Heavy Industrial Shock Absorbers CA2 to CA4

Transcription

1 Heavy Indutrial Shock Aborber CA2 to CA4 Self-Compenating 50 The CA2 to CA4 complete the ACE product range of elf-compenating hock aborber. With thee unit ACE ha a continou range of elf-compenating unit to handle effective weight from 0.3 up to The robut CA erie unit are deigned for really heavy duty application. Damage caued by error in adjutment etting i ruled out by their elf-compenating deign. You can elect the correct model for your application uing the ACE Select i on Program or by uing the capacity chart. In comparion with the earlier SAHS range the CA 2" ha 70% and the new CA 3" 25% higher capacity. The CA unit are maintenance-free and available elf-contained or for ue with an external air/oil tank. Rod Button Return Spring Piton Rod Main Bearing Piton Accumulator Outer Body Preure Chamber with Metering Orifice 50 Poitive Stop: Intall mechanical top 2.5 mm to 3 mm before the end of troke. Impact velocity range: 0.3 m/ up to 5 m/ Operating fluid: Automatic Tranmiion Fluid (ATF) vicoity 42 cst. at 40 C Material: Body and acceorie: Steel with black oxide finih. Piton rod: Steel hardened and chrome plated. Rod end button: Steel hardened with black oxide finih. Return pring: Zinc plated. For optimum heat diipation do not paint outer body. Capacity rating: For emergency ue only application it may be poible to exceed publihed energy per cycle (W 3 ) figure. Pleae conult ACE for further detail. Mounting: In any poition Operating temperature range: -12 C to 85 C On requet: Special oil, or for higher or lower impact velocitie outide range hown above, or other option pleae conult ACE. HYDET ab: Stockholm tel: fax: , Göteborg tel: fax: Malmö tel: fax:

2 Heavy Indutrial Shock Aborber A11/2 to A3 Adjutable The adjutable hock aborber of the ACE product erie A11/2 to A3 cover an effective weight range from 0.3 up to The robut A erie unit are deigned for really heavy duty application. The unit are adjuted by mean of a ocket head crew in the rear end. The adjutable A erie can replace the older SAHS erie unit with the ame mounting dimenion. (Ak ACE for aitance.) The A unit are maintenance-free and elf-contained. Rod Button 51 Return Spring Piton Rod Main Bearing Piton Accumulator Outer Body Preure Chamber with Metering Orifice Poitive Stop: Intall mechanical top 2.5 mm to 3 mm before the end of troke. Adjutment: Turning the adjutment crew toward 0 make the unit harder and toward 9 make it ofter. Impact velocity range: 0.1 up to 5 m/ Operating fluid: HLP 46 vicoity 46cSt. at 40 C Material: Body and acceorie: Steel with black oxide finih. Piton rod: Steel hardened and chrome plated. Rod end button: Steel hardened with black oxide finih. Return pring: Zinc plated. For optimum heat diipation do not Adjutment paint outer body. Capacity rating: For emergency ue only application it may be poible to exceed publihed energy per cycle (W 3 ) figure. Pleae conult ACE for further detail. Mounting: In any poition Operating temperature range: -12 C to 85 C On requet: Special oil, or for higher or lower impact velocitie outide range hown above, or other option pleae conult ACE. HYDET ab: Stockholm tel: fax: , Göteborg tel: fax: Malmö tel: fax:

3 Heavy Indutrial Shock Aborber A11/2 Adjutable 52 Rear Flange -R Front Flange -F Hub 102 L1 Ø13 19 L2 Hub 102 Ø13 Clevi Mounting -C Foot Mounting -S ,8 Ø 19,1 Ø 19,1 19 L5 min max 16 15, L4 Hub L Ø13 Due to limited force capacity the repective ability hould be reviewed by ACE. Foot mounting not available on 2" troke model. Intall mechanical top 2.5 mm to 3 mm before the end of troke. Ordering Example Adjutable Bore Size Ø 11/2" Length 2" = 50.8 mm Rear Flange Mounting Dimenion A 11/2 x 2 R Model Prefix A = elf-contained with return pring (Thi i tandard model) AA = air/oil return without return pring. A = elf-contained without return pring SA = SA air/oil return with return pring. mm L1 L2 L3 L4 L5 A11/2x A11/2x31/ A11/2x A11/2x61/ Capacity Chart m/cycle Self-Contained with Air/Oil Tank 1 Effective me me min. me max. Min. Return Max. Return Rod Reet Time Max. Side Load Angle A11/2x A11/2x31/ A11/2x A11/2x61/ The effective weight range limit can be raied or lowered to pecial order. 2 For emergency ue only application it may be poible to exceed thee max. capacity rating. Pleae conult ACE for further detail. 3 Figure for oil recirculation ytem on requet. 52 HYDET ab: Stockholm tel: fax: , Göteborg tel: fax: Malmö tel: fax:

4 Heavy Indutrial Shock Aborber CA2 and A2 Self-Compenating and Adjutable Rear Flange -R Front Flange -F Ø35 Ø17 Ø17 E M100x2 19 Hub 19 B max A max Ø 108 (120) A max B max Eintellchraube A2 Adjuter model A2 only Dimenion in ( ) for model A2 only Adjuter Eintellchraube model A2 only A2 Foot Mounting S C D max Ø Adjuter Eintellchraube model A2 only A2 Dimenion of clevi mounting available on requet. OTE! For replacement of exiting SAHS 2" foot mounted unit order the old type foot mounting S2-A. Ordering Example Self-Compenating Bore Size Ø 2" Length 4" = 102 mm Effective Range Verion Front Flange Mounting Dimenion CA 2 x 4-3 F Model Prefix A, CA = elf-contained with return pring (Thi i tandard model) AA, CAA = air/oil return without return pring. A, CA = elf-contained without return pring SA, CSA = air/oil return with return pring. A max B max C D max E mm 2x x x x x Capacity Chart CA2 m/cycle Self- Contained with Air/Oil Tank 1 Effective me Soft Hard min max min max min max min max Min. Return Max. Return Rod Reet Time Max. Side Load Angle CA2x CA2x CA2x CA2x CA2x Capacity Chart A2 m/cycle Self-Contained with Air/Oil Tank 1 Effective me me min. me max. Min. Return Max. Return Rod Reet Time Max. Side Load Angle A2x A2x A2x A2x A2x The effective weight range limit can be raied or lowered to pecial order. 2 For emergency ue only application it may be poible to exceed thee max. capacity rating. Pleae conult ACE for further detail. 3 Figure for oil recirculation ytem on requet. HYDET ab: Stockholm tel: fax: , Göteborg tel: fax: Malmö tel: fax:

5 Heavy Indutrial Shock Aborber CA3 and A3 Self-Compenating and Adjutable 54 Rear Flange -R Front Flange -F Ø 45 Ø 17 Ø M130x Hub 25 B max A max 136,5 165 Ø 140 (155) A max B max 136,5 165 Adjuter Eintellchraube Model A3 only A3 Dimenion in ( ) for model A3 only Adjuter Eintellchraube Model A3 only A3 Foot Mounting S C D max Ø Eintellchraube A3 Adjuter Model A3 only Dimenion of clevi mounting available on requet. OTE! For replacement of exiting SAHS 3" foot mounted unit pleae conult ACE. Ordering Example Adjutable Bore Size Ø 3" Length 8" = 203 mm Rear Flange Mounting Dimenion A 3 x 8 R Model Prefix A, CA = elf-contained with return pring (Thi i tandard model) AA, CAA = air/oil return without return pring. A, CA = elf-contained without return pring SA, CSA = air/oil return with return pring. A max B max C D max mm 3x x x Capacity Chart CA3 m/cycle Self- Contained with Air/Oil Tank 1 Effective me Soft Hard min max min max min max min max Min. Return Max. Return Rod Reet Time Max. Side Load Angle CA3x CA3x CA3x Capacity Chart A3 m/cycle Self-Contained with Air/Oil Tank 1 Effective me me min. me max. Min. Return Max. Return Rod Reet Time Max. Side Load Angle A3x A3x A3x The effective weight range limit can be raied or lowered to pecial order. 2 For emergency ue only application it may be poible to exceed thee max. capacity rating. Pleae conult ACE for further detail. 3 Figure for oil recirculation ytem on requet. 54 HYDET ab: Stockholm tel: fax: , Göteborg tel: fax: Malmö tel: fax:

6 Heavy Indutrial Shock Aborber CA4 Self-Compenating Rear Flange -R Front Flange -F Ø 54 (63,5) Ø 114 (127) 38 Ø 190 A max Dimenion in ( ) for model CA4x16 only B max Ø 27 C max 38 D max Ø Tapped Hole (Primary Mounting) FRP Foot Mounting -S Ø /2"-11 PT 10 C max B max x 60 Thread Gewinde 5/8"-18 UF Ø E F max Dimenion of clevi mounting available on requet. Ordering Example Self-Compenating Bore Size Ø 4" Length 8" = 203 mm Effective Range Verion Rear Flange Mounting Dimenion CA/CSA CA 4 x 8-5 R Model Prefix CA = elf-contained with return pring (Thi i tandard model) CAA = air/oil return without return pring. CA = elf-contained without return pring CSA = air/oil return with return pring. A B C D E F mm 4x x x Dimenion CAA A B C D E F mm 4x x x Capacity Chart CA4 m/cycle W 4 Self- Contained W 4 with Air/Oil Tank W 4 with Oil Recirculation 1 Effective me Soft Hard min max min max min max Min. Return Max. Return Rod Reet Time CA4x CA4x CA4x Ak The effective weight range limit can be raied or lowered to pecial order. 2 For emergency ue only application it may be poible to exceed thee max. capacity rating. Pleae conult ACE for further detail. HYDET ab: Stockholm tel: fax: , Göteborg tel: fax: Malmö tel: fax:

7 Intallation Example 56 1 ACE Shock aborber for pneumatic cylinder For: optimum deceleration higher peed maller cylinder reduced air conumption maller valve and pipework Example: MA3350-Z (cylinder mounting) Seal with Teflon tape or ealant With heavy load or high velocitie normal cylinder cuhion are often overloaded. Thi caue hock loading leading to premature cylinder failure or exceive maintenance. Uing overized cylinder to withtand thi hock loading i not the bet olution ince thi coniderably increae air conumption and cot. 2 Side load adaptor for high ide load angle R The ide loading i removed from the hock aborber piton rod leading to coniderably longer life. See page 34 and 45 for more detail. α 3 Undamped free travel with damped end poition 3 Free travel The lever 1 wing with the pin 2 in a lotted hole around pivot point 3. The lever i moothly decelerated at the extreme end of it travel One hock aborber for both end of travel Pivot point of lever It i poible to ue only one hock aborber for both end poition by uing different pivot point a hown. Tip: Leave approx. 1.5 mm of hock aborber troke free at each end of travel. Shock aborber troke Shock aborber troke 5 Double acting hock aborber 6 Air bleed collar With a little additional work a normal unidirectional hock aborber can be converted to work in 2 direction by uing a mechanim a hown. By uing the air bleed adaptor the operating lifetime of hock aborber in aggreive environment can be coniderably increaed. The adaptor protect the hock aborber eal from cutting fluid, cleaning agent, cooking oil etc. by uing a low preure air bleed. For more detail ee page HYDET ab: Stockholm tel: fax: , Göteborg tel: fax: Malmö tel: fax:

8 Intallation Example 7 Double troke length 50 % lower reaction force (Q) 50 % lower deceleration (a) By driving 2 hock aborber againt one another noe-to-noe, the effective troke length can be doubled Ride over latch 8.1 The latch aborb the kinetic energy o that the object contact the fixed top gently. 8.2 The latch aborb the rotational energy of the turntable etc. The turntable can then be held in the datum poition with a lock bolt or imilar. 9 Rotary actuator or rack and pinion drive The ue of ACE hock aborber allow higher operating peed and weight a well a protecting the drive mechanim and houing from hock load. 10 Adjutable top clamp e.g. for handling equipment The gentle deceleration of ACE hock aborber make the ue of adjutable top clamp poible and remove any chance of the clamp lipping. The kinetic energy i completely removed before the mechanical top i reached thu making high index peed poible. 11 Ride-over latch e.g. fire door 12 Increaing troke length mechanically Door Safety travel (prevent tapping) The fire door travel quickly until it reache the lever. It i then gently decelerated by the lever mounted hock aborber and cloe without hock or danger to peronnel. By mean of a lever the effective troke length can be increaed and mounting pace to the left reduced. HYDET ab: Stockholm tel: fax: , Göteborg tel: fax: Malmö tel: fax:

9 Miniature Shock Aborber Application Example 58 ACE miniature hock aborber are the right alternative. Thi pneumatic module for high preciion, high peed motion intentionally abandoned pneumatic end-oftravel damping. The compact miniature hock aborber of the type MC25MH-B decelerate the linear motion afer and fater when reaching the end-oftravel poition. They accept the moving load gently and decelerate it moothly throughout the entire troke length. Additional advantage: impler contruction, maller pneumatic valve, lower maintenance cot a well a reduced compreed air conumption. Contant reiting force Miniature hock aborber in linear pneumatic module ACE miniature hock aborber optimie production with minimum expenditure. The cycle rate for an aembly line producing electronic component wa increaed to 3600 unit/hr by uing ACE hock aborber. Miniature hock aborber type SC190M-1 decelerate the rapid tranfer movement on the production line and uing oft damping method optimie the pick up and et down of component. Thi oft deceleration technique ha increaed production and reduced maintenance on the portal and rotary actuator module. The optional ide load adaptor protect the hock aborber from high ide load force and increae the operating lifetime. Uing ACE hock aborber reduce maintenance cot by 50% and running cot by 20%, diminihing energy conumption. α Soft end-of-travel damping on rotary movement R Optimied production in the electronic indutry 58 HYDET ab: Stockholm tel: fax: , Göteborg tel: fax: Malmö tel: fax:

10 Indutrial Shock Aborber Application Example ACE indutrial hock aborber offer afety to pare for wiveling or braking of large telecope. The optical ytem ot thi telecope for pecial obervation i moveable in two pace coordinate. The tructure in which the telecope i mounted weigh and conit of a turntable with drive and two wheel dik rotating on bearing. It enable a rotation by ± 90 from horizon to horizon. To afeguard the telecope in cae of overhooting the repective wiveling limit, indutrial hock aborber of the type ML3325M are ued a braking element. Should the telecope inadvertently overhoot the permiible wivel range, they will afely damp the travel of the valuable telecope. 59 Safe wiveling Perfect overhoot protection for preciion telecope ACE indutrial hock aborber optimize portal for machine loading and increae productivity. Thi device driven by piton rod-le pneumatic cylinder, in which two gripper lide are moving independently of each other at peed of 2 to 2.5 m/ec., i equipped with indutrial hock aborber a brake ytem. Their function i to top a ma of 25 up to 540 time per hour. The model MC3350M-1-S wa choen for thi application, allowing eay and extremely accurate adjutment of the end poition of the adjutable limit top. In comparion to brake ytem with other function principle, hock aborber allow higher travel peed and horter cycle equence. Quicker, gentle poitioning Indutrial hock aborber optimize portal operation HYDET ab: Stockholm tel: fax: , Göteborg tel: fax: Malmö tel: fax: