Vibratory Sieve Shaker AS 300 control
|
|
- Edwina Harrington
- 6 years ago
- Views:
Transcription
1 General Information The analytical sieve shaker AS 300 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after short sieving times. The AS 300 control is particularly designed for test sieves with a diameter of 305 mm (12"). Compared to sieves with a diameter of 200 mm, a 2.25 times higher sieving surface is available. Therefore, the average sieving times can be greatly reduced with the AS 300 control. With its all-digital controls and calibration certificate the AS 300 control is indispensable for all users who attach importance to precision and operational convenience and need to comply with the guidelines of the ISO Application Examples cement clinker, chemicals, coffee, construction materials, fertilizers, fillers, flours, grains, metals powders, minerals, nuts, plastics, sand, seeds, soils, washing powder,... Product Advantages NEW: up to 99 sieving programs NEW: low noise operation thanks to optimized control NEW: USB connection for use of EasySieve software suitable for dry and wet sieving excellent separation efficiency even with short sieving times efficient electromagnetic drive 3-D throwing motion which ensures optimum use of the open sieve area and lets the sample move equally over the whole sieving surface setting of sieve acceleration "g" for comparable and reproducible sieving results worldwide sieve stack up to 450 mm height free digital adjustment of all process parameters (time, amplitude or sieve acceleration, interval) interval operation optional sieve software EasySieve for control of the shaker, easy evaluation and documentation of results fulfils all criteria for measuring equipment related to ISO 9001 calibration certificate easy operation (clamping), ergonomic design maintenance-free dry and wet sieving in one model page 1/33
2 Features Applications separation, fractioning, particle size determination Field of application agriculture, biology, chemistry / plastics, construction materials, engineering / electronics, environment / recycling, food, geology / metallurgy, glass / ceramics, medicine / pharmaceuticals Feed material Measuring range* Sieving motion Max. batch / feed capacity powders, bulk materials, suspensions 20 µm - 40 mm throwing motion with angular momentum 6 kg Max. number of fractions 9 / 17 Max. mass of sieve stack Amplitude Controlled amplitude Sieve acceleration Time display Interval operation 10 kg digital, > 2,20 mm yes Storable SOPs 99 Suitable for dry sieving Suitable for wet sieving Serial interface Including test certificate / can be calibrated > 10.0 g digital, 1-99 min 1-99 s Suitable sieve diameters &100 mm / 150 mm / 200 mm / 203 mm (8") / 305 mm / 315 mm Max. height of sieve stack Clamping devices yes yes yes yes 450 mm Protection code IP 54 / IP 20 Electrical supply data Power connection W x H x D Net weight "standard", "comfort", each for wet and dry sieving V, 50/60 Hz 1-phase 417 x 220 x 384 mm ~ 42 kg Standards CE Please note: *depending on feed material and instrument configuration/settings page 2/33
3 Videolink Function Principle The AS 300 works with an electromagnetic drive that is patented by RETSCH (EP ). This drive produces a 3D throwing motion that moves the product to be sieved equally over the whole sieving surface. The advantage: high stress capacity, extremely smooth operation and short sieving times with high separation efficiency. Order data for test sieves up to 305 mm / 12 Ø (please order clamping device, test sieves and collecting pan separately) AS 300 control, V, 50/60 Hz, incl. test report acc. to EN Clamping devices AS 300 max. number of fractions, for test sieves ø Clamping device standard, 9/17, 305 mm ø Clamping device comfort, 9/17, 305 mm ø Wet sieving clamping device standard, 9/17, 305 mm ø Wet sieving clamping device comfort, 9/17, 305 mm ø Sieve stacks and accessories AS Sieve stack consisting of 7 test sieves (ISO ), 305 mm Ø, 40 mm height (630 µm, 1.25 mm, 2.50 mm, 5 mm, 10 mm, 20 mm, 31.5 mm) and collecting pan Sieve stack consisting of 7 test sieves (ASTM E11), page 3/33
4 305 mm (12 ) Ø, 40 mm height (30 mesh, 16 mesh, 8 mesh, 4 mesh, 3/8, 3/4, 1 1/4 ) and collecting pan IQ/OQ Documentation for AS 300 control Accessories for clamping devices Clamping lids Clamping lid without window, for test sieves 100/150/200/203 mm Ø (only for use with threaded rods) Clamping lid with large window of Perspex, for test sieves 200/203 mm Ø Universal clamping lid with small window, for test sieves 100/150/200/203 mm Ø Universal wet sieving lid with small window, for test sieves 100/150/200/203 mm Ø Clamping lid with large window of Perspex, for test sieves 305 mm Ø Wet sieving lid, for test sieves 305 mm Ø Clamping elements Clamping nuts, (2 pieces), for clamping device economy and standard Quick-clamping elements, (2 pieces), for clamping device comfort AS 200/300/400 Clamping rods Threaded rods, (2 pieces), for clamping device economy and standard Threaded rods, short, (2 pieces), for clamping of max. 5 test sieves for clamping device economy and standard Rods, smooth, (2 pieces), for clamping device comfort AS 300/400 Sieving Aids Chain ring for test sieves 200 mm and 203 mm Ø to support horizontal sieving Brushes, 3 pieces Cubes of polyurethane, 12 x 12 x 12 mm, 10 pieces Cubes of polyurethane, 20 x 20 x 20 mm, 10 pieces Balls of rubber, 20 mm Ø, 5 pieces Balls of agate, 10 mm Ø, 10 pieces Balls of steatite, 6 mm Ø, 150 g Test Sieve Rack page 4/33
5 Test Sieve Rack for 10 Test Sieves Ø 200 mm/8, height 50 mm/25 mm Accessories for test sieves Test Sieves 200 mm Ø, height 50 mm Collecting pan, stainless steel, 200 mm Ø, height 50 mm Intermediate pan, stainless steel, 200 mm Ø, height 50 mm Intermediate ring, stainless steel, 200 mm Ø, height 50 mm Sieve lid, stainless steel, 200 mm Ø Collecting pan with outlet, stainless steel, 200 mm Ø, height 50 mm Venting ring for wet sieving, stainless steel, 200 mm Ø, height 25 mm O-ring for test sieves, 200 mm Ø Test Sieves 200 mm Ø, height 25 mm Collecting pan, stainless steel, 200 mm Ø, height 25 mm Intermediate pan, stainless steel, 200 mm Ø, height 25 mm Intermediate ring, stainless steel, 200 mm Ø, height 25 mm Sieve lid, stainless steel, 200 mm Ø Collecting pan with outlet, stainless steel, 200 mm Ø, height 50 mm Venting ring for wet sieving, stainless steel, 200 mm Ø, height 25 mm O-ring for test sieves, 200 mm Ø Test Sieves 203 mm Ø / 8 Ø, height Collecting pan, stainless steel, 8 Ø, height Intermediate pan, stainless steel, 8 Ø, height Intermediate ring, stainless steel, 8 Ø, height Sieve lid, stainless steel, 8 Ø Collecting pan with outlet, stainless steel, 8 Ø, height Venting ring for wet sieving, stainless steel, 8 Ø, page 5/33
6 height O-ring for test sieves, 8 Ø Test Sieves 203 mm Ø / 8 Ø, height Collecting pan, stainless steel, 8 Ø, height Intermediate pan, stainless steel, 8 Ø, height Intermediate ring, stainless steel, 8 Ø, height Sieve lid, stainless steel, 8 Ø Collecting pan with outlet, stainless steel, 8 Ø, height Venting ring for wet sieving, stainless steel, 8 Ø, height O-ring for test sieves, 8 Ø Test Sieves 100 mm Ø Collecting pan, stainless steel, 100 mm Ø, height 40 mm Intermediate ring, stainless steel, 100 mm Ø, height 40 mm Sieve lid, stainless steel, 100 mm Ø Collecting pan with outlet, stainless steel, 100 mm Ø, height 40 mm O-ring for test sieves, 100 mm Ø Test Sieves 150 mm Ø Collecting pan, stainless steel, 150 mm Ø, height 40 mm Sieve lid, stainless steel, 150 mm Ø Collecting pan with outlet, stainless steel, 150 mm Ø, height 40 mm O-ring for test sieves, 150 mm Ø Test Sieves 305 mm Ø Collecting pan, stainless steel, 305 mm Ø, height 40 mm Intermediate pan, stainless steel, 305 mm Ø, height 40 mm Intermediate ring, stainless steel, 305 mm Ø, height 40 mm Sieve lid, stainless steel, 305 mm Ø Collecting pan with outlet, stainless steel, 305 mm Ø, page 6/33
7 height 56 mm Venting ring for wet sieving, stainless steel, 305 mm Ø, height 40 mm O-ring for test sieves, 305 mm Ø Test Sieves 200 mm Ø x 50 mm height ISO 3310/1 stainless steel with wire gauze µm * µm * µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm page 7/33
8 µm * µm µm µm * µm µm µm * µm µm * µm µm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm page 8/33
9 mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * 200 mm Ø x 25 mm height ISO 3310/1 stainless steel with wire gauze µm * µm * µm * µm µm µm * µm µm * µm µm µm * page 9/33
10 µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm mm * mm mm mm * mm mm * mm mm mm * mm mm page 10/33
11 mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm page 11/33
12 mm * mm mm mm * 8" Ø x 2" height ISO 3310/1 stainless steel with wire gauze µm * µm * µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm page 12/33
13 µm µm * µm µm µm * µm µm * µm µm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * page 13/33
14 mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * 8" Ø x 1" height ISO 3310/1 stainless steel with wire gauze µm * µm * µm * µm µm µm * µm µm * µm µm µm * µm µm page 14/33
15 µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm page 15/33
16 mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * , mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm page 16/33
17 mm mm * 100 mm Ø x 40 mm height ISO 3310/1 stainless steel with wire gauze µm * µm * µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * page 17/33
18 µm µm µm * µm µm * µm µm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm page 18/33
19 mm * mm mm * mm mm mm * mm mm mm * mm 150 mm Ø x 40 mm height ISO 3310/1 stainless steel with wire gauze µm * µm * µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * page 19/33
20 µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm page 20/33
21 mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm 305 mm Ø x 40 mm height ISO 3310/1 stainless steel with wire gauze µm * µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * µm page 21/33
22 µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm µm * µm µm µm * µm µm * µm µm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * page 22/33
23 mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * mm mm mm * mm mm * mm mm mm * 200 mm Ø x 50 mm height ASTM E 11 stainless steel with wire gauze page 23/33
24 µm; 635 Mesh µm; 500 Mesh µm; 450 Mesh µm; 400 Mesh µm; 325 Mesh µm; 270 Mesh µm; 230 Mesh µm; 200 Mesh µm; 170 Mesh µm; 140 Mesh µm; 120 Mesh µm; 100 Mesh µm; 80 Mesh µm; 70 Mesh µm; 60 Mesh µm; 50 Mesh µm; 45 Mesh µm; 40 Mesh µm; 35 Mesh µm; 30 Mesh µm; 25 Mesh µm; 20 Mesh mm; 18 Mesh mm; 16 Mesh mm; 14 Mesh mm; 12 Mesh mm; 10 Mesh mm; 8 Mesh mm; 7 Mesh mm; 6 Mesh mm; 5 Mesh mm; 4 Mesh mm; 3.5 Mesh mm; 1/4 " mm; " mm; 5/16 " mm; 3/8 " mm; 7/16 " mm; 1/2 " mm; " mm; 5/8 " mm; 3/4 " page 24/33
25 mm; 7/8 " mm; 1 " mm; 1.06 " mm; 1 1/4 " mm; 1 1/2 " mm; 1 3/4 " mm; 2 " mm; 2.12 " mm; 2 1/2 " mm; 3 " mm; 3 1/2 " mm; 4 " mm; 4.24 " mm; 5 " 200 mm Ø x 25 mm height ASTM E 11 stainless steel with wire gauze µm; 635 Mesh µm; 500 Mesh µm; 450 Mesh µm; 400 Mesh µm; 325 Mesh µm; 270 Mesh µm; 230 Mesh µm; 200 Mesh µm; 170 Mesh µm; 140 Mesh µm; 120 Mesh µm; 100 Mesh µm; 80 Mesh µm; 70 Mesh µm; 60 Mesh µm; 50 Mesh µm; 45 Mesh µm; 40 Mesh µm; 35 Mesh µm; 30 Mesh µm; 25 Mesh µm; 20 Mesh mm; 18 Mesh page 25/33
26 mm; 16 Mesh mm; 14 Mesh mm; 12 Mesh mm; 10 Mesh mm; 8 Mesh mm; 7 Mesh mm; 6 Mesh mm; 5 Mesh mm; 4 Mesh mm; 3.5 Mesh mm; 1/4 " mm; " mm; 5/16 " mm; 3/8 " mm; 7/16 " mm; 1/2 " mm; " mm; 5/8 " mm; 3/4 " mm; 7/8 " mm; 1 " mm; 1.06 " mm; 1 1/4 " mm; 1 1/2 " mm; 1 3/4 " mm; 2 " mm; 2.12 " mm; 2 1/2 " mm; 3 " mm; 3 1/2 " mm; 4 " mm; 4.24 " mm; 5 " 8" Ø x 2" height ASTM E 11 stainless steel with wire gauze µm; 635 Mesh µm; 500 Mesh µm; 450 Mesh µm; 400 Mesh page 26/33
27 µm; 325 Mesh µm; 270 Mesh µm; 230 Mesh µm; 200 Mesh µm; 170 Mesh µm; 140 Mesh µm; 120 Mesh µm; 100 Mesh µm; 80 Mesh µm; 70 Mesh µm; 60 Mesh µm; 50 Mesh µm; 45 Mesh µm; 40 Mesh µm; 35 Mesh µm; 30 Mesh µm; 25 Mesh µm; 20 Mesh mm; 18 Mesh mm; 16 Mesh mm; 14 Mesh mm; 12 Mesh mm; 10 Mesh mm; 8 Mesh mm; 7 Mesh mm; 6 Mesh mm; 5 Mesh mm; 4 Mesh mm; 3.5 Mesh mm; 1/4 " mm; " mm; 5/16 " mm; 3/8 " mm; 7/16 " mm; 1/2 " mm; " mm; 5/8 " mm; 3/4 " mm; 7/8 " mm; 1 " mm; 1.06 " mm; 1 1/4 " page 27/33
28 mm; 1 1/2 " mm; 1 3/4 " mm; 2 " mm; 2.12 " mm; 2 1/2 " mm; 3 " mm; 3 1/2 " mm; 4 " mm; 4.24 " mm; 5 " 8" Ø x 1" height ASTM E 11 stainless steel with wire gauze µm; 635 Mesh µm; 500 Mesh µm; 450 Mesh µm; 400 Mesh µm; 325 Mesh µm; 270 Mesh µm; 230 Mesh µm; 200 Mesh µm; 170 Mesh µm; 140 Mesh µm; 120 Mesh µm; 100 Mesh µm; 80 Mesh µm; 70 Mesh µm; 60 Mesh µm; 50 Mesh µm; 45 Mesh µm; 40 Mesh µm; 35 Mesh µm; 30 Mesh µm; 25 Mesh µm; 20 Mesh mm; 18 Mesh mm; 16 Mesh mm; 14 Mesh mm; 12 Mesh mm; 10 Mesh page 28/33
29 mm; 8 Mesh mm; 7 Mesh mm; 6 Mesh mm; 5 Mesh mm; 4 Mesh mm; 3.5 Mesh mm; 1/4 " mm; " mm; 5/16 " mm; 3/8 " mm; 7/16 " mm; 1/2 " mm; " mm; 5/8 " mm; 3/4 " mm; 7/8 " mm; 1 " mm; 1.06 " mm; 1 1/4 " mm; 1 1/2 " mm; 1 3/4 " mm; 2 " mm; 2.12 " mm; 2 1/2 " mm; 3 " mm; 3 1/2 " mm; 4 " mm; 4.24 " mm; 5 " 100 mm Ø x 40 mm height ASTM E 11 stainless steel with wire gauze µm; 635 Mesh µm; 500 Mesh µm; 450 Mesh µm; 400 Mesh µm; 325 Mesh µm; 270 Mesh µm; 230 Mesh µm; 200 Mesh page 29/33
30 µm; 170 Mesh µm; 140 Mesh µm; 120 Mesh µm; 100 Mesh µm; 80 Mesh µm; 70 Mesh µm; 60 Mesh µm; 50 Mesh µm; 45 Mesh µm; 40 Mesh µm; 35 Mesh µm; 30 Mesh µm; 25 Mesh µm; 20 Mesh mm; 18 Mesh mm; 16 Mesh mm; 14 Mesh mm; 12 Mesh mm; 10 Mesh mm; 8 Mesh mm; 7 Mesh mm; 6 Mesh mm; 5 Mesh mm; 4 Mesh mm; 3.5 Mesh mm; 1/4 " mm; " mm; 5/16 " mm; 3/8 " mm; 7/16 " mm; 1/2 " mm; " mm; 5/8 " mm; 3/4 " mm; 7/8 " mm; 1 " mm; 1.06 " mm; 1 1/4 " mm; 1 1/2 " mm; 1 3/4 " 150 mm Ø x 40 mm height page 30/33
31 ASTM E 11 stainless steel with wire gauze µm; 635 Mesh µm; 500 Mesh µm; 450 Mesh µm; 400 Mesh µm; 325 Mesh µm; 270 Mesh µm; 230 Mesh µm; 200 Mesh µm; 170 Mesh µm; 140 Mesh µm; 120 Mesh µm; 100 Mesh µm; 80 Mesh µm; 70 Mesh µm; 60 Mesh µm; 50 Mesh µm; 45 Mesh µm; 40 Mesh µm; 35 Mesh µm; 30 Mesh µm; 25 Mesh µm; 20 Mesh mm; 18 Mesh mm; 16 Mesh mm; 14 Mesh mm; 12 Mesh mm; 10 Mesh mm; 8 Mesh mm; 7 Mesh mm; 6 Mesh mm; 5 Mesh mm; 4 Mesh mm; 3.5 Mesh mm; 1/4 " mm; " mm; 5/16 " mm; 3/8 " mm; 7/16 " mm; 1/2 " mm; " page 31/33
32 mm; 5/8 " mm; 3/4 " mm; 7/8 " mm; 1 " mm; 1.06 " mm; 1 1/4 " mm; 1 1/2 " mm; 1 3/4 " 305 mm Ø x 40 mm height ASTM E 11 stainless steel with wire gauze µm; 500 Mesh µm; 450 Mesh µm; 400 Mesh µm; 325 Mesh µm; 270 Mesh µm; 230 Mesh µm; 200 Mesh µm; 170 Mesh µm; 140 Mesh µm; 120 Mesh µm; 100 Mesh µm; 80 Mesh µm; 70 Mesh µm; 60 Mesh µm; 50 Mesh µm; 45 Mesh µm; 40 Mesh µm; 35 Mesh µm; 30 Mesh µm; 25 Mesh µm; 20 Mesh mm; 18 Mesh mm; 16 Mesh mm; 14 Mesh mm; 12 Mesh mm; 10 Mesh mm; 8 Mesh mm; 7 Mesh mm; 6 Mesh page 32/33
33 Powered by TCPDF ( Product Information mm; 5 Mesh mm; 4 Mesh mm; 3.5 Mesh mm; 1/4 " mm; " mm; 5/16 " mm; 3/8 " mm; 7/16 " mm; 1/2 " mm; " mm; 5/8 " mm; 3/4 " mm; 7/8 " mm; 1 " mm; 1.06 " mm; 1 1/4 " mm; 1 1/2 " mm; 1 3/4 " mm; 2 " mm; 2.12 " mm; 2 1/2 " mm; 3 " mm; 3 1/2 " mm; 4 " mm; 4.24 " mm; 5 " page 33/33
Feed material Measuring range* Sieving motion Max. batch / feed capacity powders, bulk materials, suspensions 25 µm mm throwing motion with angu
General Information The analytical sieve shaker AS 450 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The
More informationSieving for perfect quality control
Sieving for perfect quality control PARTICLE SIZING The widest range of sieving equipment in the world! RETSCH s line of sieving machines not only covers a wide measuring range. Thanks to various sieving
More informationAll you need for sieving
All you need for sieving VWR-Haver test sieve shakers VWR Collection test sieves and sieving accessories vwr.com Test Sieve shakers Quick release clamps Sound absorbing cabinets Software U ltrasonic sieving
More information3. Operating instructions: Minor 200
1. Technical specifications 3. Operating instructions: Minor 200 Copyright 2015 by Endecotts Ltd. 13 1. Setting up Technical specifications SIEVE SHAKER MODEL: Minor 200 General Information The Minor 200
More informationMeinzer II TM. Testing Sieve Shaker
Meinzer II TM Testing Sieve Shaker Operation & Set-up Manual Model: 18480100 CSC Scientific, Inc. 2799-C Merrilee Drive Fairfax, VA 22031 USA Telephone: (703) 876-4030 (800) 621-4778 Fax: 703-280-5142
More informationThermowell For sanitary applications Model TW61, for orbital welding
Thermowells Thermowell For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 74-06 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical industry,
More informationSimatec Maschinenbau AG. Into the future with innovative technology
Simatec Maschinenbau AG Into the future with innovative technology Simatec Maschinenbau AG Screening machines - made in Switzerland Simatec stands for technically innovative and customized screens for
More informationVertical Tensile Machine
Vertical Tensile Machine Code: 11.202.100 For the determination of force, tensile resistance, elongation and tensile energy absorption (TEA) in paper or tissue. Standards: ISO 1924-1, ISO 1924-2, ISO 1924-3,
More informationThermowell For sanitary applications Model TW61, for orbital welding
Thermowells Thermowell For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 Applications Sanitary applications Food industry Beverage industry Bio and pharmaceutical industry,
More informationThermowell For sanitary applications Model TW61, for orbital welding
Temperature For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 Applications for further approvals see page 5 Sanitary applications Food and beverage industry Bio and pharmaceutical
More informationSIFTOMAT Universal plansifter
SIFTOMAT Universal SIFTOMAT plansifter SiftomaT APPLICATIONS Users Sizing Control and safety sifting Dedusting TYPICAL APPLICATIONS Perfect sorting longs and twins of plastic granules Simultaneous dedusting
More informationBucket Elevator Belt Bucket Conveyor
Bucket Elevator TD belt bucket conveyor is suitable for density less than.5t/m3 lump, granular material such as coal, cement, fertilizer, sand, grain, etc.belt bucket conveyor has two types of bucket:
More informationEN. SKF Grease Spraying System For Large Open Gears. Extend the lifetime of large gear drives
1-4012-EN SKF Grease Spraying System For Large Open Gears Extend the lifetime of large gear drives Gear drives Large gear drives are used to transmit movement under very heavy loads. They are open gear
More informationSafety drying ovens with expanded temperature range
MDL series 115 Safety drying ovens Safety drying ovens with expanded temperature range The BINDER MDL, with enhanced control function, works at temperatures up to 350 C (662 F). It is it perfectly suited
More informationISO 659 INTERNATIONAL STANDARD. Oilseeds Determination of oil content (Reference method)
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 659 Fourth edition 2009-07-01 Oilseeds Determination of oil content (Reference method) Graines oléagineuses Détermination de la teneur en huile
More informationSafety drying oven with expended temperature range
MDL series 115 Safety drying ovens Safety drying oven with expended temperature range The BINDER MDL 115 with enhanced control function works at temperatures up to 350 C. This safety drying oven meets
More informationProduct Information. Mflow extrusion plastometer
CTA: 168424 169603 PI 781 0918 Applications As the volume of testing increases, so does the need for a greater degree of automation (compared to Cflow). Mflow is capable of modular expansion and can be
More informationAdvance - Elevating De Dusting Machine.
Formulation Process. Sub Category: Advance - Elevating De Dusting Machine. Formulation Process. Sub Category: Advance Dust Extractor Machine. Formulation Process. Sub Category: Advance Tablet Inspection
More informationRefrigerated incubator with Peltier technology
KT series 53 Incubators and cooling incubators Refrigerated incubator with Peltier technology The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness.
More informationInstruments for the Analysis of Petroleum Products. Oxidation Stability
Instruments for the Analysis of Petroleum Products Oxidation Stability What is Oxidation Stability? Oxidation stability describes the resistance of a material towards oxygen. This is a basic requirement
More informationHA Thickness Gauge IS:2386 (part 1)- 1963
AGGREGATE TESTING HA50.05 Mechanical Rotating Sample Divider (Motorised) IS : 1607-1960 For obtaining representative sample for sieve analysis. It is suitable for dry sands, fine powders, ores, refractory
More informationEBA 270 Small centrifuge
Small centrifuge Reliable: Excellent separation performance in medical practices www.hettichlab.com TAKE THE HASSLE OUT OF YOUR ROUTINE WORK: OPTIMUM PREPARATION OF SAMPLES ON A DAILY BASIS The is a small
More informationAXIAL FANS Axis / Tubo OPERATION MANUAL
TUBO-M AXIS-QA AXIS-Q AXIS-QR AXIS-F AXIS-QRA AXIAL FANS Axis / Tubo OPERATION MANUAL Axis / Tubo www.blaubergventilatoren.de CONTENT 3 Introduction 3 General 3 Safety rules 3 Transport and storage requirements
More informationHeating chamber with mechanical convection
FED series 240 Drying ovens / Heating ovens Heating chamber with mechanical convection The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly
More informationHeating chamber with mechanical convection
FED series 720 Drying ovens / Heating ovens Heating chamber with mechanical convection The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly
More informationHigh-quality pressure sensor with mounted diaphragm seal With clamp connection Model DSS22T
JUNE 2018 Pressure High-quality pressure sensor with mounted diaphragm seal With clamp connection Model DSS22T WIKA data sheet DS 95.08 TYPE EL Applications Hygienic pressure measurement in sanitary applications
More informationThermowell For sanitary applications Model TW61, for orbital welding
s For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 for further approvals see page 5 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical
More informationHeating chamber with mechanical convection
FED series 53 Drying ovens / Heating ovens Heating chamber with mechanical convection The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly
More informationHeating chamber with mechanical convection
FED series 53 Drying ovens / Heating ovens Heating chamber with mechanical convection The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly
More informationABRASION RESISTANCE - ROTAB AS/S
ABRASION RESISTANCE - ROTAB AS/S Description/Overview Abrasion in solid materials occurs because of the rubbing of solid pieces against each other (or any mechanical component). The rubbing typically takes
More informationVERTICAL FORM FILL SEAL MACHINES
VERTICAL FORM FILL SEAL MACHINES AUTOMATIC PACKAGING MACHINES 2 Vertical Form, Fill and Seal machines AVM AVM vertical Form, Fill and Seal (VFFS) machines automatically form a bag from a flat roll of film,
More informationSITRANS P measuring instruments for pressure
Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with
More informationFUEL STATION FOR INTERNAL USE KA
STATIONARY FUEL SYSTEMS FOR DIESEL RIETBERG CONTAINERS 07 FUEL STATION FOR INTERNAL USE KA [DIESEL] Their benefits Manufactured according to DIN 66/DIN 666 with German approval for storage of diesel/fuel
More informationkyalfa Laval LeviMag UltraPure, Magnetic Mixer
kyalfa Laval LeviMag UltraPure, Magnetic Mixer Levitated Magnetic Mixer Application Alfa Laval LeviMag UltraPure magnetic mixers offer effective mixing for multible processes within Pharmaceutical and
More informationUnigrout grouting platforms
Atlas Copco Ground Engineering Products Unigrout grouting platforms Unigrout Flex concept Unigrout Flex concept Since 1921 Atlas Copco is committed to grouting. Unigrout is a complete range of grouting
More informationFlow measurement FlexFlow PF20H Hygienic flow sensor
Product highlights Parallel measurement of flow and temperature Flow measurement independent of the mounting position Large measuring range up to 400 cm/s Measurement at high media temperatures up to 125
More informationAutoweigh Feeder Series 400 A New Generation of Weigh Feeders
Autoweigh Feeder Series 400 A New Generation of Weigh Feeders Simply The Best Narrow Width Weigh Feeder Money Can Buy Precise Measurement The Milltronics 400 Series is one of the most accurate in-motion
More informationSolidFlow. Monitoring of Solids. Product Information. SWR engineering Messtechnik GmbH
EN SolidFlow Product Information Monitoring of Solids SWR engineering Messtechnik GmbH Using SolidFlow is a sensor especially developed for measuring the flow rate of solids conveyed in metallic ducts.
More informationROTIXA 50 S/50 RS Floorstanding Centrifuges classic/cooled
ROTIXA 50 S/50 RS Floorstanding Centrifuges classic/cooled RoTIXA 50 S/50 RS Among experts ROTIXA has become a household word for high sample throughput. This is why ROTIXA models are the centrifuges of
More informationMVP DC SERIES. Diaphragm pumps as backing pumps for HiPace turbopumps
MVP DC SERIES Diaphragm pumps as backing pumps for HiPace turbopumps MVP DC SERIES Diaphragm pumps as backing pumps for HiPace turbopumps Clean, dry vacuum Low voltage 24 V DC Highly reliable Diaphragm
More informationHeating oven with mechanical control
ED series 23 Drying ovens / Heating ovens Heating oven with mechanical control The strength of the BINDER ED series heating oven: routine drying and sterilization applications up to 300 C. Thanks to the
More informationAgilent Turbo-V 750 and Turbo-V 850 TwisTorr. The new molecular-drag Technology
Agilent Turbo-V 75 and Turbo-V 85 TwisTorr The new molecular-drag Technology The new molecular-drag technology What is TwisTorr 2 Agilent Technologies, presents the new TwisTorr molecular drag technology
More informationModel ED 720 Drying and heating chambers Classic.Line with natural convection
Model ED 720 Drying and heating chambers Classic.Line with natural convection The strengths of a BINDER ED series drying chamber include routine drying and sterilization tasks up to 300 C. Thanks to the
More informationHDS 5/11 U. Fine-mesh water filter. Efficiently protects high-pressure pump against contamination. Easy to remove from outside.
HDS 5/11 U Competitively priced entry class model of a hot water high-pressure cleaner. Innovative "Upright"-Design ensures good mobility and ergonomics. Very user-friendly due to one-button-operation
More informationThe Powermatic User Guide Test Sieve Shaker
The Powermatic User Guide Test Sieve Shaker ISSUE 04-02 Contents Description Page 1 Setting Up: 2-8 Unpacking 2 Assembly 3-4 Levelling 4 Electrical Connections 5 Sieve Stacking 6-8 Operating Instructions
More informationMVP 015 DC SERIES. Diaphragm pumps as backing pumps for HiPace turbopumps
MVP 015 DC SERIES Diaphragm pumps as backing pumps for HiPace turbopumps MVP 015 DC SERIES Diaphragm pumps as backing pumps for HiPace turbopumps Clean, dry vacuum Low voltage 24 V DC Highly reliable Diaphragm
More informationFIRST FOR PORTABLE PARTICLE COUNTING
FIRST FOR PORTABLE PARTICLE COUNTING FS9V2-RH & FS9V2-RH-HP - particulate and relative humidity monitoring The FS9V2-RH Particle Pal displays live cleanliness readings for particulate (ISO/NAS/SAE) and
More informationServo-Torq Rim block cutter With integral roller in-feed & exit conveyor belt
Servo-Torq Rim block cutter With integral roller in-feed & exit conveyor belt The Servo-Torq Rim block cutters are ideal for use in-line after the plodder extruder. They can handle single, twin or even
More informationAgricultural Elevator Buckets
Agricultural Elevator Buckets standard duty DURA-BUKET STANDARD DUTY DURA-BUKET SS DURA-BUKET SS SUPER STRENGTH High Speed Centrifugal Discharge 220-900 FPM THE DURA-BUKET THE ORIGINAL PLASTIC ELEVATOR
More informationAlfa Laval Toftejorg Rotary Spray Heads MultiMidget & MultiMagnum
4102-0008 Instruction Manual Alfa Laval Toftejorg Rotary Spray Heads MultiMidget & MultiMagnum Covering: Standard versions IM-TE91A748-EN5 First published: 2014-04 ESE02830-EN5 2016-02 Original manual
More informationModel ED 400 Drying and heating chambers Classic.Line with natural convection
Model ED 400 Drying and heating chambers Classic.Line with natural convection The strengths of a BINDER ED series drying chamber include routine drying and sterilization tasks up to 300 C. Thanks to the
More informationPenetration. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
More informationProduct data sheet VAPODEST 50s / 50s carousel
VAPODEST 50S / 50S CAROUSEL - Systems in comparison Standard configuration VAP50s VAP50s carousel Automatic addition H 3 BO 3 Automatic addition H 2 O Automatic addition NaOH Programmable reaction time
More information- Quicktemp TP62/TW39...T500 -
Das modulare MODULAR von Hengesbach 2x transmitters TE42 each with 4...20mA, 2-L Redundant temperature measurement in heating lines, for example FEATURES 1 BASIC DEVICE - PROCESS ADAPTATION USING PROTECTIVE
More informationFlow VA 500/ 520. Flow sensors for compressed air and gases incl. temperature measurement. Verbrauch.
VA 500/ 520 Flow sensors for compressed air and gases incl. temperature Verbrauch 79 What are the advantages of the flow measuring technology of CS Instruments? 1) Even under pressure, the ow sensor VA
More informationDevelopment of Rattle Noise Analysis Technology for Column Type Electric Power Steering Systems
TECHNICAL REPORT Development of Rattle Noise Analysis Technology for Column Type Electric Power Steering Systems S. NISHIMURA S. ABE The backlash adjustment mechanism for reduction gears adopted in electric
More informationThermowell For sanitary applications Model TW22
Thermowells Thermowell For sanitary applications Model TW22 WIKA data sheet TW 95.22 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical industry, production of active
More informationQuality in vibrators. Pneumatic vibrators for industries. Conveying Filling Compacting Separating. data
Quality in vibrators Pneumatic vibrators for industries a.com l chnica e T d e l Detai indev f. w w :w data Conveying Filling Compacting Separating Findeva AG Loostrasse 2 CH-8461 Oerlingen Switzerland
More informationPortable Liquid Pump and Filter Systems Compressed Air-Powered Pump and Filter System
Portable Liquid Pump and Filter Systems Compressed Air-Powered Pump and Filter System Technical Bulletin C PORTABLE LIQUID PUMP AND FILTER SYSTEMS DESCRIPTION Filtration Systems Portable Liquid Pump &
More informationMass Comparators Advanced Radwag solutions for traceability of measurement
Mass Comparators Advanced Radwag solutions for traceability of measurement Automatic Mass Comparators COMPARISON OF 1 mg 1000 g WEIGHTS OF CLASS E1, E2, F1, F2, M1 AND M2 Automatic Mass Comparators UMA
More informationVFC-5 to VFC-500 FLO-COATER
VFC-5 to VFC-500 FLO-COATER OPERATION INSTRUCTIONS Page -1- CONTENTS PAGE NUMBER System Description... 2 Flo-Coater Description... 4 Operation of a Flo-Coater... 8 Selective Operator Control... 9 Operating
More informationConveyor Solutions. Trellex FLEXOPIPE
EN Trellex FLEXOPIPE 2 Trellex FLEXOPIPE flexible, unique, ecological! Conveyor belt systems of enclosed material transport are an excellent solution to various conveying problems. Metso is Europe s leading
More informationBrute Force and Two Mass Vibratory Feeders
Brute Force and Two Mass Vibratory Feeders Metering bulk materials into the process at rates of 1000 lbs. per hour through 6000 TPH www.renold.com For more than 65 years, many industries have relied on
More informationSystems. Dynamic Test. Electrodynamic Vibration Test Systems
Systems 100 - water 120 kn cooled Electrodynamic Vibration Test Systems SW3-10480APP (100KN) SW3-10LS3-550APP (100KN) SW3-10650APP (100KN) SW3-12480APP (120KN) SW3-12LS3-550APP (120KN) Dynamic Test Technical
More informationTECHINCAL DESCRIPTION BIO BAN
TECHINCAL DESCRIPTION BIO BAN LAF CABINET ARTICLE DESCRIPTION CODE BIOBAN 48 00303400000 BIOBAN 72 00303500000 ST-[BIOBAN]_EN-0 Rev. 0 of 16/06/2010 Introduction Designed for the situation where is requested
More informationHumidity Cabinet HYGROTHERM
Humidity Cabinet for humidty tests with international standards Humidity Cabinet HYGROTHERM 519 529 HYGROTHERM also available as semi-automatic or fully-automatic version (Mod. 519 SA / 519 FA) HYGROTHERM
More informationMagnetic Inductive Flow
GHM Messtechnik GmbH Hans-Sachs-Str. 26 93128 Regenstauf Germany Fon +49 (0) 9402-9383 - 0 Fax +49 (0) 9402-9383 - 33 www.ghm-messtechnik.de info@ghm-messtechnik.de Magnetic Inductive Flow Characteristics
More informationMKT 240 (E3) - Environmental simulation chamber for complex temperature profiles in the low temperature range
Environmental test chambers MKT 240 (E3) - Environmental simulation chamber for complex temperature profiles in the low temperature range The MKT test chambers meet all requirements for testing under extreme
More informationMicro Motion 7827 Digital Viscosity Meter
Product Data Sheet PS-001217, Rev. C April 2013 Micro Motion 7827 Digital Viscosity Meter Micro Motion viscosity meters are built to tackle the most demanding process and control applications. Rugged and
More informationROOF SPECIALIZED WORK LIGHTS FOR EXPLOSIVE AREAS
X ROOF SPECIALIZED WORK LIGHTS FOR EXPLOSIVE AREAS 01 INNOVATIVE EXPLOSION PROOF LED WORK LIGHTS SCANGRIP is first-mover when it comes to development of new and innovative LED work lights. Now, we are
More informationSafety drying ovens. Advantages: Areas of application: FDL series 115
FDL series 115 Safety drying ovens Safety drying ovens The BINDER FDL with silicone and dust-free inner chamber, as well as symmetric airflow dries specimens containing solvents perfectly and thus meets
More informationClimate chambers with illumination
KBW series (E5.1) Climate chambers with illumination Climate chambers with illumination The BINDER KBW series climate chamber with illumination achieves homogeneous light distribution and ensures consistent
More informationHeating oven with natural convection
ED series 23 Drying ovens / Heating ovens Heating oven with natural convection The strength of the BINDER ED series heating oven: routine drying and sterilization applications up to 300 C. Thanks to the
More informationCOMPACT PLANT FT620 FEEDER TROMMEL TECHNICAL SPECIFICATION
PLANT FT620 FEEDER TROMMEL TECHNICAL SPECIFICATION 1 GENERAL OVERVIEW FT620 FEEDER TROMMEL APPLICATIONS Construction & Demolition Waste Commercial & Industrial Waste Dry Mixed Recyclables Composting Municipal
More informationDarryl R. Rose VP Marketing Energex Inc.
Darryl R. Rose VP Marketing Energex Inc. Drose@energex.com QA Overview A QA program starts at the front end and continues throughout the entire process: Every raw material supplier is qualified prior to
More informationPCE-CS 300. Crane Scales up to 300 kg ( 661 lb)
300 Crane Scales PCE-HS N Series Crane Scales up to 150 kg ( 330 lb) powered by 3 x AA 1.5 V batteries auto power off (can be deactivated) PEAK and Hold functions / multiple taring animal weighing function
More informationLINEAR AND ROTATING TYPE AUTOMATIC SELF-CLEANING LIQUID FILTERS
AUTO-LINE LINEAR AND ROTATING TYPE AUTOMATIC SELF-CLEANING LIQUID FILTERS HiFlux Auto-line is designed as a compact self-cleaning filter Its robust construction makes it suitable for industrial applications
More information2018 HORIBA, Ltd. All rights reserved. 1
2018 HORIBA, Ltd. All rights reserved. 1 HORIBA Scientific Particle Characterization Dr. Anderson Bonon Key Points to Achieving Successful Laser Diffraction Method Development September 26, 2018 2018 HORIBA,
More informationDiaphragm monitoring system with clamp connection For sanitary applications Model DMS-FP
Pressure Diaphragm monitoring system with clamp connection For sanitary applications Model DMS-FP WIKA data sheet DS 95.20 Applications Hygienic pressure measurement for the pharmaceutical industry and
More informationTURBOMOLECULAR PUMPS ATP SERIES
TURBOMOLECULAR PUMPS ATP SERIES TURBOMOLECULAR PUMPS ATP SERIES Introduction The ATP conventional turbomolecular pumps have a proven track record of reliability. Rotors made exclusively from carefully
More informationGLASSCO LABORATORY EQUIPMENTS PVT. LTD.
PROGRAMMED FOR PRECISIO N GLASSCO LABORATORY EQUIPMENTS PVT. LTD. STAINLESS STEEL TOP Magnetic Stirrer with Hotplate - Analog Aluminium Moulded Construction Easy temperature & Stir controls Installed with
More informationkyalfa Laval LeviMag,MagneticMixer
kyalfa Laval LeviMag,MagneticMixer Levitated Magnetic Mixer Application Alfa Laval LeviMag magnetic mixers offer effective mixing for multiple processes within Dairy, Beverage and Food applications - eg
More informationHDS 5/15 UX. Integrated hose reel. Water fine filter. Innovative upright design. Compact design
HDS 5/15 UX Competitively priced entry class model of a hot water high-pressure cleaner. Innovative "Upright"-Design ensures good mobility and ergonomics. Very user-friendly due to one-button-operation
More informationMetallic materials Rockwell hardness test. Part 2: Verification and calibration of testing machines and indenters
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 6508-2 Third edition 2015-03-01 Metallic materials Rockwell hardness test Part 2: Verification and calibration of testing machines and indenters
More informationDispersed Water in Jet Turbine Fuels: Negating the Effect on Particle Counting
FOR IMMEDIATE RELEASE: 5 September 13 Dispersed Water in Jet Turbine Fuels: Negating the Effect on Particle Counting PARTICULATE IN JET FUELS WHY IS MEASUREMENT SO IMPORTANT? The issue of particulate contamination
More informationPMA 5. Pensky-Martens Flash Point Tester. ::: Volatility... Flammability
PMA 5 Pensky-Martens Flash Point Tester ::: Volatility... Flammability A Tradition of Competence 140 years of developing, producing and supporting excellent flammability instruments. 140 years of technology
More informationPF Pressure Plate Filter. Recovery of clear filtrates
PF Pressure Plate Filter Recovery of clear filtrates Administrative building of BHS-Sonthofen The company BHS-Sonthofen, headquartered in Sonthofen, Germany, is an owner-operated group of companies in
More informationHDS 6/12 C. Compact hot water high pressure cleaner with eco!efficiency mode and steam function. Efficiency. Storage. Ease of use.
HDS 6/12 C Compact hot water high pressure cleaner with eco!efficiency mode and steam function 1 2 3 4 1 2 Efficiency eco!efficiency mode economical and environmentally friendly, even during longer periods
More informationMAXI-LIFT AGRICULTURAL ELEVATOR BUCKETS UPGRADE TO THE TOUGHEST ELEVATOR BUCKETS TIGER-TUFF TIGER-CC HD-MAX HD-STAX CC-MAX DURA-BUKET MAXIMUM DUTY
MAXI-LIFT AGRICULTURAL AGRICULTURAL ELEVATOR BUCKETS UPGRADE TO THE TOUGHEST ELEVATOR BUCKETS TIGER-TUFF MAXIMUM DUTY TIGER-CC MAXIMUM DUTY HD-MAX HEAVY DUTY HD-STAX STACKABLE CC-MAX HEAVY DUTY DURA-BUKET
More informationSchindler 9300AE Simplicity Means Attention to Detail.
Simplicity Means Attention to Detail. Schindler Escalators and Moving Walks 2 Schindler 9300 Advanced Edition Moving Up to a New Level Sleek and stylish Schindler 9300 Advanced Edition escalators are at
More informationtest with confidence HV Series TM Test Systems Hydraulic Vibration
test with confidence HV Series TM Test Systems Hydraulic Vibration Experience. Technology. Value. The Difference. HV Series TM. The Difference. Our philosophy is simple. Provide a system designed for optimum
More informationSTABILITY TESTING CLIMATIC CHAMBER
STABILITY TESTING CLIMATIC CHAMBER (+5 C +80 C) (10% Rh 90% Rh) STKK-190 DF STKK-340 DF STKK-500 DF STKK-1000 DF STKK-1700 DF Perfect tool for stability testing in pharmaceutical Industry Following ICH
More informationModel ED 400 Drying and heating chambers Classic.Line with natural convection
Model ED 400 Drying and heating chambers Classic.Line with natural convection The strengths of a BINDER ED series drying chamber include routine drying and sterilization tasks up to 300 C. Thanks to the
More informationOff-line Oil Filter Module Pi 8400
Off-line Oil Filter Module Pi 8400 Volume flow l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
More informationBATCHFLUX 5500 C Technical Datasheet
BATCHFLUX 5500 C Technical Datasheet Electromagnetic flowmeter for volumetric filling machines High-stability zirconium oxide measuring tube Extreme long-term stability Most compact and lightweight design
More informationMechatronics Systems
Mechatronics Systems Mechatronics is that branch of engineering that deals with combined mechanical, electronic and software systems. The elements of mechatronics systems include sensors, actuators, microcontrollers
More informationSelective Laser Melting Machine
Selective Laser Melting Machine High-Performance machine with patented multi-beam technology for use in the production environment Selective Laser Melting Machine SLM 500 The Selective Laser Melting Machine
More informationDSL-240 MkIII Single Pass Dust Monitor Measures mg/m 3 using DDP
Ideal for monitoring dust levels in the exhaust gas of industrial combustion or air filtration processes. Innovative Dynamic Detection Principle (DDP) measurement technique Immune to gradual reductions
More informationScreening for Maximum Accuracy. Presented By: George Schlemmer
Screening for Maximum Accuracy Presented By: George Schlemmer Today s Agenda Screening to promote a safe, cost efficient operation. Value Chain Synopsis: The critical link a golf course green. Topics covered:
More informationsolids solutions group
Pneumatic dense phase conveying by a push conveying process with high load and slow conveying speed for gentle conveying. Hygienic-Dry Design according to EHEDG-Guidelines for dry processes with dry cleaning,
More information