UNICO MANUFACTURING CO. (PE) (PTY) LTD BRAKE FLUID DOT3 IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND COMPANY

Transcription

1 UNICO MANUFACTURING CO. (PE) (PTY) LTD BF Iued Augut 006 BRAKE FLUID DOT DATA SHEET IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND COMPANY Trade name: Engman Brake & Clutch Fluid DOT Product name: Brake Fluid DOT Product code: BF - U619 Product type: High Performance Brake and Clutch Fluid Supplier: Unico Manufacturing Co. (PE) (Pty) Ltd Addre: 6 Celebe Road, Iland View, Durban, South Africa Contact number: +7 (1) Emergency telephone number: +7 (9) / +7 (0) Emergency contact peron: S Moonamy DAP Control Room: +7 (1) Decription Phyical propertie Brake Fluid DOT i a heavy-duty brake and clutch fluid with a minimum boiling point of 8 C [460, exceeding SAE J170 and FMVSS Nr.116 DOT and ISO 495 pecification. The brake fluid form an eential component in the braking ytem of a car. In ervice, the brake fluid aborb moiture, which caue a ignificant reduction in the boiling point of the brake fluid, with a conequent rik of vapour lock. Thank to it higher boiling point, Brake Fluid 450 offer additional afety margin againt water pick up. Brake Fluid are completely micible with one ather and are compatible with other approved DOT glycol ether and borate eter brake fluid. They mut t be mixed with ilicone eter type brake fluid. Property Unit Tet method - Viual Clear liquid Colour Pt/Co - SMS Denity at 0 C [68 g/ml ASTM D Water content %(m/m) ASTM D164 max 0.0 FMVSS Equilibrium Reflux Boiling Point (ERBP) 5.1. Wet Equilibrium Reflux Boiling Point (WERBP) 5.1. Kinematic vicoity At 40 C [-40 At 100 C [ ph (50% vol aqueou ethal olution) 05 [401] min [48-50] 140 [84] min 149 [00] ²/ ²/ 1500 max 1.5 min

2 1 Sale : 8 C [460 continued FMVSS Fluid tability (a) High tability: ERBP change (b) Chemical tability: ERBP change Corroion, tet trip weight change, Tinned iron Steel Aluminium Cat iron Bra Copper Pitting or etching mg/cm².0 [5.4] max, [.6].0 [5.4] max, [.6] 0.1 max 0.4 max 0.4 max Condition of fluid after tet, Gelling at C [7.4 Depoit Sediment ph t crytalline 0.10 max Condition rubber cup after tet Diintegration Diameter increae Fluidity and appearance at low Bubble flow time (b) At 50 C [-58 Bubble flow time Evaporation Lo Reidue Reidue pour point 15 max 1.4 max 10 max A before tet 5 max A before tet %(m/m) 80 max to contain precipitate that remain gritty or abraive below 5 [] pa Pa 4 pa <-5 [<]

3 continued FMVSS Water tolerance Bubble flow time (b) At +60 C [140 Stratification Sedimentation Compatibility (b) At +60 C [140 Stratification Sedimentation Reitance to oxidation Tet trip Pitting or etching Gum depoit Weight change Aluminium Cat iron Effect on SBR cup (a) 70hr at 70 C [158 Bae diameter increae (b) 70 hr at 10 C [48 Bae diameter increae Stroking tet propertie 10 max a before tet 0.15 max max trace only mg/cm mg/cm 0.05 max. 0. max diintegration diintegration to pa pa pa pa Other claue SAE J170 Propertie Unit Effect on EPDM lab tock (a) 70 hr at 70 C [158 Volume increae (b) 70 hr at 10 C [48 Volume increae % % diintegration 0-15 diintegration 1

4 [ for each degree that the ERBP exceed 5 C Sale : C [5.4 max. 4 Sale : 0.05 max. Safety data Tet method Storage and handling Hazard Information Property Unit Tet method Flahpoint (PMCC) C [ Auto Ignition C Temperature [ value ASTM D9 119 [46] ASTM E659 >00 [>57] ASTM method are publihed by the American Society for Teting and Material, 100 Barr Harbor Drive, PO Box C700, Wet Conhohocken, Pennylvania, USA SAE pecification are iued by the Society of Automotive Engineer, Inc., 400 Coonwealth Drive, Warrendale, PA 15096, USA. The Department of Tranportation DOT, DOT 4 and DOT 5.1 are decribed under the Code of Federal Regulation (United State) Motor Vehicle Safety Standard Nr.116, Motor Vehicle Brake Fluid. Detail are publihed in the Federal Regiter. ISO Standard are publihed under the uperviion of the International Standard Organiation and are available from National Standard Intitute. The tet method mentioned above are t necearily thoe ued for quality control analyi, but uch method have been validated againt them. Care hould be taken to avoid moiture pick up. Further advice on torage and handling may be obtained from your local company. Brake Fluid 450 i available from Unico in bulk and drum; detail available on requet. Before handling the product pleae read the Safety Data Sheet of Brake Fluid DOT carefully and follow the advice given. Product Code The information contained in thi publication i to the bet of our kwledge, true and accurate, but any recoendation or uggetion which may be made are without guarantee, ince the condition of ue are beyond our control. Furthermore, thing contained herein hall be contrued a a recoendation to ue any product in conflict with exiting patent covering any material or it ue. The above typical value do t contitute a pecification.

5 Edition No: 0 Supplier Reference No: AO.1.8. Firt Iue: 01 November 1998 Reviion No: September 05 DISCLAIMER: The information contained in thi publication i, to the bet of our kwledge, true and accurate, but any recoendation or uggetion, which may be made, are without guarantee, ince the condition of ue are beyond our control. Furthermore, thing contained herein hall be contrued a a recoendation to ue any product in conflict with exiting patent covering any material or it' ue.