Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
|
|
|
- Magdalen Ellis
- 5 years ago
- Views:
Transcription
1 Type 437 Safety Relief Valve pring loaded Metric + US Unit Fact The-Safety-Valve.com
2 Deign 40 Cap H2 18 Adjuting crew with buhing 19 Lock nut 16 Spring plate 12 Spindle 54 Spring Axial needle 69 beering 2 Outlet body 17 Spring plate 57 Pin 61 Ball 7 Dic 1 Body Threaded connection Outlet flange 2.4 Threaded connection Outlet adaptor 2.1 Inlet flange 48 Flange connection 8
3 Material Material Item Component Deign Bae/Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection 7 Dic 12 Spindle 3) 16/17 Spring plate 3) 18 Adjuting crew with buhing 19 Lock nut 40 Cap H2 Long Verion 48 Inlet flange Flange connection 54 Spring 57 Pin 61 Ball 69 Axial needle beering ) 4), SA ) 4), SA 479 SA 479 SA 479 SA ), tellited tellited SA ), SA 479 tellited SA 479 tellited ) SA ) SA Hardened tainle teel SA d 0 6: tellited d 0 10: d 0 6: tellited d 0 10: d 0 6: tellited d 0 10: HSS 5) d 0 6: tellited d 0 10: Ti Ti 316Ti Chrome teel / PTFE / PTFE Chrome teel / PTFE / PTFE teel SA Stainle teel Stainle teel Stainle teel Stainle teel Hardened tainle teel 316 Pleae notice: Modification reerved by LESER. LESER can upgrade material without notice. Every part can be replaced by other material acc. to cutomer pecification. The material hall meet the requirement of the relevant regulation (Preure Equipment Directive (PED), acc. to PED applied harmonized tandard, AD 2000-Merkblätter, VdTÜV (Werktoffblätter) a well a further material lited in Section 8 of the Type-Examination. 1) Only for male thread DIN ISO G 3 /8, G 1 / 2, G 3 / 4 (Option Code V49, V54, V55). 2) Only for d 0 10 with male thread DIN ISO G 3 / 8, G 1 / 2, G 3 / 4 (Option Code V49, V54, V55). 3) The item 12 and 17 are combined to one unit. 4) Material / for ASME application (Option code N68 or N70) 5) Hardened tainle teel 9
4 Article number Metal eat Article number Actual Orifice diameter d 0 [mm] Actual Orifice area A 0 [mm 2 ] Actual Orifice diameter d 0 [inch] Actual Orifice area A 0 [inch 2 ] Bae / Inlet body material: (430) 1) H2 Art. No ) H3 Art. No ) p max. = 16 bar g 2603 H4 Art. No ) p [barg] S/G/L S/G S/G/L p [pig] S/G/L S/G S/G/L Bae / Inlet body material: () H2 Art. No H4 Art. No p [barg] S/G/L S/G S/G/L p [pig] S/G/L S/G S/G/L ) Material / for ASME application (Option code N68 or N70). 2) 3 hould not be elected when a tainle teel valve i required due to corroive medium. 10
5 Dimenion and weight Threaded connection [Metric unit] Threaded connection Size Outlet body / 2 " 3 / 4 " 1" 1 / 2 " 3 / 4 " 1" 1 / 2 " 3 / 4 " 1" Actual Orifice diameter d 0 [mm] Actual Orifice area A 0 [mm 2 ] Weight [kg] Required intallation diameter d [mm] Inlet thread female Size outlet body 1 / 2 " 3 / 4 " 1" 1 / 2 " 3 / 4 " 1" 1 / 2 " 3 / 4 " 1" Center to face [mm] DIN ISO G ISO 7-1/BS 21 Rc Inlet 1 / 2 " a ASME B NPT Inlet 3 / 4 ", 1" a Outlet b Height [mm] Inlet 1 / 2 " H max Inlet 3 / 4 ", 1" H max Inlet thread male Size outlet body 1 / 2 " 3 / 4 " 1" 1 / 2 " 3 / 4 " 1" 1 / 2 " 3 / 4 " 1" Center to face [mm] DIN ISO G Inlet a Outlet b ISO 7-1/BS 21 R ASME B NPT Inlet a Outlet b Height [mm] Size inlet thread / 8 " 1 / 2 " 3 / 4 " 1" 3 / 8 " 1 / 2 " 3 / 4 " 1" DIN ISO G H max ISO 7-1/BS 21 R H max ASME B NPT H max Length of crewed end c [mm] Size inlet thread 3 / 8 " 1 / 2 " 3 / 4 " 1" DIN ISO G ISO 7-1/BS 21 R ASME B NPT d Required intallation diameter female thread male thread male thread 11
6 Dimenion and weight Threaded connection [US unit] Threaded connection Size Outlet body / 2 " 3 / 4 " 1" 1 / 2 " 3 / 4 " 1" 1 / 2 " 3 / 4 " 1" Actual Orifice diameter d 0 [inch] Actual Orifice area A 0 [inch 2 ] Weight [lb] Required intallation diameter d [inch] 2 9 / / / / / / / / / 32 Inlet thread female Size outlet body 1 / 2 " 3 / 4 " 1" 1 / 2 " 3 / 4 " 1" 1 / 2 " 3 / 4 " 1" Center to face [inch] DIN ISO G ISO 7-1/BS 21 Rc Inlet 1 / 2 " a 1 13 / / / / / / / / / 16 ASME B NPT Inlet 3 / 4 ", 1" a 2 7 / / / / / / / / / 16 Outlet b 1 3 / / / / / / / / / 32 Height [inch] Inlet 1 / 2 " H max. 8 7 / / / / / / / / / 16 Inlet 3 / 4 ", 1" H max. 8 5 / / / / / / / / / 16 Inlet thread male Size outlet body 1 / 2 " 3 / 4 " 1" 1 / 2 " 3 / 4 " 1" 1 / 2 " 3 / 4 " 1" Center to face [inch] DIN ISO ISO 7-1/BS 21 ASME B Height [inch] G R NPT Inlet a 1 5 / / / / / / / / / 32 Outlet b 1 3 / / / / / / / / / 32 Inlet a 1 7 / / / / / / / / / 32 Outlet b 1 3 / / / / / / / / / 32 Size inlet thread 3 / 8 " 1 / 2 " 3 / 4 " 1" 3 / 8 " 1 / 2 " 3 / 4 " 1" DIN ISO G H max. 8 3 / / / / / / / 8 ISO 7-1/BS 21 R H max. 8 3 / / / / / / 32 ASME B NPT H max. 8 1 / / / / / / 32 Length of crewed end c [inch] Size inlet thread 3 / 8 " 1 / 2 " 3 / 4 " 1" DIN ISO G 15 / 32 9 / 16 5 / 8 23 / 32 ISO 7-1/BS 21 R 3 / 4 25 / / 32 ASME B NPT 7 / 8 7 / / 16 d Required intallation diameter female thread male thread male thread 12
7 Dimenion and weight Flanged connection [Metric unit] Flanged connection Actual Orifice diameter d 0 [mm] Actual Orifice area A 0 [mm 2 ] DIN EN (Available flange ize refer to page 04/05) Flange rating cla PN 40 Center to face [mm] Inlet a Outlet b Height [mm] H max Flange rating cla PN 160 Center to face [mm] Inlet a Outlet b Height [mm] H max ASME B 16.5 (Available flange ize refer to page 04/05) Flange rating cla 150 Center to face [mm] Inlet a Outlet b Height [mm] H max Flange rating cla 300 Center to face [mm] Inlet a Outlet b Height [mm] H max Note The outlet dimenion b can differ at pecial combination of nominal diameter and preure range if flanged connection are ued at the inlet and outlet. Special dimenion are poible. More information at ale@leer.com Weight To calculate the total weight ue the formula: mt = m N + m F (Inlet) + m F (Outlet) Weight net [kg] (without inlet and outlet flange) m N Flange dimenion DIN EN / Flange rating PN ASME B16.5 / Flange rating Size Size DN 15 NPS 1 / 2 " Flange thickne [mm] Weight lip on flange [kg] m F DN 20 NPS 3 / 4 " Flange thickne [mm] Weight lip on flange [kg] m F DN 25 NPS 1" Flange thickne [mm] Weight lip on flange [kg] m F a b 13
8 Dimenion and weight Flanged connection [US unit] Flanged connection Actual Orifice diameter d 0 [inch] Actual Orifice area A 0 [inch 2 ] DIN EN (Available flange ize refer to page 39) Flange rating PN 40 Center to face [inch] Inlet a 4 1 / / / 16 Outlet b 3 15 / / / 16 Height [inch] H max / / / 16 Flange rating PN 160 Center to face [inch] Inlet a 4 1 / / / 16 Outlet b 3 15 / / / 16 Height [inch] H max / / / 16 ASME B 16.5 (Available flange ize refer to page 39) Flange rating cla 150 Center to face [inch] Inlet a 4 1 / / / 16 Outlet b 3 15 / / / 16 Height [inch] H max / / / 16 Flange rating cla 300 Center to face [inch] Inlet a 4 1 / / / 16 Outlet b 3 15 / / / 16 Height [inch] H max / / / 16 Note The outlet dimenion b can differ at pecial combination of nominal diameter and preure range if flanged connection are ued at the inlet and outlet. Special dimenion are poible. More information at ale@leer.com Weight To calculate the total weight ue the formula: mt = m N + m F (Inlet) + m F (Outlet) Weight net [lb] (without inlet and outlet flange) m N Flange dimenion DIN EN / Flange rating PN ASME B16.5 / Flange rating Size Size DN 15 NPS 1 / 2 " Flange thickne [inch] 23 / 32 7 / 23 8 / / / 9 16 / / / / / / 16 Weight lip on flange [lb] m F DN 20 NPS 3 / 4 " Flange thickne [inch] 25 / 7 32 / 8 19 / / / / 4 Weight lip on flange [lb] m F DN 25 NPS 1" Flange thickne [inch] 7 / / / / / / / / / / / 16 Weight lip on flange [lb] m F a b 14
9 Preure/temperature rating [Metric unit + US unit] Metric unit Actual Orifice diameter d 0 [mm] 6 10 Actual Orifice area A 0 [mm 2 ] Body material: (430) Bae / Connection ize 3 / 8 " 1 / 2 " 3 / 4 " 1" 3 / 8 " 1 / 2 " 3 / 4 " 1" Inlet Body Preure rating PN 400 PN 320 Outlet body Preure rating PN 160 PN 160 Minimum et preure Maximum et preure p [bar g ] S/G/L 180 [S/G only] 0.1 p [bar g ] S/G/L 365 [S/G only] Temperature min [ C ] -10 acc. to DIN EN max [ C ] [only H3] 180 Temperature min [ C ] -29 acc. to ASME max [ C ] +220 Body material: () Bae / Connection ize 3 / 8 " 1 / 2 " 3 / 4 " 1" 3 / 8 " 1 / 2 " 3 / 4 " 1" Inlet Body Preure rating PN 400 PN 320 Outlet body Preure rating PN 160 PN 160 Minimum et preure p [bar g ] S/G/L 180 [S/G only] 0.1 Maximum et preure p [bar g ] S/G/L 365 [S/G only] 180 Temperature min [ C ] -270 acc. to DIN EN max [ C ] +280 Temperature min [ C ] -268 acc. to ASME max [ C ] +280 US unit Actual Orifice diameter d0 [inch] 0,236 0,394 Actual Orifice area A0 [inch 2 ] 0,044 0,122 Body material: (430) Bae / Inlet Body Minimum et preure Connection ize 3 / 8 " 1 / 2 " 3 / 4 " 1" 3 / 8 " 1 / 2 " 3 / 4 " 1" p [pig] S/G/L Maximum et preure p [pig] S/G/L 5294 Temperature min [ F ] +14 acc. to DIN EN max [ F ] +428 Temperature min [ F ] -20 acc. to ASME max [ F ] +428 Body material: () Bae / Inlet Body Minimum et preure 145 [only H3] 2611 Connection ize 3 / 8 " 1 / 2 " 3 / 4 " 1" 3 / 8 " 1 / 2 " 3 / 4 " 1" p [pig] S/G/L Maximum et preure p [pig] S/G/L Temperature min [ F ] -450 acc. to DIN EN max [ F ] +536 Temperature min [ F ] -450 acc. to ASME max [ F ]
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 438 Safety Relief Valve pring loaded Metric + US Unit Fact The-Safety-Valve.com Deign 40 Cap H2 18 Adjuting crew with buhing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 438 Safety Relief Valve pring loaded Metric + US Unit Fact The-Safety-Valve.com Deign 40 Cap H2 18 Adjuting crew with buhing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring
Type 437. Type 437. Available designs. Cap H2 Adjusting screw with bushing. Axial needle 69 beering. Lock nut. Spring plate. Spring plate. Pin.
Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring 2 Outlet body 17 Spring plate 57 Pin 61 Ball 7 Disc 1 Body Threaded
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
Type 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 462 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 459 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
Type 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
Compact. Performance. Safety Relief Valves Series 437 Series 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Series 437 Series 459 EXTENDED CATALOG The-Safety-Valve.com Valve Finder How to find the right Product Group High operating to set pressure ratio, high backpressure
Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
Type 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.04-E Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring plate
Type 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.05-E 462.01-D Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring
Type 427, 429. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 427, 429 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.05-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
Type. 437 Safety Relief Valves spring loaded
Type Packed knob H4 437 Safety Relief Valves spring loaded Packed knob H4 Flanged connection Cap H2 Contents Chapter/Page Materials Available designs 01/02 Available designs materials 01/03 How to order
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
Type 457, 458. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metirc Units LWN E
Type 457, 458 Flanged Safety Relief Valves spring loaded Metirc Units Facts The-Safety-Valve.com LWN 468.10-E 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring
Type. Facts. Flanged Safety Relief Valves spring loaded PMetric + US Units. The-Safety-Valve.com
Type 26 Flanged Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Type 26 Orifice Selection charts 1 x 1 3L x 1 3 x 1 6 x 1 9 x 1 1 x 1 2 x 3 WCB 262.64X 262.646X 262.647X
Compact. Compact Performance CATALOG. LESER worldwide. Performance. Safety Relief Valves Series 437 Series 459
André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch Hong Kong LESER Shenzen, China sales@leserchina.com LESER UK Bristol, United Kingdom sales@leser.co.uk Compact Performance LESER worldwide LESER
Type 459. Type. 459 Safety Relief Valves spring loaded
Type Plain lever H3 459 Safety Relief Valves spring loaded Contents Chapter/Page Cap H2 Materials Available designs 05/02 Available designs materials 05/03 How to order Numbering system 05/04 Article numbers
Type 455, 456. Type 455, 456. Flanged Safety Relief Valves spring loaded
Type 455, 456 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Type 456 Packed lever H4 Closed bonnet Materials 08/02 Balanced bellows design 08/04 How to order Numbering system 08/06 Article
Type. Facts. Flanged Safety Relief Valves spring loaded TMetric + US Units. The-Safety-Valve.com
ype 26 Flanged Safety Relief Valves spring loaded Metric + US Units Facts he-safety-valve.com ype 26 Orifice Selection charts 1 x 1 3L x 1 3 x 1 6 x 1 9 x 1 x 1 2 x 3 WCB 262.67X See 3 x 1 262.676X WC6
Type. Type 457, , 458. Flanged Safety Relief Valves spring loaded
Type Type 458 Packed lever H4 Closed bonnet Conventional design 457, 458 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Materials Conventional design 09/02 Balanced bellows design 09/04
Metallic trip Standard thickne of the metallic trip i 0.2 mm (0.18). MATERIALS FOR METALLIC STRIP ASTM DIN Material No. AISI AISI 316, 316
MS 10 PROPERTIES AND APPLICATION Spiral wound gaket are pecial emi-metallic gaket of great reilience, there fore they are very uitable for application featuring heavy operating condition. Spiral wound
Compact CATALOG. Performance. Safety Relief Valves Series 437 Series 459
Compact Performance Safety Relief Valves Series 437 Series 459 CATALOG The-Safety-Valve.com Product Range LESER Safety Valves for every industrial application Compact Performance High Performance Series
Heavy Industrial Shock Absorbers CA2 to CA4
Heavy Indutrial Shock Aborber CA2 to CA4 Self-Compenating 56 The CA2 to CA4 complete the ACE product range of elf-compenating hock aborber. With thee unit ACE ha a continou range of elf-compenating unit
Industrial Shock Absorbers MC33 to MC64
Indutrial Shock Aborber MC33 to MC64 Self-Compenating Thi range of elf-compenating hock aborber i part of the innovative MAGUM erie from ACE. You profit from the enhanced product life in the mot difficult
Modulate CATALOG. Action. Safety Relief Valves Series 433. The-Safety-Valve.com
Modulate Action Safety Relief Valves Series 433 CATALOG The-Safety-Valve.com Valve finder General How to find the right Product Group High operating to set pressure ratio, high backpressure or low total
Industrial Shock Aborbers MA and ML33 to 64
Indutrial Shock Aborber MA and ML33 to 64 Thi adjutable hock aborber from ACE i unique. The innovative MAGUM erie model provide the next generation of deceleration technology to meet the need of the future.
Clean Service CATALOG. Safety Relief Valves Series 48X. The-Safety-Valve.com
Clean Service Safety Relief Valves Series 48X CATALOG The-Safety-Valve.com Valve finder Product group High operating to set pressure ratio, high backpressure or low total height? Yes High Efficiency Mediumcontrolled
API CATALOG. Flanged Safety Relief Valves Series 526. The-Safety-Valve.com
API Flanged Safety Relief Valves Series 526 CATALOG The-Safety-Valve.com NH 3 HCL Product Range LESER Safety Valves for every industrial application API High Performance Series 526 Type 526 Compact Performance
Spring Loaded Safety Valve. SiC 11/13/14
Spring Loaded Safety Valve SiC 11/13/14 General Features and Benefits Acc. Directive 97/23/EC of the European Parliament and the Council of 29 May 1997 on the approximation of the laws of the Member States
Underground ball valves JIP for pre-insulation
Data heet Decription Danfo JIP underground ball valve are deigned for ditrict heating ytem and other cloed loop water ytem where the water i treated to avoid internal corroion. aving a fully welded body,
Hygiene Right Angle Control Valve 6020
N 15 up to N 4 with integrate igital poitioner for application in foo proceing (Type 847, 849) Pneumatic control valve with right angle boy eign an integrate poitioner for application in foo proceing an
PPN Piping System. Cost Effective Purity
PPN Piping Sytem Cot Effective Purity 45 - Specification PolyPure Natural Polypropylene (PPn) High Purity Piping Sytem REV:HP0512PN Material: ASTM D4101 Group 2, Cla 1 natural polypropylene random copolymer
LORO-X Downpipes (Art.-No. and dimensions see pages 22-39) LORO-X Sealing elements (Art.-No. and dimensions see page 27)
Application LORO-Standpipe LORO-X Downpipe (Art.-No. and dimenion ee page 22-39) LORO-X Sealing element (Art.-No. and dimenion ee page 27) LORO-X Offet pipe mit Sprung e = 200mm, 130 mm oder 75 mm (Art.-No.
High CATALOG 1. Performance. Flanged Safety Relief Valves Series 441 Series XXL Series 444. The-Safety-Valve.com
High Performance Flanged Safety Relief Valves Series 441 Series XXL Series 444 CATALOG 1 The-Safety-Valve.com NH 3 HCL Product Range LESER Safety Valves for every industrial application High Performance
High CATALOG 2. Performance. Flanged Safety Relief Valves Series 441 Full nozzle Series 458
High Performance Flanged Safety Relief Valves Series 441 Full nozzle Series 458 CATALOG 2 NH 3 HCL Product Range LESER Safety Valves for every industrial application High Performance Compact Performance
Here are the dimensions for your product group N.
Here are the dimenion for your produt group N. Overview of all dimenion > a i Pump rewed onnetion, length Size a a1 a2 a3 a4 a5 m m1 m2 m3 n n1 n2 n3 3 i 01-48 54 107 598-175 - 42 117-42 16 32-16 12 12
Increased security with the double flange design. Good wear resistance. Maintenance-free and predictable lifetime. Material: iglidur M250
Eay to fit Increaed ecurity with the double flange deign Good wear reitance Maintenance-free and predictable lifetime Material: iglidur M250 Special dimenion are poible 31.3 iglidur Clip Bearing 1 tyle
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
Heavy Industrial Shock Absorbers CA2 to CA4
Heavy Indutrial Shock Aborber CA2 to CA4 Self-Compenating 50 The CA2 to CA4 complete the ACE product range of elf-compenating hock aborber. With thee unit ACE ha a continou range of elf-compenating unit
Clean Service CATALOG. Safety Relief Valves Series 48X. The-Safety-Valve.com
Clean Service Safety Relief Valves Series 48X CATALOG The-Safety-Valve.com Valve finder Product group High operating to set pressure ratio, high backpressure or low total height? Yes High Efficiency Mediumcontrolled
Type Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent
VALSTAR VALVE. The triple offset - metal Seated high-performance butterfly valve
. VALTAR. VALVE The triple offset - metal eated high-performance butterfly valve 3rd Offset 2nd Offset VALTAR VALVE KEY INFORMATION High performance levels in Control or On/Off service pecific shape of
DOUBLE GIMBAL EXPANSION JOINTS
DOUE GIM EXPNSION JOINS Scan thi QR 64 NSI DIN EN +600 C Gimbal type expanion joint are deigned to permit angular rotation in any plane by the ue of two pair of hinge affixed to a common floating gimbal
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
Type 526 IC CATALOG. Flanged Safety Relief Valves API Series. The-Safety-Valve.com
Type 526 IC Flanged Safety Relief Valves API Series CATALOG The-Safety-Valve.com General Information Overview API safety valves (LESER Type 526) are flanged safety valves that meet all the requirements
-Super Proline Chemical Grade PVDF
EFFECTIVE: 5/26/10 Indutrial Piping Sytem Dimenional Guide #SPDIM Super Proline -Super Proline 3 r z www.aahi-america.com Dimenion ubject to change without notice, conult Aahi/America Engineering Department
ELECTROMAGNETIC SINGLE-DISC CLUTCHES
ELECTROMAGNETIC SINGLE-DISC CLUTCHES Type EBA & EBK EBA EBK Catalogue No. : V/C/14/01 Optional On Requet 01 02 03 04 05 06 07 Part No Decription 01 Rivet 02 Spring plate 03 Armature plate 04 Friction plate
Best CATALOG. Availability. Change-over valves. Type 310 Type 311 XXL
Best Availability Change-over valves Type 310 Type 311 XXL CATALOG NH 3 HCL Product overview LESER Change-over and safety valves for any industrial application Best Availability Change-over valves High
High CATALOG 1. Performance. Flanged Safety Relief Valves Series 441 Series XXL Series 444
High Performance Flanged Safety Relief Valves Series 441 Series XXL Series 444 CATALOG 1 Product Range LESER Safety Valves for every industrial application High Performance Compact Performance Series 441
WP9LM. Specifications. WARP9 - Large, magnetic revision 10/20/16 kl_wp9lm_spec.pdf. Type: Job: Catalog number: Approvals: Date: Page: 1 of 5
Catalog number: WP9LM reviion 10/20/16 kl_wp9lm_pec.pdf Approval: / / / / Mtg. Fixture Electrical Module Finih Option See page 4-5 See page 2 See page 3 Select pole from Kim Pole Catalog. If pole i provided
Pigmented Polypropylene. Piping System
Pigmented Polypropylene Piping Sytem Photo courtey of Agape Water Solution Inc. 75 - Specification PP-Pure Pigmented Polypropylene (PP) High Purity Piping Sytem REV:HP0512PP Material: ASTM D4101 Group
API Flanged Safety Relief Valves Series 526 API CATALOG. LESER worldwide. The-Safety-Valve.com. The-Safety-Valve.com
LESER UK Bristol, United Kingdom sales@leser.co.uk André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch API LESER worldwide Hong Kong LESER Shenzen, China sales@leserchina.com API Flanged Safety Relief
Best CATALOG. Availability. Change-over valves. Type 310. The-Safety-Valve.com
Best Availability Change-over valves Type 310 CATALOG The-Safety-Valve.com N H 3 H C L Product overview LESER Change-over and safety valves for any industrial application Best Availability Change-over
Industrial Shock Absorbers
48 Automation Control Indutrial Shock Aborber Aborber to uit for all load ACE indutrial hock aborber work hard. Their application mean moving load are evenly decelerated over the full troke. The reult:
Best Availability. LESER Change-over Valves Type 330, Type 320. The-Safety-Valve.com
Best Availability LESER Change-over Valves Type 330, Type 320 The-Safety-Valve.com Valve finder Your path to the right product group High operating to set pressure ratio, high backpressure or low total
SR-SAF Ball nose roughing endmill
/ BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.
LESER LLC LESER S.A.R.L.
High LESER worldwide André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch Efficiency Hong Kong LESER Shenzen, China sales@leserchina.com Pilot Operated Safety Valves LESER UK Bristol, United Kingdom
A ir can accumulate in a sewage collection system that is
The & U eries ewage Air Valves Helps Prevent ystem hutdown tandard and High Capacity eries Available eries Includes Air & Vacuum and Pressure Combination Units Crispin ince 1905 Crispin Multiplex Manufacturing
Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
Modulate CATALOG. LESER worldwide. Action. Safety Relief Valves Series 433 Series 429. Modulate Action. The-Safety-Valve.com. The-Safety-Valve.
André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch Hong Kong LESER Shenzen, China sales@leserchina.com Modulate Action LESER worldwide LESER UK Bristol, United Kingdom sales@leser.co.uk LESER Polska
Modulate CATALOG. LESER worldwide. Action. Safety Relief Valves Series 433 Series 429. Modulate Action. The-Safety-Valve.com. The-Safety-Valve.
LESER UK Bristol, United Kingdom sales@leser.co.uk LESER Germany Hamburg and Hohenwestedt sales@leser.com André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch LESER China Tianjin, Bejing, Shanghai and
High CATALOG. Efficiency. Pilot Operated Safety Valves Series 810 Pop Action Series 820 Modulate Action. The-Safety-Valve.com
High Efficiency Pilot Operated Safety Valves Series 10 Pop Action Series 20 Modulate Action CATALOG The-Safety-Valve.com Valve finder How to find the right product group High operating to set pressure
SECTION TWO - INTERMODAL - VENTING
PEROLO MULTI-SUPERVENTIX SRV KEY PART NUMBER DESCRIPTION 5A PER-11100195 PEROLO SRV SPRING SET, 2.18 BAR 5-6 PER-11100196 PEROLO SRV SPRING SET, 3.75 BAR 5-6 PER-11100197 PEROLO SRV SPRING SET, 4.40 BAR
Industrial Shock Absorbers MC33 to MC64
Indutrial Shock Aborber MC33 to MC64 40 Thi range of elf-compenating hock aborber i part of the innovative MAGUM erie from ACE. You profit from the enhanced product life in the mot difficult operating
Working pressure; connection PS1-E101
PDE2600PNUK Interface - PS1 Serie (IGH SPEED POPPET TYPE SOLENOID VALVES WITH INDIVIDUAL ELECTRICAL CONNECTIONS,IGHT WEIGHT PLASTIC BODIES WITH $). RAIL MANIFOLD )DEAL FOR cabinet intallation. (IGH SPEED
Protection Systems. 3-Way Directional Valve P/N: XX-00X. A UTC Fire & Security Company FEATURES
Effective: Nov. 2010 Fenwal Phoenix Directional Valve P/N: 93-2200XX-00X TM R Protection ystems A UTC Fire & ecurity Company F-93-121 FEATURE For use with Fenwal Phoenix ystems Cost-Effective Option for
Two-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
Protection Systems. 3-Way Directional Ball Valve P/Ns: X and X. A UTC Fire & Security Company FEATURES
Effective: April 2007 Fenwal Phoenix 3-Way Directional Ball Valve P/Ns: 93-118325-00X and 93-118327-00X TM R Protection ystems A UTC Fire & ecurity Company F-93-120 FEATURE For use with Fenwal Phoenix
FAR51. Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications
f ti r : FAR51 Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications Application Process adapter for the microwave barriers
Helps Prevent System Shutdown Standard and High Capacity Series Available Series Includes Air & Vacuum and Pressure Combination Units.
The & U eries ewage Air Valves Helps Prevent ystem hutdown tandard and High Capacity eries Available eries Includes Air & Vacuum and Pressure Combination Units Crispin ince 1905 Crispin Multiplex Manufacturing
TRIMOTERM FIREPROOF PANELS PRODUCT RANGE
TRIMOTERM FIREPROOF PANELS PRODUCT RANGE TRIMOTERM FIREPROOF FAÇADE PANELS Trimoterm FTV EN 149 Trimoterm FTV fireproof panel are ued for a wide range of external façade cladding, internal partition wall,
SUITABLE FOR. Steam EXAMPLES OF USE APPROVALS. Type approval WRAS. Type approval ACS. Requirements DIN EN ISO PED 2014/68/EU TRD 421
Type test approved safety valves angle-type for industrial applications Series 642 642 Safety valves made of gunmetal, angle-type with threaded or flange connections SUITABLE FOR Liquids neutral and non-neutral
Compact. performance. Threaded Safety Relief Valves. Series 437 Type Series 459 Type CATALOG.
Compact performance Threaded Safety Relief Valves Series 437 Type 437 438 439 Series 459 Type 459 46 CATALOG The Safety Valve Series 459 Packed lever H4 Series 459 Balanced bellows design Series 459 Cap
High. Efficiency. Facts. LESER worldwide. Pilot Operated Safety Valves. Series 810 Pop Action US Units. The-Safety-Valve.com. The-Safety-Valve.
High LESER worldwide André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch Efficiency Hong Kong LESER Shenzen, China sales@leserchina.com Pilot Operated Safety Valves LESER UK Bristol, United Kingdom
94D / 94F / 94M / 96M
94D / 94F / 94M / 96M - 2016 1 Meter Runs MBL 500 Application Meter runs combine inlet and outlet piping with a flow element which is used for flow measurement of one-phase aggressive and non-aggressive
Type 441 CATALOG. Flanged Safety Relief Valves. The-Safety-Valve.com
Type 441 Flanged Safety Relief Valves CATALOG The-Safety-Valve.com General Information LESER India Safety Relief Valves The safety valve Type 441 represents High capacity related to the safety valve size
3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
CHE302 LECTURE III ACTUATOR AND CONTROL VALVE SELECTION. Professor Dae Ryook Yang INTRODUCTION TO ACTUATOR
CHE30 LECTURE III ACTUATOR AND CONTROL VALVE SELECTION Profeor Dae Ryook Yang Fall 001 Dept. of Chemical and Biological Engineering Korea Univerity CHE30 Proce Dynamic and Control Korea Univerity 3-1 INTRODUCTION
CLS Series. Compact Linear motor Stage. Patent pending CLS-01-O81-EN
CLS Serie Compact Linear motor Stage cpc reerve the right to revie any information(technical detail) any time without notice, for printing mitake or any other incidental mitake. We take no reponibility.
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE HIGH PRESSURE MATERIAL REGULATOR
OPERATOR MANUAL INCLUDING: OPERATION, INTALLATION & MAINTENANCE HIGH PREURE MATERIAL REGULATOR RELEAED: 7-20-14 (REV. A) READ THI MANUAL CAREFULLY BEFORE INTALLING, OPERATING OR ERVICING THI EQUIPMENT.
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
Custom Exhibits - Champion Exhibits
Cutom Exhibit - Champion Exhibit Champion Exhibit i here to erve you. Think of our team a your peronal all thing tradehow reource! From modular ytem to cutom contruction, Champion Exhibit i geared-up to
High. Efficiency. Pilot Operated Safety Valves Series 810 Pop Action Series 820 Modulate Action. The-Safety-Valve.com
High Efficiency Pilot Operated Safety Valves Series 810 Pop Action Series 820 Modulate Action Extended CATALOG The-Safety-Valve.com Valve finder How to find the right product group High operating to set
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
Angle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
Manifold Accessories. Catalog 4190-FP-ACC May 2007
Manifold Accessories Catalog 4190-FP-ACC May 2007 Contents Page 3 Lapped joint tube adaptors (LJ) Page 4 Flange to compression connectors (FC) Page 5 Kidney flanges to compression connectors (KF) Page
PIPING TO HAZARD PIPING TO HAZARD AGENT SOURCE AGENT SOURCE TOP VIEW TOP VIEW
Kidde Engineered Fire uppression ystem Designed for use with 3M Novec 1230 Fire Protection Fluid 3-Way Directional Ball Valve Data heet Effective:March 2005 K-45-9070 FEATURE For use with Kidde Engineered
SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
Quality and Service Worldwide. Clamps
Quality and ervice Worldwide Clamps TANDARD-ERIE ORDER CODE-COMPONENT acc. to DIN 3015, Part 1 DEIGN OPTION Metric Threaded Components tainless teel Components Available 304/316 pecial Materials Available
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
Two-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
Festoon Systems for I-Beams Program
Fetoon Sytem for I-Beam Program 0314 0320 0325 00 2 Content Cable Trolley for Flat Cable Program 0314 4 Fetoon Sytem for Flat Cable... 4 4 Wheel Platic Trolley... 4 3 Wheel Platic Trolley... 5 2 Wheel
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
HIGH PRESSURE TRUNNION BALL VALVES TBV SERIES
HIGH PREURE TRUNNION BALL VALVE TBV ERIE TBV FEATURE On/Off-service ball valve with 2-way pattern Diverter, selector and on/off-service ball valve with 3-way pattern MAWP* 10,000 psi (689 bar) with PEEK