Medium Pressure Products

Transcription

1 Medium Pressure Products Fittings, Valves, Regulators and Hoses 6,000-20,000 PSI Range Catalog 4234 September 2005

2 MPI Medium Pressure Fittings Introduction Parker Hannifin Fittings* are engineered and manufactured to provide secure, tight, and leakresistant connections throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures in the range of 6,000 to 15,000 psi. Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including cold drawn - 1/8 hard (unannealed) tubing or instrument grade thick-walled annealed stainless steel. Every Parker Fitting is supplied complete and ready to install. dvanced Features Every MPI Fitting has the features shown below: Front ferrule with corrosion-resistant Parker SUPRCSE forms a tight pressure seal between the body and ferrule in a second strong mechanical hold on the tube. 2. Rear ferrule with corrosion-resistant Parker SUPRCSE provides a strong mechanical hold on the tube. 3. Longer thread area for improved resistance to pressure and load on the ferrules. 4. Molybdenum disulfide-coated inverted nut helps prevent galling, provides easier assembly, and permits multiple remakes. 5. Long tube-support area improves resistance to vibration and line loads. Materials and Identification Standard Fittings are made of Heat Code raceable 316 stainless steel. ubing and fitting materials should be selected based on compatibility with the fluid or gas media. Part numbers for Fittings use symbols that identify their style, size, and composition. MPI Fittings Pressure Ratings he maximum pressure rating is marked on each fitting. Fittings are designed to a 4 to 1 design factor. Size 4 end to 15,000 psi Size 6 end to 15,000 psi Size 8 end to 15,000 psi Size 9 end to 15,000 psi Size 12 end to 15,000 psi Size 16 end to 12,500 psi ssembly Fittings are installed with standard hand tools. Each size can be preset with a Parker hydraulic preset tool. ube preparation does not require cutting of threads or tube end coning. edication o Quality Our resources and vast product line, is available through our worldwide distribution network. For more information regarding our products and services, please contact your authorized Parker Instrumentation istributor. *Patent Pending 2 Parker Hannifin Corporation Huntsville, L US

3 MPI Medium Pressure Fittings ssembly, Remake & Gaugeability Instructions 1. Parker Fittings are sold completely assembled and ready for immediate use. Simply insert the tube as illustrated until it bottoms in the fitting body. (If the fitting is disassembled, note that the small tapered end of the ferrule(s) go into the fitting body.) 2. For Fittings, turn the nut to the finger-tight position. Hold the fitting body with a second wrench to prevent the body from turning as you continue tightening the nut. For hand assembly, tighten the nut 1-1/2 turns and for a preset connection (required for 3/4" and 1") tighten the nut 1/2 turn only. See page 27 for more information on preset connections. Parker recommends that you mark the nut (using a scribe or ink) to help you count the turns. 3. For maximum number of remakes, mark the fitting and nut before disassembly. efore retightening, make sure the assembly has been inserted into the fitting until the ferrule seats in the fitting. Retighten the nut by hand. Rotate the nut with a wrench to the original position as indicated by the previous marks lining up. ( noticeable increase in mechanical resistance will be felt indicating the ferrule is being re-sprung into sealing position.) 4. Finally, check the gap between the nut and the body hex with the end of the gauge by inserting the gauge (as shown) into the beveled gap between the nut and body hex. Gently turn the gauge (that is, it twists out ). However, if the gauge slides into the beveled gap, (does not twist out ) the fitting is not properly made up and you must check the entire assembly procedure. RNING FILURE, IMPROPER SELECION OR IMPROPER USE OF HE PROUCS N/OR SYSEMS ESCRIE HEREIN OR RELE IEMS CN CUSE EH, PERSONL INJURY N PROPERY MGE. his document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. he products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. Offer of Sale he items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. his offer and its acceptance are governed by the provisions stated in the Offer of Sale. Copyright 2004, 2005, Parker Hannifin Corporation. ll Rights Reserved. 3 Parker Hannifin Corporation Huntsville, L US

4 MPI Medium Pressure Fittings Catalog 4234 Visual Index Fittings FMP7 Male Connector...Page 9 XHMP7 37 Flare to Connector...Page 9 MP7H2X 37 Flare ulkhead to Connector... Page 10 X41HMP7 High Pressure to Connector... Page 10 X42HMP7 Medium Pressure to Connector... Page 11 GMP7 to Female NP Connector... Page 11 HMP7 to Union Connector... Page 13 X42H7 Medium Pressure to ube Stub... Page 17 MP7 ulkhead Union Connector... Page 14 7HO ube Stub to Male SE O-ring... Page 17 M40H7 ype M High Pressure Hose dapter to ube Stub... Page 17 GM7 ulkhead Union Connector... Page 14 EMP7 Union Elbow... Page 20 7E7 ube Elbow... Page 21 RMP7 ube Stub Reducer... Page 18 GM7 Male End to High Pressure C& Port... Page 14 7HG ube Stub to Female NP Pipe... Page 18 CMP7 to Male NP Elbow... Page 21 7H7 ube Port Connector... Page 15 MP7PC Port Connector... Page 19 7HF ube Stub to Male NP Pipe... Page 15 JMP7 Union ee... Page 22 NMP7 45 Union Elbow... Page 19 MP7H to SE Male O-ring Connector... Page 12 XH7 37 Flare to ube Stub... Page 16 M40HMP7 ype M High Pressure Hose to Connector.. Page 12 X41H7 High Pressure to ube Stub... Page 16 GH2MP7 ulkhead to Female NP... Page 13 RMP7 to Male Run NP ee to Male SE O-ring... Page 23 7N7 45 ube Stub Elbow... Page 20 SMP7 to Male ranch NP ee... Page 23 X47H7 Medium Pressure Port Connector to ube Stub... Page 16 4 Parker Hannifin Corporation Huntsville, L US h

5 Catalog 4234 MPI Medium Pressure Fittings & Products Visual Index OMP7 to NP Female ranch ee... Page 24 ssembly, Remake & Gaugeability Instructions...Page 3 hree ay/wo Stem Connection... Page 32 ypical Raw Materials...Page 6 H#XXXXX 9MP7-MPFL-40-SS 316SS H#XXXXX H#XXXXX all Check Valves... Page 37 How o Order...Page 6 KMP7 Union Cross... Page 24 Inline Filters... Page 36 ubing Selection Guide...Page 7 H#XXXXX 9MP7-MPCL-5-SS 316SS H#XXXXX 9MP7-MPNX--SS 316SS H#XXXXX Check Valves... Page 37 Gaugeability ools... Page 26 Hydraulic Preset ools... Page 27 H#XXXXX wo ay ngle Valves (Replaceable Seat)... Page 32 Medium Pressure Valves wo ay Inline Valves... Page 29 9MP7-MPCL-5-V-SS 316SS H#XXXXX Relief Valves (Factory Set)... Page 38 H Series all Valve... Page 39 FNMP7 Plug... Page 24 9MP7-MPNR--SS 316SS H#XXXXX 9MP7-MPNL--SS 316SS H#XXXXX FNM7 Plug... Page 25 PNMP7 Cap... Page 25 MPFF Front Ferrule... Page 25 wo ay ngle Valves... Page 30 Medium Pressure leed Valve... Page 33 Medium Pressure Gauge Valve... Page 33 9MP7-MPN--SS 316SS H#XXXXX MP Valve Connection ypes... Page 28 Medium Pressure Regulators Medium Pressure Regulators XPR Series... Page 39 hree ay/wo Pressure Connections... Page 31 wo ay all Valves... Page 34 How to Order... Page 33 9MP7-MPNXI--SS 316SS H#XXXXX MPF ack Ferrule... Page 26 H#XXXXX H#XXXXX 9MP7-MPLPKH-V-SSP 316SS H#XXXXX hree ay/one Pressure Connection... Page 31 hree ay all Valves... Page 35 MP7 Nut... Page 26 polyflex Hose 2020N Page N Page 40 H#XXXXX H#XXXXX H#XXXXX 9MP7-MPXPK-V-SSP 316SS H#XXXXX 9MP7-MPNXO--SS 316SS H#XXXXX How to Order...Page 41 5 Parker Hannifin Corporation Huntsville, L US

6 Medium Pressure Fittings Catalog 4234 ypical Raw Material Specifications asic Fitting Material ar Stock Forging SINLESS SEEL SME S-479 SME S (ype 316) (1) ype 316-SS S S31 S S31 IN 4401 IN 4401 (1) If additional information, including heat code traceability, is required, contact Parker Hannifin or your nearest Fitting distributor. (2) Parker Fittings work reliably on cold drawn - 1/8 hard tubing (both and Cone & hread), and fully annealed, heavy wall type 316 tubing. See page 8 for more information about tubing. ube End imensional ata Size No. ube O.. Straight hread C E 4 1/4 1/ /16 6 3/8 5/ /16 8 1/2 13/ /16 9 9/16 7/ /4 1 1/ / / /2 * L = Recommended Straight Length of Circular Un-bent ubing "" Inches "C" *L "" "E" How o Order Fittings Parker Fittings should be ordered using the part number as listed in this catalog. Part numbers are developed as follows: 1. combination of letters and numbers identifies the size and style of the fitting and the material used. 2. ube and pipe thread sizes are designated by the number of sixteenths of an inch (1/4" tube = 4/16 or 4). ll standard Fittings are manufactured from 316 stainless steel. Other materials are available upon special order. Straights and Elbows: Specify the largest end of the MPI first, followed by the smaller tube end OR pipe thread size. Example: Part number 4-4 HMP7 union would have the specifications listed below. 4-4 HMP7 ees: Example: Part number JMP7 would have the following specifications: JMP7 1 2 "L" 4-4 H MP7 - SS 1/4" 1/4" Union Medium Stainless ube ube Pressure Steel Inverted J MP7 - SS 9/16" 3/8" 3/8" ee Medium Stainless ube ube ranch Pressure Steel Inverted (1) (2) (3) Customer Requests: hen special configurations are required, please provide a blueprint of the installation to Parker with your request for a price quote. Cryogenic Service: fittings for cryogenic applications include a vent hole to prevent pressure build-up in front of the threads. o order vented parts, add -V to the end of the standard part number (e.g., 6-6 HMP7-SS becomes 6-6 HMP7-SS-V). 6 Parker Hannifin Corporation Huntsville, L US

7 Catalog 4234 Medium Pressure Fittings ubing Selection Guide lthough Parker s Fittings are engineered and manufactured to consistently provide high levels of reliability, no system s integrity is complete without considering the critical link: tubing. his section is intended to help you properly select and order quality tubing, both annealed and mediumpressure cold drawn - 1/8 hard (unannealed). Parker believes that proper tubing selection and installation are key to building leak-free, reliable tubing systems. Parker s Fittings have been designed to operate on a wide variety of medium pressure applications (6,000 to 15,000 psi). General Selection Criteria he data tables in this section will help you select the tubing that best satisfies the needs of the application. he most important consideration in the selection of suitable tubing for any application is the compatibility of the tubing materials with the media to be contained. System Pressure he system operating pressure is another important factor in determining the type, and more importantly, the size of tubing to be used. In general, high pressure installations require strong materials such as stainless steel.ube fitting assemblies should never be pressurized beyond the recommended working pressure. Maximum llowable orking Pressure ables able 1 lists 316 stainless steel along with its associated general applications and recommended temperature ranges. able 1 ubing Compatibility ubing General Recommended Material pplication emperature Range Stainless Steel High Pressure, -425 F to 1200 F (1) High emperature, (-255 C to 650 C) Generally Corrosive Media (1) For operating temperatures above 800 F (425 C), consideration should be given to media. 300 Series Stainless Steels are susceptible to carbide precipitation which may lead to intergranular corrosion at elevated temperatures. ll temperature ratings based on maximum rated temperatures per SME/NSI 31.3 Chemical Plant and Petroleum Refinery Piping Code, 1999 Edition. he information listed in able 1 is general in scope. For specific applications, please contact Parker s, Product Engineering epartment (256) Parker Hannifin Corporation Huntsville, L US

8 Medium Pressure Fittings Catalog 4234 ables 2, 3 and 4 list the maximum suggested working pressure of various tubing sizes, according to material. cceptable tubing diameters and wall thicknesses are those for which a rating is listed. Combinations which do not have a pressure rating are not recommended for use with Fittings. ubing tubing is marked MPI and is designed to provide optimum performance for fittings. tubing is nominal O ±.003") 316 seamless stainless steel, cold drawn - 1/8 hard (unannealed) tubing. ensile strength is approximately 40% higher than annealed tubing. able Stainless Steel (Seamless/Unannealed - 1/8 Hard) ube Nominal Nominal orking Size (in.) O (in.) I (in.) Pressure ube Part No. 1/ , MPIUE-SS-15K 3/ , MPIUE-SS-15K 9/ , MPIUE-SS-15K 3/ , MPIUE-SS-15K , MPIUE-SS-15K NOE: orking pressures calculated using an allowable stress of 35,000 psi for 1/8 hard 316 stainless steel tubing with a minimum tensile strength of 105,000 psi. NOE: Sizes 3/4" & 1" require hydraulic presetting when used with fittings. *Consult factory for pressure tables regarding other materials. Cone & hread ubing Cone & hread (C&) tubing is available as 1/8 hard 316 seamless stainless steel tubing and is designed to work with existing C& fittings. C& tubing has an undersized O by as much as.010" to better facilitate the coning and threading operations required for use with C& fittings. fittings work effectively with C& tubing as listed below but require hydraulic presetting for optimum performance. able Stainless Steel (Undersized O, Seamless (Unannealed - 1/8 Hard) ube Max Nominal orking ube Max Nominal orking Size O I Pressure Size O I Pressure (in.) (in.) (in.) (PSI) (in.) (in.) (in.) (PSI) 1/ ,500 9/ ,000 3/ ,500 3/ ,000 9/ , ,000 Instrumentation Grade Heavy all ubing able 4 ube O Size (in.) /4 10,300 13,300 3/8 6,600 8,600 10,000 11, Stainless Steel (Seamless/nnealed) 1/2 6,700 7,800 9,100 10,000 11,400 3/4 5,800 6,400 7,300 8,600 10, ,700 5,300 6,200 7,700 9,200 NOE: orking pressures calculated using an allowable stress of 20,000 psi for annealed 316 stainless steel tubing with a nominal O.. tolerance of ±.005". 8 Parker Hannifin Corporation Huntsville, L US

9 Catalog 4234 Medium Pressure Fittings FMP7 to Male NP Connector "" "" "" FMP7 "" NP HRES NP hreads PRKER PR NO. NP HRE ORKING 4-2 FMP7 1/4 1/ /8 15, FMP7 1/4 1/ /8 15, FMP7 1/4 3/ /4 15, FMP7 1/4 1/ /8 15, FMP7 3/8 1/ /4 15, FMP7 3/8 3/ /4 15, FMP7 3/8 1/ /8 15, FMP7 1/2 3/ , FMP7 1/2 1/ , FMP7 9/16 3/ /16 15, FMP7 9/16 1/ /16 15, FMP7 3/4 1/ /8 15, FMP7 3/4 3/ /8 10, FMP7 1 3/ /4 10, FMP /4 10,000 XHMP7 37º Flare to Connector PRKER PR NO. 37 O FLRE PER hreads HRE ORKING 4-4 XHMP7 1/4 1/ / /8 15, XHMP7 1/4 3/ / /4 15, XHMP7 1/4 1/ / , XHMP7 1/4 9/ / /16 15, XHMP7 3/8 1/ / /8 12, XHMP7 3/8 3/ / /4 12, XHMP7 3/8 1/ / , XHMP7 3/8 9/ / /16 12, XHMP7 1/2 3/ / /16 12, XHMP7 1/2 1/ / , XHMP7 1/2 9/ / /16 12, XHMP7 1/2 3/ / /8 12, XHMP / /4 7,200 9 Parker Hannifin Corporation Huntsville, L US

10 Medium Pressure Fittings Catalog 4234 MP7H2X 37º Flare ulkhead to Connector PRKER PR NO. 37 FLRE PER C ORKING 4-4 MP7H2X 1/4 1/ / /16 5/8 15, MP7H2X 3/8 3/ / /16 3/4 12, MP7H2X 1/2 1/ / , MP7H2X 9/16 1/ / /16 12,500 * ulkhead hole approximately 1/64" (.015") larger than thread major diameter. H MX HRE LN X41HMP7 High Pressure to Connector hreads PRKER PR NO. HIGH PER HRE ORKING 4-4 X41HMP7 1/4 1/ / /8 15, X41HMP7 1/4 3/ / /4 15, X41HMP7 3/8 1/ / /16 15, X41HMP7 3/8 3/ / /16 15, X41HMP7 3/8 9/ / /16 15, X41HMP7 9/16 3/ / /16 15, X41HMP7 9/16 9/ / /16 15, X41HMP7 9/16 3/ / /8 15, Parker Hannifin Corporation Huntsville, L US

11 Catalog 4234 Medium Pressure Fittings X42HMP7 Medium Pressure to Connector hreads PRKER PR NO. MEIUM PER HRE ORKING 4-4 X42HMP7 1/4 1/ / /8 15, X42HMP7 1/4 3/ / /4 15, X42HMP7 1/4 9/ / /16 15, X42HMP7 3/8 1/ / /4 15, X42HMP7 3/8 3/ / /4 15, X42HMP7 3/8 1/ / , X42HMP7 3/8 9/ / /16 15, X42HMP7 9/16 1/ / /8 15, X42HMP7 9/16 3/ / /8 15, X42HMP7 9/16 1/ / , X42HMP7 9/16 9/ / /16 15, X42HMP7 9/16 3/ /4-14 NPS 1 3/8 15, X42HMP7 3/4 9/ /4-14 NPS 1 1/16 15, X42HMP7 3/4 3/ /4-14 NPS 1 3/8 15, X42HMP7 3/ /4-14 NPS 1 3/4 12,500 GMP7 Female NP Connector NP ORKING PRKER NP PR NO. Size HRE 4-2 GMP7 1/4 1/ /16 15, GMP7 1/4 1/ , GMP7 1/4 3/ /8 15, GMP7 1/4 1/ /8 15, GMP7 3/8 1/ /16 15, GMP7 3/8 1/ , GMP7 3/8 3/ /8 15, GMP7 3/8 1/ /8 15, GMP7 1/2 1/ , GMP7 1/2 3/ /8 15, GMP7 1/2 1/ /8 15, GMP7 9/16 1/ /8 15, GMP7 9/16 3/ /8 15, GMP7 9/16 1/ /8 15, GMP7 3/4 1/ /8 15, Parker Hannifin Corporation Huntsville, L US

12 Medium Pressure Fittings Catalog 4234 MP7H to SE Male O-Ring Connector hreads PRKER PR NO. SE* EN HRE ORKING 4-4 MP7H 1/4 1/ / /8 12, MP7H 1/4 3/ / /16 12, MP7H 1/4 1/ /4-16 7/8 12, MP7H 3/8 1/ / /4 12, MP7H 3/8 3/ / /4 12, MP7H 3/8 1/ /4-16 7/8 12, MP7H 1/2 1/ / , MP7H 1/2 3/ / , MP7H 1/2 1/ / , MP7H 9/16 3/ / /16 12, MP7H 9/16 1/ / /16 12,500 *ll male o-ring ends for fittings are heavy duty and comply with SE J his end has maximum thread engagement for strength and requires the minimum full thread engagement specified in SE J9126 for the female port. Standard O-ring material is Nitrile #N M40HMP7 ype M High Pressure Hose to Connector PRKER PR NO. HOSE* PER * dapts to ype M Swivel Hose Connection. hreads HRE ORKING 6-4 M40HMP7-6 1/ / /8 15, M40HMP7-6 3/ / /4 15, M40HMP7-8 3/ / /16 15, M40HMP7-8 1/ / , M40HMP7-8 9/ / /16 15, M40HMP7-10 1/ / /16 15, M40HMP7-10 3/ / /16 15, M40HMP7-11 1/ /16 15, M40HMP7-11 9/ /16 15, M40HMP7-11 3/ /8 15, M40HMP / /4 12, Parker Hannifin Corporation Huntsville, L US

13 Catalog 4234 Medium Pressure Fittings GH2MP7 ulkhead to Female NP Connector H Max R hr d NP PRKER PR NO. NP HRE H Max. R HRE ORKING 4-4 GH2MP7 1/4 1/ / , GH2MP7 3/8 1/ / /8 15, GH2MP7 3/8 3/ / /2 10, GH2MP7 1/2 3/ / /2 10, GH2MP7 9/16 1/ / /8 15,000 * ulkhead hole approximately 1/64" (.015") larger than thread major diameter. HMP7 to Union Connector PRKER PR NO. ORKING 4-4 HMP7 1/ /8 15, HMP7 3/8-1/ /4 15, HMP7 3/ /4 15, HMP7 1/2-1/ , HMP7 1/2-3/ , HMP7 1/ , HMP7 9/16-1/ /16 15, HMP7 9/16-3/ /16 15, HMP7 9/16-1/ /16 15, HMP7 9/ /16 15, HMP7 3/4-3/ /8 15, HMP7 3/4-9/ /8 15, HMP7 3/ /8 15, HMP /4 12, Parker Hannifin Corporation Huntsville, L US

14 Medium Pressure Fittings Catalog 4234 MP7 ulkhead Union Connector PRKER PR NO. 4-4 MP7 1/ / , MP7 3/ / /8 15, MP7 1/ / /8 15, MP7 1/2-9/ / /8 15, MP7 9/16-1/ / /8 15, MP7 9/ / /8 15, MP7 3/ / /8 15, MP / /2 12,500 * ulkhead hole approximately 1/64" (.015") larger than thread major diameter. H MX *R hreads ORKING GM7 Male End to Female NP NP PRKER PR NO. MLE HRE 1 FEMLE NP EN 4-4 GM7 1/4 1/ / , GM7 1/4 3/ / /8 15, GM7 3/8 1/ / , GM7 3/8 3/ / /8 15, GM7 3/8 1/ / /8 15, GM7 1/2 1/ / , GM7 1/2 3/ / /8 15, GM7 1/2 1/ / /8 15, GM7 9/16 1/ / , GM7 9/16 3/ / /8 15, GM7 9/16 1/ / /8 15, GM7 3/4 1/ / /4 15, GM7 3/4 3/ / /4 15, GM7 3/4 1/ / /8 15,000 ¹ssemble 1/4 to 1/2 turn from finger tight & lubricate threads & taper before each remake. NP HRE ORKING GM7 Male End to High Pressure C& Port High Pressure Female - C& PRKER PR NO. MLE HRE 1 HIGH PRESS C& POR 4-4HF GM7 1/4 1/ / /4 15, HF GM7 3/8 1/ / /4 15, HF GM7 3/8 3/ / , HF GM7 1/2 1/ / /16 15, HF GM7 1/2 3/ / , HF GM7 9/16 1/ / , HF GM7 9/16 3/ / , HF GM7 3/4 1/ / /4 15, HF GM7 3/4 3/ / /4 15,000 ¹ssemble 1/4 to 1/2 turn from finger tight & lubricate threads & taper before each remake. C& HRE ORKING 14 Parker Hannifin Corporation Huntsville, L US

15 Catalog 4234 Medium Pressure Fittings 7H7 ube Port Connector L PRKER PR NO. UE * 4 7H7-SS 1/ , H7-SS 4.0 1/ , H7-SS 6.0 1/ , H7-SS 8.0 1/ , H7-SS / , H7-SS / ,000 * 6 7H7-SS 3/ , H7-SS 4.0 3/ , H7-SS 6.0 3/ , H7-SS 8.0 3/ , H7-SS / , H7-SS / ,000 * 9 7H7-SS 9/ , H7-SS 6.0 9/ , H7-SS 8.0 9/ , H7-SS / , H7-SS / ,000 * 12 7H7-SS 3/ , H7-SS 6.0 3/ , H7-SS 8.0 3/ , H7-SS / , H7-SS / ,000 ssemble 1/2 turn from finger tight. * Same ssembled Length as MP7PC. L ORKING 7HF ube Stub to Male NP Pipe PRKER PR NO. UE SU MLE NP EN 4-4 7HF 1/4 1/ /4-18 5/8 15, HF 1/4 3/ /8-18 3/4 15, HF 1/4 1/ /2-14 7/8 15, HF 3/8 1/ /4-18 5/8 15, HF 3/8 3/ /8-18 3/4 15, HF 3/8 1/ /2-14 7/8 15, HF 1/2 1/ /4-18 5/8 15, HF 1/2 3/ /8-18 3/4 15, HF 1/2 1/ /2-14 7/8 15, HF 9/16 1/ /4-18 5/8 15, HF 9/16 3/ /8-18 3/4 15, HF 9/16 1/ /2-14 7/8 15, HF 9/16 3/ / /8 10, HF 3/4 1/ /2-14 7/8 15, HF 3/4 3/ / /8 10,000 dd -Z6 to part number for part assembled with preset ferrules and nuts. NP HRE ORKING 15 Parker Hannifin Corporation Huntsville, L US

16 Medium Pressure Fittings Catalog 4234 XH7 37º Flare to ube Stub hreads PRKER PR NO. 37 FLRE PER UE SU 4-4 XH7 1/4 1/ / /2 15, XH7 1/4 3/ / /2 15, XH7 3/8 1/ / /8 12, XH7 3/8 3/ / /8 12, XH7 3/8 1/ / /8 12, XH7 3/8 9/ / /8 12, XH7 1/2 3/ / /16 12, XH7 1/2 1/ / /16 12, XH7 1/2 9/ / /16 12,500 HRE dd -Z6 to part number for part assembled with preset ferrules and nuts. ORKING X41H7 High Pressure to ube Stub hreads PRKER PR NO. HIGH PER UE SU 4-4 X41H7 1/4 1/ / /8 15, X41H7 1/4 3/ / /8 15, X41H7 1/4 1/ / /8 15, X41H7 1/4 9/ / /8 15, X41H7 3/8 1/ / /16 15, X41H7 3/8 3/ / /16 15, X41H7 3/8 1/ / /16 15, X41H7 3/8 9/ / /16 15, X41H7 9/16 1/ / /16 15, X41H7 9/16 3/ / /16 15, X41H7 9/16 1/ / /16 15, X41H7 9/16 9/ / /16 15,000 HRE dd -Z6 to part number for part assembled with preset ferrules and nuts. ORKING X47H7 Medium Pressure Port Connector to ube Stub K PRKER PR NO. MP POR CONNECOR #1 MPI UE SU # X47H7 1 9/ , X47H7 1 3/ , X47H ,500 End # 1 must be used with a Medium Pressure Gland. dd -Z6 to part number for part assembled with preset ferrules and nuts. K ORKING 16 Parker Hannifin Corporation Huntsville, L US

17 Catalog 4234 Medium Pressure Fittings X42H7 Medium Pressure to ube Stub hreads 7HO ube Stub to Male SE O-ring hreads PRKER PR NO. MEIUM PER UE SU 4-4 X42H7 1/4 1/ / /8 15, X42H7 1/4 3/ / /8 15, X42H7 1/4 1/ / /8 15, X42H7 1/4 9/ / /8 15, X42H7 3/8 1/ / /4 15, X42H7 3/8 3/ / /4 15, X42H7 3/8 1/ / /4 15, X42H7 3/8 9/ / /4 15, X42H7 9/16 1/ / /8 15, X42H7 9/16 3/ / /8 15, X42H7 9/16 1/ / /8 15, X42H7 9/16 9/ / /8 15, X42H7 9/16 3/ / /8 15, X42H7 3/4 9/ /4-14 NPS 1 1/8 15, X42H7 3/4 3/ /4-14 NPS 1 1/8 15,000 dd -Z6 to part number for part assembled with preset ferrules and nuts. PRKER PR NO. SE UE SU O-RING EN HRE ORKING 4-4 7HO 1/4 1/ / /16 12, HO 1/4 3/ / /16 12, HO 1/4 1/ /4-16 7/8 12, HO 3/8 1/ / /16 12, HO 3/8 3/ / /16 12, HO 3/8 1/ /4-16 7/8 12, HO 1/2 1/ / /16 12, HO 1/2 3/ / /16 12, HO 1/2 1/ /4-16 7/8 12, HO 9/16 1/ / /8 12, HO 9/16 3/ / /16 12, HO 9/16 1/ /4-16 7/8 12,500 dd -Z6 to part number for part assembled with preset ferrules and nuts. * ll male o-ring ends for MPI fittings are heavy duty and comply with SE J his end has maximum thread engagement for strength and requires the minimum full thread engagement specified in SE J9126 for the female port. Standard O-ring material is Nitrile #N HRE ORKING M40H7 ype M High Pressure Hose dapter to ube Stub hreads PRKER PR NO. HOSE* PER UE SU 6-4 M40H7-6 1/ / /8 15, M40H7-6 3/ / /8 15, M40H7-8 3/ / /16 15, M40H7-8 9/ / /16 15, M40H7-11 3/ /16 15, M40H7-11 9/ /16 15, M40H7-11 3/ /16 15, M40H7-16 3/ / /8 15, M40H / /8 12,500 HRE ORKING dd -Z6 to part number for part assembled with preset ferrules and nuts. 17 Parker Hannifin Corporation Huntsville, L US

18 Medium Pressure Fittings Catalog 4234 RMP7 ube Stub Reducer PRKER PR NO. UE SU #1 #2 4-6 RMP7 1/4 3/ /4 15, RMP7 1/4 1/ , RMP7 1/4 9/ /16 15, RMP7 3/8 1/ /8 15, RMP7 3/8 1/ , RMP7 3/8 9/ /16 15, RMP7 1/2 1/ /8 15, RMP7 1/2 3/ /4 15, RMP7 9/16 1/ /8 15, RMP7 9/16 3/ /4 15, RMP7 9/16 3/ /8 15, RMP7 3/4 1/ /16 15, RMP7 3/4 3/ /16 15, RMP7 3/4 9/ /16 15,000 dd -Z6 to part number for part assembled with preset ferrules and nuts. ORKING 7HG ube Stub to Female NP Pipe NP PRKER PR NO. UE SU FEMLE NP EN 4-2 7HG 1/4 1/ / /16 15, HG 1/4 1/ / , HG 1/4 1/ / /8 15, HG 3/8 1/ / /16 15, HG 3/8 1/ / , HG 3/8 1/ / /8 15, HG 1/2 1/ / /16 15, HG 1/2 1/ / , HG 1/2 1/ / /8 15, HG 9/16 1/ / , HG 9/16 1/ / /8 15, HG 3/4 1/ / /8 15, HG 3/4 3/ /4-11 1/2 1 1/2 10, HG /2 1 7/8 10,000 dd -Z6 to part number for part assembled with preset ferrules and nuts. NP HRE ORKING 18 Parker Hannifin Corporation Huntsville, L US

19 Catalog 4234 Medium Pressure Fittings MP7PC Port Connector K 1 2 PRKER PR NO. UE SU #1 POR # MP7PC 1/4 1/ , MP7PC 1/4 3/ , MP7PC 3/8 3/ , MP7PC 3/8 1/ , MP7PC 3/8 9/ , MP7PC 1/2 1/ , MP7PC 9/16 9/ , MP7PC 9/16 3/ , MP7PC 3/4 3/ , MP7PC 3/ , MP7PC ,500 1 ssemble 1/4 to 1/2 turn from finger tight. dd -Z6 to part number for part assembled with preset ferrules and nuts. K ORKING NMP7 45º Union Elbow PRKER L h k C 135 C PR NO. 4-4 NMP7 1/ /8 15, NMP7 3/ /4 15, NMP7 1/ , NMP7 9/ , NMP7 3/ /8 15,000 C L H K ORKING 19 Parker Hannifin Corporation Huntsville, L US

20 Medium Pressure Fittings Catalog N7 45º ube Stub Elbow PRKER L R 45 L PR NO. UE 4 7N7-SS 1/ ,000 * 4 7N7-SS 2.9 1/ , N7-SS 6.0 1/ , N7-SS 8.0 1/ , N7-SS / , N7-SS / , N7-SS 3/ ,000 * 6 7N7-SS 3.4 3/ , N7-SS 6.0 3/ , N7-SS 8.0 3/ , N7-SS / , N7-SS / , N7-SS 9/ ,000 * 9 7N7-SS 4.2 9/ , N7-SS 6.0 9/ , N7-SS 8.0 9/ , N7-SS / , N7-SS / , N7-SS 3/ , N7-SS 5.1 3/ , N7-SS 6.0 3/ , N7-SS 8.0 3/ , N7-SS / , N7-SS / ,000 ssemble 1/2 turn from finger tight. * Similar ssembled Lengths as NMP7 with wo (2) MP7PC s. H R ORKING EMP7 Union Elbow h k C H L L C H PRKER PR NO. C 4-4 EMP7 1/ /8 15, EMP7 3/ /4 15, EMP7 1/ , EMP7 9/ , EMP7 3/ /8 15, EMP /4 12,500 H L H K ORKING 20 Parker Hannifin Corporation Huntsville, L US

21 Catalog 4234 Medium Pressure Fittings 7E7 ube Elbow R H YP. PRKER PR NO. UE 4 7E7-SS 1/ ,000 * 4 7E7-SS 2.9 1/ , E7-SS 6.0 1/ , E7-SS 8.0 1/ , E7-SS / , E7-SS / , E7-SS 3/ ,000 * 6 7E7-SS 3.5 3/ , E7-SS 6.0 3/ , E7-SS 8.0 3/ , E7-SS / , E7-SS / ,000 * 9 7E7-SS 9/ , E7-SS 6.0 9/ , E7-SS 8.0 9/ , E7-SS / , E7-SS / , E7-SS 3/ , E7-SS 6.0 3/ , E7-SS 8.0 3/ , E7-SS / , E7-SS / ,000 ssemble 1/2 turn from finger tight. * Same ssembled Lengths as EMP7 with wo (2) MP7PC s. H R ORKING CMP7 to Male NP Elbow C L NP hreads PRKER PR NO. NP HRE C L ORKING 4-4 CMP7 1/4 1/ /4 15, CMP7 1/4 3/ /4 12, CMP7 1/4 1/ /4 10, CMP7 3/8 1/ /8 12, CMP7 3/8 3/ /8 12, CMP7 3/8 1/ /8 10, Parker Hannifin Corporation Huntsville, L US

22 Medium Pressure Fittings Catalog 4234 JMP7 Union ee C1 L C2 L 1 2 h k 3 L H PRKER PR NO. #1 #2 #3 C1 C2 H L ORKING JMP7 1/4 1/4 1/ /8 15, JMP7 3/8 3/8 3/ /4 15, JMP7 1/2 1/2 1/ , JMP7 9/16 9/16 9/ , JMP7 3/4 3/4 3/ /8 15, JMP /4 12,500 H K JMP7 1/4 1/4 3/ /4 15, JMP7 3/8 3/8 1/ /4 15, JMP7 3/8 1/4 1/ /4 15, JMP7 3/8 3/8 1/ , JMP7 3/8 3/8 9/ , JMP7 1/2 1/2 3/ , JMP7 1/2 3/8 3/ , JMP7 9/16 9/16 1/ , JMP7 9/16 9/16 3/ , JMP7 9/16 3/8 1/ , JMP7 9/16 3/8 3/ , JMP7 3/4 3/4 9/ /8 15, JMP / /4 12, JMP / /4 12, Parker Hannifin Corporation Huntsville, L US

23 Catalog 4234 Medium Pressure Fittings RMP7 to Male Run NP ee 1 C1 C2 2 C3 NP hreads 3 PRKER PR NO. #1 NP HR #2 #3 C1 C2 C3 ORKING RMP7 1/4 1/4-18 1/ /4 15, RMP7 1/4 1/4-18 3/ /8 12, RMP7 1/4 3/8-18 1/ /4 12, RMP7 1/4 3/8-18 3/ /8 12, RMP7 3/8 1/4-18 1/ /8 12, RMP7 3/8 1/4-18 3/ /8 12, RMP7 3/8 3/8-18 1/ /8 12, RMP7 3/8 3/8-18 3/ /8 12,000 SMP7 to Male ranch NP ee PRKER PR NO. #1 NP HR #2 #3 C1 C2 C3 ORKING SMP7 1/4 1/4 1/ /4 15, SMP7 1/4 3/8 3/ /4 12, SMP7 3/8 1/4 1/ /8 12, SMP7 3/8 3/8 3/ /8 12, Parker Hannifin Corporation Huntsville, L US

24 Medium Pressure Fittings Catalog 4234 OMP7 to NP Female ranch ee C1 L C2 L H h k NP PRKER PR NO. #1 NP #2 HR #3 C1 C2 C3 ORKING OMP7 1/4 1/4 1/ /4 15, OMP7 3/8 3/8 1/ /4 15, OMP7 3/8 3/8 1/ /8 15, OMP7 1/2 1/2 1/ /8 15, OMP7 9/16 9/16 1/ /8 15, OMP7 3/4 3/4 1/ /8 15,000 H K KMP7 Union Cross C L PRKER PR NO. 4 KMP7 1/ /8 15,000 6 KMP7 3/ /4 15,000 8 KMP7 1/ ,000 9 KMP7 9/ , KMP7 3/ /8 15,000 C L H K ORKING h k FNMP7 Plug PRKER PR NO. 4 FNMP7 1/ /16 15,000 6 FNMP7 3/ /16 15,000 8 FNMP7 1/ /16 15,000 9 FNMP7 9/ , FNMP7 3/ /4 15, FNMP /2 12,500 ssemble 1/4 to 1/2 turn from finger tight. ORKING 24 Parker Hannifin Corporation Huntsville, L US

25 Catalog 4234 Medium Pressure Fittings FNM7 Plug PRKER PR NO. 4 FNM7 1/ /16 15,000 6 FNM7 3/ /16 15,000 8 FNM7 1/ /16 15,000 9 FNM7 9/ , FNM7 3/ /4 15,000 ssemble 1/4 to 1/2 turn from finger tight and lubricate threads and taper before each remake. ORKING PNMP7 Cap PRKER PR NO. 4 PNMP7 1/ /8 15,000 6 PNMP7 3/ /4 15,000 8 PNMP7 1/ ,000 9 PNMP7 9/ /16 15, PNMP7 3/ /8 15, PNMP /4 12,500 ORKING MPFF Front Ferrule ube O.. PRKER PR NO. UE O.. FERRULE O.. 4 MPFF 1/ MPFF 3/ MPFF 1/ MPFF 9/ MPFF 3/ MPFF Parker Hannifin Corporation Huntsville, L US

26 Medium Pressure Fittings Catalog 4234 MPF ack Ferrule ube O.. PRKER PR NO. UE O.. FERRULE O.. 4 MPF 1/ MPF 3/ MPF 1/ MPF 9/ MPF 3/ MPF MP7 Nut PRKER PR NO. 4 MP7 1/ /16 6 MP7 3/ /16 8 MP7 1/ /16 9 MP7 9/ MP7 3/ /4 16 MP /2 Gaugeability ools Inspection Gauge MPIF Inspection Gauge his one handy gauge works for all sizes. he end of the gauge checks the fitting gap after make-up. 26 Parker Hannifin Corporation Huntsville, L US

27 Catalog 4234 Medium Pressure Fittings HYRULIC PRESE OOLS MPI Nut Size P.156 ody ie Nut ie ody ies and Nut ies Used with the MPI SMLL PRESE SSEMLY PRESE OY IE NU IE PR No. PR No. P NU 4 MPI OY IE 4 MPI NU IE ,000 6 MPI OY IE 6 MPI NU IE ,500 8 MPI OY IE 8 MPI NU IE ,500 9 MPI OY IE 9 MPI NU IE ,000 ody ies and Nut ies Used with the MPI LRGE PRESE SSEMLY PRESE OY IE NU IE PR No. PR No. P NU *9 MPI OY IE 9 MPI LRGE NU IE , MPI OY IE 12 MPI NU IE , MPI OY IE 16 MPI NU IE ,000 * Requires a 9 MPI OY IE PER PRKER PR NO. MPI SMLL PRESE SSEMLY PRKER PR NO. MPI LRGE PRESE SSEMLY PRKER PR NO. MPI IR PUMP KI PRKER PR NO. MPI HN PUMP KI Note: One Pump Kit, Preset ssembly, ody ie and Nut ie are required for presetting. Pump Kits and Preset ssemblies can be interchanged but ody ies and Nut ies are for a specific Preset ssembly. etailed operating instructions are included with each kit. 27 Parker Hannifin Corporation Huntsville, L US

28 Medium Pressure Valves Catalog 4234 Introduction Parker MPN series valves are designed for multi-turn control of media regulation and shutoff up to 20,000 psi. dditional packing materials are available for application temperatures from -300 to +800 F. Standard critical service design features, such as the packing below the thread and the non-rotating lower stem ensure longer valve life in rugged applications. Medium Pressure Valve Connection ypes F Female NP o 15,000 PSI MP7 Parker (Medium Pressure Inverted) o 15,000 PSI 7 Parker ube Stub o 15,000 PSI MF Cone & hread (Medium Pressure Female) o 20,000 PSI 1 2 Materials of Construction Item # escription Material 1 Soc Set Screw Steel 2 Handle luminum 3 Upper Stem ssembly 17-4PH 4 Packing Gland 316SS 5 Locking evice 300 SER. SS X 1/4 Fill H SCR. 300 SER. SS 7 Stem Pin 304SS 8 op Packing asher 416SS 9 Packing PFE 10 ottom Packing asher 316SS 11 Lower Stem 17-4PH-H ody 316SS 28 Parker Hannifin Corporation Huntsville, L US

29 Catalog 4234 Medium Pressure Valves wo ay Inline Valves Panel Hole Sizes Medium Pressure Needle Valve Panel Mount H G F C 9MP7-MPNL--SS 316SS H#XXXXX E VLVE SCRE 4 & & UING PRKER PR NO. PSI CONNECION ORIFICE C E F G H H'K 1/4" O.. 4MP7-MPNL--SS 15,000 1/4" MPI /8" O.. 6MP7-MPNL--SS 15,000 3/8" MPI /2" O.. 8MP7-MPNL--SS 15,000 1/2" MPI /16" O.. 9MP7-MPNL--SS 15,000 9/16" MPI /4" O.. 12MP7-MPNL--SS 15,000 3/4" MPI /4" O.. 12MP7-MPNLH--SS 10,000 3/4" MPI " O.. 16MP7-MPNL--SS 12,500 1" MPI " O.. 16MP7-MPNLH--SS 10,000 1" MPI PIPE PRKER PR NO. PSI CONNECION ORIFICE C E F G H H'K 1/8" NP 2F-MPNL--SS 15,000 1/8" NPF /4" NP 4F-MPNL--SS 15,000 1/4" NPF /8" NP 6F-MPNL--SS 15,000 3/8" NPF /2" NP 8F-MPNL--SS 15,000 1/2" NPF /4" NP 12F-MPNL--SS 10,000 3/4" NPF " NP 16F-MPNL--SS 10,000 1" NPF Parker Hannifin Corporation Huntsville, L US

30 Medium Pressure Valves Catalog 4234 wo ay ngle Valves Panel Hole Sizes Medium Pressure Needle Valve Panel Mount G H F 9MP7-MPN--SS 316SS H#XXXXX E VLVE SCRE 4 & & UING PRKER PR NO. PSI CONNECION ORIFICE C E F G H H'K 1/4" O.. 4MP7-MPN--SS 15,000 1/4" MPI /8" O.. 6MP7-MPN--SS 15,000 3/8" MPI /2" O.. 8MP7-MPN--SS 15,000 1/2" MPI /16" O.. 9MP7-MPN--SS 15,000 9/16 MPI /4" O.. 12MP7-MPN--SS 15,000 3/4" MPI /4" O.. 12MP7-MPNH--SS 10,000 3/4" MPI " O.. 16MP7-MPN--SS 12,500 1" MPI " O.. 16MP7-MPNH--SS 10,000 1" MPI PIPE PRKER PR NO. PSI CONNECION ORIFICE C E F G H H'K 1/8" NP 2F-MPN--SS 15,000 1/8" NPF /4" NP 4F-MPN--SS 15,000 1/4" NPF /8" NP 6F-MPN--SS 15,000 3/8" NPF /2" NP 8F-MPN--SS 15,000 1/2" NPF /4" NP 12F-MPN--SS 10,000 3/4" NPF " NP 16F-MPN--SS 10,000 1" NPF Parker Hannifin Corporation Huntsville, L US

31 Catalog 4234 Medium Pressure Valves hree ay/wo Pressure Connections Panel Hole Sizes Medium Pressure Needle Valve Panel Mount G H F C 9MP7-MPNXI--SS 316SS H#XXXXX E VLVE SCRE 4 & & UING PRKER PR NO. PSI CONNECION ORIFICE C E F G H H'K 1/4" O.. 4MP7-MPNXI--SS 15,000 1/4" MPI /8" O.. 6MP7-MPNXI--SS 15,000 3/8" MPI /2" O.. 8MP7-MPNXI--SS 15,000 1/2" MPI /16" O.. 9MP7-MPNXI--SS 15,000 9/16" MPI /4" O.. 12MP7-MPNXI--SS 15,000 3/4" MPI /4" O.. 12MP7-MPNXIH--SS 10,000 3/4" MPI " O.. 16MP7-MPNXI--SS 12,500 1" MPI " O.. 16MP7-MPNXIH--SS 10,000 1" MPI hree ay/one Pressure Connection Panel Hole Sizes Medium Pressure Needle Valve Panel Mount G H F C 9MP7-MPNXO--SS 316SS H#XXXXX E VLVE SCRE 4 & & UING PRKER PR NO. PSI CONNECION ORIFICE C E F G H H'K 1/4" O.. 4MP7-MPNXO--SS 15,000 1/4" MPI /8" O.. 6MP7-MPNXO--SS 15,000 3/8" MPI /2" O.. 8MP7-MPNXO--SS 15,000 1/2" MPI /16" O.. 9MP7-MPNXO--SS 15,000 9/16" MPI /4" O.. 12MP7-MPNXO--SS 15,000 3/4" MPI /4" O.. 12MP7-MPNXOH--SS 10,000 3/4" MPI " O.. 16MP7-MPNXO--SS 12,500 1" MPI " O.. 16MP7-MPNXOH--SS 10,000 1" MPI Parker Hannifin Corporation Huntsville, L US

32 Medium Pressure Valves Catalog 4234 hree ay/wo Stem Connection H G F Panel Hole Sizes Medium Pressure Needle Valve Panel Mount C E C 9MP7-MPNX--SS 316SS H#XXXXX VLVE SCRE 4 & & UING PRKER PR NO. PSI CONNECION ORIFICE C E F G H H'K 1/4" O.. 4MP7-MPNX--SS 15,000 1/4" MPI /8" O.. 6MP7-MPNX--SS 15,000 3/8" MPI /2" O.. 8MP7-MPNX--SS 12,500 1/2" MPI /16" O.. 9MP7-MPNX--SS 12,500 9/16" MPI /4" O.. 12MP7-MPNX--SS 15,000 3/4" MPI /4" O.. 12MP7-MPNXH--SS 10,000 3/4" MPI " O.. 16MP7-MPNX--SS 12,500 1" MPI " O.. 16MP7-MPNXH--SS 10,000 1" MPI wo ay ngle Valves (Replaceable Seat) Panel Hole Sizes Medium Pressure Needle Valve Panel Mount H G F 9MP7-MPNR--SS 316SS H#XXXXX E VLVE SCRE 4 & & UING PRKER PR NO. PSI CONNECION ORIFICE C E F G H H'K 1/4" O.. 4MP7-MPNR--SS 15,000 1/4" MPI /8" O.. 6MP7-MPNR--SS 15,000 3/8" MPI /2" O.. 8MP7-MPNR--SS 15,000 1/2" MPI /16" O.. 9MP7-MPNR--SS 15,000 9/16" MPI /4" O.. 12MP7-MPNR--SS 15,000 3/4" MPI /4" O.. 12MP7-MPNRH--SS 10,000 3/4" MPI " O.. 16MP7-MPNR--SS 12,500 1" MPI " O.. 16MP7-MPNRH--SS 10,000 1" MPI Parker Hannifin Corporation Huntsville, L US

33 Catalog 4234 Medium Pressure Valves leed Valve / Max Open 4.33 Min Close PRKER PR NO. PSI CONNECION 97-MPV-V-SS 15,000 9/16" ube Stub 9HM-MPV-V-SS 30,000 9/16" High Pressure Male 5 Materials of Construction Item # Qty escription Material 1 1 Soc Set Screw 300 Ser. SS 2 1 Handle luminum 3 1 Stem 17-4PH-H Rolling Pin 420SS 5 1 O-Ring Fluorocarbon Rubber 6 1 ody 316SS Gauge Valve YP PRKER PR NO. PSI CONNECION 9MP7-MPGV-V-SS 15,000 9/16" 9HF-MPGV-V-SS 30,000 9/16" High Pressure Female Materials of Construction Item # Qty escription Material 1 1 Soc Set Screw Steel 2 1 Handle luminum 3 1 Stem ssembly 17-4PH 4 1 Packing Gland 316SS 5 1 Locking evise 300 Ser SS x 1/4 Fill Hd Scr. 300 Ser SS 7 1 op Packing asher 416SS 8 1 Packing Fluorocarbon Rubber 9 1 ottom Packing asher 316SS 10 1 ody 316SS 33 Parker Hannifin Corporation Huntsville, L US

34 Medium Pressure Valves Catalog 4234 Introduction Parker MP series manually, pneumatically and electrically actuated 2-way and 3-way ball valves are designed for 1/4 and 1/2 turn media shutoff or switching applications up to 20,000 psi. Our trunion style ball design and spring loaded seats make the MP series ideal for severe service applications. he end connector design enables a variety of end connections and combinations for specific customer applications. wo ay all Valves.187 Orifice.375 Orifice hick lock Panel Mount Hole hick lock Panel Mount Hole H#XXXXX 9MP7-MPLPK-V-SSP 316SS H#XXXXX H#XXXXX 2.13 H#XXXXX 9MP7-MPLPKH-V-SSP 316SS H#XXXXX H#XXXXX /32 Mounting Holes /32 Mounting Holes UING PRKER PR NO. PSI CONNECION ORIFICE MINIMUM ORIFICE C v 1/8" O.. 2F-MPLPK-V-SSP 15,000 1/8" NP /4" O.. 4F-MPLPK-V-SSP 15,000 1/4" NP /4" O.. 4MP7-MPLPK-V-SSP 15,000 1/4" MPI /8" O.. 6F-MPLPK-V-SSP 15,000 3/8" NP /8" O.. 6MP7-MPLPK-V-SSP 15,000 3/8" MPI /2" O.. 8MP7-MPLPK-V-SSP 15,000 1/2" MPI /16" O.. 9MP7-MPLPK-V-SSP 15,000 9/16" MPI /2" O.. 8F-MPLPKH-V-SSP 15,000 1/2" NP /2" O.. 8MP7-MPLPKH-V-SSP 15,000 1/2" MPI /16" O.. 9MP7-MPLPKH-V-SSP 15,000 9/16" MPI /4" O.. 12MP7-MPLPKH-V-SSP 15,000 3/4" MPI " O.. 16MP7-MPLPKH-V-SSP 12,500 1" MPI /4" O.. 12 MP7-MPLPKUH-V-SSP 10,000 3/4" MPI " O.. 16MP7-MPLPKUH-V-SSP 10,000 1" MPI ay Orifice 3-ay hick lock 1.75 hick lock /32 Mounting Holes /32 Mounting Holes Parker Hannifin Corporation Huntsville, L US

35 Catalog 4234 Medium Pressure Valves hree ay all Valves hick lock H#XXXXX 9MP7-MPXPK-V-SSP 316SS H#XXXXX 4.63 Panel Mount Hole H#XXXXX hick lock H#XXXXX 9MP7-MPXPKH-V-SSP 316SS H#XXXXX 4.63 Panel Mount Hole H#XXXXX H#XXXXX /32 Mounting Holes H#XXXXX /32 Mounting Holes UING 3-Y 90 EGREES 3-Y 180 EGREES PSI CONNECION ORIFICE MINIMUM ORIFICE C v 1/8" O.. 2F-MPXPK-V-SSP 2F-MPXPK-V-SSP 15,000 1/8" NP /4" O.. 4F-MPXPK-V-SSP 4F-MPXPK-V-SSP 15,000 1/4" NP /4" O.. 4MP7-MPXPK-V-SSP 4MP7-MPXPK-V-SSP 15,000 4MP /8" O.. 6F-MPXPK-V-SSP 6F-MPXPK-V-SSP 15,000 3/8" NP /8" O.. 6MP7-MPXPK-V-SSP 6MP7-MPXPK-V-SSP 15,000 6MP /2" O.. 8MP7-MPXPK-V-SSP 8MP7-MPXPK-V-SSP 15,000 8MP /16" O.. 9MP7-MPXPK-V-SSP 9MP7-MPXPK-V-SSP 15,000 9MP /2" O.. 8F-MPXPKH-V-SSP 8F-MPXPKH-V-SSP 15,000 1/2" NP /2" O.. 8MP7-MPXPKH-V-SSP 8MP7-MPXPKH-V-SSP 15,000 8MP /16" O.. 9MP7-MPXPKH-V-SSP 9MP7-MPXPKH-V-SSP 15,000 9MP /4" O.. 12MF-MPXPKH-V-SSP 12MF-MPXPKH-V-SSP 15,000 12MF " O.. 16MF-MPXPKH-V-SSP 16MF-MPXPKH-V-SSP 15,000 16MF /4" O.. 12MP7-MPXPKUH-V-SSP 12MP7-MPXPKUH-V-SSP 10,000 3/4" MPI " O.. 16MP7-MPXPKUH-V-SSP 16MP7-MPXPKUH-V-SSP 10,000 1" MPI Locking evices dd suffix -L to the end of the part number. Example: 9MP7-MPLPKH-V-SS-L 4 1 Materials of Construction Item # escription Material 1 Handle 300 SER. SS 2 Set Screw 17-4PH-H900 3 Stop Collar, 180 egree 300 SER. SS 4 Stem 17-4PH-H900 5 Panel Nut 300 SER. SS 6 earing asher Peek/30% Glass 7 O-ring Fluorocarbon Rubber 8 ack Up Ring PFE 9 all Seat ssembly 316SS/rlon 10 elleville asher 302SS 11 Packing asher 316SS 12 ack Up asher PFE 13 ody ushing mpco runion, 180 egree 316SS 15 ottom ushing mpco ody 316SS 17 O-ring Fluorocarbon Rubber 18 O-ring Fluorocarbon Rubber 19 Seat Gland 316SS 20 ottom Gland 316SS 35 Parker Hannifin Corporation Huntsville, L US

36 Medium Pressure Valves Catalog 4234 Introduction Parker MPF series filters utilize sintered stainless steel filter discs to trap particles from 0.5 to 100 micron sizes. Inline filters help protect valuable equipment in the process line. Inline Filters Length H#XXXXX 9MP7-MPFL-40-SS 316SS H#XXXXX H#XXXXX FILER MICRON VILLE UING PRKER PR NO. PSI CONNECION ORIFICE LENGH H K /4" O.. 4MP7-MPFL-100-SS 15,000 1/4" MPI * * * * * * 3/8" O.. 6MP7-MPFL-100-SS 15,000 3/8" MPI * * * * * * 1/2" O.. 8MP7-MPFL-100-SS 15,000 1/2" MPI * * * * * * 9/16" O.. 9MP7-MPFL-100-SS 15,000 9/16" MPI * * * * * * Materials of Construction Item # escription Material 1 Cap 316SS 2 Sealing 316SS 3 ody 316SS 4 Spacer 316SS Micron Filter isc 316SS 6 O-ring PFE 36 Parker Hannifin Corporation Huntsville, L US