This must be read in conjunction. See BC Bid for signed/sealed version

Transcription

1 N Issued for Information only G G G G G G

2 Issued for Information only

3 GENERAL NOTE: 1. ALL IMENION ARE IN MILLIMETER UNLE OTHERIE NOTE. 2. ALL CONTRUCTION AN MATERIAL HALL CONFORM TO THE MMC (PLATINUM EITION, VOLUME II) TANAR AN TANAR PECIFICATION. 3. ALL ORK HALL COMPLY ITH EQUIPMENT/PROJECT PECIFICATION, LOCAL BY-LA, AN THE REQUIREMENT OF AUTHORITY HAVING JURIICTION. 4. ALL PIPING/FITTING AN APPURTENANCE EXTERNAL TO PRV VAULT ARE A HON ON EIGN RAING. 5. RETORE ALL ITURBE URFACE TO MATCH EXITING OR BETTER, OR A HON ON EIGN RAING. 6. LOCATE EXITING UNERGROUN UTILITIE PRIOR TO EXCAVATION. 7. NO ORK HALL INTERFERE, AN ILL BE COORINATE, ITH OTHER CONTRUCTION ACTIVITIE AT THE ITE OR IN THE AREA BY OTHER. 8. ALL ORK INCLUING ATER UPPLY INTERRUPTION (HUTON) HALL BE COORINATE AN CHEULE ITH THE CONTRUCTION MANAGER OR ITRICT OF ELKFOR. 9. TRAFFIC CONTROL ON PORTION OR ROA AFFECTE BY ORK HALL BE COORINATE ITH THE CONTRUCTION MANAGER. 10. NOTIFY CONULTANT OF CHANGE REQUIRE PRIOR TO MAKING ANY CHANGE. 11. UNUE MATERIAL AN ABANONE PIPE, FITTING, CONCRETE, EXCE NATIVE FILL, AN/OR EQUIPMENT HALL BE IPOE OF AT THE CONTRACTOR' EXPENE. 12. THE CONTRACTOR HALL PROVIE AN INTALL ALL NECEARY MATERIAL, AN PROVIE TOOL AN EQUIPMENT TO ENURE A COMPLETE INTALLATION AN CREATE A FULLY FUNCTIONAL YTEM. Issued 13. THE CONTRACTOR HALL CONFIRM ERVICE LOCATION AN COORINATE INTALLATION ITH BC HYRO. for Information only 14. ORK HALL CONFORM TO ALL APPLICABLE REGULATION AN ORKAFEBC. 15. ON-ITE OCUMENT HALL BE TORE IN A ECURE LOCATION AN HALL NOT BE LEFT IN VEHICLE OVERNIGHT. 16. CONTRACTOR TO PROVIE THE FOLLOING: HOP RAING AN PECIFICATION OF ALL RELATE EQUIPMENT AN MATERIAL FOR APPROVAL PRIOR TO FABRICATION/INTALLATION. OPERATING AN MAINTENANCE MANUAL FOR ALL RELATE EQUIPMENT (3 COPIE). MINIMUM ONE AY TART-UP AN TETING BY THE PREURE REUCING VALVE UPPLIER FOR COMMIIONING OF THE PRV CHAMBER TO BE COORINATE ITH THE PRV CHAMBER UPPLIER. 17. THE CONTRACTOR HALL PROVIE A COMPLETE AEMBLE PRV MANIFOL/VAULT AEMBLY A PER THE ATTACHE RAING and This 18. THE CONTRACTOR HALL ENURE THAT THE PRV MANIFOL/VAULT AEMBLY must ILL COMPLY ITH be read in conjunction UPPLEMENTARY MECHANICAL PECIFICATION ON HEET & EIGN RAING IN AITION TO THE EIGN HON ON HEET & ELECTRICAL RAING/PECIFICATION, THE CONTRACTOR ILL ORK ITH THE ENGINEER IN ORER TO ETERMINE THE APPROPRIATE ITE & LOCATION OF ELECTRICAL PENETRATION. 19. THE CONTRACTOR HALL BE PREENT URING INTALLATION OF THE PRV MAINFOL/VAULT AEMBLY ONITE TO ORK ITH THE ENGINEER & EQUIPMENT UPPLIER URING TART UP. 20. PROVIE A ROBAR RETRAINE COUPLING AT TIE-IN TO THE EXITING ATER MAIN EXTERNAL TO THE PRV VAULT, A HON ON RAING No ROBAR RETRAINE COUPLING PECIFICATION: 200 MM (8 ) X 150 MM (6 ) ROBAR 1506R REUCING COUPLING Center leeve: Cast uctile Iron. Min. orking Pressure: 250 psi End Rings: Cast uctile Iron. Gaskets: BR (Buna ) Rubber. Fasteners: 5/8 NC T304 tainless teel. Nuts coated with anti-galling compound. Torque is ft. lbs. Coating: Corrosion Protective Epoxy coating. upplier: Robar Industries, Coast ater ystems, or approved alternative Refer to rawing No for location. UPPLEMENTARY MECHANICAL PECIFICATION: ITEM NUMBER PROVIE HEREINAFTER MATCH THE MATERIAL LIT TABLE ON RAING No ITEM MM (6 ) MUELLER A NR R GATE VALVE - FLG x PUH ON AA C PI, NF 61 Certified Epoxy coating to AA C550 NR - Non-Rising tem, cast copper alloy with integral collars per AA C509 R - Resilient edge uctile iron body, bonnet, and O-ring plate edge is fully encapsulated with rubber per ATM nuts and bolts Valve to be c/w rod, 150 mm PVC pipe cut to fit, and valve box, operating nut shall be 32 mm square Rod and PVC pipe to be extended to the surface. The operating nut and handwheel shall be marked indicating the direction to open with the word OPEN and an arrow. upplier: Mueller, Clow, Coast ater ystems, or approved alternative ITEM 2 - CLA-VAL 150 MM (6") BFVYKX PREURE REUCING VALVE /ONTREAM URGE FEATURE AN X101 POITION INICATOR uctile Iron Body, (Globe) Pattern T Trim & Fasteners X101 Position indicator 1" tainless teel Pilot Y trainer Remote Pilot ensing CV Opening peed Control Check Feature tainless teel Tubing, Fittings & Ball Valves CR Pilot pring Range PI, et at 38 PI (settable) CRL Pilot pring Range PI, et at 48 PI (settable) upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative =Check feature F=Remote pilot sensing =Opening speed control V= X101 Position indicator KX=tainless steel tubing, fittings & ball valves (in lieu of copper & brass) ITEM MM (6 ) CLA-VAL X43H TRAINER 150 mm (6") Model X43H H-tyle trainer uctile Iron Body 316 T trainer, 10 Mesh Buna-N Cover eal Fusion Epoxy Lined and Coated, 1.25" rain/blow-off Plug upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative ITEM 4 - MAGNETIC FLO METER ROEMOUNT 8750 / GROUNING RING Model# 8750E1A1FPA060CA1Z6M4G5 8750: Magnetic Flowmeter/Transmitter + : Revision "" E: Revision 3 Electronics : Remote all Mount 1: Ac Power upply (90 to 250VAC, 50 60Hz) A: 4-20 ma igital Electronics calable Pulse 1: 1/2-14 NPT F: Flanged P: Polyurethane : 316L tainless teel A: 2Measurement Electrodes - tandard 060: 6.0"(150mm) C: lip-on, Raised-Face, Carbon teel A1: AME B16.5, Class 150 M4: Local Operator Interface Z6: CA, Class I iv 2 for Non-Flammable Fluids; IP G5: Ground Ring 316 T Quantity 1 : rinking ater Certificate, NF upplier: Rosemount, Coast ater ystems, or approved alternative ITEM MM (6 ) MUELLER A NR R GATE VALVE - FLG x FLG, OR 150 MM (6 ) CLO F6102 NR R GATE VALVE - FLG x FLG AA C PI, NF 61 Certified Epoxy coating to AA C550 NR - Non-Rising tem, cast copper alloy with integral collars per AA C509 R - Resilient edge uctile iron body, bonnet, and O-ring plate edge is fully encapsulated with rubber per ATM nuts and bolts The operating handwheel shall be marked indicating the direction to open with the word OPEN and an arrow. upplier: Mueller, Clow, Coast ater ystems, or approved alternative ITEM 9 - CLA-VAL 50 MM (2 ) BVYKX PREURE REUCING VALVE /ONTREAM URGE FEATURE AN X101 POITION INICATOR uctile Iron Body, (Globe) Pattern T Trim & Fasteners X101 Valve Position Indicator Pilot Ball Valves 1" tainless teel Pilot Y trainer tainless teel Tubing, Fittings & Ball Valves CR Pilot pring Range PI, et at 43 PI (settable) upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative =Opening speed control V=X101 Valve position indicator KX=tainless steel tubing, fittings & ball valves (in lieu of copper & brass) ITEM MM (2 ) CLA-VAL X43H TRAINER 50 mm (2 ) Model X43H H-tyle trainer uctile Iron Body 316 T trainer, 10 Mesh Buna-N Cover eal Fusion Epoxy Lined and Coated, 1.25" rain/blow-off Plug upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative ITEM MM (2 ) MA G2E BALL VALVE Full port, NPT ends to ANI B Two-piece body Blowout-proof stem Adjustable packing nut Locking lever handle Floating ball Complies with NACE MR-0103 & upplier Requirements of NACE MR-0175/IO PI upplier: MA, Coast ater ystems, or approved alternative ITEM MM (2 ) VICTAULIC 89 ZERO-FLEX RIGI COUPLING Housing: uctile iron conforming to ATM A 536, Grade Max. orking Pressure: 400 psi Gasket: Grade E EPM - EPM (Green stripe color code). Temperature range -34ºC to +110ºC. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ATM A 449 and physical requirements of ATM A 183. upplier: Victaulic, Coast ater ystems, or approved alternative ITEM MM (2 ) AJUTIBLE GALVANIZE TEEL PIPE UPPORT AN ALL PIPE HANGER To Coast ater ystems, or approved alternative specifications Pipe tand: Hot dip galvanized; 1.5 galvanized ch 40 steel pipe Base: 152 mm (6 ) x 152 mm (6 ) x 10 mm (3/8 ) steel flat bar c/w 2.25 x OM tube; 4 x ½ holes Rod: 1 x 6 grade 2 ready rod with adjustable height to suit upplier: Coast ater ystems, or approved alternative ITEM MM (2 ) RAIN C/.. BALL VALVE To Coast ater ystems, or approved alternative specifications upplier: Coast ater ystems, or approved alternative ITEM MM (1 ) VALMATIC 15A AIR RELEAE VALVE C/ IOLATION BALL VALVE Cast iron body with 304 float Inlet 1 NPT; Outlet ½ NPT; Orifice 1/ PI to ATM A126 Class B upplier: Valmatic, Coast ater ystems, or approved alternative ITEM MM (1 ) VALMATIC 201C AIR COMBINATION RELEAE VALVE C/ IOLATION BALL VALVE Cast iron body with 304 float Inlet 1 NPT; Outlet 1 NPT; Orifice 5/ PI to ATM A126 Class B upplier: Valmatic, Coast ater ystems, or approved alternative ITEM MM (3/4 ) HOE BIB AEMBLY upplier: Coast ater ystems, or approved alternative ITEM 18 - PREURE GAUGE AEMBLY C/ IOLATION BALL VALVE, VENT VALVE, AMPLING PORT, AN PROVIION FOR PREURE TRANMITTER Pressure gauges to be oil filled, psi, dual gauge upplier: Coast ater ystems, or approved alternative ITEM 20 - ARMTEC #3152 PRECAT CONCRETE CHAMBER C/ HITE INTERIOR, BLACK EXTERIOR AN CORE HOLE 3310 mm (L) x 1810 mm () x 1225 mm (H), refer to rawing No Manufactured to CA A23.4 upplier: Armtec, Coast ater ystems, or approved alternative ITEM 21 - OBNEY C23 CAT IRON MANHOLE FRAME AN COVER Load: ynamic H20, suitable for installation in roadways upplier: Armtec, Coast ater ystems, or approved alternative ITEM 22 - ALUMINUM LAER C/ AFETY POT To Coast ater ystems specifications, or approved alternative, as shown on rawing No upplier: Coast ater ystems, or approved alternative ITEM 23 - PRAY FOAM INULATION Thickness: min. 50 mm (2 ) Quantity: refer to rawing No upplier: Coast ater ystems, or approved alternative ITEM 24 - ZOELLER MIGHTY-MATE UMP PUMP, MOEL 53/57 ubmersible pump Cast iron construction Non-clogging vortex impeller Corrosion resistant powder coated epoxy finish olid buoyant polypropylene float Passes ½ solids 1 ½ NPT discharge 1550 RPM, 115 V, 1 phase, 9.7 Amps, 60 Hz Motor oil-filled, hermetically sealed, automatic reset thermal overload protected hipped loose c/w PVC piping Installation by the contractor upplier: Zoeller, Coast ater ystems, or approved alternative ITEM 25 - CLA-VAL 150 MM (6 ) BCVYKX OLENOI CONTROL VALVE ITH X101 POITION INICATOR uctile Iron Body, (Globe) Pattern T Trim & Fasteners X101 Valve Position Indicator Pilot Ball Valves 1" tainless teel Pilot Y trainer tainless teel Tubing, Fittings & Ball Valves CR Pilot pring Range PI, et at 33 PI (settable) upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative C=CNA closing speed control V=X101 Valve position indicator KX=tainless steel tubing, fittings & ball valves (in lieu of copper & brass) ITEM MM (6 ) VICTAULIC 89 ZERO-FLEX RIGI COUPLING Housing: uctile iron conforming to ATM A 536, Grade Max. orking Pressure: 400 psi Gasket: Grade E EPM - EPM (Green stripe color code). Temperature range -34ºC to +110ºC. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ATM A 449 and physical requirements of ATM A 183. Quantity: 5 upplier: Victaulic, Coast ater ystems, or approved alternative ITEM 19 - ARMTEC #4212 PRECAT CONCRETE CHAMBER C/ HITE INTERIOR, BLACK EXTERIOR AN CORE HOLE 4310 mm (L) x 2480 mm () x 2710 mm (H), refer to rawing No Manufactured to CA A23.4 upplier: Armtec, Coast ater ystems, or approved alternative ITEM MM (6 ) LINK EAL AEMBLY To Coast ater ystems (C) specifications, or approved alternative upplier: Coast ater ystems, or approved alternative ITEM MM (6 ) AJUTIBLE GALVANIZE TEEL PIPE UPPORT C galvanized steel pipe supports Pipe tand: Hot dip galvanized; 1.5 galvanized ch 40 steel pipe Base: 152 mm (6 ) x 152 mm (6 ) x 10 mm (3/8 ) steel flat bar c/w 2.25 x OM tube; 4 x ½ holes Rod: 1 x 6 grade 2 ready rod adjustable up to 610 mm Quantity: 6 upplier: Coast ater ystems, or approved alternative

4 N Issued for Information only

5 Issued for Information only

6 GENERAL NOTE: 1. ALL IMENION ARE IN MILLIMETER UNLE OTHERIE NOTE. 2. ALL CONTRUCTION AN MATERIAL HALL CONFORM TO THE MMC (PLATINUM EITION, VOLUME II) TANAR AN TANAR PECIFICATION. 3. ALL ORK HALL COMPLY ITH EQUIPMENT/PROJECT PECIFICATION, LOCAL BY-LA, AN THE REQUIREMENT OF AUTHORITY HAVING JURIICTION. 4. ALL PIPING/FITTING AN APPURTENANCE EXTERNAL TO PRV VAULT ARE A HON ON EIGN RAING. 5. RETORE ALL ITURBE URFACE TO MATCH EXITING OR BETTER, OR A HON ON EIGN RAING. 6. LOCATE EXITING UNERGROUN UTILITIE PRIOR TO EXCAVATION. 7. NO ORK HALL INTERFERE, AN ILL BE COORINATE, ITH OTHER CONTRUCTION ACTIVITIE AT THE ITE OR IN THE AREA BY OTHER. 8. ALL ORK INCLUING ATER UPPLY INTERRUPTION (HUTON) HALL BE COORINATE AN CHEULE ITH THE CONTRUCTION MANAGER OR ITRICT OF ELKFOR. 9. TRAFFIC CONTROL ON PORTION OR ROA AFFECTE BY ORK HALL BE COORINATE ITH THE CONTRUCTION MANAGER. 10. NOTIFY CONULTANT OF CHANGE REQUIRE PRIOR TO MAKING ANY CHANGE. 11. UNUE MATERIAL AN ABANONE PIPE, FITTING, CONCRETE, EXCE NATIVE FILL, AN/OR EQUIPMENT HALL BE IPOE OF AT THE CONTRACTOR' EXPENE. 12. THE CONTRACTOR HALL PROVIE AN INTALL ALL NECEARY MATERIAL, AN PROVIE TOOL AN EQUIPMENT TO ENURE A COMPLETE INTALLATION AN CREATE A FULLY FUNCTIONAL YTEM. Issued 13. THE CONTRACTOR HALL CONFIRM ERVICE LOCATION AN COORINATE INTALLATION ITH BC HYRO. for Information only 14. ORK HALL CONFORM TO ALL APPLICABLE REGULATION AN ORKAFEBC. 15. ON-ITE OCUMENT HALL BE TORE IN A ECURE LOCATION AN HALL NOT BE LEFT IN VEHICLE OVERNIGHT. 16. CONTRACTOR TO PROVIE THE FOLLOING: HOP RAING AN PECIFICATION OF ALL RELATE EQUIPMENT AN MATERIAL FOR APPROVAL PRIOR TO FABRICATION/INTALLATION. OPERATING AN MAINTENANCE MANUAL FOR ALL RELATE EQUIPMENT (3 COPIE). MINIMUM ONE AY TART-UP AN TETING BY THE PREURE REUCING VALVE UPPLIER FOR COMMIIONING OF THE PRV CHAMBER TO BE COORINATE ITH THE PRV CHAMBER UPPLIER. 17. THE CONTRACTOR HALL PROVIE A COMPLETE AEMBLE PRV MANIFOL/VAULT AEMBLY A PER THE ATTACHE RAING and THE CONTRACTOR HALL ENURE THAT THE PRV MANIFOL/VAULT AEMBLY ILL COMPLY ITH UPPLEMENTARY MECHANICAL PECIFICATION ON HEET & EIGN RAING IN AITION TO THE EIGN HON ON HEET & ELECTRICAL RAING/PECIFICATION, THE CONTRACTOR ILL ORK ITH THE ENGINEER IN ORER TO ETERMINE THE APPROPRIATE ITE & LOCATION OF ELECTRICAL PENETRATION. 19. THE CONTRACTOR HALL BE PREENT URING INTALLATION OF THE PRV MAINFOL/VAULT AEMBLY ONITE TO ORK ITH THE ENGINEER & EQUIPMENT UPPLIER URING TART UP. 20. PROVIE A ROBAR RETRAINE COUPLING AT TIE-IN TO THE EXITING ATER MAIN EXTERNAL TO THE PRV VAULT, A HON ON RAING No with 150 MM (6 ) ROBAR 1506 TRANITION COUPLING the signed/sealed set ROBAR RETRAINE COUPLING PECIFICATION: Center leeve: Cast uctile Iron. Min. orking Pressure: 250 psi End Rings: Cast uctile Iron. Gaskets: BR (Buna ) Rubber. Fasteners: 5/8 NC T304 tainless teel. Nuts coated with anti-galling compound. Torque is ft. lbs. Coating: Corrosion Protective Epoxy coating. upplier: Robar Industries, Coast ater ystems, or approved alternative Refer to rawing No for location. UPPLEMENTARY MECHANICAL PECIFICATION: ITEM NUMBER PROVIE HEREINAFTER MATCH THE MATERIAL LIT TABLE ON RAING No ITEM MM (6 ) MUELLER A NR R GATE VALVE - FLG x PUH ON AA C PI, NF 61 Certified Epoxy coating to AA C550 NR - Non-Rising tem, cast copper alloy with integral collars per AA C509 R - Resilient edge uctile iron body, bonnet, and O-ring plate edge is fully encapsulated with rubber per ATM nuts and bolts Valve to be c/w rod, 150 mm PVC pipe cut to fit, and valve box, operating nut shall be 32 mm square Rod and PVC pipe to be extended to the surface. The operating nut and handwheel shall be marked indicating the direction to open with the word OPEN and an arrow. upplier: Mueller, Clow, Coast ater ystems, or approved alternative ITEM 2 - CLA-VAL 150 MM (6") BFVYKX PREURE REUCING VALVE /ONTREAM URGE FEATURE AN X101 POITION INICATOR uctile Iron Body, (Globe) Pattern T Trim & Fasteners X101 Position indicator 1" tainless teel Pilot Y trainer Remote Pilot ensing CV Opening peed Control Check Feature tainless teel Tubing, Fittings & Ball Valves CR Pilot pring Range PI, et at 30 PI (settable) CRL Pilot pring Range PI, et at 40 PI (settable) upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative =Check feature F=Remote pilot sensing =Opening speed control V= X101 Position indicator KX=tainless steel tubing, fittings & ball valves (in lieu of copper & brass) ITEM MM (6 ) CLA-VAL X43H TRAINER 150 mm (6") Model X43H H-tyle trainer uctile Iron Body 316 T trainer, 10 Mesh Buna-N Cover eal Fusion Epoxy Lined and Coated, 1.25" rain/blow-off Plug upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative ITEM 4 - MAGNETIC FLO METER ROEMOUNT 8750 / GROUNING RING Model# 8750E1A1FPA060CA1Z6M4G5 8750: Magnetic Flowmeter/Transmitter + : Revision "" E: Revision 3 Electronics : Remote all Mount 1: Ac Power upply (90 to 250VAC, 50 60Hz) A: 4-20 ma igital Electronics calable Pulse 1: 1/2-14 NPT F: Flanged P: Polyurethane : 316L tainless teel A: 2Measurement Electrodes - tandard 060: 6.0"(150mm) C: lip-on, Raised-Face, Carbon teel A1: AME B16.5, Class 150 Z6: CA, Class I iv 2 for Non-Flammable Fluids; IP M4: Local Operator Interface G5: Ground Ring 316 T Quantity 1 : rinking ater Certificate, NF upplier: Rosemount, Coast ater ystems, or approved alternative ITEM MM (6 ) MUELLER A NR R GATE VALVE - FLG x FLG, OR 150 MM (6 ) CLO F6102 NR R GATE VALVE - FLG x FLG AA C PI, NF 61 Certified Epoxy coating to AA C550 NR - Non-Rising tem, cast copper alloy with integral collars per AA C509 R - Resilient edge uctile iron body, bonnet, and O-ring plate edge is fully encapsulated with rubber per ATM nuts and bolts The operating handwheel shall be marked indicating the direction to open with the word OPEN and an arrow. upplier: Mueller, Clow, Coast ater ystems, or approved alternative ITEM 9 - CLA-VAL 50 MM (2 ) BVYKX PREURE REUCING VALVE /ONTREAM URGE FEATURE AN X101 POITION INICATOR uctile Iron Body, (Globe) Pattern T Trim & Fasteners X101 Valve Position Indicator Pilot Ball Valves 1" tainless teel Pilot Y trainer tainless teel Tubing, Fittings & Ball Valves CR Pilot pring Range PI, et at 35 PI (settable) upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative =Opening speed control V=X101 Valve position indicator KX=tainless steel tubing, fittings & ball valves (in lieu of copper & brass) ITEM MM (2 ) CLA-VAL X43H TRAINER 50 mm (2 ) Model X43H H-tyle trainer uctile Iron Body 316 T trainer, 10 Mesh Buna-N Cover eal Fusion Epoxy Lined and Coated, 1.25" rain/blow-off Plug upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative ITEM MM (2 ) MA G2E BALL VALVE Full port, NPT ends to ANI B Two-piece body Blowout-proof stem Adjustable packing nut Locking lever handle Floating ball Complies with NACE MR-0103 & upplier Requirements of NACE MR-0175/IO PI upplier: MA, Coast ater ystems, or approved alternative ITEM MM (2 ) VICTAULIC 89 ZERO-FLEX RIGI COUPLING Housing: uctile iron conforming to ATM A 536, Grade Max. orking Pressure: 400 psi Gasket: Grade E EPM - EPM (Green stripe color code). Temperature range -34ºC to +110ºC. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ATM A 449 and physical requirements of ATM A 183. upplier: Victaulic, Coast ater ystems, or approved alternative ITEM MM (2 ) AJUTIBLE GALVANIZE TEEL PIPE UPPORT AN ALL PIPE HANGER To Coast ater ystems, or approved alternative specifications Pipe tand: Hot dip galvanized; 1.5 galvanized ch 40 steel pipe Base: 152 mm (6 ) x 152 mm (6 ) x 10 mm (3/8 ) steel flat bar c/w 2.25 x OM tube; 4 x ½ holes Rod: 1 x 6 grade 2 ready rod with adjustable height to suit upplier: Coast ater ystems, or approved alternative ITEM MM (2 ) RAIN C/.. BALL VALVE To Coast ater ystems, or approved alternative specifications upplier: Coast ater ystems, or approved alternative ITEM MM (1 ) VALMATIC 15A AIR RELEAE VALVE C/ IOLATION BALL VALVE Cast iron body with 304 float Inlet 1 NPT; Outlet ½ NPT; Orifice 1/ PI to ATM A126 Class B upplier: Valmatic, Coast ater ystems, or approved alternative ITEM MM (1 ) VALMATIC 201C AIR COMBINATION RELEAE VALVE C/ IOLATION BALL VALVE Cast iron body with 304 float Inlet 1 NPT; Outlet 1 NPT; Orifice 5/ PI to ATM A126 Class B upplier: Valmatic, Coast ater ystems, or approved alternative ITEM MM (3/4 ) HOE BIB AEMBLY upplier: Coast ater ystems, or approved alternative ITEM 18 - PREURE GAUGE AEMBLY C/ IOLATION BALL VALVE, VENT VALVE, AMPLING PORT, AN PROVIION FOR PREURE TRANMITTER Pressure gauges to be oil filled, psi, dual gauge upplier: Coast ater ystems, or approved alternative ITEM 21 - OBNEY C23 CAT IRON MANHOLE FRAME AN COVER Load: ynamic H20, suitable for installation in roadways upplier: Armtec, Coast ater ystems, or approved alternative ITEM 22 - ALUMINUM LAER C/ AFETY POT To Coast ater ystems specifications, or approved alternative, as shown on rawing No upplier: Coast ater ystems, or approved alternative ITEM 23 - PRAY FOAM INULATION Thickness: min. 50 mm (2 ) Quantity: refer to rawing No upplier: Coast ater ystems, or approved alternative ITEM 24 - ZOELLER MIGHTY-MATE UMP PUMP, MOEL 53/57 ubmersible pump Cast iron construction Non-clogging vortex impeller Corrosion resistant powder coated epoxy finish olid buoyant polypropylene float Passes ½ solids 1 ½ NPT discharge 1550 RPM, 115 V, 1 phase, 9.7 Amps, 60 Hz Motor oil-filled, hermetically sealed, automatic reset thermal overload protected hipped loose c/w PVC piping Installation by the contractor upplier: Zoeller, Coast ater ystems, or approved alternative ITEM MM (6 ) VICTAULIC 89 ZERO-FLEX RIGI COUPLING Housing: uctile iron conforming to ATM A 536, Grade Max. orking Pressure: 400 psi Gasket: Grade E EPM - EPM (Green stripe color code). Temperature range -34ºC to +110ºC. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ATM A 449 and physical requirements of ATM A 183. upplier: Victaulic, Coast ater ystems, or approved alternative ITEM MM (6 ) LINK EAL AEMBLY To Coast ater ystems (C) specifications, or approved alternative upplier: Coast ater ystems, or approved alternative ITEM MM (6 ) AJUTIBLE GALVANIZE TEEL PIPE UPPORT C galvanized steel pipe supports Pipe tand: Hot dip galvanized; 1.5 galvanized ch 40 steel pipe Base: 152 mm (6 ) x 152 mm (6 ) x 10 mm (3/8 ) steel flat bar c/w 2.25 x OM tube; 4 x ½ holes Rod: 1 x 6 grade 2 ready rod adjustable up to 610 mm Quantity: 4 upplier: Coast ater ystems, or approved alternative ITEM 19 - ARMTEC #4212 PRECAT CONCRETE CHAMBER C/ HITE INTERIOR, BLACK EXTERIOR AN CORE HOLE 4310 mm (L) x 2480 mm () x 2710 mm (H), refer to rawing No Manufactured to CA A23.4 upplier: Armtec, Coast ater ystems, or approved alternative ITEM 20 - ARMTEC #3152 PRECAT CONCRETE CHAMBER C/ HITE INTERIOR, BLACK EXTERIOR AN CORE HOLE 3310 mm (L) x 1810 mm () x 1225 mm (H), refer to rawing No Manufactured to CA A23.4 upplier: Armtec, Coast ater ystems, or approved alternative

7 Issued for Information only N

8 Issued for Information only

9 GENERAL NOTE: 1. ALL IMENION ARE IN MILLIMETER UNLE OTHERIE NOTE. 2. ALL CONTRUCTION AN MATERIAL HALL CONFORM TO THE MMC (PLATINUM EITION, VOLUME II) TANAR AN TANAR PECIFICATION. 3. ALL ORK HALL COMPLY ITH EQUIPMENT/PROJECT PECIFICATION, LOCAL BY-LA, AN THE REQUIREMENT OF AUTHORITY HAVING JURIICTION. 4. ALL PIPING/FITTING AN APPURTENANCE EXTERNAL TO PRV VAULT ARE A HON ON EIGN RAING. 5. RETORE ALL ITURBE URFACE TO MATCH EXITING OR BETTER, OR A HON ON EIGN RAING. 6. LOCATE EXITING UNERGROUN UTILITIE PRIOR TO EXCAVATION. 7. NO ORK HALL INTERFERE, AN ILL BE COORINATE, ITH OTHER CONTRUCTION ACTIVITIE AT THE ITE OR IN THE AREA BY OTHER. 8. ALL ORK INCLUING ATER UPPLY INTERRUPTION (HUTON) HALL BE COORINATE AN CHEULE ITH THE CONTRUCTION MANAGER OR ITRICT OF ELKFOR. 9. TRAFFIC CONTROL ON PORTION OR ROA AFFECTE BY ORK HALL BE COORINATE ITH THE CONTRUCTION MANAGER. 10. NOTIFY CONULTANT OF CHANGE REQUIRE PRIOR TO MAKING ANY CHANGE. 11. UNUE MATERIAL AN ABANONE PIPE, FITTING, CONCRETE, EXCE NATIVE FILL, AN/OR EQUIPMENT HALL BE IPOE OF AT THE CONTRACTOR' EXPENE. 12. THE CONTRACTOR HALL PROVIE AN INTALL ALL NECEARY MATERIAL, AN PROVIE TOOL AN EQUIPMENT TO ENURE A COMPLETE INTALLATION AN CREATE A FULLY FUNCTIONAL YTEM. Issued 13. THE CONTRACTOR HALL CONFIRM ERVICE LOCATION AN COORINATE INTALLATION ITH BC HYRO. for Information only 14. ORK HALL CONFORM TO ALL APPLICABLE REGULATION AN ORKAFEBC. 15. ON-ITE OCUMENT HALL BE TORE IN A ECURE LOCATION AN HALL NOT BE LEFT IN VEHICLE OVERNIGHT. 16. CONTRACTOR TO PROVIE THE FOLLOING: HOP RAING AN PECIFICATION OF ALL RELATE EQUIPMENT AN MATERIAL FOR APPROVAL PRIOR TO FABRICATION/INTALLATION. OPERATING AN MAINTENANCE MANUAL FOR ALL RELATE EQUIPMENT (3 COPIE). MINIMUM ONE AY TART-UP AN TETING BY THE PREURE REUCING VALVE UPPLIER FOR COMMIIONING OF THE PRV CHAMBER TO BE COORINATE ITH THE PRV CHAMBER UPPLIER. 17. THE CONTRACTOR HALL PROVIE A COMPLETE AEMBLE PRV MANIFOL/VAULT AEMBLY A PER THE ATTACHE RAING and THE CONTRACTOR HALL ENURE THAT THE PRV MANIFOL/VAULT AEMBLY ILL COMPLY ITH UPPLEMENTARY MECHANICAL PECIFICATION ON HEET & EIGN RAING IN AITION TO THE EIGN HON ON HEET & ELECTRICAL RAING/PECIFICATION, THE CONTRACTOR ILL ORK ITH THE ENGINEER IN ORER TO ETERMINE THE APPROPRIATE ITE & LOCATION OF ELECTRICAL PENETRATION. 19. THE CONTRACTOR HALL BE PREENT URING INTALLATION OF THE PRV MAINFOL/VAULT AEMBLY ONITE TO ORK ITH THE ENGINEER & EQUIPMENT UPPLIER URING TART UP. 20. PROVIE A ROBAR RETRAINE COUPLING AT TIE-IN TO THE EXITING ATER MAIN EXTERNAL TO THE PRV VAULT, A HON ON RAING No Center leeve: Cast uctile Iron. ROBAR RETRAINE COUPLING PECIFICATION: 150 MM (8 ) X 150 MM (6 ) ROBAR 1506 TRANITION COUPLING Min. orking Pressure: 250 psi End Rings: Cast uctile Iron. Gaskets: BR (Buna ) Rubber. Fasteners: 5/8 NC T304 tainless teel. Nuts coated with anti-galling compound. Torque is ft. lbs. Coating: Corrosion Protective Epoxy coating. upplier: Robar Industries, Coast ater ystems, or approved alternative Refer to rawing No for location. UPPLEMENTARY MECHANICAL PECIFICATION: ITEM NUMBER PROVIE HEREINAFTER MATCH THE MATERIAL LIT TABLE ON RAING No ITEM MM (6 ) MUELLER A NR R GATE VALVE - FLG x PUH ON AA C PI, NF 61 Certified Epoxy coating to AA C550 NR - Non-Rising tem, cast copper alloy with integral collars per AA C509 R - Resilient edge uctile iron body, bonnet, and O-ring plate edge is fully encapsulated with rubber per ATM nuts and bolts Valve to be c/w rod, 150 mm PVC pipe cut to fit, and valve box, operating nut shall be 32 mm square Rod and PVC pipe to be extended to the surface. The operating nut and handwheel shall be marked indicating the direction to open with the word OPEN and an arrow. upplier: Mueller, Clow, Coast ater ystems, or approved alternative ITEM 2 - CLA-VAL 150 MM (6") BFVYKX PREURE REUCING VALVE /ONTREAM URGE FEATURE AN X101 POITION INICATOR uctile Iron Body, (Globe) Pattern T Trim & Fasteners X101 Position indicator 1" tainless teel Pilot Y trainer Remote Pilot ensing CV Opening peed Control Check Feature tainless teel Tubing, Fittings & Ball Valves CR Pilot pring Range PI, et at 45 PI (settable) CRL Pilot pring Range PI, et at 55 PI (settable) upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative =Check feature F=Remote pilot sensing =Opening speed control V= X101 Position indicator KX=tainless steel tubing, fittings & ball valves (in lieu of copper & brass) ITEM MM (6 ) CLA-VAL X43H TRAINER 150 mm (6") Model X43H H-tyle trainer uctile Iron Body 316 T trainer, 10 Mesh Buna-N Cover eal Fusion Epoxy Lined and Coated, 1.25" rain/blow-off Plug upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative ITEM 4 - MAGNETIC FLO METER ROEMOUNT 8750 / GROUNING RING Model# 8750E1A1FPA060CA1Z6M4G5 8750: Magnetic Flowmeter/Transmitter + : Revision "" E: Revision 3 Electronics : Remote all Mount 1: Ac Power upply (90 to 250VAC, 50 60Hz) A: 4-20 ma igital Electronics calable Pulse 1: 1/2-14 NPT F: Flanged P: Polyurethane : 316L tainless teel A: 2Measurement Electrodes - tandard 060: 6.0"(150mm) C: lip-on, Raised-Face, Carbon teel A1: AME B16.5, Class 150 Z6: CA, Class I iv 2 for Non-Flammable Fluids; IP M4: Local Operator Interface G5: Ground Ring 316 T Quantity 1 : rinking ater Certificate, NF upplier: Rosemount, Coast ater ystems, or approved alternative ITEM MM (6 ) MUELLER A NR R GATE VALVE - FLG x FLG, OR 150 MM (6 ) CLO F6102 NR R GATE VALVE - FLG x FLG AA C PI, NF 61 Certified Epoxy coating to AA C550 NR - Non-Rising tem, cast copper alloy with integral collars per AA C509 R - Resilient edge uctile iron body, bonnet, and O-ring plate edge is fully encapsulated with rubber per ATM nuts and bolts The operating handwheel shall be marked indicating the direction to open with the word OPEN and an arrow. upplier: Mueller, Clow, Coast ater ystems, or approved alternative ITEM 9 - CLA-VAL 50 MM (2 ) BVYKX PREURE REUCING VALVE /ONTREAM URGE FEATURE AN X101 POITION INICATOR uctile Iron Body, (Globe) Pattern T Trim & Fasteners X101 Valve Position Indicator Pilot Ball Valves 1" tainless teel Pilot Y trainer tainless teel Tubing, Fittings & Ball Valves CR Pilot pring Range PI, et at 50 PI (settable) upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative =Opening speed control V=X101 Valve position indicator KX=tainless steel tubing, fittings & ball valves (in lieu of copper & brass) ITEM MM (2 ) CLA-VAL X43H TRAINER 50 mm (2 ) Model X43H H-tyle trainer uctile Iron Body 316 T trainer, 10 Mesh Buna-N Cover eal Fusion Epoxy Lined and Coated, 1.25" rain/blow-off Plug upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative ITEM MM (2 ) MA G2E BALL VALVE Full port, NPT ends to ANI B Two-piece body Blowout-proof stem Adjustable packing nut Locking lever handle Floating ball Complies with NACE MR-0103 & upplier Requirements of NACE MR-0175/IO PI upplier: MA, Coast ater ystems, or approved alternative ITEM MM (2 ) VICTAULIC 89 ZERO-FLEX RIGI COUPLING Housing: uctile iron conforming to ATM A 536, Grade Max. orking Pressure: 400 psi Gasket: Grade E EPM - EPM (Green stripe color code). Temperature range -34ºC to +110ºC. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ATM A 449 and physical requirements of ATM A 183. upplier: Victaulic, Coast ater ystems, or approved alternative ITEM MM (2 ) AJUTIBLE GALVANIZE TEEL PIPE UPPORT AN ALL PIPE HANGER To Coast ater ystems, or approved alternative specifications Pipe tand: Hot dip galvanized; 1.5 galvanized ch 40 steel pipe Base: 152 mm (6 ) x 152 mm (6 ) x 10 mm (3/8 ) steel flat bar c/w 2.25 x OM tube; 4 x ½ holes Rod: 1 x 6 grade 2 ready rod with adjustable height to suit upplier: Coast ater ystems, or approved alternative ITEM MM (2 ) RAIN C/.. BALL VALVE To Coast ater ystems, or approved alternative specifications upplier: Coast ater ystems, or approved alternative ITEM MM (1 ) VALMATIC 15A AIR RELEAE VALVE C/ IOLATION BALL VALVE Cast iron body with 304 float Inlet 1 NPT; Outlet ½ NPT; Orifice 1/ PI to ATM A126 Class B upplier: Valmatic, Coast ater ystems, or approved alternative ITEM MM (1 ) VALMATIC 201C AIR COMBINATION RELEAE VALVE C/ IOLATION BALL VALVE Cast iron body with 304 float Inlet 1 NPT; Outlet 1 NPT; Orifice 5/ PI to ATM A126 Class B upplier: Valmatic, Coast ater ystems, or approved alternative ITEM MM (3/4 ) HOE BIB AEMBLY upplier: Coast ater ystems, or approved alternative ITEM 18 - PREURE GAUGE AEMBLY C/ IOLATION BALL VALVE, VENT VALVE, AMPLING PORT, AN PROVIION FOR PREURE TRANMITTER Pressure gauges to be oil filled, psi, dual gauge upplier: Coast ater ystems, or approved alternative ITEM 20 - ARMTEC #3152 PRECAT CONCRETE CHAMBER C/ HITE INTERIOR, BLACK EXTERIOR AN CORE HOLE 3310 mm (L) x 1810 mm () x 1225 mm (H), refer to rawing No Manufactured to CA A23.4 upplier: Armtec, Coast ater ystems, or approved alternative ITEM 21 - OBNEY C23 CAT IRON MANHOLE FRAME AN COVER Load: ynamic H20, suitable for installation in roadways upplier: Armtec, Coast ater ystems, or approved alternative ITEM 22 - ALUMINUM LAER C/ AFETY POT To Coast ater ystems specifications, or approved alternative, as shown on rawing No upplier: Coast ater ystems, or approved alternative ITEM 23 - PRAY FOAM INULATION Thickness: min. 50 mm (2 ) Quantity: refer to rawing No upplier: Coast ater ystems, or approved alternative ITEM 24 - ZOELLER MIGHTY-MATE UMP PUMP, MOEL 53/57 ubmersible pump Cast iron construction Non-clogging vortex impeller Corrosion resistant powder coated epoxy finish olid buoyant polypropylene float Passes ½ solids 1 ½ NPT discharge 1550 RPM, 115 V, 1 phase, 9.7 Amps, 60 Hz Motor oil-filled, hermetically sealed, automatic reset thermal overload protected hipped loose c/w PVC piping Installation by the contractor upplier: Zoeller, Coast ater ystems, or approved alternative ITEM MM (6 ) VICTAULIC 89 ZERO-FLEX RIGI COUPLING Housing: uctile iron conforming to ATM A 536, Grade Max. orking Pressure: 400 psi Gasket: Grade E EPM - EPM (Green stripe color code). Temperature range -34ºC to +110ºC. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ATM A 449 and physical requirements of ATM A 183. upplier: Victaulic, Coast ater ystems, or approved alternative ITEM 19 - ARMTEC #4212 PRECAT CONCRETE CHAMBER C/ HITE INTERIOR, BLACK EXTERIOR AN CORE HOLE 4310 mm (L) x 2480 mm () x 2710 mm (H), refer to rawing No Manufactured to CA A23.4 upplier: Armtec, Coast ater ystems, or approved alternative ITEM MM (6 ) LINK EAL AEMBLY To Coast ater ystems (C) specifications, or approved alternative upplier: Coast ater ystems, or approved alternative ITEM MM (6 ) AJUTIBLE GALVANIZE TEEL PIPE UPPORT C galvanized steel pipe supports Pipe tand: Hot dip galvanized; 1.5 galvanized ch 40 steel pipe Base: 152 mm (6 ) x 152 mm (6 ) x 10 mm (3/8 ) steel flat bar c/w 2.25 x OM tube; 4 x ½ holes Rod: 1 x 6 grade 2 ready rod adjustable up to 610 mm Quantity: 4 upplier: Coast ater ystems, or approved alternative

10 N Issued for Information only

11 Issued for Information only

12 GENERAL NOTE: 1. ALL IMENION ARE IN MILLIMETER UNLE OTHERIE NOTE. 2. ALL CONTRUCTION AN MATERIAL HALL CONFORM TO THE MMC (PLATINUM EITION, VOLUME II) TANAR AN TANAR PECIFICATION. 3. ALL ORK HALL COMPLY ITH EQUIPMENT/PROJECT PECIFICATION, LOCAL BY-LA, AN THE REQUIREMENT OF AUTHORITY HAVING JURIICTION. 4. ALL PIPING/FITTING AN APPURTENANCE EXTERNAL TO PRV VAULT ARE A HON ON EIGN RAING. 5. RETORE ALL ITURBE URFACE TO MATCH EXITING OR BETTER, OR A HON ON EIGN RAING. 6. LOCATE EXITING UNERGROUN UTILITIE PRIOR TO EXCAVATION. 7. NO ORK HALL INTERFERE, AN ILL BE COORINATE, ITH OTHER CONTRUCTION ACTIVITIE AT THE ITE OR IN THE AREA BY OTHER. 8. ALL ORK INCLUING ATER UPPLY INTERRUPTION (HUTON) HALL BE COORINATE AN CHEULE ITH THE CONTRUCTION MANAGER OR ITRICT OF ELKFOR. 9. TRAFFIC CONTROL ON PORTION OR ROA AFFECTE BY ORK HALL BE COORINATE ITH THE 10. CONTRUCTION MANAGER. NOTIFY CONULTANT OF CHANGE REQUIRE PRIOR TO MAKING ANY CHANGE. 11. UNUE MATERIAL AN ABANONE PIPE, FITTING, CONCRETE, EXCE NATIVE FILL, AN/OR EQUIPMENT HALL BE IPOE OF AT THE CONTRACTOR' EXPENE. 12. THE CONTRACTOR HALL PROVIE AN INTALL ALL NECEARY MATERIAL, AN PROVIE TOOL AN EQUIPMENT TO ENURE A COMPLETE INTALLATION AN CREATE A FULLY FUNCTIONAL YTEM. 13. THE CONTRACTOR HALL CONFIRM ERVICE LOCATION AN COORINATE INTALLATION ITH BC HYRO. Issued for Information only 14. ORK HALL CONFORM TO ALL APPLICABLE REGULATION AN ORKAFEBC. 15. ON-ITE OCUMENT HALL BE TORE IN A ECURE LOCATION AN HALL NOT BE LEFT IN VEHICLE OVERNIGHT. 16. CONTRACTOR TO PROVIE THE FOLLOING: HOP RAING AN PECIFICATION OF ALL RELATE EQUIPMENT AN MATERIAL FOR APPROVAL PRIOR TO FABRICATION/INTALLATION. OPERATING AN MAINTENANCE MANUAL FOR ALL RELATE EQUIPMENT (3 COPIE). MINIMUM ONE AY TART-UP AN TETING BY THE PREURE REUCING VALVE UPPLIER FOR COMMIIONING OF THE PRV CHAMBER TO BE COORINATE ITH THE PRV CHAMBER UPPLIER. UPPLEMENTARY MECHANICAL PECIFICATION: ITEM NUMBER PROVIE HEREINAFTER MATCH THE MATERIAL LIT TABLE ON RAING No ITEM MM (6 ) MUELLER A NR R GATE VALVE - FLG x PUH ON AA C PI, NF 61 Certified Epoxy coating to AA C550 NR - Non-Rising tem, cast copper alloy with integral collars per AA C509 R - Resilient edge uctile iron body, bonnet, and O-ring plate edge is fully encapsulated with rubber per ATM nuts and bolts Valve to be c/w rod, 150 mm PVC pipe cut to fit, and valve box, operating nut shall be 32 mm square Rod and PVC pipe to be extended to the surface. The operating nut and handwheel shall be marked indicating the direction to open with the word OPEN and an arrow. upplier: Mueller, Clow, Coast ater ystems, or approved alternative ITEM 2 - CLA-VAL 150 MM (6") BFVYKX PREURE REUCING VALVE /ONTREAM URGE FEATURE AN X101 POITION INICATOR uctile Iron Body, (Globe) Pattern T Trim & Fasteners X101 Position indicator 1" tainless teel Pilot Y trainer Remote Pilot ensing CV Opening peed Control Check Feature tainless teel Tubing, Fittings & Ball Valves CR Pilot pring Range PI, et at 45 PI (settable) CRL Pilot pring Range PI, et at 55 PI (settable) upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative =Check feature F=Remote pilot sensing =Opening speed control V= X101 Position indicator KX=tainless steel tubing, fittings & ball valves (in lieu of copper & brass) ITEM 9 - CLA-VAL 50 MM (2 ) BVYKX PREURE REUCING VALVE /ONTREAM URGE FEATURE AN X101 POITION INICATOR uctile Iron Body, (Globe) Pattern T Trim & Fasteners X101 Valve Position Indicator Pilot Ball Valves 1" tainless teel Pilot Y trainer tainless teel Tubing, Fittings & Ball Valves CR Pilot pring Range PI, et at 50 PI (settable) upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative =Opening speed control V=X101 Valve position indicator KX=tainless steel tubing, fittings & ball valves (in lieu of copper & brass) ITEM MM (2 ) CLA-VAL X43H TRAINER 50 mm (2 ) Model X43H H-tyle trainer uctile Iron Body 316 T trainer, 10 Mesh Buna-N Cover eal Fusion Epoxy Lined and Coated, 1.25" rain/blow-off Plug upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative ITEM MM (2 ) MA G2E BALL VALVE Full port, NPT ends to ANI B Two-piece body Blowout-proof stem Adjustable packing nut Locking lever handle Floating ball Complies with NACE MR-0103 & upplier Requirements of NACE MR-0175/IO PI upplier: MA, Coast ater ystems, or approved alternative ITEM 20 - ARMTEC #3152 PRECAT CONCRETE CHAMBER C/ HITE INTERIOR, BLACK EXTERIOR AN CORE HOLE 3310 mm (L) x 1810 mm () x 1225 mm (H), refer to rawing No Manufactured to CA A23.4 upplier: Armtec, Coast ater ystems, or approved alternative ITEM 21 - OBNEY C23 CAT IRON MANHOLE FRAME AN COVER Load: ynamic H20, suitable for installation in roadways upplier: Armtec, Coast ater ystems, or approved alternative ITEM 22 - ALUMINUM LAER C/ AFETY POT To Coast ater ystems specifications, or approved alternative, as shown on rawing No upplier: Coast ater ystems, or approved alternative ITEM 23 - PRAY FOAM INULATION Thickness: min. 50 mm (2 ) Quantity: refer to rawing No upplier: Coast ater ystems, or approved alternative ITEM 24 - ZOELLER MIGHTY-MATE UMP PUMP, MOEL 53/57 ubmersible pump Cast iron construction Non-clogging vortex impeller Corrosion resistant powder coated epoxy finish olid buoyant polypropylene float Passes ½ solids 1 ½ NPT discharge 1550 RPM, 115 V, 1 phase, 9.7 Amps, 60 Hz Motor oil-filled, hermetically sealed, automatic reset thermal overload protected hipped loose c/w PVC piping Installation by the contractor upplier: Zoeller, Coast ater ystems, or approved alternative 17. THE CONTRACTOR HALL PROVIE A COMPLETE AEMBLE PRV MANIFOL/VAULT AEMBLY A PER THE ATTACHE RAING and THE CONTRACTOR HALL ENURE THAT THE PRV MANIFOL/VAULT AEMBLY ILL COMPLY ITH UPPLEMENTARY MECHANICAL PECIFICATION ON HEET & EIGN RAING IN AITION TO THE EIGN HON ON HEET & ELECTRICAL RAING/PECIFICATION, THE CONTRACTOR ILL ORK ITH THE ENGINEER IN ORER TO ETERMINE THE APPROPRIATE ITE & LOCATION OF ELECTRICAL PENETRATION. 19. THE CONTRACTOR HALL BE PREENT URING INTALLATION OF THE PRV MAINFOL/VAULT AEMBLY ONITE TO ORK ITH THE ENGINEER & EQUIPMENT UPPLIER URING TART UP. 20. PROVIE A ROBAR RETRAINE COUPLING AT TIE-IN TO THE EXITING ATER MAIN EXTERNAL TO THE PRV VAULT, A HON ON RAING No ROBAR RETRAINE COUPLING PECIFICATION: 200 MM (8 ) X 150 MM (6 ) ROBAR 1506R REUCING COUPLING Center leeve: Cast uctile Iron. Min. orking Pressure: 250 psi End Rings: Cast uctile Iron. Gaskets: BR (Buna ) Rubber. Fasteners: 5/8 NC T304 tainless teel. Nuts coated with anti-galling compound. Torque is ft. lbs. Coating: Corrosion Protective Epoxy coating. upplier: Robar Industries, Coast ater ystems, or approved alternative Refer to rawing No for location. 250 MM (10 ) X 200 MM (8 ) ROBAR 1506R REUCING COUPLING Center leeve: Cast uctile Iron. Min. orking Pressure: 250 psi End Rings: Cast uctile Iron. Gaskets: BR (Buna ) Rubber. Fasteners: 5/8 NC T304 tainless teel. Nuts coated with anti-galling compound. Torque is ft. lbs. Coating: Corrosion Protective Epoxy coating. upplier: Robar Industries, Coast ater ystems, or approved alternative Refer to rawing No for location. ITEM MM (6 ) CLA-VAL X43H TRAINER 150 mm (6") Model X43H H-tyle trainer uctile Iron Body 316 T trainer, 10 Mesh Buna-N Cover eal Fusion Epoxy Lined and Coated, 1.25" rain/blow-off Plug upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative ITEM 4 - MAGNETIC FLO METER ROEMOUNT 8750 / GROUNING RING Model# 8750E1A1FPA060CA1Z6M4G5 8750: Magnetic Flowmeter/Transmitter + : Revision "" E: Revision 3 Electronics : Remote all Mount 1: Ac Power upply (90 to 250VAC, 50 60Hz) A: 4-20 ma igital Electronics calable Pulse 1: 1/2-14 NPT F: Flanged P: Polyurethane : 316L tainless teel A: 2Measurement Electrodes - tandard 060: 6.0"(150mm) C: lip-on, Raised-Face, Carbon teel A1: AME B16.5, Class 150 Z6: CA, Class I iv 2 for Non-Flammable Fluids; IP M4: Local Operator Interface G5: Ground Ring 316 T Quantity 1 : rinking ater Certificate, NF upplier: Rosemount, Coast ater ystems, or approved alternative ITEM MM (6 ) MUELLER A NR R GATE VALVE - FLG x FLG, OR 150 MM (6 ) CLO F6102 NR R GATE VALVE - FLG x FLG AA C PI, NF 61 Certified Epoxy coating to AA C550 NR - Non-Rising tem, cast copper alloy with integral collars per AA C509 R - Resilient edge uctile iron body, bonnet, and O-ring plate edge is fully encapsulated with rubber per ATM nuts and bolts The operating handwheel shall be marked indicating the direction to open with the word OPEN and an arrow. upplier: Mueller, Clow, Coast ater ystems, or approved alternative ITEM MM (2 ) VICTAULIC 89 ZERO-FLEX RIGI COUPLING Housing: uctile iron conforming to ATM A 536, Grade Max. orking Pressure: 400 psi Gasket: Grade E EPM - EPM (Green stripe color code). Temperature range -34ºC to +110ºC. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ATM A 449 and physical requirements of ATM A 183. upplier: Victaulic, Coast ater ystems, or approved alternative ITEM MM (2 ) AJUTIBLE GALVANIZE TEEL PIPE UPPORT AN ALL PIPE HANGER To Coast ater ystems, or approved alternative specifications Pipe tand: Hot dip galvanized; 1.5 galvanized ch 40 steel pipe Base: 152 mm (6 ) x 152 mm (6 ) x 10 mm (3/8 ) steel flat bar c/w 2.25 x OM tube; 4 x ½ holes Rod: 1 x 6 grade 2 ready rod with adjustable height to suit upplier: Coast ater ystems, or approved alternative ITEM MM (2 ) RAIN C/.. BALL VALVE To Coast ater ystems, or approved alternative specifications upplier: Coast ater ystems, or approved alternative ITEM MM (1 ) VALMATIC 15A AIR RELEAE VALVE C/ IOLATION BALL VALVE Cast iron body with 304 float Inlet 1 NPT; Outlet ½ NPT; Orifice 1/ PI to ATM A126 Class B upplier: Valmatic, Coast ater ystems, or approved alternative ITEM MM (1 ) VALMATIC 201C AIR COMBINATION RELEAE VALVE C/ IOLATION BALL VALVE Cast iron body with 304 float Inlet 1 NPT; Outlet 1 NPT; Orifice 5/ PI to ATM A126 Class B upplier: Valmatic, Coast ater ystems, or approved alternative ITEM MM (3/4 ) HOE BIB AEMBLY upplier: Coast ater ystems, or approved alternative ITEM 18 - PREURE GAUGE AEMBLY C/ IOLATION BALL VALVE, VENT VALVE, AMPLING PORT, AN PROVIION FOR PREURE TRANMITTER Pressure gauges to be oil filled, psi, dual gauge upplier: Coast ater ystems, or approved alternative ITEM MM (6 ) VICTAULIC 89 ZERO-FLEX RIGI COUPLING Housing: uctile iron conforming to ATM A 536, Grade Max. orking Pressure: 400 psi Gasket: Grade E EPM - EPM (Green stripe color code). Temperature range -34ºC to +110ºC. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ATM A 449 and physical requirements of ATM A 183. upplier: Victaulic, Coast ater ystems, or approved alternative ITEM 19 - ARMTEC #4212 PRECAT CONCRETE CHAMBER C/ HITE INTERIOR, BLACK EXTERIOR AN CORE HOLE 4310 mm (L) x 2480 mm () x 2710 mm (H), refer to rawing No Manufactured to CA A23.4 upplier: Armtec, Coast ater ystems, or approved alternative ITEM MM (6 ) LINK EAL AEMBLY To Coast ater ystems (C) specifications, or approved alternative upplier: Coast ater ystems, or approved alternative ITEM MM (6 ) AJUTIBLE GALVANIZE TEEL PIPE UPPORT C galvanized steel pipe supports Pipe tand: Hot dip galvanized; 1.5 galvanized ch 40 steel pipe Base: 152 mm (6 ) x 152 mm (6 ) x 10 mm (3/8 ) steel flat bar c/w 2.25 x OM tube; 4 x ½ holes Rod: 1 x 6 grade 2 ready rod adjustable up to 610 mm Quantity: 4 upplier: Coast ater ystems, or approved alternative

13 N Issued for Information only

14 Issued for Information only

15 GENERAL NOTE: 1. ALL IMENION ARE IN MILLIMETER UNLE OTHERIE NOTE. 2. ALL CONTRUCTION AN MATERIAL HALL CONFORM TO THE MMC (PLATINUM EITION, VOLUME II) TANAR AN TANAR PECIFICATION. 3. ALL ORK HALL COMPLY ITH EQUIPMENT/PROJECT PECIFICATION, LOCAL BY-LA, AN THE REQUIREMENT OF AUTHORITY HAVING JURIICTION. 4. ALL PIPING/FITTING AN APPURTENANCE EXTERNAL TO PRV VAULT ARE A HON ON EIGN RAING. 5. RETORE ALL ITURBE URFACE TO MATCH EXITING OR BETTER, OR A HON ON EIGN RAING. 6. LOCATE EXITING UNERGROUN UTILITIE PRIOR TO EXCAVATION. 7. NO ORK HALL INTERFERE, AN ILL BE COORINATE, ITH OTHER CONTRUCTION ACTIVITIE AT THE ITE OR IN THE AREA BY OTHER. 8. ALL ORK INCLUING ATER UPPLY INTERRUPTION (HUTON) HALL BE COORINATE AN CHEULE ITH THE CONTRUCTION MANAGER OR ITRICT OF ELKFOR. 9. TRAFFIC CONTROL ON PORTION OR ROA AFFECTE BY ORK HALL BE COORINATE ITH THE CONTRUCTION MANAGER. 10. NOTIFY CONULTANT OF CHANGE REQUIRE PRIOR TO MAKING ANY CHANGE. 11. UNUE MATERIAL AN ABANONE PIPE, FITTING, CONCRETE, EXCE NATIVE FILL, AN/OR EQUIPMENT HALL BE IPOE OF AT THE CONTRACTOR' EXPENE. 12. THE CONTRACTOR HALL PROVIE AN INTALL ALL NECEARY MATERIAL, AN PROVIE TOOL AN EQUIPMENT TO ENURE A COMPLETE INTALLATION AN CREATE A FULLY FUNCTIONAL YTEM. Issued for Information only 13. THE CONTRACTOR HALL CONFIRM ERVICE LOCATION AN COORINATE INTALLATION ITH BC HYRO. 14. ORK HALL CONFORM TO ALL APPLICABLE REGULATION AN ORKAFEBC. 15. ON-ITE OCUMENT HALL BE TORE IN A ECURE LOCATION AN HALL NOT BE LEFT IN VEHICLE OVERNIGHT. 16. CONTRACTOR TO PROVIE THE FOLLOING: HOP RAING AN PECIFICATION OF ALL RELATE EQUIPMENT AN MATERIAL FOR APPROVAL PRIOR TO FABRICATION/INTALLATION. OPERATING AN MAINTENANCE MANUAL FOR ALL RELATE EQUIPMENT (3 COPIE). MINIMUM ONE AY TART-UP AN TETING BY THE PREURE REUCING VALVE UPPLIER FOR COMMIIONING OF THE PRV CHAMBER TO BE COORINATE ITH THE This PRV CHAMBER UPPLIER. must be read in conjunction 17. THE CONTRACTOR HALL PROVIE A COMPLETE AEMBLE PRV MANIFOL/VAULT AEMBLY A PER THE ATTACHE RAING and THE CONTRACTOR HALL ENURE THAT THE PRV MANIFOL/VAULT AEMBLY ILL COMPLY ITH UPPLEMENTARY MECHANICAL PECIFICATION ON HEET & EIGN RAING IN AITION TO THE EIGN HON ON HEET & ELECTRICAL RAING/PECIFICATION, THE CONTRACTOR ILL ORK ITH THE ENGINEER IN ORER TO ETERMINE THE APPROPRIATE ITE & LOCATION OF ELECTRICAL PENETRATION. 19. THE CONTRACTOR HALL BE PREENT URING INTALLATION OF THE PRV MAINFOL/VAULT AEMBLY ONITE TO ORK ITH THE ENGINEER & EQUIPMENT UPPLIER URING TART UP. 20. PROVIE A ROBAR RETRAINE COUPLING AT TIE-IN TO THE EXITING ATER MAIN EXTERNAL TO THE PRV VAULT, A HON ON RAING No ROBAR RETRAINE COUPLING PECIFICATION: 250 MM (10 ) X 200 MM (8 ) ROBAR 1506R REUCING COUPLING Center leeve: Cast uctile Iron. Min. orking Pressure: 250 psi End Rings: Cast uctile Iron. Gaskets: BR (Buna ) Rubber. Fasteners: 5/8 NC T304 tainless teel. Nuts coated with anti-galling compound. Torque is ft. lbs. Coating: Corrosion Protective Epoxy coating. upplier: Robar Industries, Coast ater ystems, or approved alternative Refer to rawing No for location. Center leeve: Cast uctile Iron. 300 MM (12 ) X 250 MM (10 ) ROBAR 1506R REUCING COUPLING Min. orking Pressure: 250 psi End Rings: Cast uctile Iron. Gaskets: BR (Buna ) Rubber. Fasteners: 5/8 NC T304 tainless teel. Nuts coated with anti-galling compound. Torque is ft. lbs. Coating: Corrosion Protective Epoxy coating. upplier: Robar Industries, Coast ater ystems, or approved alternative Refer to rawing No for location. UPPLEMENTARY MECHANICAL PECIFICATION: ITEM NUMBER PROVIE HEREINAFTER MATCH THE MATERIAL LIT TABLE ON RAING No ITEM MM (8 ) MUELLER A NR R GATE VALVE - FLG x PUH ON AA C PI, NF 61 Certified Epoxy coating to AA C550 NR - Non-Rising tem, cast copper alloy with integral collars per AA C509 R - Resilient edge uctile iron body, bonnet, and O-ring plate edge is fully encapsulated with rubber per ATM nuts and bolts Valve to be c/w rod, 150 mm PVC pipe cut to fit, and valve box, operating nut shall be 32 mm square Rod and PVC pipe to be extended to the surface. The operating nut and handwheel shall be marked indicating the direction to open with the word OPEN and an arrow. upplier: Mueller, Clow, Coast ater ystems, or approved alternative ITEM 2 - CLA-VAL 200 MM (8") BFVYKX PREURE REUCING VALVE /ONTREAM URGE FEATURE AN X101 POITION INICATOR uctile Iron Body, (Globe) Pattern T Trim & Fasteners X101 Position indicator 1" tainless teel Pilot Y trainer Remote Pilot ensing CV Opening peed Control Check Feature tainless teel Tubing, Fittings & Ball Valves CR Pilot pring Range PI, et at 39 PI (settable) CRL Pilot pring Range PI, et at 49 PI (settable) upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative =Check feature F=Remote pilot sensing =Opening speed control V= X101 Position indicator KX=tainless steel tubing, fittings & ball valves (in lieu of copper & brass) ITEM MM (8 ) CLA-VAL X43H TRAINER 150 mm (6") Model X43H H-tyle trainer uctile Iron Body 316 T trainer, 10 Mesh Buna-N Cover eal Fusion Epoxy Lined and Coated, 1.25" rain/blow-off Plug upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative ITEM 4 - MAGNETIC FLO METER ROEMOUNT 8750 / GROUNING RING Model# 8750E1A1FPA060CA1Z6M4G5 8750: Magnetic Flowmeter/Transmitter + : Revision "" E: Revision 3 Electronics : Remote all Mount 1: Ac Power upply (90 to 250VAC, 50 60Hz) A: 4-20 ma igital Electronics calable Pulse 1: 1/2-14 NPT F: Flanged P: Polyurethane : 316L tainless teel A: 2Measurement Electrodes - tandard 080: 6.0"(200mm) C: lip-on, Raised-Face, Carbon teel A1: AME B16.5, Class 150 Z6: CA, Class I iv 2 for Non-Flammable Fluids; IP M4: Local Operator Interface G5: Ground Ring 316 T Quantity 1 : rinking ater Certificate, NF upplier: Rosemount, Coast ater ystems, or approved alternative ITEM MM (8 ) MUELLER A NR R GATE VALVE - FLG x FLG, OR 200 MM (8 ) CLO F6102 NR R GATE VALVE - FLG x FLG AA C PI, NF 61 Certified Epoxy coating to AA C550 NR - Non-Rising tem, cast copper alloy with integral collars per AA C509 R - Resilient edge uctile iron body, bonnet, and O-ring plate edge is fully encapsulated with rubber per ATM nuts and bolts The operating handwheel shall be marked indicating the direction to open with the word OPEN and an arrow. upplier: Mueller, Clow, Coast ater ystems, or approved alternative ITEM 9 - CLA-VAL 50 MM (2 ) BVYKX PREURE REUCING VALVE /ONTREAM URGE FEATURE AN X101 POITION INICATOR uctile Iron Body, (Globe) Pattern T Trim & Fasteners X101 Valve Position Indicator Pilot Ball Valves 1" tainless teel Pilot Y trainer tainless teel Tubing, Fittings & Ball Valves CR Pilot pring Range PI, et at 44 PI (settable) upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative =Opening speed control V=X101 Valve position indicator KX=tainless steel tubing, fittings & ball valves (in lieu of copper & brass) ITEM MM (2 ) CLA-VAL X43H TRAINER 50 mm (2 ) Model X43H H-tyle trainer uctile Iron Body 316 T trainer, 10 Mesh Buna-N Cover eal Fusion Epoxy Lined and Coated, 1.25" rain/blow-off Plug upplier: Cla-Val, partan Controls, Coast ater ystems, or approved alternative ITEM MM (2 ) MA G2E BALL VALVE Full port, NPT ends to ANI B Two-piece body Blowout-proof stem Adjustable packing nut Locking lever handle Floating ball Complies with NACE MR-0103 & upplier Requirements of NACE MR-0175/IO PI upplier: MA, Coast ater ystems, or approved alternative ITEM MM (2 ) VICTAULIC 89 ZERO-FLEX RIGI COUPLING Housing: uctile iron conforming to ATM A 536, Grade Max. orking Pressure: 400 psi Gasket: Grade E EPM - EPM (Green stripe color code). Temperature range -34ºC to +110ºC. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ATM A 449 and physical requirements of ATM A 183. upplier: Victaulic, Coast ater ystems, or approved alternative ITEM MM (2 ) AJUTIBLE GALVANIZE TEEL PIPE UPPORT AN ALL PIPE HANGER To Coast ater ystems, or approved alternative specifications Pipe tand: Hot dip galvanized; 1.5 galvanized ch 40 steel pipe Base: 152 mm (6 ) x 152 mm (6 ) x 10 mm (3/8 ) steel flat bar c/w 2.25 x OM tube; 4 x ½ holes Rod: 1 x 6 grade 2 ready rod with adjustable height to suit upplier: Coast ater ystems, or approved alternative ITEM MM (2 ) RAIN C/.. BALL VALVE To Coast ater ystems, or approved alternative specifications upplier: Coast ater ystems, or approved alternative ITEM MM (1 ) VALMATIC 15A AIR RELEAE VALVE C/ IOLATION BALL VALVE Cast iron body with 304 float Inlet 1 NPT; Outlet ½ NPT; Orifice 1/ PI to ATM A126 Class B upplier: Valmatic, Coast ater ystems, or approved alternative ITEM MM (1 ) VALMATIC 201C AIR COMBINATION RELEAE VALVE C/ IOLATION BALL VALVE Cast iron body with 304 float Inlet 1 NPT; Outlet 1 NPT; Orifice 5/ PI to ATM A126 Class B upplier: Valmatic, Coast ater ystems, or approved alternative ITEM MM (3/4 ) HOE BIB AEMBLY upplier: Coast ater ystems, or approved alternative ITEM 18 - PREURE GAUGE AEMBLY C/ IOLATION BALL VALVE, VENT VALVE, AMPLING PORT, AN PROVIION FOR PREURE TRANMITTER Pressure gauges to be oil filled, psi, dual gauge upplier: Coast ater ystems, or approved alternative ITEM 20 - ARMTEC #3152 PRECAT CONCRETE CHAMBER C/ HITE INTERIOR, BLACK EXTERIOR AN CORE HOLE 3310 mm (L) x 1810 mm () x 1225 mm (H), refer to rawing No Manufactured to CA A23.4 upplier: Armtec, Coast ater ystems, or approved alternative ITEM 21 - OBNEY C23 CAT IRON MANHOLE FRAME AN COVER Load: ynamic H20, suitable for installation in roadways upplier: Armtec, Coast ater ystems, or approved alternative ITEM 22 - ALUMINUM LAER C/ AFETY POT To Coast ater ystems specifications, or approved alternative, as shown on rawing No upplier: Coast ater ystems, or approved alternative ITEM 23 - PRAY FOAM INULATION Thickness: min. 50 mm (2 ) Quantity: refer to rawing No upplier: Coast ater ystems, or approved alternative ITEM 24 - ZOELLER MIGHTY-MATE UMP PUMP, MOEL 53/57 ubmersible pump Cast iron construction Non-clogging vortex impeller Corrosion resistant powder coated epoxy finish olid buoyant polypropylene float Passes ½ solids 1 ½ NPT discharge 1550 RPM, 115 V, 1 phase, 9.7 Amps, 60 Hz Motor oil-filled, hermetically sealed, automatic reset thermal overload protected hipped loose c/w PVC piping Installation by the contractor upplier: Zoeller, Coast ater ystems, or approved alternative ITEM MM (8 ) VICTAULIC 89 ZERO-FLEX RIGI COUPLING Housing: uctile iron conforming to ATM A 536, Grade Max. orking Pressure: 400 psi Gasket: Grade E EPM - EPM (Green stripe color code). Temperature range -34ºC to +110ºC. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ATM A 449 and physical requirements of ATM A 183. upplier: Victaulic, Coast ater ystems, or approved alternative ITEM 19 - ARMTEC #4212 PRECAT CONCRETE CHAMBER C/ HITE INTERIOR, BLACK EXTERIOR AN CORE HOLE 4310 mm (L) x 2480 mm () x 2710 mm (H), refer to rawing No Manufactured to CA A23.4 upplier: Armtec, Coast ater ystems, or approved alternative ITEM MM (8 ) LINK EAL AEMBLY To Coast ater ystems (C) specifications, or approved alternative upplier: Coast ater ystems, or approved alternative ITEM MM (8 ) AJUTIBLE GALVANIZE TEEL PIPE UPPORT C galvanized steel pipe supports Pipe tand: Hot dip galvanized; 1.5 galvanized ch 40 steel pipe Base: 152 mm (6 ) x 152 mm (6 ) x 10 mm (3/8 ) steel flat bar c/w 2.25 x OM tube; 4 x ½ holes Rod: 1 x 6 grade 2 ready rod adjustable up to 610 mm Quantity: 4 upplier: Coast ater ystems, or approved alternative