20 Series Tube Fittings and Tubes
|
|
- Edmund Evan Cameron
- 5 years ago
- Views:
Transcription
1 20 Series Fittings and s 20,000 psi (379 bar) FIOK Group FH
2 20 Series Fittings ontents Features oned-and-hreaded onnection. Glands - G rosses - Metal-to-metal seal provides perfect leak-tight service from critical vacuum to high pressure. Anti-vibration connection components available. ollars - O Anti-Vibration Gland Assemblies - AVGA Fittings are easy to disconnect and retighten. Material is high tensile 36 stainless steel. Every fitting is stamped with size, material, and heat code. omposition Plugs - P Male onnectors - M 3 oned and hreaded Nipples - N 0 0 Female onnectors - F 4 20 Series ubing 5 ubing Gland ollar Union ouplings - U Working Pressure Reducing Union ouplings - U 6 Working pressure are dependent on the end connection with the lowest working pressures. Working pressure for the end connections used in this catalog are identified below Series Ends Union ouplings (Slip ype) - SU Bulkhead ouplings - BU to 00 F (-252 to 37.8 ) 200 F (93 ) Working Pressure, psig (bar) 400 F (204 ) 600 F (36 ) 800 F (427 ) (379) (379) 9250 (327) 8050 (244) 6800 (58) aps - 7 9/ (379) (379) (379) (379) (379) (379) 9250 (327) 9250 (327) 9250 (327) 8050 (244) 8050 (244) 8050 (244) 6800 (58) 6800 (58) 6800 (58) Elbows - U (379) (379) 9250 (327) 8050 (244) 6800 (58) ate in this table is applied only to the working temperature below 800 F (427 ), For the working temperature above 800 F (427 ) please consult FIOK Group, and then we will provide you relative solutions. ees - 8 8
3 2 20 Series Fittings 20 Series Fittings 3 NP Pipe hread Ends imensions NP Size /6 /8 Working Pressure, psig (bar) 5000 (034) Glands 9/6 SS-G-2FH4 SS-G-2FH6 SS-G-2FH9 imensions, (mm) G 0.50 (2.7) 0.58 (4.7) 0.63 (5.9) 0.73 (8.5) 0.88 (22.4) / 2 SS-G-2FH2.9 (30.2).00 (25.4) 0000 (689) SS-G-2FH6.38 (35.) No allowance is made for corrosion or erosion. Working emperature ollars SS-O-2FH4 imensions, (mm) 0.22 (5.6) SS-O-2FH (.9) 0.25 (6.4) onnection 20 Series Ends NP Pipe hread Ends emperature Rating -423 F(-252 ) to 200 F(649 ) -325 F(-98 ) to 400 F(204 ) 9/6 SS-O-2FH9 SS-O-2FH2 SS-O-2FH (8.3).25 (3.8) 0.3 (7.9) 0.37 (9.4) 0.50 (2.7) Installation Instructions Refer to the ools & Installation Instructions. Plugs SS-P-2FH4 imensions, (mm) autions: o not loosen or tighten fittings when system is pressurized. 9/6 SS-P-2FH6 SS-P-2FH9 SS-P-2FH (.9) 0.72 (8.3).8 (30.0).40 (35.6).69 (42.9) SS-P-2FH6.25 (3.8) 2.20 (55.9) imensions are for reference only, subject to change.
4 4 20 Series Fittings 20 Series Fittings 5 Male onnectors Female onnectors P P P - NP Size /8 SS-M-2FH4-NS2 imensions, (mm) NP hread G F.9 (30.2) 0. (2.8) 0.50 (2.7) 0.63 (5.9) P - NP Size imensions, (mm) NP hread G F SS-M-2FH4-NS4 0. (2.8) 0.50 (2.7) 0.63 (5.9) /8 SS-F-2FH4-NS2 0. (2.8) 0.50 (2.7) 0.63 (5.9) SS-M-2FH4-NS6 0. (2.8) 0.50 (2.7) 0.69 (7.5) SS-F-2FH4-NS4.63 (4.3) 0. (2.8) 0.50 (2.7) /2 SS-M-2FH4-NS8 0. (2.8) 0.50 (2.7) 0.88 (22.2) SS-F-2FH4-NS6.63 (4.3) 0. (2.8) 0.50 (2.7).3 (28.6) SS-M-2FH4-NS2.75 (44.5) 0. (2.8) 0.50 (2.7).06 (27.0) /2 SS-F-2FH4-NS8 0. (2.8) 0.50 (2.7) /8 SS-M-2FH6-NS (.2) 0.9 (4.8) 0.63 (5.9) 0.75 (9.) /8 SS-F-2FH6-NS2.50 (38.) 0.44 (.2) 0.20 (5.) 0.63 (5.9) 0.75 (9.) SS-M-2FH6-NS4.50 (38.) 0.44 (.2) 0.20 (5.) 0.63 (5.9) 0.75 (9.) SS-F-2FH6-NS4.75 (44.5) 0.44 (.2) 0.20 (5.) 0.63 (5.9) SS-M-2FH6-NS6.50 (38.) 0.44 (.2) 0.20 (5.) 0.63 (5.9) 0.75 (9.) SS-F-2FH6-NS6.8 (46.0) 0.44 (.2) 0.20 (5.) 0.63 (5.9).3 (28.6) /2 SS-M-2FH6-NS8.63 (4.3) 0.44 (.2) 0.20 (5.) 0.63 (5.9) 0.88 (22.2) /2 SS-F-2FH6-NS8 2.3 (54.0) 0.44 (.2) 0.20 (5.) 0.63 (5.9) SS-M-2FH6-NS2.75 (44.5) 0.44 (.2) 0.20 (5.) 0.63 (5.9).06 (27.0) SS-F-2FH6-NS (.2) 0.20 (5.) 0.63 (5.9).50 (38.) SS-M-2FH6-NS (.2) 0.20 (5.) 0.63 (5.9) 9/6 /8 SS-F-2FH9-NS2.63 (4.3) 0.53 (3.5) 0.3 (7.9).00 (25.4) 9/6 /8 SS-M-2FH9-NS2.75 (44.5) 0.53 (3.5) 0.9 (4.8).00 (25.4) 9/6 SS-F-2FH9-NS (3.5) 0.3 (7.9).00 (25.4) 9/6 SS-M-2FH9-NS4.75 (44.5) 0.53 (3.5) 0.25 (6.4).00 (25.4) 9/6 SS-F-2FH9-NS (3.5) 0.3 (7.9).3 (28.6) 9/6 SS-M-2FH9-NS6.75 (44.5) 0.53 (3.5) 0.3 (7.9).00 (25.4) 9/6 /2 SS-F-2FH9-NS (3.5) 0.3 (7.9) 9/6 /2 SS-M-2FH9-NS8.94 (49.2) 0.53 (3.5) 0.3 (7.9).00 (25.4) 9/6 SS-F-2FH9-NS (3.5) 0.3 (7.9).50 (38.) 9/6 SS-M-2FH9-NS (3.5) 0.3 (7.9).06 (27.0) 9/6 SS-F-2FH9-NS (66.7) 0.53 (3.5) 0.3 (7.9).75 (44.5) 9/6 SS-M-2FH9-NS (3.5) 0.3 (7.9) /8 SS-F-2FH2-NS2.75 (44.5) 0.62 (5.7) 0.32 (8.).9 (30.2) SS-M-2FH2-NS (5.7) 0.25 (6.4).9 (30.2) SS-F-2FH2-NS (5.7) 0.4 (0.4).9 (30.2) SS-M-2FH2-NS (5.7) 0.3 (7.9).9 (30.2) SS-F-2FH2-NS (60.3) 0.62 (5.7) 0.44 (.).9 (30.2) /2 SS-M-2FH2-NS8 2.8 (55.6) 0.62 (5.7) 0.38 (9.6).9 (30.2) /2 SS-F-2FH2-NS (66.7) 0.62 (5.7) 0.44 (.).9 (30.2) SS-M-2FH2-NS (5.7) 0.44 (.).9 (30.2) SS-F-2FH2-NS (66.7) 0.62 (5.7) 0.44 (.).9 (30.2).50 (38.) SS-M-2FH2-NS (66.7) 0.62 (5.7) 0.44 (.).9 (30.2) SS-F-2FH2-NS (66.7) 0.62 (5.7) 0.44 (.).9 (30.2).75 (44.5) SS-M-2FH6-NS (73.0) 0.72 (8.3) 0.25 (6.4).75 (44.5) SS-F-2FH6-NS (60.3) 0.72 (8.3) 0.4 (0.4).75 (44.5) SS-M-2FH6-NS (73.0) 0.72 (8.3) 0.3 (7.9).75 (44.5) SS-F-2FH6-NS (8.3) 0.55 (3.9).75 (44.5) /2 SS-M-2FH6-NS (73.0) 0.72 (8.3) 0.38 (9.6).75 (44.5) /2 SS-F-2FH6-NS (8.3) 0.56 (4.3).75 (44.5) SS-M-2FH6-NS (73.0) 0.72 (8.3) 0.56 (4.3).75 (44.5) SS-F-2FH6-NS (8.3) 0.56 (4.3).75 (44.5) SS-M-2FH6-NS (77.8) 0.72 (8.3) 0.56 (4.3).75 (44.5) SS-F-2FH6-NS (8.3) 0.56 (4.3).75 (44.5)
5 6 20 Series Fittings 20 Series Fittings 7 Union ouplings Union ouplings (Slip ype) imensions, (mm) G F imensions, (mm) G F SS-U-2FH4.62 (4.) 0. (2.8) 0.50 (2.7) 0.63 (5.9) SS-SU-2FH4.62 (4.) 0. (2.8) 0.50 (2.7) 0.63 (5.9) SS-U-2FH6.75 (44.5) 0.44 (.2) 0.20 (5.) 0.63 (5.9) 0.75 (9.) SS-SU-2FH6.75 (44.5) 0.44 (.2) 0.20 (5.) 0.63 (5.9) 0.75 (9.) 9/6 SS-U-2FH9 2.2 (53.9) 0.53 (3.5) 0.3 (7.9).00 (25.4) 9/6 SS-SU-2FH9 2.2 (53.9) 0.53 (3.5) 0.3 (7.9).00 (25.4) SS-U-2FH (5.7) 0.44 (.).9 (30.2) SS-SU-2FH (5.7) 0.44 (.).9 (30.2) SS-U-2FH (88.9) 0.72 (8.3) 0.56 (4.3).75 (44.5) SS-SU-2FH (88.9) 0.72 (8.3) 0.56 (4.3).75 (44.5) Reducing Union ouplings Bulkhead ouplings x Gx - Hex x x - imensions, (mm) x G Gx F 9/6 SS-U-2FH6-2FH4 SS-U-2FH9-2FH4.75 (44.5) 0.44 (.2) 0.53 (3.5) 0. (2.8) 0. (2.8) 0.63 (5.9) 0.50 (2.7) 0.50 (2.7) 0.75 (9.).00 (25.4) imensions, (mm) G F Panel Hole Size Max. Panel hickness 9/6 SS-U-2FH9-2FH (3.5) 0.44 (.2) 0.20 (5.) 0.63 (5.9).00 (25.4) SS-BU-2FH4.88 (47.8) 0. (2.8) 0.50 (2.7).00 (25.4) 0.8 (20.6) SS-U-2FH2-2FH (5.7) 0. (2.8).9 (30.2) 0.50 (2.7) SS-BU-2FH (.2) 0.20 (5.) 0.63 (5.9).06 (27.0) SS-U-2FH2-2FH (5.7) 0.44 (.2) 0.20 (5.).9 (30.2) 0.63 (5.9) 9/6 SS-BU-2FH (60.5) 0.53 (3.5) 0.3 (7.9).3 (28.6) 9/6 SS-U-2FH2-2FH (5.7) 0.53 (3.5) 0.3 (7.9).9 (30.2) SS-BU-2FH (66.5) 0.62 (5.7) 0.44 (.).9 (30.2).88 (47.6).69 (42.9) SS-U-2FH6-2FH (69.9) 0.72 (8.3) 0. (2.8) 0.50 (2.7).75 (44.5) SS-BU-2FH (88.9) 0.72 (8.3) 0.56 (4.3) 2.3 (54.0).94 (49.2) SS-U-2FH6-2FH (73.0) 0.72 (8.3) 0.44 (.2) 0.20 (5.) 0.63 (5.9).75 (44.5) 9/6 SS-U-2FH6-2FH (8.3) 0.53 (3.5) 0.3 (7.9).75 (44.5) aps SS-U-2FH6-2FH (8.3) 0.62 (5.7) 0.44 (.).9 (30.2).75 (44.5) SS--2FH4 0.8 (20.6) imensions, (mm) G F 0.50 (2.7) 0.63 (5.9) SS--2FH6.3 (28.6) 0.44 (.2) 0.63 (5.9) 0.75 (9.) 9/6 SS--2FH (3.5).00 (25.4) SS--2FH2.75 (44.5) 0.62 (5.7).9 (30.2) SS--2FH (8.3).75 (44.5)
6 8 20 Series Fittings 20 Series Fittings 9 Elbows rosses E E imensions, (mm) G E E hickness SS-U-2FH4 SS-U-2FH (.2) 0. (2.8) 0.20 (5.) 0.50 (2.7) 0.63 (5.9).2 (28.4) 0.75 (9.).00 (25.4).2 (28.4) 0.75 (9.).00 (25.4) 0.63 (5.9) 0.75 (9.) imensions, (mm) G hickness 9/6 SS-U-2FH (3.5) 0.3 (7.9).75 (44.5).25 (3.8).75 (44.5).25 (3.8).00 (25.4) SS--2FH4 0. (2.8) 0.50 (2.7).50 (38.).50 (38.) 0.63 (5.9) SS-U-2FH (5.7) 0.44 (.).9 (30.2).50 (38.).50 (38.) SS--2FH (.2) 0.20 (5.) 0.63 (5.9) 0.75 (9.) SS-U-2FH (8.3) 0.56 (4.3) 2.06 (52.3) 2.06 (52.3).75 (44.5) 9/6 SS--2FH (3.5) 0.3 (7.9).00 (25.4) SS--2FH (5.7) 0.44 (.).9 (30.2) SS--2FH (8.3) 0.56 (4.3) 4.2 (04.6) 4.2 (04.6).75 (44.5) ees E imensions, (mm) G E hickness SS--2FH4 0. (2.8) 0.50 (2.7).50 (38.).2 (28.4) 0.75 (9.) 0.63 (5.9) SS--2FH (.2) 0.20 (5.) 0.63 (5.9).00 (25.4) 0.75 (9.) 9/6 SS--2FH (3.5) 0.3 (7.9).75 (44.5).25 (3.8).00 (25.4) SS--2FH (5.7) 0.44 (.).9 (30.2).50 (38.) SS--2FH (8.3) 0.56 (4.3) 4.2 (04.6) 2.06 (52.3).75 (44.5)
7 0 20 Series Fittings 20 Series Fittings Anti-Vibration Gland Assemblies he extreme vibration or shock, such as mobile pressure systems or long tubing runs culminating at a compressor that the tubing systems are subjected to, will be prevented by using FIOK Anti-Vibration Gland Assemblies. hese assemblies use the same reliable connection geometries as the standard FIOK fittings, with the added advantage of essentially unlimited vibrational fatigue life. A coned and threaded tube, when subjected to unusual or excessive vibration, may fail prematurely and break at the last thread. FIOK Anti-Vibration Gland Assembly acts to move the fulcrum of vibration away from the threaded part of the tube and onto the strong, solid wall of the tubing. A wedge-like collet firmly holds the assembly in place, virtually eliminating premature tubing failure while reliably maintaining a leakage-free connection between the tube and the connection seat. 9/6 SS-AVGA-2FH4 SS-AVGA-2FH6 SS-AVGA-2FH9 SS-AVGA-2FH2 SS-AVGA-2FH6.9 (30.2).50 (38.).78 (45.2) 2.38 (60.5) imensions, (mm).9 (30.2).4 (35.8).59 (40.4).69 (42.9) G 0.63 (5.9) 0.8 (20.6).25 (3.8).50 (38.) 20 Series ubing Working pressure: psig (379 bar). 36 and 304 stainless steel are standard material. Other materials are available upon request. Material, size, and heat code are indicated on the tubing surface. 9/6 9/6 x - I Material 36 SS 36 SS 36 SS 36 SS Basic SS-M-2FH4- SS-M-2FH6- SS-M-2FH9- SS-M-2FH2- S4-M-2FH4- S4-M-2FH6- S4-M-2FH9- S4-M-2FH2- olerance (mm) 0.248/0.243(6.30/6.7) 0.248/0.243(6.30/6.7) 0.370/0.365(9.40/9.27) 0.370/0.365(9.40/9.27) 0.557/0.552(4.5/4.02) 0.557/0.552(4.5/4.02) 0.745/0.740(8.92/8.80) 0.745/0.740(8.92/8.80) oned and hreaded Nipples 36 SS SS-M-2FH /0.990(25.27/25.4) x x - I.. (mm) S4-M-2FH /0.990(25.27/25.4) SS-N-2FH SS-N-2FH4-3 SS-N-2FH4-4 SS-N-2FH4-6 SS-N-2FH4-8 SS-N-2FH (69.9) 3 (76.2) 4 (0.6) 6 (52.4) 0 (254.0) Add the actual foot (feet)/meter (meters) as a suffix to the basic ordering number to get the complete ordering number. For example:. 0 feet length, is ", I.. is ", 36 SS 20 Series tube, the complete ordering number is: SS-M-2FH meters length, is, I.. is ", 20 Series tube, the complete ordering number is: S4-M-2FH2-6M SS-N-2FH4-2 2 (304.8) SS-N-2FH6-3 3 (76.2) SS-N-2FH6-4 4 (0.6) SS-N-2FH6-6 6 (52.4) SS-N-2FH6-8 SS-N-2FH6-0 0 (254.0) SS-N-2FH6-2 2 (304.8) 9/ SS-N-2FH9-4 4 (0.6) 9/ SS-N-2FH9-6 6 (52.4) 9/ SS-N-2FH9-8 9/ SS-N-2FH9-0 0 (254.0) 9/ SS-N-2FH9-2 2 (304.8) SS-N-2FH2-4 4 (0.6) SS-N-2FH2-6 6 (52.4) SS-N-2FH2-8 SS-N-2FH2-0 0 (254.0) SS-N-2FH2-2 2 (304.8) SS-N-2FH6-6 6 (52.4) SS-N-2FH6-8 SS-N-2FH6-0 0 (254.0) SS-N-2FH6-2 2 (304.8)
60 Series Tube Fittings and Tubing
60 Series Fittings and ubing 60,000 psi (4137 bar) FIOK Group FIOK GmbH (Headquarter) Sprendlinger andstr. 115, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 Fax: +49 69 8900 4495 FIOK, Inc. 13843
More information10 Series Tube Fittings and Tubing
0 Series ube ittings and ubing 0,000 psi (690 bar) IOK roup IOK mbh (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, ermany el.: +49 69 900 449 ax: +49 69 900 4495 IOK, Inc. 343 North romenade
More informationMetal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationPneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
More informationUltra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, ittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
More informationPneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
More informationTable Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
More informationGroup 6. 10K High Pressure Fittings Tubing Nipples Adaptors
Group 0K High Pressure Fittings Tubing Nipples Adaptors INEX Page ontents 2 Index 3 0K Fittings NPT-NPT 4 0K Fittings JI-JI, JI - NPT 5 X-Overs - HP Fittings / Male Threads -8 High Pressure Fitting and
More informationClean Fittings. No.06-2 August 2015
Clean Fittings No.06-2 ugust 205 Clean Fitting Contents Clean Weld Fittings Mini lbow WM Mini ee WM Mini Cross WMX Mini educing lbow WM Mini educing ee WM Mini educing Union WMU ong lbow W ong ee W ong
More informationFittings and Tubing QS Series
Fittings and Tubing QS Series Medium Since 1945 Autoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationFittings, Tubing & Nipples
Fittings, Tubing & Nipples High Pressure Pressures to 150,000 psi (10342 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
More informationFittings, Tubing & Nipples
Fittings, Tubing & Nipples High Pressure Pressures to 150,000 psi (10342 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
More informationSwagelok Medium-Pressure, Gaugeable Tube Fit tings and Adapte r Fit tings
www.swagelok.com Swagelok Medium-Pressure, Gaugeable Fit tings and dapte r Fit tings For Pre s sure s up to 15 0 0 0 psig (1034 ba r) asy installation, no special tools required ssembly by one full turn
More informationLX Hand Pump Oil. hand pumps - anti-sludge, anti-rust additives. HF oil - good low temperature performance. Dimensions (in) Model No. A-64 A-65 1.
Hydraulic Oil, Manifolds and Fittings Shown top to bottom: HF-, HF-, HF-2, LX-, 6, and FZ Enerpac System omponents HF Oil power pumps efficiency - prevents cavitation - anti-sludge, anti-rust, anti-foam
More informationFittings, Tubing & Nipples
Fittings, Tubing & Nipples Medium s to 20,000 psi (1379 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
More informationSemiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division
Semiconductor / High Purity Products K SC IINGS Weld ittings / etal Seal ittings SC ivision K SC SUPR CN CHNOOGY ICRO W IINGS ORG W IINGS C S IINGS 2 Super Clean itting Series W and etal Seal ittings components
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationThermoplastic Couplings
Thermoplastic ouplings Thermoplastics -1 Quick oupling Division Thermoplastic ouplings Table of ontents Thermoplastics oupling Selection Guide...-3 Spectrum Series...-4 Specifications...-4 ouplers...-5
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi (4,500 bar)
igh Pressure Valves, ittings and Tubing Pressures to psi (4,00 bar) MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality
More informationMedium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi
Medium Pressure Valves, ittings and Tubing MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationSolenoid Controlled Relief Valves
hese valves are a comination of a pilot operated relief valve and a solenoid operated directional valve. Piping etween the two is eliminated as the solenoid valve is directly mounted on the relief valve
More informationParker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)
Parker utoclave Engineers: Fluid omponents Product February 2013 Valves, Fittings and Tubing Pressures to 150,000 psi (10,000 bar) Fittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since
More informationHAM-LET PRECISION INSTRUMENT PIPE FITTINGS
M- PRISION INSRUMN PIP IINS NR he M- Pipeline range of connectors is manufactured for typical applications in chemical and petrochemical processing plants, as well as oil, gas and power generation industries.
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationMedium Pressure Valves, Fittings and Tubing Pressures to 21,000 22,500 psi (1,500 (1,550 bar)
Medium Valves, ittings Tubing s to 22,00 psi (,00 (,0 bar) MXIMTOR has been designing manufacturing high pressure equipment for more than thirty years has a worldwide reputation for quality reliability,
More informationHAM-LET PRECISION INSTRUMENT PIPE FITTINGS
HAM-E PRECISION INSRUMEN PIPE FIINGS PRECISION INSRUMENAION PIPE FIINGS GENERA HAM-E Group is pleased to introduce its line of Precision Instrument Pipe Fittings. he Pipeline range of connectors is manufactured
More informationatalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
Section 1 Parker Hannifin orporation ivision atalog 0802-2/USA otes ontrol omponents 2 Parker Hannifin orporation ivision atalog 0802-2/USA Index ontrol omponents Advantages, Assembly, Ordering Information...
More informationHIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT
HIGH PRESSURE TEHNOLOGY HYRULIS PNEUMTIS TESTING EQUIPMENT Ultra Valve cross sections Gland with packing of copper aluminium alloy for smooth running ody Non-rotating stem of 17-4 PH prevents scoring in
More informationCOMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 HROUGH 2 -INCH, 2 MM HROUGH 50 MM-MERIC LE-LOK UBE FIINGS ESCRIPION he HM-LE GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications since its establishment
More informationCOMPRESSION TUBE FITTINGS CONNECTORS
COMPRESSION UBE FIINGS CONNECORS 1/16 HROUGH 2 2 MM HROUGH 50 MM LE-LOK HO OES I ORK? LE-LOK UBE FIINGS ESCRIPION CONNECORS he LE-LOK tube fitting is a mechanism used both to seal and to grip tubing. he
More informationMetric One-Touch Fittings
Metric One-ouch Fittings pplicable tube material pplicable tube O.D (mm) With Sealant SQH 1/ 1/ Soft 3/ olyurethane ф ф ф ф ф SQ 1/ 1/ Soft 3/ olyurethane SQ 1/ 1/ Soft 3/ olyurethane SQY 1/ 1/ Soft 3/
More informationDigital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
More informationCOMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM
OMPRSSION U IINS 1/16 ROU 2 2 MM ROU 50 MM L-LOK U IINS SRIPION L-LOK O OS I ORK? he L-LOK tube fitting is a mechanism used both to seal and to grip tubing. he mechanical advantage and geometry of this
More informationStop valves SVA-S and SVA-L
MAKING MODERN LIVING POSSIBLE echnical brochure Stop valves SVA-S and SVA-L SVA Stop Valves are available in angleway and straightway versions and with Standard neck (SVA-S) and Long neck (SVA-L) he stop
More informationApplicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material
Flame Resistant (Equivalent to UL-94 Standard V-0) FR One-touch Fittings KR-W2 Series RoS Guide Collet Chuck ccepts nylon. Large retaining force. he chuck provides secure retention and the collet increases
More informationValve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
More informationAnti-Vibration Collet Gland Assembly
nti-vibration Gland ssembly Pressures to 20,000 psi (1379 bar) Sizes to 1-1/2 (38.10 mm) For extreme conditions of vibration and/or shock in tubing systems, such as an uned line near a compressor, conedand-threaded
More informationDK-Lok UHP Fittings. No.09-01(E) May 2017
K-ok UP Fittings No.09-01() May 2017 ean UP Fitting ontents ean Wed Fittings Micro bow WM Micro ee WM Micro ross ee WMX Micro ribow WMB Micro af bow WM Micro Reducing bow WMR Micro Reducing ee WMR 05 05
More informationPlug: KBP Elbow module: KBV Female connector union: KBH. Tubing. Guide. Chuck Collet. O-ring Lock ring. Spring Spring guide. Specifications.
Piping Module Series KB RoHS Plug: KBP Elbow module: KBV Female connector union: KBH Lock ring Plug body hread Spring Spring guide Release button (blue) Seal Stud Universal elbow body ubing Guide Chuck
More informationACCESSORIES TABLE OF CONTENTS
Filters page 532 Fittings, Nylon pages 543-544 Miscellaneous ccessories pages 550-551 Siphons/ooling Extensions pages 533-534 Pneumatic Valves page 544 Gage Guards/ Pressure Snubbers pages 534-535 Pneumatic
More informationOil and Gas Products Pressures to 30,000 psi
Oil and Gas Products MAXIMATOR has been designing and manufacturing specialty products to the high pressure market for over thirty years and has a worldwide reputation for quality and reliability. Oil
More informationBrass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8
More informationPneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
More informationMedium and High Pressure Product Presentation
Medium and High Pressure Product Presentation www.fitokgroup.com 2016 1 Contents 1. Applications 2. Medium and High Pressure Fittings 3. Tubing 4. Medium and High Pressure Valves 5. Filters 6. Quick Couplings
More informationStop valves SVA-S and SVA-L
MAKING MERN LIVING POSSIBLE echnical brochure Stop valves SVA-S and SVA-L SVA Stop Valves are available in angleway and straightway versions and with Standard neck (SVA-S) and Long neck (SVA-L) he stop
More informationSpeed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model.
Speed Controller with Uni One-touch Fitting Push-lock type Series Elbow Universal Brass New-stand male threads for piping that reduces the screw-in time by 1/3. Gasket Female thread Rc, G NP, NPF Shape
More informationAston Fittings. Manufacturing Ltd. machining. valves. fittings. pipe & tube. instrumentation packages
Aston Fittings Manufacturing Ltd. machining. valves. fittings. pipe & tube. instrumentation packages Intrumentation Pachages Aston are manufacturers and suppliers of Valves, Fittings, Flanges, ube and
More informationgyrolok Gyrolok Tube Fittings
yrolok ube ittings yrolok itting ocator 2 yrolok eatures & enefits 4 yrolok esign 5 ow to Order 6 Pipe hread Information 7 S ittings Information 7 yrolok itting imensional & pplication ables 8 Replacement
More informationVCR Metal Gasket Face Seal Fittings
lloy 2507 Super uplex Weld Fittings 1 www.swagelok.com Metal Gasket Face Seal Fittings WL 1/16 to 1 in. and 6 to 18 mm sizes High-purity stainless steels The original design, the authentic brand 2 Weld,,
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
More informationgyrolok Gyrolok Tube Fittings
yrolok ube ittings yrolok itting ocator 2 yrolok eatures & enefits 4 yrolok esign 5 ow to Order 6 Pipe hread Information 7 S ittings Information 7 yrolok itting imensional & pplication ables 8 Replacement
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
More informationMedium- and High-Pressure Fittings, Tubing, Valves, and Accessories
www.swagelok.com Medium- and High- Fittings, Tubing, Valves, and ccessories FK, FKB, IPT, and Sno-Trik Series Products Rated up to 60 000 psig (4134 bar) nd connections up to 1 1/2 and 12 mm NC MR0175/ISO15156
More informationCatalogue 7 STAUFF Test
est Couplings est daptors est Hoses and Connectors Catalogue 7 SUFF est Introduction Introduction 4-11 est Couplings 12-53 est daptors 54-59 B est Hoses and Connectors 60-71 C echnical ppendix 72-77 D
More informationMedium- and High-Pressure Fittings, Tubing, Valves, and Accessories
Medium- and High- Fittings, Tubing, Valves, and ccessories 1 www.swagelok.com www.swagelok.com Medium- and High- Fittings, Tubing, Valves, and ccessories FK, FKB, IPT, CTB, and Sno-Trik Series Products
More informationPneumatic Quick Couplings
Pneumatic Quick ouplings -1 maku GmbH & o. KG 73630 Remshalden Telefon (0 71 51) 7 26 26 Telefax (0 71 51) 7 42 01 www.maku-industrie.de Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single
More informationLow Noise Type Solenoid Controlled Relief Valves
he low-noise solenoid controlled relief valve is a combination of a low-noise type pilot operated relief valve and a solenoid operated directional valve. It is used for no-load pump operation by using
More informationProduct Features: Ultra-High Purity cleaning, assembly, and packaging in a Class 100 Clean Room environment for all wetted components.
ittings Metal ace Seal and Weld ittings ittings designed for ultra-high purity conditions for critical applications hese UP fittings are designed for critical applications where ultra-high pure conditions
More informationQuick Couplings. Section F
Quick ouplings Section conomatic Quick onnect...2-3 Sleevmatic...4-6...7-8 conomatic Quick onnect ouplings...9-10 Pneumatic ivision 1 Richland, Michigan Pneumatic Products irline ccessories Numbers & imensions
More informationGUIDELINES The following guidelines are recommended for the proper functioning and the maximum service life of the 630/710 series of connections. Fail
GUIDELINES The following guidelines are recommended for the proper functioning and the maximum service life of the 630/710 series of connections. Failure to follow these guidelines may adversely affect
More informationins LET-LOK (IMPERIAL) TUBE FITTINGS Page About Twin Ferrule Compression Fittings 2 Installation Instructions 3
ins bout win Ferrule Compression Fittings 2 nstallation nstructions 3 Conventions mperial Metric Page 4 32 ndex to et-ok mperial Fittings 4-5 -OK (MPR) UB FGS ndex to et-ok Metric Fittings 32-33 mm ndex
More informationMedium Pressure Products
Medium Pressure Products Fittings, Valves, Regulators and Hoses 6,000-20,000 PSI Range Catalog 4234 September 2005 MPI Medium Pressure Fittings Introduction Parker Hannifin Fittings* are engineered and
More information82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
More informationMiniature Fittings Series M
Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
More information10.7 Single Valve Gate Nozzle GAN...S01
Single Valve Gate Nozzle GN...S01 10.7 Single Valve Gate Nozzle GN...S01 10.7.1 echnical Data - Single Valve Gate Nozzle GN...S01 Doc003429.png Single Valve Gate Nozzle Valve pin operation Operation medium
More informationFLANGES FLANGES.
FANGES FANGES 26 Available Materials Stainless Steel A182 F304/, 304 F310, 310 F316/, 316 F317/ F321/ F347/ F51 F53 F904 F44 (254SMO) Duplex & Super Duplex A182 F51, F53, F55, F60 Nickel-base Alloy Alloy200,
More informationSection 2. Pipe, Valves and Fittings Sizes ¼" to 12" Schedule 80 CPVC Piping System. Serviced by GF Little Rock
Section 2 Schedule 80 CPVC Piping System Pipe, Valves and Fittings Sizes ¼" to 12" Serviced by GF Little Rock Effective March 27, 2006 Glossary Std. Pack = Standard Carton Quantity FP = Female Pipe hread
More informationHydraulic. Quick Couplings
Hydraulic Quick ouplings -1 Introduction ouble Shut-Off and Straight-Thru ouplings Parker hydraulic couplings have a wide variety of designs, each tailored to a particular application or use. This catalog
More informationSUPPLY JOINTS CONTENTS
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Specifications, Order Codes, Size Table 371 Dimensions 373 NCU Specification Order Codes, Model Table 379
More informationTECHNICAL 20,000 PSI UNIT CONVERSIONS & FORMULAS. Measurement Conversion Example. Formula English Units Metric Units
UNIT CONVERSIONS & FORMULAS Measurement Conversion Example 1 in. = 25.4 mm 12 in. x 25.4 = 304.8 mm 1 in. =.0254 m 120 in. x.0254 = 3.05 m Length 1 ft. =.3048 m 12 ft. x.3048 = 3.68 m 1 mm =.0394 in. 100
More informationONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
More informationLIGHTWEIGHT + COMPACT. Rotary Union Solutions SPS. Series NPT CONNECTION SIZE OPTIONS
LIGTWEIGT + OMPT Rotary Union Solutions Series NPT ONNETION SIZE OPTIONS ⅛" ½" ¼" ¾" ⅜" 1" Rotary Union Solutions ontents bout STI 3 What is a Rotary Union? 4 Series Overview 5 ow To Order 7 Specifi cations
More informationO-RING SEAL TUBE FITTINGS
Hose Fittings O-RING SEL TUBE FITTINGS TLOG NO. LORS-16 i Phone: 937/277-9364 FX: 937/277-6516 www.lenzinc.com Hose O-RING Fittings SEL The goal of Lenz is to help our Distributors, OEM s and customers
More informationHow to Order. M5 M5 x 0.8 U10/ UNF
Series -S-FSG Push-lock ype RoHS Speed Controller with Indicator Stainless Steel ype (Elbow/Universal) How to Order 1 ype 2 Elbow 3 Universal Body size -32UNF Port size 5 U/32-32UNF Stainless steel type
More information8.5 Service of the Actuator PNC4508M02 Series
8.5 Service of the ctuator N4508M02 Series 8.5.1 echnical Data N4508M02-F, N4508M02-R Doc003635.png Doc003653.png () (B) () LOSED O OOLING ctuator, bolted to manifold. Valve pin operation Operation medium
More informationInstrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
More informationgrippers pneumatic precision parallel movement DPP DirectConnect Series
grippers pneumatic precision parallel movement DPP Directonnect Series DPP Series No Adaptor Plates Required! Shown smaller than actual size. D-1M-E--5 linear thruster slide. Precision Gripping Preloaded
More informationModel Model Model
Filter Separators Model 9003 Model 9004 Model 9001 & 9032 Model 9002 EXAIR's Filter Separators remove water, dirt and rust from your compressed air system. They prevent these contaminants from plugging
More informationLight Coupling Series
http://www.pisco.co.jp FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting oupling Light oupling 342 oupling with Push-In Fitting. Easy oupling and Uncoupling with One-Hand Operation. Suitable
More informationUltra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, Fittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
More informationPerSec. Drycleaning Machine Nipple Installation Guide
PerSec Drycleaning Machine Nipple Installation Guide The CAREfill System has been specifically designed to reduce the risk of spills and eliminate perc solvent vapor emissions into the workplace during
More informationGriplok. Tube Fittings. Quality Instrumentation Fittings
ube ittings Quality Instrumentation ittings ompany Information 1926 SSP ittings orp. is founded in leveland, Ohio, U.S.. SSP begins as a contract manufacturer of screw machine products in brass and carbon
More informationAdmiralty Bronze Tube Fittings
Admiralty Bronze ube ittings One of the most comprehensive component design and manufacture packages available today to the Oil and Petrochemical Industry is offered by Safelok Components. arnessing the
More informationAir Headers and Distribution Manifolds
Air Headers and Manifolds A, M, M and FIOK Group FIOK GmbH (Headquarter) prendlinger Landstr, 9 Offenbach am Main, Germany el: +9 9 9 9 Fax: +9 9 9 9 FIOK, Inc orth romenade Blvd, uite 7, tafford, exas
More informationCheck Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Check Valves Catalog 4135-CV Introduction Parker Series Check Valves are designed for uni-directional flow control of fluids
More informationaccessories SYSTEM ACCESSORIES
SYSEM ACCESSORIES 66 SYSEM ACCESSORIES Introduction M1 - ort Control Manifold GA1 Gauge Adapters F3 3 Nipples G5-2.5 10,000 psi/ 700 bar Gauges ower ump HCA20 Hoses C213 Couplers ump with 4 ort Manifold
More informationDirectional Controls
VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationTechnical Manual MSI Hydraulic Adjustable Choke
Technical Manual MSI Hydraulic Adjustable Choke MSI A Division of Dixie Iron Works, Ltd. 300 W. Main St. Alice, TX 78332 www.diwmsi.com (800) 242-0059 Revision A TABLE OF CONTENTS SECTION 1 WARNINGS...
More informationTable of Contents. Quick Coupling Products
Quick oupling Products Table of ontents Table Of ontents...1 Fluid Quick ouplings...3 oupling Selection uide...4 Non-Spill ouplings...5 FS Series...5 ouplers...6 Nipples...7 FS Series ust aps & Plugs...8
More informationDirect contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
More informationO-Ring Swivel Joints
O-Ring Swivel Joints O-Ring Parts Identification List 1. O-ring (dust) seal 2. ball retainer screw 3. O-ring (pressure) seal 4. grease fitting 5. ball bearings O-Ring he O-ring pressure seal ensures a
More informationSM Valve Installation
INSRUCIONS FOR MODELS SM-12000 Valve Installation OOLS AND SUPPLIES Adjustable Pipe 1 Shut off the water supply to the tub and shower. Verify that the hole sizes and positions in the wall are correct:
More informationHigh Lift Transmission Jack
655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales: (507) 455-7223
More informationComposite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
More information2WE30/5WE30: WOG - Stainless Steel Ball Valve 2-Piece NPT Ends Stainless Steel Full Port Direct Mount Actuation Design
2WE30/5WE30: 2000-1500 WOG - Stainless Steel Ball Valve 2-Piece NP Ends Stainless Steel Full Port Direct Mount Actuation Design SANDARD SPEIFIAIONS General Description Item # Figure Design Parameters Mount
More information