Drying, Weighing and Grading

Transcription

1 Drying, Weighing and Grading INTRODUCTION Oven, balance and tet ieve with related acceorie are common equipment that are indipenable for all laboratorie for contruction material. We propoe a wide range of model which atify the requirement of all main International Standard and particularly the EN Tet for general propertie of aggregate Part 5: Common equipment and calibration. 16

2 Drying, Weighing and Grading Content Drying Sample Laboratory oven Hot plate...20 Air drier...20 Microwave oven...20 Melting pot...20 Climatic chamber...21 Muffle furnace Weighing Sample Electronic analytical balance...24 Electronic top loading balance...24 Battery operated balance...26 Standard calibration mae...27 Specific gravity...28 Sample grading Sieve...29 Sieve haker Wet wahing ieve...36 Bar ieve Riffle boxe and ample plitter

3 10 Drying, weighing and grading Drying Sample Laboratory oven Heavy duty all tainle teel General decription laboratory oven Epecially uited for oil, aggregate and aphalt teting, thi advanced model feature all tainle teel internal and external lining, with 60 mm thick inulation, fat heat up, eay to read digital control and forced convection airflow for uniform temperature throughout the oven chamber. Eay to lide helve. 200 C maximum temperature. Three model available: l cap. (code 10-D1396) l cap. (code 10-D1397) l cap. (code 10-D1398) Supplied complete with three tray. EN 932-5, EN ASTM C127, C136 - D558, D559, D560, D698, D1557, D1559 BS 1377:1-1924:1 / UNE Digital PID control ytem - Over temperature protection - Stainle teel internal and external lining linen patterned - Forced convection airflow C max. temperature - High temperature uniformity and preciion - Supplied complete with three tray. Detail of external tainle lining: linen patterned reitant to cratche and hock Spare part 10-D1396/1 Spare tray for 10-D1396 oven 10-D1397/1 Spare tray for 10-D1397 oven 10-D D D1398/1 Spare tray for 10-D1398 oven 10-D1398 General pecification M Code Capacity Wattage litre W 10-D D D Internal approx. dimenion mm (wxdxh) External approx. dimenion mm (wxdxh) 560x700x x755x x800x x970x x1040x x1080x1640 Voltage: 230 V, Hz, 1 ph. except 10-D1398, 380 V, Hz, 3 ph. 18 Weight approx. kg

4 Drying, weighing and grading Drying Sample General purpoe drying oven 10 GENERAL PURPOSE DRYING OVENS General decription Thee oven have been pecially deigned for the teting laboratorie of the contruction indutry. The interior i made from zinc coated teel and the exterior i robutly contructed in enamelled teel inulated with 40 to 50 mm thick mineral wool. Temperature control by preciion analogue or digital thermoregulator/indicator. Supplied complete with 3 helve. The model we propoe are available in the following verion: to 400 litre capacity - Natural or forced convection - Temperature range from ambient to 200 C - Analogue or digital thermotat /indicator V, Hz, 1 ph. or 110 V, 60 Hz, 1 ph. on requet. 10-D1391/AD General pecification Nominal 100 l 220 l 400 l capacity model model model B Dimenion - internal (mm) 436x435x x435x x435x935 - external (mm) 705x565x x565x x715x1320 Wattage (W) A Weight (kg) Available model M Code Capacity Natural Forced Digital Voltage litre convec- convec- thermotat/ tion tion indicator Detail of the digital control panel 10-D Ye V/50-60Hz 10-D1390/AD Ye Ye 230V/50-60Hz 10-D Ye V/50-60Hz 10-D1391/AD Ye Ye 230V/50-60Hz 10-D1392/AD Ye Ye 230V/50-60Hz Spare part 10-D1390/1 Spare tray for 100 l cap. oven 10-D1391/1 Spare tray for 220 and 400 l cap. oven 10-D

5 10 Drying, weighing and grading Drying Sample... Hot plate / Air drier / Melting pot General utility hot plate M 10-D1402 Hot plate, 160 mm dia., multipoition witch. 230 V, Hz, 1 ph. M 10-D1402/A Hot plate, 160 mm dia., bimetallic thermotat. 230 V, Hz, 1 ph. Ued in the laboratory for a large variety of application. Two verion available: temperature control by a multipoition witch (10-D1402) or by bimetallic thermotat (10-D1402/A). Plate diameter: 160 mm Wattage: 1000 W B Overall dimenion: 260x260x135 mm A Weight approx.: 3 kg Air drier M 10-D1425 Warm-air drier W, 230 V, 50 Hz, 1 ph. Ued to dry mall quantitie of oil and aggregate particle and ueful for other general laboratory purpoe. Specifically ued in the urface drying of aggregate. A Weight approx.: 1.5 kg 10-D1425 Microwave oven Output power: 90 W / 900 W Internal dimenion: 358x365x246 mm approx. B Outide dimenion: 547x528x339 mm approx. A Weight approx.: 26 kg 10-D1424 Melting pot 10-D1402, 10-D1402/A rectangular hot plate M 10-D1401/D Hot plate, 300x400 mm, aluminium alloy/tainle teel plate. 230 V, Hz, 1 ph. M 10-D1424 Digital microwave oven, 30 litre capacity. 230 V, 50 Hz, 1 ph. Particularly uitable for high peed drying application in the laboratory, uch a drying, conditioning, pre-heating and moiture determination. They provide a fat and accurate drying action. - Large heating area with fat and uniform heating - Utilie microproceor chip for precie temperature control - Heating i teady with anti-electromagnetic interference - Corroion-reitant material prevent corroion and guarantee long life-pan - Elegant and compact deign M 10-D1403 Melting pot. 230 V, Hz, 1 ph. Ued to melt wax and imilar material. The temperature i et and maintained at the deired value. Adjutable electronic thermoregulator and pilot lamp fully iolated conforming to CE requirement. Supplied complete with cover. Specification Capacity: 5 litre approx. Temperature range: +30 / +150 C Power: 700 W B Dimenion: internal 200 mm dia. x 160 mm high, external 285 mm dia. x 275 mm high A Weight approx.: 2.7 kg M 10-D1401/E Digital hot plate, 300x400 mm, aluminium alloy/tainle teel plate. 230 V, Hz, 1 ph. General pecification 10-D1401/E 10-D1401/D Max. temperature: 350 C Power: 2000 W B Overall Dimenion: 400x300x142 mm (lxwxh) A Weight approx.: 18 kg 10-D

6 Drying, weighing and grading Drying Sample Climatic chamber 10 Climatic chamber Introduction We propoe two verion of thi new and advanced Climatic cabinet: -Model 10-D1429 with digital controller for temperature from 25 to +70 C, conforming to EN for Aggregate teting and many other imilar tet on concrete and other contruction material -Model 10-D1429/A with digital controller for both temperature from 25 to +70 C and humidity from 10 to 95%, alo uitable for many other tet a for example concrete and cement curing (EN , EN 196-1). Both model can be upgraded with internal data recording facility, data output port and dedicated PC oftware. See model 10-D1429/REC. M 10-D1429 Temperature controlled cabinet, 520 litre cap., temperature range 25 to +70 C. 230 V, 50 Hz, 1 ph. M 10-D1429/A Temperature and humidity controlled cabinet, 520 litre cap., temperature range 25 to +70 C, humidity range from 10 to 95%. 230 V, 50 Hz, 1 ph. General decription Cabinet Monobloc cabinet made with tainle teel profile with external finih in SCTCH- BRITE. Inulation i provided with high denity polyurethane 60 mm thick. The elf cloing door can open over 100 and i fitted with rechangeable magnetic gaket. The helve are upported on tainle teel guide, which prevent them turning, capable of loading heavy pecimen. The cooling ytem and other component are located in the top of the cabinet for eay inpection and maintenance. Thermotatic unit The cooling group, CFC free, i overpecified for the maximum reliability. It i deigned to condition the air circulating in the cabinet. The cooling circuit i entirely made of copper and i completed with dewater/receiver filter, py gla to verify the paage of freon, high preure manotat and inlet connector. The evaporator ha the ame characteritic of the condener. The de-humidification i obtained by a mooth tube with cyclic thaw. The heating element conit of a tainle teel finned tube with a limit thermotat. The recycling fan are connected directly to the low thermal emiion motor. -Advanced controller with cycle programmer for 50 program and 1000 egment. - Temperature enor movable inide the cabinet or inide the ample conforming to the Standard requirement. - High accuracy: ± 1 C, ± 5% RH (RH with model 10-D1429/A only) - A multipurpoe climatic chamber uitable for teting application in Aggregate, Cement, Concrete, Brick, Block, Aphalt and other contruction material - Optional internal data recording facility, data output port and dedicated PC oftware Control conole The front panel feature a large digital diplay with witche for fan, compreor, reitance, humidifier (10-D1429/A model only) and the alarm led. A multifunction control unit diplay imultaneouly the et point and abolute output value. Temperature enor The PT100 temperature enor i movable inide the cabinet area and can alo be poitioned inide the tet ample conforming to pecific Standard requirement. Humidity enor Allow meaurement of humidity up to RH 100%. Specification Capacity: 520 litre Function controller: cycle programmer for 50 program and 1000 egment Temperature range: 25 to +70 C Humidity range (model 10-D1429/A only): from 10 to 95% Temperature accuracy: ± 1 C Humidity accuracy (model 10-D1429/A only): ± 5% RH Power: Cooling ytem 1000 W Heating ytem 1500 W Internal air circulation: 450 mc/h Internal dimenion (wxdxh): 600x670x1300 mm External dimenion (wxdxh): 720x800x2020 mm Shelve dimenion (lxd): 530x580 mm, no. 4 included, 60 kg cap. each Weight: 180 kg approx 10-D1429 Acceorie M 10-D1429/REC Upgrade of the cabinet controller with internal data recording facility, data output port and dedicated PC oftware. 21

7 10 Drying, weighing and grading Drying Sample... Muffle furnace M 10-D1418/A Muffle furnace 1200 C max. temperature. 230 V, Hz, 1 ph. M 10-D1418/AZ Same a above but 110 V, 60 Hz, 1 ph. EN General decription and pecification Ued for determining the lo on ignition of cement and building lime. 10-D1418 muffle furnace M 10-D1418 Muffle furnace 1100 C max. temperature. 230 V, Hz, 1 ph. M 10-D1418/P Muffle furnace 1100 C max. temperature with temperature programmer. 230 V, Hz, 1 ph. M 10-D1418/AP Same a above but 110 V, 60 Hz, 1 ph. General decription and pecification Ued for high temperature heating and drying. Max. temperature: 1100 C Accuracy: ± 4 C Inide dimenion: 210x320x145 mm (lxwxh) Power: 3.9 kw B Outide dimenion: 510x750x660 mm A Weight approx.: 89 kg Max. temperature: 1200 C Accuracy: ± 4 C Inide dimenion: 210x280x145 mm (lxwxh) Power: 4.2 kw B Outide dimenion: 510x650x650 mm A Weight approx.: 70 kg 10-D1418/A 10-D1419 M 10-D1419 Muffle furnace 1100 C max. temperature. High capacity, floor mounting model V, Hz, 3 ph. Specification Max. temperature: 1100 C Inide dimenion: 300x220x500 mm (wxhxd) Electronic thermoregulator and 24 hour timer Accuracy: ± 4 C Power: 9 kw B Outide dimenion: 750x1650x1100 mm (wxhxd) A Weight : 400 kg approx. 22

8 Drying, weighing and grading weighing ample Balance and cale 11 Introduction Balance are a general purpoe laboratory apparatu ued either for oil, aggregate, cement, concrete and aphalt teting. Control upply a wide range of electronic model uitable for different application ranging from the central laboratorie field ue, educational etc. Battery operated model are particularly uitable for field ue. We alo propoe a range of acceorie and calibration weight to periodically check the balance. How to elect balance Where not pecified by the relevant tandard, the table given below may be ued to elect the appropriate balance conforming to the general pecification for balance given in the ASTM D , BS 1377:Part 1, and EN Very often a ingle pecification require balance having a readability and tolerance of 0.1% of the pecimen ma to be meaured which i another uitable choice criteria. Other tandard covering aggregate and granular material in general give information about the quantity of aggregate to be teted depending upon it ize (UNI 8520 part 5, BS 812: part 1, BS 598 etc.). The different tandard give practically the ame recommendation o we have included thi information in a eparate table. Minimum ma of ample for ieve analyi (1) Nominal ize of material mm <3 0.1 (1) BS 812:1 Minimum ma of ample kg Selection guide conforming to ASTM - BS - EN Standard Weighing range Standard Readability Accuracy (min. capacity) (cale interval (Tolerance)> or digit) 20 to 200 g ASTM C mg ± 0.2 mg (Cement Teting) 200 g ASTM D4753 (GP2) 0.1 g ± 0.2 g BS 1377: g ± g EN g ± g 1200 g ASTM D4753 (GP2) 0.1 g ± 0.2 g BS g ± 0.05 g EN g ± 0.05 g 2000 g ASTM D4753 (GP5) 1 g ± 2 g BS g ± 0.3 g EN g ± 0.3 g 5000 g ASTM D4753 (GP10) 5 g ± 5 g BS g ± 1 g EN g ± 1 g g ASTM D4753 (GP10) 5 g ± 5 g BS g ± 3 g EN g ± 3 g g ASTM D4753 (GP10) 5 g ± 5 g BS g ± 10 g EN g ± 10 g g ASTM D4753 (GP10) 50 g ± 50 g BS g ± 20 g EN g ± 30 g 23

9 11 Drying, weighing and grading Weighing ample... Electronic analytical balance Electronic preciion top loading balance Electronic analytical balance The model we propoe i particularly uitable for cement - heat of hydration teting - where a very high accuracy i requeted. M 11-D0613/B Electronic analytical balance 210 g capacity, 0.1 mg readability. 230 V, Hz, 1 ph. Electronic preciion top loading balance Single pan analytical balance digital reading The model we propoe, very imple to operate and ideal for central laboratorie cover a range from 330 g to g. General pecification Zero tare for the whole range by puh button Percentage diplay of the tare ued Built-in calibrated ma for automatic full cale calibrating operation Data output RS 232 Under balance weighing facility compriing pecific gravity oftware Voltage: 230 V, Hz, 1 ph. For 110 V, 60 Hz elect uitable adapter (ee Table) Automatic changeover of cale enitivity (dual range model only) 11-D0613/B General pecification Capacity: 205 g Readability: 0.1 mg Tolerance: ± 0.3 mg Tare range: by ubtraction up to full capacity Diplay: LCD even egment Data interface: bi-directional RS 232, electable baud rate Facility for weighing underneath the balance Power upply: 230 V AC, Hz Pan dia.: 80 mm B Dimenion: 194x325x315 mm A Weight approx.: 8.5 kg approx. Acceorie M 11-D0628/3 AC adapter for 110 V, 60 Hz, 1 ph. (For ue with 11-D0613/B) 11-D D0628 M Code Capacity Readability Pan Weight 110 V, 60 Hz and dimenion approx. adapter tolerance code 11-D g g 110 mm dia. 6.5 kg 11-D0628/3 11-D g 0.01 g 160 mm dia. 6.5 kg 11-D0628/3 11-D0629/A 4100 g 0.01 g 160 mm dia. 6.5 kg 11-D0628/3 11-D0630/AA 6000 g 0.1 g 150x170 mm 2 kg 11-D0630/3 11-D0630/BB 8000 g 0.1 g 150x170 mm 2 kg 11-D0630/3 11-D0631/B g 0.1 g 320x210 mm 8 kg 11-D0628/3 11-D0631/EE g 1 g 340x240 mm 7 kg 11-D0630/3 11-D0631/F g 0.1 g 320x210 mm 8 kg 11-D0628/3 11-D0631/CC g 1 g 340x240 mm 7 kg 11-D0630/3 24

10 Drying, weighing and grading weighing ample Electronic preciion top loading balance -Dual range model 11 Electronic preciion top loading balance - Dual range model (automatic changeover of cale enitivity) M Code Capacity Readability Pan Weight 110 V, 60 Hz and dimenion approx. adapter tolerance code 11-D0630/C 600/4500 g 0.01/0.1 g 160 mm dia. 7.5 kg 11-D0628/3 11-D0630/D 800/5500 g 0.01/0.1 g 160 mm dia. 7.5 kg 11-D0628/3 11-D0631/G 1000/10000 g 0.1/1 g 190x210 mm 7.5 kg 11-D0628/3 11-D0631/L 4500/30000 g 0.1/1 g 320x210 mm 8 kg 11-D0628/3 - All model fitted with Data output RS 232 via erialport RS 232 weighing facility and oftware. Acceorie Serial printer Thee palm ize light weight digital printer are ideal either for laboratory or field ue. They are available in three verion: M 82-P0172 Serial printer main operated 230 V, Hz, 1 ph. M 82-P0172/Z Serial printer main operated 110 V, 60 Hz, 1 ph. M 82-P0172/A Serial printer with rechargeable internal battery or tandard battery M 82-P0172/1 Cable for RS 232 connection 11-D0631/L 82-P0172 General pecification Printing method: erial dot impact Font: 5x8 matrix No. of column: 24 Paper width: 57.5 mm Interface: Serial RS 232 B External dimenion: 120x172x100 mm A Weight approx.: 1 kg 11-D0629/A with 82-P0172 printer 25

11 11 Drying, weighing and grading Weighing ample... Battery operated balance/ Platform balance Battery operated top pan and platform balance Thee precie, economical and very eay to ue balance are ideal for both central and ite laboratorie. All model are fitted with RS 232 output o they can be connected to printer or PC to proce data. Uing the AC adapter they can alo be main operated. Strong and robut, fitted with train gauge cell with large backlit diplay, they can operate from 0 to 40 C. Other general pecification are given in the following table. All model are upplied complete with AC adapter for 230 V, Hz. For 110 V, 60 Hz AC elect uitable adapter. See Table. The batterie are not included. Code Capacity Reada- Tolerance Pan dimenion Weight 110 V, 60 Hz bility main adapter code 11-D g 0.01 g ± 0.02 g 120 mm dia. 1.2 kg 11-D0642/1 11-D0641/F 3000 g 0.01 g ± 0.01 g 120 mm dia. 1.2 kg 11-D0642/1 11-D0642/G 6000 g 0.1 g ± 0.1 g 225x300 mm 3.8 kg 11-D0642/1 11-D g 0.5 g ± 1.5 g 250x210 mm 3.5 kg 11-D0643/1 11-D0643/A g 0.5 g ± 1.5 g 210x210 mm 2.6 kg 11-D0643/A1 11-D0643/B g 1 g ± 3 g 250x210 mm 3.5 kg 11-D0643/B1 11-D g 0.2 g ± 0.2 g 225x300 mm 3.5 kg 11-D0642/1 11-D0644/B g 0.5 g ± 0.5 g 225x300 mm 3.5 kg 11-D0642/1 11-D0644/C g 1 g ± 3 g 340x240 mm 6.5 kg - 11-D0644/CZ g 1 g ± 3 g 340x240 mm 6.5 kg included 11-D0643/B 11-D D0642 platform balance Battery and main operated with adaptor 11-D0644/C Strong and robut, fitted with train gauge cell with large backlit diplay, they can operate from 0 to 40 C. Complete with RS 232 port for PC or printer and vertical upport for digital diplay. All model are upplied complete with AC adapter for 230 V, Hz, 1 ph. For 110 V, 60 Hz elect uitable adapter (ee table). Other general pecification are given in the following table. 26

12 Drying, weighing and grading weighing ample Standard calibration mae HIGH CAPACITY MODELS Code Capacity Reada- Tolerance Pan Weight 110 V, 60 Hz bility dimenion main adapter code 11-D0647/AA 60 kg 1 g ± 2 g 340x240 mm 6.5 kg 11-D0630/3 11-D0649/AA* 150 kg 5 g ± 5 g 315x305 mm 5 kg 11-D0630/3 11-D0648/B* 300 kg 10 g ± 10 g 460x600 mm 25 kg 11-D0642/1 * Platform model Wooden box for weight M 11-D0708 Wooden box for ingle weight up to 500 g M 11-D0708/1 Same a above but for 1 kg weight M 11-D0708/2 Same a above but for 2 kg weight M 11-D0708/3 Same a above but for 5 kg weight 11-D0648/B fitted with vertical upport M 11-D0708/4 Same a above but for 10 kg weight StANDARD CALIBRATION MASSES Ued for the periodic checking of the balance. Cla M1 (1), bra weight tolerance ± 50 ppm at 1 kg level. The tandard weight cla M1 (code 11-D0700/C to 11-D0707/C) are upplied complete with manufacturer certificate of conformity. The calibrated weight (code 11-D0700/C1 to 11-D0707/C1) are upplied complete with SIT (EAL) calibration certificate and wooden box. 11-D D0708/4 Weight Cla M1 Tole- Cla M1 Code rance complete with SIT (EAL) calibration (mg) certificate and wooden box 50 g 11-D0700/C ± 3 11-D0700/C1 100 g 11-D0701/C ± 5 11-D0701/C1 200 g 11-D0702/C ± D0702/C1 500 g 11-D0703/C ± D0703/C1 1 kg 11-D0704/C ± D0704/C1 2 kg 11-D0705/C ± D0705/C1 5 kg 11-D0706/C ± D0706/C1 10 kg 11-D0707/C ± D0707/C1 (1) Other calibration mae cla F1 and F2 available on requet. 11-D0700/C - D0707/C Note. Thee weight are upplied with manufacturer certificate of conformity pecifying characteritic cla and tolerance. The certificate i traceable to SIT tandard. 27

13 11 11 Drying, weighing and grading Weighing ample... Specific gravity / Denity baket Specific gravity EN / BS 812:2, 1881:114 - Immediate calculation and diplay of pecific gravity at the touch of a button M 11-D0612/A Specific gravity frame General decription and pecification Ued in conjunction with a uitable electronic balance for pecific gravity determination of freh and hardened concrete and aggregate. A purpoe built robut frame deigned to upport the electronic balance. The lower part of the frame incorporate a moving platform, which carrie the water container allowing the tet pecimen to be weighed in both air and water. The balance i not included in the apparatu and mut be ordered eparately. Any type of electronic balance fitted with an under-bench weighing facility can be ued. The model lited a acceorie below are ideally uited for ue with thi pecific gravity frame. B Overall dimenion: 500x500x1200 mm approx. A Weight approx.: 50 kg Acceorie and uitable balance 11-D0612/A1 Cradle for holding pecimen 11-D0630 Digital top pan balance 4500 g x 0.1 g capacity 11-D0631/E Digital top loading balance 15 kg x 1 g capacity 11-D0631/F Digital top pan balance 16 kg x 0.1 g capacity 11-D0631/C Digital top pan balance 30 kg x 1 g capacity The above model incorporate a program, which allow pecific gravity reult to be calculated and diplayed immediately at the touch of a button. Specific gravity Denity baket and tank ASTM C127 / AASHTO T85 / BS 812:2 / NF P Decription Ued in pecific gravity tet. Made from tainle teel. Complete with handle. Fitted with 3.35 mm meh ize except the NF model, 3 mm. M 11-D0612 Denity baket 200 mm dia. x 200 mm high 11-D0612/A with acceorie M 11-D0612/1 Same a above but 250 mm dia. x 250 mm high M 11-D0612/2 Same a above but 200 mm dia. x 180 mm high conforming to NF P M 11-D0611/3 Specific gravity tank Made from platic. Identical to that one fitted in the 11-D0612/A Specific gravity frame. Dimenion 400x400x330 mm approx. (lxwxh). Weight 1.7 kg approx. 11-D D0611/3 28

14 Drying, weighing and grading Sample grading Teting ieve Introduction Specification We propoe a complete range of full depth teting ieve with 200 mm, 8, 250 mm, 300 mm, 12, 315 mm and 450 mm dia., with woven wire cloth and perforated plate conforming to the different tandard. On requet we can alo upply model with round hole perforated plate from 1 to 100 mm dia. All frame except the 450 mm dia., and wire cloth ieve are manufactured from tainle teel. Perforated plate are made from tinned teel. Sieve having the ame nominal diameter are deigned to net one in each other. Uing 200 mm (8 ) ieve it i poible to tet up to 1000 g of aggregate and 3000 g with 300 mm (12 ) dia. Standard a) European Conforming to the new European EN tandard all ieve for the contruction indutry are pecified by the following tandard: EN Tet for geometrical propertie of aggregate Determination of particle ize ditribution Tet ieve, nominal ize of aperture ISO Tet ieve of woven wire cloth ISO Tet ieve of perforated metal plate ISO 565 Nominal ize of opening for woven wire and perforated plate ieve. The mot common national tandard including BS 410, NF X11-504, DIN , UNI , UNE 7050 are practically identical to the ISO and 2, except for ome miing opening which have been included in the lit for thoe uer who prefer to complete or ubtitute exiting old et. The new European tandard alo pecify that: Sieve with aperture ize of 4 mm and above hall be perforated plate quare hole tet ieve. Below that ize they hall be woven wire tet ieve. b) American The ieve are conforming to the following tandard: ASTM E11 Wire-cloth ieve for teting purpoe. Note. The ieve pecification are clearly marked on the label compriing the erial number and other information for the identification and traceability of the product a requeted by the international pecification. On requet each ieve can be upplied with a calibration certificate. TRACEABLE CERTIFICATE OF CALIBRATION All ieve can be upplied, on requet, with traceable certificate of calibration. I cae of requet add to the code number the uffix C. Example: for an ISO tet ieve, 200 mm dia. 1 mm opening, the code become 15-D2215/JC. 29

15 15 Drying, weighing and grading Sample grading... Teting ieve ISO * Tet ieve of woven cloth Nominal Code Code Code Code Code aperture 200 mm dia. 250 mm dia. 300 mm dia. 315 mm dia. 450 mm dia. 38 µm 15-D2360/J 15-D2360/F 15-D3360/J 15-D3360/F 15-D4360/J 40 µm 15-D2355/J 15-D2355/F 15-D3355/J 15-D3355/F 15-D4355/J 45 µm 15-D2350/J 15-D2350/F 15-D3350/J 15-D3350/F 15-D4350/J 50 µm 15-D2345/J 15-D2345/F 15-D3345/J 15-D3345/F 15-D4345/J 53 µm 15-D2340/J 15-D2340/F 15-D3340/J 15-D3340/F 15-D4340/J 63 µm 15-D2335/J 15-D2335/F 15-D3335/J 15-D3335/F 15-D4335/J 75 µm 15-D2330/J 15-D2330/F 15-D3330/J 15-D3330/F 15-D4330/J 80 µm 15-D2325/J 15-D2325/F 15-D3325/J 15-D3325/F 15-D4325/J 90 µm 15-D2320/J 15-D2320/F 15-D3320/J 15-D3320/F 15-D4320/J 100 µm 15-D2315/J 15-D2315/F 15-D3315/J 15-D3315/F 15-D4315/J 106 µm 15-D2310/J 15-D2310/F 15-D3310/J 15-D3310/F 15-D4310/J 125 µm 15-D2305/J 15-D2305/F 15-D3305/J 15-D3305/F 15-D4305/J 150 µm 15-D2300/J 15-D2300/F 15-D3300/J 15-D3300/F 15-D4300/J 160 µm 15-D2295/J 15-D2295/F 15-D3295/J 15-D3295/F 15-D4295/J 180 µm 15-D2290/J 15-D2290/F 15-D3290/J 15-D3290/F 15-D4290/J 200 µm 15-D2285/J 15-D2285/F 15-D3285/J 15-D3285/F 15-D4285/J 212 µm 15-D2280/J 15-D2280/F 15-D3280/J 15-D3280/F 15-D4280/J 250 µm 15-D2275/J 15-D2275/F 15-D3275/J 15-D3275/F 15-D4275/J 300 µm 15-D2270/J 15-D2270/F 15-D3270/J 15-D3270/F 15-D4270/J 315 µm 15-D2265/J 15-D2265/F 15-D3265/J 15-D3265/F 15-D4265/J 355 µm 15-D2260/J 15-D2260/F 15-D3260/J 15-D3260/F 15-D4260/J 400 µm 15-D2255/J 15-D2255/F 15-D3255/J 15-D3255/F 15-D4255/J 425 µm 15-D2250/J 15-D2250/F 15-D3250/J 15-D3250/F 15-D4250/J 500 µm 15-D2245/J 15-D2245/F 15-D3245/J 15-D3245/F 15-D4245/J 600 µm 15-D2240/J 15-D2240/F 15-D3240/J 15-D3240/F 15-D4240/J 630 µm 15-D2235/J 15-D2235/F 15-D3235/J 15-D3235/F 15-D4235/J 710 µm 15-D2230/J 15-D2230/F 15-D3230/J 15-D3230/F 15-D4230/J 800 µm 15-D2225/J 15-D2225/F 15-D3225/J 15-D3225/F 15-D4225/J 850 µm 15-D2220/J 15-D2220/F 15-D3220/J 15-D3220/F 15-D4220/J 1 mm 15-D2215/J 15-D2215/F 15-D3215/J 15-D3215/F 15-D4215/J 1.18 mm 15-D2210/J 15-D2210/F 15-D3210/J 15-D3210/F 15-D4210/J 1.25 mm 15-D2205/J 15-D2205/F 15-D3205/J 15-D3205/F 15-D4205/J 1.4 mm 15-D2200/J 15-D2200/F 15-D3200/J 15-D3200/F 15-D4200/J 1.6 mm 15-D2195/J 15-D2195/F 15-D3195/J 15-D3195/F 15-D4195/J 1.7 mm 15-D2190/J 15-D2190/F 15-D3190/J 15-D3190/F 15-D4190/J 2 mm 15-D2185/J 15-D2185/F 15-D3185/J 15-D3185/F 15-D4185/J 2.36 mm 15-D2180/J 15-D2180/F 15-D3180/J 15-D3180/F 15-D4180/J 2.5 mm 15-D2175/J 15-D2175/F 15-D3175/J 15-D3175/F 15-D4175/J 2.8 mm 15-D2170/J 15-D2170/F 15-D3170/J 15-D3170/F 15-D4170/J 3.15 mm 15-D2165/J 15-D2165/F 15-D3165/J 15-D3165/F 15-D4165/J 3.35 mm 15-D2160/J 15-D2160/F 15-D3160/J 15-D3160/F 15-D4160/J 4 mm 15-D2155/J 15-D2155/F 15-D3155/J 15-D3155/F 15-D4155/J 4.75 mm 15-D2150/J 15-D2150/F 15-D3150/J 15-D3150/F 15-D4150/J 5 mm 15-D2145/J 15-D2145/F 15-D3145/J 15-D3145/F 15-D4145/J 5.6 mm 15-D2140/J 15-D2140/F 15-D3140/J 15-D3140/F 15-D4140/J 6.3 mm 15-D2135/J 15-D2135/F 15-D3135/J 15-D3135/F 15-D4135/J 6.7 mm 15-D2130/J 15-D2130/F 15-D3130/J 15-D3130/F 15-D4130/J 8 mm 15-D2125/J 15-D2125/F 15-D3125/J 15-D3125/F 15-D4125/J 9.5 mm 15-D2120/J 15-D2120/F 15-D3120/J 15-D3120/F 15-D4120/J 10 mm 15-D2115/J 15-D2115/F 15-D3115/J 15-D3115/F 15-D4115/J 11.2 mm 15-D2110/J 15-D2110/F 15-D3110/J 15-D3110/F 15-D4110/J 12.5 mm 15-D2105/J 15-D2105/F 15-D3105/J 15-D3105/F 15-D4105/J 13.2 mm 15-D2100/J 15-D2100/F 15-D3100/J 15-D3100/F 15-D4100/J 14 mm* 15-D2096/J 15-D2096/F 15-D3096/J 15-D3096/F 15-D4096/J 16 mm 15-D2095/J 15-D2095/F 15-D3095/J 15-D3095/F 15-D4095/J 18 mm* 15-D2091/J 15-D2091/F 15-D3091/J 15-D3091/F 15-D4091/J 19 mm 15-D2090/J 15-D2090/F 15-D3090/J 15-D3090/F 15-D4090/J 20 mm 15-D2085/J 15-D2085/F 15-D3085/J 15-D3085/F 15-D4085/J 22.4 mm 15-D2080/J 15-D2080/F 15-D3080/J 15-D3080/F 15-D4080/J 25 mm 15-D2075/J 15-D2075/F 15-D3075/J 15-D3075/F 15-D4075/J 26.5 mm 15-D2070/J 15-D2070/F 15-D3070/J 15-D3070/F 15-D4070/J 31.5 mm 15-D2065/J 15-D2065/F 15-D3065/J 15-D3065/F 15-D4065/J 37.5 mm 15-D2060/J 15-D2060/F 15-D3060/J 15-D3060/F 15-D4060/J 40 mm 15-D2055/J 15-D2055/F 15-D3055/J 15-D3055/F 15-D4055/J 45 mm 15-D2050/J 15-D2050/F 15-D3050/J 15-D3050/F 15-D4050/J 50 mm 15-D2045/J 15-D2045/F 15-D3045/J 15-D3045/F 15-D4045/J 53 mm 15-D2040/J 15-D2040/F 15-D3040/J 15-D3040/F 15-D4040/J 56 mm 15-D2035/J 15-D2035/F 15-D3035/J 15-D3035/F 15-D4035/J 63 mm 15-D2030/J 15-D2030/F 15-D3030/J 15-D3030/F 15-D4030/J 75 mm 15-D2025/J 15-D2025/F 15-D3025/J 15-D3025/F 15-D4025/J 80 mm 15-D2020/J 15-D2020/F 15-D3020/J 15-D3020/F 15-D4020/J 90 mm 15-D2015/J 15-D2015/F 15-D3015/J 15-D3015/F 15-D4015/J 100 mm 15-D2010/J 15-D2010/F 15-D3010/J 15-D3010/F 15-D4010/J 125 mm 15-D2005/J 15-D2005/F 15-D3005/J 15-D3005/F 15-D4005/J Pan and cover 15-D2004/J 15-D2004/F 15-D3004/J 15-D3004/F 15-D4004/J Pan only 15-D2003/J 15-D2003/F 15-D3003/J 15-D3003/F 15-D4003/J Cover only 15-D2002/J 15-D2002/F 15-D3002/J 15-D3002/F 15-D4002/J Frame only 15-D2001/J 15-D2001/F 15-D3001/J 15-D3001/F 15-D4001/J Receiver/Separator 15-D2000/J 15-D2000/F 15-D3000/J 15-D3000/F 15-D4000/J * Aperture conforming alo to BS, NF, DIN, UNE, UNI tandard. See introduction (1) See next page 30

16 Drying, weighing and grading Sample grading Teting ieve ISO * Tet ieve of perforated metal plate The new European tandard alo pecify that: Sieve with aperture ize of 4 mm and above hall be perforated plate quare hole tet ieve (1). Below that ize they hall be woven wire tet ieve. - Each ieve i upplied complete with certificate of conformity Tet ieve of perforated metal plate Nominal Code Code Code Code Code aperture 200 mm dia. 250 mm dia. 300 mm dia. 315 mm dia. 450 mm dia. 4 mm 15-D2550/J 15-D2550/F 15-D3550/J 15-D3550/F 15-D4550/J 4.75 mm 15-D2545/J 15-D2545/F 15-D3545/J 15-D3545/F 15-D4545/J 5 mm 15-D2540/J 15-D2540/F 15-D3540/J 15-D3540/F 15-D4540/J 5.6 mm 15-D2535/J 15-D2535/F 15-D3535/J 15-D3535/F 15-D4535/J 6.3 mm 15-D2530/J 15-D2530/F 15-D3530/J 15-D3530/F 15-D4530/J 6.7 mm 15-D2525/J 15-D2525/F 15-D3525/J 15-D3525/F 15-D4525/J 7.1 mm 15-D2520/J 15-D2520/F 15-D3520/J 15-D3520/F 15-D4520/J 8 mm 15-D2515/J 15-D2515/F 15-D3515/J 15-D3515/F 15-D4515/J 9 mm 15-D2514/J 15-D2514/F 15-D3514/J 15-D3514/F 15-D4514/J 9.5 mm 15-D2510/J 15-D2510/F 15-D3510/J 15-D3510/F 15-D4510/J 10 mm 15-D2505/J 15-D2505/F 15-D3505/J 15-D3505/F 15-D4505/J 11.2 mm 15-D2500/J 15-D2500/F 15-D3500/J 15-D3500/F 15-D4500/J 12.5 mm 15-D2495/J 15-D2495/F 15-D3495/J 15-D3495/F 15-D4495/J 13.2 mm 15-D2490/J 15-D2490/F 15-D3490/J 15-D3490/F 15-D4490/J 14 mm 15-D2485/J 15-D2485/F 15-D3485/J 15-D3485/F 15-D4485/J 16 mm 15-D2480/J 15-D2480/F 15-D3480/J 15-D3480/F 15-D4480/J 18 mm* 15-D2479/J 15-D2479/F 15-D3479/J 15-D3479/F 15-D4479/J 19 mm 15-D2475/J 15-D2475/F 15-D3475/J 15-D3475/F 15-D4475/J 20 mm 15-D2470/J 15-D2470/F 15-D3470/J 15-D3470/F 15-D4470/J 22.4 mm 15-D2465/J 15-D2465/F 15-D3465/J 15-D3465/F 15-D4465/J 25 mm 15-D2460/J 15-D2460/F 15-D3460/J 15-D3460/F 15-D4460/J 26.5 mm 15-D2455/J 15-D2455/F 15-D3455/J 15-D3455/F 15-D4455/J 28 mm 15-D2450/J 15-D2450/F 15-D3450/J 15-D3450/F 15-D4450/J 31.5 mm 15-D2445/J 15-D2445/F 15-D3445/J 15-D3445/F 15-D4445/J 37.5 mm 15-D2440/J 15-D2440/F 15-D3440/J 15-D3440/F 15-D4440/J 40 mm 15-D2442/J 15-D2442/F 15-D3442/J 15-D3442/F 15-D4442/J 45 mm 15-D2435/J 15-D2435/F 15-D3435/J 15-D3435/F 15-D4435/J 50 mm 15-D2430/J 15-D2430/F 15-D3430/J 15-D3430/F 15-D4430/J 53 mm 15-D2425/J 15-D2425/F 15-D3425/J 15-D3425/F 15-D4425/J 56 mm 15-D2426/J 15-D2426/F 15-D3426/J 15-D3426/F 15-D4426/J 63 mm 15-D2420/J 15-D2420/F 15-D3420/J 15-D3420/F 15-D4420/J 75 mm 15-D2415/J 15-D2415/F 15-D3415/J 15-D3415/F 15-D4415/J 80 mm 15-D2416/J 15-D2416/F 15-D3416/J 15-D3416/F 15-D4416/J 90 mm 15-D2410/J 15-D2410/F 15-D3410/J 15-D3410/F 15-D4410/J 100 mm 15-D2402/J 15-D2402/F 15-D3402/J 15-D3402/F 15-D4402/J 106 mm 15-D2405/J 15-D2405/F 15-D3405/J 15-D3405/F 15-D4405/J 125 mm 15-D2400/J 15-D2400/F 15-D3400/J 15-D3400/F 15-D4400/J Pan and cover 15-D2004/J 15-D2004/F 15-D3004/J 15-D3004/F 15-D4004/J Pan only 15-D2003/J 15-D2003/F 15-D3003/J 15-D3003/F 15-D4003/J Cover only 15-D2002/J 15-D2002/F 15-D3002/J 15-D3002/F 15-D4002/J Frame only 15-D2001/J 15-D2001/F 15-D3001/J 15-D3001/F 15-D4001/J Receiver/Separator 15-D2000/J 15-D2000/F 15-D3000/J 15-D3000/F 15-D4000/J * Aperture conforming alo to BS and DIN tandard. See introduction 31

17 15 Drying, weighing and grading Sample grading... Teting ieve ASTM E11 US Sieve erie Woven wire cloth ieve (coare) Aperture Code Code mm/in. 8 dia. 12 dia. 100 mm 4 in. 15-D0100/2J 15-D0100/3J 90 mm 3H in. 15-D0101/2J 15-D0101/3J 75 mm 3 in. 15-D0102/2J 15-D0102/3J 63 mm 2H in. 15-D0103/2J 15-D0103/3J 53 mm 2.12 in. 15-D0104/2J 15-D0104/3J 50 mm 2 in. 15-D0105/2J 15-D0105/3J 45 mm 1I in. 15-D0106/2J 15-D0106/3J 37.5 mm 1H in. 15-D0107/2J 15-D0107/3J 31.5 mm 1¼ in. 15-D0108/2J 15-D0108/3J 26.5 mm 1.06 in. 15-D0109/2J 15-D0109/3J 25.0 mm 1 in. 15-D0110/2J 15-D0110/3J 22.4 mm 7/8 in. 15-D0111/2J 15-D0111/3J 19.0 mm 3/4 in. 15-D0112/2J 15-D0112/3J 16.0 mm 5/8 in. 15-D0113/2J 15-D0113/3J 13.2 mm.530 in. 15-D0114/2J 15-D0114/3J 12.5 mm H in. 15-D0115/2J 15-D0115/3J 11.2 mm 7/16 in. 15-D0116/2J 15-D0116/3J 9.5 mm 3/8 in. 15-D0117/2J 15-D0117/3J 8.0 mm 5/16 in. 15-D0118/2J 15-D0118/3J 6.7 mm.265 in. 15-D0119/2J 15-D0119/3J 6.3 mm 1/4 in. 15-D0120/2J 15-D0120/3J 5.6 mm No. 3H 15-D0121/2J 15-D0121/3J 4.75 mm No D0122/2J 15-D0122/3J 4.00 mm No D0123/2J 15-D0123/3J ASTM E11 US Sieve erie Woven wire cloth ieve (fine) Aperture Code Code mm/in. 8 dia. 12 dia mm No D0124/2J 15-D0124/3J 2.8 mm No D0125/2J 15-D0125/3J 2.36 mm No D0126/2J 15-D0126/3J 2 mm No D0127/2J 15-D0127/3J 1.7 mm No D0128/2J 15-D0128/3J 1.4 mm No D0129/2J 15-D0129/3J 1.18 mm No D0130/2J 15-D0130/3J 1 mm No D0131/2J 15-D0131/3J 850 µm No D0132/2J 15-D0132/3J 710 µm No D0133/2J 15-D0133/3J 600 µm No D0134/2J 15-D0134/3J 500 µm No D0135/2J 15-D0135/3J 425 µm No D0136/2J 15-D0136/3J 355 µm No D0137/2J 15-D0137/3J 300 µm No D0138/2J 15-D0138/3J 250 µm No D0139/2J 15-D0139/3J 212 µm No D0140/2J 15-D0140/3J 180 µm No D0141/2J 15-D0141/3J 150 µm No D0142/2J 15-D0142/3J 125 µm No D0143/2J 15-D0143/3J 106 µm No D0144/2J 15-D0144/3J 90 µm No D0145/2J 15-D0145/3J 75 µm No D0146/2J 15-D0146/3J 63 µm No D0147/2J 15-D0147/3J 53 µm No D0148/2J 15-D0148/3J 45 µm No D0149/2J 15-D0149/3J 38 µm No D0150/2J 15-D0150/3J Pan and cover 15-D0151/2J 15-D0151/3J Pan only 15-D0152/2J 15-D0152/3J Cover only 15-D0153/2J 15-D0153/3J Frame only 15-D0154/2J 15-D0154/3J Receiver/Separator 15-D0155/2J 15-D0155/3J Woven wire cloth ieve (coare) Woven wire cloth ieve (fine) 32

18 Drying, weighing and grading Sample grading Sieve haker Sieve haker for ieve up to 315* mm (12 ) dia. Introduction We propoe three different model which differ one to another, for the ieving motion: - Vertical only for the 15-D0407/B model - Vertical and rotational with continuou or intermittent operation and adjutable vibration intenity for the 15-D0409 model - Vertical, orbital and jarring motion for the electromechanical model 15-D0411. The 15-D0407/B can alo be ued, removing the upper plate, a a vibrating table for one concrete pecimen. Electromagnetic digital ieve haker M 15-D0409 Electromagnetic digital ieve haker for ieve up to 315 mm dia. 230 V, Hz, 1 ph. EN 932-5, ISO Thi new and advanced ieve haker fully atify the tandard, which require that the tet material on any given ieve progree over the urface of the ieve when it i agitated. Conforming to ISO it can hold round ieve up to 315 mm dia. The main feature of thi haker conit in the multiple vibration motion: - Vertical by the electromagnet - Rotational by the three laminated upenion pring in both way. The haker i provided with a microproceor digital control ytem with diplay unit for the following function: - Timer 0-99 min by 1 min tep or continuou operation - Continuou or intermittent operation (very important for critical product to intenify the ieving action reducing the duration of operation) - Adjutable vibration intenity The haker i alo fitted with antivibration damper, which totally iolate the machine from work urface reducing the noie level. Specification Sieve diameter and capacity: 200, 203, 250, 300, and 315 mm dia. Up to twelve 200 mm dia. and nine mm dia. ieve plu pan and cover Power: 400 W approx. B Overall dimenion (wxdxh): 420x405x1100 mm A Weight approx.: 40 kg Sieve haker, ELECTROMAGNETIC M 15-D0407/B Electromagnetic ieve haker for ieve up to 315 mm dia. 230 V, Hz, 1 ph. 15-D0407/B General decription The vertical ieving motion i provided by a very effective electromagnetic unit, which i et to obtain the bet reult with and and aggregate. Complete with timer. Main feature - Multiple ieving motion - Microproceor digital control ytem - Continuou or intermittent operation - Adjutable vibration intenity - Timer - Antivibration damper ytem - Fat clamping 15-D0409 Specification Sieve capacity: up to twelve, 200 mm(8 ) and up to eight; 300/315 mm dia. ieve plu pan and cover Power: 400 W approx. B Dimenion: 496x406x946 mm A Weight approx: 30 kg NOISE REDUCTION CABINET 15-D0400/CAB Noie reduction cabinet for Sieve Shaker. General decription Ideal for ue in laboratory and eential to fullfill CE precription. The cabinet i manufactured from heet teel lined internally with oundprofing material. It i uitable for ue with the following haker. 15-D0407/B,15-D0409,15-D0411 Overall dimenion: 770x722x1415 mm (lxdxh) Weight: 60kg approx 33

19 15 Drying, weighing and grading Sample grading... Sieve haker Triple motion Sieve haker motor operated M 15-D0411 Motoried ieve haker for ieve up to 315 mm diameter. 230 V, 50 Hz, 1 ph. M 15-D0411/Z Motoried ieve haker for ieve up to 315 mm diameter. 110 V, 60 Hz, 1 ph. General decription and pecification An adaptable ieve haker deigned for ue where large batch ize, large particle ize or varied ieve ize are required. Thi ieve haker feature a unique combination of jarring and orbital action, allowing the mot poitive ieving and grading. Upper and lower crohead are adjutable to receive and firmly lock the different ize of ieve. Include a 30 minute timer and a continuou-top-timer operation witch. - Sieve capacity: Ten mm (8 ) ieve plu pan and cover Eight 250 mm ieve plu pan and cover Six 300 mm (12 ) or 315 mm ieve plu pan and cover - Max. ample weight: from 1500 to 4500 g, depending on ieve ize - Orbital action: 327 ocillation per minute approx. - Jarring action: 40 vertical blow per minute - Power: 250 W B Overall dimenion: 540x372x1013 mm A Weight approx.: Net 75 kg - Vertical two way jarring action - Orbital action - Quick releae clamp - Poitive and efficient ieving motion - Sieve timer 15-D0411 with ieve Acceorie and pare Wet ieving attachment Ued for wahing fine material through the ieve without any lo of ample. Applicable to all ieve haker. It conit of: Cover combining the locking plate and pray nozzle / Stainle teel pan with pout drainage plate / Location plate / Watertight eal. 15-D0400/A1 Wet wahing ieve attachment for 200 mm dia. ieve. Weight 2.5 kg approx. 15-D0400/A2 Wet wahing ieve attachment for 203 mm dia. (8 ) ieve. Weight 2.5 kg approx. 15-D0400/A3 Wet wahing ieve attachment for 300 mm dia. ieve. Weight 5 kg approx. high capacity creen haker M 15-D0420/A High capacity mechanical creen haker. 230 V, 50 Hz, 1 ph. M 15-D0420/AZ Same a above but 110 V, 60 Hz, 1 ph. Ideal for izing large quantitie of cruhed tone, and, gravel, lag, coal, coke, ore, pellet and imilar material. The creen haker ha a capacity of about 30 litre (1 ft 3 ) of ample. Enabling from two to even eparation imultaneouly. The vibrating unit conit of interlocking pace, which upport and eparate the creen tray. An equal clearance among tray allow an independent removal of each tray. Hold ix creen tray and one dutpan. The creen haker i upplied complete with one dutpan tray. Screen tray have to be ordered eparately Tray dimenion: 457x660x75 mm Power: 250 W B Dimenion: 584x787x850 mm A Weight approx.: net 170 kg Acceorie and pare 15-D0420/A1 Dut cover 15-D0428/9 Dutpan tray 15-D0428/10 Tray only (without meh) 15-D0400/A1, 15-D0400/A2 34

20 Drying, weighing and grading Sample grading High capacity creen haker Screen tray ASTM E11* Woven wire cloth type 15-D0425 Coare erie Code Sieve Alternaop. mm tive 15-D0425/ D0425/ H 15-D0425/ D0425/ H 15-D0425/ D0425/ ( ) 2 15-D0425/ I 15-D0425/ ( ) 1H 15-D0425/ I 15-D0425/ D0425/ ( ) 1 15-D0425/ /8 15-D0425/ ( ) 3/4 15-D0425/ /8 15-D0425/ D0425/ ( ) 1/2 15-D0425/ /16 15-D0425/ /8 15-D0425/ /16 15-D0425/ D0425/ /4 15-D0425/ No.3H 15-D0425/ No. 4 ( ) Standard et recommended by ASTM Intermediate erie Code Sieve Alternaop. tive mm 15-D0426/ No D0426/ No D0426/ No D0426/ No D0426/ No D0426/ No D0426/ No. 14 Fine erie Code Sieve Alternaop. tive mm 15-D0427/ No D0427/ No D0427/ No D0427/ No D0427/ No D0427/ No D0427/ No D0427/ No D0427/ No D0427/ No D0427/ No D0427/ No D0427/ No. 100 Fine erie with reinforcement meh Code Sieve Alternaop. mm tive 15-D0428/ No D0428/ No D0428/ No D0428/ No. 200 ISO Screen tray Woven wire cloth Code Nominal aperture 15-D0427/E02 80 µm 15-D0427/E µm 15-D0427/E µm 15-D0427/E µm 15-D0427/E µm 15-D0427/E µm 15-D0427/E µm 15-D0427/E µm 15-D0427/E µm 15-D0427/E µm 15-D0427/E mm 15-D0427/E mm 15-D0427/E mm ISO Screen tray of perforated metal plate Code 15-D0425/E D0425/E D0425/E D0425/E D0425/E D0425/E D0425/E D0425/E D0425/E D0425/E D0425/E D0425/E D0425/E D0425/E D0425/E D0425/E D0425/E33 80 Nominal aperture mm - Can eparate up to 30 dm 3 (1 ft 3 ) of aggregate (65 kg. approx) - Fine meh tray reinforced 15-D0420/A with tray 15-D0420/A fitted with 15-D0420/A1 Dut cover 35

21 15 Drying, weighing and grading Sample grading... Sieve bruhe/ Wet wahing/ Ultraonic cleaning Determination of particle Flakine index EN Bar ieve ( Grid) Ued to determine the flakine index of the aggregate. Aluminium frame and teel bar. (For more information ee page189) Wet wahing ieve Ued for wet teting of fine granular material. Two model available. Opening mm. Weight approx. 1 kg net. ASTM E11 M 15-D0160 Wet wahing ieve 8 dia. by 4 high M 15-D0160/1 Wet wahing ieve 200 mm dia. by 100 mm high 15-D0405 Ultraonic cleaning apparatu Bar ieve Sieve Sieve bruhe BRUSHES M 86-D1672 Soft hair bruh 3 mm dia. BS 812 M 86-D1673/G1 Double ended, bra and nylon britle M 86-D1675 Britle round bruh 30 mm dia. M 86-D1685 Nylon ieve bruh 33 mm dia. M 86-D1685/G Double ended nylon ieve bruh 15-D0160 Specification of ultraonic clearying apparatu Ued to achieve a thorough cleaning of tet ieve without cauing ditortion. Thi apparatu i particularly uitable for fine meh ieve which could be damaged uing ordinary cleaning method (bruhe or hock on frame). Complete with timer, ieve rack and lid. Two model available uitable for ieve up to mm dia. and up to 400 mm dia. Model Power Inner tank Voltage Weight M code W dimenion mm approx. (dia. x h) kg 15-D x V, Hz, 1 ph D0405/B x V, Hz, 1 ph. 10 Acceorie 15-D0405/3 Cleaning liquid 5l can. 86-D1685, 86-D1675, 86-D1672, 86-D1673/G1, 86-D1685/G 36

22 Drying, weighing and grading Sample grading Riffle boxe ( ample plitter) 15 Riffle boxe (ample plitter) EN 933-3, BS 812:1, 1377:2, 1924:1 / ASTM C702 Code Max. ize Slot width No. of lot Capacity Weight ample (mm) (mm) (dm 3 ) (kg) 15-D D0438/A D0438/B D0438/C D0438/D D0438/E D0438/F D0438/G D0438/H Each riffle box i upplied with 3 metal pan Large capacity ample plitter M 15-D0430 Large capacity ample plitter. UNI, NF and CNR model Specification For aggregate up to 150 mm ize Adjutable opening from: 12.5 mm with 12.5 mm increment Clam hell hopper 26 dm 3 capacity Complete with two pan B Dimenion: Overall height: 991 mm Hopper ize: 737 mm long x 483 mm wide A Weight approx.: 50 kg Spare part 15-D0430/1 Spare material pan. Weight 2.3 kg 15-D0438 D0438/H Mini ample plitter M 15-D0431 Mini ample plitter No. 16x5 mm chute. Stainle teel. Weight 1.4 kg approx. 15-D0430 Acceorie 86-D1180/1 Soil mortar 16-D1179/A Rubber headed petle 15-D0439 Quartering canva ASTM C702. Ued to reduce field ample of aggregate to teting ize. Size 2x2 m 15-D D1179/A with 86-D1180/1 37

23 Soil Claification INTRODUCTION In all ection of civil engineering and particularly in oil mechanic, the engineer during the deign tage mut enure that the analyi of oil propertie relate directly to the relevant foundation or tructure. Uing procedure involving extracting, examining and teting repreentative ample the engineer can compute a model very cloe to the real ituation. In recent year we have een a ignificant contribution to experimental analyi reulting from more ophiticated teting procedure, up dating of many International Standard, and publication of good teting manual and procedure. 38

24 Soil Claification Content Field claification, ampling, and preparation Soil ampling - Auger and ampler Water level indicator...41 Pocket penetrometer and vane teter...42 Field inpection kit...43 Dynamic penetrometer...44 Extruder...46 Soil lathe and trimmer...47 Sample mixer and oil cutter...48 Moiture content Moiture determination balance...49 Deiccator...49 Univeral carbide meter...49 Speedy moiture teter...50 Laboratory Claification Specific gravity...51 Liquid, Platic and hrinkage limit Sedimentation / Hydrometer and pipette method Chemical Tet ph Paper and meter...57 Chloride and Sulphate content determination ph Meter...59 Water tet kit...59 Soil colour chart

25 16 Soil Claification Field claification, ampling, and preparation... Soil ampling Soil ampling - Hand auger and ampler The item we propoe are ued to obtain ample that adequately repreent each urface material that i ignificant to the project deign and contruction. ASTM D420, D1452 / AASHTO T86, T202 / CNR a. VI n. 25 Ued for general exploration in oil invetigation. Made of pecial plated teel. The T handle with 1 m rod ha to be ordered eparately. Code Decription Weight approx. (kg) 16-T0005/A Hand auger head 80 mm dia T0006/A Hand auger head 100 mm dia T0007/A Hand auger head 150 mm dia T0008/A Spiral oil auger head 25 mm dia T0008/B 16-T0005/A, 16-T0006/A, 16-T0007/A, 16-T0008/B, 16-T0008/C, 16-T0008/A, 16-T0010/6 Dutch oil auger head, Edelman model, 70 mm dia., for oft fine oil 2 16-T0008/C Gravel auger head 150 mm dia T0010/6 Stainle teel ample tube dia. 38x230 mm 0.3 Acceorie 16-T0005/1 T handle 16-T0005/2 Extenion rod 1 m length 16-T0005/3 Chiel M 16-T0010/G Soil propecting kit It comprie all the mot popular auger and ampler houed in a practical carrying cae. It conit of: 16-T0005/A Hand auger head 80 mm dia. 16-T0006/A Hand auger head 100 mm dia. 16-T0007/A Hand auger head 150 mm dia. 16-T0008/A Spiral oil auger head 25 mm dia. 16-T0008/B Dutch oil auger head, Edelman model 70 mm dia. 16-T0008/C Gravel auger head 150 mm dia. 16-T0010/6 Stainle teel ample tube dia. 38x230 mm (No. 6 piece) 16-T0010/7 Platic end cap for ample tube dia. 38x230 mm (No. 12 piece) 16-T0010/3 Jarring link 16-T0010/8 Hand extruder for ample tube dia. 38x230 mm 16-T0005/2 Extenion rod, 1 m long (No. 6 piece) 16-T0005/1 T handle Stillon 16-T0005/5 wrenche (No. 2 piece) A Total weight: 50 kg approx. M 16-T0010 Sampling equipment to take unditurbed oil ample 38 mm dia. 16-T0010 Ued to take unditurbed oil ample in oft and fine oil. The apparatu comprie T- handle, Extenion rod, Jarring link, Stainle teel ample tube dia. 38x230 mm length. The ample i obtained by percuion, lifting all the upper aembly which lide inide the jarring link and force the ample tube into the oil. A Weight approx.: 7 kg Acceorie 16-T0010/7 Platic end cap for 38 mm dia. ample tube 16-T0010/8 Hand extruder for 38 mm dia. pecimen. Weight 1 kg 16-T0010/G 16-T0010/8 with 16-T0010/6 40

26 Soil Claification Field claification, ampling, and preparation 16 Soil ampling Auger power head M 16-T0009/C Auger power head, 1.5 kw M 16-T0009/D Auger power head, complete with revering gear. 4.2 kw Ued in conjunction with ampling tube to obtain diturbed or unditurbed ample of oil. The auger are not included and have to be ordered eparately. (See acceorie) Drilling hole dia.: from 60 to 200 mm for model 16-T0009/C and from 100 to 500 mm for model 16-T0009/D A Weight approx.: 8.5 kg for model 16-T0009/C and 22.5 kg for model 16-T0009/D Acceorie 16-T0009/C1 Auger 60 mm dia. x 16-T0009/D 16-T0009/C2 Auger 80 mm dia. x Water level indicator 16-T0009/C3 Auger 100 mm dia. M 16-E0096 Water level indicator, 50 m cable 1000 mm 1000 mm x 1000 mm 16-T0009/C4 Auger 150 mm dia. x 1000 mm 16-T0009/C5 Auger 200 mm dia. x 1000 mm 16-T0009/C10 Extenion rod for above 1000 mm long. M 16-E0096/A Water level indicator, 100 m cable M 16-E0096/B Water level indicator, 200 m cable General decription and pecification Ued for determination of the water level in borehole, well and other open underground tructure. Drum mounted, with an ON/OFF indicator and audio ignal when probe touche water. The ening portion of the probe ha a tainle teel tip with platic hielding to prevent fale reading. Probe diameter of 10 mm allow an eay paage through 1/ tubing. Cable i marked at 1 cm interval. 16-E Battery operated: 9 V DC A Weight approx.: 6 kg 16-T0009/C 41

27 16 Field claification, ampling, and preparation... Pocket penetromer/ Hand vane teter Soil Claification Pocket penetrometer Dial Penetrometer They are offered in three different verion a hown in the Table. The dial ha a max. value holding ytem with 0 etting by puh button. Specification Dial diameter: 60 mm Peak hold feature 16-T T0160, 16- T0162 Code Range kgf/cm2 Plunger() dia. mm 16-T T T0161 (1) (1) Ued for evaluating the angle of internal friction ϕ of andy oil and the coheion c in clay oil. Dual cale: 0-6 kgf/cm 2 for 6.35 mm dia. plunger and 0-11 kg. Standard pocket Penetrometer M 16-T0171 Pocket penetrometer range 0-5 kgf/cm 2 Deigned for making field claification of coheive oil in term of conitency, hear trength and approximate unconfined compreive trength. B Dimenion: 20 mm dia. x 173 mm length A Weight approx.: 0.5 kg Specification All tainle teel contruction tip diameter (interchangeable): 4.5 mm for very hard oil; 6.35 mm for medium and oft oil; 8.98 for oft oil. Supplied complete with platic cae. Meauring range: 0 to 10 kgf/cm 2 B Dimenion (aembled): 210 mm length x 20 mm dia. approx. A Weight approx.: 0.5 kg one of two vane. A max. reading pointer make reading eay. The teter i upplied complete with one 19 mm (range kpa) and one 33 mm (range 0-28 kpa) vane. Extenion rod are available eparately a acceorie. A carrying cae i alo upplied. A Weight approx.: 2.5 kg Acceorie 16-T0174/B1 Extenion rod 300 mm long 16-T0174/B2 Extenion rod 1000 mm long 16-T0171 M 16-T0163 Heavy duty pocket penetrometer Ued to obtain quickly and eaily an approximate meaure of the hear trength of coheive and emicoheive oil. The pecial feature of thi model i the deign of the penetration rod, which allow a relatively deep penetration into the oil (up to 6 cm) thu reducing error and uncertaintie typical of hallow meaure, which are often affected by remoulding, drying, etc.three different ize of penetration tip are available: the mall one for hard oil, the medium one for oft and medium oil, and the large one for oft oil. 16-T0163 Pocket hand vane teter M 16-T0174/B Hand vane teter ASTM D2573 A imple and portable intrument for ue by the geotechnical engineer to determine in-itu hear trength of coheive oil. The device conit of a torque head with direct reading cale into which i fitted 16-T0174/B 42

28 Soil Claification Field claification, ampling, and preparation 16 Hand vane teter/ Field inpection kit Field inpection kit M 16-T0175/A Pocket hear vane device Can be ued either in the field or in the laboratory, at the end of ample tube, etc. Supplied complete with: 16-T0174 M 16-T0174 Field inpection pocket vane teter Standard 25 mm dia. vane, range 0-10 N/cm2 Senitive vane adaptor, range 0-2 N/cm2 High capacity vane adaptor, range 0-25 N/cm2 Platic container Intruction manual. ASTM D2573 M 16-T0174/A Field inpection teting kit with cae Ideal for geotechnician, geologit and agronomit. It conit of the 16-T0163 Pocket penetrometer and of the 16-T0174 Field inpection pocket vane teter. The intrument i contained in a practical carrying cae. B Cae dimenion: 240x210x50 mm A Weight approx.: 1.8 kg ASTM D2573 Thi teter, deigned to meaure the undrained hear trength (CU) of coheive oil, conit of a cylindrical body with a torional pring and three interchangeable vane of different ize ued depending upon the expected trength of the oil. The vane have the following dimenion: - mall ize 32x16 mm (height x dia.) - medium ize 40x20 mm (height x dia.) - large ize 50.8x25.4 mm (height x dia.). The height/diameter ratio of all vane i 2. During operation the vane i driven for 5-6 cm into the oil and then turned with the handle. Deep meaure (i.e. on the top of unditurbed ample) can be obtained uing the extenion rod. Specification All tainle teel contruction Vane dimenion (height x dia.): 32x16 40x x25.4 mm Meauring range: 0 to 240 kpa (O-24 N/cm2) Torque value: 5 N m Extenion rod: included B Overall dimenion (aembled): 310x105 mm 16-T0175/A 16-T0174/A Spare part 16-T0175/1 Senitive vane adaptor 0-2 N/cm2 16-T0175/2 High capacity vane adaptor 0-25 N/cm2 16-T0175/3 Standard vane 0-10 N/cm2 The teter i upplied in a platic cae. Acceorie 16-T0174/1 Extenion rod 500 mm long 43

29 16 Soil Claification Field claification, ampling, and preparation... Dynamic penetrometer Dynamic penetrometer BS 1377:9 M 16-T0012/A TRL* Dynamic Cone Penetrometer (DCP) The TRL DCP (Dynamic Cone Penetrometer) i an intrument deigned for the rapid initu meaurement of the tructural propertie of exiting road pavement contructed with unbound material. Continuou meaurement can be made down to a depth of approximately 850 mm or when extenion haft are ued to a recommended maximum depth of 2 m. Where pavement layer have different trength the boundarie can be identified and the thickne of the layer determined. Correlation have been etablihed in earlier work (Van Vuuren 1969, Kleyn and Van Heerden 1983, Smith and Pratt 1983) between meaurement with the DCP and CBR (California Bearing Ratio) o that reult can be interpreted and compared with CBR pecification for pavement deign. A typical tet take only a few minute and therefore the intrument provide a very efficient method of obtaining information that would normally require the digging of tet-pit. *TRL-UK Tranport Reearch Laboratory General decription and pecification The deign of the DCP i imilar to that decribed by Kleyn, Maree and Savage (1982) in that it ue an 8 kg weight dropping through a height of 575 mm and a 60 cone having a diameter of 20 mm. It i upplied with two mm AF Spanner, Tommy Bar, 3 mm AF Hex Wrench and a bottle of adheive ued for ecuring handle/top rod and bottom rod/cone joint. 16-T0012/A 60ϒ 575 DROP 10 Ø T0012/1 Spare cone for 16-T0012/A 16-T0012/2 Upper extenion haft 16-T0012/3 Lower extenion haft Spare part 16-T0012/4 Extenion rod et 16-T0012/5 Spare anvil coupling 16-T0012/6 Handle guard 16-T0012/7 Handle 16-T0012/8 Hammer haft 16-T0012/9 Standard haft B Cae dimenion: 1200x350x200 mm approx. A Weight approx.: 30 kg 44

30 Soil Claification Field claification, ampling, and preparation Dynamic penetrometer (continued) 16 Dynamic penetrometer DIN 4094 M 16-T0013 Lightweight dynamic penetrometer. Hand operated Penetrometer are ued to etablih the thickne of different tratification when invetigating the uitability of a ite for bridge, road and other contruction work. In general if the ground i not too compact, penetration tet with the lightweight penetrometer can be carried out to depth of about 8 to 12 m. Thi apparatu i upplied complete with No. 11 ounding rod, No. 1 grooved rod, No. 2 drive point 90 : 500 and 1000 mm 2, lifting device for ounding rod, coupling and carrying cae. Specification Weight of rammer: 10 kg Rammer fall: 50 cm B Carrying cae dimenion: 1160x370x220 mm A Weight approx.: 71 kg 16-T0013 M 16-T0013/E Motor operated dynamic penetrometer, 20/30 kg drop weight The apparatu comprie a 4 troke engine which drive, through a flexible haft, the lifting mechanim, a 20 kg weight, a 10 kg upplementary weight, 10 rod, 5 cone each of 500 and 1000 mm 2 ize, and rod lifting device. The heaviet part of thi apparatu i 20 kg dropping weight o it i very imple to ue and eay to carry on ite. The apparatu atify DIN 4094 tandard for medium weight tet apparatu 30 kg ma x 20 cm drop height. Supplied complete with carrying cae for ounding rod. Spare part and acceorie for both 16-T0013 and 16-T0013/E penetrometer 16-T0013/8 Drive conical point, 500 mm 2 area, 25.2 mm dia., 90 angle (for 16-T0013 model) 16-T0013/9 Drive conical point, 1000 mm 2 area, 35.6 mm dia., 90 angle (for 16-T0013 model) 16-T0013/10 Spare expendable conical point 500 mm 2 area, 25.2 mm dia., 90 angle 16-T0013/11 Spare expendable conical point 1000 mm 2 area, 35.6 mm dia., 90 angle 16-T0013/L Rod lifting device 16-T0013/4 Sounding rod 22 mm dia. 16-T0013/6 Grooved rod to take diturbed ample 16-T0013/7 Threaded nipple to connect ounding rod 16-T0013/E 16-T0013 aembled Specification 1.9 kw 4 troke engine Driving rate: up to 45 blow/min Fall height: 20 cm Drop weight: 20 or kg A Total net weight: 70 kg approx. (without ounding rod and acceorie) 45

31 16 Soil Claification Field claification, ampling, and preparation... Extruding oil ample / Melting pot Extruder ASTM D698, D1587, D1883 BS 598:107, 1377:4, 1924:2 M 16-T0082/A Hand operated univeral extruder General decription Thi apparatu can accommodate tandard U4 ample tube and a range of adaptor to extrude oil ample 38, 101 and 151 mm dia. It can alo be ued to remove Marhall, Proctor and CBR pecimen. Appropriate acceorie and adaptor are lited below, and mut be ordered eparately. Specification Max. load capacity: 60 kn (6000 kgf) Ram travel: 480 mm B Dimenion: 1140x300x370 mm A Weight approx.: 50 kg (without acceorie) 16-T0082/1 16-T0082/A16 Extenion fitted on the 16-T0082/1 Adaptor for 16-T0082/A extruder 16-T0082/A Code For extruding a oil ample Ø mm 16-T0082/ and 152.4, total length 280 mm approx. 16-T0082/ T0082/4 Frame and adaptor only for extruding three 38 mm dia. tube from a U4 tube 16-T0082/5 106 (for extruding a oil ample from a U4 tube) 16-T0082/A16 Extenion for extruding up to 450 mm long ample M 16-T0080 Univeral extruder Mainly ued to remove 4 and 6 ample from Marhall, Proctor and CBR mould. Capacity: 30 kn Ram travel: 197 mm (ram) + 68 mm crew A Weight approx.: 25 kg 16-T T0010/8 with 16-T0010/6 M 16-T0010/8 Hand extruder for 38 mm dia. ample General decription Screw type, uable with the 16-T0010/6 tainle teel, 38 mm i.d., 230 mm long ample tube. A Weight approx.: 1 kg Melting pot M 10-D1403 Melting pot. 230 V, Hz, 1 ph. Ued to melt wax to eal the oil ample and other material. The temperature i et and maintained at the deired value. Adjutable thermotat and pilot lamp fully iolated conforming to CE requirement. Supplied complete with cover. Specification Capacity: 5 l approx. Temperature range: +30 / +150 C Power: 700 W B Dimenion: 200 mm internal dia. x 160 mm, 285 mm external dia. x 275 mm A Weight approx.: 2.7 kg Acceorie 86-D0805 Paraffin wax. 1 kg 55-C0121/5 Ladle 10-D

32 Soil Claification Field claification, ampling, and preparation Extruding oil ample (continued) / Trimming and reducing ample 16 Extruder (continued) M 16-T0083/A Motoried hydraulic extruder. 230 V, 50 Hz, 1 ph.* General decription Sampling tube are held in place by an adjutable V hape bearing which can extrude either in the vertical or horizontal poition. Both the hydraulic cylinder aembly and the receiving table can be eaily lowered along ide the machine to ave pace when not in ue. The machine i upplied without tube adaptor which have to be ordered eparately. See acceorie. * Other voltage available on requet Specification Max. load: 60 kn (6000 kgf) Max. ram troke: 900 mm Max. external dia. of ample tube: 160 mm B Overall dimenion - horizontal working poition (lxwxh): 2730x409x1180 mm - vertical working poition (lxwxh): 1025x409x1080 mm (without acceorie) A Weight approx.: net 160 kg Soil lathe and trimmer Sample reduction M 16-T0028 Soil lathe/trimmer and extruder for oil ample from 35 mm to 100 mm dia General decription Soil ample from 35 mm to 100 mm dia. can be trimmed and extruded with thi imple device. To reduce ample, an open wire aw i required (model 16-D1689). Specification Specimen lathe: from 35x70 to 100x200 mm Specimen trimming and extruion: from 35x70 to 50x100 mm Vertical daylight: 260 mm B Overall dimenion: 220x300x450 mm A Weight approx.: 15 kg 16-T0028 Sample reduction The following item are ued to gently cruh individual particle for chemical tet. BS 1377:2, 1924:1 / ASTM D421 M 86-D1180/1 Porcelain mortar 125 mm dia. approx. M 16-D1179/A Rubber headed petle 16-D1179/A, 86-D1180/1 Acceorie and adaptor for 16-T0083/A Code For extruding from tube Ø int. Sampling tool 16-T0083/A4 16-T0083/A5 16-T0083/A6 16-T0083/A mm OD Shelby 100 mm OD Shelby 88.9 mm OD Shelby 83 mm OD Shelby Other ize of extruder adaptor available on requet. 16-D1690, 16-D1689, 16-D1691 M 16-D1689 Open wire aw M 16-D1690 Wire aw M 16-D1691 Trimming knife 16-T0083/A 47

33 16 Soil Claification Field claification, ampling, and preparation... Sample preparation: Sample mixer / Soil cutter Sample mixer M 16-L0005/B Laboratory mixer 5 litre capacity complete with whik. 230 V, 50 Hz, 1 ph. M 16-B0072 Laboratory mixer 10 litre capacity complete with whik. 230 V, 50 Hz, 1 ph. mend not to ue with granular material and large aggregate a to avoid eriou damage to the machine. Operating principle The planetary action enure a complete and uniform mixing of the material. Variable peed drive. When lifting the tranparent cover, a afety witch cut off the mixer to prevent accident. Note. Laboratory mixer and acceorie for aphalt mixing are decribed on page B0072 Spare part For 16-L0005/B For 16-B0072 Code Code Spare bowl 65-L0005/2 16-B0072/6 Spare whik 16-L0005/6S 16-B0072/8 Specification Model 65-L0005/2 16-B0072 Capacity (litre) 5 10 Planetary poition from peed (rpm) 50 to 150 rpm Spindle poition from peed (rpm) 180 to 540 rpm Power (W) Overall dimenion (mm) 570x340x x340x585 Weight approx. (kg) Soil cutter Ued to mix oil ample and bituminou mixture for compaction tudie. Model decribed on thi page are with 5 and 10 l capacity. The full range of mixer up to 30 l capacity i detailed in ection 76 including electrically heated model. All model are upplied complete with whik, which i ideal to mix granular material a precribed by BS 598 tandard. Other mixing paddle, beater or hook are available on order but we trongly recomq STANDARD NF P M 16-T0004 Soil cutter 11 l cap. 230 V, 50 Hz, 1 ph. Ideal to digregate clay lump to prepare oil pecimen to be compacted. Made in anodied aluminium and tainle teel. Power (W): 1500 B Dimenion (lxwxh): 680x515x430 mm A Weight approx.: 45 kg 16-L0005/B T0004

34 Soil Claification Moiture content Moiture determination balance / Calcium carbide meter / Deiccator 19 Moiture determination balance Univeral carbide meter Deiccator M 19-D0602/B Moiture determination balance 160 g capacity. 230 V, Hz, 1 ph. Automatically and imultaneouly drie and weigh olid ample for the determination of moiture content. Provide a continuou direct readout for both weight and percentage moiture lo through the entire cycle. Built-in timer 99 minute with 1 minute interval. Specification Capacity/Reolution: 160 g x g Timer: 0 to 99 min B Overall dimenion: 194x340x235 mm A Weight: 11.5 kg approx. - Simultaneou drying and weighing of ample BS T0019 The moiture content can be determined uing Moiture teter baed on the calcium carbide method. The oil ample i introduced in the bottle with the reagent. The water react with calcium carbide and develop a ga preure, which i indicated on the manometer and eaily converted in percentage of moiture. M 86-D1110 Deiccator 200 mm dia. M 86-D1110/A Deiccator 250 mm dia. M 86-D1111 Deiccator 300 mm dia. M 86-D1112 Vacuum type deiccator 200 mm dia. M 86-D1112/A Vacuum type deiccator 250 mm dia. M 86-D1113 Vacuum type deiccator 300 mm dia. All model upplied with perforated plate. 19-D0602/B M 19-T0019 Standard moiture teter General decription Weight on balance: from 3 to 100 g Manometer: 0 to 12% range Set of 4 teel ball Balance: Spring type Standard acceorie: - 20 carbide ampoule - 3 tet ampoule with 1 g of water for checking - 2 pare eal - 1 et of tool - 1 metal carrying cae B Dimenion: 520x340x140 mm A Weight approx.: 8 kg 86-D1113, 86-D1110/A Acceorie 86-D0819 Silica gel (deiccator alt) g 19-D1113/A Deiccator cabinet. Made from tranparent platic for a clear view of content. The unit include adjutable helve. Overall dimenion: 450x480x450 mm. Weight approx.: 30 kg Spare part 19-T0019/1 Spare reagent ampoule. Pack of 100 piece 19-D1113/A 49

35 19 Soil Claification Moiture content... Calcium carbide meter method (continued) / Speedy moiture teter Speedy moiture teter AASHTO T217 A well etablihed portable tet method for the determination of moiture content of oil, and and fine aggregate. The procedure involve the reaction between water and calcium carbide which when mixed together give off a ga. The amount of ga i directly proportional to the amount of water preent in the ample and reult in percentage moiture are taken from a preure gauge. Supplied complete with electronic balance, bruhe and meaure in a platic carrying cae. Thee model are available for moiture determination on 6 and 20 g ample a follow: N O T E When thi item i for export there are limitation on the method of tranportation. For export order the reagent ha to be ordered eparately in pecial pack according to international regulation. Code 47-T0024/A 47-T0023/A Model S 2000 L T0023/A with 47-T0021 Range 0-20% 0-20% Gauge diviion 0.2% 0.2% Standard weight on balance g 6 20 Cae dimenion mm 510x380x x380x200 Weight kg Acceorie 47-T0020/B Speedy calibration kit 47-T0021 Moiture teter reagent. 0.4 kg 47-T0024/A with 47-T T0020/B 47-T0024/A with 47-T T0023/A with 47-T

36 Soil Claification Laboratory claification Specific gravity and particle denity 22 Specific gravity. PyknometerS BS 1377:2, ASTM D854, AASHTO T100 NF P Specific gravity bottle Ued to determine the pecific gravity of fine oil. Gla bottle complete with capillary vent topper. Three ize available: M 86-D1125: 25 ml cap. M 86-D1126: 50 ml cap. M 86-D1127: 100 ml cap. M 86-D2010 Apirator pump General decription and pecification Ued with water current to produce a moderate vacuum. It can be ued on all water preure from approximately 0.7 kg/cm 2. A Weight approx.: 100 g Particle denity Large pyknometer method BS 1377:2 86-D1125, D1126, D D2010 M 86-D1112/A Vacuum deiccator 250 mm dia. complete with plate M 76-B0066/B Digital circulating water bath. 230 V, Hz, 1 ph. M 76-B0066/BZ Digital circulating water bath. 110 V, 60 Hz, 1 ph. Ued for the determination of particle denity, mall pyknometer method conforming to BS 1377:2 and for general laboratory ue Specification Working capacity (litre): 20 Max. water depth (mm): Power (W): 1200 Temperature range ( C) ambient to: +60 Digital reolution: 0.1 C Inide dimenion (mm): 500x300 Outide dimenion (mm): 540x340 Weight approx. (kg): 9.5 Acceorie 76-B0066/1 Cover with cooling coil. For connection to main water 76-B0066/2 Adjutable tray M 48-D0441 Large pyknometer 48-D0441 Ued for the determination of pecific gravity of and and fine aggregate. It conit of a gla jar 1 litre capacity, complete with metal cone and rubber eal. A Weight approx.: 500 g 86-D1112/A, 86-D1110 Acceorie 86-D1113/1 Safety cage for gla vacuum deiccator 86-D0819 Silica gel (Deiccator alt) 76-B0066/1 76-B0066/2 with two 86-D1127 Deicator M 86-D1110 Deiccator 200 mm dia. complete with plate 76-B0066/B 86-D1113/1 51

37 22 Soil Claification Laboratory claification... Specific gravity and particle denity (continued) Particle denity. Ga jar method BS 1377:2 Thi method applie for oil containing up to 10% of particle retained on a 37.5 mm ieve. De-airing ytem M 22-D2050 De-airing tand, 4 place M 22-D0445 End-over-end haker. 230 V, 50 Hz, 1 ph. Ued to rotate two ga jar 22-D1132 at approx. 50 r.p.m. Weight: 20 kg approx. 22-D0445 with 22-D1132 M 22-D1132 Ga jar Gla, 1 litre capacity, upplied complete with rubber bung and gla cover. Weight: 1.3 kg approx. 22-D2050 with pycnometer General decription and pecification A complete ytem for the evacuation of air from volumetric flak during the pecific gravity tet. Complete with all valve, tubing, fitting and manometer capable of ditributing and monitoring the vacuum upply for up to 4 volumetric flak. B Dimenion: 920x590x1880 mm A Weight approx.: 40 kg Acceorie 22-D D2004/A Vacuum pump Rubber 86-D2064 tube for vacuum. 2 m length. 52

38 Soil Claification Laboratory claification Liquid limit: cone method 22 Liquid limit Cone penetrometer method BS 1337:2, NF P CEN ISP/TS ,12 Cone penetrometer Ued to determine the moiture content at which clay oil pa from a platic to a liquid tate and ued alo for the determination of undrained hear trenght ( CEN ISO/TS ). Two verion available: the tandard one and the emiautomatic one where the cone i allowed to free fall for a period of 5 econd. The apparatu feature: A cat iron bae with levelling feet Digital penetration meaurement gauge 0.01 mm preciion Micrometer vertical adjutment device Automatic zeroing Electronic releae mechanim (22-T0029/AD, model only) Penetration cone mut be ordered eparately. See acceorie. A Weight approx.: 8.5 kg Acceorie 22-T0029/1 Penetration tet cone, 30 angle, 22-T0029/2 Cone tet gauge to check the condition of the cone 22-T0029/3 Penetration ample cup 55 mm dia. x 40 mm deep 86-D1332 Penetration ample cup 75 mm dia. x 50 mm deep 22-T0029/4 Penetration tet cone 60 angle, 60 g weight 22-T0029/5 Cone tet gauge for cone 22-T0029/4 22-T0029/7 Penetration tet cone 30 angle, 100 g weight 22-T0029/8 Penetration tet cone 30 angle, 400 g weight M 22-T0029/D Digital liquid limit penetrometer with micrometric vertical adjutment 22-T0029/D with 22-T0029/1 and 22-T0029/3 Other tet equipment to perform the tet 22-T0040/4 Gla plate 500x500x10 mm 86-D1631 Flexible patula 160 mm long 86-D1172 Evaporating dih 160 mm dia. M 22-T0029/AD Semiautomatic digital liquid limit penetrometer with micrometric digital adjutment 22-T0029/AD with 22-T0029/1 and 22-T0029/2 86-D1537 Wah bottle 500 ml cap. 86-D1346 Lever lid tin 1 l cap. 82-D1231 Stop watch 22-T0029/4, 22-T0029/7, 22-T0029/8 53

39 22 Laboratory claification... Liquid limit: Caagrande method Soil Claification Liquid limit device Ued to determine the moiture content at which clay oil pa from a platic to a liquid tate ASTM D4318 / BS 1377:2 / NF P / DIN / UNE 7377, 7002 / UNI General decription and pecification Comprie: removable bra cup, adjutable crank and cam mechanim, blow counter, and bae. Different model are available conforming to the variou pecification in ue. They are identical in hape and different generally according to type of bae and cup weight. Two verion available: hand operated and motor operated. The grooving tool ha to be ordered eparately. 22-T0031/E 22-T0030/E Other tet equipment to perform the tet 22-T0040/4 Gla plate 500x500x10 mm 86-D1630 Flexible patula 100 mm long 86-D1631 Flexible patula 160 mm long 86-D1537 Wah bottle 500 ml cap. 86-D1171/A Porcelain dih 120 mm dia. 86-D1329 Moiture content tin 75 mm dia. x 30 mm Hand operated model and correponding grooving tool Code Standard Grooving tool Code 22-T0030/E BS 1377:2 22-T0032/P 22-T0030/F ASTM D T0032/AP and UNE T0032/A 22-T0030/F UNI T T0030/G NF P T0032/A 22-T0040/4, 86-D1171/A, 86-D1329, 86-D1630, 86-D1631, 86-D1537 Note. Grooving tool model 22-T0032/P and 22-T0032/AP are made of platic and upplied in pack of 10. Motor operated model and correponding grooving tool Code Standard Voltage Grooving tool Code 22-T0031/E BS 1377:2 230 V, 50 Hz, 1 ph. 22-T0032/P 22-T0031/F ASTM D V, 50 Hz, 1 ph. 22-T0032/AP and UNE T0031/F UNI V, 50 Hz, 1 ph. 22-T T0031/FZ ASTM D V, 60 Hz, 1 ph. 22-T0032/AP 22-T0032/A 22-T0031/G NF P V, 50 Hz, 1 ph. 22-T0032/A 22-T0040/4, 86-D1631, 86-D1172, 82-D1231, 86-D1537, 86-D1346 Spare part and Acceorie 22-T0034 Spare bra cup. For all model 22-T0034/1 Roughened cup according to DIN and NF tandarda. For all model. Suggeted fpr andy/ilty clay. 22-T0033, T0034/1 22-T0032/A 22-T0032/AP 22-T0032/P 54

40 oil Soil teting Claification Laboratory claification Shrinkage limit / Linear hrinkage / Platic limit / Particle ize analyi Shrinkage limit ASTM D427 / AASHTO T92 / UNE UNI / NF XP M 22-T0035 Shrinkage limit et The et comprie: 22-T0035/1 Shrinkage dih 45 mm dia. x 12.7 mm high (Q.ty 2) 22-T0035/2 Crytalliing dih 57 mm dia. x 31 mm deep 22-T0035/3 Shrinkage prong plate. Manufactured from tranparent acrylic and fitted with 3 metal prong 86-D1171 Evaporating dih 86-D1630 Spatula 86-D1001 Graduated cylinder 25 ml. Platic carrying cae A Weight approx.: 2 kg Each item can be ordered individually. Platic limit ASTM D4318 / AASHTO T90 / BS 1377:2 UNE / UNI / NF P M 22-T0041 Platic limit tet et The et comprie: 22-T0040/1 Platic limit plate 300x300 mm 22-T0040/2 Stainle teel rod 3 mm dia. 86-D1171 Mixing dih 120 mm dia. 86-D1630 Spatula 86-D1329/A Moiture tin 75 mm dia. x 30 mm (Q.ty 6). Each item can be ordered individually. A Weight approx.: 1 kg Particle ize ditribution (continued) M 22-T0062/5 Conical beaker 1000 ml M 22-T0062/2 Pipette tand with millimetre cale Ued to preciely raie or lower the Andreaen pipette to it required level without diturbing the upenion under tet. A Weight approx.: 10 kg M 22-T0062/3 Sedimentation cylinder 500 ml with rubber bung Ued to contain the tet upenion during the pipette method particle ize ditribution tet. M 22-T0058/A Contant temperature water bath. 230 V, Hz, 1 ph. M 22-T0058/AZ Contant temperature water bath. 110 V, Hz, 1 ph. B Dimenion: (lxdxh) 600x300x380 mm A Weight: 10,5 kg 22-T0062/1, 22-T0062/2, 22-T0058/A, 22-T0062/3 22-T T0035 Particle ize ditribution by the Pipette method Linear hrinkage BS 1377:2 BS 1377:2 To perform the tet the following pecific part and apparatu are required: M 22-T0037 Linear hrinkage mould Internal dimenion: 140 mm long, 12.5 mm radiu A Weight approx.: 300 g 22-T0037 M 22-T0062/1 Andreaen pipette Ued to extract precie quantitie of the oil upenion ready for analyi during the particle ize ditribution tet. A Weight approx.: 300 g 22-T0062/5 55

41 22 Soil Claification Laboratory claification... Particle ize analyi by the hydrometer method Particle ize analyi of oil Hydrometer method ASTM D422 / AASHTO T88 / UNE To determine the particle ize ditribution of very fine material uch a ilt and clay. To perform the tet the following apparatu i required which can be elected a ingle item or grouped in a complete et (ee 22-T0059/A). M 22-T0059/A Particle ize analyi, hydrometer method, ASTM D422 AASHTO T88, complete et. 230 V, Hz, 1 ph.* * 110 V, 60 Hz, 1 ph. verion available on order. Coniting of: 22-D1006/A Hydrometer jar 1000 ml (No. 6 piece) 22-T0060/31 Rubber bung for 22-D1006/A jar (1) 22-T0060/A Soil hydrometer 151 H g/ml 82-D1199 Gla thermometer 0-50 C, div. 0.5 C 22-T0058/A Contant temperature water bath Complete with heater, thermotat and circulating unit. 230 V, Hz, 1 ph. (alternative to 22-T0060/A) 110 V, 60 Hz, 1 ph. verion available on order Capacity: up to 6 cylinder B Dimenion: 600x300x380 mm 22-T0060/1 High peed tirrer, rpm, with cup and baffle. 230 V, Hz, 1 ph. 86-D0802 Sodium hexametaphophate 1000 g 86-D1073 Beaker 250 cc A Total weight approx.: 25 kg Acceorie 22-T0058/3 Cooling coil with clamp. Weight: 2,2 kg 22-T0058/3 cooling coil fitted to the gla tank Spare part 22-T0060/21 Gla tank for 22-T0058/A water bath NF Hydrometer item NF P M 22-D1007/A Hydrometer jar 2500 cm 3 cap., 85 ±5 mm dia., graduated at 500, 1500 and 2000 cm 3 Particle ize ditribution by the Hydrometer method : BS 1377:2 Subtantially the tet i very imilar to that one conforming the ASTM/AASHTO tandard except for ome pecific tet apparatu that are lited below. M 22-T0062/A Soil hydrometer, long tem g/ml. BS 1377/NF M 22-D0445 End-over-end haker. 230 V, 50 Hz, 1 ph. 22-T0062/A M 22-T0062/A Soil hydrometer to g/ml M 22-D1007/A1 Hand tirrer 600 mm long (1) 22-T0060/B Soil hydrometer 152 H - 5 to 60 g/l ( alternative to 22-T0060/A) 22-T0059/A 56

42 Soil Claification Chemical tet ph Paper / Magnetic tirrer / Sulphate and Chloride content 24 ph Paper M 24-D1858/1 ph Strip 1 to 12 ph M 24-D1858/2 ph Indicator paper 0-14 ph Supplied in 5 metre dipener. M 24-D1859/1 Litmu paper red 5-8 ph Supplied in 5 metre dipener. Magnetic tirrer M 24-D0448 Magnetic tirrer. Mixing capacity 1 l 230 V, Hz, 1 ph. M 24-D0448/B Magnetic tirrer. Mixing capacity 2.5 l 230 V, Hz, 1 ph. Ued for titration and tirring. Variable peed. Magnetic teflon coated follower included. B Dimenion: 120x120x45 mm approx. (24-D0448) 180x180x70 mm approx. (24-D0448/B) A Weight approx.: 0.6 kg / 1.6 kg Chloride content BS 1377:3, 812:117 Thi tet method provide a meaurement of water oluble chloride alt preent in an aggregate. It i baed on the Volhard method. Pack of 50 trip. 48-D0543, D0543/A M 48-D0543 Quantab chloride titrator, type 1175 (711195), range 0.005% to 0.1% Na Cl. Pack of 50 trip M 48-D0543/A Quantab chloride titrator, type 1176 (711196), range 0.05% to 1% Na Cl. Pack of 50 trip Sulphate content determination BS 1377:3 M 24-D1840 Ion exchange apparatu General decription and pecification Thi apparatu i ued to determine the ulphate content of ground water and aqueou oil extract. It conit of an ion exchange column 400 mm long and 10 mm dia., a wan-neck outlet and a 1500 ml round bottom flak to give a contant head. The apparatu i upplied aembled on a tand. B Dimenion: 200x100x600 mm approx. A Weight approx.: 5 kg Acceorie 24-D1840/1 Ion exchange rein 500 g M 24-D0852 Sulphate tet trip. Pack of 100 A Weight approx.: 10 g 24-D D

43 24 Soil Claification Chemical tet... Ph Meter ph Meter BS 1377:3, ASTM D1067 M 24-D1845 Laboratory ph / mv / C meter. Battery and main operated M 24-D1846 Portable ph / mv / C meter. Battery operated 24-D1846 M 24-D1847 Pocket electronic ph teter. Battery operated Specification: ee table. 24-D D1845 with magnetic tirrer Specification 24-D D D1847 Range: ph 0.00 to to to mv ±1999 (ORP) ± 400 to ± 1999 (ORP) - C 0.0 to to Reolution: ph mv 1 (ORP) 1 (ORP) - C Accuracy at 20 C ph ± 0.01 ± 0.01 ± 0.2 mv ±1 (ORP) ± 1 (ORP) - C ± 0.5 ± ph calibration Automatic 1 or 2 point Automatic 2 point Manual 2 point with 5 memoried buffer with 3 memoried buffer through trimmer Temperature Automatic or manual from Automatic from 0 to 100 C - compenation 0 to 100 C or manual without electrode temperature probe Power upply * 12 V DC with 230 V 1 x 9 V battery 2 x 1.4 V batterie adapter included (100 hour ue approx.) (3000 hour ue approx.) B Dimenion 240x182x74 mm 185x82x45 mm 66x50x25 mm A Weight 1.1 kg 0.5 kg 70 g * Note. For ue with 110 V ak for the 24-D1845/1 Adapter Acceorie and pare For model 24-D D D1847 Combination ph electrode 24-D1845/2 24-D1846/2 24-D1847/2 ph 4.01 buffer olution 24-D1845/3 24-D1845/3 - ph 7.01 buffer olution 24-D1845/4 24-D1845/4 - ph 9.18 buffer olution 24-D1845/5 24-D1845/5 - Temperature probe 24-D1845/6 24-D1845/6 - Kit of 5+5 ph 4 and D1847/7 110 V adapter 24-D1845/1 - - Magnetic tirrer 24-D

44 Soil Claification Chemical tet ph Paper / Sulphate and Chloride content 24 Water tet kit M 24-D1870/A Acidity tet kit Acidity i the quantitative capacity of a water ample to neutralie a bae to a et ph. Therefore the greater acidity the more potentially corroive the water. The kit i upplied complete with 30 and 100 ml calibrated veel, reagent, graduated yringe with pipette tip and intruction. B Dimenion: 260x120x60 mm A Shipping weight: 910 g 24-D1870/B and 24-D1870/C 24-D1870/A M 24-D1870/B Chloride tet kit Chloride ion are one of the major inorganic anion in water and watewater. The kit i upplied complete with 30 and 100 ml calibrated veel, reagent, graduated yringe with pipette tip and intruction. B Dimenion: 200x120x60 mm A Shipping weight: 460 g M 24-D1870/C Hardne tet kit In hitory, water hardne wa defined by the capacity of water to precipitate oap. The ionic pecie in the water cauing the precipitation wa later found to be calcium and magneium. The kit i upplied complete with 30 and 100 ml calibrated veel, reagent, graduated yringe with pipette tip and intruction. B Dimenion: 200x120x60 mm A Shipping weight: 460 g Soil colour chart M 24-D1860/A Soil colour chart. Set of 7 M 24-D1860/T Tropical oil colour chart. Set of 2 General decription and pecification Ued by civil engineer, agronomit, oil cientit etc. for the determination of oil colour. For 24-D1860/A the et conit of 7 contant hue chart howing 196 colour. Chart and diagram are fitted in a pocket ize binder. For 24-D1860/T the et conit of 2 chart which can be fitted into the binder of 24- D1860/A. B Dimenion: 140x190 mm approx. A Weight approx.: 500 g 24-D1860/A 59