Max. Operating Pressure. Group 1

Transcription

1 HK Series (Steel) Hansen s HK Series coupling sets the industry standard for couplings. The HK Series features a rugged ball latch mechanism with automatic self-sealing poppet valves in a wide array of port configurations and multiple valved and non-valved configurations. Product Features Meets dimensional requirements to standard 724- Series The coupling that sets the industry standard Self-sealing poppet valve design provides excellent high and low pressure sealing Standard seal material: una-n Seal options available in PTF, Neoprene, FKM, PM, and Kalrez Standard body material: Zinc trivalent plated steel with stainless steel springs, balls and retaining rings. PTF back up rings in sockets (females) Physical Characteristics uropean Pressure quipment irective Couplings with nominal diameters up to and including 25 mm are designed and manufactured under rticle 4.3 of the uropean Pressure quipment irective 204/68/U. Couplings with nominal diameters greater than 25 mm are designed and manufactured in accordance with stipulations of Module of the uropean Pressure quipment irective 204/68/U. They should not be used to convey unstable gases. Group = Hazardous media / Group 2 = Other media Series ody Nominal Flow iameter Max. Operating Pressure Non hazardous Hazardous liquids & gases liquids & gases Group 2 Group Rated Flow* ir Inclusion (bar) (psi) (bar) (psi) (lpm) (gpm) cc. max. cc. max. HK , , HK ¼ , , HK , , HK ½ , , HK ¾ , , HK , , HK ¼** HK ½ HK 2½ * For questions related to vacuum please contact Guyson technical sales department. ** No Standard available for the 0HK pplications & Markets griculture Hydraulic Tool General Industry Construction Fluid Transfer Transportation Military Law nforcement/rescue Chemical Oil and Gas Consumer Products HVC Food and everage Trucks erospace Medical Flow ata Pressure drop (PSI) 72,5 58,0 43,5 29, ,25 4,35 2, Seal lastomer ata* Seal lastomer** una-n Neoprene PM FKM Hydraulic Oil viscosity : 30 Cst at 40 C / 04 F Flow rate (l/min) Flow rate (gpm) Max. Operation Temperature Range Fluid Loss -40 C to +2 C/40 F to +250 F -54 C to +00 C/-65 F to +22 F -54 C to +49 C/-65 F to +300 F -29 C to +204 C/-5 F to +400 F * For reference only, based on Guyson recommended temperatures. ** For seals not listed contact Guyson. Contact Guyson technical sales department for further information on fluid compatibility. Tel: leeds@guyson.co.uk web: ,5 0,3 0,2 0. Pressure drop (bar) bar

2 HK Series (Steel) Figure HK-8 Series ody Thread (Female) Fig. imensions NPTF SPP S Flats H H H6 ¼ 6.3 ¼ H6S ¼ ¼ H6 ¼ H H2S H ¾ HP26 ½ 2.5 ½ HP26S ½ ½ HP0 ½ HP3 ¾ 20 ¾ HP3S ¾ 20 - ¾ HP2 ¾ HP ½ HP36S HP =Overall Length, =Maximum iameter To obtain connected length of coupling, add dimensions (Fig. ) and (Fig. 3) together. Flats Figure 2 HK0/2/20 Series ody Thread (Female) Fig. imensions NPTF SPP 0H4* ¼ - ¼-½ H4S* ¼ - - ¼ H4 ½ 40 ¼ -½ H4S ½ 40 - ¼ H46 ½ 40 ½-½ H46S ½ 40 - ½ H5 2½ 50 2-½ H5S 2½ H56 2½ 50 2½ H56S 2½ 50-2½ H6 2½ H6S 2½ =Overall Length, =Maximum iameter * 724- Series does not include -¼ inch body size couplings; therefore, Series 0HK is not covered by this standard To obtain connected length of coupling, add dimensions (Fig. 2) and (Fig. 4) together. Tel: leeds@guyson.co.uk web:

3 HK Series (Steel) Figure 3 HK-8 Series ody Thread (Female) Fig. imensions NPTF SPP S C C K K K6 ¼ 6.3 ¼ K6S ¼ ¼ K6 ¼ K K2S K ¾ KP26 ½ 2.5 ½ KP26S ½ ½ KP0 ½ KP3 ¾ 20 ¾ KP3S ¾ 20 - ¾ KP2 ¾ KP ½ KP36S KP To obtain connected length of coupling, add dimensions (Fig. ) and (Fig. 3) together. HK0/2/20 Series ody Figure 4 Thread (Female) Fig. imensions NPTF SPP C C 0K4* ¼ - ¼-½ K4S* ¼ - - ¼ K4 ½ 40 ¼-½ K4S ½ 40 - ¼ K46 ½ 40 ½-½ K46S ½ 40 - ½ K5 2½ 60 2-½ K5S 2½ K56 2½ 60 2½ K56S 2½ 60-2½ K6 2½ K6S 2½ * 724- Series does not include -¼ inch body size couplings; therefore, Series 0HK is not covered by this standard To obtain connected length of coupling, add dimensions (Fig. 2) and (Fig. 4) together. ust Plugs and ust Caps ccessories Plug ust Cap Part No. Socket ust Plug Part No. Coupling Series Metal Vinyl Metal Vinyl HK PCHK* PPCHK SCHK* PSCHK 2HK PC2HK* PPC2HK SC2HK* PSC2HK 3HK PC3HK* PPC3HK SC3HK* PSC3HK 4HK PC4HK** PPC4HK(R)*** SC4HK** PSC4HK(R)*** 6HK PC6HK** PPC6HK(R)*** SC6HK** PSC6HK(R)*** 8HK PC8HK** PPC8HK(R)*** SC8HK** PSC8HK(R)*** 2HK PC2HK* SC2HK* 20HK PC20HK* SC20HK* Vinyl ust Plug Vinyl ust Cap Metal ust Cap Metal ust Plug *rass **luminum ***Offered in red by adding R to end of part number Tel: leeds@guyson.co.uk web:

4 HK Series (rass) Hansen s HK brass is a general purpose industrial interchange coupling available in valved or non-valved designs, offered in brass for excelllent corrosion resistance in rugged applications where stainless steel is unacceptable. The HK Series features a ball latch mechanism with automatic self-sealing poppet valves. Product Features Meets dimensional requirements to standard 724- Series rass construction with stainless steel springs for greater corrosion resistance and fluid compatibility Self-sealing poppet valves provide excellent high and low pressure sealing Standard seal material: una-n Seal options available in PTF, Neoprene, FKM, PM, and Kalrez uropean Pressure quipment irective Couplings with nominal diameters up to and including 25 mm are designed and manufactured under rticle 4.3 of the uropean Pressure quipment irective 204/68/U. Couplings with nominal diameters greater than 25 mm are designed and manufactured in accordance with stipulations of Module of the uropean Pressure quipment irective 204/68/U. They should not be used to convey unstable gases. Group = Hazardous media / Group 2 = Other media Physical Characteristics Series ody pplications & Markets griculture Hydraulic Tool General Industry Construction Fluid Transfer Chemical Oil and Gas Transportation Food and everage Trucks Nuclear Nominal Flow iameter Max. Operating Pressure Non hazardous Hazardous liquids & gases liquids & gases Group 2 Group Flow ata Pressure drop (PSI) 72,5 58,0 43,5 29, ,25 4,35 2, Hydraulic Oil viscosity : 30 Cst at 40 C / 04 F Rated Flow* Flow rate (l/min) Flow rate (gpm) ir Inclusion (bar) (psi) (bar) (psi) (lpm) (gpm) cc. max. cc. max. HK , , HK ¼ , , HK , , HK ½ , , HK ¾ , , HK ,500 03, HK ¼** , HK ½ , HK 2½ * For questions related to vacuum please contact Guyson technical sales department. ** No Standard available for the 0HK Fluid Loss Seal lastomer ata* Seal lastomer Max. Operation Temperature Range una-n -40 C to +2 C/40 F to +250 F Neoprene -54 C to +00 C/-65 F to +22 F PM -54 C to +49 C/-65 C to +300 F FKM -29 C to +204 C/-5 F to +400 F * For reference only, based on Guyson recommended temperatures. Contact Guyson technical sales department for further information on fluid compatibility. Tel: leeds@guyson.co.uk web: ,5 0,3 0,2 0. Pressure drop (bar)

5 HK Series (rass) Figure HK-8 Series ody Thread (Female) Fig. imensions NPTF SPP Flats H H6 ¼ 6.3 ¼ H6S ¼ ¼ H H2S HP26 ½ 2.5 ½ HP26S ½ ½ HP3 ¾ 20 ¾ HP3S ¾ 20 - ¾ HP ½ HP36S =Overall Length, =Maximum iameter To obtain connected length of coupling, add dimensions (Fig. ) and (Fig. 3) together. Flats HK0/2/20 Series ody Thread (Female) Fig. imensions NPTF SPP Figure 2 0H4* ¼ - ¼-½ H4 ½ 40 ¼-½ H4S ½ 40 - ¼ H46 ½ 40 ½ H46S ½ 40 - ½ H5 2½ 50 2-½ H5S 2½ H56 2½ 50 2½ H56S 2½ 50-2½ H6 2½ H6S 2½ =Overall Length, =Maximum iameter * 724- Series does not include -¼ inch body size couplings; therefore, Series 0HK is not covered by this standard To obtain connected length of coupling, add dimensions (Fig. 2) and (Fig. 4) together. Tel: leeds@guyson.co.uk web:

6 HK Series (rass) HK-8 Series ody Thread (Female) Fig. imensions NPTF SPP C K K6 ¼ 6.3 ¼ K6S ¼ ¼ K K2S KP26 ½ 2.5 ½ KP26S ½ ½ KP3 ¾ 20 ¾ KP3S ¾ 20 - ¾ KP ½ KP36S To obtain connected length of coupling, add dimensions (Fig. ) and (Fig. 3) together. Figure 3 C Figure 4 HK0/2/20 Series ody Thread (Female) Fig. imensions NPTF SPP C 0K4* ¼ - ¼-½ K4 ½ 40 ¼-½ K4S ½ 40 - ¼ K46 ½ 40 ½-½ K46S ½ 40 - ½ K5 2½ 50 2-½ K5S 2½ K56 2½ 50 2½ K56S 2½ 50-2½ K6 2½ K6S 2½ * 724- Series does not include -¼ inch body size couplings; therefore, Series 0HK is not covered by this standard To obtain connected length of coupling, add dimensions (Fig. 2) and (Fig. 4) together. C ust Plugs and ust Caps ccessories Plug ust Cap Part No. Socket ust Plug Part No. Coupling Series Metal Vinyl Metal Vinyl HK PCHK* PPCHK SCHK* PSCHK 2HK PC2HK* PPC2HK SC2HK* PSC2HK 3HK PC3HK* PPC3HK SC3HK* PSC3HK 4HK PC4HK** PPC4HK(R)*** SC4HK** PSC4HK(R)*** 6HK PC6HK** PPC6HK(R)*** SC6HK** PSC6HK(R)*** 8HK PC8HK** PPC8HK(R)*** SC8HK** PSC8HK(R)*** 2HK PC2HK* SC2HK* 20HK PC20HK* SC20HK* Vinyl ust Plug Vinyl ust Cap Metal ust Cap Metal ust Plug *rass **luminum ***Offered in red by adding R to end of part number Tel: leeds@guyson.co.uk web:

7 FLUI TRNSFR HK Series (Stainless Steel) Hansen s HK stainless steel is a general purpose industrial interchange coupling available in valved or non-valved designs, offered in 303/36 grades of stainless steel for excellent corrosion resistance in rugged applications. The HK Series features a ball latch mechanism with automatic self-sealing poppet valves. Product Features Meets dimensional requirements to standard 724- Series 303/36 Stainless steel construction for greater corrosion resistance and fluid compatibility Self-sealing poppet valves provide excellent high and low pressure sealing Standard body material: 303 or 36 Stainless Steel Standard seal material: una-n Seal options available in PTF, Neoprene, FKM, PM, and Kalrez PTF back up rings in sockets (females) Physical Characteristics Series ody pplications & Markets griculture Hydraulic Tool General Industry Construction Fluid Transfer Transportation Military Law nforcement/rescue Chemical Oil and Gas Consumer Products HVC Food and everage Trucks erospace Medical Nominal Flow iameter uropean Pressure quipment irective Couplings with nominal diameters up to and including 25 mm are designed and manufactured under rticle 4.3 of the uropean Pressure quipment irective 204/68/ U. Couplings with nominal diameters greater than 25 mm are designed and manufactured in accordance with stipulations of Module of the uropean Pressure quipment irective 204/68/U. They should not be used to convey unstable gases. Group = Hazardous media / Group 2 = Other media Max. Operating Pressure Non hazardous Hazardous liquids & gases liquids & gases Group 2 Group Flow ata Pressure drop (PSI) 72,5 58,0 43,5 29, ,25 4,35 2, Hydraulic Oil viscosity : 30 Cst at 40 C / 04 F Rated Flow* Flow rate (l/min) Flow rate (gpm) ir Inclusion (bar) (psi) (bar) (psi) (lpm) (gpm) cc. max. cc. max. HK , , HK ¼ , , HK , , HK ½ , , HK ¾ , , HK , , HK ¼** , HK ½ , HK 2½ , * For questions related to vacuum please contact aton. ** No Standard available for the 0HK Seal lastomer ata* Seal lastomer Max. Operation Temperature Range una-n -40 C to +2 C/40 F to +250 F Neoprene -54 C to +00 C/-65 F to +22 F PM -54 C to +49 C/-65 C to +300 F FKM -29 C to +204 C/-5 F to +400 F *For reference only, based on Guyson recommended temperatures. Contact Guyson technical sales department for further information on fluid compatibility. Tel: leeds@guyson.co.uk web: Fluid Loss ,5 0,3 0,2 0. Pressure drop (bar)

8 HK Series (Stainless Steel) HK-8 Series 303 Stainless Steel 36 Stainless Steel ody Thread (Female) Fig. imensions NPTF SPP S =Overall Length, =Maximum iameter To obtain connected length of coupling, add dimensions (Fig. ) and (Fig. 3) together. Figure Flats LLH MLH LLH LL2H6 ML2H6 ¼ 6.3 ¼ LL2H6S ML2H6S ¼ ¼ LL2H6 - ¼ LL3H2 ML3H LL3H2S ML3H2S LL3H ¾ LL4HP26 ML4HP½ 2.5 ½ LL4HP26S ML4HP26S ½ ½ LL4HP0 - ½ LL6HP3 ML6HP3 ¾ 20 ¾ LL6HP3S ML6HP3S ¾ 20 - ¾ LL6HP2 - ¾ LL8HP36 ML8HP ½ LL8HP36S ML8HP36S LL8HP Flats Figure 2 HK0/2/20 Series 303 Stainless Steel ody Thread (Female) Fig. imensions NPTF SPP LL0H4* ¼ - ¼-½ LL0H4S* ¼ - - ¼ LL2H4 ½ 40 ¼-½ LL2H4S ½ 40 - ¼ LL2H46 ½ 40 ½-½ LL2H46S ½ 40 - ½ LL20H5 2½ 50 2-½ LL20H5S 2½ LL20H56 2½ 50 2½ LL20H56S 2½ 50-2½ LL20H6 2½ LL20H6S 2½ =Overall Length, =Maximum iameter * 724- Series does not include -¼ inch body size couplings;therefore, Series 0HK is not covered by this standard. To obtain connected length of coupling, add dimensions (Fig. 2) and (Fig. 4) together. Tel: leeds@guyson.co.uk web:

9 HK Series (Stainless Steel) HK-8 Series ody Thread (Female) Fig. imensions NPTF SPP S C Figure 3 LLK MLK LLK LL2K6 ML2K6 ¼ 6.3 ¼ LL2K6S ML2K6S ¼ ¼ LL2K6 - ¼ LL3K2 ML3K LL3K2S ML3K2S LL3K ¾ LL4KP26 ML4KP26 ½ 2.5 ½ LL4KP26S ML4KP26S ½ ½ LL4KP0 - ½ LL6KP3 ML6KP3 ¾ 20 ¾ LL6KP3S ML6KP3S ¾ 20 - ¾ LL6KP2 - ¾ LL8KP36 ML8KP ½ LL8KP36S ML8KP36S LL8KP To obtain connected length of coupling, add dimensions (Fig. ) and (Fig. 3) together. C HK0/2/20 Series 303 Stainless Steel ody Figure 4 Thread (Female) Fig. imensions NPTF SPP C LL0K4* ¼ - ¼-½ LL0K4S* ¼ - - ¼ LL2K4 ½ 40 ¼-½ LL2K4S ½ 40 - ¼ LL2K46 ½ 40 ½-½ LL2K46S ½ 40 - ½ LL20K5 2½ 50 2-½ LL20K5S 2½ LL20K56 2½ 50 2½ LL20K56S 2½ 50-2½ LL20K6 2½ LL20K6S 2½ * 724- Series does not include -¼ inch body size couplings; therefore, Series 0HK is not covered by this standard. To obtain connected length of coupling, add dimensions (Fig. 2) and (Fig. 4) together. C ust Plugs and ust Caps ccessories Plug ust Cap Part No. Socket ust Plug Part No. Coupling Series Metal Vinyl Metal Vinyl HK PCHK* PPCHK SCHK* PSCHK 2HK PC2HK* PPC2HK SC2HK* PSC2HK 3HK PC3HK* PPC3HK SC3HK* PSC3HK 4HK PC4HK** PPC4HK(R)*** SC4HK** PSC4HK(R)*** 6HK PC6HK** PPC6HK(R)*** SC6HK** PSC6HK(R)*** 8HK PC8HK** PPC8HK(R)*** SC8HK** PSC8HK(R)*** 2HK PC2HK* SC2HK* 20HK PC20HK* SC20HK* Vinyl ust Plug Vinyl ust Cap Metal ust Cap Metal ust Plug *rass **luminum ***Offered in red by adding R to end of part number Tel: leeds@guyson.co.uk web: