DP router boring and shaping bits
|
|
- Griselda Caldwell
- 5 years ago
- Views:
Transcription
1 DP router boring and haping bit PUSBPFCDRS PUSBPFCDS Router bit for the boring, haping and quaring of chipboard panel coated with veneer or platic material. Good aphonic degree and, thank to the teeth axial inclination, achievement of a better finihing in the area of the panel coating. eft hand or right hand rotation. 7-8 reharpening. Available alo in MK2 and MK3 verion. Apt to be ued on Working Center: BIESSE, HOMAG, MORBIDEI, SCM and other. M HW HW MANCINI utenili
2 DP router boring and haping bit PUSBPFCDRS PUSBPFCDS z HW 16x HW 16x HW 16x HW 16x HW 16x HW 16x HW 20x HW 20x HW 20x HW 20x HW 25x HW 25x HW 25x HW 20x HW 20x HW 20x decription ize Adjuting crew with lock nut for cylindrical hank diam. Ø 16 M5 x 20 Adjuting crew with lock nut for cylindrical hank diam. Ø 20 M6 x 20 Adjuting crew with lock nut for cylindrical hank diam. Ø 25 M8 x HW 20x HW 25x HW 25x HW 25x HW 25x decription ize Adjuting crew for EUCO Sytem with cylindrical hank diam. Ø 16 M6 x 20 Adjuting crew for EUCO Sytem with cylindrical hank diam. Ø 25 M8 x 25 z 5/ /8 5/8 x1 3/ (15,9) 25,4 3+1 HW 86 16x45 3/ /8 5/8 x1 3/ (19) 25,4 3+1 HW 86 16x45 3/4 1 5/8 3 7/8 5/8 x1 3/ (19) 41,3 5+1 HW 98 16x45 MANCINI utenili
3 DP router boring and haping bit, economical model PUSBPFCURS PUSBPFCUS Router bit for the boring, haping and quaring of chipboard panel coated with veneer or platic material. Good aphonic degree and, thank to the teeth axial inclination, achievement of a better finihing in the area of the panel coating. eft hand or right hand rotation. 2-3 reharpening. Available alo in MK2 and MK3 verion. Apt to be ued on Working Center: BIESSE, HOMAG, MORBIDEI, SCM and other. M HW HW MANCINI utenili
4 DP router boring and haping bit, economical model z HW 12x HW 12x HW 12x HW 12x HW 16x HW 16x HW 16x HW 16x HW 16x HW 16x HW 16x HW 20x HW 20x HW 20x HW 20x HW 25x HW 25x HW 25x HW 20x HW 20x HW 20x HW 20x HW 25x decription Adjuting crew with lock nut for cylindrical hank diam. Ø 12 M4 x 20 Adjuting crew with lock nut for cylindrical hank diam. Ø 16 M5 x 20 Adjuting crew with lock nut for cylindrical hank diam. Ø 20 M6 x 20 Adjuting crew with lock nut for cylindrical hank diam. Ø 25 M8 x 20 decription ize ize Adjuting crew for EUCO Sytem with cylindrical hank diam. Ø 16 M6 x 20 Adjuting crew for EUCO Sytem with cylindrical hank diam. Ø 25 M8 x HW 25x HW 25x HW 25x z 1/ /4 1/2 x1 3/ (12,7) 25,4 3+1 HW 70 12,7x35 5/ /8 1/2 x1 3/ (15,9) 25,4 3+1 HW 73 12,7x35 5/ /8 5/8 x1 3/ (15,9) 25,4 3+1 HW 86 16x45 3/ /8 5/8 x1 3/ (19) 25,4 3+1 HW 86 16x45 3/4 1 5/8 3 7/8 5/8 x1 3/ (19) 41,3 5+1 HW 98 16x45 MANCINI utenili
5 DP multicutting helicoidal router bit PUSBTMUDRS PUSBTMUDS Router bit for the boring, haping and quaring of chipboard panel coated with veneer or platic material. High working peed and very good finihing. The teeth helicoidal hape enure high aphonic degree and an eay expulion of the wood chip. eft hand or right hand rotation. 7-8 reharpening. Available alo in MK2 e MK3 verion. Apt to be ued on Working Center: BIESSE, HOMAG, MORBIDEI, SCM and other. decription ize Adjuting crew with lock nut for cylindrical hank diam. Ø 20 M6 x 20 Adjuting crew with lock nut for cylindrical hank diam. Ø 25 M8 x 20 Adjuting crew for EUCO Sytem cylindrical hank diam. Ø 25 M8 x 25 z x x x x x Ø Ø x x x x x x x x x x x x MANCINI utenili
6 DP multicutting helicoidal router bit, 4 teeth PUSBMUTDRS PUSBMUTDS Router bit for the haping and quaring of chipboard panel coated with veneer or platic material. The axial deign of the inclined teeth increae the quality of cut in the area of the panel coating. Good compromie between working peed and finihing. eft hand or right hand rotation. 7-8 reharpening. Available alo in MK2 and MK3 verion. Apt to be ued on Working Center: BIESSE, HOMAG, MORBIDEI, SCM and other. p decription ize Adjuting crew with lock nut for cylindrical hank diam. Ø 25 M8 x 20 Adjuting crew for EUCO Sytem with cylindrical hank diam. Ø 25 M8 x 25 z x x x x x MANCINI utenili
7 DP router bit riccio PUSBRICDRS PUSBRICDS Bit for the boring, haping and quaring of chipboard panel coated with veneer or platic material. Body deigned for the bearing of high tre. Cutting line dipoed on 2 or 3 multiple principle and poitioned o that 2 or 3 cutting edge are alway working. High aphonic degree. High feeding peed, 20 to 25 meter/min., and excellent finihing. eft hand or right hand rotation. 7-8 reharpening. Available alo in MK2 and MK3 verion. Apt to be ued on Working Center: BIESSE, HOMAG, MORBIDEI, SCM and other. z x x x x x x x x Ø x x x x x x x x decription ize Adjuting crew with lock nut for cylindrical hank diam. Ø 20 M6 x 20 Adjuting crew with lock nut for cylindrical hank diam. Ø 25 M8 x 20 Adjuting crew for EUCO Sytem cylindrical hank diam. Ø 25 M8 x x x x x x MANCINI utenili
8 DP router bit riccio, with double rotation PUSBRDSDNS A B Bit for the boring, haping and quaring of chipboard panel coated with veneer or platic material. Body deigned for the bearing of high tre. Cutting line dipoed on 2 or 3 multiple principle and poitioned o that 2 or 3 cutting edge are alway working. High aphonic degree. High feeding peed, 20 to 25 meter/min., and excellent finihing. eft hand and right hand combined rotation. 7-8 reharpening. Apt to be ued on Working Center: BIESSE, HOMAG, MORBIDEI, SCM and other. N N A - upper portion () R.H. rotation lower portion (N).H. rotation B - upper portion ().H. rotation lower portion (N) R.H. rotation Ø Ø decription ize Adjuting crew with lock nut for cylindrical hank diam. Ø 25 M8 x 20 Adjuting crew for EUCO Sytem with cylindrical hank diam. Ø 25 M8 x 25 z x x x x MANCINI utenili
9 DP router bit 1 tooth PUSBCANDRS PUSBCANDS Single cutting edge bit for the boring, haping and quaring of lacquered chipboard panel or coated with veneer or platic material. eft hand or right hand rotation. 2-3 reharpening. Available alo in MK2 and MK3 verion. Apt to be ued on Working Center: BIESSE, HOMAG, MORBIDEI, SCM and other. z o 12x o 12x o 12x o 12x o 12x o 12x o 12x MANCINI utenili
10 DP profiled router bit for CNC working center PUSBPSPDRP PUSBPSPDP Profiled router bit manufactured with variable geometry and number of teeth according to it ue. Ued for the haping and quaring of MDF panel or chipboard panel coated with paper, melamine, platic material and veneer. eft hand or right hand rotation. 7-8 reharpening. Available alo in MK2 and MK3 verion. Apt to be ued on Working Center: BIESSE, HOMAG, MORBIDEI, SCM and other. PEASE NOTE: The Uer i required to end wooden ample of the profile or drawing for the tool manufacturing. z MANCINI utenili
PANEL SIZING SAW BLADES Tungsten Carbide & Diamond
PANEL SIZING SAW BLADES Tungsten Carbide & Diamond LEUCO U-Cut (HW) LEUCO Q-Cut (HW) LEUCO DIA LEUCO DIA topcoat www.leuco.com U-CUT FAMILY, TUNGSTEN-CARBIDE-TIPPED U-CUT: UNIVERSAL-CUT UNIVERSAL CUTS
More informationSR-SAF Ball nose roughing endmill
/ BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.
More informationHERAEUS LABOFUGE 400 AND 400 R GENERAL PURPOSE CENTRIFUGES
HERAEUS LABOFUGE 400 AND 400 R GENERAL PURPOSE CENTRIFUGES Great value and functionality for routine work Quality Product Lifetime Care The Labofuge 400 tabletop centrifuge and the refrigerated verion,
More informationIndustrial Shock Absorbers MC33 to MC64
Indutrial Shock Aborber MC33 to MC64 Self-Compenating Thi range of elf-compenating hock aborber i part of the innovative MAGUM erie from ACE. You profit from the enhanced product life in the mot difficult
More informationLORO-X Downpipes (Art.-No. and dimensions see pages 22-39) LORO-X Sealing elements (Art.-No. and dimensions see page 27)
Application LORO-Standpipe LORO-X Downpipe (Art.-No. and dimenion ee page 22-39) LORO-X Sealing element (Art.-No. and dimenion ee page 27) LORO-X Offet pipe mit Sprung e = 200mm, 130 mm oder 75 mm (Art.-No.
More informationIndustrial Shock Aborbers MA and ML33 to 64
Indutrial Shock Aborber MA and ML33 to 64 Thi adjutable hock aborber from ACE i unique. The innovative MAGUM erie model provide the next generation of deceleration technology to meet the need of the future.
More informationProportional Valves. Additionally, both of these valve types can be supplied with or without an integral amplifier built directly onto the valve.
VICKERS roportional Valve roportional Directional Valve Without Feed ack K(A)D/TGV-5, 3* Serie Typical Section KTGV-5 KAD/TGV-5KAD/TGV-5 A range of proportional directional and throttle valve with control
More informationLinMot Industrial Linear Motors
Linear Motor Electronic nameplate and poition enor Stator winding and temperature enor Slider with neodymium magnet Stacking Loading Load mounting LinMot Indutrial Linear Motor Palletizing Alignment LinMot
More informationComputer Aided Spur Gear Design and Analysis
66 Computer Aided Spur Gear Deign and Analyi Edward M. Vavrek Purdue Univerity North Central I. Introduction Thi paper decribe a pur gear analyi program written in viual baic. The program i ued to ait
More informationIndustrial Shock Absorbers
48 Automation Control Indutrial Shock Aborber Aborber to uit for all load ACE indutrial hock aborber work hard. Their application mean moving load are evenly decelerated over the full troke. The reult:
More informationP ro T ec Series of HMIS & AWD SYSTEMS PAYLOAD. PERFORMANCE. PROTECTION.
P ro T ec Serie of HMIS & AWD SYSTEMS High-Mobility Independent Supenion for Severe Off-Road Application The Iron Triangle of Payload, Performance and Protection, repreenting the three abolute mut-have
More informationHeavy Industrial Shock Absorbers CA2 to CA4
Heavy Indutrial Shock Aborber CA2 to CA4 Self-Compenating 50 The CA2 to CA4 complete the ACE product range of elf-compenating hock aborber. With thee unit ACE ha a continou range of elf-compenating unit
More informationEGU. Technical Data. Pedestrian Low Lift Pallett Truck. Low lift pallet truck with driver s stand-on platform
EGU Technical Data Pedetrian Low Lift Pallett Truck Low lift pallet truck with driver tand-on platform EGU Pedetrian Low Lift Pallett Truck Drive Comfortable, economical and hence cot aving operation thank
More information(12) United States Patent (10) Patent No.: US 6,418,722 B1. Arnold (45) Date of Patent: Jul. 16, 2002
USOO6418722B1 (12) United State Patent (10) Patent o.: Arnold (45) Date of Patent: Jul. 16, 2002 (54) TURBOCHARGER BEARIG SYSTEM 4.322,949 A * 4/1982 Byrne et al.... 60/606 4,420,160 A 12/1983 Laham...
More informationHeavy Industrial Shock Absorbers CA2 to CA4
Heavy Indutrial Shock Aborber CA2 to CA4 Self-Compenating 56 The CA2 to CA4 complete the ACE product range of elf-compenating hock aborber. With thee unit ACE ha a continou range of elf-compenating unit
More informationELECTROMAGNETIC SINGLE-DISC CLUTCHES
ELECTROMAGNETIC SINGLE-DISC CLUTCHES Type EBA & EBK EBA EBK Catalogue No. : V/C/14/01 Optional On Requet 01 02 03 04 05 06 07 Part No Decription 01 Rivet 02 Spring plate 03 Armature plate 04 Friction plate
More informationSawing. Leitz Lexicon Edition 7
Sawing Leitz Lexicon Edition 7 Explanation of abbreviations A a e a p ABM APL APT AL AM AS b B BDD BEM BEZ BH BO CNC = dimension A = cutting thickness (radial) = cutting depth (axial) = dimension = panel
More informationIncreased security with the double flange design. Good wear resistance. Maintenance-free and predictable lifetime. Material: iglidur M250
Eay to fit Increaed ecurity with the double flange deign Good wear reitance Maintenance-free and predictable lifetime Material: iglidur M250 Special dimenion are poible 31.3 iglidur Clip Bearing 1 tyle
More informationWood- and board material. Plastic. Composite. Aluminium. CNC milling tools.
Wood- and board material Plastic Composite Aluminium CNC milling tools INTRODUCTION JHV Tools produce solid shank cutters for working of all materials. JHV Tools has particularly specialized in producing
More informationfore, United States Patent to GS ES (45) Apr. 26, Mr V (11) 4,019,360 shaft and the rolling stand drive shafts are equal in their
United State Patent to Biernot et al. 4 WIRE ROD ROLLING MILL 76) Inventor: Okar Biermot, Enheimer Str. 48; Albert Bier, Am Kloterhang 1, both of St. Ingbert, Germany, 6670 22 Filed: Sept. 22, 197 (21)
More informationIntroducing the World s Most Productive and Profitable Trimmer System
Introducing the World Mot Productive and Profitable Trimmer Sytem From the Maker of the Whizard Trimmer Large Trimmer Model Q750 / Q850 / Q880 Straight Blade Q1000 / Q1300 / Q1400 / Q1500 / Q1850 / Q1880
More informationbrem RADIATORS FOR ARCHITECTURE
brem RADIATORS FOR ARCHITECTURE Brem radiator and towel rail are made uing different ize of teel tube or are tranformed into plate. Welding i carried out by ophiticated automatic ytem the weld are all
More informationIndustrial Shock Absorbers MC33 to MC64
Indutrial Shock Aborber MC33 to MC64 40 Thi range of elf-compenating hock aborber i part of the innovative MAGUM erie from ACE. You profit from the enhanced product life in the mot difficult operating
More information(12) Patent Application Publication (10) Pub. No.: US 2011/ A1
(19) United State US 2011 0005694A1 (12) Patent Application Publication (10) Pub. No.: US 2011/0005694 A1 NG (43) Pub. Date: Jan. 13, 2011 (54) ADJUSTABLE SPRING ASSIST FOR WINDOW (52) U.S. Cl.... 160/311;
More informationFestoon Systems for I-Beams Program
Fetoon Sytem for I-Beam Program 0314 0320 0325 00 2 Content Cable Trolley for Flat Cable Program 0314 4 Fetoon Sytem for Flat Cable... 4 4 Wheel Platic Trolley... 4 3 Wheel Platic Trolley... 5 2 Wheel
More informationAug. 8, 1950 C. TREE 2,517,738 TAPER BORING HEAD Z72O H-2 4% Eazy 8XXX SSNESNS N NS 3. 2 S. V2 A. SE% AS/ N NVENTOR CHARLES TREE
Aug. 8, 1950 C. TREE 2,517,738 TAPER BORIG HEAD Filed May 26, 1947 2 Sheet-Sheet 127.7 Z72O.2 42. 29. H-2 4% Eazy 3 XY) w. XXXX zzz!ii-ii a/ 'w R 8XXX SSESS 43 8XXX SSXXXXXX ) S 32 % S é 3. 2 S. V2 A..
More informationUnderground ball valves JIP for pre-insulation
Data heet Decription Danfo JIP underground ball valve are deigned for ditrict heating ytem and other cloed loop water ytem where the water i treated to avoid internal corroion. aving a fully welded body,
More informationmax. 1, Ø Plate Kerf Bore Z Hook Ground
11 Multi-rip Saw Blade With Raker 0 0 Ø Plate Kerf Bore Z Z Hook Ground Excellent blade with special rakers for ripping cuts in solid wood, dry or wet. The carbide rakers protect the saw body to guarantee
More informationView thousands of Crane Specifications on FreeCraneSpecs.com QY50C TRUCK CRANE. 50t Lifting Capacity
View thouand of Crane Specification on FreeCraneSpec.co 5t Lifting Capacity View thouand of Crane Specification on FreeCraneSpec.co 1 2 55t 42.5 42.8 1. Max. rated lifting capacity 55t. Min. working radiu.
More informationWorking pressure; connection PS1-E101
PDE2600PNUK Interface - PS1 Serie (IGH SPEED POPPET TYPE SOLENOID VALVES WITH INDIVIDUAL ELECTRICAL CONNECTIONS,IGHT WEIGHT PLASTIC BODIES WITH $). RAIL MANIFOLD )DEAL FOR cabinet intallation. (IGH SPEED
More informationSAWBLADES SPINDLE TOOLING
EICATE WEBSITE Trend have created a website for our range of industrial tooling especially for the manufacturing industry. This website offers full product details on our Sawblades, Spindle Tooling, rilling
More informationSIVACON The Versatile Low-Voltage Switchboard
Control & Ditribution Ditribution Board & Motor Control Center SIVACON The Veratile Low-Voltage Switchboard SIVACON A&D CD DM PM, 1004 Power Ditribution Board 1 Control & Ditribution Ditribution Board
More informationDouble flank gear roll inspection machines. The simple functional inspection
Double flank gear roll inpection machine The imple functional inpection URM-WZ E 11 2013 General Information The baic principle of the double flank gear roll inpection i that a mater gear (nearly perfect
More informationCustom Exhibits - Champion Exhibits
Cutom Exhibit - Champion Exhibit Champion Exhibit i here to erve you. Think of our team a your peronal all thing tradehow reource! From modular ytem to cutom contruction, Champion Exhibit i geared-up to
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 437 Safety Relief Valve pring loaded Metric + US Unit Fact The-Safety-Valve.com Deign 40 Cap H2 18 Adjuting crew with buhing 19 Lock nut 16 Spring plate 12 Spindle 54 Spring Axial needle 69 beering
More informationEFFICIENCY PERFECTED. DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5. Feed force [N] Feed speed [m/s]
EFFICIENCY PERFECTED DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5 2000 TEETH RATIO i = 5 Feed force [N] 0000 8000 6000 4000 DE-DG5 m4 DE-DG5 m DE-DG90 m DE-DG90 m2 DE-DG75
More informationSPROCKETS AND PLATEWHEELS DESIGNED FOR ROLLER CHAINS
AND DEIGNED FOR ROLLER The range of sprockets and wheels designed for chains manufactured by our Company provides an all-round solution to the needs of industry in the sector of flexible mechanical transmissions
More informationROTARY INDEXING TABLES WITH FACE GEAR FIBROTAKT
WE LOVE TECHOLOGY ROTARY IDEXIG TABLES WITH FACE GEAR ROTOCUTTIG ROTARY TABLES FOR MACHIE TOOLS POSITIVE LOCKIG thank to face gear MAXIMUM PRECISIO... AD MAXIMUM PROCESS RELIABILITY. THE PIOEER Particularly
More informationSIZES FROM 1, ,000 NM CROWNED GEAR COUPLINGS
BZ SIZES FROM 1,300-348,000 NM CROWNED GEAR COUPLINGS GENERAL INFORMATION ABOUT R+W CROWNED GEAR COUPLINGS: CROWNED GEAR COUPLINGS BZ FIT CLEARANCE Overall shaft / hub clearance of 0.01-0.05 mm TEMPERATURE
More informationDrill and Boring Bits, Adapters
800-544-8436 www.guhdo.com rill and Boring Bits, Adapters Hinge Boring Bit T.C. Z2+V2 30103 25 65 8 30103-5-02500-R 30 65 8 30103-5-03000-R 35 65 8 30103-5-03500-R Two raker teeth, centre point and two
More informationINDUSTRIAL ROUTING CUTTING TOOLS
CUTTING TOOLS Technical Information UpCut, DownCut, Compression. What are the pros and cons of each of these chip flow styles? Below highlights some of the key considerations that should be taken into
More informationHygiene Right Angle Control Valve 6020
N 15 up to N 4 with integrate igital poitioner for application in foo proceing (Type 847, 849) Pneumatic control valve with right angle boy eign an integrate poitioner for application in foo proceing an
More informationITR ELEVATING SCRAPER PARTS
ITR ELEVATING SCRAPER PARTS Make Caterpillar Series & Model 613 / 613B Remarks 1 Chain 9J0115 2 2 Flight Bolt 0S1603 128 2A Flight Nut 6B6684 128 2B Flight Washer 5P8245 128 3 Sprocket 9J1653 2 4 Sprocket
More informationWorld Leader In Variable Speed Motor Products
World Leader In Variable Speed Motor Product Baldor offer the widet, mot comprehenive product line of motor deigned pecifically for variable peed control. More product and more capability than any other
More informationMetallic trip Standard thickne of the metallic trip i 0.2 mm (0.18). MATERIALS FOR METALLIC STRIP ASTM DIN Material No. AISI AISI 316, 316
MS 10 PROPERTIES AND APPLICATION Spiral wound gaket are pecial emi-metallic gaket of great reilience, there fore they are very uitable for application featuring heavy operating condition. Spiral wound
More information3.2 Steer Design. A. Concept Development & Selection Process. B. Configuration Summary
3. Steer Deign A. Concept Development & Selection Proce The teering ytem for the RP1 motor module ha undergone ignificant deign improvement. The team elected to move forward with a timing belt drive ytem
More informationJUNIOR-6 A FULL RANGE OF CAREFULLY ASSEMBLED DOORS FURNITURE FITTINGS FOR SUPPORTED SLIDING DOORS. FOR MADE-TO-MEASURE WARDROBES, INCLUDING,
FURNITURE MANUFACTURER A FULL RANGE OF CAREFULLY ASSEMBLED FOR MADE-TO-MEASURE WARDROBES, INCLUDING, TWO RUNNERS SYSTEMS; A CLASSIC VERSION INCORPORATING A SOFT STOP SYSTEM FOR THE DOOR AT THE END OF ITS
More informationSPRING/ SUMMER Promotion ~ 2015 ~
SPRING/ SUMMER Promotion ~ 2015 ~ We are proud to be een and continue to upport the Farming and aociated indutrie with FREE DELIVERY, NO MINIMUM ORDER AND CONSISTENTLY HELD PRICES. FREE DELIVERY and no
More informationSawing. Leitz Lexicon Edition 7
Sawing Leitz Lexicon Edition 7 Explanation of abbreviations A a e a p ABM APL APT AL AM AS b B BDD BEM BEZ BH BO CNC = dimension A = cutting thickness (radial) = cutting depth (axial) = dimension = panel
More informationSTAMA PRODUCT CATALOGUE
UK STAMA PRODUCT CATALOGUE STAMA The STAMA range of product include Leaf Collector MK8, Micro EL, Parker EL, Mini EL, Multi EL, Evo EL and Mai EL. A we wih to protect the environment, STAMA truck are built
More informationThree-Phase Induction Motor Preliminar Design Assisted by CAD Software based on Brazilian Standards
Three-Phae Induction Motor Preliminar Deign Aited by CAD Software baed on Brazilian Standard Victor de Paula Brandão Aguiar 2, Ricardo Silva Thé Ponte, Tobia Rafael Fernande Neto Department of Electrical
More informationCarbide Burs - Double Cut - Aluminium Cut - Comprehensive range of shapes to suit your application - Standard & extra length available - Sets &
CARBIDE BUR Carbide Burs - - Aluminium Cut - Comprehensive range of shapes to suit your application - tandard & extra length available - ets & merchandisers Carbide Burs Finder IO VDI aterial Group utton
More information385C L Hydraulic Excavator
8C L Hydraulic Excavator Engine Engine Model Net Flywheel Power Weight Operating Weight Long Undercarriage Caterpillar C18 ATAAC 82 kw 1 hp 8 980 Drive Maximum Travel Speed Maximum Drawbar Pull Long Undercarriage.
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More informationAssembly Diagram. No. Item Description Qty.
RESEARCH&DEVELOPMENT OF AMERICA, INC. 0 DANIELS STREET STE A, CHINO CA., 70 (800)6-66 (0)68-7 FACSIMILE (0)-8 www.yohimura-rd.com Yamaha FJR00 0E00 (CF) 0E00 (SS) R77 Slip-On Exhaut Sytem Thi product i
More informationSEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance
Product News No.492 Grooving / Cut-off Tools EC-Grooving Tool s 12-017 (GND型) -7$ (&2 352'8&7 ష෭ Ӥ أܞ ܞ Ӕ -7$ գ ଳཋ ട (GNDI型) table Machining through Outstanding Chip Control and Chattering Resistance Performance
More informationWorld Leader In Variable Speed Motor Products
World Leader In Variable Speed Motor Product Baldor offer the widet, mot comprehenive product line of motor deigned pecifically for variable peed control. More product and more capability than any other
More informationQUICK-ACTING JAW CHANGE SYSTEM
QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire
More informationPRECISION AT A GLANCE: CONTENTS. Company 3-6. Sawing Hogging Edge banding Jointing Profiling
PRECISION AT A GLANCE: CONTENTS. Company 3-6 Sawing 7-38 Hogging 39-48 Edge banding 49-58 Jointing 59-64 Profiling 65-76 Drilling 77-92 Routing 93-112 Clamping systems 113-126 Peripheral products 127-132
More informationWorld Leader In Variable Speed Motor Products
World Leader In Variable Speed Motor Product Baldor offer the widet, mot comprehenive product line of motor deigned pecifically for variable peed control. More product and more capability than any other
More informationWorld Leader In Variable Speed Motor Products
World Leader In Variable Speed Motor Product Baldor offer the widet, mot comprehenive product line of motor deigned pecifically for variable peed control. More product and more capability than any other
More informationCHE302 LECTURE III ACTUATOR AND CONTROL VALVE SELECTION. Professor Dae Ryook Yang INTRODUCTION TO ACTUATOR
CHE30 LECTURE III ACTUATOR AND CONTROL VALVE SELECTION Profeor Dae Ryook Yang Fall 001 Dept. of Chemical and Biological Engineering Korea Univerity CHE30 Proce Dynamic and Control Korea Univerity 3-1 INTRODUCTION
More informationRemote Lighting Heads. EVO Series EVR. Architectural LED Emergency Light. Outdoor LED Remote FEATURES. ordering guide FEATURES.
Remote Lighting Head EVR Architectural LED Emergency Light The EVR LED remote offer compact architectural deign which matche the EV LED unit in ize and performance. The ue of a EVR2 remote double the multiple
More informationQY25C TRUCK CRANE. 25t Lifting Capacity
25t Lifting Capacity 01 02 25t.5 0% Max. rated lifting capacity: 25t. Min. working radiu:.0. Full extenion of ain boo.5m, hexagonal profile, ade of HG 785 and HG 70 high tenile tructure teel plate. Dongfeng
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More information(12) United States Patent
(12) United State Patent Overholt et al. USOO6398.054B1 (10) Patent No.: (45) Date of Patent: US 6,398,054 B1 Jun. 4, 2002 (54) COLLAPSIBLE CONTAINER (75) Inventor: Trenton M. Overholt, Manhattan Beach,
More informationtough. Live Centers Face Drivers 2013/2014
tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers
More informationAnalysis of Overloading Prevention System in Trucks
e t International Journal on Emerging Technologie (Special Iue on NCRIET-2015) 6(2): 224-228(2015) ISSN No (Print) : 0975-8364 ISSN No (Online) : 2249-3255 Analyi of Overloading Prevention Sytem in Truck
More informationINSTRUCTIONS S&C Switch Operators Type AS-10 INSTRUCTION SHEET. For Installation TABLE OF CONTENTS INTRODUCTION.
S&C Switch Operator Type AS-10 INSTRUCTIONS For Intallation TABLE OF CONTENTS Section Page Number INTRODUCTION....................................... 1 SAFETY INFORMATION Undertanding Safety-Alert Meage.....................
More informationDOUBLE GIMBAL EXPANSION JOINTS
DOUE GIM EXPNSION JOINS Scan thi QR 64 NSI DIN EN +600 C Gimbal type expanion joint are deigned to permit angular rotation in any plane by the ue of two pair of hinge affixed to a common floating gimbal
More informationPressostat P/PS 900/904/912. Applications. Features
Preotat Swi baed Trafag i a leading international upplier of high quality enor and monitoring intrument for meaurement of preure and temperature. Application Shipbuilding Engine manufacturing Railway Machine
More informationClamping technology. MAPAL Floating holder. for multi-bladed high performance reamers NEW
Clamping technology MAPAL Floating holder for multi-bladed high performance reamers NEW 2 Floating holder for MAPAL multi-cutting reamers When using reamers on lathes it is often necessary to compensate
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 438 Safety Relief Valve pring loaded Metric + US Unit Fact The-Safety-Valve.com Deign 40 Cap H2 18 Adjuting crew with buhing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring
More informationRotrex TM E-charger. Technical Datasheet. Prototype Status v1.5 (June 2015) updates and changes:
Rotrex TM E-charger Technical Dataheet Page 1 of 7 Prototype Statu v1. (June 201) update and change: NEW IP67/IP6 mobile inverter available in the 60A range (~40kW @ 60VDC), with bigger power range to
More informationTri-Style 1600 Series Non Handed Door Closer
CAUTION Trityle 100 eries Non Handed Do Closer CAUTION 809312502020 (1202) An Increctly installed improperly adjusted do closer can cause property damage personal injury. These installation instructions
More informationContents 3 The clever connection 4 The OK coupling explained 6 OKC OKC OKC OKC OKC OKF
OK haft coupling 2 Content 3 The clever connection 4 The OK coupling explained 6 OKC 100-190 7 OKC 200-400 8 OKC 410-490 8 OKC 500-520 9 OKC 530-1000 10 OKF 100-300 11 OKF 310-700 12 OKCS 178-360 13 OKTC
More informationPASS-WORD DANTE BONUCCELLI 2014
PASS-WORD 1 Thanks to the addition of new versatile features, Pass-Word redefines and enhances its modularity. Finished compositions range from 96 cm to 442 cm for more than 90 different solutions. This
More informationLicence to cure. LED for every use. bluephase C8. bluephase style. bluephase 20i 2,000 mw/cm 2
bluephae Licence to cure LED for every ue bluephae C8 bluephae tyle bluephae i 8 mw/cm 1,1 mw/cm, mw/cm NEW bluephae with the licence to cure True innovation prove itelf in ue. A perfect example of thi
More informationMcDonald (45) Date of Patent: Oct. 7, (54) LITHIUM ION BATTERY COOLING SYSTEM (56) References Cited
(12) United tate Patent U008852772B2 (10) Patent No.: U 8,852,772 B2 McDonald (45) Date of Patent: Oct. 7, 2014 (54) LITHIUM ION BATTERY COOLING YTEM (56) Reference Cited COMPRIING DELECTRICFLUID U.. PATENT
More informationPPN Piping System. Cost Effective Purity
PPN Piping Sytem Cot Effective Purity 45 - Specification PolyPure Natural Polypropylene (PPn) High Purity Piping Sytem REV:HP0512PN Material: ASTM D4101 Group 2, Cla 1 natural polypropylene random copolymer
More informationLIFTING AND LASHING POINT COLLECTION for lifting, pulling and transport
LIFTING AND LASHING POINT COLLECTION for lifting, pulling and tranport Edition 17 RUD mean Quality.for more than 130 year! The paion of chain manufacturing! The round teel chain link production in Unterkochen
More informationigus slewing ring bearings
PRT... igus slewing ring bearings plastics for longer life... igus.com/prt... IG-B12 iglide PRT - Table of Contents Maintenance free slewing ring bearing Type 01: High rigidity from page 5 Type 01 with
More informationHighly flexible GKN Stromag Periflex VN
Product Catalog Coupling Highly flexible GKN Stromag Periflex VN dic coupling GKN Stromag Periflex VN dic coupling Serie overview: GKN Stromag Periflex dic coupling > Periflex VN / -VP...G erie Nominal
More informationParts. Cyclo BBB5 Reducer. Cyclo BBB5. 34 Operation & Maintenance Manual Cyclo BBB5. Figure 31. Cyclo BBB5 Reducer Parts
Parts Reducer Figure 31. Reducer Parts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 24 23 21 19 18 17 16 22 20 Table 30. Reducer Parts Number escription 1 BBB5 Assembly 2 Ring Housing Pins 3 Ring Housing Rollers
More informationBlum Hinges Opening / Full Overlay. 107 Opening / Full Inset. 107 Opening / Half Overlay. 110 Opening / Full Overlay
Blum Hinge 107 Opening / Full Overlay Inerta 107 Full Overlay 107 Full Overlay 107 Full Overlay Inerta Blum_H_75T1550 Blum_H_75T1580 BLum_H_75T1590B 250 250 Inerta 250 107 Opening / Half Overlay 107 Opening
More informationStandard programme. Multi-bladed reamers and counterboring tools. The tool specialists for the trade.
Standard programme Multi-bladed reamers and counterboring tools The tool specialists for the trade. 2 STANDARD PROGRAMME Introduction Welcome to the world of precision! Founded in 1906 by August Beck as
More informationCLS Series. Compact Linear motor Stage. Patent pending CLS-01-O81-EN
CLS Serie Compact Linear motor Stage cpc reerve the right to revie any information(technical detail) any time without notice, for printing mitake or any other incidental mitake. We take no reponibility.
More informationRACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
More informationSIGNATURE SERIES. Qualified Manufacturer Declared Replacement Part
SIGNATURE SERIES Qualified Manufacturer Declared Replacement Part APPLICATION YEAR MODEL 206 Honda CB500X PRODUCT 256E0220 256E0520 R77 SS Slip-On Exhaut with Carbon Fiber Sleeve; Carbon Fiber Endcap R77
More informationB O O M E R A N G o p e r a t i o n a l s e r i e s
BOOMERANG 10.01.2017 o p e r a t i o n a l s e r i e s 4 5 boomerang apple / white / grey BMR 01 / Table / L 225 cm. / D 188 cm. H 75 cm. BMR 03 / Bookcase / L 210 cm. / D 41 cm. H 131 cm. BMR 04 / Coffeetable
More informationDESIGN BY HOWE 1974 / KOMPLOT DESIGN 2002 / 2009
DESIGN BY HOWE 1974 / KOMPLOT DESIGN 2002 / 2009 WWW.HOWE.COM/TEMPEST TEMPEST Tempest is the original space-saving flip-top table system for use in multi-purpose eating, meeting, training and conferencing
More informationTJD-01. number 10 25PL 12 25PL 8 12PL a p (mm) 16/ 18 35PL
Sank cutters wit (IA) tips 159 TJ-01 Catalogue = = = = z IA TJ01.010A 8 66 1 TJ01.028A 10 66 1 TJ01.029A 10 71 1 4, 4, 4, Catalogue = = = = z IA TJ01.010A 8 66 1 TJ01.028A 10 66 1 TJ01.029A 10 71 1 rice
More information(12) United States Patent (10) Patent No.: US 8,308,044 B2. Viola (45) Date of Patent: Nov. 13, 2012
USOO83 0804.4B2 (12) United State Patent (10) Patent No.: Viola (45) Date of Patent: Nov. 13, 2012 (54) FLEXIBLE ENDOLUMINAL SURGICAL 4,499,895 A 2/1985 Takayama INSTRUMENT 4,576,167 A 3, 1986 Noile 4,589.412
More informationDep. Arquitectura de Computadores y Automática Universidad Complutense de Madrid Av. Complutense S/N, Madrid, Spain SPAIN
Modelling and imulation of the fuel tranfer for CoG poition control in an Aircraft J. M. GIRON-SIERRA., J.F. JIMENEZ, C. C. INSAURRALDE, M. A. SEMINARIO, B. HIGHAM (), R. A. MELVILLE () Dep. Arquitectura
More informationIndividual and Global Optimization of Switched Flux Permanent Magnet Motors
3 Journal of International Conference on Electrical Machine and Sytem, Vol., No., pp.3~39, Individual and Optimization of Switched Flux Permanent Magnet Motor Z.Q. Zhu *, X. Liu ** Abtract With the aid
More informationDoor Hinges Concealed Hinges
Concealed mortise hinge For installation in wall recesses For flush wooden or metal doors Suitable for DIN left hand and DIN right hand Certified for fire resistant and smoke control doors in compliance
More informationAXIAL PISTON PUMPS V SERIES V 23 - V 25 Series Axial Piston Pump Installation drawings
V 23 - V 25 Series Axial Piston Pump Installation drawings V 23 FG - V 25 FG Dual Pressure & Flow Control by Solenoid Operated & Remote Valve V 23 G - V 25 G Remote Pressure Compensator Control V 23 GJ
More informationRETAIL PRICES FOR CIRCULAR COLD SAWS SEPTEMBER 1, 2018 PRICE LIST
RETAIL PRICES FOR CIRCULAR COLD SAWS RETAIL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. All Prices Are F.O.B. Philip, South Dakota. Minimum Order $25.00 (Net). SCOTCHMAN INDUSTRIES, INC. 180 EAST HWY.
More informationQuindos the Ultimate Software package for Gears, Gear Tools and other Special Applications
Quindos the Ultimate Software package for Gears, Gear Tools and other Special Applications Quindos gear packages Gearings Cylindrical Gear Unknown Gear Involute & Lead Master Straight Bevel Gear Spiral
More informationiglidur PRT polymer slewing ring bearings
polymer slewing ring bearings Completely maintenance-free Easy to install and replaceable sliding pads High wear resistance For very high loads and high stiffness Stainless steel versions available Extensive
More information