Helps Prevent System Shutdown Standard and High Capacity Series Available Series Includes Air & Vacuum and Pressure Combination Units.
|
|
- Matilda Dean
- 5 years ago
- Views:
Transcription
1 The & U eries ewage Air Valves Helps Prevent ystem hutdown tandard and High Capacity eries Available eries Includes Air & Vacuum and Pressure Combination Units Crispin ince 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA VALV T: (570) F: (570) info@crispinvalve.com
2 Pressure ewer Valves Pressure ewer Valve ERIE 2 Valve Function Exhausts air and gas accumulation to promote system performance and efficiency Helps prevent system shut downs Features Include tandard, high capacity, and short body series available Optional Backflush attachment Available in sizes 2 thru 4 All CRIPIN Air and Vacuum Valves have standard Buna-N seating material with a hore durometer of This standard seat allows drip tight closure beyond 4-5 PIG. Occasionally, a gravity system operates at pressures less than 10 PIG. These applications require a soft seating material which will prevent leakage down to 2 PIG. This soft seating material should not be applied to systems with operating pressures greater than 50 PIG, or high pressure leaks may occur around the seat. tainless teel Trim tandard A ir can accumulate in a sewage collection system that is under pressure from a number of sources. The nature of sewage is such that gas can also be generated and accumulate at the high points in the system. The gas and air accumulation need to be exhausted to promote system performance and efficiency, and help prevent system shut downs. The CRIPIN Pressure ewer Air Release Valves provide a range of air release orifices through 1/2 in diameter. Correct valve sizing can be determined by referring to the sizing section of the CRIPIN Catalog. The CRIPIN standard capacity Pressure ewer Valve weighs only 49 lbs., as compared to the 93 lbs.weight of our standard high capacity series. The light body is designed for a maximum of 300 PIG. cold water working pressure. The standard capacity Pressure ewer Air Release Valves are available with two orifice sizes, as indicated below. Our high capacity ewer Air Release Valves are supplied with standard stainless steel trim. The high capacity pressure sewer air release valves are available with the orifice sizes indicated on page 11 of this section, and are selected according to the operating pressure of the system. If the system dictates specific air release requirements, then the sewer valve should be sized and selected accordingly. tandard Capacity eries Model Inlet Orifice Height NPT Height w/back Width Width w/back Wt. Wt. w/back Flush* Flush* Flush* L20* /2 25 1/4 9 11/ / psi L30* /2 27 1/4 9 11/ / L40* /2 27 5/8 9 11/ / psi * Add a B to the end of model number if a backflush attachment is required. *Other Working Pressures May Be Obtained By Re-sizing Orifice Diameter. Working Pressure ORIFICE DIAMETER MAX. WORKING PREURE 1/2 150 lbs. 7/ lbs. 3/8 250 lbs. 1/4 300 lbs. Crispin Valve, 600 Fowler Ave., Berwick, PA AIR-VALV T: (570) F: (570) info@crispinvalve.com
3 Pressure ewer Valves Pressure ewer Valve hort Pressure ewer eries MODEL INLET OUTLET HEIGHT 20 2 screwed 1/2 screwed 12 1/2 20B 2 screwed 1/2 screwed 16 1/2 The CRIPIN hort ewer Air Release Valve offers the same function as both the tandard Air and Vacuum and Pressure Air Release ewer Valves. The shorter height allows the valve to be used where height restrictions are a problem. *All Crispin valves are hydrostatically tested at 150% of their maximum working pressure. For ease of maintenance, some of the parts are provided as kits or assemblies. Backflush is optional at customer s request. Flush plugs are used when a backflush is not requested. High Capacity eries Parts List PART # ITEM MATERIAL *1N eat PVC *1P eat tainless teel 2 Valve Plunger Buna-N Rubber & / 3 Plunger Nut tainless teel 3W Lock Washer tainless teel 5 Valve Fulcrum tainless teel 6 Valve Lever tainless teel 7 Link tainless teel 8 Ball Fulcrum tainless teel 9 Ball Float tainless teel 9A Float Rod tainless teel 10 Ball Lever tainless teel 11 Bearing Pin tainless teel 12 Bearing Pin tainless teel 13 Bearing Pin tainless teel 14 Nut teel 15 Cotter Pin tainless teel 17 Bolt teel 18 Nut teel 19 Top Cast Iron 20 Flange Cast Iron 21 Body Cast Iron 22 Fulcrum Washer Fibre 22A Fulcrum Washer Fibre 23 eat Gasket Buna-N Rubber 24 Flange Gasket Armstrong N Bolt tainless teel 40 Flush Plug Cast Iron *1B Hose Assembly Cad. Plt. teel & Rubber *2B Nipple teel *3B Nipple teel *4B Nipple teel *5B Ball Valve Brass *6B Ball Valve Brass ERIE Model Inlet Orifice Height Width Height Width Wt. Wt. NPT w/back w/back w/back Flush Flush Flush 20 2 NPT 1/2 25 1/2 10 1/ /4 13 3/ # Flg. 1/2 26 7/ / /4 13 3/ NPT 1/2 25 1/2 10 1/ /4 13 3/ # Flg. 1/2 27 3/ / / / NPT 1/2 25 1/2 10 1/ /2 13 3/ # Flg. 1/2 27 3/8 10 1/ /8 13 3/ # Flg. 1/2 27 7/ / / / Crispin Valve, 600 Fowler Ave., Berwick, PA AIR-VALV T: (570) F: (570) info@crispinvalve.com 3
4 UBMITTAL HEET FOR L ERIE 4 ubmittal heet for Crispin L eries 2 4 Pressure ewer Valve (stan.) (1 of 2) Manufactured in compliance with ANI/AWWA C512 Date: 2016 The Pressure ewer Air Release Valve(s) shall be installed at high points in the line, or at points selected by the engineer, to vent the accumulation of air and other gases with the line under pressure. The valve(s) shall be of the long body design and shall have a orifice with an adjustable Buna-N rubber valve and a sealing face of PVC. The valve(s) shall operate at PIG, and be capable of passing CFM of air. They shall also be NPT screwed or ANI Class (125, 250) flanged connection. They shall have a cast iron body, top and flange, where required, and a stainless steel trim. The valve(s) shall be Crispin Model Pressure ewer Valve(s) as manufactured by Crispin-Multiplex Manufacturing Co., Berwick, PA. Option: The valve(s) shall be supplied with back flushing attachments so that the interior body can be flushed periodically for proper operation. Option: Where pressures are greater than 300 PIG, the valve(s) shall be ANI Class flanged inlet connection, and shall have a (steel, stainless steel, or ductile iron) body, top and inlet flange. tandard operating pressure for Crispin Air Valves is 20 to 150 PIG. Please check one of the following if your operating needs differ: 2 to 40 PIG 151 to 300 PIG pecifications Orifice Options DIAMETER MAX. PREURE DICHARGE RATE 1/4 150 PIG 105 CFM 1/8 300 PIG CFM All Crispin valves are hydrostatically tested at 150% of their maximum working pressure Crispin Valve, 600 Fowler Ave., Berwick, PA AIR-VALV T: (570) F: (570) info@crispinvalve.com
5 ubmittal heet for Crispin L eries 2 4 Pressure ewer Valve (stan.) (2 of 2) Manufactured in compliance with ANI/AWWA C512 Date: 2016 Parts List ITEM DECRIPTION MATERIAL ATM *1N EAT PVC 1784 *1P EAT TAINLE TEEL A582 2 VALVE PLUNGER BUNA-N & TAINLE TEEL D2000/A193 3 NUT TAINLE TEEL A194 3W LOCK WAHER TAINLE TEEL A240 5 VALVE FULCRUM TAINLE TEEL A240 6 VALVE LEVER TAINLE TEEL A582 7 LINK TAINLE TEEL A240 8 BALL FULCRUM TAINLE TEEL A582 9 FLOAT TAINLE TEEL A BALL LEVER TAINLE TEEL A BEARING PIN TAINLE TEEL A BEARING PIN TAINLE TEEL A BEARING PIN TAINLE TEEL A COTTER PIN TAINLE TEEL A BOLT TEEL A NUT TEEL A TOP CAT IRON A126 CL.B 20 FLANGE CAT IRON A126 CL.B 21 BODY CAT IRON A126 CL.B 22 FULCRUM WAHER FIBER D710 22A FULCRUM WAHER FIBER D EAT GAKET BUNA-N RUBBER D FLANGE GAKET ARMTRONG N-8092 N/A 25 BOLT TAINLE TEEL A FLOAT ROD TAINLE TEEL A582 *40 PLUG CAT IRON A126 CL.B Optional Back Flush Components *1B HOE AEMBLY RUBBER, CAD. PLT. TEEL N/A *2B NIPPLE TEEL A312 *4B NIPPLE TEEL A312 *6B BALL VALVE BRA N/A *7B BALL VALVE BRA N/A ize pecifications MODEL INLET IZE OUTLET IZE A B C D WHT. L20 2 NPT 1/2 NPT L20B 2 NPT 1/2 NPT L30 3 NPT 1/2 NPT L30B 3 NPT 1/2 NPT L40 4 NPT 1/2 NPT L40B 4 NPT 1/2 NPT UBMITTAL HEET FOR L ERIE (*) Parts are interchangeable and optional at customer s request. Crispin Valve, 600 Fowler Ave., Berwick, PA AIR-VALV T: (570) F: (570) info@crispinvalve.com 5
6 ubmittal heet for Crispin eries 2 6 Pressure ewer Valve (high) (1 of 2) Manufactured in compliance with ANI/AWWA C512 Date: 2016 UBMITTAL HEET FOR ERIE The Pressure ewer Air Release Valve(s) shall be installed at high points in the line, or at points selected by the engineer, to vent the accumulation of air and other gases with the line under pressure. The valve(s) shall be of the long body design and shall have a orifice with an adjustable Buna-N rubber valve and a sealing face of PVC. The valve(s) shall operate at PIG, and be capable of passing CFM of air. They shall also be NPT screwed or ANI Class (125, 250) flanged connection. They shall have a cast iron body, top and flange, where required, and a stainless steel trim. The valve(s) shall be Crispin Model Pressure ewer Valve(s) as manufactured by Multiplex Manufacturing Co., Berwick, PA. Option: The valve(s) shall be supplied with back flushing attachments so that the interior body can be flushed periodically for proper operation. Option: Where pressures are greater than 300 PIG, the valve(s) shall be ANI Class flanged inlet connection, and shall have a (steel, stainless steel, or ductile iron) body, top and inlet flange. tandard operating pressure for Crispin Air Valves is 20 to 150 PIG. Please check one of the following if your operating needs differ: 2 to 40 PIG 151 to 300 PIG All Crispin valves are hydrostatically tested at 150% of their maximum working pressure. pecifications 40 Orifice Options DIAMETER MAX. PREURE DICHARGE RATE 1/2 150 PIG 420 CFM 7/ PIG 420 CFM 3/8 250 PIG CFM 1/4 300 PIG CFM (*) Parts are interchangable and optional at customer s request (**) Includes ANI CL. 125 companion Flange and Nipple 61 is only available with a Flanged Inlet. 6 Crispin Valve, 600 Fowler Ave., Berwick, PA AIR-VALV T: (570) F: (570) info@crispinvalve.com
7 ubmittal heet for Crispin eries 2 6 Pressure ewer Valve (high) (2 of 2) Manufactured in compliance with ANI/AWWA C512 Date: 2016 Parts List ITEM DECRIPTION MATERIAL ATM *1N EAT PVC 1784 *1P EAT TAINLE TEEL A582 2 VALVE PLUNGER BUNA-N & TAINLE TEEL D2000/A193 3 NUT TAINLE TEEL A194 3W LOCK WAHER TAINLE TEEL A240 5 VALVE FULCRUM TAINLE TEEL A240 6 VALVE LEVER TAINLE TEEL A582 7 LINK TAINLE TEEL A240 8 BALL FULCRUM TAINLE TEEL A582 9 FLOAT TAINLE TEEL A BALL LEVER TAINLE TEEL A BEARING PIN TAINLE TEEL A BEARING PIN TAINLE TEEL A BEARING PIN TAINLE TEEL A NUT TEEL A COTTER PIN TAINLE TEEL A BOLT TEEL A NUT TEEL A TOP CAT IRON A126 CL.B 20 FLANGE CAT IRON A126 CL.B 21 BODY CAT IRON A126 CL.B 22 FULCRUM WAHER FIBER D710 22A FULCRUM WAHER FIBER D EAT GAKET BUNA-N RUBBER D FLANGE GAKET ARMTRONG N-8092 N/A 25 BOLT TAINLE TEEL A FLOAT ROD TAINLE TEEL A582 *40 PLUG CAT IRON A126 CL.B Optional Back Flush Components *1B HOE AEMBLY RUBBER, CAD. PLT. TEEL N/A *2B 1 X CL. NIPPLE TEEL A312 *3B 1 X 3 NIPPLE TEEL A312 4B BOLT TEEL A307 5B NUT TEEL A563 6B BALL VALVE BRA N/A 7B BALL VALVE CAT IRON N/A 8B GAKET ARMTRONG N-8092 N/A ize pecifications MODEL INLET IZE OUTLET IZE A B C D WHT NPT 1/2 NPT B 2 NPT 1/2 NPT ** # FLG 1/2 NPT **21B 2 125# FLG 1/2 NPT NPT 1/2 NPT B 3 NPT 1/2 NPT # FLG 1/2 NPT B 3 125# FLG 1/2 NPT NPT 1/2 NPT B 4 NPT 1/2 NPT # FLG 1/2 NPT B 4 125# FLG 1/2 NPT # FLG 1/2 NPT B 6 125# FLG 1/2 NPT Crispin Valve, 600 Fowler Ave., Berwick, PA AIR-VALV T: (570) F: (570) info@crispinvalve.com UBMITTAL HEET FOR ERIE 7
8 UBMITTAL HEET FOR ERIE 8 ubmittal heet for Crispin eries 2 Pressure ewer Valve (short body) Manufactured in compliance with ANI/AWWA C512 Date: 2016 Parts List ITEM DECRIPTION MATERIAL ATM *1N EAT PVC 1784 *1P EAT TAINLE TEEL A582 2 VALVE PLUNGER BUNA-N RUBBER & / D2000/A193 3 PLUNGER NUT TAINLE TEEL A194 3W LOCK WAHER TAINLE TEEL A240 5 VALVE FULCRUM TAINLE TEEL A582 6 VALVE LEVER TAINLE TEEL A582 7 LINK TAINLE TEEL A240 8 BALL FULCRUM TAINLE TEEL A582 9 BALL FLOAT TAINLE TEEL A240 9A FLOAT ROD TAINLE TEEL A BALL LEVER TAINLE TEEL A BEARING PIN TAINLE TEEL A BEARING PIN TAINLE TEEL A BEARING PIN TAINLE TEEL A NUT TEEL A COTTER PIN TAINLE TEEL A BOLT TEEL A NUT TEEL A TOP CAT IRON A126 CL.B 20 FLANGE CAT IRON A126 CL.B 21 BODY CAT IRON A126 CL.B 22 FULCRUM WAHER FIBER D710 22A FULCRUM WAHER FIBER D EAT GAKET BUNA-N RUBBER D FLANGE GAKET ARMTRONG N-8092 N/A 25 BOLT TAINLE TEEL A193 *40 FLUH PLUG CAT IRON A126 CL.B OPTIONAL BACK FLUH COMPONENT *1B HOE AEMBLY CAD. PLT. TEEL& RUBBER N/A *2B NIPPLE TEEL A53 *3B NIPPLE TEEL A53 *4B NIPPLE TEEL A53 *5B BALL VALVE BRA N/A *6B BALL VALVE BRA N/A pecifications The Pressure ewer Air Release Valve(s) shall be installed at high points in the line, or at points selected by the engineer, to vent the accumulation of air and other gases with the line under pressure. The valve(s) shall be of the long body design and shall have a orifice with an adjustable Buna-N rubber valve and a sealing face of PVC. The valve(s) shall operate at PIG, and be capable of passing CFM of air. They shall also be NPT screwed or ANI Class (125, 250) flanged connection. They shall have a cast iron body, top and flange, where required, and a stainless steel trim. The valve(s) shall be Crispin Model Pressure ewer Valve(s) as manufactured by Crispin- Multiplex Manufacturing Co., Berwick, PA. Option: The valve(s) shall be supplied with back flushing attachments so that the interior body can be flushed periodically for proper operation. Option: The valve(s) shall be a hort Body Pressure ewer Valve with an overall height not to exceed 12 1/4. Option: Where pressures are greater than 300 PIG, the valve(s) shall be ANI Class flanged inlet connection, and shall have a (steel, stainless steel, or ductile iron) body, top and inlet flange. tandard operating pressure for Crispin Air Valves is 20 to 150 PIG. Please check one of the following if your operating needs differ: 2 to 40 PIG 151 to 300 PIG * Parts are interchangeable and optional at customer s request ize pecifications MODEL INLET IZE OUTLET IZE A B C D WHT NPT 0.50 NPT B 2 NPT 0.50 NPT Orifice Options DIAMETER MAX. PRE. DICHARGE RATE 1/4 150 PIG 97.5 CFM 1/8 300 PIG 46.7 CFM Crispin Valve, 600 Fowler Ave., Berwick, PA AIR-VALV T: (570) F: (570) info@crispinvalve.com
A ir can accumulate in a sewage collection system that is
The & U eries ewage Air Valves Helps Prevent ystem hutdown tandard and High Capacity eries Available eries Includes Air & Vacuum and Pressure Combination Units Crispin ince 1905 Crispin Multiplex Manufacturing
More informationUS SERIES. Universal Sewer Valves. Universal Sewer Valves. Valve Function. Features Include
Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Allows accumulating air to escape while line is in operation Features Include Standard and short body series available
More informationThe Universal Sewer Air Release Valve is designed to permit
Universal Sewer Valves Universal Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Allows accumulating air to escape while line is in operation Features
More informationThe PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin.
The PL Series Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger Crispin Since 1905 PL SERIES Functio n Allows air and/or gas to be released from a pressurized liquid system
More informationCrispin. The UL Series Universal Air Release Valves. Compound Lever System NPT Screwed or ANSI Class Flanges Available.
The UL Series Universal Air Release s Compound Lever System NPT Screwed or ANSI Class Flanges Available Crispin Since 105 sales@crispinvalve.com Universal Air Release s Universal Air Release UL SERIES
More informationThe SC Series Surge Check Valves Sizes 3 thru 24 Available Cast Iron Construction Limits the Effects of System Surge on Air Release Valves.
The Series Sizes 3 thru 24 Available Cast Iron Construction Limits the Effects of System Surge on Air Release Valves Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA
More informationVacuum Relief Performance Curves
Vacuum Relief Valves Crispin Vacuum Relief Valves Valve Function llows air to enter system when vacuum occurs Prevents air exhaustion during pump start-up Features Cracks open to admit air at.25 PSIG differential
More informationAir and Vacuum Sewer Valves. Stainless Steel Trim Standard. Short Air & Vacuum Sewer Series
ir and Vacuum Sewer Valves ir and Vacuum Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable
More informationStainless Steel Trim Standard. ir and Vacuum Sewer Valves permit a large volume of air to
ir and Vacuum Sewer Valves Valve Functio n Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable in sizes thru 10 ll
More informationInstalled on the pump suction, CRISPIN Foot Valves prevent the
Foot Valves Crispin Foot Valves SERIES Valve Function Maintains pump prime upon pump outage Features Resilient seat provides positive shut off Full flow area Stainless steel inlet screen Rugged construction
More informationCrispin Valves Operating Guide. Crispin
Crispin Valves Operating Guide Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA 18603 1-800-AIR-VALV T: (570) 752-4524 F: (570) 752-4962 www.crispinvalve.com sales@crispinvalve.com
More informationThe TD Series Tilting Disc Check Valve Sizes from 2 to 72 #125 and #250 ratings available 55 seating angle 40% size increase through seat.
The Series Sizes from 2 to 72 #125 and #250 ratings available 55 seating angle 40% size increase through seat Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA 18603
More informationThe SWL Series Swing Check Valves Meets AWWA C Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution
The Series Meets AWWA C-508-01 Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick,
More informationSERIES 900 PLUG VALVES
K - F L O VA LV E S SERIES 900 PLUG VALVES VA LV E S F R O M 1 4 T H R U 4 8 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 900 SerieS Plug Valve Sizes 14-48 Crispin/K-Flo Series 900 is
More informationG lobe Style Check Valves are designed to close before the
GC SERIES 2 GC Service Applicatio ns Mnicipal Water Systems Indstrial Class HVAC-Liqid Service Indstrial Piping Systems Irrigation Systems Pressre/ Temperatr e Rating Maximm Temperatre Rating: 150ÞF (65ÞC)
More informationCUSTOM COMBINATION AIR VALVE
INSTALLATION / OPERATION / MAINTENANCE CUSTOM COMBINATION AIR VALVE INTRODUCTION This manual will provide you with the information to properly install and maintain this valve to ensure a long service life.
More informationModel descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
More informationWafer Style Silent Check Valves are designed to close
Wafer Style Silent Check Valve Service Applications Mnicipal Water Systems Indstrial Class HVAC-Liqid Service Indstrial Piping Systems Irrigation Systems Pressre/ Temperatre Rating Maximm Temperatre Rating:
More informationSeries 34. Specifications
Series Air Release Valves Stainless Steel T Trim Standard Stainless Steel Floats Guaranteed Easily Serviced Without Removal From Pipeline Working Pressures to 800 PSI Engineered For Drip Tight Seal At
More informationKUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
More informationG lobe Style Check Valves are designed to close before the
SERIES Service Applications Mnicipal Water Systems Indstrial Class HVAC-Liqid Service Indstrial Piping Systems Irrigation Systems Pressre/ Temperatre Rating Maximm Temperatre Rating: 10ÞF (ÞC) Pressre
More informationSUBDIVISIONS AND RIGHTS OF WAY
CONSTRUCTION STANDARDS FOR PUBLIC WORKS AND UTILITIES WITHIN SUBDIVISIONS AND RIGHTS OF WAY DECEMBER 16, 2013 CONTACT INFORMATION Contacts CHIEF BUILDING OFFICIAL Joe Dominguez Phone number: (928) 432-4144
More informationD-023 PN 16 / 25. Combination Air Valve for Wastewater PATENTED. Description. Applications. Operation. Main Features
PN 16 / 25 Wastewater Combination Air Valve for Wastewater PATENTED EuroC-D023SWG-15-2 Description The D-023 Combination Air Valve combines an air & vacuum component and an air release component in a single
More informationAir Valves Engineering Creative Solutions for Fluid Systems Since 1901
Air s Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 Email: moreinfo@henrypratt.com Table of Contents
More informationAIRPRO MAX AIR VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
AIRPRO MAX AIR VALVES Engineering Creative Solutions for Fluid Systems Since 0 TABLE OF CONTENTS AIRPRO MAX AIR VALVES Air Release Valve Data and Sizing Guide... Air Vacuum Valve Data and Sizing Guide...-
More informationSuggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
More informationIron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
More informationSuction Guide & Flo-Trex Valve Series
Suction Guide & Flo-Trex Valve Series Pump Trim FILE NO: 6-1 DATE: August 2010 SUPERSEDES: 6-1 DATE: July 200 Series SG & FTV Suction Guides Designed for direct mounting on the suction flange of horizontal
More informationItem 501T Multi-Way Ball Valve
Item T MultiWay Ball Valve 000/00 WOG/ PN/ IZE: /"" the media from leaving in the cavity for easy cleaning & antisticky of the ball. But the internal body need to be machining first. As for the soft kits,
More informationCheck Valve AP64 P.149. Vacuum Generator Vacuum Generator Module Vacuum Generator Module AP7 & 70 AP71 AP72. Flow Switch Flow Switch (For high flow)
Check Valve eries Check Valve AP64 P.149 Vacuum Generator Vacuum Generator Vacuum Generator Module Vacuum Generator Module Flow witch Flow witch Flow witch (For high flow) eries AP7 & 7 AP71 AP72 eries
More informationSECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
More informationSeries 36-WW COMBINATION AIR VALVES DATA AND SIZING WASTEWATER SERVICE. (Single Body Style) Installation. Specifications. Purchase Specification
Series -WW COMINTION IR S DT ND SIZING WSTEWTER SERVICE (Single ody Style) Stainless Steel T Trim Standard Stainless Steel Floats Guaranteed Fully Ported s - No Restrictions Engineered For Drip Tight Seal
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 437 Safety Relief Valve pring loaded Metric + US Unit Fact The-Safety-Valve.com Deign 40 Cap H2 18 Adjuting crew with buhing 19 Lock nut 16 Spring plate 12 Spindle 54 Spring Axial needle 69 beering
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
More informationSTM Series Flanged Characterized Ball Valves
TM eries Flanged Ball Valves are designed to regulate the flow of hot water, chilled water, and % glycol solutions to the demand of a controller in Heating, Ventilating, and Air Conditioning (HVAC) systems.the
More informationseries 5100 GAS/PNEUMATIC DRIVEN INJECTION PUMP DESCRIPTION APPLICATIONS
TEXSTEAM Pumps series 5100 GAS/PNEUMATIC DRIVEN INJECTION PUMP Series 5100 LP Wt. 45 pounds Microswitch Option Available DESCRIPTION The 5100 Series performs accurately because (1) the head is designed
More informationValve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
More informationSection 8 AMERICAN. Flanged Pipe
Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either
More informationUnderground ball valves JIP for pre-insulation
Data heet Decription Danfo JIP underground ball valve are deigned for ditrict heating ytem and other cloed loop water ytem where the water i treated to avoid internal corroion. aving a fully welded body,
More informationMustang Series PRESSURE REDUCING CONTROL VALVE. M115 (Globe) M1115 (Angle) Schematic. Standard Components. Options & Accessories.
PRESSURE REDUCING CONTROL VALVE 02/09 Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) P/L Standard Components 1 Main Valve
More informationAir Valves. Patent Pending. Engineering Creative Solutions for Fluid Systems Since 1901
Air Valves Patent Pending Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the
More informationMILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
More informationSuggested Specifications
TTR Group Inc. The Engineered Valve & Speciality Products Company Suggested Specifications Meeting and Exceeding AWWA Guidelines AWWA C 504 Latest Revision Butterfly Valves AWWA C 508 Latest Revision Check
More informationDELUGE VALVE MODEL: SD-DVA TECHNICAL DATA : VALVE OPERATION TRIM DESCRIPTION DESCRIPTION PRESSURE THREADED OPENING
DELUGE VALVE MODEL: SD-DVA TECHNICAL DATA : NOMINAL SIZE MATERIAL MAXIMUM SERVICE PRESSURE 200, 150, 100, 80 & 50NB Cast Iron 12 Bar (175 PSI) THREADED OPENING MOUNTING FACTORY HYDROSTATIC TEST PRESSURE
More informationAWWA SWING CHECK VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
AWWA SWING CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS AWWA SWING CHECK VALVE Series 8001 Lever & Weight or Spring...1 Series 9001 Lever & Weight or Spring...2
More informationPackless Valves. Instrument / Analyzer Products. Catalog 4515/USA April 2006
Packless Valves Instrument / Analyzer Products Catalog 4515/UA April 2006 NV55 eries Catalog 4515/UA NV55 eries High Flow Diaphragm Valves Parker Hannifin Corporation s presents the NV55. The NV55 is an
More informationHIGH PRESSURE TRUNNION BALL VALVES TBV SERIES
HIGH PREURE TRUNNION BALL VALVE TBV ERIE TBV FEATURE On/Off-service ball valve with 2-way pattern Diverter, selector and on/off-service ball valve with 3-way pattern MAWP* 10,000 psi (689 bar) with PEEK
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Closes quickly when downstream pressure exceeds reduced pressure setpoint 3 PRESSURE REDUCING VALVE with SURGE
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More information627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high pressure systems. These regulators can be used with natural
More informationM03 Series. Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 1200 psi (83 bar) for Metallic Pump Heads
M3 eries Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 12 psi (83 bar) for Metallic Pump Heads M3 eries Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Maximum Inlet Pressure Model
More informationV A L V E S & M E A S U R E M E N T. TOM WHEATLEY Piston Check Valves TOM WHEATLEY
TM TOM WHEATLEY Piston Check Valves TABLE OF CONTENTS PISTON CHECK VALVE Features 1 Installation & Operation 2 How to Order 2 Assembly & Disassembly 3 Dimensions Raised Face Flanged End 4 Dimensions Ring
More informationP99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
More informationModel DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Electric Actuation
Deluge Valve DV-5 Model DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Electric Actuation GeneralDescription The Model DV-5 Deluge Valve (described in Technical
More informationMark 6127 Series. Pressure Regulators Mark 6127 Series. Pressure Reducing Valves. Valve Features. Operation
Mark 6127 Series Pressure Reducing Valves The primary function of the Mark 6127 is to reduce a greater upstream pressure to a lesser, more manageable downstream pressure, operating without regard to either
More information627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated reducing regulators (Figure 1) are for low and high systems. These regulators can be used with natural gas, air, or a
More informationAWWA Swing Check Valves
AWWA Swing Check Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More informationPRESSURE REDUCING CONTROL VALVE
PRESSURE REDUCING CONTROL VALVE 06/08 Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) X P/L Standard Components 1 Main
More information627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high-pressure systems. These regulators can be used with natural
More informationMODULATING FLOAT CONTROL VALVE
PROJECT NAME LOCATION MODULATING FLOAT CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More informationModel descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
More informationFLOAT CONTROL VALVES
PROJECT NAME LOCATION FLOAT CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 8 in. (200 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More informationCCNE Check Valves Engineering Creative Solutions for Fluid Systems Since 1901
CCNE Check Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry
More informationTECHNICAL DATA CAUTION
Page 1 of 6 1. DESCRIPTION The Viking Model D-2 Accelerator is a quick-opening device, with an integral anti-flood assembly, used to increase the operating speed of a differential type dry pipe valve.
More informationCrosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
More informationProtection Systems. 3-Way Directional Valve P/N: XX-00X. A UTC Fire & Security Company FEATURES
Effective: Nov. 2010 Fenwal Phoenix Directional Valve P/N: 93-2200XX-00X TM R Protection ystems A UTC Fire & ecurity Company F-93-121 FEATURE For use with Fenwal Phoenix ystems Cost-Effective Option for
More informationALTITUDE CONTROL VALVES FOR ONE WAY FLOW
PROJECT NAME LOCATION ALTITUDE CONTROL VALVES FOR ONE WAY FLOW INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1
More informationProtection Systems. 3-Way Directional Ball Valve P/Ns: X and X. A UTC Fire & Security Company FEATURES
Effective: April 2007 Fenwal Phoenix 3-Way Directional Ball Valve P/Ns: 93-118325-00X and 93-118327-00X TM R Protection ystems A UTC Fire & ecurity Company F-93-120 FEATURE For use with Fenwal Phoenix
More informationDELUGE VALVE DATA SHEET
FIRE FIGHTING EQUIPMENT DATA SHEET DELUGE VALVE DATA SHEET JOB NO. : RFQ. NO. : ISSUE : SHEET OF 01 CUSTOMER : ITEM NO. : 02 PROJECT : QUANTITY : 03 LOCATION : SERVICE : FIRE WATER AND / OR FOAM SYSTEM
More information6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE
6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE DOCUMENT NO.: ES-1495 REVISION LEVEL: A ISSUED BY: Bill Hooks DATE: 09/25/13 APPROVED BY: DATE: APOLLO
More informationPRESSURE REDUCING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE REDUCING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More informationelbow ball check valves Patents no.: US 8,146,618 B2, US 8,082,949 B2 in-line ball check valves Patent no.: US 8,146,618 B2 PRODUCT CATALOG
elbow ball check valves Patents no.: US 8,1,18 B, US 8,08,99 B in-line ball check valves Patent no.: US 8,1,18 B PRODUCT CATAOG Version 09.017 SZUSTER system is a brand of innovative products which, due
More informationD-26. Combination Air Valve for Wastewater. Description. Applications. Operation. Main Features
D26.SWG.CAT.ENG0 D-26 Wastewater Combination Air Valve for Wastewater Description The D-26 Combination Air Valve combines an air & vacuum component and an air release component in a single body. The valve
More informationCrosby Style JQ Pressure Relief Device. Flow Control
Designed in collaboration with the, Inc. the Crosby JQ is designed with internal parts completely isolated from corrosive fluids and environments. The Crosby Style JQ pressure relief device was designed
More informationPIPING TO HAZARD PIPING TO HAZARD AGENT SOURCE AGENT SOURCE TOP VIEW TOP VIEW
Kidde Engineered Fire uppression ystem Designed for use with 3M Novec 1230 Fire Protection Fluid 3-Way Directional Ball Valve Data heet Effective:March 2005 K-45-9070 FEATURE For use with Kidde Engineered
More informationKENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
More informationLEAD FREE * LFM115 (Globe) LFM1115 (Angle)
ES-ACV-SB-LFM115_LFM1115 LEAD FREE * Pressure Reducing Control Valve Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) P/L
More informationPRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
More informationSeries SG & FTV. Suction Guides & Flo-Trex Valves
Series SG & FTV Suction Guides & Flo-Trex Valves File no.: 35.11l Date: nov. 15, 2013 Supersedes: 35.11in Date: february 05, 2013 Series SG & FTV Suction Guides Designed for direct mounting on the suction
More informationt e s t p l u g s 5.1 mechanical test plugs pneumatic TEST plugs drain test caps 9
5 t e s t p l u g s 5.1 mechanical test plugs 2 5.2 pneumatic TEST plugs 6 5.3 ACCESSORIES FOR PNEUMATIC plugs 8 5.4 drain test caps 9 5.1 mechanical TEST PLUGS KWIK N SURE PLUGS For temporary shut-off
More informationEJECTORS GENERAL OPERATION & MAINTENANCE MANUAL
EJECTORS GENERAL OPERATION & MAINTENANCE MANUAL The information contained in this manual was current at the time of printing. The most current versions of all Hydro Instruments manuals can be found on
More informationModel 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
More informationSECTION VIII. (Sub-section 430) Wastewater Valves and Appurtenances. 1. General thru Gate Valves thru 430-3
SECTION VIII (Sub-section 430) Wastewater Valves and Appurtenances Article Page 1. General 430-1 thru 430-2 2. Gate Valves 430-2 thru 430-3 3. Plug Valves 430-3 thru 430-4 4. Check Valves 430-4 5. Tapping
More informationINSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 377 Float Cage / 326L & 322L lever Valves TABLE OF CONTENTS Overview... Cover General Information... Cover Operation... 4 Installation...4-6 Maintenance...
More informationInstallation, Operation & Maintenance Instructions
Installation, Operation & Maintenance Instructions 377 Float Cage / 326L & 322L lever Valves TABLE OF CONTENTS Overview... Cover General Information... Cover Operation... 4 Installation...4-6 Maintenance...
More informationSERVICE INSTRUCTIONS D TON
1120 SOUTH CRYSTAL AVE * BENTON HARBOR MI PH: 269-925-7777 FAX: 269-925-6656 SERVICE INSTRUCTIONS D-51223 4 TON TO ASSEMBLE: 1. Check the handle set screw for tightness. CUSTOMER PRE-USE INSTRUCTIONS THE
More information5020 Series Injector
5.2018.9.k 1 5020 Series Injector 1 2 3 4 5 6 10 11 7 12 13 8 2 14 Parts List 15 16 17 Item # Part # # Reqd. Description Material Alternate Part # 1 A-1854 1 0-12 PSI Pressure Gauge A-1295SS 2 A-0022 1
More informationDESCRIPTION FEATURES. facilities, pipelines, process plants and other applications where a rugged, easy to maintain proportioning pump is required.
DESCRIPTION The series 4300 chemical injectors are electric motor driven, positive displacement pumps utilizing an integral worm gear drive available in three different standard ratios and 6 plunger sizes
More informationTechnical Data TYPE A SERIES AIR ADJUSTED PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4011 OPERATING PRINCIPLE
Technical Data SD 4011 SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 TYPE A SERIES AIR ADJUSTED PILOT PRINTED IN U.S.A. SD 4011/9504 Type A or A83 (wt 6 lb) Type A53 or A 85
More informationPRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE
PROJECT NAME LOCATION PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2-1/2 in. (65 mm) through 18 in. (450 mm) Control
More informationApproved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
More informationCrosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
More informationseries4300 ELECTRIC DRIVEN INJECTION PUMP DESCRIPTION FEATURES
TEXSTEAM Pumps series4300 ELECTRIC DRIVEN INJECTION PUMP DESCRIPTION The series 4300 chemical injectors are electric motor driven, positive displacement pumps utilizing an integral worm gear drive available
More informationD-040 PN 16 D-040-C PN 16. Combination Air Valve. Description. Applications. Operation. Main Features
D-00 PN 1 Water Supply D-00-C PN 1 Combination Air Valve EnC-D00WTR-11 Description The D-00 series Combination Air Valve has the features of both an air release valve and an air & vacuum valve. The air
More informationHoffman Specialty Service Parts Catalog PARTS LIST HS-800C
Hoffman Specialty Service Parts Catalog PARTS LIST HS-800C Hoffman Specialty Table of Contents STEAM TRAPS FLOAT AND THERMOSTATIC SERIES PAGE INVERTED BUCKET SERIES PAGE C 6 B0 H B I B X 6 B 6 8 B 6 0
More informationVal-Matic 1/2-3 Well Service Air Valve With Dual Port Throttling Device
Manual No. WSAV-OM1-2 Val-Matic 1/2-3 Well Service Air Valve With Dual Port Throttling Device Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF
More informationQ= C. v P S Refer to Table 1 for part numbers and shipping weights. Accessories: Table 1: Valve Part Numbers and Specifications
1 of 9 1. DESCRIPTION The Viking Flow Control Valve is a quick opening, differential diaphragm flood valve with a spring loaded floating clapper. The Flow Control Valve can be used to facilitate manual
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More information