WATERPRESS BOOSTER SETS WITH 24L HORIZONTAL EXPANSION TANK. Design features

Transcription

1 WATERPRESS BOOSTER SETS WITH 24L HORIZONTAL EXPANSION TANK The WATERPRESS booster sets are made up of JET self-priming centrifugal pumps. They are supplied wired, tested and complete with 24l expansion tank. Ready to use. Applications - Pumping and distribution of water in domestic systems - Booster systems - Washing systems and irrigation Usage limitations -Type of liquid: clean water with no suspended solids or abrasive material - Maximum liquid temperature C - Maximum suction height 8m with foot valve -Maximum operating pressure 6 bar Pressure switch (max 6 bar) calibrated at: min 2 - max 3 bar Pressure gauge (6 bar) Chromium plated pressed brass 3 way fitting (model Waterpress 7/) 24Lt painted steel expansion tank with interchangeable food quality rubber diaphragm. Flexible pipe for water connection 1,5 m H5 RN-F power supply cable with plug Motor -Enclosed, externally ventilated -Level of protection IP44 -Class F insulation -Single phase power supply with capacitor permanently activated -Thermal protection built into the motor winding -Speed of rotation 28 rpm -Suitable for continuous use Impeller WATERPRESS / - / WATERPRESS 7/ EN GJL ( ex G ) Cast iron EN GJL ( ex G )Cast iron Aluminium EN GJL ( ex G )Cast iron with X5 CrNi 18 ( Aisi 4 ) stainless steel shim ring Diffuser Venturi tube - nozzle Motor shaft O ring Monobloc technopolymer assembly X5 CrNi 18 ( AISI 4 ) Stainless steel NBR 7 shore X 12 CrNiS 19 ( AISI 416 ) Stainless steel NBR 7 shore 214

2 WATERPRESS TABLE OF HYDRAULIC PERFORMANCE Hm L / 1' Q m 3 / h,6 1, ,2 PUMP PERFORMANCE CODE MODEL Nominal Absorbed L/1' power power VOLTAGE Amp. µf. Q HP kw HP kw m 3 /h,3 1, ,2 N597 WATERPRESS /,5,37,8,6 1 ~ 2 2 V Discharge N591 WATERPRESS /,75,55 1,1,8 1 ~ 2 2 V 4 head in meters N597 WATERPRESS 7/ 1,36 1 1,5 1,1 1 ~ 2 2 V TABLE OF SIZES AND WEIGHTS Dimensions mm. Model A B C D DNA DNM WATERPRESS / WATERPRESS / WATERPRESS 7/ Weight kg 13,7 14,5 22,3 WATERPRESS 215

3 WATERPRESS INOX BOOSTER SET WITH 24 Lt HORIZONTAL EXPANSION TANK The WATERPRESS INOX booster sets are produced with JETINOX or MAX pumps. They are supplied wired, complete with 24 lt expansion tank, ready to use. Motor Enclosed, externally ventilated Level of protection: IP44 Class insulation: F Single phase power supply with capacitor permanently activated. Thermal protection built into the motor winding Speed of rotation: 28 rpm. Suitable for continuous use. Pressure switch (max 6 bar) calibrated at: min 2 max 3 bar Pressure gauge (6 bar) Chromium plated pressed brass 5 way fitting 24Lt painted steel expansion tank with interchangeable food quality rubber diaphragm. Flexible pipe for water connection 1,5 m H5 RN-F power supply cable with plug Applications - Pumping and distribution of water in domestic systems - Booster systems - Washing systems and irrigation Usage limitations Type of liquid: clean water with no suspended solids or abrasive materials Maximum liquid temperature: C Maximum suction height 8 m with foot valve (7m for WATERPRESS INOX /48) Maximum operating pressure: 6 bar DESIGN FEATURES WP INOX 7/ Monobloc diffusor- Venturi tube - nozzle assembly Shaft X 12 CrNiS 19 (AISI 416) Stainless steel DESIGN FEATURES WP INOX /48 Diffuser Shaft (hydraulic end) 216

4 WATERPRESS INOX TABLE OF HYDRAULIC PERFORMANCE 7 / Hm Q L / 1' m 3 / h,6 1, ,2 PUMP PERFORMANCE CODE MODEL Nominal power HP kw Absorbed power HP kw VOLTAGE Amp. µf. Q N597 WP INOX 7/,95,7 1,36 1, 1 ~ 2 V 4,5 16 Discharge 48 37, head N511 WP INOX /48,75,55 1,1,8 1 ~ 2 V 4 12,5 in meters L/1' m 3 /h TABLE OF SIZES AND WEIGHTS Dimensions mm. Model A B C D DNA DNM WATERPRESS INOX 7/ WATERPRESS INOX / Weight kg 13,8 12,3 WATERPRESS INOX 217

5 WATERPRESS INOX L BOOSTER SET WITH Lt HORIZONTAL EXPANSION TANK The WATERPRESS INOX L is a booster set produced with MAX self-priming multistage centrifugal pump. It is supplied wired, complete with Lt expansion tank, ready to use. WP INOX /48 - Lt with AQUA TROL electronic pressure switch Applications WP INOX /48 - Lt with electromechanical pressure switch - Pumping and distribution of water in domestic systems - Booster systems - Washing systems and irrigation Motor - Enclosed, externally ventilated - Level of protection IP44 - Class F insulation - Single phase power supply with capacitor permanently activated - Thermal protection built into the motor winding - Speed of rotation 28 rpm - Suitable for continuous use Usage limitations - Type of liquid: clean water with no suspended solids or abrasive material - Maximum liquid temperature C - Maximum suction height recommended 7 m with foot valve - Maximum operating pressure 7 bar WP INOX /48 - L: electromechanical pressure switch (max 6 bar) set at min 2 max 3 bar WP INOX 1/ - L: electronic control and protection pressure switch AQUA TROL. Adjustable pump's starting pressure: from 1,5 to 3 bar. Pressure gauge (6 bar) Chromium plated pressed brass 5 way fitting Lt painted steel expansion tank with interchangeable food quality rubber diaphragm. Flexible pipe for water connection 1,5 m H5 RN-F power supply cable with plug DESIGN FEATURES Diffuser Shaft (hydraulic end) 218

6 WATERPRESS INOX L TABLE OF HYDRAULIC PERFORMANCE / 48 Hm Q L / 1' m 3 / h 6 1 7,2 PUMP PERFORMANCE CODE MODEL Nominal power HP kw Absorbed power HP kw VOLTAGE Amp. µf. Q N511 WP INOX /48,75,55 1,1,8 1 ~ 2 V 4 12,5 Discharge head N511 WP INOX 1 /,9 1,7 5 1 ~ 2 2 V 5,8 in meters L/1' m 3 /h TABLE OF SIZES AND WEIGHTS Model Dimensions mm. Weight A B C D DNA DNM kg WATERPRESS / WATERPRESS 1/ WATERPRESS INOX L 219

7 WATERPRESS SUPERINOX BOOSTER SET WITH 24 Lt HORIZONTAL EXPANSION TANK The WATERPRESS SUPERINOX is a booster set produced with JETINOX or MAX self priming centrifugal pump. It is supplied wired and complete with stainless steel expansion tank. Motor - Enclosed, externally ventilated - Level of protection IP44 - Class F insulation - Single phase power supply with capacitor permanently activated - Thermal protection built into the motor winding - Speed of rotation 28 rpm - Suitable for continuous use Usage limitations Type of liquid: clean water with no suspended solids or abrasive materials Maximum liquid temperature: C Maximum suction height with foot valve: 8 m WP Superinox / 7 m WP Superinox 1/ Maximum operating pressure: 6 bar WP Superinox / 7 bar WP Superinox 1/ Applications Pressure switch (max. 6 bar) set at: min 2 max 3 bar Pressure gauge (6 bar) Chromium plated pressed brass 5 way fitting 24 Lt stainless steel expansion tank with interchangeable food quality rub. Flexible pipe for water connection. 1,5 m H5 RN-F power supply cable with plug - Pumping and distribution of water in domestic systems - Booster systems - Washing systems and irrigation DESIGN FEATURES WP SUPERINOX / Monobloc diffuser Venturi tube - nozzle assembly Shaft (hydraulic end) X 12 CrNiS 19 (AISI 416) Stainless steel DESIGN FEATURES WP SUPERINOX 1/ Diffuser Shaft (hydraulic end) 2

8 WATERPRESS SUPERINOX TABLE OF HYDRAULIC PERFORMANCE 1/ Hm Q L / 1' m 3 / h 6 1 7,2 PUMP PERFORMANCE CODE MODEL Nominal Absorbed L/1' power power VOLTAGE Amp. µf. Q HP kw HP kw m 3 /h 3 N596 WP SUPERINOX / C,75,55 1,1,8 1 ~ 2 2 V 4 12,5 Discharge head in meters N511 WP SUPERINOX 1/ C,9 1,7 5 1 ~ 2 2 V 5, TABLE OF SIZES AND WEIGHTS Model A Dimensions mm. B C D DNA DNM WP SUPERINOX / C WP SUPERINOX 1/ C ,2 Weight kg WATERPRESS SUPERINOX 221