Laboratory Equipment. Tel: +44 (0) u Fax: +44 (0) u

Transcription

1 Laboratory Equipment 78 Load Measurement 78 Drying and Weighing 79 Test Sieves 80 Sieve Shakers 81 Laboratory Hardware 82 Glass and Plastic Ware 82 Temperature Measurement 82 General 85 Mobile Laboratories 130 Tel: +44 (0) u Fax: +44 (0) u ele@eleint.co.uk

2 78 Laboratory Equipment - Load Measurement Load Rings Calibrated in Compression Typical load measurement applications for load rings Clamped Boss Load Rings u u u Repeatability within 0.2% of indicated load Accuracy within ±1% of indicated load Works calibrated ELE Clamped Boss Load Rings are available in the range 1 kn to 50 kn. The available capacities and performance of ELE load rings satisfy the requirements for accurate load measurement for a wide range of testing applications. The repeatability and accuracy of all clamped boss rings comply with the requirements of NIS 0415 Accreditation for the Calibration of Force Measuring Rings and Load Cells used in Soil Testing. The repeatability of all load rings is within 0.2% of indicated load and accuracy is ±1% of indicated load over the upper 80% of the working range, at the calibration loads. All clamped boss load rings are calibrated in kn and supplied with a calibration chart. Complete with a detachable nipple, all rings are supplied in a protective foam moulding. Capacity Typical design sensitivity number kn kgf lbf N/div kgf/div lbf/div Overall height mm Approx weight kg EL EL EL Complete with a detachable nipple, all rings, are supplied EL in a protective foam 10.0 moulding EL EL For 24/7 online ordering, payment & order tracking go to

3 78 Laboratory Equipment - Load Measurement Electronic Balances Catalogue Capacity Resolution Pan Size Mains and Battery Dimensions (l x w x h) EL / g x 0.1 mg 100 mm dia 470 x 185 x 280 mm 12 kg EL / g x g 125 x 125 mm 300 x 205 x 90 mm 6 kg EL / g x 0.01 g 160 x 160 mm 260 x 170 x 90 mm 6 kg EL / g x 0.01 g 160 x 160 mm 260 x 170 x 90 mm 6 kg EL / g x 0.1 g 225 x 300 mm YES 340 x 320 x 125 mm 4 kg EL / g x 0.5 g 225 x 300 mm YES 340 x 320 x 125 mm 4 kg EL / g x 0.1 g 340 x 300 mm 314 x 460 x 125 mm 18 kg EL / g x 1.0 g 225 x 300 mm YES 340 x 320 x 125 mm 6 kg EL / g x 5.0 g 425 x 525 mm YES 700 x 425 x 950 mm 15 kg EL / g x 20.0 g 310 x 300 mm YES Base 300 x 310 x 50 mm Indicator 80 x 270 x 30 mm 5 kg For V AC, Hz, 1 ph. 132 Tel: +44 (0) u Fax: +44 (0) u ele@eleint.co.uk

4 78 Laboratory Equipment - Load Measurement Mechanical Balances EL Harvard Trip Balance EL Triple Beam Balance EL Heavy-duty Solution Balance number Capacity Resolution Pan size (diameter) Overall dimensions (l x w x h) EL Harvard Trip Balance 2000 g 0.1 g 2 x 150 mm 152 x 356 x 254 mm 2.7 kg EL Set of s for EL kg EL Triple Beam Balance 2610 g 0.1 g 150 mm 470 x 180 x 150 mm 3.2 kg EL Heavy-duty Solution Balance g 1.0 g 280 mm 279 x 864 x 279 mm 20.0 kg 133 For 24/7 online ordering, payment & order tracking go to

5 78 Laboratory Equipment - Drying and Weighing Rapid Drying Hotplate A hotplate offers an alternative method of drying materials in bulk. Even heat distribution is not as good as an enclosed chamber, however sensible use of the hotplate will often enable test requirements to be met satisfactorily. Specification Construction Nominal diameter Cast-iron top and base ventilated sheet-steel body 200 mm Maximum temperature 500ºC Rated power 2000 W 5 kg EL /01 Hotplate fitted with a Simmerstat heat control unit. For V AC, Hz, 1 ph. Digital Hotplate EL /01 Hotplate Specification Dimensions Construction Maximum temperature 300 x 1ºC Rated power 520 x 360 x 130 mm Robust metal with anodised aluminium plate heated surface 1500 W EL /01 Digital Hotplate EL /01 Digital Hotplate fitted with digital setting of plate temperature controlled via microprocessor. Includes digital temperature indication. Temperature display resolution of ±1 C. For V AC, 50 Hz 1ph. 134 Tel: +44 (0) u Fax: +44 (0) u ele@eleint.co.uk

6 78 Laboratory Equipment - Drying and Weighing Large Capacity Drying Oven These ovens are designed for drying large quantities of soils and aggregate samples and maintain temperature in accordance with BS1377. Constructed from mild steel with a coated exterior and an aluminium coated steel chamber, the ovens are fitted with a thermostatic control and feature fan-circulation for even temperature distribution throughout the interior. A safety overheat thermostat is fitted as standard and the units are supplied with the temperature indicator pre-set to C. Note: these ovens have a 2-year warranty. Specification Capacity Dimensions (l x w x h) External Internal Fluctuation Rated power heater elements Shelves supplied 3 Shelf positions 4 EL / litre Drying Oven. For V AC, Hz, 1 ph. Accessory 225 litres 540 x 1040 x x 920 x 600 ± 0.75 C 2000 W 80 kg EL Dial Thermometer C, 40 mm diameter dial with collar fixing for door. General Purpose Ovens These ovens meet the requirements of BS 2648, 598, 1377 and The exterior is constructed from sheet steel finished in powder coated paint. The chambers are made from aluminium clad mild steel, fitted with shelf runners and wire grid shelves. All units are fan circulated and fitted with direct reading thermostat and overheat thermostat. EL / litre Drying Oven EL /01 50 litre Drying Oven EL /01 50 litre Drying Oven. For V AC, Hz, 1 ph. EL / litre Drying Oven. For V AC, Hz, 1 ph. EL / litre Drying Oven. For V AC, Hz, 1 ph. Specification EL Series EL Series EL Series Capacity 50 litres 100 litres 150 litres Dimensions (l x w x h) External Internal 570 x 610 x x 490 x x 610 x x 490 x x 610 x x 490 x 550 Temperature range 40 to 250 C 40 to 250 C 40 to 250 C Fluctuation ± 0.75 C ± 0.75 C ± 0.75 C Rated power heater elements 1000 W 1200 W 1500 W Shelves supplied Shelf positions kg 44 kg 60 kg 135 For 24/7 online ordering, payment & order tracking go to

7 79 Laboratory Equipment - Test Sieves Test Sieves Particle Size Analysis Particle Size Analysis is probably performed in most, if not all, laboratories engaged in testing materials for civil engineering applications. The range of sieves offered include ISO, EN, BS and ASTM sieves. Woven wire test sieves are manufactured from stainless steel mesh. Perforated plate test sieves are manufactured from tinned steel plate. All test sieves, unless otherwise indicated, are supplied with full-depth frames. Woven Wire Mesh Sieves British Standard Sieves BS 410/ISO 3310 Aperture size Frame diameter 200 mm 300 mm 38 µm EL EL µm EL µm EL µm EL EL µm EL EL µm EL EL µm EL EL µm EL EL µm EL µm EL EL µm EL EL µm EL µm EL EL µm EL EL µm EL EL µm EL EL µm EL EL µm EL µm EL EL µm EL EL µm EL EL µm EL EL µm EL EL µm EL µm EL µm EL µm EL EL mm EL EL mm EL EL mm EL EL mm EL mm EL EL mm EL EL mm EL EL mm EL EL mm EL EL mm EL EL mm EL EL mm EL EL mm EL EL mm EL Special Note: Sizes and models highlighted in this colour comply to ISO Sizes and models highlighted in this colour comply to EN Tel: +44 (0) u Fax: +44 (0) u ele@eleint.co.uk

8 79 Laboratory Equipment - Test Sieves Perforated Plate Sieves (Square Hole) British Standard Sieves BS 410/ISO 3310 Aperture size Frame diameter 200 mm 300 mm 4.00 mm EL EL mm EL EL mm EL EL mm EL mm EL EL mm EL EL mm EL EL mm EL EL mm EL EL mm EL mm EL EL mm EL EL mm EL EL mm EL EL mm EL EL mm EL EL mm EL mm EL EL mm EL EL mm EL EL mm EL EL mm EL mm EL mm EL EL mm EL mm EL EL mm EL EL mm EL mm EL mm EL Special Note: Lids and Receivers ISO and BS Sieves Sieve diameter 200 mm 300 mm Lid EL EL Receiver EL EL Washing Sieve Sizes and models highlighted in this colour comply to ISO Sizes and models highlighted in this colour comply to EN EL µm Washing Sieve. 200 mm diameter, 200 mm deep. 137 For 24/7 online ordering, payment & order tracking go to

9 79 Laboratory Equipment - Test Sieves Test Sieves ASTM E11 sieves are similar in construction to those used in the British Standard range. Woven Wire Mesh Sieves Two frame sizes are available as standard, 8 inch or 12 inch diameter. Aperture size Alternative designation Frame diameter 8 inch 12 inch 38 µm No. 400 EL EL µm No. 325 EL EL µm No. 270 EL EL µm No. 230 EL EL µm No. 200 EL EL µm No. 170 EL EL µm No. 140 EL EL µm No. 120 EL EL µm No. 100 EL EL µm No. 80 EL EL µm No. 70 EL EL µm No. 60 EL EL µm No. 50 EL EL µm No. 45 EL EL µm No. 40 EL EL µm No. 35 EL EL µm No. 30 EL EL µm No. 25 EL EL µm No. 20 EL EL mm No. 18 EL EL mm No. 16 EL EL mm No. 14 EL EL mm No. 12 EL EL mm No. 10 EL EL mm No. 8 EL EL mm No. 7 EL EL mm No. 6 EL EL mm No. 5 EL EL mm No. 4 EL EL mm No. 31/2 EL EL mm 1/4 in. EL EL mm in. EL EL Woven Wire Mesh Sieves Aperture size Alternative designation Frame diameter 8 inch 12 inch 8.00 mm 5/16 in. EL EL mm 3/8 in. EL EL mm 7/16 in. EL EL mm 1/2 in. EL EL mm in. EL EL mm 5/8 in. EL EL mm 3/4 in. EL EL mm 7/8 in. EL EL mm 1 in. EL EL mm 1.06 in. EL mm 11/4 in. EL mm 11/2 in. EL EL mm 13/4 in. EL mm 2 in. EL EL mm 2.12 in. EL mm 21/2 in. EL EL mm 3 in. EL EL mm 31/2 in. EL mm 4.0 in. EL mm 5.0 in. EL Lids and Receivers ISO and BS Sieves Diameter 8 inch 12 inch Lid EL EL Receiver EL EL Sieve Brushes EL Sieve Brush. Double-ended, brass and nylon bristle. EL Sieve Brush. Nylon, double-ended. Sieve Brushes EL µm Washing Sieve. 8 in diameter x 8 in deep. 138 Tel: +44 (0) u Fax: +44 (0) u ele@eleint.co.uk

10 80 Laboratory Equipment - Sieve Shakers Sieve Shaker Hand sieving of a large number of samples can often be tedious and sometimes lead to inaccuracy of results. The following machine provides a wide choice of options for the busy laboratory. ELE Sieve Shaker EN The ELE sieve shaker is powered by an electromagnetic drive that has no rotating parts to wear making it maintenance free and extremely quiet in operation. The unit features a triple Vertical-Lateral-Rotary vibrating action that moves the sample over the sieve producing faster more efficient sieving, while the rapid vertical movements also help keep the apertures from blinding. The shaker is ideal for laboratory or on site use. It is robust, compact and sufficiently lightweight to be portable. The separate digital microprocessor controlled console unit incorporates a keypad for setting the sieving program and is isolated from any effects of vibration from the shaker. As standard the shaker includes, timer minutes, adjustable vibration intensity and adjustable intermittent or continuous operation. EL /01 ELE Sieve Shaker The unit accepts up to ten 200 mm or 8 inch, full height, diameter sieves and lid and receiver, or up to six 300 mm or 12 inch diameter sieves and lid and receiver. EL /01 ELE Sieve Shaker complete as specified. Dimensions (l x w x h) 380 x 440 x 1085 mm. 65 kg. For V AC, 50 Hz 1ph. 139 For 24/7 online ordering, payment & order tracking go to

11 81 Laboratory Hardware - Laboratory Hardware Laboratory Hardware The laboratory hardware listed provides a comprehensive range of products suitable for most general test applications. Stand, Bosshead and Clamp EL Support Assembly. Comprising retort stand, bosshead and clamp. Spatulas EL Support Assembly EL EL EL EL Spatula. 100 mm blade with wooden handle. Spatula. 150 mm blade with wooden handle. Spatula. 200 mm blade with wooden handle. Chattaway Spatula. 125 mm long. Scoops and Shovels EL EL EL EL Scoop. 70 x 110 x 40 mm, cast aluminium with handle. Scoop. 120 x 190 x 70 mm, cast aluminium with handle. Scoop. 250 mm long x 125 mm dia. stainless steel, 5 kg capacity. Shovel. With flat blade 250 x 300 mm. 3 kg. EL81-01 series Spatulas Trowels and Floats EL Trowel. Gardeners type, stainless steel blade. EL Trowel. Gauging with steel blade 200 mm long, complies with BS EL Float. Plasterer s type, with steel blade 280 x 115 mm. 450 g. Scoops and Trowels 140 Tel: +44 (0) u Fax: +44 (0) u ele@eleint.co.uk

12 81 Laboratory Equipment - Laboratory Hardware Rubber Tubing Internal diameter Outside diameter EL mm 16.5 mm Rubber tubing is priced per metre. EL is suitable for vacuum applications. Watches and Clocks EL Rubber Tubing EL EL Timer Clock. Battery-operated. Easy to read digital display of hours, minutes and seconds. Timer counts down and sounds beeping tone. Clock functions independently of timer. Supplied complete with battery. Dimensions 13 x 64 x 58 mm (l x w x h). Stop Watch. LCD quartz watch, features alarm, time/calendar display, 30 minute count in 1/100 sec. Battery-operated. Dimensions 20 x 60 x 80 mm (l x w x h). EL Timer Clock Miscellaneous Laboratory Hardware Size/capacity EL Crucible Tongs. Straight, 200 mm long 100 g EL Heavy-duty Rubber Gloves 700 g EL Heat-resistant Gloves, with gauntlet 500 g EL Chisel, masonry type 300 x 20 mm 1 kg EL Vernier Callipers 200 x 0.02 mm 100 g EL Vernier Callipers, LCD 200 x 0.01 mm 100 g EL Wire Brush 300 g EL Trimming Knife 130 mm long 150 g EL Straight Edge 455 mm long 600 g EL Engineer s Steel Rule 300 mm 100 g EL Polythene Bag, pack of x 254 mm 2.5 kg EL Polythene Bag, pack of x 1000 mm 10.5 kg EL Rubber Bucket 9 litres (2 gal) 3 kg 141 For 24/7 online ordering, payment & order tracking go to

13 81 Laboratory Equipment - Laboratory Hardware Moisture Content Tin and Sample Containers EL Moisture Content Tin. Tin plate, (unnumbered). 90 mm diameter x 20 mm deep. 90 g capacity. EL Sample Container. Tinned Steel. Lever Lid, 0.5 litres. EL Sample Container. Tinned Steel. Lever Lid, 2.5 litres. EL Sample Container. Tinned Steel. Lever Lid, 10 litres. EL Sample Container. Plastic, Snap-on lid, 1 litre. EL Sample Container. Plastic, Snap-on lid, 10 litres. EL Transport/storage Container. 22 (approx) litres. 18 g 100 g 200 g 600 g 100 g 600 g 1 kg Sample Trays Wire Baskets Dimensions EL EL EL Sample Tray. Heavy-duty, galvanised steel, nesting 306 x 306 x 38 mm. Sample Tray. Heavy-duty, galvanised steel, nesting 406 x 406 x 50 mm. Sample Tray. Heavy-duty, galvanised steel, nesting 610 x 610 x 63 mm kg 1.60 kg 2.60 kg EL Wire Basket. BS 812 Type 1, EN , 65 mm dia x 80 mm deep, 150 µm wire mesh. EL Wire Basket. BS 812 Type 2, EN , 95 mm dia x 120 mm deep, 600 µm wire mesh. EL Wire Basket. BS 812 Type 3, EN , 95 mm dia x 120 mm deep, 1.18mm wire mesh. EL Wire Basket. BS 812 Type 4, EN , 120 mm dia x 120 mm deep, 3.35 mm wire mesh. EL EL EL Sample Tray. Heavy-duty, galvanised steel, nesting 910 x 910 x 76 mm. Sample Tray. Heavy-duty, galvanised steel, nesting 1200 x 1160 x 50 mm. Sample Tray. Stainless steel spinning, without seams 305 mm diameter x 50 mm. 8 kg kg 1.0 kg Beakers and Bowls EL EL Beaker. 500 ml capacity, aluminium. Bowl. 2.5 (approx) litre capacity, stainless steel. EL Bowl. 5 (approx) litre capacity, stainless steel. EL Bowl. 11 (approx) litre capacity, stainless steel. 142 Tel: +44 (0) u Fax: +44 (0) u ele@eleint.co.uk

14 82 Laboratory Equipment - Glass and Plastic Ware Glass and Plastic Ware Beakers and Covers EL EL EL EL EL Beaker, borosilicate glass, squat form. Beaker, borosilicate glass, squat form. Beaker, borosilicate glass, squat form. Beaker, borosilicate glass, squat form. Beaker Cover, watch glass. Borosilicate glass, 100 mm dia. Capacity 100 ml 250 ml 600 ml 1000 ml Pipettes and Burettes Capacity EL Graduated Pipette, Type 1, Class B, BS ml sub-divisions. 10 ml (nominal) Measuring Cylinders, BS EL EL EL EL EL EL Measuring Cylinder, soda glass, spouted, BS EN Measuring Cylinder, soda glass, spouted, BS EN Measuring Cylinder, soda glass, spouted, BS EN Measuring Cylinder, soda glass, spouted, BS EN Measuring Cylinder, plastic with spout, graduated to BS Measuring Cylinder, plastic with spout, graduated to BS Capacity 100 ml 250 ml 500 ml 1000 ml 100 ml 250 ml EL Graduated Pipette, Type 1, Class B, BS ml subdivisions. 25 ml (nominal) EL Bulb Pipette, BS ml EL Burette, soda glass with singlebore stopcock, BS EN ISO 385 Class B, 0.10 sub-divisions. 50 ml (nominal) Evaporating Dishes EL EL Evaporating Dish, shallow form with spout, porcelain 100 x 40 mm nominal diameter x height. Evaporating Dish, shallow form with spout, porcelain 150 x 45 mm nominal diameter x height. EL EL Measuring Cylinder, plastic with spout, graduated to BS Measuring Cylinder, plastic with spout, graduated to BS ml 1000 ml EL Evaporating Dish, shallow form with spout, porcelain 200 x 55 mm nominal diameter x height. 143 For 24/7 online ordering, payment & order tracking go to

15 82 Laboratory Equipment - Glass and Plastic Ware Funnels and Flasks EL EL EL EL EL EL EL EL EL Desiccators Volumetric Flask, soda glass, stoppered to BS ISO 1042 Class B. Volumetric Flask, soda glass, stoppered to BS ISO 1042 Class B. Volumetric Flask, soda glass, stoppered to BS ISO 1042 Class B. Volumetric Flask, soda glass, stoppered to BS ISO 1042 Class B. Conical Flask (Erlenmeyer), borosilicate glass, wide mouth graduated, 100 ml sub-divisions (nominal). Conical Flask (Erlenmeyer), borosilicate glass, wide mouth graduated, 50 ml sub-divisions (nominal). Filter Flask, conical type with integral side arm. Buchner Funnel, size no. 5 accepts 110 mm diameter filter paper. Funnel, polythene, 200 mm diameter. EL EL EL EL Capacity 100 ml 250 ml 500 ml 1000 ml 500 ml 250 ml 1000 ml Desiccator, non-vacuum type, 200 mm internal diameter borosilicate glass. Supplied with perforated zinc disc. Desiccator Cabinet, non-vacuum, internal dimensions 300 x 300 mm acrylic plastic. Supplied with 1 shelf and 2 desiccant trays. Desiccator, vacuum type, 280 mm internal diameter, soda glass. Supplied with perforated zinc disc and stopcock. Safety Cage for EL Bottles and Crucibles EL Weighing Bottle, glass with stopper, 25 x 50 mm diameter x height. EL Wash Bottle, polythene, 500 ml capacity. EL Reagent Bottle, 1000 ml, amber glass plastic stopper. EL Polythene Bottle, wide neck, screw cap, 1 litre. EL Polythene Bottle, wide neck, screw cap, 5 litres. EL Porcelain Crucible, 30 ml capacity complete with lid. Syringe and Stirring Rod EL Syringe with rubber bulb. 500 g. EL Volumetric Flasks Glass Stirring Rod, 7 mm diameter x 200 mm long. Pack of Tel: +44 (0) u Fax: +44 (0) u ele@eleint.co.uk

16 82 Laboratory Equipment - Temperature Measurement Hydrometers, Aggregate Testing BS 812, EN , ASTM C88, AASHTO T104 EL Hydrometer, type L50, ASTM C 88 graduated 1150 to 1200 relative density (used with sodium sulphate method). EL Hydrometer, type L50, ASTM C 88 graduated 1250 to 1300 relative density (used with magnesium sulphate method). Portable Dial-type Thermometers Hydrometers EL EL EL EL EL EL Portable Thermometer, 64 mm diameter dial with a 650 mm long stem. Portable Thermometer, 25 mm diameter dial with a 90 mm long stem and protective sheath. Portable Thermometer, 25 mm diameter dial with a 100 mm long stem and protective sheath. Portable Thermometer, 50 mm diameter dial with a 200 mm long stem and protective sheath. Portable Thermometer, 50 mm diameter dial with a 180 mm long stem. Portable Thermometer, complies with BS 598 for temperature measurement of bituminous mixes prior to and during laying. Graduated in 2ºC divisions with a stem length of 300 mm and accurate to ± 2ºC. Non Hazardous Glass Thermometers Range C +50 to to to to ml 0 to +250 Range C Divisions Immersion EL to ºC 76 mm EL to ºC Total EL to ºC Total EL to ºC Total General-purpose Thermometers Portable Dial Thermometers Range ºC EL Surface Thermometer, 0 to +160 flat surface type with approximately 64 mm diameter dial. Accuracy ± 3ºC. EL Maximum and Minimum Thermometer. Non hazardous. 40 to For 24/7 online ordering, payment & order tracking go to

17 82 Laboratory Hardware - Temperature Measurement Digital Thermometers Hand-held Digital Thermometers u u Splash-proof membrane circuitry Complete with probes and case This Hand-held Digital Thermometer is ideal for laboratory or site use. The unit provides for Celsius and/ or Fahrenheit display to a clear LCD, powered by a standard 9 V PP3 battery or equivalent. The thermometer is supplied complete with surface probe, penetration probe, battery and case. EL Digital Thermometer Specification Range Resolution and accuracy Cold junction (automatic) 0 to 45ºC 500 g 75 to +1200ºC or 30 to ºC or 75 to +1999ºF 1ºC ( 75 to +1200ºC), 0.2% ± 0.1ºC, 0.1ºC ( 30 to ºC) 0.2% ± 1.0ºC, 1ºF ( 75 to +1999ºF), 0.2% ± 2.0ºF EL Digital Thermometer. 75 C to +1200ºC. Accessory EL /10 Thermocouple Wire. 3 metre length, suitable for EL Digital Thermometer. The thermocouple is NiCr/NiAi PTFE covered with a naked exposed junction. Supplied with a coupling unit the maximum reading is 250ºC with a tip diameter of 0.5 mm. (Pack of 5). Digital Pocket Thermometer EL /10 Thermocouple Wire Specification Dimensions (l x w x h) Range Resolution Accuracy 150 x 45 x 19 mm 49.9 to 199.9ºC 0.1ºC ±0.4ºC 105 g EL Digital Pocket Thermometer. The stainless steel probe carries a highly accurate platinum sensor and when not in use folds back into the side of the instrument. With a clear 8 mm high LCD display this instrument is powered by a standard 12 V MN21 battery or equivalent. EL Digital Pocket Thermometer 146 Tel: +44 (0) u Fax: +44 (0) u ele@eleint.co.uk

18 82 Laboratory Equipment - General Chemicals, Test and Reference Materials EL Paraffin Wax. No hazard (congealing point approx 49ºC). 5 kg block. EL Silica Gel. Coarse. No hazard. 500 g. EL Sodium Sulphate. Anhydrous. No hazard. 3 kg. EL Mould Oil. No hazard. 25 litre drum. EL Standard Sand. 600/300 µm, Fraction C. No hazard. 25 kg. EL Standard Sand. ASTM. No hazard. 25 kg. EL Standard Sand. 850/600 µm. No hazard. 25 kg. Vacuum Pumps EL Filter Pump Specification Construction Ultimate vacuum Water supply pressure required Moulded plastic body 12 to 15 torr (12 to 15 mm Hg) 14 kpa 200 g EL /01 Vacuum Pump Specification Type Pump Ultimate vacuum Displacement Electrical supply Single stage Oil filled rotary 4 x 10 2 mbar 42 litres per minute (2.4 m 3 /hour) V AC, Hz, 1 ph 12.7 kg Accessories Rubber Tubing see EL EL /12 Water Trap Filter Papers Box of 100 Spare EL /10 Vacuum Oil. 4 litre. Fast EL Medium EL Slow EL Filter Paper no. 55 x 400 mm diameter. Filter Paper no. 74 x 150 mm diameter. Filter Paper no. 95 x 110 mm diameter. Filter Papers EL /01 Vacuum Pump and EL Filter Pump 147 For 24/7 online ordering, payment & order tracking go to

19 82 Laboratory Equipment - General Water Baths Specification EL /01 EL /01 Capacity 12 litres 18 litres Working area 210 x 300 mm 390 x 300 mm Tray Yes Yes Max water depth 130 mm 130 mm Controller Digital Digital Temperature Range ºC Stability ºC Electrical supply 0 to 99.9 ± V AC, Hz, 1 ph Rated power kw kg 9.2 kg Distilled Water Still 0 to 99.9 ± V AC, Hz, 1 ph Specification Dimensions (l x w x h) Boiling chamber Condenser Output Electrical supply Rated power 590 x 530 x 940 mm Glass Borosilicate glass 3.5 litres/hr when permanently connected to water supply V AC, Hz, 1 ph 2.75 kw 12 kg EL /01 Distilled Water Still EL /01 Distilled Water Still Masonry Saw Specification Dimensions (l x w x h) Cutting depth with 300 mm diameter blade Electrical supply Rated power 1195 x 705 x 1350 mm 110 mm V AC, 50 Hz, 1 ph, separate fused power supply and switching required 2200 W 120 kg EL /01 Masonry Saw Accessories EL /12 Diamond Blade. Wet cutting. Blade diameter 350mm, depth of cut 110 mm. EL /01 Masonry Saw 148 Tel: +44 (0) u Fax: +44 (0) u ele@eleint.co.uk

20 83 Laboratory Equipment - General Air Compressors number EL /01 EL /01 Dimensions 483 x 457 x x 457 x 914 (l x w x h) (mm) Free air delivery 2.0 cfm 6.0 cfm Receiver capacity 50 litres 116 litres Maximum pressure 1000 kpa 1380 kpa Continuous 700 kpa 1000 kpa working pressure Electrical supply V AC 1 ph 50 Hz V AC 1 ph 50 Hz Water Trap No Yes 57 kg 149 kg Dial Gauges number Dia. mm Travel mm Grad. mm Scale Anvil Back type EL RH Ball C EL RH None B EL RH Ball A Key: RH scale clockwise rotation LH scale anticlockwise rotation Back type see diagram Back type A B C EL83-17 series Air Compressor Furnaces Muffle furnaces are widely used for determining various properties of construction materials. Note: EL /01 complies with the following Standards: EN BS 1016:4;; ISO 344, 1171; ASTM D2361,D2795, D3714. number Dimensions (l x w x h) External Work chamber Internal volume EL / x 430 x 650 mm 455 x 170 x 90 mm 6.9 litres Maximum temperature 1100ºC Electrical supply V AC, Hz, 1 ph Power supply 3900 W 63 kg EL /01 Muffle Furnace 149 For 24/7 online ordering, payment & order tracking go to