 TAUFF Group Ø D1 MATERIAL AND URFACE TAUFF Group 7 49 W66 carbon steel t 37, zinc plated, thick film passivated TAUFF Group W1 carbon steel t 37, untreated (urface finishing on request only) Other materials, surface finishings and diameters on request. MATERIAL AND URFACE TAUFF Group 7 77 W66 carbon steel t 37, zinc plated, thick film passivated TAUFF Group W1 carbon steel t 37, untreated (urface finishing on request only) Other materials, surface finishings and diameters on request. 46

47 ø D 1 LIGT ADDLE according to DIN 1596 according to DIN 1597 L1 ø D 2 ø D 2 L2 ø D 1 L2 L3 L1 TAUFF Diameter Group range ØD1 L1 L2 L3 D2 7 5,5 07, ,5 5 6, , , ,5 13, ,5 9 15, , , , ,5 19, , , , , , ,5 64, , ,5 31,0 65, * 31 33, , , TAUFF Diameter Group range ØD1 L1 L2 D2 7 05,5 07, , 09, ,5 13, ,5 16 1,5 15, , ,5 19, , , , ,5 24 6,6 20 2, ,5 31, * 31 33, , , , , , , , , ,0 25 3, , , , , , * 49 52, , , , , * 49 52, , , ,0 30 3,0 * similar to DIN 1596 * similar to DIN 1597 ORDER CODE ORDER CODE DIN *** DIN *** TAUFF Group Ø D1 TAUFF Group Ø D1 MATERIAL AND URFACE TAUFF Group 7 61 W66 carbon steel t 37, zinc plated, thick film passivated MATERIAL AND URFACE TAUFF Group 7 61 W66 carbon steel t 37, zinc plated, thick film passivated Other materials, surface finishings and diameters on request. Other materials, surface finishings and diameters on request. 47

48 PIPE CLAMP TECNICAL APPENDIX Design of Clamp odies TANDARD ERIE EAVY ERIE TWIN ERIE tandard design profiled inside tandard design profiled inside -design smooth inside (recommended for hoses) tandard design profiled inside RI-design for rubber inserts -design smooth inside (recommended for hoses) Oval design -design smooth inside (recommended for hoses) RI-design for rubber inserts Rectangular design 48

49 PIPE CLAMP TECNICAL APPENDIX Installation Information INTALLATION ON WELD PLATE INTALLATION ON MOUNTING RAIL MULTI-LEVEL AEMLY TAUFF weld plates are available for the following eries: tandard eries eavy eries Twin eries pecial Clamps For best alignment of TAUFF clamps it is recommended to mark their location first. Weld plates, push on bottom half of clamp, install pipe, mount top half of clamp and cover plate and bolt unit together. In order to avoid damage to the clamp bodies it is recommended to mount the plastic clamp bodies after having welded the weld plates. TAUFF mounting rails can be used with the following eries: tandard eries eavy eries (Group 3 6) Twin eries pecial Clamps TAUFF mounting rails are available in four different height sizes. The rails are either welded or bolted to the supporting construction. For tandard and Twin eries insert hexagon rail nut and turn to lock. For eavy eries slide in rail nut. Push on bottom half of clamp, install pipe, mount top half of clamp and cover plate and bolt unit together. Clamp units can be adjusted before being firmly bolted. TAUFF multi-level pipe clamps permit easy stacking of several tubes or pipes of the same group. (Twin Clamps group 2 5 allow stacking of different group sizes.) The clamps are connected by stacking bolts (AF). afety plates (IG/IP/I) inserted between the clamps prevent stacking bolts from turning. TAUFF stacking assembly can be fitted to weld plates or to rails. 49

50 PIPE CLAMP TECNICAL APPENDIX tandard Materials: Properties and Technical Information CLAMP ODIE MATERIAL PP PA AL A POLYPROPYLENE Copolymeric POLYAMIDE* 1 ALUMINIUM Ali12 TERMOPLATIC ELATOMER COLOUR GREEN LACK NATURAL LACK MECANICAL PROPERTIE Tensile E-Module 1073 N/mm 2 > 1400 N/mm 2 > N/mm N/mm 2 at 23 C (IO 527) (IO 527) (ATM D 412) Notch Impact trength 7,5 kj/m 2 at 23 C > 15 kj/m 2 at 23 C (acc. to Charpy / IO 179/1eA) (acc. to Charpy / IO 179/1eA) Low Temperature 3,1 kj/m 2 at -30 C > 03 kj/m 2 at -30 C Notch Impact trength (acc. to Charpy / IO 179/1eA) (acc. to Charpy / IO 179/1eA) Tensile trength at Yield 25 N/mm 2 > 55 N/mm 2 > 150 N/mm 2 15,9 N/mm 2 (Tensile trength) (IO 527) (IO 527) (DIN EN 10002) (ATM D 412) all Indentation ardness 45,4 N/mm 2 > 65 N/mm 2 > 55 (rinell ardness) (IO ) (IO ) hore ardness 87A (IO 868) TERMAL PROPERTIE Recommended Temperature -30 C C -40 C C up to 300 C * 2-40 C C Range (Minimum / Maximum) CEMICAL PROPERTIE Weak Acids, olvents conditionally conditionally conditionally consistent consistent consistent consistent enzine, Mineral Oils conditionally conditionally consistent consistent consistent consistent Alcohol, Other Oils, eawater consistent consistent consistent consistent NOTE * 1 The stated information has been defined for conditions according to IO * 2 Tensile strengths, fatigue strength (under reversed bending stress) and impact bending toughness rise constantly at decreasing temperature level, the breaking elongation normally decreases at a decreasing temperature level. The above stated information is shown without any obligation and does not release you from own test arrangements. Tightening Torques and Maximum Loads need to be considered (see page 55). METAL PART Unless otherwise stated, all metal parts are made of carbon steel t37, surface finishing according to order code. urface Finishings In addition to the standard surface finishings stated (if zinc/nickel coated usually Fe/Zn Ni ( ) 4/A/T2 according to DIN 50962, if phosphated usually Fe/Znph r 10 according to DIN EN 12476) several alternative finishings are also available on request. tainless teel Metal Parts All metal parts are also available ex stock in two different stainless steel qualities: tainless teel A / (AII 304) tainless teel A / (AII 316/316Ti) Threads All threaded parts are available with UNC-threads on request (see thread-chart on page 54). 50

51 PIPE CLAMP TECNICAL APPENDIX pecial Materials: Properties and Technical Information CLAMP ODIE PAVO PA-FF PPDA PP6853 PP-AC POLYAMIDE * 1 POLYAMIDE* 1 POLYPROPYLENE POLYPROPYLENE POLYPROPYLENE LACK LACK WITE WITE LACK MECANICAL PROPERTIE 1500 N/mm N/mm N/mm N/mm N/mm 2 (IO 527-1/-2) (IO 527-1/-2) (IO 527 / at 23 C 50 mm/min) (ICE ) (IO 527) 35 kj/m 2 at 23 C 20 kj/m 2 at 23 C 11,8 kj/m 2 at 23 C 16 kj/m 2 at 23 C 6,1 kj/m 2 at 23 C (acc. to Charpy / IO 179/1eA) (acc. to Charpy / IO 179/1eA) (acc. to IZOD / IO 180/1A) (acc. to Charpy / IO 179/1eU) (acc. to Charpy / IO 180/1A) 4,9 kj/m 2 at -25 C 3,6 kj/m 2 at -20 C (acc. to IZOD / IO 180/1A) (acc. to Charpy / IO 180/1A) 45 N/mm 2 50 N/mm 2 15,1 N/mm 2 20,4 N/mm 2 26 N/mm 2 (IO 527-1/-2) (IO 527-1/-2) (IO 527 / at 23 C 50 mm/min) (ICE ) (IO 527-2) 100 N/mm N/mm 2 57 N/mm 2 (IO ) (IO ) (IO 2039) TERMAL PROPERTIE -30 C C -30 C C -25 C C -25 C C -20 C C PECIAL PROPERTIE PREVENTIVE FIRE PROTECTION PREVENTIVE FIRE PROTECTION PREVENTIVE FIRE PROTECTION PREVENTIVE FIRE PROTECTION CORROION PREVENTION Tested and approved according to UL94 ( Vertical urning Test ) - classification: 94V-0 (thickness: 0,4mm) Tested and approved according to DIN 5510, Part 2 - combustibility classification: 3 - smoke development classification: R2 - dripping classification: T2 Tested and approved according to NF F classification: I3 / F2 Tested and approved according to DIN 5510, Part 2 - combustibility classification: 4 - smoke development classification: R2 - dripping classification: T2 Tested and approved according to Def tan assessment: category Approved by the UK MoD Tested and approved according to assessment: category 1a Compliant with the requirements of London Underground / Metronet (standard : Fire afety Performance of Materials ) Tested and approved according to DIN 5510, Part 2 - combustibility classification: 3 - smoke development classification: R2 - dripping classification: T2 alt spray cabinet trials according to IO 9227 / ATM 117 and also internal 5 cycles O2 studies - delays the formation of crevice corrosion by depositing a special corrosion protection inhibitor in the gap between clamp body and stainless steel pipe - lengthens maintenance intervals - minimises servicing requirements and costs - delivers tremendous potential savings Tested and approved according to Def tan assessment: category NOTE * 1 The stated information has been defined for conditions according to IO

52 PIPE CLAMP TECNICAL APPENDIX RECOMMENDED DITANCE ETWEEN CLAMP TREAD CART Metric vs. UNC Thread A The recommended distances between clamps stated below are standard values and are valid for static loads. TANDARD ERIE TAUFF Metric UNC Group Thread Thread 1 1A Pipe-O.D. Distance A [mm] [m] 6,0 12,7 1,0 12,7 22,0 1,2 22,0 32,0 1,5 32,0 38,0 2,0 38,0 57,0 2,7 57,0 75,0 3, M 6 1 /4 20 UNC ,0 76,1 3,5 76,1 88,9 3,7 88,9 102,0 4,0 102,0 114,0 4,5 114,0 168,0 5,0 168,0 219,0 6,0 219,0 324,0 6,7 324,0 356,0 7,0 356,0 406,0 7,5 406,0 419,0 8,2 419,0 508,0 8,5 508,0 521,0 9,0 521,0 558,0 10,0 558,0 800,0 12,5 EAVY ERIE TAUFF Metric UNC Group Thread Thread 3 4 M 10 3 /8 16 UNC 5 6 M 12 7 /16 14 UNC 7 M 16 5 /8 11 UNC 8 M 20 3 /4 10 UNC 9 M 24 7 /8 9 UNC 10 M /8 7 UNC M /4 7 UNC AIC MOUNTING INTRUCTION Pipe bends should be supported by TAUFF clamps as near to the bends as possible. Furthermore, it is recommended to design these clamps as fixed point clamps. The first clamp should be placed directly behind the threaded connection or coupling. This protects the threaded connection or coupling from vibrations. If valves are incorporated in the pipelines, it is recommended that support is provided in front of and behind these valves TWIN ERIE TAUFF Metric UNC Group Thread Thread 1 D M 6 1 /4 20 UNC 2 D 3 D 4 D 5 D M 8 5 /16 18 UNC 52

53 PIPE CLAMP TECNICAL APPENDIX Tightening Torques And Maximum Loads In Pipe Direction F All tightening torques and maximum loads in pipe direction refer to clamps with cover plates and hexagon head bolts acc. to DIN EN IO 4014/4017 (DIN 931/933). The max. load in pipe direction (acc. to DIN 3015, part 10) is an average value, determined by three tests at 23 C with a steel pipe acc. to DIN EN 10220, t 37 rolled surface taking static friction into consideration. liding starts when the shown values (F) are reached. TANDARD ERIE (according to DIN 3015, part 1) exagon Polypropylene Polyamide Aluminum TAUFF ead olt Tightening Max. load in Tightening Max. load in Tightening Max. load in Group DIN EN IO 4014/4017 torque pipe direction F torque pipe direction F torque pipe direction F (DIN 931/933) [Nm] [kn] [Nm] [kn] [Nm] [kn] 1 8 0,6 10 0,6 12 3,5 1A 8 1,1 10 0,7 12 4, ,3 10 0,8 12 4,3 3 M 6 8 1,4 10 1,6 12 4, ,5 10 1,7 12 5, ,9 10 2,0 12 7, ,0 10 2,5 12 8,9 EAVY ERIE (according to DIN 3015, part 2) exagon Polypropylene Polyamide Aluminum TAUFF ead olt Tightening Max. load in Tightening Max. load in Tightening Max. load in Group DIN EN IO 4014/4017 torque pipe direction F torque pipe direction F torque pipe direction F (DIN 931/933) [Nm] [kn] [Nm] [kn] [Nm] [kn] ,6 20 4, ,1 4 M ,9 20 4, , ,3 25 5, ,5 6 M ,2 40 9, ,4 7 M , , ,9 8 M , , ,0 9 M , , , , , ,5 11 M , , , , , ,5 TWIN ERIE (according to DIN 3015, part 3) exagon Polypropylene Polyamide TAUFF ead olt Tightening Max. load in Tightening Max. load in Group DIN EN IO 4014/4017 torque pipe direction F torque pipe direction F (DIN 931/933) [Nm] [kn] [Nm] [kn] 1 D M 6 5 0,9 5 0,9 2 D 12 2,1 12 2,2 3 D 12 1,9 12 2,0 4 D M ,7 12 2,9 5 D 8 1,7 8 2,5 General Information / Terms of Liability The outlined particulars are approximate values and are only valid as references, which are not binding, also with regard to possible protection of third parties, and they do not exempt you from your own examination of suitability of the products delivered by us. Therefore, these values can only be used in a limited sense for construction purposes. The application of the products is carried out outside our control possibilities and, therefore, is exclusively subject to your own area of responsibility. If, however, liability should be possible, it would be limited for all damages to the value of the goods supplied by us and in use by you. It goes without saying, that we guarantee the perfect quality of our products according to our general sales and delivery conditions. ecause of technical advances, dimensions subject to change without notification. This catalog supercedes all previous catalogues. 53

54 TAUFF CLAMP Clamping systems for pipes, hoses, cables and components; custom-made special clamps TAUFF TET Walter tauffenberg Gmb & Co. KG P.O.ox D Werdohl Im Ehrenfeld 4 D Werdohl Tel Fax sales@stauff.com Internet: Measuring systems for pressure monitoring of fluid and gaseous media; venting and sampling of fluid and gaseous pressure systems TAUFF FILTRATION TECNOLOGY Filter systems for the basic equipment of mobile and industrial hydraulic applications; wide range of replacement filter elements TAUFF DIAGTRONIC Components and services for the monitoring and analysis of hydraulic fluids for the mobile and industrial hydraulic sectors TAUFF YDRAULIC ACCEORIE Components for the construction of hydraulic reservoirs and power units for the mobile and industrial hydraulic sectors TAUFF FLANGE plit flange clamps, one-pice flange clamps and flange adaptors acc. to IO /2 and AE J518; square flanges and flange adaptors acc. to IO 6164 and CETOP RP 63 ; pump flanges TAUFF MACINED PART Precision parts machined from stainless steel, carbon steel, non-ferrous metals and thermoplastics for all fields of industry TAUFF KA-C-ENG-A /2007