Check Valve, Model : RHD/RHZ/RHV/RHF
|
|
|
- William Watts
- 5 years ago
- Views:
Transcription
1 heck Valve, Model : RH/RHZ/RHV/RHF Ref. No : H8 Release Jan (imensions in mm) escription Poppet type valves. Allows free flow from port A to and offer leakage free closure in opposite direction. Four basic models : RH, RHZ, RHV and RHF Seven standard sizes : N, N 8, N 1, N 15, N, N 5, N 3 Four cracking pressure :.5, 1.5, 3 and 5 bar. RH RHZ RHV RHF Section A A Hydraulic Symbol Technical Specifications HYRO PNEUMATI AESSORIES onstruction Poppet type Mounting style In line Mounting position Optional racking pressure available.5, 1.5, 3, and 5 bar ode for cracking pressure options Omit,,, and respectively. Flow direction Operating pressure From port `A' to port `'. 315 bar. Hydraulic medium Mineral oil. Viscosity range 1 cst to 38 cst. Fluid temperature range - o to +7 o. Fluid cleanliness requirement As per ISO 19/1 or better. Maximum flow handling capacity Refer graph. opyrights hyloc hydrotechnic pvt. ltd. All rights reserved Engineering atasheet, Page 1/
2 heck Valve, Model : RH/RHZ/RHV/RHF Ref. No : H8 Release Jan (imensions in mm) Expected performance urves Oil used : ISO V 8, Viscosity : 8 o N- N-8.5 bar.5 bar bar N-1.5 bar N HYRO PNEUMATI AESSORIES N- N-5.5 bar.5 bar N-3.5 bar opyrights hyloc hydrotechnic pvt. ltd. All rights reserved Engineering atasheet, Page /
3 heck Valve, Model : RH/RHZ/RHV/RHF Ref. No : H8 Release Jan (imensions in mm) RH connection as per IN 353 at both ends S1 S S3 o.d l 1 ~ L 1 Table 1 Ordering ode Size od S1 S S3 L1 l1 RHPL-. N- - L RH8PL L RHPS-. - S RH8PS S RH1PL-. N L RH1PS S RH1PS S HYRO PNEUMATI AESSORIES RH1PL-. N L RH15PL L RH1PS S RH1PS S RH18PL-. N L RHPS-. - S RHPL-. N- - L RH5PS S RH8PL-. N L RH3PS S RH35PL-. N L RHPL-. - L RH38PS S opyrights hyloc hydrotechnic pvt. ltd. All rights reserved Engineering atasheet, Page 3/
4 heck Valve, Model : RH/RHZ/RHV/RHF Ref. No : H8 Release Jan (imensions in mm) RHZ connections (IN353) at inlet SP Male stud (E) at outlet S3 S1 S o.d Ød7 l i ~ L Table Ordering ode Size od S1 S S3 L l i Ød7 RHZPLE-. N- - L /8 1 RHZ8PLE L / 19 RHZPSE-. - S / 19 RHZ8PSE S / 19 RHZ1PLE-. N L / 19 RHZ1PSE S /8 RHZ1PSE S /8 HYRO PNEUMATI AESSORIES RHZ1PLE-. N L /8 RHZ15PLE L / 7 RHZ1PSE S / 7 RHZ1PSE S / 7 RHZ18PLE-. N L / 7 RHZPSE-. - S / 3 RHZPLE-. N- - L / 3 RHZ5PSE S RHZ8PLE-. N L RHZ3PSE S / 5 RHZ35PLE-. N L / 5 RHZPLE-. - L / 55 RHZ38PSE S / 55 opyrights hyloc hydrotechnic pvt. ltd. All rights reserved Engineering atasheet, Page /
5 heck Valve, Model : RH/RHZ/RHV/RHF Ref. No : H8 Release Jan (imensions in mm) RHV SP Male stud (E) at inlet connections (IN353) at outlet S1 S S3 Ød7 o.d i l ~L Table 3 Ordering ode Size od S1 S S3 L l i Ød7 RHVPLE-. N- - L /8 1 RHV8PLE L / 19 RHVPSE-. - S / 19 RHV8PSE S / 19 RHV1PLE-. N L / 19 RHV1PSE S /8 RHV1PSE S /8 HYRO PNEUMATI AESSORIES RHV1PLE-. N L /8 RHV15PLE L / 7 RHV1PSE S / 7 RHV1PSE S / 7 RHV18PLE-. N L / 7 RHVPSE-. - S / 3 RHVPLE-. N- - L / 3 RHV5PSE S RHV8PLE-. N L RHV3PSE S / 5 RHV35PLE-. N L / 5 RHVPLE-. - L / 55 RHV38PSE S / 55 opyrights hyloc hydrotechnic pvt. ltd. All rights reserved Engineering atasheet, Page 5/
6 heck Valve, Model : RH/RHZ/RHV/RHF Ref. No : H8 Release Jan (imensions in mm) RHF SP Ports at inlet and at outlet S1 S T1 T1 L 1 Table Ordering ode S1 S T1 L1 RHF-. 1/ 1 58 RHF3-. 3/ RHF-. 1/ RHF-. 3/ RHF RHF / 55 1 RHF / Ordering ode Type of heck Valve RH RHZ RHV RHF Size (for RH/RHZ/RHV) Refer Table 1 to Table 3 Port Size (for RHF) Refer Table End connection type (For RH/RHZ/RHV) With Ferrule - P Pressure Series (Refer Table 1 to Table 3) Low Pressure - L High Pressure - S RHZ 1 P S E. HYRO PNEUMATI AESSORIES esign Series Subject to revision Surface Treatment Omit Zinc plated and Yellow cromated P Phosphated ody Material Omit Steel 3 SS-3 31 SS-31 Seal Material Omit Nitrile 9º V Viton 9º X Without seal racking Pressure Omit.5 bar 1.5 bar 3. bar 5. bar End onnection (For RHZ/RHV) (Refer Table and Table 3) Type of Sealing (For RHZ/RHV) E - Elastomeric Seal opyrights hyloc hydrotechnic pvt. ltd. All rights reserved Engineering atasheet, Page /
Check Valve, Model : RHD/RHZ/RHV/RHF
escription Poppet type valves. Allows free flow from port A to and offer leakage free closure in opposite direction. Four basic models : RH, RHZ, RHV and RHF Seven standard sizes : N, N 8, N 1, N 15, N,
Pilot Operated Check Valves
Pilot Operated heck Valves Nomenclature IS graphic symbols for hydraulic system L eatures - P - - - - pplicable fluid code No designation: Petroleum-based hydraulic fluid, waterglycol hydraulic fluid :
3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = 4 l/min ( gpm), p max = 5 bar (45 psi) Bidirectional seat-valve shut-off, direct acting Series W.B, WF.B Guided valve spool and poppet Two spool variants are
Check Valves, Size Spherical Poppet-type, Screw-in Design Series RKVE l/min, 350 bar (500 bar)
Check Valves, Size 04... 40 Spherical Poppet-type, Screw-in Design Series RKVE... 360 l/min, 350 bar (500 bar) 1 General 1.1 Product description Series RKVE units are screw-in check valves with mounting
Check Type Prefill & Exhaust Valves
Check Type Prefill & Exhaust Valves Bulletin 86620 Table of Contents Performance Assurance page 3 PV Valves Features and Benefits 4-5 Specifications 6-7 Dimensions & Weights 8-12 Performance Curves 13-14
Pressure Control Valves
efore using the product, please check the Pressure ontrol Valves JIS graphic symbols for hydraulic system Refer to the next page. Features These direct operated control valves can be used as sequence valves,
FLOW CONTROL VALVES A5-1 PN# / / ACC
FLOW CONTROL VLVES Flow Control Valves The HYDC family of flow control valves permit safe, simple and repeatable control of hydraulic fluids at operating pressures to psi. The standard slotted control
Feed Pumps FZP / MFZP
eed Pumps ZP / MZP Symbol General The feed pump from the ZP series is a vane pump for the low-pressure range with constant flow rate. Product eatures l irect drive pump no bell housing or coupling required
Service Data Vickers. Directional Controls. Pilot Operated Directional Control Valves DG5S4-10**-*-*-53 I-3624-S. Revised 9/1/86
Service Data Vickers Directional Controls Pilot Operated Directional Control Valves DG5S4-10**-*-*-53 Revised 9/1/86 I-3624-S Installation Table A DG5S4-10**-53 Does DG5S4-10**-E-53 Not DG5S4-10**-X-53
Flow Control Valves. Overview. Accessories Catalog. Needle Valves. Flow Control Valves. Pressure Compensated Flow Control Valves.
Overview Needle Valves DV, DVE & DVP Series (see page ) Flow Control Valves DRV & DRVP Series (see page ) Pressure Compensated Flow Control Valves SRVR Series (see page ) Check Valves RV & RVP Series (see
DIRECT ACTING PRESSURE RELIEF VALVE Model : DPR
A olyhydron Group Company Description DIREC ACING RESSURE RELIEF VALVE Model : DR of 6 Ref. No. Release 05 / 24 Direct acting valve. Guided poppet design. Cushion arrangement for greater stability and
Proportional Flow-Control Cartridges, Size 5
Proportional Flow-Control Cartridges, Size Q max = l/min, p max = bar, Q N = l/min at p bar Leak free, load compensated, two stage Description Series MVRPLSA two-stage proportional flow-control cartridges
Housings and miscellaneous parts
Hydraulic Screw-in artridge Valves (SiV) Housings and miscellaneous parts Standard and special valve housings, orifice disks, orifice sizing charts, pilot pistons, adapters, adjustment kits and seal kits
3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
Directional Control Valves
Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers
Check valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Check valves Direct and pilot operated check valve functions for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Check valves CHECK VALVES... -4 FPR -
The Complete Range of Fluid Power Products
The omplete Range of Fluid Power Products lectropneumatics & Hydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and Hydraulics (I) Pvt. Ltd.
Pressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
2/2 Solenoid Cartridge Valve, Size 10
2/2 Solenoid Cartridge Valve, Size 1 Q max = 8 l/min, p max = 3 bar Seat-valve shut-off, two-stage, monitored operating position 1 Description With integral electronic monitoring of operating position
Throttle and throttle check valve
Throttle and throttle check valve RE 79/0.09 Replaces: 0.06 /6 Types MG and MK Size 6 to 0 Component series X Maximum operating pressure 5 bar Maximum flow 400 l/min K564- Table of contents Contents Page
SV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)
SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow
2010B. Available Materials Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
OVER EQUIPMENT VRE 0 / 00 Series PRESSURE N VUUM RELIEF VLVE The 0/00 protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation.
CVH103P. Check Valve Series CVH103P. Technical Information. General Description
Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H13P Spherical poppet for low leakage D -Ring eliminates back-up rings Dual sense paths
RHD/V/Z non return valve
RHD/V/Z non return valve Design with sealing edge: Size 06L and 08L / 06S and 08S and all sizes in stainless steel with a PTFDE sealing disc. Design with O-ring (item. 7): Sizes L, 2L, 5L, 8L, 22L, 28L,
2/2 Cartridge Seat Valve, Size 5
/ Cartridge Seat Valve, Size Q max = l/min, p max = bar Digital valve, bidirectional seat-valve shut-off, direct acting Series WSGD / WSOD For use in digital hydraulics With bidirectional seat-valve shut-off
DRV2-080 Adjustable, Direct-Acting Relief Valve
SOLENOID DRV2-080 Adjustable, Direct-Acting Relief Valve SERIES 8 CHECK MOTION FLOW USASI / ISO ➁ ➀ DESCRIPTION An adjustable, direct-acting poppet cartridge valve designed to limit pressure in hydraulic
PILOT OPERATED PRESSURE CONTROLS - FLANGED TYPE VR5 Series
PILOT OPERTED PRESSURE CONTROLS FLNGED TPE VR5 Series Veljan Flanged type, Valves Series VR5V ( Relief ), VR5U (Unloader) and VR5S (Sequence ) are pilot controls. These range of valves are suitable for
Min. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min.
Flow Control These are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (Viscosity of the fluid). They
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi)
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi) Revised 2/93 GB C 2037 Table of Contents Model Code...................................................................................................
DIRECT ACTING PRESSURE RELIEF VALVE DPR
DIREC ACING RESSURE RELIEF VALVE DR Ref. No. 4896 Release 2/25 Description Direct acting valve. Guided poppet design. Cushion arrangement for greater stability and noise control. hree sizes. - 6, and 2.
Pressure Control Valves
Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal
Odor Removal Filter. Model. Note) 1 8, , , , 3 4. Model/Free Standing Type AMF (2B)JIS 10K FF flange
fficiently can remove odor in compressed air with an activated carbon element. The unit is designed for use in the area such as a clean room where odors must be avoided. an remove odor and gas ingredients
PVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS
PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)
* Optional PRESSURE COMPENSATOR - FLANGED TYPE B A X 2.2. Typical application VR5P with flow control valve
* Veljan 3 ports pressure compensator Valve are designed for improved operation safety and reduced mountg cost. These valves are used to mata a constant pressure drop External PD, External PP Internal
BULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
ULLETIN 46.00-2 SEPTEMER 2009 OS OFFSET IS RESILIENT- SETE UTTERFLY VLVES TEHNIL SPEIFITIONS Materials of onstruction 2 s (50-) 8 9 7 Wafer and Lugged esign 10 3 Wafer ody Lugged ody 6 5 4 1 2 2 s (50-)
CALEFFI. Motorised ball valve for central heating systems. 638 series 01196/18 GB. replaces dp 01196/12 GB
Motorised ball valve for central heating systems 638 series M 21654 003 LI 01196/18 G replaces dp 01196/12 G unction Motorised ball valves allows both automatic shut-off and diversion of the thermal medium
The Complete Range of Fluid Power Products
The omplete Range of Fluid Power Products lectropneumatics & ydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and ydraulics (I) Pvt. Ltd.
Cartridge Valves Technical Information Directional Valves DCV 03
OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves
PRESSURE SWITCH 1PS / 1PF / 1PT
RESSURE SWICH 1S / 1F / 1 Ref. No. 98 Release 7/2 1 Non adjustable differential type. Spring loaded sealed piston construction. Encapsulated design for protection against dust. Six pressure ranges available,
Directional Control Valves
Directional Control Valves Operating pressure: Flow rate: 3-chamber, electrically controlled 4/3- or 4/2-way directional control valve. Direct-activated by solenoids with screwed-in wet pin armature. Standard
Instrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
2/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min (.3 gpm), p max = 3 bar (4 psi) Bidirectional leak-proof shutoff, direct acting, with EX-safty solenoid coil Description Valve: Bidirectional leak-proof
RA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)
R 26 892/06.98 Pressure Reducing Valve, Pilot Operated Model DR (Series 5) Size 10 to 0... 5000 PSI (50 bar)... 105 GPM (400 L/min) R 26 892/06.98 Replaces: 05.94 Pilot operated pressure reducing valve
KTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids
KTM Three-Way Floating all Valves -seats (L-port) and 4-seats (L&T-port) KTM single KTM 3-way ball valve replaces several -way saving valuable space and simplifying piping Features Positive alignment of
966SRL 966SBL Nominal size A B C D Weight Red Lever Blue Lever in mm mm mm mm kg Product Code Product Code
D rass Full ore FIG 966SRL and 966SL WRS Valves Lockable lever as standard 966SRL 966SL Nominal size D Weight Red lue in mm mm mm mm kg Product ode Product ode 4 4.4 44.7 90 8 0.7 784204 78408 8 45.4 47.8
INTRODUCTION XV-0P XV-1P XV-2P XV-3P. Summary: Displacements - Pressures - Speeds XV-0P XV-1P XV-2P XV-3P
TROUTION XV-0P XV-1P XV-2P Summary: isplacements - Pressures - Speeds XV-2P XV-1P XV-0P Type isplacement Max. Pressure Min speed Max speed XV-0P/0.17 0.16 cm 3 /rev 260 bar 700 rpm 9000 rpm XV-0P/0.25
Throttle Modules / Throttle and Check Modules
FLOW CONTROLS Used as pilot choke valves for solenoid controlled pilot operated directional valves and pilot operated directional valves. Graphic Symbols Valve Size 3 Standard Type P AB T TCG- P A B T
Safety directional valves with spool position monitoring
Table EY0100/E Safety directional valves with spool position monitoring Onoff, direct operated, conforming to Machine irective 2006/42/E certified by ody Spool Inductive proximity sensor FI Inductive position
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
A range of cost saving solutions. Flowmeters &Monitors. Flowmeters &monitors
range of cost saving solutions Flowmeters &Monitors 29 Flowmeters &monitors LoFlow - and Flowmeters Easy to read, permanent printed scales. Large scale definition for precise measurement. Easy panel mounting
Smith Meter Truck Meter Packages Specifications
Issue/Rev. 0.4 (8/12) P Meter Smith Meter Truck Meter Packages Specifications ulletin SS01095 TP (Ticket Printer) LN (Large Numeral ounter) Preset ounter Air Eliminator/ Strainer Faucet P Meter Smith Meter
DRV7 and DRV7G SG Iron Pressure Reducing Valves
Local regulations may restrict the use of this product to below the conditions quoted. n the interests of development and improvement of the product, we reserve the right to change the specification without
Directional Controls. Solenoid Controlled Pilot Operated Directional Valve. Vickers DF5S4(L)-16*A/B/C/N-(*)-(E)*-53. Service Data I 3622-S
Service Data Vickers Directional Controls Solenoid Controlled Pilot Operated Directional Valve DF5S4(L)-16*-(*)-(E)*-53 Revised 2/01/98 I 3622-S See back page for solenoid indicator lights. Pilot Attaching
Check Valve, Size 04 16
, Size 04 6 Spherical poppet-type, screw-in design Series RKVE -VD 0 l/min, 50 bar for the same pressure differential, Q max. is around 50% higher than with standard RKVE valves no soft seal, therefore
A single KTM 3-Way ball valve replaces several 2-Way saving valuable space and simplifying piping
single KTM -Way ball valve replaces several -Way saving valuable space and simplifying piping Features Positive alignment of body low out-proof stem Sphericity tolerance of the ball is unsurpassed Reinforced
Centro-Matic Automated Lubrication Systems Grease Injectors
SL-33 For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11. Available in
Flow Control Valves and Flow Control Valves with reverse flow check DV/DRV
Flow Control Valves and Flow Control Valves with reverse flow check DV/DRV up to 350 bar up to 300 l/min 1. DESCRIPTION 1.1. GENERAL HYDAC flow control valves and flow control valves with reverse flow
GEAR PUMPS DIMENSIONAL DETAILS
DIMENSIONAL DETAILS OUTLET INLET TYPE DISPLACEMENT CM 3 /REV FLOW AT 1500 REV/MIN MAX. WORKING PRESSURE MAX. SPEED DIMENSIONS MM P1 P2 P3 RPM L M D2 1.4 2.0 270 290 310 6000 40 79 D3 2.1 2.9 270 290 310
Series 870 Sleeve coupling for repairs Sizes Ø 25, Ø 32, Ø 40, Ø 50
ouplings for polyethylene pipe series cert. n 0003 ISO 9001 LFFI 01037/03 G Function couplings, which are supplied in brass for diameters up to 63 mm and in cast iron for larger sizes, are used for connecting
VJO1-06/S. Functional Description HA /2010. Check Valves. Replaces HA /2008. Size to 06 (1/4) bar (4600 PSI)...20 L/min (5.
Check Valves VJO1-06/S Size to 06 (1/4)...320 bar (4600 PSI)...20 L/min (5.3 GPM) HA 5004 11/2010 Replaces HA 5004 4/2008 Small dimensions Two models Poppet design Leak-free closure in one direction VJO1-06/Sx-1
CHECK VALVE - DIRECT OPERATED - Series VC4V SPECIFICATIONS PERFORMANCE CURVES VC4V03 VC4V10 VC4V06
CHECK VLVE - DIRECT OPERTED - Series VV Veljan Direct operated Check Valve Series VV are poppet type and designed for a maximum pressure of 35 bar and a flow capacity rangg from 18 l/m for a 3/8 valve
Proportional Valves. Proportional solenoid valves for pressure and flow control B-1.A. An Eaton Brand
Proportional Valves Proportional solenoid valves for pressure and flow control An Eaton rand -.A Proportional Valves Valve Locator/Section Contents Note: Proportional valve solenoid coils and electronic
Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid
Restrictors / One Way Restrictors
FLOW CONTROLS This valve is used to regulate an actuator speed in a circuit where line pressure is almost steady and small fluctuation of oil flow due to pressure changes is permitted. Integrated check
CALEFFI. Diverter and isolation valves for panel radiators. 3010, 3011, 3012, 3013 series 01036/12 NA. Function. Product range
iverter and isolation valves for panel radiators 00, 0, 02, 0 series RIT LI 006/2 N ISO 900 M 2654 ISO 900 No. 000 unction aleffi 0 series valves are installed on panel style radiators. They are connected
p max (see table of performances) Q max (see table of performances) bar Maximum flow rate from port P to A - B - T l/min
41 400/117 ED E*P4 PILOT OPERATED DISTRIBUTOR SOLENOID OR HYDRAULIC (C*P4) CONTROLLED E4P4 CETOP P05 E4R4 ISO 4401-05 E5 ISO 4401-08 p max (see table of performances) Q max (see table of performances)
VJL Functional Description. Ordering Code VJL Spare Parts HA /2002. Logical 3-way check valves. Replaces HA /2001
Logical 3-way check valves VJL2-304 HA 5007 3/2002 Size 04 p max up to 210 bar Q max up to 15 L/min Replaces HA 5007 6/2001 Screw-in cartridge valve For leak-free applications Simple design High reliability
Pressure limitation and feed valve, pilot-operated Type MHDBN...Y
Pressure limitation and feed valve, pilot-operated Type MHDBN...Y RE 64600 Edition: 06.2018 Sizes 22, 32 Series 3X Maximum working pressure 420 bar Maximum flow 400 l/min H8121 Features Screw-in cartridge
BV3H & BV4H True Multi-Way
6, PSI trunnion type with stock L/T/X ball patterns Supports high port-to-port ΔP ~ s from ¼" to " all DMI for pricing & availability if you require higher pressure or larger multi-way valves. DMI V3H
DIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 GENERAL DESCRIPTION RH0...1-...F... Document: DCVC3-1-Aug 2013 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction RH0...1-...F...
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
Centro-Matic Automated Lubrication Systems Grease Injectors
Series SL-33 For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11. Available
2/2 Logic Cartridge Valve, Size 10
2/2 Logic Cartridge Valve, Size 10 Q max = 10 l/min, p max = 420 bar ctive Control, Seated Design ctive control rea ratio 2 : 1 High flow rates with low p Seat-valve shut-off from and No pilot oil consumption
Function Fittings, Flow Controls, and Accessory Valves
Section 3 Function Fittings, Flow ontrols, and Accessory Valves 12 VA Right Angle (anjo) Flow ontrol (inch-knob adj.)..fit-3-3 12 V Right Angle (anjo) Flow ontrol (inch-slot adj.)...fit-3-3 1 TA Right
IFP MPC(D)03 PILOT CHECK VALVE MODULE
IFP MPC(D)03 PILOT CHECK MODULE ISO4401-03 SIZE/NFPA D03 STEEL SEAT FOR LONG WEAR ZERO LEAKAGE DECOMPRESSION FEATURE C:\wliu\MPC.bmp MPC-03-W MPC-03-A MPC-03-B MPC (D) - 03 - W - 1 MODULAR CHECK DECOMPRESSION
Inline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
RS* /110 ED DOUBLE-ACTING THROTTLE FLOW CONTROL VALVE SERIES 30. Q max (see table of performances) THREADED PORTS CARTRIDGE TYPE
31 200/110 ED RS* DOUBLE-ACTING THROTTLE FLOW CONTROL VALVE SERIES 30 THREADED PORTS CARTRIDGE TYPE p max (see table of performances) Q max (see table of performances) OPERATING PRINCIPLE The RS* and RS*-I
fluid control Fluid Control Components Index
Fluid ontrol omponents Index VH Series 1 heck valves XVH Series 5 Excess flow valves 6100/6200 Series 13 heck valves 691F Series 16 heck valves R6000 Series 18 djustable relief valves 6600 Series 24 leed
DEP7 SG Iron Excess Pressure Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Inline Filter MFM. Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS / steel E /01.04
Inline Filter MFM Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS 400-15 / steel 1. TECHNICAL SPECIFICATIONS 1.1. FILTER HOUSING Construction The inline filter consists of a filter
DYNACTO 12 to 400. Spring return hydraulic actuators. DYNACTO 12, 25, 50 and 100: rack and pinion kinematics
Type series booklet DYNACTO 12 to 400 8556.11/3--10 Spring return hydraulic actuators DYNACTO 12, 25, 50 and 100: rack and pinion kinematics DYNACTO 200 and 400: scotch -yoke kinematics Output torques
ISO 4401 size 07; 315 bar (4500 psi); up to 200 L/min (53 USgpm) General Description
Vickers SystemStak SystemStak Valves ISO 441 size 7; 315 bar (45 psi); up to 2 L/min (53 USgpm) General Description This range of stackable hydraulic controls are designed to be mounted under a size 7
DIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 CONTENTS: RH06...1 - electrical control... RH06...2 - hydraulic control... Page 1/17...7/17 8/17...9/17 RH06...4 - mechanical control RH06...6 - pneumatic control......
Piston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
PowrFlow PVX Vane Pumps
PowrFlow PVX Vane Pumps POWRFLOW PVX VANE PUMPS YOUR SOURCE FOR VANE PUMPS FOR THE MOST DEMANDING APPLICATIONS What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane
Full Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
DRV4 and DRV4G Cast Steel Pressure Reducing Valves
Local regulations may restrict the use of this product to below the conditions quoted. n the interests of development and improvement of the product, we reserve the right to change the specification without
Hydraulic Valves. Experience plus ideas
Hydraulic Valves Experience plus ideas Contents Type/Page Product information Hydraulic valves Function description Non-return valves Pg. 271 Non-return valves Pg. 272-273 RHD RHDI RHV RHZ Function description
HYDRAULIC DISC BRAKES LB, LBS, LBV- Wet
HYRULI IS S LB, LBS, LBV- Wet PPLITION» Heavy uty machinery» Wheel drives» Material handling» Mining» gricultural machines» onveyors» oor openers and swing drives etc. GENERL Fluid type O O Temperature
Catalog PowrFlowTM PVX Vane Pumps
Catalog PowrFlowTM PVX Vane Pumps Your source for vane pumps for the most demanding applications. What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane Pumps deliver
Rückschlagventile CHECK VALVES
Rückschlagventile CHECK VALVES 8 8.1 TECHNICAL DATASHEET Rückschlagventil - Innengewinde VU HYDRAULIC DIAGRAM CHECK VALVES USE AND OPERATION: blocked in the reverse one. MATERIALS AND FEATURES: Body: zinc-plated
3- and 4-Way Ball Valves KH3/KH4
3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an
Piston Accumulators Series Catalog /USA Page
atalog 1630-7/US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring
Fittings and Tubing QS Series
Fittings and Tubing QS Series Medium Since 1945 Autoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned
Solenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Solenoid valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Solenoid valves SOLENOID VLVES...- SV5-8-C/CM
AGS/MPN Series. Medium Pressure Filters. Global Filtration Technology
Medium Pressure Filters Global Filtration Technology 63 Features/Applications for Medium Pressure Inline Filters AGS Series Rated Working Pressure 1000 PSI Rated Static Pressure 1500 PSI Flows to 25 GPM
ELD Series - DC Motor Drive
ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended
AP312HP Gear Pumps. Single and multiple cast iron gear pumps. Reference: 200-P EN-01 1/54. Issue:
Gear Pumps Single and multiple cast iron gear pumps Reference: 200-P-991239-EN-01 Issue: 11.2017 1/54 Contents Page 1 General information... 3 1.1 External gear pumps components and construction / benefits...
R EGI S TERED. Function
Z series zone valves R EGI S TERE S EN ISO 900:000 ert. n FM 64 UNI EN ISO 900:000 ert. n 0003 LEFFI 0/09 N Replaces 0/04 N Function Z-one valves are used to automatically shut-off the flow or redirect
Dual Axis Hydraulic Joystick Series JH4
Dual Axis Hydraulic Joystick Series JH4 03.JH4-0911 Index of content: Description & technical data: Page 3 Hydraulic circuit diagrams (joysticks): Page 4 Typical hydraulic circuit diagrams (system): Page