SECTION TWO - INTERMODAL - VENTING
|
|
- Marjory Amie Gibbs
- 5 years ago
- Views:
Transcription
1 PEROLO MULTI-SUPERVENTIX SRV KEY PART NUMBER DESCRIPTION 5A PER PEROLO SRV SPRING SET, 2.18 BAR 5-6 PER PEROLO SRV SPRING SET, 3.75 BAR 5-6 PER PEROLO SRV SPRING SET, 4.40 BAR 7 PER PEROLO SRV PRESSURE ONLY PLATE 8-9 PER PEROLO SRV SEAL KIT 10 PER PEROLO SRV PRESSURE/VACUUM PRESSURE PLATE 11 PER PEROLO SRV VACUUM POPPET 14 PER PEROLO SRV VACUUM SPRING,.21 BAR 15 ISO SRV MOUNTING GASKET 16 PER PEROLO SRV GAUZE KIT 16A ISO-176/2200 GENERIC SRV GAUZE KIT (WILL FIT PEROLO SRV) SECTION TWO - INTERMODAL - VENTING 2-1
2 VENTING - INTERMODAL - SECTION TWO 2-2 FORT VALE INTERMODAL TANK CONTAINER VENT PART NUMBER: FOR-010/ BAR VENT W/ 2 Hg VACUUM FOR-010/ BAR VENT W/ 2 Hg VACUUM FOR-010/ BAR VENT W/ 2 Hg VACUUM The Fort Vale SuperMaxi Relief Vent is made in 316 stainless steel. 2.5 nominal bore vent with standard 2.5 BSP male threads..
3 SECTION TWO - INTERMODAL - FOOTVALVES 2-3
4 FOOTVALVES - INTERMODAL - SECTION TWO 2-4 FORT VALE 3 45 DEGREE CLEANFLOW FOOTVALVE
5 FORT VALE 3 45 DEGREE MARSDEN FOOTVALVE SECTION TWO - INTERMODAL - FOOTVALVES 2-5
6 FOOTVALVES - INTERMODAL - SECTION TWO 2-6 FORT VALE 3 30 DEGREE MARSDEN FOOTVALVE
7 FORT VALE 3 CLEANFLOW FOOTVALVE/BUTTERFLY COMBINATION VALVE SECTION TWO - INTERMODAL - FOOTVALVES 2-7
8 FOOTVALVES - INTERMODAL - SECTION TWO 2-8 FORT VALE 3 HIGHLIFT FOOTVALVE/BUTTERFLY COMBINATION VALVE
9 FORT VALE 3 CLAMPED TYPE BUTTERFLY VALVE SECTION TWO - INTERMODAL - B-FLY VALVES 2-9
10 B-FLY VALVES - INTERMODAL - SECTION TWO 2-10 FORT VALE 3 FLANGED TYPE BUTTERFLY VALVE
11 PEROLO 3 CLAMPED TYPE BUTTERFLY VALVE KEY # PART NUMBER DESCRIPTION PART NUMBER PER PER TANKFLY (CLOCKWISE) 3 TANKFLY (ANTICLOCKWISE) 2A PER BUTTERFLY DISC (CLOCKWISE) 2B PER BUTTERFLY DISC (ANTI-CLOCKWISE) 3 PER PTFE BUTTERFLY SEAT 4-8 PER GASKET TIGHTENING FLANGE SET 5 PER SPINDLE 6-7 PER SPINDLE BEARING SET 10A PER HANDLE (CLOCKWISE) 10B PER HANDLE (ANTI-CLOCKWISE) 12 PER HANDLE OPERATING SPRING 13 PER HANDLE CONTROL LEVER PER SPINDLE SEAL SET SECTION TWO - INTERMODAL - B-FLY VALVES 2-11
12 ACCESSORIES - INTERMODAL - SECTION TWO 2-12 ACCESSORIES FOR BUTTERFLY VALVES PART NUMBER ISO-DINF300SSBN 3 T316 STAINLESS STEEL SLOTTED FLANGE. AVAILABLE WITH 3 MALE NPT OR BSP THREADS. PART NUMBER ISO-PC303SS 3 T316 STAINLESS STEEL PIPE CAP W/BSP THREADS.
13 ACCESSORIES FOR BUTTERFLY VALVES FOR-368/1100 Bolt kit for clamp type butterfly valve. FOR-368/1500 Spacer kit for centralising butterfly valve. FOR-312/0022 Fort Vale DIN 80 dished blind flange bolts directly to the flanged butterfly valve. Allows valve operation with the flange in place without the closure plate fouling as would happen with the conventional FOR-312/0020 flat flange. FOR-368/8047 Fort Vale 3 Male BSP square spigot flange. This 316 stainless steel flange in commonly used on clamp type or flanged type butterfly valves. SECTION TWO - INTERMODAL - ACCESSORIES 2-13
14 BLACKO BALL VLV - INTERMODAL - SECTION TWO 2-14 Visit our web FORT VALE 3 BLACKO BALL VALVE
15 FORT VALE 1.5 AIRLINE BALL VALVE PART NUMBER FOR-530/0000F Fort Vale 1.5 airline ball valve is manufactured in 316 stainless, with PTFE seals, complete with pressure gauge connection for use on ISO Tank s air lines. This version has 1.5 BSP male inlet. SECTION TWO-INTERMODAL-AIRLINE VALVES 2-15
16 AIR VALVES - INTERMODAL - SECTION TWO 2-16 PEROLO 1.5 AIRLINE BALL VALVE KEY # PART # DESCRIPTION PER SEALS & GASKET KIT 4-5 PER HANDLE KIT 6 PER SPINDLE 13 PER GAUZE FILTER 3 ISO-9103 PTFE FRONT SEAL ONLY 11 ISO-9111 PTFE REAR SEAL ONLY PART NUMBER PER-AD4X6T21CP11 The Perolo ATCO straight threaded model is designed with 1.5 BSP male threads. Flanged models and dual threaded models are also available.
17 PART NUMBER ISO-PC300SS ISO-PC301SS ISO-PC303SS ISO-PC305SS ISO-PC306SS ISO-PC706AL ISO-PC707AL PART NUMBER ISO-PA3020BNSS Visit our web PIPE CAPS & ADAPTORS PART NUMBER ISO-PA3030BNSS 3 T316 STAINLESS STEEL PIPE ADAPTOR. 3 FEMALE BSP X 2 MALE NPT. 1.5 S/S BSP SOLID PIPE CAP 2 S/S BSP SOLID PIPE CAP 3 S/S BSP SOLID PIPE CAP 1 S/S BSP SOLID PIPE CAP 3/4 S/S BSP SOLID PIPE CAP 3/4 ALUM. BSP SOLID PIPE CAP 1 ALUM. BSP SOLID PIPE CAP 3 T316 STAINLESS STEEL PIPE ADAPTOR. 3 FEMALE BSP X 3 MALE NPT. PART NUMBER ISO-PA1575BNSS ISO-PA2075BNSS 1.5 F.BSP X 3/4 F.NPT 2 F.BSP X 3/4 F.NPT THESE ADAPTORS MANUFACTURED IN T316 STAINLESS STEEL SECTION TWO - INTERMODAL - CAPS & ADAPTORS
18 RUPTURE DISCS - INTERMODAL - SECTION TWO 2-18 PROQUIP RUPTURE DISCS The Proquip ICP rupture disc is a scored forward acting disc designed specifically for the protection on Intermodal Tank Containers. Because it is scored, it will not fragment when it bursts. It is available in 2.5 (65mm) and 3 (80mm) sizes and will fit between ANSI 150, BS 10 Table E, DIN PN 10/16 and ISO standard flanges. PRO-ICT BAR DISC PRO-ICT BAR DISC
AIRLINE EQUIPMENT CATALOGUE //
AIRLINE EQUIPMENT CATALOGUE // 16 15 14 13 12 11 10 9 The Fort Vale Range of Airline Ball & Butterfly Valves 8 Fort Vale Engineering Ltd. 2014 THIS PAGE IS INTENTIONALLY BLANK AIRLINE VALVE CATALOGUE //
More informationLINED EQUIPMENT // Fort Vale Engineering Ltd CATALOGUE REVISION_
LINED EQUIPMENT // Fort Vale Engineering Ltd. 2018 CATALOGUE REVISION_03-16..18 LINED EQUIPMENT CATALOGUE // CONTENTS // FOOTVALVES //» 3" PFA Lined Cleanflow Footvalve with 5 Outlet» 3" 5 Halar Lined
More informationLINED EQUIPMENT // Fort Vale Engineering Ltd CATALOGUE REVISION_
LINED EQUIPMENT // 3 45 Footvalve 4 to 3 Hydraulic Footvalve 25mm Ball Valve 50mm Ball Valve 80mm Ball Valve 3" Butterfly Valve MK3 65mm Flanged Relief Valve 80mm Flanged Vacuum Vent Valve Fort Vale Engineering
More informationCORE SPECIFICATION //
CORE SPECIFICATION // 4 Bar ISO Tank Container REV05_27.10.16 Fort Vale Engineering Ltd. 2016 CORE SPECIFICATION ISO TANK CONTAINER // CONTENTS // MANLID EQUIPMENT //» 300mm Ultra Low Profile Pendle Inspection
More informationmegaflo BSP Pressure Relief Vent
Pressure RELIEF VENTS PRV s SECTION 2 When it comes to pressure/vacuum protection, Girard has been putting their name and reputation on the line every day for close to 60 years. We start with only the
More informationBALL VALVE CATALOGUE //
BALL VALVE CATALOGUE // The Fort Vale Range of Ball Valves CATALOGUE REVISION_01-27.01.1 Fort Vale Engineering Ltd. 201 THIS PAGE IS INTENTIONALLY BLANK BALL VALVE CATALOGUE // CONTENTS // AIRLINE BALL
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationType 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
More informationSpares. U.K. Netherlands U.S.A. Russia China Singapore
FORT VALE ENGINEERING LTD Head Office & Manufacturing Plant Calder Vale Park, Simonstone Lane, Simonstone, Burnley, Lancashire, BB ND. United Kingdom. FORT VALE BV Gieterijstraat 0 AB RIDDERKERK The Netherlands
More informationROAD TANKER EQUIPMENT CATALOGUE //
ROAD TANKER EQUIPMENT CATALOGUE // GENERAL PURPOSE ROAD TANKER Fort Vale Engineering Ltd. 2013 CATALOGUE REVISION_02-10.12.13 THIS PAGE IS INTENTIONALLY BLANK ROAD TANKER EQUIPMENT CATALOGUE // CONTENTS
More informationItem Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
More informationPressure/Vacuum Vents
Pressure/Vacuum Vents Girard 307/312 Vent Assemblies 407/412 Vent Assemblies MC307B Series 3MVB Series DOT407L Series 407MVB Series Fort Vale 407 307/312 Vent Assemblies Connections Available 407/412 Vent
More informationOFFSHORE EQUIPMENT CATALOGUE //
OFFSHORE EQUIPMENT CATALOGUE // CATALOGUE REVISION_06 09.06.14 The Fort Vale Range of Equipment for Offshore Tanks Fort Vale Engineering Ltd. 2014 OFFSHORE CATALOGUE // CONTENTS // MANLID EQUIPMENT //»
More informationCORE SPECIFICATION //
CORE SPECIFICATION // ISO Liquefied Gas Tank Container Equipment REV01_10.12.07 Fort Vale Engineering Ltd. 2009 CORE SPECIFICATION GAS TANK CONTAINER // CONTENTS // PRESSURE RELIEF EQUIPMENT //» 80MM INTERNAL
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
More informationType 437. Type 437. Available designs. Cap H2 Adjusting screw with bushing. Axial needle 69 beering. Lock nut. Spring plate. Spring plate. Pin.
Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring 2 Outlet body 17 Spring plate 57 Pin 61 Ball 7 Disc 1 Body Threaded
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More informationBUTTERFLY VALVE CATALOGUE //
BUTTERFLY VALVE CATALOGUE // 11 The Fort Vale of s 1 CATALOGUE REVISION_01-.0.0 Fort Vale Engineering Ltd. 20 BUTTERFLY CATALOGUE // CONTENTS // 2 BUTTERFLY VALVES //» 2 CLAMPED WIDDOP BUTTERFLY VALVE
More informationType 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
More informationSeries 900 Minifolds. Aluminium Air Distribution Manifolds. Manifolds & Minifolds. Technical Specifications. hnl-uk.com. Series 900 Minifolds
Series 900 Minifolds Aluminium Air Distribution Manifolds Replace complex assemblies of valves and fittings with anodised aluminium MINIFOLDS., OR 20 OUTLETS COMPREHENSIVE RANGE ALSO AVAILABLE IN 36 STAINLESS
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 459 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
More informationmanual valves inch sizes
Spears True Union 2000 Industrial Vented Ball Valve Description: In-line double union ball valve Maximum Fluid Pressure at 20 C: All sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 4-10 bar; all sizes flanged
More informationType 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
More informationType 427, 429. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 427, 429 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.05-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
More informationPraher S4 Ball Valve. manual valves. Praher Type S4 Ball Valve. Materials. Size. Pressure Rating. Features. Connections.
Praher S4 Ball Valve Praher Type S4 Ball Valve Descripti: In-line double uni ball valve with lockable handle Mounting: In any positi Maximum Fluid Pressure at 20 C: s 16mm to 7mm - 10bar; s 90mm to 110mm
More information(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
More informationType 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.05-E 462.01-D Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring
More informationType 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.04-E Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring plate
More informationSTC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
More informationVALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
More informationPRODUCE EVOLUTION. Be careful, our valves Ref are changing
ATEX DIN M3 PRODUCE EVOLUTION Be careful, our valves Ref.704-706 are changing We currently have 2 different types available (according to DN) with different dimensions and ATEX certification for the new
More informationDN 1/4 to 4 Threaded BSP or NPT - 20 C C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/4 to 4 Threaded BSP or NPT - 20 C + 180 C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore Materials
More informationpvc-c manual valves inch sizes manual valves inch sizes Spears True Union 2000 Industrial Ball Valve
pvc-c Spears True Union 2000 Industrial Ball Valve Description: In-line double union ball valve with lockable handle Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 6-10 bar All
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationPipe Nipples / Solvent Cement / Pipe Clips 11. Diaphragm Valves / Knife Gate Valves 21
TABLE OF CONTENTS Pipe Sizing 1 Pipe 2 Tee s 3 Elbows 4 Couplings 5 Adaptors, Caps & Plugs 6 Unions 7 Reducer Bushing 8 Wye s / Clamp on Saddles 9 Flanges 10 Pipe Nipples / Solvent Cement / Pipe Clips
More informationM10F Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 437 Safety Relief Valve pring loaded Metric + US Unit Fact The-Safety-Valve.com Deign 40 Cap H2 18 Adjuting crew with buhing 19 Lock nut 16 Spring plate 12 Spindle 54 Spring Axial needle 69 beering
More informationRAIL TANKER EQUIPMENT CATALOGUE //
RAIL TANKER EQUIPMENT CATALOGUE // CORE COMPONENTS // Fort Vale Engineering Ltd. 08 CATALOGUE REVISION_0-0.03.8 RAIL TANKER EQUIPMENT // CORE COMPONENTS CONTENTS // REFUELLING EQUIPMENT //» 50mm Rail Locomotive
More informationPRODUCE EVOLUTION. Be careful, our valves Ref.789 are changing
PRODUCE EVOLUTION Be careful, our valves Ref.789 are changing We currently have 2 different types available (according to DN) with different dimensions Marking old type : Marking new Type : At the end,
More informationCHARACTERISTICS ACCESSORIES. High Efficiency Pilot Operated Safety Valves
Technical High Efficiency Pilot Operated Safety Valves are derived from the conventional valves of the same series, and retain the same orifices. They are designed and manufactured in according to the
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
More informationType 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
More informationpvc-u section guide application guide standards and approvals
pvc-u Unplasticised Polyvinyl Chloride (PVC-U) is the most widely used of all plastics used for pipe installations. It is rigid, versatile, and is suitable for both above or below ground installations.
More informationBRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
More informationS60 PARTS LIST AND DRAWINGS
PARTS MANUAL S60 PARTS LIST AND DRAWINGS Item Part Description Qty. 1 S60-001 Main Body 1 2 S60-002C Chuck Housing 1 3 S60-003C Main Valve Complete 1 3A S60-003 Valve Housing (Bare) 1 3B S60-019 Valve
More informationType. Type 457, , 458. Flanged Safety Relief Valves spring loaded
Type Type 458 Packed lever H4 Closed bonnet Conventional design 457, 458 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Materials Conventional design 09/02 Balanced bellows design 09/04
More informationIndex. LIST No. GENERAL INFORMATION 1/01, 1/02. General Information 1/03. Selection of Valve Types VALVE TYPE FL 441 (STANDARD PRESSURE SERIES) 2/01
Index SECTION LIST No. DESCRIPTION PAGE No. GENERAL INFORMATION General Information Selection of Valve Types /0, /0 /0 VALVE TYPE FL (STANDARD PREURE SERIES) Method of Model Numbering /0 General Arrangement
More informationPage ATALOGUE. Web: Tel: Fax:
Page ACUUM PARE ANKER ARTS ATALOGUE Page 2 CONTENTS PAGE GAUGES 3 SAUNDERS M TYPE VALVES 4 LEVER BALL VALVES 5 GATE VALVES 6 AIR ACTUATED VALVES 7 KNIFE GATE VALVES 8 ACRYLIC SIGHT TUBE 9 RUBBER SUCTION
More informationKunkle Bailey 756 safety relief valve
The 756 safety valve combines a top piston guided valve and an unobstructed seat bore with a full lift capability, giving maximum discharge capacity Features Design incorporates an adjustable blowdown
More informationDACouplings, Dry Aviation Couplings According to ISO 45/ MS 24484/STANAG 3105
DACouplings, Dry Aviation Couplings According to ISO 45/ MS 24484/STANAG 3105 1 General information The Dry Aviation Couplings are designed for use in aviation and military refueling systems with a maximum
More information26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11.
26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11. DESCRIPTION: 26 000 LITRE INSULATED UN PORTABLE TANK, TYPE T11 For transport of product classes 3, 4,
More informationType 455, 456. Type 455, 456. Flanged Safety Relief Valves spring loaded
Type 455, 456 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Type 456 Packed lever H4 Closed bonnet Materials 08/02 Balanced bellows design 08/04 How to order Numbering system 08/06 Article
More informationflowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
More information2 way ball valve S4 with integrated Praher Labeling System
Praher Plastics Austria GmbH DB/EN/DEEN///33 Technische Änderungen vorbehalten! way ball valve S4 Symbol photo Safety locking handle system This document does not constitute a guarantee, it is for initial
More informationA Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED. Gate, Globe & Check Valves.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED Gate, Globe & Check Valves. VALVITALIA VITAS DIVISION PLANT Some production example of Forged Steel Valves 2 Valves
More informationstandard and industrial pipe fittings
fittings mm sizes standard and industrial pipe fittings Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings from 6 bars to 16 bars,
More informationHYGIENIC EQUIPMENT CATALOGUE //
HYGIENIC EQUIPMENT CATALOGUE // 5 The Fort Vale Range of Equipment 2 for Food, Brewery & Hygienic Applications 3 THIS PAGE IS INTENTIONALLY BLANK FOOD, BREWERY & HYGIENIC EQUIPMENT // CONTENTS // TOP MOUNTED
More informationHELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationType 459. Type. 459 Safety Relief Valves spring loaded
Type Plain lever H3 459 Safety Relief Valves spring loaded Contents Chapter/Page Cap H2 Materials Available designs 05/02 Available designs materials 05/03 How to order Numbering system 05/04 Article numbers
More informationDIN /DIN Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002
/ Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002 / Aseptic Screwed Unions This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More informationKUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
More informationM21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
More informationBall Valves. Red Steel Long Handle. Green Steel Long Handle. Blue Steel Long Handle. Section 7 Valves. Female x Female, BSPP. Female x Female, BSPP
Ball Full Bore Long Thread Flat Handle Seal Material PTFE -15 C to +120 C 25 bar Red Long Handle Blue Long Handle Green Long Handle 837 Female x Female, BSPP 0109 2023-0439 1/4 7.70 2023-0447 3/8 7.70
More informationMaterials : Stainless Steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP, NPT, Socket or But Welding -20 C + 180 C Max Pressure : 63 Bars up to DN50 ( 40 bars over ) Specifications : ISO 5211 mounting
More informationD-023 PN 16 / 25. Combination Air Valve for Wastewater PATENTED. Description. Applications. Operation. Main Features
PN 16 / 25 Wastewater Combination Air Valve for Wastewater PATENTED EuroC-D023SWG-15-2 Description The D-023 Combination Air Valve combines an air & vacuum component and an air release component in a single
More information3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
More informationP99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
More informationDatasheet MATRE Foam Inductors. Datasheet for MATRE Foam Inductors. 1 Contents
Datasheet for MATRE Foam Inductors 1 Contents 2 General product description... 3 3 General installation guide... 3 4 Product dimensions and performance... 3 4.1 Standard bronze housing design - threaded...4
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Carbon or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
More informationVALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
More informationPIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
More informationQuarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
More information"S" Series Needle/Gauge Valves
"S" Series Needle/Gauge Valves Autoclave Engineer s S Series needle and gauge valves have been engineered to provide reliable service and versatility in meeting specific process requirements. Valve heads
More informationManifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 462 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
More informationindustrial and economy pipe fittings PVC-U Solvent Cement WELD-ON REGULAR 719 Size Code Price 500ml tin
pvcu fittings mm sizes industrial and economy pipe fittings fittings mm sizes 68 Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationBALL VALVES BUTTERFLY VALVES GLOBE VALVES GATE VALVES CHECK VALVES KNIFE VALVES Y STRAINERS ACTUATION BALL VALVES SS2020N-300 2 PIECE FLANGED ANSI 300 BALL VALVE Firesafe Certified Full Bore TMF1600 seats
More informationTrue Union Ball Valve (BN) Product Category. Compact Ball. 2-pieces Compact Ball. Single Union Without Support. Ball Valve. True Union Without Support
Sekisui Industrial Piping Co., Ltd. located in the Chungkang Export Processing Zone of Taichung City in Taiwan. From March of 2006, Sekisui Industrial Piping Co., Ltd. was established as a wholly-owned
More informationWorld Series. WT Multi-Pressure Pump. GP/147/99 Issue 25. August For revisions and new sections see Amendment Record on page 2-3
World Series WT Multi-Pressure Pump - SPARES MANUAL - GP/147/99 Issue 25. August 2009 For revisions and new sections see Amendment Record on page 2-3 1 AMENDMENT RECORD for WT Multi-Pressure Pump Spares
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Carbon steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
More informationIndex. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
More informationA200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting SPECIFICATIONS
More informationSpring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
More information3 way ball valve S4 hand operated
General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN
More informationA type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
More information88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
More informationColVic Tanker Fittings
Tanker Fittings tanker fittings for fuel tankers are designed and manufactured by to accepted industry standards. All the fittings have full product and installation support and are available at short
More informationØ5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
More informationM21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationDM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
More informationM21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationDIN /DIN Aseptic Flange Union for DIN 11866/11850 Tube
/ Aseptic Flange Union for DIN 11866/11850 Tube / Aseptic Flange Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More informationItem 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
More informationThese PFA and PTFE lined products offer a reliable solution in hazardous applications
These PFA and PTFE lined products offer a reliable solution in hazardous applications Features Check valves Heavy duty body in ductile iron GGG4.3 (ASTM A-395). Heavy duty PFA or PTFE lining. Borosilicate
More information