RHD/V/Z non return valve
|
|
|
- Louise Summers
- 5 years ago
- Views:
Transcription
1 RHD/V/Z non return valve Design with sealing edge: Size 06L and 08L / 06S and 08S and all sizes in stainless steel with a PTFDE sealing disc. Design with O-ring (item. 7): Sizes L, 2L, 5L, 8L, 22L, 28L, 5L and 42L as well as S, 2S, 4S, 6S, 20S, 25S, 0S and 8S with a sealing disc out of NBR (steel) or FKM (stainless steel). : poppet 2: sealing disc : cover disc 4: spring 5: passage disc 6: Eolastic-sealing 7: O-ring DN = Nominal diameter (mm) Characteristics: Poppet check valve with a 90 valve seat with an elastomere sealing disc. Poppet stop for controlled valve opening. Damped opening action to minimize shock and noise. No reduction of cross section. Maximum flow velocity not more than 8 m/sec. Sealing of male stud thread by Eolastic soft seal with types RHV and RHZ. Opening pressure: bar (on request also 0.2, 0.5, 2,, 4, 5 and 6 bar are avail able; please specify on order). For working pressure see appropriate tables. Cracking pressure tolerance: ± 20 %. : Steel zinc-plated (CF Cr[VI]-free), seals in NBR (e.g. Perbunan), or (FKM) on request. Perbunan = registered trademark of Bayer Stain less steel valves have FKM as standard. (Up to bar cracking pressure) Brass-valves (CuZn5Ni ) with internals (.457) available on request. (Up to bar cracking pressure) Assembly: See assembly instructions for EO/EO 2 connections. Non-return valves are all packaged against contam ination. Media: Hydraulic oil, low flammability hydraulic fluids (excent for types HFC: for HFD types; FKM seals are necessary). Air pressure tested (please indicate on order). Not suitable for steam, combustible/explosive gases, or oxygen. For water applications, please consult Parker with details of water and any additives. P P9
2 pressure drop in bar pressure drop in bar pressure drop in bar pressure drop tube O.D. 06L/06+08S; size 4; female BSPP / 8, / 4 ; RVP ; DN.5 pressure drop tube O.D. 8L/S; size 5; RVP 6; DN 5.5 pressure drop tube O.D. L/2S; size 6 female BSPP / 8 ; RVP 20; DN 7.5 In all diagrams is the peak value of the. relating to the maximum permissible flow velocity of 8 m/sec. P
3 pressure drop in bar pressure drop in bar pressure drop in bar pressure drop tube O.D. 2L/4S; size 8; RVP 24; DN 9.5 pressure drop tube O.D. 5L/6S; size ; female BSPP / 2 ; RVP 27; DN.5 pressure drop tube O.D. 8L/20S; size 2; female BSPP / 4 ; RVP 5; DN 5.0 In all diagrams is the peak value of the. relating to the maximum permissible flow velocity of 8 m/sec. P P
4 pressure drop tube O.D. 22L/25S; size 6; female BSPP ; RVP 40; DN 9 In all diagrams is the peak value of the. relating to the maximum permissible flow velocity of 8 m/sec. pressure drop in bar pressure drop in bar pressure drop in bar pressure drop tube O.D. 28L/0S; size 20; female BSPP / 4 ; RVP 47; DN 24 pressure drop tube O.D. 5+42L/8S; size 24; female BSPP / 2 ; RVP 55; DN 29 P2
5 RHD Non return valve EO 24 cone end / EO 24 cone end D PN (bar) ) CF 7 CF 7 CF 7 Weight Series DN DN L L L2 L S S2 S2 S g/ piece Order code* CF 7 a L ) RHD06LOMD , RHD08LOMD RHDLOMD RHD2LOMD RHD5LOMD RHD8LOMD RHD22LOMD RHD28LOMD RHD5LOMD RHD42LOMD S 4 ) RHD06SOMD RHD08SOMD RHDSOMD RHD2SOMD RHD4SOMD RHD6SOMD RHD20SOMD RHD25SOMD RHD0SOMD RHD8SOMD ) L = light series; 4 ) S = heavy series P Steel, zinc plated, Cr(VI)-free CF RHD06LOMDCF NBR Stainless steel 7 RHD06LOMD7 VIT P
6 RHV-R-ED Non return valve EO 24 cone end / Male BSPP thread ED-seal (ISO 79) X) Eolastic sealing D PN (bar) ) CF 7 CF 7 CF 7 Weight Series T DN DN D L L L2 L L4 S S2 S2 S g/ piece Order code* CF 7 a L ) 06 G /8 A RHV06LREDOMD G /4 A RHV08LREDOMD G /4 A RHVLREDOMD G /8 A RHV2LREDOMD G /2 A RHV5LREDOMD G /2 A RHV8LREDOMD G /4 A RHV22LREDOMD G A RHV28LREDOMD G /4 A RHV5LREDOMD G /2 A RHV42LREDOMD S 4 ) 06 G /4 A RHV06SREDOMD G /4 A RHV08SREDOMD G /8 A RHVSREDOMD G /8 A RHV2SREDOMD G /2 A RHV4SREDOMD G /2 A RHV6SREDOMD G /4 A RHV20SREDOMD G A RHV25SREDOMD G /4 A RHV0SREDOMD G /2 A RHV8SREDOMD ) L = light series; 4 ) S = heavy series Steel, zinc plated, Cr(VI)-free CF RHV06LREDOMDCF NBR Stainless steel 7 RHV06LREDOMD7 VIT P4
7 RHZ-R-ED Non return valve Male BSPP thread ED-seal (ISO 79) / EO 24 cone end X) Eolastic sealing D PN (bar) ) CF 7 CF 7 CF 7 Weight Series T DN DN D L L L2 L L4 S S2 S2 S g/ piece Order code* CF 7 a L ) 06 G /8 A RHZ06LREDOMD G /4 A RHZ08LREDOMD G /4 A RHZLREDOMD G /8 A RHZ2LREDOMD G /2 A RHZ5LREDOMD G /2 A RHZ8LREDOMD G /4 A RHZ22LREDOMD G A RHZ28LREDOMD G /4 A RHZ5LREDOMD G /2 A RHZ42LREDOMD S 4 ) 06 G /4 A RHZ06SREDOMD G /4 A RHZ08SREDOMD G /8 A RHZSREDOMD G /8 A RHZ2SREDOMD G /2 A RHZ4SREDOMD G /2 A RHZ6SREDOMD G /4 A RHZ20SREDOMD G A RHZ25SREDOMD G /4 A RHZ0SREDOMD G /2 A RHZ8SREDOMD ) L = light series; 4 ) S = heavy series P Steel, zinc plated, Cr(VI)-free CF RHZ06LREDOMDCF NBR Stainless steel 7 RHZ06LREDOMD7 VIT P5
8 RHV-M-ED Non return valve EO 24 cone end / Male metric thread ED-seal (ISO 9974) X) Eolastic sealing D PN (bar) ) CF 7 CF 7 CF 7 Weight Series T DN DN D L L L2 L L4 S S2 S2 S g/ piece Order code* CF 7 a L ) 06 M RHV06LMEDOMD M RHV08LMEDOMD M RHVLMEDOMD M RHV2LMEDOMD M RHV5LMEDOMD M RHV8LMEDOMD M RHV22LMEDOMD M RHV28LMEDOMD M RHV5LMEDOMD M RHV42LMEDOMD S 4 ) 06 M RHV06SMEDOMD M RHV08SMEDOMD M RHVSMEDOMD M RHV2SMEDOMD M RHV4SMEDOMD M RHV6SMEDOMD M RHV20SMEDOMD M RHV25SMEDOMD M RHV0SMEDOMD M RHV8SMEDOMD ) L = light series; 4 ) S = heavy series Steel, zinc plated, Cr(VI)-free CF RHV06LMEDOMDCF NBR Stainless steel 7 RHV06LMEDOMD7 VIT P6
9 RHZ-M-ED Non return valve Male metric thread ED-seal (ISO 9974) / EO 24 cone end X) Eolastic sealing D PN (bar) ) Weight Series T DN D L L2 L L4 S S2 S g/ piece Order code* CF 7 a L ) 06 M RHZ06LMEDOMD M RHZ08LMEDOMD M RHZLMEDOMD M RHZ2LMEDOMD M RHZ5LMEDOMD M RHZ8LMEDOMD M RHZ22LMEDOMD M RHZ28LMEDOMD M RHZ5LMEDOMD M RHZ42LMEDOMD S 4 ) 06 M RHZ06SMEDOMD M RHZ08SMEDOMD M RHZSMEDOMD M RHZ2SMEDOMD M RHZ4SMEDOMD M RHZ6SMEDOMD M RHZ20SMEDOMD M RHZ25SMEDOMD M RHZ0SMEDOMD M RHZ8SMEDOMD ) L = light series; 4 ) S = heavy series P Steel, zinc plated, Cr(VI)-free CF RHZ06LMEDOMDCF NBR Stainless steel 7 RHZ06LMEDOMD7 VIT P7
10 RHDI Non return valve Female BSPP thread (ISO 79-) / Female BSPP thread (ISO 79-) PN (bar) ) Weight Series T DN D L L2 L S S2 g/ piece Order code* CF 7 L ) G / RHDI/ G / RHDI/ G / RHDI/ G / RHDI/2 5 5 G / RHDI/ G RHDI G / RHDI/ G / RHDI/ ) L = light series Steel, zinc plated, Cr(VI)-free CF RHDI/8CF NBR Stainless steel 7 RHDI/87 VIT P8
Directional Control Valves
Directional Control Valves Operating pressure: Flow rate: 3-chamber, electrically controlled 4/3- or 4/2-way directional control valve. Direct-activated by solenoids with screwed-in wet pin armature. Standard
Ermeto Original Rotary fittings
Ermeto Original Rotary fittings Visual index EO rotary fittings DG 0 DG 02-R DG 02-M p. P6 p. P7 p. P8 EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end
Ermeto Original Rotary fittings
Ermeto Original Rotary fittings Visual index EO rotary fittings DG 0 DG 02-R DG 02-M p. P6 p. P7 p. P8 EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end
Hydraulic Valves. Experience plus ideas
Hydraulic Valves Experience plus ideas Contents Type/Page Product information Hydraulic valves Function description Non-return valves Pg. 271 Non-return valves Pg. 272-273 RHD RHDI RHV RHZ Function description
SensoControl Test Points Diagnostic- Test equipment Industrial Products
Test Points Diagnostic- Test equipment Industrial Products Parker Visual index Series 1 Test point fi tting with pin-lock EMA1 GMA1 VKA1 p. Q4 p. Q5 p. Q6 Series 3 Test point with threaded connection M
Check Valve, Model : RHD/RHZ/RHV/RHF
escription Poppet type valves. Allows free flow from port A to and offer leakage free closure in opposite direction. Four basic models : RH, RHZ, RHV and RHF Seven standard sizes : N, N 8, N 1, N 15, N,
Check Valve, Model : RHD/RHZ/RHV/RHF
heck Valve, Model : RH/RHZ/RHV/RHF Ref. No : H8 Release Jan (imensions in mm) escription Poppet type valves. Allows free flow from port A to and offer leakage free closure in opposite direction. Four basic
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
3- and 4-Way Ball Valves KH3/KH4
3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an
10 Pressure/temperature measurement SCPT analogue
10 Pressure/temperature measurement SCPT analogue Pressure/temperature measurement SCPT analogue Robust stainless steel design Response times of 1 ms Capturing of pressure peaks Accuracy ±0.5 % Fast response
Hygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
Series P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
A Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) 1) Male thread
M.3 0166 Diaphragm pressure switches with M3 screw terminal Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) Adjustment range tolerance at room temperature
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
Diaphragm pressure switches up to 42 V with brass housing. Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) 1) Male thread
0167 Diaphragm pressure switches with brass housing Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) Adjustment range tolerance at room temperature Male thread NO : NC : 36 Screw
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
1/4 BSPP. 500 psi / 35 bar) psi / 35 bar) 8 018X XXX 03 X XXX
0186 / 0187 Diaphragm / piston pressure switches up to 250 V with stainless steel housing M.4 Stainless steel housing (AISI 303 / 1.4305) Snap action with silver contacts Overpressure safety up to 4,350
2018 High Performance Check Valves for liquid and gaseous media
2018 High Performance Check Valves for liquid and gaseous media Check valves Catalogue 45 Date: 04/2018 WEH - We Engineer Hightech All rights reserved, WEH GmbH 2018. Unauthorized copies are strictly forbidden
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
Seal: NBR. Silicone-free. Regulations. DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 97/23/EC (PED)
Non-Return Valves Non-return valves allow compressed air to flow in one direction and prevent it from flowing in the other. Fitted upstream of the circuit to be protected, they provide total protection.
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
Ferulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
DMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial
Pressure/temperature/RPM measurement
Pressure/temperature/RPM measurement Pressure/temperature/RPM measurement Various sensors are available depending on the measurement requirements. Pressure sensors, type SCP Robust stainless steel design
Solenoid valves VZWP, servo-controlled
Key features and overview Function The solenoid valve VZWP-L- is a servo-controlled 2/2-way valve with solenoid coil. The solenoid valve is closed when de-energised. When energised, the differential pressure
DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up
DMP 331 DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
TEMATEC GmbH Postal address: House address Fon (+49) 0 4-870-0 Postbox 6 Löhestr. 7 Fax (+49) 0 4-870-0 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@tematec.de TEMATEC GmbH Data Sheet DMP
SUITABLE FOR. Liquids. Air, gases and vapours. Steam EXAMPLES OF USE APPROVALS. Requirements AD 2000 Data sheet A2 TRD 421 DIN EN ISO
Type test approved safety valves angletype for industrial applications Series 652 3.4 652 Safety valves made of gunmetal, angletype with threaded connections SUITABLE FOR Liquids neutral Air, gases and
LF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
FLOW SWITCHES AND COMBINATION CONTROLS
6 ULTIMHEAT FLOW SWITCHES AND COMBINATION CONTROLS The professional solution: an extended, rational, and consistent range of products Technical catalogue for R&D department Edition 28/05/2013 E-Mail :
2/2-Way Pressure Relief Valve CX DBV (Right-Angle Design)
2/2-Way Pressure Relief Valve CX DBV (Right-Angle Design) CX DBV-E Model code (also example order) CX DBV 12 120 G1 F P 24V Type CX DBV = Pressure relief valve Nominal size 10 = DN 10 12 = 15 = 20 = CX
NON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters
P r e s s u r e i M o n i t o r i n g P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters TRADITION AND INNOVATION From a mechanical workshop to an international industrial
SERIES: VLS. INTERCHANGE: With similar couplings MAIN APPLICATIONS. Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant
INTERCHANGE: With similar couplings MAIN APPLICATIONS Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant VLS series is the screw to connect coupling with poppet style valving,
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
Explosion-Protected Pressure Switches
Explosion-Protected Pressure Switches To new ATEX Standard TECHNICAL DATA 0165 0340 0341 Degree of protection: IP 65 ATEX protection zone: 1 22 22 Switching power: 1 A / 250 VAC 0.25 A / 250 VDC 2 A /
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 bar up to 0... 600
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
Flanged Ball Valves KHBF / KHMF / KHMFF
Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)
Series 812. TÜV/CE atmospheric discharge safety valves for industrial applications. Air, gases and vapours
TÜV/CE atmospheric discharge safety valves for industrial applications Series 812 4.4 812 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases and vapours
0190 / Tolerance in psi (bar) at room temperature. Adjustment range in psi (bar) psi. ± 2.90 psi. (± 0.2 bar) (0.3-1.
0190 / 0191 Diaphragm / piston pressure switches up to 24 V with gold contacts Zinc-plated steel (CrVI-free), with spade terminal Snap action with gold contacts Overpressure safety up to 1,450 / 4,350
Low Pressure Series KL
Low Pressure 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006
BALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm
Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
EO and EO-2 Metric Bite Type Fittings
and -2 Metric Bite Type Fittings The Fitting Authority Catalog 4300 Nuts, Sleeves, Locknut, Inserts M FM DPR D PSR Nut Functional Nut Progressive Ring Cutting Ring Progressive Ring F13 F14 F13 F13 F13
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 40
Adjustment range. Seal material. Pressure connection
0520 Order matrix for electronic pressure switches.3 Type Adjustment range Pressure connection Seal material lectrical connection Type lectronic pressure switch 0520 Adjustment range 1) for NO 0 145 psi
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. Pressure Fittings. Other Function Fittings.
Function Fittings Flow Control Regulators Piloted Function Fittings Non-Return Valves Pressure Fittings Other Function Fittings Silencers Function Fittings 4-3 Function Fittings Flow Control Regulators
Valves. Valves Range 1340 Double Check Valves PN16. Material Specification
Valves Range 1340 Double Check Valves PN16 Material Specification 1340-1/2" - 2" No Component Material Specification 1 Body DZR Brass BS EN 12164 CW602N 2 Check Spool Acetal Acetal 3 Retaining Ring Nylon
Complete Hydraulic Set System 100
Diagnostics System 100 Measuring-System System 100 Technical The design of the Tema System 100 allows the check of static and dynamic pressures as well as vacuum. With the integrated self-venting device
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
Quick Coupling Products Distribution. Catalogue 3800-DS/UK
Quick Coupling Products Distribution Catalogue 38-DS/UK For your safety! Under certain circumstances, quick couplings can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks.
Flow Control Valves and Flow Control Valves with reverse flow check DV/DRV
Flow Control Valves and Flow Control Valves with reverse flow check DV/DRV up to 350 bar up to 300 l/min 1. DESCRIPTION 1.1. GENERAL HYDAC flow control valves and flow control valves with reverse flow
VFS 90 (ORFS) Flare tube fitting
according to SAE J1453 and ISO 8434-3 For various tube wall thicknesses in metric or inch dimensions Quick, easy and safe installation Radial installation of the tube Captive/soft seal High nominal pressures
Hydraulic Piston Accumulators
1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas (nitrogen) is utilised in hydropneumatic accumulators for storing
Series 46 Self-operated Regulators Differential Pressure and Flow Limiters Type 46-5 Type 46-6
Series 46 Self-operated Regulators Differential Pressure and Flow imiters Type 46-5 Type 46-6 Application Differential pressure and flow limitation for district heating systems with indirect connection,
F269B+ HYGIENIC BALANCED DOUBLE SEAL VALVES REVERSIBLE ACTUATOR TYPE PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE)
PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) F269B+ HYGIENIC BALANCED DOUBLE SEAL VALVES REVERSIBLE ACTUATOR TYPE FOOD & BEVERAGE PROCESS SOLUTIONS PROCESS VALVE TECHNOLOGY PENTAIR HYGIENIC PROCESS
Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
Servo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT Valve program for small and medium flows: VDHT 3/8 E 2/2 VDHT 1/2 E 2/2 VDHT 3/8 EA 2/2 VDHT 1/2 EA 2/2 Valve program
Check valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.
Check valve series SHCV, SOCV, SOACV, SACV HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard
Volume flow measurement
Volume flow measurement Volume flow measurement Turbine flow meter, type SCFT Lower fl ow resistance Built-in measurement connections for pressure and temperature Very simple installation into a hydraulic
up to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE
up to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE 1. DESCRIPTION 1.1. GENERAL HYDAC fluid level gauges FSA, fluid level sensors FSK
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
950x. Description. Part List
Via Circonvallazione, 308 Valduggia (VC), Italy Tel: +39 063 4789 Fax: +39 063 47895 950x Variable Orifice Bronze Double Regulating Valve valvoindustria ing.rizzio s.p.a. Description Variable orifice bronze
2/2-way and 3/2-way Normally Closed (NC) and Normally Open (NO)
Series CFB solenoid valves /-way and 3/-way Normally Closed (NC) and Normally Open (NO)»» Solenoid valves for air and water»» Great reliability over time, even in heavy working conditions The valve function
VALVES WITH UM ELECTRIC ACTUATOR
505-507 VALVES WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 505+UM and 507+UM cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
3-Port Seat Valves with Male Thread, PN 16
6 3-Port Seat Valves with Male Thread, PN 6 VXG ronze CC9K (Rg5) valve body DN 5DN 0 k vs 02525 m 3 /h Flat sealing connections with external thread G to ISO 228/ Sets of ALG 3 screwed fittings with threaded
Chapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
DMK 331P DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.
TEMATEC GmbH Postal address:: Postbox 6 House address Löhestr. 7 5759 Hennef 577 Hennef Fon (+49) 0 4-87 0-0 Fax (+49) 0 4-87 0-0 http: // www.tematec.de e-mail: team@ tematec.de TEMATEC GmbH Data Sheet
check Butterfly valves soft seated Butterfly valves Ptfe seated Butterfly valves for hot air/smokes double eccentric Butterfly valves BOLOGNA
check valves check valves disc CheCk valves series GA - GB - Gh - GN - GT swing CheCk valves series Gs swing check valves series gs bi-directional type swing check valves series gs dimensions from 2 to
SUITABLE FOR. Liquids. gases and vapours. Steam EXAMPLES OF USE APPROVALS
Type test approved safety valves angle-type for industrial applications 3.2 851 Safety valves made of gunmetal, angle-type with threaded connections Series 851 SUITABLE FOR Liquids neutral and non-neutral
Diaphragm/piston pressure switches 250 V
0186/ 0187 Diaphragm/piston pressure switches 250 V www.suco.de Stainless steel (1.4305) body With changeover switch and silver contacts Max. voltage 250 V, overpressure safe to 300/600 bar *) See page
MULTI-K TOP COAT MULTI-COUPLING MULTI COUPLING. Tailor-made according to customer s needs Compact, reliable and safe PATENT PENDING
MULTI-K MULTI-COUPLING TOP COAT 107 PATENT PENDING DN 10 to 19 Tailor-made according to customer s needs Compact, reliable and safe 250 bar General features: ARGUS multi-couplings, which consist of a fixed
Safety break-away couplings Breaking bolt series
Safety break-away couplings Breaking bolt series 1 How it works before and after emergency disconnect The SBCouplings, safety break-away couplings has three external break bolts. In the case of axial tension
2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
Thermoplastic Hoses. Polyflex/Parflex. Polyflex Presto
Thermoplastic Hoses Motors Valves Actuators Accumulators Filtration Polyflex/Parflex Thermoplastic Hoses for Hydraulic Applications Polyflex Presto Tubing for Pneumatics For pressures up to 700 bar. Single
SUITABLE FOR. Wasserdampf. Steam EXAMPLES OF USE APPROVALS. Requirements PED 2014/68/EU. Classification society
Overflow and pressure control valves Series 618 6.4 618 Overflow and pressure control valves made of gunmetal, angle-type with threaded connections SUITABLE FOR Liquids neutral and non-neutral Air, gases
ay Manifold Mounted KHP3K
3-Way ay Manifold Mounted Ball Valves KHP3K up to 500 bar up to DN 32 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, FLUTEC 3/2-way manifold mounted ball valves are units for shutting off and diverting
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 459 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
HIGH PRESSURE - pumps
Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group
VALVES WITH UV ELECTRIC ACTUATOR
505-507 VALVES WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 505+UV and 507+UV cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
Instrumentation Quick-Connects
Instrumentation Quick-Connects SQC SERIES Features Simple push-pull action to connect and disconnect lines - no tools required. Plug and body are available valved or unvalved. Valves automatically open
LIQUIfit Push-In Fittings
LIQUIfit Push-In Fittings This "eco-designed" range proposes an innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed. These fittings ensure
Test Coupling with Ball Check
Test 15 Connection Tread Introduction SMK15 Test Coupling wit Ball Ceck Test Coupling SMK15 Internal Ball Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast coupling for Monitoring
TECHNICAL CATALOGUE BALL VALVES: VIENNA
TECHNICAL CATALOGUE BALL VALVES: STANDARD LOW BALL VALVES: Suitable for domestic water ServiceS, heating, airconditioning plants and compressed air SyStemS. BALL VALVES 116 BALL VALVE, STANDARD LOW size
SUITABLE FOR. Liquids. Air, gases and vapours. Steam EXAMPLES OF USE APPROVALS
Type test approved safety valves angle-type for industrial applications Series 851 3.2 851 Safety valves made of gunmetal, angle-type with threaded connections SUITABLE FOR Liquids neutral and non-neutral
3-Port Seat Valves with Male Thread, PN 16
4 463 3-Port Seat Valves with Male Thread, PN 16 VXG41 Use Media Bronze CC491K (Rg5) valve body DN 15DN 50 k vs 1640 m 3 /h Flat sealing connections with external thread G B to ISO 228/1 Sets of ALG 3
Quick Coupling Products. Catalogue 3800-IND/UK
Quick Coupling Products Catalogue 3800-IND/UK For your safety! Under certain circumstances, quick couplings can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. Only
Ball valves and shut off valves
Shut off valves HE Hand slide valves W Ball valves QH, manually actuated Ball valves VAPB, mechanically actuated Ball valves VAPB CR, mechanically actuated, corrosion resistant 2003/10 Subject to change