Restrictors / One Way Restrictors
|
|
|
- Preston Golden
- 6 years ago
- Views:
Transcription
1 FLOW CONTROLS This valve is used to regulate an actuator speed in a circuit where line pressure is almost steady and small fluctuation of oil flow due to pressure changes is permitted. Integrated check valve allows reversed free flow from outlet to inlet port. Pressure balanced construction provides less effort in adjustment at high pressure. Graphic Symbols SRT/ SRCT/ SRT/ SRCT/ Specifications Valve Name Restrictor Threaded Connection Mounting SRT-3-/8/9-3-/9 SRT--/8/9 --/9 SRT--/8/9 --/9 Rated Flow () 3 (7.9) 85 (.) 3 (.7) Max. Operating Pres. MPa (PSI) 5 (33) Threaded Connection.5 (3.3) 3.8 (8.) 9. (.) Approx. Mass kg (lbs.) Mounting.5 (5.5) 3.9 (8.) 7.5 (.5) Restrictors One Way Restrictors SRCT-3-/8/9-3-/9 3 (7.9).5 (3.3).5 (5.5) One Way Restrictor SRCT--/8/9 --/9 85 (.) 5 (33) 3.8 (8.) 3.9 (8.) SRCT--/8/9 --/9 3 (.7) 9. (.) 7.5 (.5) Rated flow stands for approximate flow rate when the pressure drop between inlet and outlet ports of the valve in fully opened condition becomes.3 MPa ( PSI) maximum at fluid's specific gravity of.85 and kinematic viscosity of mm /s (98 SSU). Yuken can offer flanged connection valves described below. For details, contact us. SRF/SRCF-- SRF/SRCF--9 SRF/SRCF-- SRF/SRCF--9 Rated Flow () 3 (.7) (3) Max. Operating Pressure MPa (PSI) 5 (33) Model Number esignation F- SR T -3 - Special Seals Series Number Type of Mounting Valve Size esign Number esign Standards F: Special Seals for Phosphate Ester Type Fluids (Omit if not required) SR: Restrictor SRC: One Way Restrictor T: Threaded Connection G: Mounting T: Threaded Connection G: Mounting None: Japanese Std. "JIS" 8: European esign Std. 9: N.American esign Std. None: Japanese Std. "JIS" & European esign Std. 9: N.American esign Std. None: Japanese Std. "JIS" 8: European esign Std. 9: N.American esign Std. None: Japanese Std. "JIS" & European esign Std. 9: N.American esign Std. 99
2 Attachment Mounting Bolts Valve Model Numbers /-3 /- /- Socket Head Cap Screw Japanese Std. "JIS" and European esign Std. N. American esign Std. M 5 Lg. 3/8- UNC -3/ Lg. M Lg. 3/8- UNC Lg. M 55 Lg. 3/8- UNC -/ Lg. Qty. Instructions Flow Adjustment Slacken the lock nut and turn the flow adjustment handle anti-clockwise to throttle flow. After achieving satisfactory performance tighten the lock nut. Valve Model Numbers Japanese Standard "JIS" CRGM-3- CRGM-3X- CRGM-- CRGM-X- CRGM-- CRGM-X- Thread Size Rc 3/8 Rc / Rc 3/ Rc Rc -/ Rc -/ European esign Standard CRGM-3-8 CRGM-3X-8 CRGM--8 CRGM-X-8 CRGM--8 CRGM-X-8 Thread Size 3/8 BSP.F / BSP.F 3/ BSP.F BSP.F -/ BSP.F -/ BSP.F N. American esign Standard CRGM-3-9 CRGM-3X-9 CRGM--9 CRGM-X-9 CRGM--9 CRGM-X-9 Thread Size 3/8 NPT / NPT 3/ NPT NPT -/ NPT -/ NPT Approx. Mass kg (lbs.). (3.5). (3.5). (5.3) 3. (.).8 (.) 5.7 (.) s are available. Specify the sub-plate model number from the table above. When sub-plates are not used, the mounting surface should have a good machined finish. s are common with right angle check valves. For dimensions, see page. SRT/SRCT-3-/8/9 SRT/SRCT--/8/9 SRT/SRCT--/8/9 IMENSIONS IN MILLIMETRES (INCHES) INC. C K 5 (.) ia. L 9(.75) Hex. "N" Thd. H Fully Extended F J "E" ia. "N" Thd. SRT/SRCT-3- SRT/SRCT-3-8 SRT/SRCT-3-9 SRT/SRCT-- SRT/SRCT--8 SRT/SRCT--9 SRT/SRCT-- SRT/SRCT--8 SRT/SRCT--9 imensions mm (Inches) C E F H J K L 7 (.83) (3.9) 38 (5.3) 3 (.) (.97) 9 (.7) (.73) 58 (.8) 8 (3.5).5 (5.93) 8 (7.9) 7 (8.9) 53.5 (.).5 (.) 8 (3.39) 38 ia. (.) Sq. (.) 8 Sq. (3.5) (.8) (.5) 8 (3.3) (.87) 3 (.) (.57) Thd. Size "N" Thd. Rc 3/8 3/8 BSP.F 3/8 NPT Rc 3/ 3/ BSP.F 3/ NPT Rc -/ -/ BSP.F -/ NPT 3
3 FLOW CONTROLS /-3-/9 Mounting surface: ISO578-AG---A 9(.75) Hex. Fully Extended.5(5.93) INC..9 (.9) 5 (.) ia. 3 (.) Locating Pin (.) ia. 3 (.) (.3) ia. Through 7.5(.9) ia. Spotface Places.7 (.) 33.3 (.3).7 (.3) 9 (3.5) 3 (.8) (.5) (.) Mounting Surface (s Furnished) Note: For dimensions of the valve mounting surface, see the dimensional drawing (P.) of the sub-plate used together. Restrictors One Way Restrictors /--/9 IMENSIONS IN MILLIMETRES (INCHES) Mounting surface: ISO578-AH-8--A INC. 9(.75) Hex. 5 (.) ia. 37 (.) Locating Pin (.) ia. 3.5 (.) Fully Extended 8(7.9).3 (.37) (.3) ia. Through 7.5(.9) ia. Spotface Places.3 (.) 39.7 (.5) 79. (3.3) (.) 35 (.38) 3 (.) 79 (3.) (.) Mounting Surface (s Furnished) Note: For dimensions of the valve mounting surface, see the dimensional drawing (P.) of the sub-plate used together. 3
4 /--/9 Mounting surface: ISO 578-AJ---A IMENSIONS IN MILLIMETRES (INCHES) 9(.75) Hex. INC. 5 (.) ia. (.5) Locating Pin (.) ia. (.73). (.) Fully Extended 7(8.9) 8. (3.3) (.3) ia. Through 7.5(.9) ia. Spotface Places. (.) 8. (.9) 9.8 (3.8) 9 (.9) (.57) (.) 9 (3.5) (.) Mounting Surface (s Furnished) Note: For dimensions of the valve mounting surface, see the dimensional drawing (P.) of the sub-plate used together. 3
5 FLOW CONTROLS Metred Flow vs Adjustment Handle Revolutions Hydraulic Fluid: Viscosity 3 mm /s ( SSU), Specific Gravity.8 P: ifferential Pressure MPa (PSI) -3, -3 P=5 (33) P= (9) P= (3) P= () P=7 () P= (58) P= (9) P= (5) P=.5 (7) Fully Open Adj. Handle Position (Number of turns) -, - P= (3) P= (9) P= () P=5 (33) P=7 () P= (58) 5 P= (9) P= (5) P=.5 (7) Fully Open Adj. Handle Position (Number of turns) -, P= (3) P= (9) P= () P=5 (33) 3 3 P=7 () P= (58) P= (9) P= (5) P=.5 (7) 8 Fully Open Adj. Handle Position (Number of turns) Restrictors One Way Restrictors Pressure rop Hydraulic Fluid: Viscosity 3 mm /s ( SSU), Specific Gravity.8-3, -3 Pressure rop MPa PSI Free Flow Spool Closed Controlled Flow Spool Fully Open 3 5 -, - Pressure rop PSI 3 MPa..3.. Free Flow Spool Closed Controlled Flow Spool Fully Open 8 Pressure rop PSI MPa , - Free Flow Spool Closed Controlled Flow Spool Fully Open Applicable only for one way restrictor (Model No. SRC* )
6 List of seals SRT/SRCT-3-/8/9 SRT/SRCT--/8/9 SRT/SRCT--/8/ For SRCT List of Seals List of Seal Kits Item 3 Name of Parts SRT SRCT -3 SO-NB-P5 SO-NB-P Part Numbers SRT SRCT - SO-NB-P SO-NB-P. SRT SRCT - SO-NB-P9 SO-NB-P3 Qty. Valve SRT/SRCT-3 SRT/SRCT- SRT/SRCT- Seal Kit Numbers KS-SRT-3- KS-SRT-- KS-SRT-- Note: When ordering the seals, please specify the seal kit number from the table right. /-3-/9 /--/9 /--/ For List of Seals List of Seal Kits Item 3 5 Name of Parts -3 SO-NB-P5 SO-NB-P SO-NB-P8 Part Numbers - SO-NB-P SO-NB-P. SO-NB-P8 - SO-NB-P9 SO-NB-P3 SO-NB-P3 Qty. Valve /-3 /- /- Seal Kit Numbers KS--3- KS--- KS--- Note: When ordering the seals, please specify the seal kit number from the table right. 3
FLOW CONTROLS. Maximum Flow U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols. Page. Valve Type.
FLOW CONTROLS Valve Type Graphic Symbols Maximum Operating Pressure MPa (PSI) Maximum Flow U.S.GPM 5 5 5 5 5 5 5 Page Flow Control Valves (5) 77 Flow Control and Check Valves (5) 77 Pilot Operated Flow
Throttle Modules / Throttle and Check Modules
FLOW CONTROLS Used as pilot choke valves for solenoid controlled pilot operated directional valves and pilot operated directional valves. Graphic Symbols Valve Size 3 Standard Type P AB T TCG- P A B T
Pilot Operated Flow Control Valves / Pilot Operated Flow Control and Check Valves
FLOW CONTROLS Flow control of these valves is continuously made by a hydraulically operated pilot piston mechanism which controls opening area of the orifice of the valve. With the use of these valves,
Hydraulic Fluids. Note: For use with hydraulic fluids other than those listed above, please consult your Yuken representatives in advance.
Hydraulic Fluids Fluid Types Any type of hydraulic fluids listed in the table below can be used. Petroleum base oils Use fluids equivalent to ISO VG 32 or VG 46. Use phosphate ester or polyol ester fluid.
Min. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min.
Flow Control These are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (Viscosity of the fluid). They
EMulti Purpose Control Valves
IRCTIONAL CONTROLS The Yuken Multi-Purpose Valves Comply with The Needs of Reducing Cost and Size of Your Machine YUKN's Multi Purpose Valve s are compound valves composed of the main valve having four
Flow Control Valves / Flow Control and Check Valves
LOW CONTROLS These valves are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (viscosity of the fluid).
Pressure Reducing and Relieving Valves
reducing and relieving valves are composite pressure control valves having pressure reducing and counterbalancing functions developed for hydraulic balancing circuits. Specifications RBG-- * - * RBG-6-
Max. Operating Pressure Kgf/cm 2
In-Line Check Valves DIRCTIONAL CONTROLS These valves allow free flow in one direction and prevent flow in the reverse direction. Cracking pressure specified is the pressure required to open the valve
PRESSURE REDUCING AND RELIEVING VALVES
REDUING AND RELIEVING VALVES RBG-3 / 6 (3/8, 3/4) Mounting Specifications / Model Number Designation / Others Up to 25 (363 ), 25 (33 U.S.GPM) reducing and relieving valves are composite pressure control
Proportional Electro-Hydraulic Pilot Relief Valves
Proportional Electro-Hydraulic This valve consists of a small DC solenoid and a direct-acting relief valve. It serves as a pilot valve for a low flow rate hydraulic system or a proportional electro-hydraulic
Proportional Electro-Hydraulic Flow Control and Relief Valves
Ω Ω Proportional Electro-ydraulic Flow ontrol and Relief Valves This flow control and relief valve is an energy-saving valve that supplies the minimum pressure and flow necessary for actuator drive. Since
Proportional Electro-Hydraulic Flow Control (and Check) Valves
Ω Proportional Electro-ydraulic Flow Control (and Check) Valves Since the preselected flow rate continuously varies in proportion to the current input to the valve, the system flow rate can be remotecontrolled
UNLOADING RELIEF VALVES
UNLOADING RELIEF VALVES BUG-6/1 (3/4, 1-1/4) Specifications / Model Number Designation Up to 21 (35 ), L /min (66 ) Pub. E- These valves are used to operate the pumps with minimum load in accumulator circuits
Max. Reversed Free Flow. Max. Operating. Pressure MPa (PSI) Fine Feed 20 (5.3) 14 (2030) 40 (10.6) ( ) 40 (10.6) (
These valves are the combination of flow control valve, a deceleration valve and a check valve and used mainly for controlling rapid traverse and feed cycles machine tools. Switching from rapid traverse
Direct Operated Type Directional and Flow Control Valves
Specifications igh Response Type Proportional Electro-ydraulic Directional and Flow Control Valves igh response, high precision and high reliability are achieved be a combination of a compact and powerful
"A" Series Variable Displacement Piston Pumps Single Pump, Pressure Compensator Type
A"A" Series PISTON PUMPS Single Pump, Compensator Graphic Symbol M O Specifications Model s A-FRB- A-FRC/H- A- -R-- - -K- A- -R-- - -K- A- -R-- - -K- A- -R-- - -K- A- R S- A9- R S- A- R S- Geometric Displacement
Max. Reversed Free Flow L/min
These Valves are the combination of flow control valve, a deceleration valve and a check valve and used mainly for controlling rapid traverse and feed cycle in machine tools. Switching from rapid traverse
PRESSURE REDUCING AND RELIEVING VALVES
REDUING AND RELIEVING VALVES RBG-3 / 6 (3/8, 3/4) Mounting Specifications / Model Number Designation / Others Up to 5 (363 ), (33 U.S.GPM) reducing and relieving valves are composite pressure control valves
" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps AR Axial Port Type AR Side Port Type "AR" series variable displacement pump has been developed which the aim of even further the quientness in operation, smaller
Poppet Type Directional Valves
IRCTIONAL CONTROLS Poppet Type irectional Valves Valve Type Graphic Symbols Max. Operating Pressure MPa (PSI) Maximum Flow U. S. GPM.5 5 5 5 5 5 L/min Page Poppet Type Solenoid Operated irectional Valves
"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22-FR01
"AR" SERIES Variable Displacement-Single Pumps Compensator Type, / AR-FR1 Up to 1 MPa ( PSI),. cm /rev ( CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj. Screw
50T,150T,250F SERIES Fixed Displacement-Single, Double, Combination
T,T,F SERIES Fixed Displacement-Single, Double, Combination Up to 7 MPa ( PSI), 9 cm /rev (. CU.IN./rev) Single Pumps These pumps are widely used as a source of hydraulic power. They combine stable performance
Series Proportional Electro-Hydraulic Controls
Proportional Electro-ydraulic Controls Types Graphic Symbols Max. Operating Pressure () Maximum Flow U.S.GPM. 3 3 3 L/min Page Pilot Relief Valves. (3) EDG 67 Relief Valves. (3) EBG 3 6 676 Relieving and
"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22- FR01 3
"AR" SERIES Variable Displacement-Single Pumps Compensator Type,AR / AR- FR Up to MPa ( PSI),. cm /rev (.5 CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj.
" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps Compensator Type Constant Power (Torque) Control Type Load Sensing Type Pump Type Graphic Symbol Geometric Displacement cu. in./rev...5 5 5 5 5 cm /rev Maximum
Proportional Electro-Hydraulic Directional and Flow Control Valves
Proportional Electro-Hydraulic s These valves are double-deck directional and flow control valves employing as their pilot the electro-hydraulic proportional pressure reducing valves with two proportional
SHUT-OFF TYPE SOLENOID OPERATED DIRECTIONAL VALVES DSPC/DSPG-01/03(1/8,
SHUT-OFF TYP SOLNOID OPRATD VALVS DSPC/DSPG-/(/8, /8) Cartridge Type / Mounting Up to 5 MPa (6 PSI), 8 (. U.S.GPM) Pub. C- The shut-off type solenoid operated directional valves are poppet type solenoid
50T,150T,250F SERIES Fixed Displacement-Single, Double, Combination 3
T,T,F SERIES Fixed Displacement-Single, Double, Combination Up to 7 MPa ( PSI), 9 cm /rev (. CU.IN./rev) Single Pumps These pumps are widely used as a source of hydraulic power. They combine stable performance
ISD SO-NB-G105 SO-NB-G85 SO-NB-P46 PV2R1-* - * -RAA-42/4290 PV2R2-* - * -RAA-41/4190 PV2R3-* - * -RAA-31/3190 PV2R4-* - * -RAA-30/3090
Spare Parts List PVR-* - * -RAA-4/4 PVR-* - * -RAA-4/4 PVR-* - * -RAA-/ PVR4-* - * -RAA-/ 4 5 4 6 8 8 6 5 4 Y Section Y-Y Y 6 5 Section - 8 Cartridge Kits Model Numbers PVR-6- * -RAA-4 * PVR-8- * -RAA-4
06 SERIES MODULAR VALVES. Pub. EC-1404
6 SERIES General Information Mounting Surface : ISO -AE-8--A, CETOP-8, NPA-D6 Up to 5 MPa (363 PSI), 5 L /m in (3 U.S.GPM) Pub. EC- The modular valves are functional elements with which a hydraulic system
PROPORTIONAL ELECTRO-HYDRAULIC CONTOROLS
H PROPORTIONAL ELECTRO-HYDRAULIC CONTOROLS -Hybrid Components...Page Proportional Electro-Hydraulic Control Valves...Page 7 Proportional Electro-Hydraulic Controls High-accuracy, simple, convenient realizes
VANE PUMPS. Output Flow at 1200 r/min at No-Load U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols.
B VANE PUMPS Pump Type "PVR" Series Single Pumps Graphic Symbols at r/min at No-Load.. PVR PVR PVR PVR Maximum Operating MPa (PSI) () Page Fixed Displacedment "PVRA" Series Single Pumps "PVR" Series Double
EH SERIES PROPORTIONAL ELECTRO-HYDRAULIC CONTROL VALVES
Pub. EC- E SERIES ELECTRO-YDRAULIC CONTROL VALVES Pilot Relief / Relief / Reducing and Relieving / Flow Control / Flow Control and Relief / Directional and Flow Control Up to. ( PSI), L/min (6 U.S.GPM)
Proportional Electro-Hydraulic Relieving and Reducing Valves
These valves consist of a small size but high performance EH series electro-hydraulic proportional pilot relief valve and reducing valve with relief function. The valves control the system pressure proportionally
EMechanically Operated Directional Valves
E DIRECIONL CONROLS Cam Operated Directional Valves hese valves may be used to shift the direction of oil flow by depressing the spool by way of a cam. Specifications Max. Operating Max. -Line Max. Flow
Solenoid Controlled Relief Valves
hese valves are a comination of a pilot operated relief valve and a solenoid operated directional valve. Piping etween the two is eliminated as the solenoid valve is directly mounted on the relief valve
E SERIES. Proportional Electro-Hydraulic Relief Valves. Specification. Model Number Designation. Attachment Mounting Bolts
ydraulic Relief s The electro hydraulic relief valve is designed for compactness and high efficiency. The valve provides fast proportional response to the input current. For linear pressure control a special
EManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM-- -
EManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM--B -
RELIEF VALVES Remote Control / Direct Type Pilot Operated / Solenoid Controlled
RELIEF VALVES Remote ontrol / Direct ype ilot Operated / Solenoid ontrolled Up to 5 Ma (3630 SI), 0 L /m in (06 U.S.GM) ub. E-00 Remote ontrol Relief Valves... age 3 his valve is used as a remote control
"PV11R" SERIES Fixed Displacement- Single PV11R10/PV11R20
"PVR" SERIES Fixed Displacement- Single PVR/PVR Up to MPa ( ),. cm /rev (. CU.IN./rev) Pub. EC- These pumps are of completely unique design for extra high pressure applications. The excessive wear to the
AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps
Variable Displacement Piston Pumps AR Series Variable Displacement Piston Pumps Geometric Displacement Maximum cm 3 /rev Operating Pump Type Graphic Symbol Pressure Page 1 2 5 10 20 50 100 150 MPa Variable
VARIABLE DISPLACEMENT PISTON PUMPS
VRIBLE DISPLCEMENT Pump Type "R" Series Variable Displacement Piston Pumps Maximum Operating MPa (PSI) () Geometric Displacement cu. in./rev... cm /rev R R Catalogue No. Pub. EC- "" Series Variable Displacement
Vent Connection. Pres. Adj. Range BT BG * ~ BG F- B T -03 P -V -32.
These valves protect the hydraulic system from excessive pressure, and can e used to maintain constant pressure in a hydraulic system. Remote control and unloading are permitted y vent circuit. PRESSURE
10 SERIES MODULAR VALVES. Pub. EC-1405
SERIES General Information Mounting Surface : ISO ----, CETOP-, NP-D Up to 5 MPa (363 PSI), 8 L /m in ( U.S.GPM) Pub. EC-5 The modular valves are functional elements with which a hydraulic system can be
EHBG-03 EHBG-06 EHBG-10. Refer to Model No. Designation. 2% or Less(1%) 1% or Less *2. Refer to frequency Response on page V DC
Proportional Electro-ydraulic These valves, consist of a small size but high performance E series electro-hydraulic proportional pilot relief valve and a low noise type relief valve. The valves control
AR Series Variable Displacement Piston Pumps. [Comparison of AR16 with A16 ] A16,32 Design 188. AR16,22 Design 130. Ratio of Mass (AR16/A16) 74%
![AR Series Variable Displacement Piston Pumps. [Comparison of AR16 with A16 ] A16,32 Design 188. AR16,22 Design 130. Ratio of Mass (AR16/A16) 74%](/thumbs/89/97534102.jpg "AR Series Variable Displacement Piston Pumps. [Comparison of AR16 with A16 ] A16,32 Design 188. AR16,22 Design 130. Ratio of Mass (AR16/A16) 74%")
PISTON PUMPS EIC--11- Features Smaller in Size and Lighter in Mass s indicated in the dimensional comparison presented below, the R1 is smaller than the 1(3 design). lso, the mass of R1 is substantially
A Series Variable Displacement Piston Pumps
A Series Variable Displacement Piston Pumps A37 A56 A1637 A16 A10 A Series Variable Displacement Piston Pumps Pump Type Graphic Symbol Geometric Displacement cm 3 /rev 1 5 10 0 50 100 00 300 Maximum Operating
10 SERIES MODULAR VALVES
General Information Mounting Surface : ISO 441-A-1-4-A, CETOP-1, NPA-D1 Up to 5 MPa (363 PSI), 8 L /min (11 U.S.GPM) Pub. EC-145 The modular valves are functional elements with which a hydraulic system
03 SERIES. General Information Mounting Surface : ISO 4401-AC-05-4-A, CETOP-5, NFPA-DO2 Up to 25 MPa (3630 PSI), 70 L /min (18.5 U.S.
3 SERIES General Information Mounting Surface : ISO 44-C--4-, CETO-, N-DO Up to Ma (363 SI), 7 L /min (8. U.S.GM) ub. EC-43 MODULR VLVES The modular valves are functional elements with which a hydraulic
BST / BSG-03 / 06 / 10 Threaded Connections / Sub-plate Mounting. Specifications / Model Number Designation. Max. Flow L/min (U.S.GPM) Double Sol.
Specifications hreaded Connection Mounting BS-- - - - -47 BS-06- - - - -47 BS-0- - - - -47 BSG-- - - - -47 BSG-06- - - - -47 BSG-0- - - - -47 BS / BSG- / 06 / 0 hreaded Connections / Mounting Specifications
High Pressure, High Flow Rate Modular Valves
High Pressure, High Modular Valves EIC-F-14- MODULR VLVES The modular valves are functional elements with which a hydraulic system can be composed and built easily by stacking them with the mounting bolts.
Max. Operating Pressure Kgf/cm 2. F- YB T -01 -F Max. Operating Design Pressure Kgf/cm 2 Number. Panel. Mounting
Remote ontrol Relief Valves his valve is used as a remote control valve for pilot operated type pressure control valves. EI--1-0 Graphic Symbol Specifications hreaded onnection Designation F- YB -01 -F
"A" Series Piston Pumps Variable Displacement-Single Pumps Electro-Hydraulic Proportional Pressure & Flow Control. Type
Variable Displacement-Single Pumps Electro-Hydraulic Proportional & Flow Type 6 / / 7 / 6 / 7 / 9 / Model Number Designation Safety valve Input Signal for Flow Input Signal for mplifier Proportional Solenoid
E SERIES. Proportional Electro-Hydraulic Relief Valves. Specification. Model Number Designation. Attachment Mounting Bolts
s The electro hydraulic relief valve is designed for compactness and high efficiency. The valve provides fast proportional response to the input current. For linear pressure control a special venting feature
Proportional Electro-Hydraulic Flow Control (and Check) Valves
Proportional Electro-Hydraulic Flow Control (and Check) Valves EH SERIES The system flow rate can be controlled remotely as desired by regulating input voltage. Further, since pressure and temperature
PISTON PUMPS. A3H Series High Pressure Variable Displacement Piston Pumps. Features. A3H Series Variable Displacement Piston Pumps.
3H Series High Variable EIC--13- Features 1 Control System for Wide Range pplication: 1 Compensator Type 3H Series High Variable 9 Constant Power Control Type 1 Load Sensing Type For these controls system,
Modular Valves. Ratings
High Pressure, High Flow Rate Features Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly
Series Shockless Type Solenoid Controlled Pilot Operated Directional Valves
Solenoid Controlled ilot Operated Directional Valves Electronic Circuit X Specifications Descriptions G-DSHG-4-3C - - - -/9 G-DSHG-6-3C - - - -/9 Max. Flow /min (U.S.GM) 16 (4.3) (66.1) 1 1 Max. Operating
PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS
H PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS Hydraulic Controls H-3 H-1 E Series Hydraulic Controls Hydraulic Controls Max. Maximum Flow Types KS Graphic Symbols Operating L/min 1 2 3 5 10 20 30 50 100 200
ARL1 Series Piston Pumps. ARL1 Series Piston Pumps. Geometric Displacement. Maximum cm 3 /rev
ARL1 Series Piston Pumps Geometric Displacement Maximum cm 3 /rev Operating Pump Type Graphic Symbol Pressure Page 1 2 5 10 20 50 100 150 MPa ARL1-6 Piston Pump ARL1-8 ARL1-12 7 8 ARL1-16 5 Hydraulic Fluids
Low Noise Type Solenoid Controlled Relief Valves
he low-noise solenoid controlled relief valve is a combination of a low-noise type pilot operated relief valve and a solenoid operated directional valve. It is used for no-load pump operation by using
PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS
H PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS Hydraulic Controls H-3 H-1 E Series Hydraulic Controls Hydraulic Controls Max. Maximum Flow Types KS Graphic Symbols Operating L/min 1 2 3 5 10 20 30 50 100 200
01 SERIES MODULAR VALVES. Pub. EC-1402
SERIES General Information Mounting Surface : ISO --3--, CEO-3, N-D Up to 3.5 Ma (57 SI), 35 L /m in (9.5 U.S.GM) ub. EC- MODULR VLVES he modular valves are functional elements with which a hydraulic system
"G" SERIES SHOCKLESS TYPE SOLENOID OPERATED DIRECTIONAL VALVES G-DSG-01/03 (1/8, 3/8) "G" SERIES SHOCKLESS TYPE
"G" SRIS SHOCKLSS Y NOID ORD DIRCIL VLVS G-DSG-1/3 (1/, 3/) "G" SRIS SHOCKLSS Y NOID CROLLD ILO ORD DIRCIL VLVS G-DSHG-/ (1/, 3/) Mounting Up to 5 Ma (33 SI), 5 L /m in (.1 U.S.GM) ub. C-5 DIRCIL CROLS
A Series Variable Displacement Piston Pumps. A16 Type performance characteristics A16 Type Noise level characteristics.
EIC--12- PISTON PUMPS Series Variable Features High efficiency Under the conditions of pressure 16 Kgf/cm² and speed 18 r/min. volumetric efficiency is over 98% and the overall efficiency is over 9%. Low
High Pressure, High Flow Rate Modular Valves
eatures Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly and easily. roblems such
Graphic Symbol 100 L 140 G25. R -M V 4 4 G P E. Perm.* 2 Magnet. Differential Pressure P. Connection. R: BSP.F Thd. O: Not Fitted.
ollowing are the Accessories used in the Hydraulic Systems iller Breather Model Code Method of Representation: According to Model Code in the above table. Suction Strainer Model Code SS 15 evel Gauge iltration
DIRECTIONAL CONTROLS. Pilot Operated Directional Valves. Specifications
ilot Operated Directional s DIRECIONL CONROLS hese valves perform a change over of spool by hydraulic pilot and shift the direction of oil flow. EIC-E-04-0 Specifications Model Numbers Maximum Flow L/min.
Type C2 Seat Type Solenoid Pilot Valve
Type C Seat Type Solenoid Pilot Valve JIS graphic symbols for hydraulic system T eatures No hydraulic locking occurs even during long periods of pressurized operation Nomenclature 1 3 5 - - - - - 1 3 5
Pilot Operated Check Valves
Pilot Operated heck Valves Nomenclature IS graphic symbols for hydraulic system L eatures - P - - - - pplicable fluid code No designation: Petroleum-based hydraulic fluid, waterglycol hydraulic fluid :
Reducing Valve/Reducing Valve with Check Valve
Reducing Valve/Reducing Valve with Check Valve Nomenclature JIS graphic symbols for hydraulic system JGB JGBC Features - JGB - - - Applicable fluid code No designation: Petroleum-based hydraulic fluid,
Standard Hydraulic Power Units Power Packages
K Standard Hydraulic Power Units Power Packages Energy-Saving Hydraulic Units and Controllers Energy-Saving Control System for Hydraulic Units (Energy-Saving Controller) Equipped with the variable displacement
Pressure Control Valves
efore using the product, please check the Pressure ontrol Valves JIS graphic symbols for hydraulic system Refer to the next page. Features These direct operated control valves can be used as sequence valves,
4.2 FIXED DISPLACEMENT DOUBLE PUMP
4.2 FIXED DISPLACEMENT DOUBLE PUMP CONTENTS PVF101 Ordering Code 4.2.1 Fixed Displacement Technical Information 4.2.2 Specifications 4.2.3 Hydraulic fluids 4.2.4 Viscosity range 4.2.5 Temperature range
Variable Displacement Piston Pumps
A3HG Series High Pressure Variable Displacement Piston Pumps A3HG71 A3HG1 A3HG Through Drive A3HG Series High Pressure Variable Displacement Piston Pumps Pump Type Graphic Symbol Geometric Displacement
OBE (On-Board Electronics) Type Direct Operated Linear Servo Valves (Size: 01 & 03) LSVG-01-EH-*-**-**-10, LSVG-03EH-*-**-**-10/1006
NO. 10 01E September 1, 2010 Public Relations Group Products Publicity Section Sales Administration Department Hamamatsucho Seiwa Bdg., 4-8, Shibadaimon 1-chome, Minato-ku, Tokyo 105-0012, Japan Tel: +81-3-3432-2113
04 Series Modular Valves Release of New Series
NO. 11 05E September 5, 2011 Public Relations Group Products Publicity Section Sales Administration Department Hamamatsucho Seiwa Bdg., 4-8, Shibadaimon 1-chome, Minato-ku, Tokyo 105-0012, Japan Tel: +81-3-3432-2113
MODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31.
F MODULES YUKEN's are stack type valves, and require no piping. They not only rationalise system build, but they also meet the technical requirements for a variety of hydraulic systems. Stacking systems
Series Variable Displacement Piston Pump
AH Series Variable Displacement Piston Pump AH AH7 AH AH45 KS Geometric Displacement Max. Operating Series Graphic cm 3 /rev Pres. Page Symbol 3 4 5 6 7 8 9 3 4 5 MPa {kgf/cm 2 } AH-F-R--K-S- AH AH45-F-R--K-S-
High Response Type Proportional Electro-Hydraulic Directional and Flow Control Valves
igh Response ype roportional Electro-ydraulic s igh response, high precision and high reliability are achieved by a combination of compact and powerful solenoid and spool-position-detection LVD. Direct
These valves may be used to manually shift the spool position and change the direction of oil flow *2 1.8
DIRCINL CNRLS Manually perated Directional s hese valves may be used to manually shift the spool position and change the direction of oil flow. IC--1005-0 Specifications Numbers DMG-01-C -10 DMG-01-D -10
Flow Control Modular Valve (Pressure and temperature compensated)
v FLOW CONROL MOULR VLVE Flow Control (ressure and temperature compensated) Features to l/min,,ma C qhis modular valve is used to control actuator speed and for other flow control valve applications. w
HYDRAULIC CYLINDER CJT TYPE SERIES HYDRAULIC CYLINDER CJT SERIES HYDRAULIC CYLINDER WITH PROXIMITY SWITH C6 SERIES COMPACT CYLINDER J-1
J HYDRAULIC CYLINDER CJT TYPE 35 70 40 20 SERIES HYDRAULIC CYLINDER CJT SERIES HYDRAULIC CYLINDER WITH PROXIMITY SWITH C6 SERIES COMPACT CYLINDER J-4 J-45 J-5 J- Related to the unit and the design number
Modular Throttle Valve MST MT MTC MCT Solenoid Operated Throttle Valve Throttle Valve Throttle and Check Valve Counter Restrictors Valve
Modular Throttle MST MT MTC MCT Solenoid Operated Throttle Throttle Throttle and Check Counter Restrictors Modular Relief MGS MBR MCB MRB MSV MRV Two Section Reducing Reducing Counter Balance Balance Sequence
Where theree are hydraulic transmissions where there are YUCI products
YUCI HYDRAULIC YUCI SERIES HYDRAULIC VALVES Where theree are hydraulic transmissions where there are YUCI products Table of Contents Relief Valves 3 Pressure Reducing Valves, Pressure Reducing and Check
Manual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Manual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series) Hydraulic circuit (Example) AB AB AB X Z P Features hese stacking type multiple control valves are equipped
CONTINENTAL HYDRAULICS VAD05M-VMD05M - AIR & LEVER OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VAD05M-VMD05M AIR & LEVER OPERTAED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VAD05M-VMD05M AIR & LEVER OPERATED
ISO 4401 size 07; 315 bar (4500 psi); up to 200 L/min (53 USgpm) General Description
Vickers SystemStak SystemStak Valves ISO 441 size 7; 315 bar (45 psi); up to 2 L/min (53 USgpm) General Description This range of stackable hydraulic controls are designed to be mounted under a size 7
P.C. Priority Flow Control Valve Series J02D3. General Description
CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from
FLOW CONTROL VALVES F CONTROL VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.] Maximum flow rate L/min. Page
![FLOW CONTROL VALVES F CONTROL VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.] Maximum flow rate L/min. Page](/thumbs/96/128760697.jpg "FLOW CONTROL VALVES F CONTROL VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.] Maximum flow rate L/min. Page")
F FLOW CONTROL VALVES F FLOW CONTROL VALVES Model [Model No.] Maximum operating pressure MPa {f/cm } Maximum flow rate 5 5 5 Page Flow control valve [SF] 7 {7} F- Flow control valve Flow control valve
Pressure Relief Valves
VICKERS Pressure Relief Valves Unloading Relief Valves EURG1/2-06/10, 13 Design and EURT1/2-06/10, 12 Design Sectional Illustrations EURG* EURT* Basic Characteristics Mounting... Pipe or subplate mounting
Pol Ind Les Comes C/Alemania, 43 Nave Igualada (Barcelona) Telf Fax
A B I N A Table of Content REMOTE CONTROL RELIEF VALVE... 1-1 DIRECT TYPE RELIEF VALVE... 1-3 SUBPLATE... 1-6 PILOT OPERATED RELIEF VALVE... 1-7 SUBPLATE...1-11 LOW NOISE TYPE PILOT OPERATED RELIEF VALVE...1-13
GEAR PUMPS DIMENSIONAL DETAILS
DIMENSIONAL DETAILS OUTLET INLET TYPE DISPLACEMENT CM 3 /REV FLOW AT 1500 REV/MIN MAX. WORKING PRESSURE MAX. SPEED DIMENSIONS MM P1 P2 P3 RPM L M D2 1.4 2.0 270 290 310 6000 40 79 D3 2.1 2.9 270 290 310
RA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)
R 26 892/06.98 Pressure Reducing Valve, Pilot Operated Model DR (Series 5) Size 10 to 0... 5000 PSI (50 bar)... 105 GPM (400 L/min) R 26 892/06.98 Replaces: 05.94 Pilot operated pressure reducing valve
V 20 F - 1 P 13 S - 1 A 8H 22 L. Std. cover. 1/2 NPT thd. (V10 only) 3/4 NPT thd. (V20 only) 3/4-16 St. thd. (V10F & V20F) 3/4 16. St. thd.
Model Codes V 2 F - 1 P 13 S - 1 8H 22 L 1 2 3 4 5 6 7 8 9 1 11 12 1 Vane pump 2 Series 1 or 2 3 Integral valve options (Omit if not required) F Flow control & relief P Priority valve & relief 4 Mounting
PROPORTIONAL VALVES SERVO VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.]
![PROPORTIONAL VALVES SERVO VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.]](/thumbs/82/85298236.jpg "PROPORTIONAL VALVES SERVO VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.]")
J PROPORTIONAL VALVES SERVO VALVES J Model [Model No.] Solenoid pilot operated proportional relief valve [JRP] Solenoid operated proportional relief valve [JRPL] Type C2 solenoid operated proportional
Proportional Valves. Proportional solenoid valves for pressure and flow control B-1.A. An Eaton Brand
Proportional Valves Proportional solenoid valves for pressure and flow control An Eaton rand -.A Proportional Valves Valve Locator/Section Contents Note: Proportional valve solenoid coils and electronic
Manifold Regulator Modular Type. Regulator for manifold. Body size. Number of stations stations. 10 stations. Standard Specifications
Manifold Regulator Modular Type /3000 Series modular type that can be freely mounted on a manifold station. Optimal for central pressure control. Easily set up using the new knob. lso has a One-touch lock