Standard Cartridge Valves 2/2 Way Series NG16 NG100
|
|
|
- Geraldine Taylor
- 6 years ago
- Views:
Transcription
1 Standard Cartridge Valves / Way Series NG NG
2 Table of Contents Designation Symbol Page General Description and Operating Principle Specifications and Characteristic Parameters Typical Characteristic Curves - -way cartridge for Pressure Control without Damping -way cartridge for Pressure Control with Damping -way cartridge for Direction and Flow Control without Damping -way cartridge for Direction and Flow with Damping -way cartridge for Check Valve -way cartridge for Pressure Reducing and Compensator P P P P Typical Orifice Characteristics Mounting Dimensions Ordering Information -
3 General Description and Operating Principle General Description Cartridge valves, also known as / way valves or logic valves, conform to DIN and ISO standards.they have two operational ports and.the flow path between these two connections is controlled hydraulically by a pilot pressure applied to. Depending on the control input, cartridge valves can be used as: Directional Control Valves (start, stop, directional control) Pressure Control Valves (pressure relief, pressure control, pressure sequence and unloading function) Check Valves (check valve function and pilot operated check valve function) Flow Control Valves The preferred mode of mounting is the manifold block, which can be equipped with several valves depending on the hydraulic circuit for the specific application. Each valve is connected to each other in the manifold block. The Moog Hydrolux product line contains valves of nominal bores,,,,,, and as per DIN, for flows up to, lpm and sizes, for flows to, lpm. Moreover, Moog Hydrolux offers cover plates and pilot valves for a wide variety of functions. In addition to this, our product offering also contains cartridge housings for a great number of applications for subplate, pipe and flange mounting. Operating Principle Cartridge valves have two working connections and, where the main flow is hydraulically operated by a controlling pressure applied to the connection.the basic cartridge valve includes a valve poppet and sleeve which is normally held in the closed position by a spring.the poppet valve has a seated cone, giving a leakage free (dependent upon pilot control) condition across the two ports.the closing spring is retained by the control cover which encloses the cartridge valve and provides pilot connections from the port.various types of pilot control can be mounted either to the control cover or to an adjacent manifold face to provide direct control of the cartridge valve. The effective areas of the basic element are, and. Pilot oil can be taken from port, or both and (with a shuttle valve) or an external source. Hydraulic fluid can flow through the way cartridge valve from or. pilot valve can be used to directly control the switching function of the cartridge valve, either between two extreme positions, open or closed, or in any number of intermediate positions.the exact position of the valve cone depends on the ratio of control surface, to the pressures acting from the working connections and on the seating surface of and the annular area of. If the valve cone is open, by reducing the pressure seen at, then flow can move from and or vice-versa. y applying a control pressure at, the working connections to are shut off as the valve cone is closed by the seat mounting. If there is a pressure difference between connection and pilot connection, as a result of clearance tolerance between the cone and sleeve, then leakage can be eliminated by using a leakproof seat valve and hooking up the pilot connection to the working connection. If the desired function does not permit such a switching operation, a cartridge valve with an additional sealing surface can be used to seal the connections, and from each other.
4 Specifications General Data Value Unit Specifications Mode of Construction - - /-way Seat Valve (Cartridge) Mounting position - - any Manner of Mounting - - Manifold Cartridge Mounting Mounting Dimensions - mm see page Direction of flow - - see pages to mbient Temperature Range min. C - max. C + Hydraulic Inlet min. bar max. bar Outlet min. bar max. bar Temperature Range min. C - max. C + Viscosity Range min. mm s - [cst], max. mm s - [cst] Operational Viscosity mm s - [cst] Nominal Size - - N N N N N N N N Pilot Volume (rea ) for Cone, C & R V cm,,,,,,,, Pilot Volume (rea ) for Cone & D V cm,,,,,,,, Characteristic Parameters Reference Surface NG NG NG NG NG NG NG NG Cones, C and R Stroke mm mm (Ref),,,,,,,,,,,, Cones and D,,,,,, Stroke mm,,,,,,, mm (Ref) / / / / / / / /,
5 Performance Data Pressure Control Function CONE-, WITHOUT DMPENING NOSE CONE-, WITHOUT DMPENING NOSE NG NG NG PRESSURE DROP psi NG NG NG CONE-, WITHOUT DMPENING NOSE CONE-D, WITH DMPENING NOSE NG NG NG NG NG NG CONE-M,N, SPOOL TYPE CONE-M,N, SPOOL TYPE PRESSURE DROP (bar) NG - R SPRING NG - R SPRING NG - R SPRING NG - R SPRING PRESSURE DROP (bar) NG - R SPRING NG - R SPRING NG - R SPRING NG - R SPRING
6 Performance Data Flow; Direction and Check Functions CONE-/R, WITHOUT DMPENING NOSE CONE-/R, WITHOUT DMPENING NOSE NG NG NG NG NG NG CONE-/R, WITHOUT DMPENING NOSE CONE-C, WITH DMPENING NOSE NG NG NG NG NG CONE-C, WITH DMPENING NOSE CONE-C, WITH DMPENING NOSE NG NG NG NG NG
7 Standard Models Pressure Control (without Dampening nose); area ratio = : Flow Direction Size Weight Spring * Symbol Function Rating Part Part NG [mm] [kg] [bar] Designation Number, M-CEEP/KO;DG C--,, M-CEES/KO;DG C--, M-CEET/KO;DG C--, M-CEEU/KO;DG C--, M-CEEP/KO;DG C--., M-CEES/KO;DG C--, M-CEET/KO;DG C--, M-CEEU/KO;DG C--.,.., M-CEEP/KO;DG C--, M-CEES/KO;DG C--, M-CEET/KO;DG C--, M-CEEU/KO;DG C--, M-CEEP/KO;DG C--, M-CEES/KO;DG C--, M-CEET/KO;DG C--, M-CEEU/KO;DG C--, M-CEEP/KO;DG C--, M-CEES/KO;DG C--, M-CEET/KO;DG C--, M-CEEU/KO;DG C--, M-CEEP/KO;DG C--, M-CEES/KO;DG C--, M-CEET/KO;DG C--, M-CEEU/KO;DG C--, M-CEEP/KO;DG C--, M-CEES/KO;DG C--, M-CEET/KO;DG C--, M-CEEU/KO;DG C--, M-CEEP/KO;DG C--, M-CEES/KO;DG C--, M-CEET/KO;DG C--, M-CEEU/KO;DG C-- *, bar spring on request!
8 Standard Models Pressure Control (with dampening nose); area ratio = : Flow Direction Size Weight Spring * Symbol Function Rating Part Part NG [mm] [kg] [bar] Designation Number, M-CEEDP/KO;DG C--,, M-CEEDS/KO;DG C--, M-CEEDT/KO;DG C--, M-CEEDU/KO;DG C--, M-CEEDP/KO;DG C--,, M-CEEDS/KO;DG C--, M-CEEDT/KO;DG C--, M-CEEDU/KO;DG C--, M-CEEDP/KO;DG C--,, M-CEEDS/KO;DG C--, M-CEEDT/KO;DG C--, M-CEEDU/KO;DG C--,, M-CEEDP/KO;DG C--, M-CEEDS/KO;DG C--, M-CEEDT/KO;DG C--, M-CEEDU/KO;DG C--, M-CEEDP/KO;DG C--,, M-CEEDS/KO;DG C--, M-CEEDT/KO;DG C--, M-CEEDU/KO;DG C--, M-CEEDP/KO;DG C--,, M-CEEDS/KO;DG C--, M-CEEDT/KO;DG C--, M-CEEDU/KO;DG C--, M-CEEDP/KO;DG C--, M-CEEDS/KO;DG C--, M-CEEDT/KO;DG C--, M-CEEDU/KO;DG C--, M-CEEDP/KO;DG C--, M-CEEDS/KO;DG C--, M-CEEDT/KO;DG C--, M-CEEDU/KO;DG C-- *, bar spring on request!
9 Standard Models Directional Control (without dampening nose); area ratio = :, Flow Direction Size Weight Spring * Symbol Function Rating Part Part NG [mm] [kg] [bar] Designation Number, M-CEEP/KO C--,, M-CEES/KO C--, M-CEET/KO C--, M-CEEU/KO C--, M-CEEP/KO C--,, M-CEES/KO C--, M-CEET/KO C--,,,,, M-CEEU/KO C--, M-CEEP/KO C--, M-CEES/KO C--, M-CEET/KO C--, M-CEEU/KO C--, M-CEEP/KO C--, M-CEES/KO C--, M-CEET/KO C--, M-CEEU/KO C--, M-CEEP/KO C--, M-CEES/KO C--, M-CEET/KO C--, M-CEEU/KO C--, M-CEEP/KO C--, M-CEES/KO C--, M-CEET/KO C--, M-CEEU/KO C--, M-CEEP/KO C--, M-CEES/KO C--, M-CEET/KO C--, M-CEEU/KO C--, M-CEEP/KO C--, M-CEES/KO C--, M-CEET/KO C--, M-CEEU/KO C-- * bar spring on request!
10 Standard Models Directional Control (with dampening nose); area ratio = :, Flow Direction Size Weight Spring * Symbol Function Rating Part Part NG [mm] [kg] [bar] Designation Number, M-CEECP/KO C--,, M-CEECS/KO C--, M-CEECT/KO C--, M-CEECU/KO C--, M-CEECP/KO C--,, M-CEECS/KO C--, M-CEECT/KO C--, M-CEECU/KO C--,, M-CEECP/KO C--, M-CEECS/KO C--, M-CEECT/KO C--, M-CEECU/KO C--,, M-CEECP/KO C--, M-CEECS/KO C--, M-CEECT/KO C--, M-CEECU/KO C--, M-CEECP/KO C--,, M-CEECS/KO C--, M-CEECT/KO C--, M-CEECU/KO C--, M-CEECP/KO C--,, M-CEECS/KO C--, M-CEECT/KO C--, M-CEECU/KO C--, M-CEECP/KO C--, M-CEECS/KO C--, M-CEECT/KO C--, M-CEECU/KO C--, M-CEECP/KO C--, M-CEECS/KO C--, M-CEECT/KO C--, M-CEECU/KO C-- * bar spring on request!
11 Standard Models Check Valve; area ratio = :, Flow Direction Size Weight Spring * Symbol Function Rating Part Part NG [mm] [kg] [bar] Designation Number, M-CEERP C--,, M-CEERS C--, M-CEERT C--, M-CEERU C--, M-CEERP C--,, M-CEERS C--, M-CEERT C--, M-CEERU C--,, M-CEERP C--, M-CEERS C--, M-CEERT C--, M-CEERU C--,, M-CEERP C--, M-CEERS C--, M-CEERT C--, M-CEERU C--, M-CEERP C--,, M-CEERS C--, M-CEERT C--, M-CEERU C--, M-CEERP C--,, M-CEERS C--, M-CEERT C--, M-CEERU C--, M-CEERP C--,, M-CEERS C--, M-CEERT C--, M-CEERU C--, M-CEERP C--,, M-CEERS C--, M-CEERT C--, M-CEERU C-- * bar spring on request!
12 Standard Models Pressure Reducing & compensator (spool type), normally open; area ratio = : Flow Direction P P Spring Symbol Function Size Rating Part Part NG [mm] [bar] Designation Number, M-CKEMT/K C--, M-CKEMU/K C--, M-CKEMT/K C--, M-CKEMU/K C-- Flow only P=>P, M-CKEMT/K C--, M-CKEMU/K C--, M-CKEMT/K C--, M-CKEMU/K C-- These CKE-Cartridge can be ordered only with the below covers! They are only compatible with these covers! Symbol Size Part Part Designation Number CCEWD/DM E-- CCEWD/DM E-- CCEWD/DM E-- CCEWD/DM E--
13 Typical Orifice Characteristics The function and switching velocity of a cartridge-valve can be influenced by changes in the metering-in and metering-out flow through the pilot lines.this is achieved by changing mounting orifices as required. The following diagram and table should be used for selecting the correct orifice diameter. Pressure Difference bar,,,, Orifice - Diameters [mm],,,,,, lpm Flow,,, Order Numbers for Orifices CEE E E E E E E E E Orifice Choice Plug Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Plug Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Orifice Mxx, Order Number Order example: Orifice Mxx, N Order Number: Viscosity : mm s - [cst] Oil temperature : C
14 Mounting Dimensions
15 Ordering Information Poppet Style Cartridge NG NG NG NG Designation O Ring Shore Seal Kit for Cartridge O Ring Shore ack-up Ring O Ring Shore ack-up Ring xial Seal Springs Spring P -, bar Spring R -, bar Spring S -, bar Spring T -, bar Spring U -, bar Spring V -, bar E E EF EF EF EF EF EF NG NG ** NG Order Number NG NG NG NG ** NG ** ** Not possible with stroke limiter H. Order example: O Ring Pos. for NG Order number: Spring, bar Pos. for NG Order number: EF
16 Ordering Information Spool Type Cartridge* M C K E M Mixed FPM/FKM+PUR (Standard) only FPM/FKM N NR Orifices / Plugs for Cone () K Without plug K With plug K With.mm orifice C Cartridge Valve Omit for Standard Cartridge HF High flow K Spool Type Mounting E Manifold mounting Spring Rate T, bar U, bar Size Nominal ore [NG] NG NG NG NG Serial Number M Normally open N Normally closed DIN * These Cartridge can be ordered only with the covers on page! Normally Open NG NG Normally Open NG Normally Closed NG NG Pos. Designation Order Number Normally Open Type NG NG NG NG ack-up Ring O-Ring xial Seal E E - - ack-up Ring O-Ring O-Ring ack-up Ring Springs a, bar EF EF EF EF b, bar EF EF EF EF Orifice CONSULT FCTORY
17 Notes
18 ustralia razil China Denmark England Finland France Germany India Ireland Italy Japan Korea Luxembourg Philippines Singapore Spain Sweden US MOOG HYDROLU S.àr.l., rue de l ciérie L- LUEMOURG Tel: (+) - Fax: (+) - administration@moog.lu //-
High Flow Cartridge Valves 2/2 Way Series NG16 NG100
High Flow Cartridge Valves 2/2 Way Series NG1 NG100 Table of Contents Designation Symbol Page General Description and Operating Principle 3 Sectional View Types of Cones and Sleeves 4 Specifications and
High Flow Cartridge Valves 2/2 Way Series NG16 NG100
High Flow Cartridge Valves 2/2 Way Series NG16 NG100 Table of Contents Designation Symbol Page General Description and Operating Principle 3 Sectional View and Types of Cones and Sleeves 4 Specifications
Differential Proportional Flow Control Valve DPCMEE 16 & 20
Differential Proportional Flow Control Valve DPCMEE 6 & 2 Table of Contents Designation Symbol Page General Description and Operating Principle 4 Specifications 5 Performance Data DPCMEE6 - CK; EK and
DENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C
DENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C 2/2-Way Function / Cavity conform to ISO 7368 (DIN 24342) Publ. 7 EN 5060 A FEATURES, DESCRIPTION FEATURES x High flow cartridges give highest
2-Way Spool Type Cartridge Valve (CKE) ISO 7368 NB16 - NB50
2-Way Spool Type Cartridge Valve Series D 2-Way Spool Type Cartridge Valve (CKE) ISO 7368 N16 - N50 General Description Cartridge valves, also known as 2-way valves or logic valves, conform to ISO 7368
Proportional Throttle Cartridge Valve PCME/PCLME NG16, 25, 32, 40, 50
Proportional Throttle Cartridge Valve NG16, 25, 32, 4, 5 OVERVIEW Section Page General Description 3 Specifications 4 Characteristic Curves 5-7 Mounting Dimensions 8-9 Dimensions 1-11 Standard Models 12
Integrated Hydraulic Manifold Systems
h Integrated Hydraulic Manifold Systems Manifold Systems Introduction After working with several key customers and understanding their needs for complete systems and sub-systems, I H M S Moog Hydrolux
G761 Series Servovalves ISO Size 04
G761 Series Servovalves ISO 137 Size 4 TWO STAGE SERVOVALVES G761 SERIES SERVOVALVES The G761 Series flow control servovalves are throttle valves for 3-, and preferably 4-way applications.they are a high
G761 Series Servovalves ISO Size 04
G761 Series Servovalves ISO 137 Size 4 TWO STAGE SERVOVALVES G761 SERIES SERVOVALVES The G761 Series flow control servovalves are throttle valves for 3- and preferably 4-way applications.they are a high
631 Series Servovalves ISO 4401 Size 05
631 Series Servovalves ISO 4401 Size 05 TWO STAGE SERVOVALVES 631 SERIES SERVOVALVES The 631 Series flow control servovalves are throttle valves for 3- and preferably 4-way applications.they are a medium
72 Series Servovalves
72 Series Servovalves TWO STAGE SERVOVALVES 72 SERIES SERVOVALVES The 72 Series flow control servovalves are throttle valves for 3 and preferably 4-way applications.they are a high performance, two-stage
D661-G...A Series Servovalve With Bushing and Integrated 24 Volt Electronics ISO 4401 Size 05
D661-G...A Series Servovalve With Bushing and Integrated 24 Volt Electronics ISO 4401 Size 05 OVERVIEW Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical Data 4 5 Performance Specs.
771, 772, 773 Series Servovalves
771, 772, 773 Series Servovalves TWO STAGE SERVOVALVES 771/2/3 SERIES SERVOVALVES The 771/2/3 Series flow control servovalves are throttle valves for 3- and preferably 4-way applications.they are a high
Pilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
ZRV. Direct Operated Check Valve Series ZRV (Denison)
Characteristics / Ordering Code Direct Operated Check Valve Series ZRV (Denison) Direct operated check valves series ZRV have a cartridge type insert to provide zero leakage and high life time. he check
2/2 Logic Cartridge Valve, Size 10
2/2 Logic Cartridge Valve, Size 10 Q max = 10 l/min, p max = 420 bar ctive Control, Seated Design, Soft Switching 1 Description ctive control Soft switching, or soft switching + snap action Seated valve
Directional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
Directional Control Valve
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. wide variety of spool options allows
Check valve, pilot operated. Type SV and SL. Features. Contents. RE Edition: Replaces:
Check valve, pilot operated Type SV and SL RE 68 Edition: 07-0 Replaces: 07-0 Size 0, 0, and Component series Maximum operating pressure 5 bar Maximum flow 550 l/min H5558 Features For subplate mounting
Pressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
ISO cartridge valves type LIDD and LIQV Flow control, ISO 7368 sizes 16 63
Table H004/E ISO cartridge valves type LIDD and LIQV Flow control, ISO 78 sizes LIDD LIQV/K LIDD and LIQV are flow control valves not compensated, in ISO cartridge design, made by a functional cover and
Pilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
RC /
3 Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly Technologies Pneumatics Service utomation Mobile Hydraulics 09.96 DZ 10,, 3 31 bar 600 L/min K 663- DZ 0 --/31M 1 3 6 7 DIN
Directional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS
Fluid Power Specialist Since 1948 LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS Copyright 2018, Almo Manifold & Tool Co. All rights reserved. All attempts have been made to make the information in
Chapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
Logic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Logic elements Differential pressure sensing elements for applications up to 50 bar (5000 psi) and 400 L/min (00 USgpm) Logic elements LOGC ELEMENTS... -4 APPLCATON
2/2 - way cartridge valve type URZS/S
/ - way cartridge valve type URZS/S NS, 0, 50 up to MPa up to 00 dm /min DT SHEET - SERVICE MNU NUL WK 1 0 07.01 PPLICTIN / way cartridge valve type URZS S can be used in hydraulic systems as a pilot operated
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
Pressure reducing valve, pilot operated Type DR
RE 6 9/0.0 Replaces: 0.0 Pressure reducing valve, pilot operated Type DR Nominal sizes 0 to Series Maximum operating pressure 0 bar Maximum flow 00 L/min K660-9 Type DR 0--/... Overview of contents Features
RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.
R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to
2/2 Logic Cartridge Valve, Size 10
2/2 Logic Cartridge Valve, Size 10 Q max = 10 l/min, p max = 420 bar ctive Control, Seated Design ctive control rea ratio 2 : 1 High flow rates with low p Seat-valve shut-off from and No pilot oil consumption
RE / Check-Q-meter type FD, series 2X. Ordering details FD 2X / V * Symbols 1/8. Replaces: 03.92
RE 1/09.9 1/03.9 Check-Q-meter type FD, series Sizes 1, 1,, 3 Up to 0 L/min Up to 30 bar RE 1/09.9 Replaces: 03.9 Features: For installation in manifolds (cartridge valve), With SE flanged ports, For sub-plate
RA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)
R 26 892/06.98 Pressure Reducing Valve, Pilot Operated Model DR (Series 5) Size 10 to 0... 5000 PSI (50 bar)... 105 GPM (400 L/min) R 26 892/06.98 Replaces: 05.94 Pilot operated pressure reducing valve
D680 Series Mini Direct Drive Valve Piloted Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 08
D68 Series Mini Direct Drive Valve Piloted Servo-Proportional Control Valves with Integrated Electronics ISO 441 Size 5 to 8 OVERVIEW Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical
Slip-in Cartridge Valves Series CE, CP. General Description. Features. Pilot Control for Directional Functions
General E, P and 2-way slip-in cartridge valves are hydraulically controlled seat valves that are designed for compact block installation. Slip-in cartridge, cover, and pilot system are valve elements
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi)
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi) Revised 2/93 GB C 2037 Table of Contents Model Code...................................................................................................
D691 Series PQ Servo-Proportional Valves with Integrated Electronics
D691 Series PQ Servo-Proportional Valves with Integrated Electronics SERVO-PROPORTIONL CONTROL VLVES PQ VERSION TWO STGE WITH D691 SERIES SERVO-PROPORTIONL VLVES The D691 servo-proportional control PQ-Valves
Check valve, pilot operated
Check valve, pilot operated RE 21460/07.05 Replaces: 06.02 1/8 Types SV and SL Size 6 Component series 6X Maximum operating pressure 315 bar Maximum flow 60 l/min H6090 Table of contents Contents Page
Vickers Counterbalance Valve. CB Series Mainfold Mounting 315 Bar SAE Flange Mounting L/min Subplate Mounting
Vickers Counterbalance Valve C Series ainfold ounting 315 ar SE Flange ounting 80-560 L/min Subplate ounting Table of Contents Counterbalance Valve General Description...2 Functional Symbols...2 odel Code...3
Pilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
Pilot operated check valve
/06 Pilot operated check valve 1.8 Type SV / SL6...L6X Size 6 Up to 315 bar Up to 60 L/min Contents Function and configurations 0 Symbols 0 Specifications 03 Technical data 03 Characteristic curves 0 Unit
Pressure sequence valve pilot operated
/6 Pressure sequence valve pilot operated.4 Type DZ...L Sizes to Up to bar Up to 6 L/min Contents Function and configuration Symbols Specifications Technical data 4 Characteristic curves 4 Unit dimensions
LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS
Fluid Power Specialist Since 1948 LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS Copyright 2019, Almo Manifold & Tool Co. All rights reserved. All attempts have been made to make the information in
2-way cartridge valve, actively controllable. Type LC2A. Features. Contents. RE Edition: Replaces:
-way cartridge valve, actively controllable Type LC RE 00 Edition: 0- Replaces: 03-0 Size 5 Component series X Maximum operating pressure 0 bar Maximum flow 7000 l/min ( p = 0 bar) H797+79 Features ctively
Priority valve LPS. Data sheet. Series 1 x
Priority valve LPS Data sheet Nominal sizes 40 160 Series 1 x Maximum flow 40 160 l / min HE 27548 / 10.2017 2 LPS HE 27548 / 10.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details
2-WAY SLIP-IN CARTRIDGE VALVES MONITORED ISO 7368 SIZES 16 TO 63
2-WY SLIP-IN CRTRIDGE VLVES MONITORED ISO 7368 SIZES 16 TO 63 FLOW-OPTIMIZED DESIGN FOR UP TO 420 R (6,000 PSI) OPERTING PRESSURE ND MXIMUM ENERGY EFFICIENCY Rev., January 2019 MOTION CONTROLLER What moves
MONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
Flow sharing control block in sandwich plate design M7-25
Flow sharing control block in sandwich plate design M7-25 RE 64297 Edition: 07.2016 Replaces: 06.2012 Size 25 Series 3X Maximum working pressure on the pump side 380 bar on the consumer side 420 bar Maximum
Pilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
Electrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1...
Electrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1... 3 l/min, 420 bar Two pressure valve, ON / OFF or HI / LO With internal pilot drain to
Check-Q-meter type FD
BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Check-Q-meter type FD Size 12,16,25,32 up to 31.5MPa up to 560 L/min RE27551/12.2004 Replaces RE27551/05.2001 Features: - Porting pattern to DIN 24 340,
Full Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
LOGIC ELEMENTS SERIES 10 LC* LP* /103 ED CARTRIDGE VALVES ISO DIN COVERS FOR CARTRIDGE VALVES ND
48 900/103 ED LC* LP* LOGIC ELEMENTS CARTRIDGE VALVES ISO 7368 - DIN 24342 COVERS FOR CARTRIDGE VALVES ND 16-25-32-40-50 p max 420 bar Q max (see performance ratings table) OPERATING PRINCIPLE Logic elements
DIRECTIONAL CONTROL (LD) DIRECTIONAL AND FLOW CONTROL (LD) SOLENOID OPERATED DIRECTIONAL
Pu. EC-01 DIRECTIONL CONTROL (LD) DIRECTIONL ND FLOW CONTROL (LD) SOLENOID OPERTED DIRECTIONL CONTROL (LDS) RELIEF (L) / SOLENOID CONTROLLED RELIEF (LS) VLVES Up to 31.5 MPa (4570 PSI), 5500 L / min (1453
Hydraulically pilot operated cartridge check valves Type RHC and RHCE without and with hydraulic pre-relief
Hydraulically pilot operated cartridge check valves RHC and RHCE without and with hydraulic pre-relief Pressure p max = 700 bar Flow Q max = 0 lpm Symbols RHC RHCE 1. General These devices are designed
Directional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
Directional Control Valve Series D3W (Parker), 4D02 (Denison)
Characteristics Series D3W (Parker), 4D0 (Denison) The direct operated directional control valve size NG10 is available with both Parker (series D3W) and Denison (series 4D0) model codes. Both series are
Hydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit
Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style
Filling valve sandwich plate
Filling valve sandwich plate RE 0478/08. Replaces: 06.06 /4 Type ZSF and ZSFW Size to 00 Component series ; Maximum operating pressure 50 bar Flow up to 7000 l/min ( p = 0. bar) Table of contents Contents
VALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G
VALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G Valves range for open loop 2 18/07/2017 Valves range for open loop CONTENT CHECK VALVES 5 Direct operated valves 7 Pilot operated valves 11 Counterbalance
LUDV control block in mono block/sandwich plate design M7-20
LUDV control block in mono block/sandwich plate design M7-20 RE 64293 Edition: 06.2013 Replaces:. Size 20 Series 3X Maximum operating pressure On the pump side 380 bar On the actuator side 420 bar Maximum
Piston Pumps Series P2 / P3 Variable Displacement
Piston Pumps Series P2 / P3 Variable Displacement Catalogue HY11-2600/UK July 2003 Contents Series P2/P3 Description Technical information 3 Ordering code 4 Control options LA and LB 6 Control options
2-way flow control valve
-way flow control valve RE 8155/11.10 Replaces: 11.0 1/8 Type FRM Sizes 6 and 10 Component series 1X Maximum operating pressure 315 bar Maximum flow 60 l/min H501 Overview of contents Contents Page Features
Proportional Pressure Reducing Valves Series PE*W (Parker), R4R (Denison)
Characteristics / Technical Data Series PE*W (Parker), RR (Denison) Subplate mounted proportional pressure reducing valves are available with both Parker (series PE*W) and Denison (series RR) model codes.
Pilot operated pressure relief valve
0/06 ilot operated pressure relief valve.6 ype ZD/ ZD 6V..L4X Size 6 up to 5bar up to 60 L/min Contents Function and configuration 0 Symbols 0 Specification 0 echnical data 0 Characteristic curves 0 Unit
Check Valves. VC Series - Cartridge Mounting 500 Bar. Innovative Fluid Power. Bulletin 86624
VC Series - Cartridge Mounting 500 ar Innovative Fluid Power ulletin 86624 Issue 1.0 02.2010 VCC 500 ar General Information Check Valve with Standard Top Cap Section View with Standard Poppet Maximum Working
Proportional pressure relief valve, pilot operated, with on-board electronics (OBE) and position feedback
Proportional pressure relief valve, pilot operated, with on-board electronics (OBE) and position feedback RE 29159/07.05 1/10 Type DBEBE6X Nominal size 6 Unit series 1X Maximum working pressure P 315 bar,
D633/D634 SERVOVALVES FOR ELECTROHYDRAULIC POSITION, VELOCITY, PRESSURE OR FORCE CONTROL SYSTEMS WITH HIGH DYNAMIC RESPONSE REQUIREMENTS
SERVOVALVES DIRECT DRIVE SERVOVALVES D633/D634 SERVOVALVES FOR ELECTROHYDRAULIC POSITION, VELOCITY, PRESSURE OR FORCE CONTROL SYSTEMS WITH HIGH DYNAMIC RESPONSE REQUIREMENTS Rev. 2, 04/2009 ISO 4401 SIZES
Sectional Directional Control Valve RS 220
Sectional Directional Control Valve RS 0 RS 0 is a sectional open center valve designed for max. operating pressures up to 00 bar and max. pump flows up to 0 l/min. Technical data Pressure and flow values*
DIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 CONTENTS: RH06...1 - electrical control... RH06...2 - hydraulic control... Page 1/17...7/17 8/17...9/17 RH06...4 - mechanical control RH06...6 - pneumatic control......
Pressure relief valve, pilot-operated. Type DB and DBW. Features. Contents. RE Edition: Replaces:
ressure relief valve, pilot-operated ype D and DW RE 580 Edition: 017-0 Replaces: 016-1 Size 10 Component series 5 Maximum operating pressure 50 bar Maximum flow 650 l/min H6088+H6089 Features For subplate
Pressure Compensator Valves Series R5P (SAE Flange Mounted) General Description. Features
Technical Information General Description Series R5P direct operated, 3-way pressure compensators can be combined with any type of fixed or adjustable flow resistor (throttle) to provide a load compensated
Servo solenoid valves with positive overlap and on-board electronics
Servo solenoid valves with positive overlap and on-board electronics RE 29089/01.05 1/22 Replaces: 05.04 Type 4WRLE 10...35, symbols E./W. Nominal size 10, 16, 25, 35 Unit series 3X Maximum working pressure
Safety cartridge valves with poppet position monitoring
Table EY/E Safety cartridge valves with poppet position monitoring ISO standard, onoff, poppet type, conforming to Machine Directive //EC certified by LIFI*/NC 1 RNE OF VLVE S MODELS LID*/FV Inductive
Pressure reducing valve, pilot operated. Type DR. Features. Contents. RE Edition: Replaces: 02.03
Pressure reducing valve, pilot operated Type DR RE 293 Edition: 2013-01 Replaces: 02.03 Sizes 10 and 2 Component series 1X; 4X Maximum operating pressure 31 bar Maximum flow 10 l/min H792 Features Contents
Proportional Pressure Relief Valve Series RE*T
Characteristics The pressure relief valve series RE*T have a proportional solenoid operated pilot stage with integrated electronics and a cartridge main stage. Features Pilot-operated pressure relief valve
Check valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Check valves Direct and pilot operated check valve functions for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Check valves CHECK VALVES... -4 FPR -
NG06. General Size NG6 NG10 Design
Catalog HY14-255/US Series VY*K General Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application as both a sequence valve
2/2- way directional valve type URZS40 Cover of directional valve type ULZS40
2/2- way directional valve type URZS40 Cover of directional valve type ULZS40 NS40 up to 42 MPa up to 1600 DT SHEET - SERVICE MNU NUL dm /min WK 421 750 0.201 PPLICTIN 2-way, 2-position directional valve
LUDV control block of sandwich plate design
LUDV control block of sandwich plate design RE 64132/05.09 1/14 Replaces: 12.02 Type SX 10 Nominal size 10 Series 1X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar Inlet flow
HV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control
INDUSTRIL FLUID OWER COMONENTS ND SYSTEMS HV SERIES Manual/ roportional Directional Valves HV39 HV9 HV8 EHV39 Lever ctuated with Optional roportional Control 334 Friendship Drive, Magnolia, TX 77355 Tel.:
Rectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2016 Replaces: 06.2010 Technical data Description
WK /2 WAY CARTRIDGE VALVE TYPE URZS 16 COVER FOR CARTRIDGE VALVE TYPE ULZS 16. size 16 up to 42 MPa 140 dm 3 /min DESCRIPTION OF OPERATION
2/2 WAY CARTRIDGE VALVE TYPE URZS 16 COVER FOR CARTRIDGE VALVE TYPE ULZS 16 size 16 up to 42 MPa 140 dm 3 /min WK 450 950 04.1999r. 2/2 way cartridge valve type URZS 16 can be used to build hydraulic systems
Proportional Pressure Reducing Valve PDM08130
Proportional Pressure Reducing Valve PDM08130 up to 80 bar up to 10 l/min Cartridge valves Control electronics Connection housings 486 1. DESCRIPTION 1.1. GENERAL According to DIN-ISO 1219, HYDAC proportional
Check valve, pilot operated
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 46-5480 www.cmafh.com Check valve, pilot operated Type ZS Size 6 Component series 6X Maximum operating pressure
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 OVERVIEW Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical Data 4 5 Electronics
Open center control block in mono block design MO-16, 22, 32
Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:
Publ. 3-EN 2950-A. DENISON HYDRAULICS Pressure Relief Valve R6V
Publ. 3-EN 2950-A DENISON HYDRAULICS Pressure Relief Valve R6V FEATURES, SYMBOL FEATURES High Performance: R6V valves are designed for a maximum pressure of 350 bar and a flow capacity up to 650 l/min.
Heavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
D691 Series PQ Servo-Proportional Valves with Integrated Electronics
D691 Series PQ Servo-Proportional Valves with Integrated Electronics SERVO-PROPORTIONL CONTROL VLVES PQ VERSION TWO STGE WITH D691 SERIES SERVO-PROPORTIONL VLVES The D691 servo-proportional control PQ-Valves
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2018 Replaces: 03.2016 Technical data Description
Position-Monitored Active Cartridge
osition-monitored ctive Cartridge Model RSE - Series H Dimensions according to ISO 7368 Nominal size N16 to N100 What moves your world CONENS Moog osition-monitored ctive Cartridge Model RSE - Series
DIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 GENERAL DESCRIPTION RH0...1-...F... Document: DCVC3-1-Aug 2013 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction RH0...1-...F...
Check Valves, Size Spherical Poppet-type, Screw-in Design Series RKVE l/min, 350 bar (500 bar)
Check Valves, Size 04... 40 Spherical Poppet-type, Screw-in Design Series RKVE... 360 l/min, 350 bar (500 bar) 1 General 1.1 Product description Series RKVE units are screw-in check valves with mounting
Servo solenoid valves with on-board electronics (OBE)
Servo solenoid valves with on-board electronics (OBE) RE 29045/10.05 Replaces: 01.05 1/12 Type 5WRPE 10 Size 10 Unit series 2X Maximum working pressure P 1, P 2, A, B 210 bar, T 50 bar Nominal flow rate
PROPORTIONALADVANTAGE
Wide range of pressure and flow options True stepless control and low noise operation Long trouble free cycle life Minimal set up time High stable working closed loop system PROPORTIONALADVANTAGE 02 PROPORTIONAL