NRM CLOSE-COUPLED CENTRIFUGAL PUMPS (2-4 Poles)
|
|
|
- Maryann Stewart
- 5 years ago
- Views:
Transcription
1 NRM OS-OUPD NTRIFUGA PUMPS (2-4 Pole) 79
2 NRM OS-OUPD NTRIFUGA PUMPS (2-4 Pole) The NRM erie i made up of ingle tage electric monoloc pump with a flanged hydraulic/motor connection. The pump caing i manufactured in accordance with the proviion of N733/DIN25. The pump may e intalled in all poition, except where the uction port i directed upward STRONG AND RSISTANT WID RANG IG YDRAUI PRFORMAN Application - Air conditioning and heating ytem - Pumping of water from lake, watercoure, well - Overhead or urface irrigation - Water upply ytem. - ooting and firefighting ytem. Motor - Type: induction, encloed, ventilated - evel of protection : IP 55 - Inulation cla F - Deign: 3/5 - Speed of rotation: NRM4 4 rpm NRM2 20 rpm Uage limitation - Type of liquid: non-aggreive, non-exploive, free from olid particle and fire. - ot water for heating - oolant - nvironmental temp.: max - Temperature of pumped liquid: Maximum operating preure: 0 ar DSIGN FATURS omponent Pump caing 2 Motor racket 3 Impeller 4 Shaft 5 Mechanical eal Material N GJ 0 ( ex G ) at iron N GJ 0 ( ex G ) at iron N GJ 0 ( ex G ) at iron AISI 4 tainle teel Silicum caride/silicum caride
3 Performance range NRM2 2 POS (m) 60 xx2 x x2 x x2 xx2 x 30 x xx60 xx25 x x x60 x x25 x x x60 x x25 x xx60 xx25 x x60 x x25 25x Q:(/min) 8
4 NRM2 X P kw 3 X 0 V Q AT003 NRM2 XX25 0,75 2/3 3,3/,9 5,5 4,5 3,5 2,5,5 0,3 2,5 7,5 6 AT005 NRM2 XX25,35 2/3 4,2/2,4, ,5,5 7,5 AT007 NRM2 XX25A 2,5 2/3 6,2/3,6,5 23, ,5 6,5 3 AT0 NRM2 XX60 2,7 2 2/3 7,7/4,4 28, ,5 26,5 25, AT03 NRM2 XX /3 /6,4 33,5 33, ,5 26,5 AT05 NRM2 XX60A 4 3 2/3 /6, , , ,5 AT09 NRM2 XX0 5,5 4 2/3 5,2/8,8 AT0 NRM2 XX0 3/ , ,5 37,5 35 AT02 NRM2 XX0 2/3 9,5/,3 7,5 5,5 AT0 NRM2 XX0 3/45, , , , AT023 NRM2 XX0A 2/3 23,3/3,5 8,5 6,3 AT0 NRM2 XX0A 3/45 3,5 62 6, ,5 49 AT027 NRM2 XX2 0 7,5 2/3 30/7, , , AT028 NRM2 XX2 3/45 7,3 AT029 NRM2 XX2 2/3 39/,5 3,5 0 AT030 NRM2 XX2 3/45,5 82 8,5 8, , AT0 NRM2 XX2A 7 2,5 3/ ,5 92 9,5 9, ,5 9 0,5 2 3,5 5 6,5 8 2 d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. NRM2 XX25 fig. a h 2 m n 4 2 W 0 Z NRM2 XX NRM2 XX25A ,5 NRM2 XX NRM2 XX NRM2 XX60A NRM2 XX ,5 NRM2 XX NRM2 XX0A NRM2 XX NRM2 XX NRM2 XX2A
5 NRM2 X P kw 3 X 0 V Q AT035 NRM2 XX25 2,5 2/3 6,2/3,6 5,5 5,3 5 4, 3,8 0,5 9 7 AT037 NRM2 XX25 2,7 2 2/3 7,7/4,4 9 8,8 8,5 7,5 6,5 5,5 4,5 3 0,5 AT039 NRM2 XX25A 4 3 2/3 /6,4,5,3 23,5 23,5 9 7 AT043 NRM2 XX /3 /6, , , ,5 8 AT045 NRM2 XX60A 5,5 4 2/3 5,2/8,8 36, ,5 34,5 33,5, AT046 NRM2 XX60A 3/45 8,8 AT049 NRM2 XX0 7,5 5,5 2/3 9,5/, , AT0 NRM2 XX0 3/45,3 AT05 NRM2 XX0 8,5 6,3 2/3 23,3/3,5 5, , ,5 37 AT052 NRM2 XX0 3/45 3,5 AT053 NRM2 XX0A 0 7,5 2/3 30/7,3 56, ,5 54, AT054 NRM2 XX0A 3/45 7,3 AT057 NRM2 XX2D 3,5 0 2/3 39/, , , AT058 NRM2 XX2D 3/45,5 AT060 NRM2 XX2 7 2,5 3/ , , ,5 60 AT062 NRM2 XX2 5 3/45 89, , , d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. NRM2 XX25 fig. a h 2 m n W Z ,5 NRM2 XX ,5 NRM2 XX25A NRM2 XX NRM2 XX60A NRM2 XX NRM2 XX ,5 NRM2 XX0A ,5 NRM2 XX2D NRM2 XX NRM2 XX
6 NRM2 X P kw 3 X 0 V Q AT0 NRM2 XX25 2,7 2 2/3 7,7/4,4 7 6,5 6 5, AT067 NRM2 XX /3 /6,4 2,5 9,5 9 8,3 7,5 6, AT069 NRM2 XX25A 5,5 4 2/3 5,2/8,8 25,5 25,3 25,5 23,5 23,5 2,5 8 AT0 NRM2 XX25A 3/45 8,8 AT073 NRM2 XX60 7,5 5,5 2/3 9,5/,3,5 3,5 3 30, , ,5 AT074 NRM2 XX60 3/45,3 AT075 NRM2 XX60A 2/3 30/7,3 0 7,5 AT076 NRM2 XX60A 3/45 7, , , , ,5, AT079 NRM2 XX0 3,5 0 2/3 39/,5 5, , ,5 37 AT0 NRM2 XX0 3/45,5 AT082 NRM2 XX0A 7 2,5 3/ , ,5 46,5 42,5 AT086 NRM2 XX2D 5 3/ , AT088 NRM2 XX2 25 8,5 3/45 38,5 79,5 78,5 77,5 76,5 75,5 74,5 73,5 67,5 AT0 NRM2 XX2 30 3/ ,8 9, fig. fig.2 n d hole ø e d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. NRM2 XX25 fig. a h 60 m n W 445 Z ,5 NRM2 XX ,5 NRM2 XX25A NRM2 XX ,5 NRM2 XX60A NRM2 XX0A NRM2 XX NRM2 XX2D NRM2 XX NRM2 XX
7 NRM2 X P kw 3 X 0 V Q AT093 AT094 NRM2 xx25 NRM2 xx25 5,5 4 2/3 3/45 5,2/8,8 8,8 7,5 7,3 7 6,5 6 5,5 4,5 2 9 AT0 AT096 AT097 AT098 AT003 AT004 AT006 AT008 AT02 AT04 AT06 NRM2 xx25 NRM2 xx25 NRM2 xx25a NRM2 xx25a NRM2 xx60 NRM2 xx60 NRM2 xx60 NRM2 xx60a NRM2 xx0d NRM2 xx0 NRM2 xx0 7,5 5,5 8,5 6,3 3, , ,5 30 2/3 3/45 2/3 3/45 2/3 3/45 3/45 3/45 3/45 3/45 3/45 9,5/,3,3 23,3/3,5 3,5 39/,5, ,8,6,8,6 30,5 36,5,3 9, ,5,3 23,5 23 2,5 9 30, , ,5 36, ,5 34, , ,5 9, ,8,5 39, , ,5 4, ,5 3, ,5 48,5 46,5 43,5 39, ,5 AT0 AT0 AT0 NRM2 xx2d NRM2 xx2 NRM2 xx /45 3/45 3/ , d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. fig. a h m n W Z NRM2 XX NRM2 XX NRM2 XX25A ,5 NRM2 XX NRM2 XX NRM2 XX60A NRM2 XX0D ,5 NRM2 XX NRM2 XX NRM2 XX2D NRM2 XX NRM2 XX
8 NRM2 X P kw 3 X 0 V Q AT027 AT028 AT030 AT0 AT036 AT038 AT0 AT042 AT046 NRM2 XX60D NRM2 XX60D NRM2 XX60 NRM2 XX60 NRM2 XX0D NRM2 XX0 NRM2 XX0 NRM2 XX0A NRM2 XX2D 3, , , /3 3/45 3/45 3/45 3/45 3/45 3/45 3/45 3/45 39/,5, , , ,3,5 3, ,5, ,5 45,5 44, , ,5 8, ,5 26, , ,8 56, , fig. fig.2 n d hole ø e d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. NRM2 XX60D fig. a 25 h 5 m 25 n W 6 Z NRM2 XX ,5 NRM2 XX ,5 NRM2 XX0D NRM2 XX NRM2 XX NRM2 XX0A NRM2 XX2D
9 NRM2 25X P kw X 0 V Q AT054 NRM2 25XX0D 30 3/ ,5 33 3,5 28 AT056 NRM2 25XX0 30 3/ , ,5 28,4 AT058 NRM2 25XX0 37 3/ , Dicharge head d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. NRM2 25XX0D NRM2 25XX0 NRM2 25XX0 0 0 fig. a h m n W Z
10 Performance range NRM4 4 POS (m) xx2 x xx60 xx25 x x x60 x x2 x x2 x x x60 x x25 xx2 x x x60 xx25 x x2 x x x60 25x x2 x25 25x x25 x2 2 x2 2x 4 x x Q:(/min) 88
11 NRM4 X P kw 3 X 0 V Q AT0 NRM4 XX25Y 0,33 0,25 2/3,46/0,85 4,4 4 3,5 3 2,2 AT067 NRM4 XX25X 0,33 0,25 2/3,46/0,85 6,2 6 5,8 5,2 4,5 3,9 3 AT073 NRM4 XX60X 0,5 0,37 2/3 2/,5 9,4 9,2 8,9 8,3 7,7 6,9 5,8 4,7 AT077 NRM4 XX0Y 0,75 2/3 3,3/,9 3 2,8 2,4,9,3 0,6 9, AT079 NRM4 XX0X,25 0,9 2/3 4,2/2,4 4,5 4,3 3,8 3,3 2,7,8 0, AT083 NRM4 XX2Y,5, 2/3 4,5/3,6 8,5 8,5 7, ,5 3,5 AT085 NRM4 XX2X 2,5 2/3 6,2/3,6 2,5 2,5 9,5 8 6, ,5 6 7,5 9 0,5 2 3,5 5 6,5 8 d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. a h m n NRM4 XX25Y ,5 NRM4 XX25X ,5 NRM4 XX60X NRM4 XX0Y NRM4 XX0X NRM4 XX2Y NRM4 XX2X
12 NRM4 X P kw 3 X 0 V Q AT089 NRM4 XX25Y 0,33 0,25 2/3,46/0,85 4,6 4,5 4,3 AT09 NRM4 XX25X 0,5 0,37 2/3 2/,5 6,3 6,2 6, AT097 NRM4 XX60X 0,7 0,5 2/3 2,8/,6 8,8 8,6 8,3 AT073 NRM4 XX0Y,5, 2/3 4,5/3,6 2,7 2,5 2, AT075 NRM4 XX0X,5, 2/3 4,5/3,6 4,2 4 3,8 AT079 NRM4 XX2Y 2,5 2/3 6,2/3,6 8,3 8 7,7 AT072 NRM4 XX2X 3 2,2 2/3 8,9/5,,5, ,5 9 0,5 2 3,5 5 6, , 6 8 3,9 3,6 3,3 2,9 2,4 5,8 5,5 5,2 7,7 7,3 6,9 4,9 4,6 3 6,4,7,2 0,7 0, 9,5 8,5 7 3,4 3 2, ,3 7,4 7 6,6 6,2 5,6 5 2,7 2,4 2,5 9,5 5,9 4,5 6 3,7 2 8,5 7 d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. a h m n NRM4 XX25Y ,5 NRM4 XX25X ,5 NRM4 XX60X NRM4 XX0Y NRM4 XX0X NRM4 XX2Y ,5 NRM4 XX2X
13 NRM4 X AT0725 NRM4 XX25Y P kw 0,5 0,37 AT0727 AT07 AT073 AT077 AT079 AT07233 NRM4 XX25X NRM4 XX60Y NRM4 XX60X NRM4 XX0Y NRM4 XX0X NRM4 XX2Y 0,7,25, ,5 0,75 0,9,,5 2,2 AT07235 NRM4 XX2X 4 3 2/3 2/3 2/3 2/3 2/3 2/3 2/3 2/3 3 X 0 V Q 2/,5 2,8/,6 3,3/,9 4,2/2,4 4,5/3,6 6,2/3,6 8,9/5, /6,4 9 5,3 6, ,5 2 3,5 5 6, ,3 5,2 5, 5 4,9 4,8 4,5 4, 3,6 3 6,3 6,2 6, 6 5,9 5,8 5,5 5,2 4,9 4,4 8,2 8 7,9 7,8 7,7 7,4 7 6, ,9 8,8 8,7 8,6 8,4 8, 7,7 7,2 6,5 5,5 2,4 2,2 2,8,5 0, ,8 4,3 4,2 4, 4 3,7 3 2,3,3 0,2 9, 7,8 6,4 5 8,5 8,3 8, 7,8 7,5 7 6,5 5,5 4,5 3,5 2,5,5 0,5,4,3,2 2,5,9,2 9,4 8,5 7,5 6,3 5 d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. a h m n NRM4 XX25Y NRM4 XX25X NRM4 XX60Y NRM4 XX60X NRM4 XX0Y NRM4 XX0X NRM4 XX2Y NRM4 XX2X
14 NRM4 X AT07 NRM4 XX25X AT075 NRM4 XX60Y AT077 NRM4 XX60X AT0725 NRM4 XX0Y AT07253 NRM4 XX0X AT07257 NRM4 XX2Y AT07258 NRM4 XX2Y AT07259 NRM4 XX2X AT07260 NRM4 XX2X P kw 0,75,5, 2,5 3 2, ,5 4 7,5 5,5 2/3 2/3 2/3 2/3 2/3 2/3 3/45 2/3 3/45 3 X 0 V Q 3,3/,9 4,5/3,6 6,2/3,6 8,9/5, /6,4 5,2/8,8 8,8 30/7,3 7, ,8 5,7 5,6 5,5 5,3 5, 4,9 4,5 4 8,6 8,5 8,4 8,3 8,2 8, 8 7,5 6, ,2 0, 0 9,9 9,8 9,6 9,4 9 8,5 7,7 2,5 2,4 2,3 2,2 2,,7, 0,5 9,6 8,5 5,2 5, 5 4,6 4,3 3,6 2,8 2 9,5 9,3 9, 8,5 7,5 6,5 5,5 4 2,5 0,5 23,8,6,2 2,4,6 9,7 8,7 7,5 6 4 d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. a h m n NRM4 XX25X NRM4 XX60Y ,5 NRM4 XX60X NRM4 XX0Y NRM4 XX0X NRM4 XX2Y NRM4 XX2X
15 NRM4 X P kw 3 X 0 V Q AT07263 AT072 NRM4 XX60Y NRM4 XX60X 2,5 3 2,2 2/3 2/3 6,2/3,6 8,9/5, 7,7 9,7 7,6 9,6 7,5 9,5 7,3 9, ,7 8,8 6,4 8,5 6, 8,2 5,8 7,9 5,4 7,5 5 7, 6 AT07269 AT072 AT07272 AT07275 AT07276 NRM4 XX0Y NRM4 XX0X NRM4 XX0X NRM4 XX2Y NRM4 XX2Y 4 3 5,5 4 7,5 5,5 2/3 2/3 3/45 2/3 3/45 /6,4 5,2/8,8 8,8 9,5/,3,3 2,9,7,5,3 0,5 0 9,5 9 4,5 4,4 4,2 4 3,8 3,5 3, 2,7 2,2,6 9 8,5 8 7,5 7 6,5 8, ,5 4 2 AT07277 NRM4 XX2X 0 7,5 AT07278 NRM4 XX2X 2/3 3/45 30/7,3 7,3 2,9 2,7 2,5 2, ,5 d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. a h m n NRM4 XX60Y NRM4 XX60X NRM4 XX0Y NRM4 XX0X NRM4 XX2Y NRM4 XX2X
16 NRM4 25X P kw AT0728 NRM4 25XX0Y AT07282 NRM4 25XX0Y 5,5 4 AT07283 NRM4 25XX0X AT07284 NRM4 25XX0X 7,5 5,5 AT07287 NRM4 25XX2Y 0 7,5 AT07288 NRM4 25XX2Y AT072 NRM4 25XX2X 2,5 9,2 2/3 3/45 2/3 3/45 2/3 3/45 3/45 3 X 0 V Q 5,2/8,8 8,8 9,5/,3,3 30/7,3 7, , , ,8,6,4,2 0,3 9,3 4,5 4,4 4,2 4 3,8 3,6 3,4 2,8 2 8,2 9,5 9,3 9, 8,9 8,7 8,5 7,5 6,5 5,2 2,9 2,8 2,7 2,6 2,5,5 9,5 8,5 6, ,8 8, d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. a h m n NRM4 25XX0Y NRM4 25XX0X NRM4 25XX2Y NRM4 25XX2X
17 NRM4 X25 P kw 3 X 0 V Q AT073 AT074 NRM4 X25X0W NRM4 X25X0W 7,5 5,5 2/3 3/45 9,5/,3,3 0,4 0,2 9,4 8,3 6,8 AT075 AT076 AT077 AT078 NRM4 X25X0Z NRM4 X25X0Z NRM4 X25X0Y NRM4 X25X0Y AT0740 NRM4 X25X0X 0 7,5 0 7,5 2,5 9,2 2/3 3/45 2/3 3/45 3/45 30/7,3 7,3 30/7,3 7,3 9,6 3 4,3,5 2,8 4,2 0,9 2,3 3,8 9,9,6 3,2 8,6 0,5 2,3 7 9,, 7,5 9,6 8 AT0746 NRM4 X25X2Z AT0748 NRM4 X25X2Y 5 5 3/45 3/45,5 27,8 7 6,6 9,8 5,7 9 4,4 8 2,6 6,6 5 AT074 NRM4 X25X2X 5 3/45 27,8,8 9,7 8,6 7 5,2 3,2 d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. a h m n NRM4 X25X0W NRM4 X25X0Z NRM4 X25X0Y NRM4 X25X0X NRM4 X25X2Z NRM4 X25X2Y NRM4 X25X2X
18 NRM4 0X P kw 3 X 0 V Q AT07423 AT074 AT07426 AT07428 AT07430 NRM4 0XX0W NRM4 0XX0W NRM4 0XX0Z NRM4 0XX0Y NRM4 0XX0X 0 7,5 2,5 9, /3 3/45 3/45 3/45 3/45 30/7,3 7,3 9,5 27,8 0,4,5 9,7 0,9 3,3 4,5 8,9 0,2 2,6 4 7,9 9,3 2 3,2 6,7 8,3, 2,5 5,5 7 0,,6 5,8 9 0,6 7,6 9,4 8 d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. a h m n NRM4 0XX0W NRM4 0XX0Z NRM4 0XX0Y NRM4 0XX0X
19 NRM4 2X0 P kw 3 X 0 V Q AT07434 AT07436 AT07438 AT074 NRM4 2X0X2W NRM4 2X0X2Z NRM4 2X0X2Y NRM4 2X0X2X ,5 8,5 3/45 3/45 3/45 3/ Dicharge head 3,5 4, ,4 3,5,8 3,2 2,4 7 6,5 6 5,4 4,7 8,6 8 7,6 7 6,4 0,5,7 4 5,8 9 0,2 2,4 0,5 4,3 2,5 0,6 d e TA OF SIZS AND WIGTS Motor m a Dimenion mm. a h m n NRM4 2X0X2W NRM4 2X0X2Z NRM4 2X0X2Y NRM4 2X0X2X
STANDARDIZED MONOBLOC CENTRIFUGAL PUMPS (2-4 POLE) RUGGED AND RESISTANT, WIDE RANGE, HIGH HYDRAULIC PERFORMANCE
NOCCHI NRM RUGGED AND RESISTANT, WIDE RANGE, HIGH HYDRAULIC PERFORMANCE Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 The pumps in the NRM series are monobloc single
Underground ball valves JIP for pre-insulation
Data heet Decription Danfo JIP underground ball valve are deigned for ditrict heating ytem and other cloed loop water ytem where the water i treated to avoid internal corroion. aving a fully welded body,
Here are the dimensions for your product group N.
Here are the dimenion for your produt group N. Overview of all dimenion > a i Pump rewed onnetion, length Size a a1 a2 a3 a4 a5 m m1 m2 m3 n n1 n2 n3 3 i 01-48 54 107 598-175 - 42 117-42 16 32-16 12 12
Gas Delivery Components
A DVA CED PREURE TECHOLOGY Gas Delivery Components Condensed Catalog DECEMBER 2017 687 Technology ay apa, CA 94558 (707) 259-0102 www.aptech-online.com HMI17391/December2017 Pressure Regulators & Bellows
How to select parts to build an MGO series progressive divider valve assembly, with SAE threading.
How to select parts to build an MGO series progressive divider valve assembly, with SAE threading. A simple MGO assembly consists of these basic parts: 1. Inlet 2. Valve sections 3. End section 4. Tie
Quality and Service Worldwide. Clamps
Quality and ervice Worldwide Clamps TANDARD-ERIE ORDER CODE-COMPONENT acc. to DIN 3015, Part 1 DEIGN OPTION Metric Threaded Components tainless teel Components Available 304/316 pecial Materials Available
Industrial Shock Absorbers MC33 to MC64
Indutrial Shock Aborber MC33 to MC64 Self-Compenating Thi range of elf-compenating hock aborber i part of the innovative MAGUM erie from ACE. You profit from the enhanced product life in the mot difficult
LinMot Industrial Linear Motors
Linear Motor Electronic nameplate and poition enor Stator winding and temperature enor Slider with neodymium magnet Stacking Loading Load mounting LinMot Indutrial Linear Motor Palletizing Alignment LinMot
NEMA Premium Efficiency Motors SIE series
NEMA Premium Efficiency Motors IE series NEMA Premium 2015 Product Catalogue MOTEUR 'PREMIUM EFFICIENCY' CERTIFIÉ ET VERIFIÉ CA (UA) BATI EN FONTE ERVICE FACTOR JUQU'À 1.40 IOLATION DE CLAE F (155 C),
LORO-X Downpipes (Art.-No. and dimensions see pages 22-39) LORO-X Sealing elements (Art.-No. and dimensions see page 27)
Application LORO-Standpipe LORO-X Downpipe (Art.-No. and dimenion ee page 22-39) LORO-X Sealing element (Art.-No. and dimenion ee page 27) LORO-X Offet pipe mit Sprung e = 200mm, 130 mm oder 75 mm (Art.-No.
Heavy Industrial Shock Absorbers CA2 to CA4
Heavy Indutrial Shock Aborber CA2 to CA4 Self-Compenating 56 The CA2 to CA4 complete the ACE product range of elf-compenating hock aborber. With thee unit ACE ha a continou range of elf-compenating unit
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 437 Safety Relief Valve pring loaded Metric + US Unit Fact The-Safety-Valve.com Deign 40 Cap H2 18 Adjuting crew with buhing 19 Lock nut 16 Spring plate 12 Spindle 54 Spring Axial needle 69 beering
Pressostat P/PS 900/904/912. Applications. Features
Preotat Swi baed Trafag i a leading international upplier of high quality enor and monitoring intrument for meaurement of preure and temperature. Application Shipbuilding Engine manufacturing Railway Machine
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 438 Safety Relief Valve pring loaded Metric + US Unit Fact The-Safety-Valve.com Deign 40 Cap H2 18 Adjuting crew with buhing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring
B2XTM B2X B2X-18P SERIES SERIES MID-RANGE 2-STAGE FIRE PUMP PORTABLE. Applications
DATA SHEET B2X B2XTM SERIES SERIES B2X18P PORTABLE MIDRANGE 2STAGE FIRE PUMP Deigned for Fire Department, Fire Agencie and OEM who need a true portable fire pump the WATERAX B2X i a veratile MidRange portable
How to select parts to build an MX series progressive divider valve assembly, with NPT threading.
How to select parts to build an MX series progressive divider valve assembly, with NPT threading. A simple MX assembly consists of these basic parts: 1. Inlet 2. Valve sections 3. End section 4. Tie Rods
Aqueducts Irrigation Water distribution Industrial applications APPLICATION DATA
NOCCHI NRB STANDARDIZED CLOSE COUPLED CENTRIFUGAL PUMPS (2-4 POLE) RUGGED AND RESISTANT, WIDE RANGE Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 The electric pumps
Goulds Double Suction Pumps
Double uction Pumps Designing and Manufacturing Dependable Centrifugal Pumps for Over 125 Years. Model 3498 pumping drinking water through a distribution network in the Western United tates. All 316 stainless
equipment transformers single-phase
equipment tranformer connection trip upplied up to 450 V (except at.no 428 46) 428 40 + 428 99 428 41 upplied with connection trip 428 75 427 92 IP 2X or XX up to 450 V (up to 310 V in 12-24 V) - IK 04
Industrial Shock Aborbers MA and ML33 to 64
Indutrial Shock Aborber MA and ML33 to 64 Thi adjutable hock aborber from ACE i unique. The innovative MAGUM erie model provide the next generation of deceleration technology to meet the need of the future.
Hygiene Right Angle Control Valve 6020
N 15 up to N 4 with integrate igital poitioner for application in foo proceing (Type 847, 849) Pneumatic control valve with right angle boy eign an integrate poitioner for application in foo proceing an
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 438 Safety Relief Valve pring loaded Metric + US Unit Fact The-Safety-Valve.com Deign 40 Cap H2 18 Adjuting crew with buhing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring
NRB CENTRIFUGAL PUMPS WITH BASE-PLATE AND COUPLING. NORMALIZED DIMENSIONS DIN UNI EN733
NRB CENTRIFUGAL PUMPS WITH BASE-PLATE AND COUPLING. NORMALIZED DIMENSIONS DIN 5 - UNI 77 - EN7 99 NRB HORIZONTAL CENTRIFUGAL PUMPS WITH BASE-PLATE AND COUPLING (2 AND POLES) NRB pumps, centrifugal single
MONOBLOC CENTRIFUGAL ELECTRIC PUMP IN COMPLIANCE WITH EN 733 in cast iron
Cast iron monobloc centrifugal electric pumps in compliance with EN 733. APPLICATIONS Moving clean water for civil, agricultural, industrial use, pressure boosting units, heating and air conditioning plants
Data sheet: Wilo-CronoLine-IL 65/130-4/2
Data sheet: Wilo-CronoLine-IL 65/13-4/2 Pump curves 2-pole, 5 Hz H[m] 32 28 24 I 2 I 16 12 8 4 2 4 6 8 1 5 1 15 2 25 3 Q[l/s] P 2 [kw] Ø 14 6 Ø 127 4L Ø 117 2 Ø 18 2 4 6 8 1 η p[%] Qmin IL 65/14-5,5/2
Data sheet: Wilo-CronoLine-IL 50/200-1,5/4
Data sheet: Wilo-CronoLine-IL 5/2-1,5/4 Pump curves 4-pole, 5 Hz H[m] 18 16 14 12 1 8 6 4 2 1 2 3 4 5 4 8 12 Q[l/s] P 2 [kw] Ø 28 1,5 Ø 197 1,,5 1 2 3 4 5 η p[%] Qmin Wilo-CronoLine-IL 5/22 - Wilo-CronoLine-IL
Data sheet: Wilo-CronoLine-IL 50/120-2,2/2
Data sheet: Wilo-CronoLine-IL 5/12-2,2/2 Pump curves 2-pole, 5 Hz H[m] 28 24 2 Qmin IL 5/14-3/2 IL 5/13-3/2 Wilo-CronoLine-IL 5/14 - Wilo-CronoLine-IL 5/11 IL 5/14-4/2 Approved fluids (other fluids on
Data sheet: Wilo-CronoLine-IL 80/145-1,1/4
Data sheet: Wilo-CronoLine-IL 8/145-1,1/4 Pump curves 4-pole, 5 Hz H[m] 12 1 8 6 4 2 2 4 6 8 1 5 1 15 2 25 3 P 2 [kw] 2, 1,5 Ø 156 1, Ø 144,5 Ø 133 2 4 6 8 1 η p[%] Qmin IL 8/17-2,2/4 IL 8/16-1,5/4 IL
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
TC-200 Series. Application. Features. Applicable Literature. Single Bulb Thermostats General Instructions
T-200 Serie Single ulb Thermotat General Intruction Application Thee unit are ued for on-off control of media temperature in duct, tank, etc. Feature Mechanim encloed in rugged die cat cae with metal cover.
50/60Hz DOOCH PUMP. 두크펌프 Horizontal centrifugal pump. Water supply system. Washing system. Industrial plants
DOOC PUMP orizontal centrifugal pump DF/DM 5/6z DM SERIES Water supply system Washing system Industrial plants air conditioning system Cooling system sprinkler 두크펌프 www.doochpump.com CONTENTS DF Series
Data sheet: Wilo-VeroLine-IPL 100/ /4
Data sheet: Wilo-VeroLine-IPL 1/145-1.5/4 Pump curves 4-pole, 5 Hz H[m] Qmin 1 8 Wilo-VeroLine-IPL 1/175 - Wilo-VeroLine-IPL 1/135 Approved fluids (other fluids on request) Heating water (in accordance
Data sheet: Wilo-VeroLine-IPL 65/ /2
Data sheet: Wilo-VeroLine-IPL 65/145-5.5/2 Pump curves 2-pole, 5 Hz H[m] 3 25 15 5 Qmin IPL 65/155-5,5/2 Wilo-VeroLine-IPL 65/155 - Wilo-VeroLine-IPL 65/145 IPL 65/145-5,5/2 IPL65/155-7,5/2 5 3 4 5 6 7
EVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
Data sheet: Wilo-VeroTwin-DPL 65/ /2
Data sheet: Wilo-VeroTwin-DPL 65/175-5.5/2 Pump curves 2-pole - individual operation H[m] 35 3 25 2 Qmin DPL 65/175-5,5/2 Wilo-VeroTwin-DPL 65/175 - Wilo-VeroTwin-DPL 65/165 DPL 65/175-7,5/2 DPL 65/165-5,5/2
OUTLINE DIMENSIONS HIGH PRESSURE PUMP HPW 220/50-70 HIGH PRESSURE PUMP HPW 220/50-70-PA
1/6 February 2014 JLe OUTLINE DIMENION Dynaset HPW pump gives great water power with small amount of water in relation to its size. As self-priming it is productive even in hard environment. mall size,
DT6 TRIPLE VANE PUMPS DT6 TRIPLE VANE PUMPS ORDERING CODE DATA SHEET. 84 tdz.com bezares.com. Seal Class. Design letter
DT6 TRIPLE VANE PUMP DT6 TRIPLE VANE PUMP ORDERING CODE DATA HEET DT6-DCC-B- I 6/38/70-1-R-00-B-1-00 pecial threads(ask for available threads) UNC: 00, 01 Metric: M0, M1 eal Class Design letter 1:NBR 5:VITON
Electric Actuator PM-L Series
Electric Actuator P-L Serie ISO 900 : 000 P-L LINEAR ELECTRIC ACTUATOR PNEU-AX control deign, produce and provide high quality electric actuator and ervice related to indutrial valve automation and control.
XVM. Vertical, Multi-Staged Stainless Steel Pumps FEATURES APPLICATIONS
Vertical, Multi-Staged Stainless Steel Pumps FEATURES The pump is a non-self-priming vertical multistage centrifugal pump coupled to a standard motor. Inlet and outlet are located at the bottom at the
SIVACON The Versatile Low-Voltage Switchboard
Control & Ditribution Ditribution Board & Motor Control Center SIVACON The Veratile Low-Voltage Switchboard SIVACON A&D CD DM PM, 1004 Power Ditribution Board 1 Control & Ditribution Ditribution Board
EVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
CP Centrifugal pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS PATENTS - TRADE MARKS - MODELS CONSTRUCTION AND SAFETY STANDARDS
CP Centrifugal pumps PERFORMANCE RANGE Flow rate up to 900 l/min (54 m³/h) Head up to 74 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
Data sheet: Wilo-VeroTwin-DPL 40/ /4
Data sheet: Wilo-VeroTwin-DPL 4/13-.2/4 Pump curves 4-pole - individual operation H[m] 8 7 6 4 3 2 1 P 2 [kw],4,2 η p[%] 6 4 2 1 2 3 4 6 7 Qmin Pump curves Wilo-VeroTwin-DPL 4/16 - Wilo-VeroTwin-DPL 4/13
CENTRIFUGAL PUMPS according to DIN standard
CENTRIFUGAL PUMPS according to DIN 2255 standard End suction centrifugal pumps in accordance with DIN 2255 made of cast iron, applications in water boosting, heating system, airconditioning, washing systems
Metallic trip Standard thickne of the metallic trip i 0.2 mm (0.18). MATERIALS FOR METALLIC STRIP ASTM DIN Material No. AISI AISI 316, 316
MS 10 PROPERTIES AND APPLICATION Spiral wound gaket are pecial emi-metallic gaket of great reilience, there fore they are very uitable for application featuring heavy operating condition. Spiral wound
Heavy Industrial Shock Absorbers CA2 to CA4
Heavy Indutrial Shock Aborber CA2 to CA4 Self-Compenating 50 The CA2 to CA4 complete the ACE product range of elf-compenating hock aborber. With thee unit ACE ha a continou range of elf-compenating unit
World Leader In Variable Speed Motor Products
World Leader In Variable Speed Motor Product Baldor offer the widet, mot comprehenive product line of motor deigned pecifically for variable peed control. More product and more capability than any other
CLS Series. Compact Linear motor Stage. Patent pending CLS-01-O81-EN
CLS Serie Compact Linear motor Stage cpc reerve the right to revie any information(technical detail) any time without notice, for printing mitake or any other incidental mitake. We take no reponibility.
barmesapumps.com VERTICAL MULTI-STAGE PUMP PERFORMANCE CURVE NOMENCLATURE B M V
VERTICAL MULTI-STAGE PUMP The BMV pump is designed to handle neutral clean liquids. It is a multifunctional product designed to transfer and boost water from various sources. The BMV pump is also designed
World Leader In Variable Speed Motor Products
World Leader In Variable Speed Motor Product Baldor offer the widet, mot comprehenive product line of motor deigned pecifically for variable peed control. More product and more capability than any other
Data sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
T: +44 (0) F: +44 (0) E:
CONTROL UNIT AE s control s offers a good working environment, adapted to all types of facilities. The right choice of control s is energy-saving and provides the lowest possible noise levels. automation
Vertical, Multi-Staged Stainless Steel Pumps
Vertical, Multi-Staged Stainless Steel Pumps www.masflo.fr FEATURES The XVM pump is a non-self-priming vertical multistage centrifugal pump coupled to a standard motor. Inlet and outlet are located at
PUMPS SURFACE C ATA L OGU E SURFACE PUMPS
SURFACE C ATA L OGU E PUMPS SURFACE PUMPS www.vansan.co.za IDB Series Peripheral Pumps 8 ISO2548-C 22V/5HZ 6 4 2 5 1 2 25 35 4 45 l/min IDB4 IDB35 IDB6 IDB7.3.6.9 1.2 1.5 1.8 2.1 2.4 2.7 m 3 /h Ampere
World Leader In Variable Speed Motor Products
World Leader In Variable Speed Motor Product Baldor offer the widet, mot comprehenive product line of motor deigned pecifically for variable peed control. More product and more capability than any other
Data sheet: Wilo-VeroLine-IPL 65/ /2
Data sheet: Wilo-VeroLine-IPL 65/115-1.5/2 Pump curves 2-pole, 5 Hz H[m] 16 14 12 1 8 6 4 2 1 2 3 4 5 2 4 6 8 1 12 14 16 P 2 [kw] 1,6 1,2,8,4 1 2 3 4 5 η p[%] 8 6 Qmin 4 2 1 2 3 4 5 Dimension drawing 8
World Leader In Variable Speed Motor Products
World Leader In Variable Speed Motor Product Baldor offer the widet, mot comprehenive product line of motor deigned pecifically for variable peed control. More product and more capability than any other
Electric Linear Actuator IQL Series
Electric inear Actuator IQ Serie BS E IS 9: IQ IEAR EETRI ATUATR I-tork control deign, produce and provide high quality electric actuator and ervice related to indutrial valve automation and control. IQ
Company name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 14/03/2017
Position Qty. Description 1 CR 32-3-2 A-F-A-E-HQQE Phone: 8 61 Date: 1/3/217 Product No.: 961221 Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range:
Stainless Steel Centrifugal Pump Type 3 SERIES
PUMP Stainless Steel Centrifugal Pump Type APPLICATIONS Water supply to civil, agricultural and industrial plants Pressure boosting Fire-fighting, heating systems and air-conditioning Moving industrial
Company name: GRUNDFOS (Singapore) Pte. Ltd. Created by: Angie Ang Phone: Date: 23/03/2017
Position Qty. Description 1 CR 15-7 A-F-A-E-HQQE Date: 3/3/17 Product No.: On request Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range: -.. 1 C
Data sheet: Wilo-CronoLine-IL 65/160-5,5/2
Data sheet: Wilo-CronoLine-IL 65/16-5,5/2 Pump curves 2-pole, 5 Hz H[m] 45 4 35S 3 25 2 15 1 5 P 2 [kw] 12 2 4 6 8 1 Q[m³/h] 8 4 Qmin IL 65/16-5,5/2 IL 65/17-11/2 IL 65/15-5,5/2 Wilo-CronoLine-IL 65/17
Data sheet: Wilo-VeroTwin-DPL 50/ /4
Data sheet: Wilo-VeroTwin-DPL 5/6-.55/ Pump curves -pole - individual operation H[m] 7 6 5 P [kw],6,, η p[%] 6 Qmin Wilo-VeroTwin-DPL 5/6 - Wilo-VeroTwin-DPL 5/ DPL 5/-,7/ DPL 5/6-,55/ 6 Ø 7 Pump curves
CVM. EBARA PUMPS EUROPE S.p.A. MULTISTAGE CENTRIFUGAL PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 kw) 203 PERFORMANCE CURVE A (FROM 0.75 kw UP TO 1.1 kw) 204 PERFORMANCE CURVE
Industrial Shock Absorbers MC33 to MC64
Indutrial Shock Aborber MC33 to MC64 40 Thi range of elf-compenating hock aborber i part of the innovative MAGUM erie from ACE. You profit from the enhanced product life in the mot difficult operating
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE HIGH PRESSURE MATERIAL REGULATOR
OPERATOR MANUAL INCLUDING: OPERATION, INTALLATION & MAINTENANCE HIGH PREURE MATERIAL REGULATOR RELEAED: 7-20-14 (REV. A) READ THI MANUAL CAREFULLY BEFORE INTALLING, OPERATING OR ERVICING THI EQUIPMENT.
ELECTROMAGNETIC SINGLE-DISC CLUTCHES
ELECTROMAGNETIC SINGLE-DISC CLUTCHES Type EBA & EBK EBA EBK Catalogue No. : V/C/14/01 Optional On Requet 01 02 03 04 05 06 07 Part No Decription 01 Rivet 02 Spring plate 03 Armature plate 04 Friction plate
Working pressure; connection PS1-E101
PDE2600PNUK Interface - PS1 Serie (IGH SPEED POPPET TYPE SOLENOID VALVES WITH INDIVIDUAL ELECTRICAL CONNECTIONS,IGHT WEIGHT PLASTIC BODIES WITH $). RAIL MANIFOLD )DEAL FOR cabinet intallation. (IGH SPEED
PVM/PVMI/PVMX VERTICAL MULTISTAGE CENTRIFUGAL PUMPS
PVM/PVMI/PVMX High hydraulic efficiency, Motor designed according to EN regulations IE3 MOTOR PVM, PVMI and PVMX are non selfpriming vertical multi-stage pumps, with Victaulic or flanged fittings with
KLINGER MONOLITH KHO Single-piece ball valve DN
KINGER MONOIT Single-piece ball valve 20 300 www.klinger.kfc.at MF 01 KINGER FUI CONTRO Toay for tomorrow A a ubiiary of the KINGER Group, KINGER Flui Control ha been eveloping, manufacturing an maintaining
Rotrex TM E-charger. Technical Datasheet. Prototype Status v1.5 (June 2015) updates and changes:
Rotrex TM E-charger Technical Dataheet Page 1 of 7 Prototype Statu v1. (June 201) update and change: NEW IP67/IP6 mobile inverter available in the 60A range (~40kW @ 60VDC), with bigger power range to
Contents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
ORDERING CODE - SERIES DT DT6 DOUBLE VANE PUMPS ORDERING CODE DATA SHEET. 72 tdz.com bezares.com DT6* I - CC - * - B -17/14-1- R-00 -B- 1-00
ORDERING CODE - ERIE DT DT6 DOUBLE VANE PUMP ORDERING CODE DATA HEET DT6* I - CC - * - B -17/14-1- R-00 -B- 1-00 pecial threads (ask for available threads) UNC: 00, 01, 10, 11 Metric: 0M, W0, 1M, W1 eal
Proportional Valves. Additionally, both of these valve types can be supplied with or without an integral amplifier built directly onto the valve.
VICKERS roportional Valve roportional Directional Valve Without Feed ack K(A)D/TGV-5, 3* Serie Typical Section KTGV-5 KAD/TGV-5KAD/TGV-5 A range of proportional directional and throttle valve with control
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW) 205 PERFORMANCE CURVE
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW)
This must be read in conjunction. See BC Bid for signed/sealed version
N Issued for Information only G G G G G G Issued for Information only GENERAL NOTE: 1. ALL IMENION ARE IN MILLIMETER UNLE OTHERIE NOTE. 2. ALL CONTRUCTION AN MATERIAL HALL CONFORM TO THE MMC (PLATINUM
- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE
Data sheet: Wilo-CronoLine-IL 125/210-5,5/4
Data sheet: Wilo-CronoLine-IL 15/1-5,5/ Pump curves -pole, 5 Hz H[m] 18 16 1 1 1 8 6 P [kw] 8 1 16 6 Qmin IL 15/-5,5/ IL 15/1-5,5/ IL 15/19-/ Wilo-CronoLine-IL 15/ - Wilo-CronoLine-IL 15/19 IL 15/-7,5/
Piping technology PE-Xc/Al/ PE-Xc/gunmetal/ PPSU
INT 4/ Catalogue /6 We reerve the right to effect change. Pexfit Pro Piping technology PE-Xc/Al/ PE-Xc/gunmetal/ PPSU Pre connector ytem for rinking water intallation in acc. with DIN 988 an D IN 0930
Data sheet: Wilo-CronoLine-IL 40/220-1,5/4
Data sheet: Wilo-CronoLine-IL 4/22-1,5/4 Pump curves 4-pole, 5 Hz H[m] 2 18 16 14 12 1 8 6 4 2 P 2 [kw] 5 1 15 2 25 1 2 3 4 5 6 7 8 1,2 Ø 22,8,4 5 1 15 2 25 η p[%] 6 4 2 Qmin 5 1 15 2 25 Dimension drawing
Compactness meets High Power Density
Compactness meets High Power Density Single Stage Geared Motors for Industrial Applications www.abm-drives.com gearboxes Modern and Efficient Drive Technology Single Stage Geared Motors Advantages High
HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS
Horizontal multistage centrifugal electric pumps in AISI 304. stainless steel. APPLICATIONS Industrial washing Pressure boosting units Industrial plants Distribution and treatment of water Heating and
Festoon Systems for I-Beams Program
Fetoon Sytem for I-Beam Program 0314 0320 0325 00 2 Content Cable Trolley for Flat Cable Program 0314 4 Fetoon Sytem for Flat Cable... 4 4 Wheel Platic Trolley... 4 3 Wheel Platic Trolley... 5 2 Wheel
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.
SUBMERSIBLE SEWAGE PUMPS WITH SEMI-VORTEX IMPELLER in cast iron
Submersible sewage pumps with semi-vortex impeller APPLICATIONS Ideal for waste waterapplications containing soft or fibrous solids Industrial waste water drainage Septic effluent Miscellaneous drainage
Pumps Motors ISO 9001 Company
SERIES DATA BOOKLET EndSuction Centrifugal Monoblock Pumps 6 Hz Pumps Motors ISO 91 Company Pumping Solution Contents Endsuction centrifugal monoblock pumps Product data Introduction Applications Features
MULTIGO. EBARA Pumps Europe S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 40 203 PERFORMANCE CURVES 80 204 - CONSTRUCTIONS SECTIONAL VIEW
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
WATERPRESS BOOSTER SETS WITH 24L HORIZONTAL EXPANSION TANK. Design features
WATERPRESS BOOSTER SETS WITH 24L HORIZONTAL EXPANSION TANK The WATERPRESS booster sets are made up of JET self-priming centrifugal pumps. They are supplied wired, tested and complete with 24l expansion
DOUBLE GIMBAL EXPANSION JOINTS
DOUE GIM EXPNSION JOINS Scan thi QR 64 NSI DIN EN +600 C Gimbal type expanion joint are deigned to permit angular rotation in any plane by the ue of two pair of hinge affixed to a common floating gimbal
- SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART MULTIGO PERFORMANCE CHART MULTIGO
CONTENTS Page - CONTENTS CONTENTS 100 - SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 40 202 PERFORMANCE CHART 80 203 - CONSTRUCTIONS CONSTRUCTIONS 300 CONSTRUCTIONS 301 CONSTRUCTIONS
3VF2 Circuit-Breakers
Circuit-Breaker - and -pole, up to Technical data or other circuit-breaker Specification IEC 0 97, EN 0 97 ax. rated current I n to Rated inulation voltage U i ain current path uxiliary circuit Rated impule
EG25*... EG30*... SERIES
EG*... EG*... ERIE OLENOID GA VALVE WITH 3/4 AND 1 CONNECTION AND OPERATING PREURE UP TO 500 mbar GENERAL DECRIPTION This series of solenoid valves are of normally closed type, suitable for civil and industrial
5" SUBMERSIBLE PUMPS. by Franklin Electric
5" SUBMERSIBLE PUMPS INDEX NAUTI VN 5" Submersible Pumps... 2 General Product Curves... 3 Material Table... 3 Technical Data and Performance Curves VN 3..................................................................................................
IN-LINE NORMALIZED ELECTROPUMPS in cast iron
INLINE NORMALIZED ELECTROPUMPS Twin inline centrifugal electropumps with cast iron hydraulic components, single impeller, compliant with DIN 24255. Equipped with normalised motors. APPLICATIONS Heating
Data sheet: Wilo-CronoLine-IL 100/250-5,5/4
Data sheet: Wilo-CronoLine-IL 1/25-5,5/ Pump curves -pole, 5 Hz H[m] 2 2 16 Qmin IL 1/25-5,5/ IL 1/26-7,5/ Wilo-CronoLine-IL 1/27 - Wilo-CronoLine-IL 1/25 IL 1/27-11/ IL 1/26-11/ Approved fluids (other
NM, NMS. Close Coupled Centrifugal Pumps with flanged connections. Construction. Operating conditions. Motor
The electropump NM,, NMS erie comply ith the Europen Regultion no. 7/. Mteril omponent NM, NMS Pump cing t iron ronze Lntern rcket NM ing cover for NMS GJL EN Gu Sn EN Lntern rcket NMS t iron GJL EN Impeller
CHE302 LECTURE III ACTUATOR AND CONTROL VALVE SELECTION. Professor Dae Ryook Yang INTRODUCTION TO ACTUATOR
CHE30 LECTURE III ACTUATOR AND CONTROL VALVE SELECTION Profeor Dae Ryook Yang Fall 001 Dept. of Chemical and Biological Engineering Korea Univerity CHE30 Proce Dynamic and Control Korea Univerity 3-1 INTRODUCTION
Tender Text. Company name: Created by: Phone: Date: 3/13/2017. Product No.: CRE 5-20 AN-FGJ-A-E-HQQE
Tender Text Product No.: 9685315 CRE 5-2 AN-FGJ-A-E-HQQE Product photo could vary from the actual product Liquid: Pumped liquid: Water Liquid temperature range: -2.. 12 C Liquid temperature during operation: