Industrial Shock Absorbers MC33 to MC64

Transcription

1 Indutrial Shock Aborber MC33 to MC64 Self-Compenating Thi range of elf-compenating hock aborber i part of the innovative MAGUM erie from ACE. You profit from the enhanced product life in the mot difficult operating environment provided by the latet eal technology, hardened main bearing and alo the integrated poitive top. You achieve 50% more energy aborption capacity and a much wider range of effective weight capability (between 3 and !). Thi offer you the capability of mounting hock aborber with the highet energy capacity rating for their ize in the indutry and allow full exploitation of your machinery potential. You can acce new poibilitie in machine deign and contruction ince thi range offer uch feature a a fully threaded outer body and a new clamping flange ytem. Button Integrated Poitive Stop Seal Main Bearing Fully Threaded Outer Body Membrane Accumulator Increaed Piton Area Hardened Piton Ring Hardened One-Piece Preure Chamber Heavy Duty One-Piece Steel Outer Body Impact velocity range: 0.15 to 5 m/, on requet under 0.15 m/ and up to 20 m/. Operating fluid: Automatic Tranmiion Fluid (ATF) Material: Shock aborber body: itride hardened teel. Acceorie: Steel with black oxide finih or nitride hardened. Piton rod: Steel hardened and chrome plated. end button: Hardened teel with black oxide finih. pring: Zinc plated or platic-coated. For optimum heat diipation do not paint hock aborber. Capacity rating: For emergency ue only application it i ometime poible to exceed the publihed capacity rating. Pleae conult ACE for further detail. If your appli cation exceed the tabulated figure ( energy per hour r) conider additional cooling. Ak ACE for further detail. Mounting: In any poition Operating temperature range: -12 C to 70 C. Higher and lower temperature ee page 50 to 51. On requet: Plated finihe. Weartec finih (eawater reitant), pecial oil. Mounting inide air cylinder and other pecial option are available on requet. oie reduction: 3 to 7 db when uing the impact button with urethane inert.

2 Indutrial Shock Aborber MC/MA/ML33 Self-Compenating and Adjutable Adjuter Ring (only MA and ML) Ø 39.6 Poitive Stop L2 6.5 B max Ø M36x1.5 and Mx1.5 alo available to order Thread UF 1 1/4-12 alo available on requet (omit uffix -M from part number) Adjuter (only MA and ML) S L1 max Side Foot Mounting Kit 20 S33 = 2 flange + 4 crew M6x, DI 912 Becaue of the thread pitch the fixing hole for the econd foot mount hould only be drilled and tapped after the firt foot mount ha been fixed in poition. L3 20 Ø 7 Tightening torque: 11 m torque: > 90 m R10 C33 14 L5 max thick 13 thick H8 10 H8 SF H14 Ø10 h9 13 Pin Retainer Ø L6 max Clevi Mounting Kit 10 C33 = 2 clevi eye. Delivered aembled to hock aborber. Ue poitive top at both end of travel. 32 Clevi Flange Ø SF33 = flange + 4 crew M6x20, DI 912 Tightening torque: 7.5 m torque > 50 m Secure with pin or ue additional bar. Due to limited force capacity the repective ability hould be reviewed by ACE. Dimenion 1 B max L1 L1 max L2 L3 L5 max L6 max mm MC, MA, ML33EUM MC, MA, ML3350EUM oal troke length (without integral top collar fitted). Capacity Chart MC33 Energy Capacity Self-Compenating m/cycle Soft -0 1 Effective me Hard -4 Reet MC33EUM MC3350EUM Capacity Chart MA/ML33 Energy Capacity Adjutable m/cycle 1 Effective me. Reet MA33EUM ML33EUM MA3350EUM ML3350EUM The effective weight range limit can be raied or lowered to pecial order. 2 For emergency ue only application it i ometime poible to exceed the above rating. Pleae conult ACE for further detail. Specification relate to the effective troke length (B max).

3 Indutrial Shock Aborber MC/MA/ML33 Shock Aborber Acceorie M33 PP33 QF33 Ø 6.6 Ø ee hock aborber dim. Ø Thickne 10 mm 43 Locking Ring Poly Button Optional button with elatomer inert for noie uppreion. Option upplied ready mounted onto the hock aborber. Intall with 4 machine crew Tightening torque: 11 m torque: > 90 m BV33 BV AS33 24 Ø Adaptor Adaptor Mounting, intallation etc. ee page 38 to 39 and ee hock aborber dim Switch Stop Collar inc. Proximity Switch and Poly Button with elatomer inert PB33 PB Ø15 Ø 35 Ø 15 Ø Mounting, intallation etc. ee page Total intallation length of the hock aborber inc. teel hroud Ordering Example Self-Compenating Thread Size M33 mm EU Compliant Metric Thread (omitted when uing thread UF 1 1/4-12) Effective Range Verion MC33EUM-1 Model Prefix Standard Model with Spring MC Self-Compenating MA Adjutable ML Adjutable, for lower impact velocity Special Model without Spring MCA, MAA, MLA with Spring MCS, MAS, MLS without Spring MC, MA, ML 43

4 Indutrial Shock Aborber MC/MA/ML Self-Compenating and Adjutable 44 Adjuter Ring (only MA and ML) Ø 55.6 Poitive Stop Ø 35 L2 Ø B max Thread UF 1 3/4-12 alo available on requet (omit uffix -M from part number) Adjuter (only MA and ML) S 16 L1 max 12.5 Side Foot Mounting Kit S = 2 flange + 4 crew M8x50, DI 912 Becaue of the thread pitch the fixing hole for the econd foot mount hould only be drilled and tapped after the firt foot mount ha been fixed in poition. L3 28 Ø 9 60 Tightening torque: 27 m torque: > 350 m R14 C 28 L5 max thick 20 thick H8 16 H8 SF 21 H14 15 Pin Retainer Ø16 h Ø L6 max Ø Clevi Mounting Kit C = 2 clevi eye. Delivered aembled to hock aborber. Ue poitive top at both end of travel. Clevi Flange SF = flange + 4 crew M8x20, DI 912 Tightening torque: 7.5 m torque: > 1 m Secure with pin or ue additional bar. Due to limited force capacity the repective ability hould be reviewed by ACE. Dimenion 1 B max L1 L1 max L2 L3 L5 max L6 max mm MC, MA, MLEUM MC, MA, ML50EUM MC, MA75EUM oal troke length (without integral top collar fitted). Capacity Chart MC Energy Capacity Self-Compenating m/cycle Soft Effective me -2-3 Hard -4 Reet MCEUM MC50EUM MC75EUM Capacity Chart MA/ML Energy Capacity Adjutable m/cycle 1 Effective me. Reet MAEUM MLEUM MA50EUM ML50EUM MA75EUM The effective weight range limit can be raied or lowered to pecial order. 2 For emergency ue only application it i ometime poible to exceed the above rating. Pleae conult ACE for further detail. Specification relate to the effective troke length (B max). 44

5 Indutrial Shock Aborber MC/MA/ML Shock Aborber Acceorie M PP QF Ø 9 Ø ee hock aborber dim. Ø Thickne 12 mm Locking Ring Poly Button Optional button with elatomer inert for noie uppreion. Option upplied ready mounted onto the hock aborber. Intall with 4 machine crew Tightening torque: 27 m torque: > 200 m BV 20 BV AS 30 Ø Ø Ø 57 Adaptor Mounting, intallation etc. ee page 38 to 39 and Adaptor ee hock aborber dim Switch Stop Collar inc. Proximity Switch and Poly Button with elatomer inert PB PB Ø 20 Ø 20 Ø 48 Ø Mounting, intallation etc. ee page Total intallation length of the hock aborber inc. teel hroud Ordering Example Adjutable Thread Size M mm EU Compliant Metric Thread (omitted when uing thread UF 1 3/4-12) MLEUM Model Prefix Standard Model with Spring MC Self-Compenating MA Adjutable ML Adjutable, for lower impact velocity Special Model without Spring MCA, MAA, MLA with Spring MCS, MAS, MLS without Spring MC, MA, ML

6 Indutrial Shock Aborber MC/MA/ML64 Self-Compenating and Adjutable 46 Adjuter Ring (only MA and ML) Ø 76 Poitive Stop L2 Ø 60 Thread UF 2 1/2-12 alo available on requet (omit uffix -M from part number) S64 B max Ø 48 ote: 150 mm troke model doe not include top collar and poitive top i provided by the rod button (Ø 60 mm) 12 Adjuter (only MA and ML) 12.5 L1 max Side Foot Mounting Kit S64 = 2 flange + 4 crew M10x, DI 912 Becaue of the thread pitch the fixing hole for the econd foot mount hould only be drilled and tapped after the firt foot mount ha been fixed in poition. L3 Ø Tightening torque: 50 m torque: > 350 m R20 C64 35 L5 max 24 thick 24 thick H8 20 H8 SF64 65 H14 22 Pin Retainer Ø20 h Ø 74 Ø L6 max Clevi Mounting Kit 10 C64 = 2 clevi eye. Delivered aembled to hock aborber. 1 with 150 mm troke Dia. 60 mm. Order C Ue poitive top at both end of travel Clevi Flange Ø SF64 = flange + 4 crew M10x20, DI 912 Tightening torque: 15 m torque: > 200 m Secure with pin or ue additional bar. Due to limited force capacity the repective ability hould be reviewed by ACE. Dimenion 1 B max L1 L1 max L2 L3 L5 max L6 max mm ML64EUM MC, MA, ML60EUM MC, MA64EUM MC, MA64150EUM oal troke length (without integral top collar fitted). Capacity Chart MC64 Energy Capacity Self-Compenating m/cycle Soft Effective me -2-3 Hard -4 Reet MC60EUM MC64EUM MC64150EUM Capacity Chart MA/ML64 Energy Capacity Adjutable m/cycle 1 Effective me. Reet ML64EUM MA60EUM ML60EUM MA64EUM MA64150EUM The effective weight range limit can be raied or lowered to pecial order. 2 For emergency ue only application it i ometime poible to exceed the above rating. Pleae conult ACE for further detail. Specification relate to the effective troke length (B max). 46

7 Indutrial Shock Aborber MC/MA/ML64 Shock Aborber Acceorie M64 PP64 QF64 Ø11 Ø ee hock aborber dim. Ø Thickne 16 mm 47 Locking Ring Poly Button Optional button with elatomer inert for noie uppreion. Option upplied ready mounted onto the hock aborber. Intall with 4 machine crew Tightening torque: 50 m torque: > 210 m BV64 M90x2 20 BV M90x2 20 QF90 Ø11 Ø Ø 170 Adaptor 30 Mounting, intallation etc. ee page 38 and Adaptor Thickne 20 mm Intall with 4 machine crew Tightening torque: 50 m torque: > 210 m PB64 PB Ø 67 Mounting, intallation etc. ee page Ø 67 1 Total intallation length of the hock aborber inc. teel hroud Ordering Example Adjutable Thread Size M64 50 mm EU Compliant Metric Thread (omitted when uing thread UF 2 1/2-12) MA60EUM Model Prefix Standard Model with Spring MC Self-Compenating MA Adjutable ML Adjutable, for lower impact velocity Special Model without Spring MCA, MAA, MLA with Spring MCS, MAS, MLS without Spring MC, MA, ML 47