Stop valves SVA-S and SVA-L
|
|
- Natalie Shields
- 6 years ago
- Views:
Transcription
1 MAKING MERN LIVING POSSIBLE echnical brochure Stop valves SVA-S and SVA-L SVA Stop Valves are available in angleway and straightway versions and with Standard neck (SVA-S) and Long neck (SVA-L) he stop valves are designed to meet all industrial refrigeration application requirements and are designed to give favourable flow characteristics and are easy to dismantle and repair when necessary. he valve cone is designed to ensure perfect closing and withstand a high system pulsation and vibration, which can be present specifically in the discharge line. Features Applicable to all coon refrigerants including flaable hydrocarbons and all non-corrosive gases/liquids. Can be used in chemical and petro-chemical applications. Optional accessories: - Heavy duty industrial hand wheel for frequent operation. - Cap for infrequent operation. Available in angleway and straightway versions with Standard neck or Long neck (DN 15 to DN 40) for insulated systems. Each valve type is clearly marked with type, size and performance range. he valves and caps are prepared for sealing, to prevent operation by unauthorized persons, using a seal wire. Internal metal backseating: - DN 6-65 (¼ - 2½ ) Internal PFE backseating: - DN (3-8 ) Can accept flow in both directions. Housing and bonnet material is low temperature steel according to requirements of the Pressure Equipment Directive and other international classification authorities. Stainless steel bolts. Maximum allowable working pressure and temperature range: emperature: 50 C/+150 C ( 58 F/+302 F Max working pressure: SVA-S/L (DN 15-65) 52 bar (754 psi) within the temperature range 50 C/+50 C ( 58 F/+122 F) SVA-S/L (DN ) 50 bar (725 psi) within the temperature range 50 C/+50 C ( 58 F/+122 F) Please refer to the pressure and temperature curve at page 2 for maximum working pressure within the temperature range 50 C to +150 C ( 58 F to +302 F). Classification: DNV, CRN, BV etc. o get an updated list of certification on the products please contact your local Danfoss Sales Company. Danfoss A/S (AC-MCI/MWA), DKRCI.PD.KD1.A2.02 / 520H5936 1
2 Pressure and temperature range Pressure psi bar SVA-S/L DN15-DN65 SVA-S/L DN80 - DN C F emperature Design Connections Available with the following connections: y Butt-weld DIN (EN 10220) y Butt-weld ANSI (B Schedule 80), DN 6-40 (¼ - 1½ ) y Butt-weld ANSI (B Schedule 40), DN (2-8 ) y Socket Weld (ANSI B 16.11), DN 15 - DN 50 (½ - 2 ) y Outside pipe thread G ½ - G 7/8 (ISO 228/1) y FP Female Pipe hread, NP (ANSI/ASME B ), DN (½ - 1¼ ) Housing Made of special, cold resistant steel. Valve cone he valve cone can be turned on the spindle, thus there will be no friction between the cone and the seat when the valve is opened and closed and the special design will avoid cone spin due to pulsation and vibration when the valve is in open position. A teflon tightening ring provides perfect sealing with minimum closing force. Spindle Made of polished stainless steel, ideal for leap seal sealing. Packing gland he low temperature packing gland ensures a perfect tightness in the range: 50/+150 C ( 58/+302 F). he packing glands are equipped with a scraper ring to prevent penetration of dirt and ice into the packing gland. Pressure Equipment Directive (PED) SVA valves are approved according to the European standard specified in the Pressure Equipment Directive and are CE marked. For further details / restrictions - see Installation Instruction. Installation It is recoended that the valves be installed in the direction of flow indicated by the arrow on the valve body. he valve can be installed in the opposite direction but this slightly reduces the -value (C v -value). he valve is designed to withstand high internal pressure. However, the piping system in general should be designed to avoid liquid traps and reduce the risk of hydraulic pressure caused by thermal expansion. For further information refer to installation instructions for SVA. Example of Marking Ring SVA Nominal bore DN 25 (1 ) DN32-80 (1¼ - 3 ) DN (4-8 ) Classified for Fluid group I Category Article 3, paragraph 3 II III 2 DKRCI.PD.KD1.A2.02 / 520H5936 Danfoss A/S (AC-MCI/MWA),
3 echnical data y Refrigerants Applicable to all coon refrigerants including flaable hydrocarbons and all noncorrosive gases/liquids. For further information please see installation instruction for SVA. y emperature range 50/+150 C ( 76/+302 F). y Pressure range he valves are designed for max. working pressure 52 bar g (754 psi g). Connections -angle -straight C v -angle C v -straight DIN Butt-weld DIN (EN 10220) ¼ 3/₈ ½ ¾ 1 1¼ 1½ 2 2½ angle -straight C v -angle C v -straight ANSI Butt-weld ANSI (B Schedule 80) ¼ 3/₈ ½ ¾ 1 1¼ 1½ Butt-weld ANSI (B Schedule 40) ½ Danfoss A/S (AC-MCI/MWA), DKRCI.PD.KD1.A2.02 / 520H5936 3
4 Connections -angle -straight C v -angle C v -straight SOC Socket welding ANSI (B 16.11) ½ ¾ 1 1¼ 1½ Inside pipe tread -angle -straight C v -angle C v -straight FP FP inside pipe thread, NP (ANSI/ASME B ) ½ ¾ (½ 14 NP) (¾ 14 NP) ¼ ( NP) (1¼ 11.5 NP) Connections - SVA 6 and SVA 15 Outside pipe thread L L K v -angle K v -str. C v -angle C v -str outside pipe thread, (ISO 228/1) 6 ¼ G 1 / /₈ - ½ G 7 / Nipples for outside pipe thread, (ISO 228/1) ND L L Inside pipe thread ND welding nipples, (DIN 2448) 6 ¼ G 1 / /₈ G 7 / 8 15 ½ G 7 / 8 NA L L Inside pipe thread NA welding nipples, ANSI (B Schedule 80) 6 ¼ G 1 / /₈ G 7 / 8 15 ½ G 7 / 8 4 DKRCI.PD.KD1.A2.02 / 520H5936 Danfoss A/S (AC-MCI/MWA),
5 Material specification SVA 6-10 ( 1 / 4-3 / 8 ) Danfoss M148B0005_1 SVA ( 1 / 2-3 / 4 ) Danfoss M148B0004_1 Danfoss M148B0005_1 Welding nipple No. Part Material EN ISO ASM 1 Housing Steel G20Mn5Q, P285QH+Q, Bonnet, Flange Steel G20Mn5Q, P285QH+Q, Bonnet, Insert Steel 11SMn Spindle Stainless steel X8CrNiS DIN (SVA-SS only) 5 Cone Steel 11SMn Packing gland Stainless steel X8CrNiS Packing washer Aluminium 10 O-ring Cloroprene (Neoprene) 11 Spring loaded eflon ring (SVA-SS) PFE ype 2 R 683/9 ype /13 ype 2 R 683/9 ype /13 LCC, A LF2, A350 LCC, A LF2, A350 AISI 1213 AISI 303 AISI 1213 AISI Bolts Stainless steel A2-70 A2-70 ype Gasket Fiber, Non-asbestos 14 Handwheel Steel 17 Cap Aluminium 18 Gasket f. cap Nylon 19 Locking nut Steel 20 Screw Steel 22 Welding nipple Steel S235JRG Fe260B, 630 Grade C, A Nut Steel 11SMn30 ype 2 AISI R 683/9 24 Packing washer Non-asbestos 25 Disk spring Steel Danfoss A/S (AC-MCI/MWA), DKRCI.PD.KD1.A2.02 / 520H5936 5
6 Material specification SVA (3-8 ) Danfoss M148B0007_1 Danfoss M148B0006_1 No. Part Material EN ISO ASM 1 Housing Steel G20Mn5Q Valve bonnet Steel G20Mn5Q, P285QH+Q, Spindle Stainless steel X5CrNi Cone Cone seal Steel eflon (PFE) 11SMn Packing gland Stainless steel X8CrNiS O-ring Cloroprene (Neoprene) 10 Spring loaded eflon ring PFE 11 O-ring Cloroprene (Neoprene) ype 11, R 683/13 ype 2, R 683/9 AISI 1213 ype 17 R 683/13 LCC A352 LCC, A LF2, A350 AISI 304, A276 AISI Bolts Stainless steel A2-70 A2-70 ype Gasket Fiber, Non-asbestos 14 Hand wheel Steel 15 Washer Stainless steel 16 Nut Stainless steel 17 Cap Aluminium 18 Gasket for cap Nylon (PA 6) 19 Soft backseat eflon (PFE) 20 Identification ring Stainless steel 21 Wear ring eflon (PFE) 22 Disk spring Steel 23 O-ring PFE/Cloroprene (Neoprene) 6 DKRCI.PD.KD1.A2.02 / 520H5936 Danfoss A/S (AC-MCI/MWA),
7 Dimensions and weights SVA 6-10 in angle execution with handwheel SVA 6-10 Valve size C max. G D H Weight SVA 6 SVA kg 1.4 kg SVA 6-10 in angle execution with cap SVA 6-10 Valve size C G D H Weight SVA 6 SVA kg 1.4 kg Specified weights are approximate values only. Danfoss A/S (AC-MCI/MWA), DKRCI.PD.KD1.A2.02 / 520H5936 7
8 Dimensions and weights SVA 6-10 SVA 6-10 in straight-way execution with handwheel Valve size C max. B max. E G D H Weight SVA kg SVA kg SVA 6-10 in straight-way execution with cap Valve size C B E G D H Weight SVA kg SVA kg Specified weights are approximate values only. SVA (½ - 1½ ) in angleway version with cap / hand wheel SVA-xx x x ANG CAP SVA-xx x x ANG H-WHEEL Valve size K C max.1 C max.2 G D 1 D 2 H Weight SVA-S SVA kg SVA (½ - ¾) lb SVA kg SVA (1-1½) lb SVA-S, Socket weld SVA kg SVA (1¼ - 1½) lb SVA-L SVA kg SVA (½ - ¾) lb SVA kg SVA (1-1½) lb SVA-L, Socket weld SVA kg SVA (1¼ - 1½) lb Specified weights are approximate values only. 8 DKRCI.PD.KD1.A2.02 / 520H5936 Danfoss A/S (AC-MCI/MWA),
9 Dimensions and weights SVA (½ - 1½ ) straightway version with cap / hand wheel SVA-xx x x SR CAP SVA-xx x x SR H-WHEEL Valve size K C max.1 C max.2 B max.1 B max.2 E G D 1 D 2 H Weight SVA-S SVA kg SVA (½ - ¾) lb SVA kg SVA (1-1½) lb SVA-S, Socket weld SVA kg SVA (1¼) lb SVA kg SVA (1½) lb SVA-L SVA kg SVA (½ - ¾) lb SVA kg SVA (1-1½) lb SVA-L, Socket weld SVA kg SVA (1¼) lb SVA kg SVA (1½) lb Specified weights are approximate values only. Dimensions and weights SVA (2-2½ ) in angleway version with cap / hand wheel SVA-xx x x ANG CAP SVA-xx x x ANG H-WHEEL Valve size K C max.1 C max.2 G D 1 D 2 H Weight SVA-S SVA kg SVA (2) lb SVA kg SVA (2½) lb SVA-S, Socket weld SVA kg SVA (2) lb Specified weights are approximate values only. Danfoss A/S (AC-MCI/MWA), DKRCI.PD.KD1.A2.02 / 520H5936 9
10 Dimensions and weights SVA (2-2½ ) in straightway version with cap / hand wheel SVA-xx x x SR CAP SVA-xx x x SR H-WHEEL Valve size K B max.1 B max.2 C max.1 C max.2 E G D 1 D 2 H Weight SVA-S SVA kg SVA (2) lb SVA kg SVA (2½) lb SVA-S, Socket weld SVA kg SVA (2) lb Specified weights are approximate values only. 10 DKRCI.PD.KD1.A2.02 / 520H5936 Danfoss A/S (AC-MCI/MWA),
11 Dimensions and weights SVA (3-8 ) angleway version with cap / hand wheel SVA-xx x x ANG CAP SVA-xx x x ANG H-WHEEL Valve size K C max.1 C max.2 G D 1 D 2 H Weight SVA-S SVA 80 SVA (3) SVA 100 SVA (4) SVA 125 SVA (5) SVA 150 SVA (6) SVA 200 SVA (8) Specified weights are approximate values only kg 21.4 lb 15.3 kg 33.7 lb 28.1 kg 61.9 lb 39.7 kg 87.5 lb 79.5 kg lb Danfoss A/S (AC-MCI/MWA), DKRCI.PD.KD1.A2.02 / 520H
12 Dimensions and weights SVA (3-8 ) straightway version with cap / hand wheel SVA-xx x x SR CAP SVA-xx x x SR H-WHEEL Valve size K B max.1 B max.2 C max.1 C max.2 E G D 1 D 2 H Weight SVA-S SVA 80 SVA (3) SVA 100 SVA (4) SVA 125 SVA (5) SVA 150 SVA (6) SVA 200 SVA (8) Specified weights are approximate values only kg 24.0 lb 18.2 kg 40.1 lb 32.8 kg 72.3 lb 60.0 kg lb kg lb 12 DKRCI.PD.KD1.A2.02 / 520H5936 Danfoss A/S (AC-MCI/MWA),
13 Ordering Available connection sizes SVA-S: he S means Standard bonnet length (sizes from DN50 to DN200 are insulation friendly) SVA-L: he L means Long bonnet length (insulation friendly) SVA-S SVA-L 6 x - 10 x - 15 x x 20 x x 25 x x 32 x x 40 x x 50 x 65 x 80 x 100 x 125 x 150 x Please note that the type codes only serve to identify the valves, some of which may not form part of the standard product range. For further information please contact your local Danfoss Sales Company. ype codes Valve type SVA Stop valve Nominal size in (valve size measured on the connection diameter) Connections Valve housing Other equipment Available connections A/D SOC FP 6 DN 6 ( 1 / 4 ) x x 10 DN 10 ( 3 /8) x x 15 DN 15 (½) x x x 20 DN 20 (¾) x x x 25 DN 25 (1) x x x 32 DN 32 (1¼) x x x 40 DN 40 (1½) x x 50 DN 50 (2) x x 65 DN 65 (2½) x 80 DN 80 (3) x 100 DN 100 (4) x 125 DN 125 (5) x 150 DN 150 (6) x 200 DN 200 (8) x A D SOC FP ANG SR H-WHEEL CAP Butt-weld connection: ANSI B schedule 80, DN (½ - 1½ ) Butt-weld connection: ANSI B schedule 40, DN (2-8 ) Butt-weld connection: DIN EN Socket weld: ANSI B Female Pipe hread NP: ANSI/ASME B Outside threaded connections ISO 228/1 Pipe thread Angle flow Straight flow Hand wheel Cap Important! Where products need to be certified according to specific certification societies or where higher pressures are required, the relevant information should be included at the time of order. Danfoss A/S (AC-MCI/MWA), DKRCI.PD.KD1.A2.02 / 520H
14 Ordering SVA-S Example: SVA-S 20 DIN angleway with hand wheel = 148B5300 Important! Where products need to be certified according to specific certification societies or where higher pressures are required, the relevant information should be included at the time of order. ANG SR = Angle-way = Straight-way CAP = Cap H-WHEEL = Hand wheel SVA-S Angleway MWP ype bar psi Code number Butt-weld DIN (EN 10220) 6 ¼ SVA-S 6 D ANG H-WHEEL B ¼ SVA-S 6 D ANG CAP B /₈ SVA-S 10 D ANG H-WHEEL B /₈ SVA-S 10 D ANG CAP B ½ SVA-S 15 D ANG H-WHEEL B ½ SVA-S 15 D ANG CAP B ¾ SVA-S 20 D ANG H-WHEEL B ¾ SVA-S 20 D ANG CAP B SVA-S 25 D ANG H-WHEEL B SVA-S 25 D ANG CAP B ¼ SVA-S 32 D ANG H-WHEEL B ¼ SVA-S 32 D ANG CAP B ½ SVA-S 40 D ANG H-WHEEL B ½ SVA-S 40 D ANG CAP B SVA-S 50 D ANG H-WHEEL B SVA-S 50 D ANG CAP B ½ SVA-S 65 D ANG H-WHEEL B ½ SVA-S 65 D ANG CAP B SVA-S 80 D ANG H-WHEEL B SVA-S 80 D ANG CAP B SVA-S 100 D ANG H-WHEEL B SVA-S 100 D ANG CAP B SVA-S 125 D ANG H-WHEEL B SVA-S 125 D ANG CAP B SVA-S 150 D ANG H-WHEEL B SVA-S 150 D ANG CAP B SVA-S 200 D ANG H-WHEEL B SVA-S 200 D ANG CAP B6301 Butt-weld ANSI (B Schedule 80) 6 ¼ SVA-S 6 A ANG H-WHEEL B ¼ SVA-S 6 A ANG CAP B /₈ SVA-S 10 A ANG H-WHEEL B /₈ SVA-S 10 A ANG CAP B ½ SVA-S 15 A ANG H-WHEEL B ½ SVA-S 15 A ANG CAP B ¾ SVA-S 20 A ANG H-WHEEL B ¾ SVA-S 20 A ANG CAP B SVA-S 25 A ANG H-WHEEL B SVA-S 25 A ANG CAP B ¼ SVA-S 32 A ANG H-WHEEL B ¼ SVA-S 32 A ANG CAP B ½ SVA-S 40 A ANG H-WHEEL B ½ SVA-S 40 A ANG CAP B5621 Butt-weld ANSI (B Schedule 40) 50 2 SVA-S 50 A ANG H-WHEEL B SVA-S 50 A ANG CAP B ½ SVA-S 65 A ANG H-WHEEL B ½ SVA-S 65 A ANG CAP B SVA-S 80 A ANG H-WHEEL B SVA-S 80 A ANG CAP B SVA-S 100 A ANG H-WHEEL B SVA-S 100 A ANG CAP B SVA-S 125 A ANG H-WHEEL B SVA-S 125 A ANG CAP B SVA-S 150 A ANG H-WHEEL B SVA-S 150 A ANG CAP B SVA-S 200 A ANG H-WHEEL B SVA-S 200 A ANG CAP B6321 Socket welding ANSI (B 16.11) 15 ½ SVA-S 15 SOC ANG H-WHEEL B ½ SVA-S 15 SOC ANG CAP B ¾ SVA-S 20 SOC ANG H-WHEEL B ¾ SVA-S 20 SOC ANG CAP B SVA-S 25 SOC ANG H-WHEEL B SVA-S 25 SOC ANG CAP B ¼ SVA-S 32 SOC ANG H-WHEEL B ¼ SVA-S 32 SOC ANG CAP B ½ SVA-S 40 SOC ANG H-WHEEL B ½ SVA-S 40 SOC ANG CAP B SVA-S 50 SOC ANG H-WHEEL B SVA-S 50 SOC ANG CAP B5723 FP inside pipe thread, NP (ANSI/ASME B ) 15 ½ SVA-S 15 FP ANG H-WHEEL B ½ SVA-S 15 FP ANG CAP B ¾ SVA-S 20 FP ANG H-WHEEL B ¾ SVA-S 20 FP ANG CAP B SVA-S 25 FP ANG H-WHEEL B SVA-S 25 FP ANG CAP B ¼ SVA-S 32 FP ANG H-WHEEL B ¼ SVA-S 32 FP ANG CAP B5525 outside pipe thread, (ISO 228/1) 6 ¼ SVA-S 6 ANG CAP B5032 SVA-S Straightway MWP ype bar psi Code number Butt-weld DIN (EN 10220) 6 ¼ SVA-S 6 D SR H-WHEEL B ¼ SVA-S 6 D SR CAP B /₈ SVA-S 10 D SR H-WHEEL B /₈ SVA-S 10 D SR CAP B ½ SVA-S 15 D SR H-WHEEL B ½ SVA-S 15 D SR CAP B ¾ SVA-S 20 D SR H-WHEEL B ¾ SVA-S 20 D SR CAP B SVA-S 25 D SR H-WHEEL B SVA-S 25 D SR CAP B ¼ SVA-S 32 D SR H-WHEEL B ¼ SVA-S 32 D SR CAP B ½ SVA-S 40 D SR H-WHEEL B ½ SVA-S 40 D SR CAP B SVA-S 50 D SR H-WHEEL B SVA-S 50 D SR CAP B ½ SVA-S 65 D SR H-WHEEL B ½ SVA-S 65 D SR CAP B SVA-S 80 D SR H-WHEEL B SVA-S 80 D SR CAP B SVA-S 100 D SR H-WHEEL B SVA-S 100 D SR CAP B SVA-S 125 D SR H-WHEEL B SVA-S 125 D SR CAP B SVA-S 150 D SR H-WHEEL B SVA-S 150 D SR CAP B SVA-S 200 D SR H-WHEEL B SVA-S 200 D SR CAP B6311 Butt-weld ANSI (B Schedule 80) 6 ¼ SVA-S 6 A SR H-WHEEL B ¼ SVA-S 6 A SR CAP B /₈ SVA-S 10 A SR H-WHEEL B /₈ SVA-S 10 A SR CAP B ½ SVA-S 15 A SR H-WHEEL B ½ SVA-S 15 A SR CAP B ¾ SVA-S 20 A SR H-WHEEL B ¾ SVA-S 20 A SR CAP B SVA-S 25 A SR H-WHEEL B SVA-S 25 A SR CAP B ¼ SVA-S 32 A SR H-WHEEL B ¼ SVA-S 32 A SR CAP B ½ SVA-S 40 A SR H-WHEEL B ½ SVA-S 40 A SR CAP B5631 Butt-weld ANSI (B Schedule 40) 50 2 SVA-S 50 A SR H-WHEEL B SVA-S 50 A SR CAP B ½ SVA-S 65 A SR H-WHEEL B ½ SVA-S 65 A SR CAP B SVA-S 80 A SR H-WHEEL B SVA-S 80 A SR CAP B SVA-S 100 A SR H-WHEEL B SVA-S 100 A SR CAP B SVA-S 125 A SR H-WHEEL B SVA-S 125 A SR CAP B SVA-S 150 A SR H-WHEEL B SVA-S 150 A SR CAP B SVA-S 200 A SR H-WHEEL B SVA-S 200 A SR CAP B6331 Socket welding ANSI (B 16.11) 15 ½ SVA-S 15 SOC SR H-WHEEL B ½ SVA-S 15 SOC SR CAP B ¾ SVA-S 20 SOC SR H-WHEEL B ¾ SVA-S 20 SOC SR CAP B SVA-S 25 SOC SR H-WHEEL B SVA-S 25 SOC SR CAP B ¼ SVA-S 32 SOC SR H-WHEEL B ¼ SVA-S 32 SOC SR CAP B ½ SVA-S 40 SOC SR H-WHEEL B ½ SVA-S 40 SOC SR CAP B SVA-S 50 SOC SR H-WHEEL B SVA-S 50 SOC SR CAP B5733 FP inside pipe thread, NP (ANSI/ASME B ) 15 ½ SVA-S 15 FP SR H-WHEEL B ½ SVA-S 15 FP SR CAP B ¾ SVA-S 20 FP SR H-WHEEL B ¾ SVA-S 20 FP SR CAP B SVA-S 25 FP SR H-WHEEL B SVA-S 25 FP SR CAP B ¼ SVA-S 32 FP SR H-WHEEL B ¼ SVA-S 32 FP SR CAP B DKRCI.PD.KD1.A2.02 / 520H5936 Danfoss A/S (AC-MCI/MWA),
15 Ordering SVA-L Example: SVA-L 20 DIN angleway with hand wheel = 148B5340 Important! Where products need to be certified according to specific certification societies or where higher pressures are required, the relevant information should be included at the time of order. ANG SR = Angle-way = Straight-way CAP = Cap H-WHEEL = Hand wheel SVA-L Angleway MWP ype bar psi Code number Butt-weld DIN (EN 10220) 15 ½ SVA-L 15 D ANG H-WHEEL B ½ SVA-L 15 D ANG CAP B ¾ SVA-L 20 D ANG H-WHEEL B ¾ SVA-L 20 D ANG CAP B SVA-L 25 D ANG H-WHEEL B SVA-L 25 D ANG CAP B ¼ SVA-L 32 D ANG H-WHEEL B ¼ SVA-L 32 D ANG CAP B ½ SVA-L 40 D ANG H-WHEEL B ½ SVA-L 40 D ANG CAP B5641 Butt-weld ANSI (B Schedule 80) 15 ½ SVA-L 15 A ANG H-WHEEL B ½ SVA-L 15 A ANG CAP B ¾ SVA-L 20 A ANG H-WHEEL B ¾ SVA-L 20 A ANG CAP B SVA-L 25 A ANG H-WHEEL B SVA-L 25 A ANG CAP B ¼ SVA-L 32 A ANG H-WHEEL B ¼ SVA-L 32 A ANG CAP B ½ SVA-L 40 A ANG H-WHEEL B ½ SVA-L 40 A ANG CAP B5661 Socket welding ANSI (B 16.11) 15 ½ SVA-L 15 SOC ANG H-WHEEL B ½ SVA-L 15 SOC ANG CAP B ¾ SVA-L 20 SOC ANG H-WHEEL B ¾ SVA-L 20 SOC ANG CAP B SVA-L 25 SOC ANG H-WHEEL B SVA-L 25 SOC ANG CAP B ¼ SVA-L 32 SOC ANG H-WHEEL B ¼ SVA-L 32 SOC ANG CAP B ½ SVA-L 40 SOC ANG H-WHEEL B ½ SVA-L 40 SOC ANG CAP B5663 FP inside pipe thread, NP (ANSI/ASME B ) 15 ½ SVA-L 15 FP ANG H-WHEEL B ½ SVA-L 15 FP ANG CAP B ¾ SVA-L 20 FP ANG H-WHEEL B ¾ SVA-L 20 FP ANG CAP B SVA-L 25 FP ANG H-WHEEL B SVA-L 25 FP ANG CAP B ¼ SVA-L 32 FP ANG H-WHEEL B ¼ SVA-L 32 FP ANG CAP B5565 SVA-L Straightway MWP ype bar psi Code number Butt-weld DIN (EN 10220) 15 ½ SVA-L 15 D SR H-WHEEL B ½ SVA-L 15 D SR CAP B ¾ SVA-L 20 D SR H-WHEEL B ¾ SVA-L 20 D SR CAP B SVA-L 25 D SR H-WHEEL B SVA-L 25 D SR CAP B ¼ SVA-L 32 D SR H-WHEEL B ¼ SVA-L 32 D SR CAP B ½ SVA-L 40 D SR H-WHEEL B ½ SVA-L 40 D SR CAP B5651 Butt-weld ANSI (B Schedule 80) 15 ½ SVA-L 15 A SR H-WHEEL B ½ SVA-L 15 A SR CAP B ¾ SVA-L 20 A SR H-WHEEL B ¾ SVA-L 20 A SR CAP B SVA-L 25 A SR H-WHEEL B SVA-L 25 A SR CAP B ¼ SVA-L 32 A SR H-WHEEL B ¼ SVA-L 32 A SR CAP B ½ SVA-L 40 A SR H-WHEEL B ½ SVA-L 40 A SR CAP B5671 Socket welding ANSI (B 16.11) 15 ½ SVA-L 15 SOC SR H-WHEEL B ½ SVA-L 15 SOC SR CAP B ¾ SVA-L 20 SOC SR H-WHEEL B ¾ SVA-L 20 SOC SR CAP B SVA-L 25 SOC SR H-WHEEL B SVA-L 25 SOC SR CAP B ¼ SVA-L 32 SOC SR H-WHEEL B ¼ SVA-L 32 SOC SR CAP B ½ SVA-L 40 SOC SR H-WHEEL B ½ SVA-L 40 SOC SR CAP B5673 FP inside pipe thread, NP (ANSI/ASME B ) 15 ½ SVA-L 15 FP SR H-WHEEL B ½ SVA-L 15 FP SR CAP B ¾ SVA-L 20 FP SR H-WHEEL B ¾ SVA-L 20 FP SR CAP B SVA-L 25 FP SR H-WHEEL B SVA-L 25 FP SR CAP B ¼ SVA-L 32 FP SR H-WHEEL B ¼ SVA-L 32 FP SR CAP B5575 Accessories 6 and Nipple Kit solution Code no. 148B4244 ACCESSORY WELD.NIPPLE DN10 D + UNION NU 148B4245 ACCESSORY WELD.NIPPLE DN6 A + UNION NU 148B4246 ACCESSORY WELD.NIPPLE DN10 A + UNION NU 148B4247 ACCESSORY WELD.NIPPLE DN15 A + UNION NU 148B4184 ACCESSORY WELD.NIPPLE DN6 D + UNION NU 148B4185 ACCESSORY WELD.NIPPLE DN15 D + UNION NU Danfoss A/S (AC-MCI/MWA), DKRCI.PD.KD1.A2.02 / 520H
16 16 DKRCI.PD.KD1.A2.02 / 520H5936 Danfoss A/S (AC-MCI/MWA),
Stop valves SVA-S and SVA-L
MAKING MODERN LIVING POSSIBLE echnical brochure Stop valves SVA-S and SVA-L SVA Stop Valves are available in angleway and straightway versions and with Standard neck (SVA-S) and Long neck (SVA-L) he stop
More informationShut-off valves Types SVA-S and SVA-L
Data sheet Shut-off valves Types SVA-S and SVA-L SVA shut-off valves are available in angleway and straightway versions and with Standard neck (SVA-S) and Long neck (SVA-L) The shut-off valves are designed
More informationShut-off valves in stainless steel Types SVA-S SS and SVA-L SS
Data sheet Shut-off valves in stainless steel s SVA-S SS and SVA-L SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for
More informationShut-off valves in stainless steel SVA-S SS
Technical brochure Shut-off valves in stainless steel In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for high surface protection
More informationStop valves SVA-DL & SVA-DH
MAKING MODERN LIVING POSSIBLE Technical brochure Stop valves SVA-DL & SVA-DH 250-300 SVA-DL and SVA-DH are angleway stop valves designed to meet all industrial refrigeration application requirements. SVA-DL
More informationRefrigeration and Air Conditioning Controls. Technical leaflet. Stop valves type SVA 6-10 REFRIGERATION AND AIR CONDITIONING
Refrigeration and Air Conditioning Controls Technical leaflet Stop valves type SVA 6-10 REFRIGERATION AND AIR CONDITIONING Contents Page Introduction... 3 Features... 3 Design... 4 Technical data... 4
More informationShut-off valves Types SVA-DL and SVA-DH
Data sheet Shut-off valves Types SVA-DL and SVA-DH 250-300 SVA-DL and SVA-DH are angleway shut-off valves designed to meet all industrial refrigeration application requirements. SVA-DL (Delta pressure
More informationStop check valves, SCA-X Check valves, CHV-X
MAKING MODERN LIVING POSSIBLE Technical brochure Stop check valves, SCA-X Check valves, CHV-X SCA-X are check valves with a built-in stop valve function. CHV-X are check valves only. SCA-X/CHV-X are available
More informationSVL product range with butt-weld connection F
Data sheet SVL product range with butt-weld connection F The new range of products for Industrial Refrigeration - SVL is based on the successful modular platform concept from the ICF and ICV valves. The
More informationFilter FIA and FIA-SS
MAKING MODERN LIVING POSSIBLE Technical brochure FIA and FIA-SS FIA filters are a range of angle-way and straight-way filters which are carefully designed to give favourable flow conditions. The design
More informationStop check valves type SCA , SCA-SS Check valves type CHV , CHV-SS Technical leaflet REFRIGERATION AND AIR CONDITIONING
Stop check valves type SCA 15-125, SCA-SS 15-40 Check valves type CHV 15-125, CHV-SS 15-40 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction.......................................................................................
More informationStop check valves type SCA Check valves type CHV Technical leaflet REFRIGERATION AND AIR CONDITIONING
Stop check valves type SCA 15-125 Check valves type CHV 15-125 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction.......................................................................................
More informationCheck & stop valve, SCA-X Check valve, CHV-X
Data sheet Check & stop valve, SCA-X Check valve, CHV-X SCA-X are check valves with a built-in shut-off valve function. CHV-X are check valves only. SCA-X/CHV-X are available in angleway versions. The
More informationShut-off Check valves and regulating valves for for Industrial Refrigeration
Catalogue Shut-off Check valves and regulating valves for for Industrial Refrigeration Contents Page Check & stop valves, type SCA-X - Check valve, type CHV-X, 52 bar (754 psi)... 3 Check & stop valves,
More informationFilter type FIA (½ - 12 in.) type FIA-SS (½ - 2½ in.) REFRIGERATION AND AIR CONDITIONING. Technical leaflet
type FIA 5-00 (½ - 2 ) type FIA-SS 5-65 (½ - 2½ ) REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................
More informationShut-off Check valves and regulating valves for for Industrial Refrigeration
Catalogue Shut-off Check valves and regulating valves for for Industrial Refrigeration Contents Page Check & stop valves, type SCA-X - Check valve, type CHV-X...3 Check & stop valves in stainless steel,
More informationFilter type FIA (½ - 12 in.) REFRIGERATION AND AIR CONDITIONING. Technical leaflet
type FIA 5-00 (½ - 2 ) REFRIGERATION AND AIR CONDITIONING Technical leaflet , type FIA 5-00 ( / 2-2 ) Contents Page Introduction........................................................................................
More informationSVL parts program 65 bar (943 psi) series
Data sheet SVL parts program 65 bar (943 psi) series The new 65 bar SVL range for Industrial Refrigeration is based on the successful modular Standard SVL platform. The same flexibility, simplicity and
More informationPressure control valve Type KDC
Data sheet Pressure control valve Type KDC 65-00 The KDC valve is a pressure control valve. The valve controls the discharge pressure of the compressor to ensure fast build-up of pressure and lubrication
More informationStop Needle Valves SNV-ST and SNV-SS
MAKING MODERN LIVING POSSIBLE Technical brochure Stop Needle Valves and SNV-SS www.danfoss.com/ir Stop Needle Valve, type and SNV-SS Contents Page Introduction........................................................................................
More informationGauge valves Type SNV-ST and SNV-SS
Data sheet Gauge valves Type and SNV-SS and SNV-SS valves are designed to meet all industrial refrigeration application requirements. Designed as service valves they provide favourable flow characteristics.
More informationStrainers in stainless steel Type FIA SS
Data sheet Strainers in stainless steel Type FIA SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for high surface protection
More informationFloat valve Type HFI. Data sheet
Data sheet Float valve ype is a high pressure float valve with internal liquid measuring device. he float valve is designed for direct flange mounting or welding on to plate heat exchanger type condensers,
More informationPilot Controlled Servo Valves ICS
MAKING MODERN LIVING POSSIBLE Technical brochure Pilot Controlled Servo Valves ICS ICS servo valves belong to the ICV (Industrial Control Valve) family and are one of two product groups. ICV types ICS
More informationPilot valves for servo operated main valves
MAKING MODERN LIVING POSSIBLE Technical brochure Pilot valves for servo operated main valves Pilot valves for direct mounting in main valves The range of pilot valves consists of: Constant-pressure pilot
More informationHigh pressure float valve, type HFI REFRIGERATION AND AIR CONDITIONING. Technical leaflet
High pressure float valve, type HFI REFRIGERAION AND AIR CONDIIONING echnical leaflet Contents Page Introduction........................................................................................3
More informationPilot-operated servo valve Type ICS
Data sheet Pilot-operated servo valve ICS ICS pilot-operated servo valves belong to the ICV (Industrial Control Valve) family. The valve comprises three main components: valve body, function module and
More informationFA + solenoid valve Type ICF 15/20 EVRAT
Data sheet FA + solenoid valve Type ICF 15/20 EVRAT Based on advanced technology the ICF EVRAT retrofit valve incorporates three functions in one housing, which can replace the widely used direct coupled
More informationPilot operated main valves for regulating pressure and temperature, type PM
MAKING MODERN LIVING POSSIBLE Technical brochure Pilot operated main valves for regulating pressure and temperature, type PM PM valves are pilot operated main valves for regulating pressure and temperature
More informationPilot-operated servo valve Type ICS
Data sheet Pilot-operated servo valve Type ICS The valve comprises three main components: valve body, function module and top cover. ICS pilot-operated servo valves are pilot operated valves for regulating
More informationPilot-operated servo valve Type ICS
Data sheet Pilot-operated servo valve Type ICS ICS pilot-operated servo valves belong to the ICV (Industrial Control Valve) family. The valve comprises three main components: valve body, function module
More informationPilot valves for servo operated main valves
MAKING MODERN LIVING POSSIBLE Technical brochure Pilot valves for servo operated main valves www.danfoss.com/ir Contents Page Introduction........................................................................................3
More informationFloat Switch AKS 38. Technical brochure MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Technical brochure Float Switch AKS 38 AKS 38 is an electro-mechanical float switch designed to provide a reliable, electromechanical response to liquid level changes. The
More informationPilot controlled servo valves Type ICS - Solenoid Valves Pressure Regulating Valves. Technical leaflet MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Pilot controlled servo valves Type ICS - Solenoid Valves Pressure Regulating Valves REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction...3 Features...3
More informationValve Station in stainless steel ICF SS 20 and ICF SS 25
Data sheet Valve Station in stainless steel ICF SS 20 and ICF SS 25 Based on advanced technology the ICF SS valve station incorporates several functions in one housing, which can replace a series of conventional
More informationShut-off valves SVA-DH, SVA-DL
Installation Guide Shut-off valves SVA-DH, SVA-DL 250-300 148R9510 Installation 148R9510 SVA-DH SVA-DL Fig. 1 Fig. 2 Fig. 3 Fig. 4 Nm LB-feet DN 250-300 370 272 Fig. 5a Fig. 5b Danfoss A/S (MWA), 2015-01
More informationLiquid level switch Type AKS 38
Data sheet Liquid level switch Type AKS 38 AKS 38 is an electro-mechanical liquid level switch designed to provide a reliable, electromechanical response to liquid level changes. The simple and basic design
More informationPilot valves Types CVP, CVPP, CVC, CVE, EVM and CVH
Data sheet Pilot valves Types CVP, CVPP, CVC, CVE, EVM and CVH Pilot valves for direct mounting in main valves Pilot valves are intended for mechanical control of a main valve and are ready for direct
More informationTemperature regulating valve Type ORV
Data sheet Temperature regulatg valve Type ORV ORV are 3-way dustrial valves for matag a constant oil temperature gas compressor systems, by mixg hot and cold oil the lubricatg system of e.g. screw or
More informationOne specification for the entire platform. Five different function modules could share a common housing.
One platform Multiple options The SVL Line Components - members of the SVL Flexline family. Flexibility is the key word and based on a common housing (angle- or straightway). The inserts in the SVL platform
More informationCapacity regulators (hot gas bypass) PMC and CVC
MAKING MODERN LIVING POSSIBLE Technical brochure Capacity regulators (hot gas bypass) PMC and CVC The PMC and CVC is used for capacity regulation in refrigeration, freezing and air conditioning plant for
More informationPilot valves for servo opereated main valves REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Pilot valves for servo opereated main valves REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
More informationValve Station ICF 20-40
Installation Guide Valve Station ICF 20-40 027R9782 Direction and position ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 with ICM ICM 027R9782 ICM ICM Fig. 1a Fig. 1b Fig. 1c ICM Welding TIG/MIG/SMAW welding Inlet
More informationMotor Valves type ICM Actuators type ICAD 600,900, 1200 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Motor Valves type ICM -1 Actuators type ICAD 600,900, 10 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction...3 The ICM Concept...4 Features (valve)...6 Design (valve)...6
More informationModulating liquid level regulators, direct-controlled SV 1 and SV 3
MAKING MODERN LIVING POSSIBLE Technical brochure Modulating liquid level regulators, direct-controlled SV 1 and SV 3 The SV 1 and 3 can be used separately as a modulating liquid level regulator in refrigerating,
More informationSolenoid valves type EVRA 3 to 40 and EVRAT 10 to 20
Solenoid valves type EVRA 3 to 40 and EVRAT 10 to 20 Contents Page Approval...569 Technical data...569 Ordering...570 Rated capacity...573 Capacity...573 Design / Function...577 Material specification............................................................................
More informationMotor operated valves and Actuators Type ICM and ICAD
Data sheet Motor operated valves and Actuators ICM and ICAD ICM motor operated valves belong to the ICV family and are one of two product groups. ICV types ICS - Pilot operated servo valve ICM - Motor
More informationMotor operated valves and Actuators ICM and ICAD 600A-1200A
Technical brochure Motor operated valves and Actuators ICM -1 and ICAD 600A-10A ICM motor operated valves belong to the ICV family and are one of two product groups. ICV types ICS - Pilot operated servo
More informationLiquid level control. Thermostatic liquid level regulators, type TEVA. High pressure float valve, type HFI
Liquid level control Contents Page Thermostatic liquid level regulators, type TEVA Introduction... 7 Materials... 7 Technical data... 7 Ordering... 8 Identification... 8 Capacity... 9 Design/Function...
More informationStainless Steel Valves
Stainless Steel Valves A-261T Y-Strainer screwed end, PN40, PSI800 Investment casting body Maximum working temperature 230 C The end-to-end length conforms to DIN 3202, Part 4. M8series (PN40) Thread ends
More informationGLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
More informationTwo-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
More informationTwo-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationIBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More information650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "L" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. his piston actuated diaphragm valve
More informationECOLINE GTC Type Series Booklet
Gate Valve ECOLINE GTC 150-600 Class 150-600 NPS 2''-36'' Cast Steel / Stainless Steel Bolted Bonnet Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet ECOLINE GTC 150-600
More informationBolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series
Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE
More informationTwo-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
More informationARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO
More informationARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO
More informationSolenoid valves EVRA and EVRAT
Data sheet Solenoid valves EVRA and EVRAT EVRA is a direct or servo operated solenoid valve for liquid, suction and hot gas lines with ammonia or fluorinated refrigerants. EVRA valves are supplied complete
More informationCE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
More informationBUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
More informationTable Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
More informationValves For Cryogenic Applications
Valves For Cryogenic Applications Red Dragon has been supplying specialist valve products to all industries for over 20 years and we are proud of our reputation for service, quality and speed of delivery.
More informationValve station ICF 15, ICF EVRAT, ICF 20, ICF SS 20
ICF 5, ICF EVRAT, ICF 0, ICF SS 0 a 4 5 5b 6 7 8 9 4 Stop, Check, Stop/check and Regulating valve module ICFS 5 Stop valve module 48B576 ICFS 0 Stop valve module 07L50 ICFS SS 0 Stop valve module 07L477
More informationInstallation, Operation and Maintenance Manual for the HE Series
Installation, Operation and Maintenance Manual for the HE Series High Performance Butterfly Valve "Double Offset" CONTENT IOM-HP-100614-1 1. INTRODUCTION 1.1 GENERAL NOTE 1.2 STRUCTURE & TYPE 1.3 OPERATION
More informationSempell High Pressure Stop Valves Model VA500 (ASME)
7 Sempell High Pressure Stop Valves Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/
More informationValve station ICF 15, ICF EVRAT, ICF 20, ICF SS 20
ICF 5, ICF EVRAT, ICF 0, ICF SS 0 a 4 5 5b 6 7 8 9 4 Stop, Check, Stop/check and Regulating valve module ICFS 5 Stop valve module 48B576 ICFS 0 Stop valve module 07L50 ICFS SS 0 Stop valve module 07L477
More information611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 462 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
More informationDOUBLE ECCENTRIC SOFT-SEATED Flanged and Semi-Lug Type
DOUBLE ECCENTRIC SOFT-SEATED Flanged and Semi-Lug Type MANUFACTURED BY Fire Safe LPG Page 1 Description LPG Specification : GVC - ACE Valve LPG Double Eccentric Soft Seated butterfly valve suitable low
More information-ANSI. maintenance-free. Stop valve with bellows seal,
Stop valve with bellow seal -ANSI ARI-FABA Long Life - Stop valve with bellows seal, maintenance-free ARI-FABA -ANSI Long Life Class 150 with flanges TA-Air (zero emission) TÜV-Test-No. 088-945053 Cast
More informationARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
More information611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
More informationSafety relief valves and double stop valves, type SFVL and DSVL REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves and double stop valves, type and REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Introduction The safety valves are backpressure dependent pressure relief valves.
More informationKO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
More informationGroup 16. Fittings Brass - Galvanized, AISI Pneumatics
Group 16 Fittings Brass - Galvanized, AISI 316 - Pneumatics 16 INDEX Page Contents 2 Index 3-4 Low pressure AISI 316, Brass and Galvanized Malleable Iron ransitions and Nipples 5-6 Brass Fittings Series
More informationA Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED. Gate, Globe & Check Valves.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED Gate, Globe & Check Valves. VALVITALIA VITAS DIVISION PLANT Some production example of Forged Steel Valves 2 Valves
More informationNELES FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS
NELES FLANGED FULL BORE BV BALL VALVE, SERIES 1 FOR PN RAINGS etso's Neles modular ball valve series 1, offers optimized performance of pulp and paper applications. Series, incorporates etso's leading
More informationSolenoid valves, type EVRA 3 40 and EVRAT REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves, type 40 and EVRAT 10 20 REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Solenoid valves type to 40 and EVRAT 10 to 20 Contents Page Introduction... 3 Approvals...
More informationType. 437 Safety Relief Valves spring loaded
Type Packed knob H4 437 Safety Relief Valves spring loaded Packed knob H4 Flanged connection Cap H2 Contents Chapter/Page Materials Available designs 01/02 Available designs materials 01/03 How to order
More informationFeatures BALL VALVES. Split Wafer. Carbon steel wafer PN ANSI 600 STANDARD FEATURES FEATURES ON REQUEST
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More information653, 654. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 653 / 654 manually operated 2/2-way metal diaphragm valve has a stainless steel bonnet and is available in two versions - GEMÜ 653 has a handwheel in high temperature
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationGrey cast iron SG iron Cast steel/ Forged steel High temperature steel Stainless steel Fig. 631 Page 2
CONA S Ball float steam trap Ball float steam trap Ball float steam trap PN16 / PN40 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3) - with butt
More informationINTRODUCTION AND STANDARD SPECIFICATIONS
INTRODUCTION AND STANDARD SPECIFICATIONS INTRODUCTION Instrument valves and manifolds are often used on general applications for liquid and gas service and are suitable for shutting-off impulse lines to
More informationMaintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1/5-10 BOA R -H Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16
More informationKEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions.
KEYSTONE The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck for insulation service.
More informationMounting and Operating Instructions EB 8111/8112 EN. Valve Series V2001 Globe Valve Type 3321
Valve Series V2001 Globe Valve Type 3321 Fig. 1 Type 3321 Valve with mounted rod-type yoke for pneumatic or electric actuators (partial view) Mounting and Operating Instructions EB 8111/8112 EN Edition
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all
More informationSempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
More informationSpring Loaded Safety Valve. SiC 11/13/14
Spring Loaded Safety Valve SiC 11/13/14 General Features and Benefits Acc. Directive 97/23/EC of the European Parliament and the Council of 29 May 1997 on the approximation of the laws of the Member States
More informationARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges TA
More informationPF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
More informationUNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
More informationABsOlute flow control. SERIES 3E // DN (6-16 ) // Oil & Gas // Power Generation // Petrochemistry
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
More informationPV4 and PV6 Piston Valves
Description The and are piston isolation valves that have been designed for use on steam, condensate and other liquid sytems. Available types: and Piston ¾" shown Screwed, butt weld and socket weld connections
More information