HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT

Transcription

1 HIGH PRESSURE TEHNOLOGY HYRULIS PNEUMTIS TESTING EQUIPMENT Ultra

2 Valve cross sections Gland with packing of copper aluminium alloy for smooth running ody Non-rotating stem of 17-4 PH prevents scoring in valve seat. djustable stem clearance Handle Slide disc of high-tensile slide material Sealing packing of back-up rings (PEEK) and seal rings (PTFE and carbon), re-adjustable Ultra ollar Factory Stems available as ON / OFF or regulating stem MXIMTOR GmbH Walkenrieder Str Zorge / Germany Telephon: / Facsimile: / info@maximator.de Internet: Gland Replaceable valve seat for abrasive media ased on decades of experience in the field of high pressure technology MXIMTOR manufactures valves and fittings for the chemical industry, water-jet cutting, power systems and test bench manufacture S 09/2007

3 State-of-the-art technical know-how based on German engineering, successful system developer and experienced specialist - MXIMTOR GmbH is a leading supplier of highpressure and testing technology, hydraulic and pneumatic equipments. Qualified and motivated company members are developing, designing, manufacturing and marketing products internationally which are worldwide employed in process technology plants. t its headquarter in Zorge and its factory in Nordhausen MXIMTOR GmbH develops, designs and manufactures high-pressure equipment. In our purposefully-built development and service centre in Nordhausen MXIMTOR offers custom-tailored services such as pressure, bursting and impulse pressure tests plus component autofrettage. modern manufacturing operation has been established at our Nordhausen factory. The plant complies, especially in the high-pressure area, with all requirements to ultra-clean production and thus ensures highest fabrication and quality standards. The MXIMTOR team is highly qualified and experienced in high-pressure technologies. Following final inspection the components are shrink wrapped which guarantee dust-free delivery to their destinations. Ultra Our work is based on a verified and certified quality management system (IN EN ISO 9001:2000) - the fundamental asset for implementing technological knowledge successfully and experience in the field of complex systems. Further sales offices of the company across Germany and partner firms around the world provide fast-tracked individual system solutions, inter alia for valves, fittings and tubings, air-driven fluid pumps, air amplifiers and gas compressors, hydraulic units, test rigs and pressure generating units as well as gas-assisted and water-assisted systems. Our efficient in-house service department carries out erection, installation and maintenance of components and systems manufactured by MXIMTOR S 09/2007 ontinuous marking ensures proper traceability of all MXI- MTOR Valves and Fittings. Following product relevant datas are marked by a sophisticated laser device. / Order ode / Maximum Working Pressure / ø Tube / Material / atch Number

4 Valves, Fittings & Tubing MXIMTOR has been designing and manufactaring high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliabilty, backed by one of the best service organizations in the industry. u complete line of medium pressure valves, fittings, tubing, check valves,line filters, anti-vibration fittings and safety head assemblies are availeble through our catalog. ll medium pressure valves and fittings use a coned and threaded, medium pressure style connection. u Whatever your high pressure needs, MXIMTOR is the source. We supply a complete line of high pressure valves, fittings, tubing, check valves, line filters, anti-vibration fittings and safety head assemblies. ll high pressure valves and fittings use the hugh pressure style connection. u Ultra In addition to our medium and high pressure lines, we are proud to offer a complete line of ultra high pressure valves, fittings and tubing. They come standart wit the 5/16 ultra high pressure coned and threaded connection. Ultra u Valve ctuators Piston type, air operated, valve actuators are also availeble from MXIMTOR. They are mounted on a standart manual valve to provide remote control cabiality. There are different air to open and air to close actuators availeble, and selection is based on the valve size, system pressure, and air pressure availeble. u all Valves MXIMTOR now offers ball valves of exceptional quality and performance with a variety of valve styles and process connections. Please consult the Valves, Fittings & Tubing catalog for availability. u and dapters Joining two different sizes and/or types of connections is easy with the couplings and adapters offered by MXIMTOR. Now a variety of size combinationsare possible! u Tools & Precise tools are necessary for manually coning and threading tubing. MXIMTOR offers these tools, allowing for the coning and threading of medium and high pressure tubing up to 9/16 O S 09/2007

5 Valves, Fittings and Tubing Table of ontents omponents Pressures Valves, Fittings, nti-vibration ollet Gland ssemblies, Tubing, oned and Threaded Nipples, heck Valves, Line Filters, Safety Head ssemblies, Rupture iscs omponents Pressures Valves, Fittings, nti-vibration ollet Gland ssemblies, Tubing, oned and Threaded Nipples, heck Valves, Line Filters, Safety Head ssemblies, Rupture iscs Ultra omponents Pressures Valves, Fittings, Tubing, oned and Threaded Nipples Valve ctuators ir to Open (normally closed), ir to lose (normally open) ctuators all Valves Pressures Ultra 2-Way all Valves- 1/4 Orifice, 3-Way all Valves- 3/16 Orifice, Pneumatic and Electric ctuators S 09/2007 dapters, Pressures dapters (male to female, male to male), (female to female) ccessories Pressure gauges, gauge connections, pressure transducer and high pressure hoses Tools & oning and Threading Tools, Reseating and eburr Tools, Tube onnection etails and Instructions, Tubing Minimum end Radius, Valve Torque Values Pressure vs. Temperature hart, TÜV ertificafe

6 Valves, Fittings and Tubing atalog Part Number Generator Pressure 15 = 15,200 psi (1,050 bar) 21 = 21,000 psi (1,500 bar) 36 = 36,000 psi (2,500 bar) 65 = 65,000 psi (4,500 bar) 101 = 101,000 psi (7,000 bar) 152 = 152,000 psi (10,500 bar) omponent = dapter (male /female) V = nti-vibration ollet Gland ssembly 24 = 2-Way all Valve = all heck Valve 33 = 3-Way iverter all Valve (90 ) F = ulkhead oupling 3S3 = 3-Way Switching all Valve (180 ) = ollar F = up Filter T = oning Tool F = ual isc Line Filter T = eburring Tool F = oupling (female / female) G = Gland onnection Stem ody Pattern onnection Size (only required on needle valves) Size 2 = 1/8 4 = 1/4 5 = 5/16 6 = 3/8 8 = 1/2 9 = 9/16 12 = 3/4 16 = 1 H = High Pressure M = Medium Pressure P = NPT Pipe U = Ultra High Pressure = SP Pipe G = Gauge SP 07 = Stem 08 = ulating Stem 87 = Stem w/ replaceable seat 88 = Replaceable Stem w/ replaceable seat 1 = Two-way straight 2 = Two-way angle 3 = Three-way, two on pressure 4 = Three-way, one on pressure 5 = Three-way, two stem manifold If different from onnection Options V = nti-vibration ollet Gland ssembly = ryogenic Packing (-100 F) = all Valve ctuator (Pneumatic ouble cting) EH = Electric all Valve ctuator ( Volts or ) EL = Electric all Valve ctuator (12-48 Volts or ) GY = Graphite raided Yarn Packing (800 F) HN = Heavy uty ir ctuators, Normally losed HNO = Heavy uty ir ctuators, Normally Open HT = High Temperature Option (1200 F) Ultra L = Elbow M = dapter (male / male) LT = Low Temperature Option (-423 F) N = Nipple O = O-Ring heck Valve P = Plug PG = Pressure Gauge R = Rupture isc RT = Reseating Tool SH = Safety Head ssembly T = Tee T = Tubing ap TU = Tubing TT = Threading Tool UF = Union oupling V = Valve X = ross LN = Light uty ir ctuators, Normally losed LNO = Light uty ir ctuators, Normally Open MN = Medium uty ir ctuators, Normally losed MNO = Medium uty ir ctuators, Normally Open S = all Valve ctuator (Pneumatic Single cting ) TG = Teflon Glass Packing (600 F) WO = Without ollars & Glands WO = Without oating 2P = Two Piece omponent S 09/2007

7 MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by one of the best service organizations in the industry. Valves feature: u Rising stem design. u 316 L (1.4404) wetted parts for excellent corrosion resistance. u Metal-to-metal seating achieves bubble-tight shut-off, longer stem and seat life, greater durability for repeated open and close cycles. u PTFE and carbon packing with metal back-up rings offers reliable stem to body sealing. u Non-rotating stem prevents stem to seat galling. u Stem sleeve and packing gland materials have been selected to achieve optimum thread cycle life and reduced handle torque. ll stem sleeve threads are rolled, assuring smooth operation. u Safety weep holes for all pressure connections and packing area. u Six different valve body patterns, with choice of vee or regulating type stem tip. MXIMTOR offers a complete line of medium pressure fittings, tubing, check valves, line filters, anti-vibration fittings and safety head assemblies. ll medium pressure valves and fittings use the medium pressure style connection. This coned and threaded connection features orifice sizes to match the high flow characteristics of the medium pressure valve, fitting and tubing line. Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. Factory MXIMTOR GmbH Walkenrieder Str. 15 Telephon: / Zorge / Germany Facsimile: / Internet info@maximator.de S 09/2007 Valves, Fittings and Tubing Pressures Medium Index links Pressure Index Valves Fittings 5-6 Fittings nti-vibration ollet Gland ssemblies nti-vibration... ollet..... Gland Tubing. ssemblies oned Tubing. and... Threaded Nipples heck Valves oned and Threaded Nipples Line Filters Safety heck Valves. Head ssemblies and Rupture iscs Line Filters Safety Head ssemblies and Rupture iscs Ultra

8 Valves Pressures Ordering Typical catalog number: 21V4MO71 21V 4M 07 1 OPTIONS Valve Series O.. Tube Size 21V 4M 1 / 4 6M 3 / 8 9M 9 / 16 12M 3 / 4 16M 1 Stem ody Pattern Extreme temperature 07 VEE stem 08 REGULTING stem (tapered tip for regulating and shutoff) 87 VEE stem with replaceable seat 88 REGULTING stem with replaceable seat 1 two-way straight 2 two-way angle 3 three-way, two on pressure 4 three-way, one on pressure 5 three-way, two-stem manifold option, see below. MXIMTOR medium pressure valves with metal to metal seats have a high level of safety and reliability under adverse operating conditions. These valves may be used both with gases and liquids. Traceability is ensured through extensively documented data (batch number, maximum pressure, material number, type designation). ll medium pressure valves include glands and collars. O.. Size Number of turns open onnection Orifice Size Flow oefficient Reference urves (v) ulating Stem Rated v* * v values shown are for 2-way straight pattern vee stem valves. For 2-way angle patterns, increase the v value by 50%. ** See page 2 in the Section for Pressure/Temperature Rating hart. Stem Pressure/Temp. Rating R.T. (bar)** 1 / 4 (6.35) 4MF ,000 (1,500) 3 / 8 (9.53) 6MF ,000 (1,500) 9/ 16 (14.29) 9MF (7.9) ,000 (1,500) 3 / 4 (19.05) 12MF (11.1) ,000 (1,500) 1 (25.4) 16MF (14.3) ,000 (1,500) Ultra Special esigns for Extreme Temperatures Standard valves are supplied with Teflon/arbon packing and may be operated to 450 F (230 ). High temperature packing and/or extended stuffing box are available for service from -423 F to 1200 F (-217 to 650 ) by adding the following suffixes to catalog order number. - TG standard valve with teflon glass packing to 600 F (315 ). - GY standard valve with graphite braided yarn packing to 800 F (425 ). - HT extended stuffing box valve with graphite braided yarn packing to 1200 F (650 ). - standard valve with cryogenic trim materials and Teflon packing to -100 F (-73 ). - LT extended stuffing box valve with teflon packing and cryogenic trim materials to -423 F (-217 ). Repair Kits onsult your MXIMTOR representative for repair kits and valve bodies. Refer to the Tools and section for proper maintenance procedures S 09/ Positive Locking evice 316 SS Valve ody available in six patterns djustable Packing oned and Threaded Tubing onnections % of rated v Valve Shown: 21V9MO71 nodized luminum Handle Low Friction Packing Gland Non-Rotating Stem ( & ulating esigns) nti-extrusion Seal Rings Metal to Metal Seating

9 I Valve Pattern atalog Number Stem O.. Tube in. Orifice in. (mm) Valves Pressures imensions E F H I J K Valve lock Panel Thickness Hole 2-Way Straight J E I 2-Way ngle G G I J E F H F H 21V4M071 21V4M081 21V6M071 21V6M081 21V9M071 21V9M081 21V12M071 21V12M081 21V16M071 21V16M081 21V4M072 21V4M082 21V6M072 21V6M082 21V9M072 21V9M082 21V12M072 21V12M082 1 / 4 3 / / (7.9) 3/ (11.1) (117) 4.61 (117) 2.01 (51) 2.01 (51) 1.62 (41.1) 1.62 (41.1) (161.3) (73.2) (60.5) 7.05 (179) 3.74 (95) 3.00 (76) 0.43 (11) (31.5) (75) (31.5) (75) 0.63 (16) 1.38 (35) (30.2) (51) (30.2) (51) (100) (44.5) (63.5) (44.7) (262) (57.2) (76) (14.3) (228) (118) (95.3) (13.5) (28.7) (63.5) (262) (71.4) (105) 1 / 4 3 / / (7.9) (127) (61.7) (30.2) (127) (61.7) (30.2) (174) (85.9) (44.5) / 4 (11.1) (192) (108) (57.2) (11) (31.5) (75) (31.5) (75) 0.63 (16) 1.38 (35) (25.4) (51) (25.4) (51) (100) (31.8) (63.5) (44.7) (262) (38) 3.00 (76) (19.1) (20.1) (19.1) (20.1) (25.4) (25.9) (31.8) (35) (41.1) (45) (19.1) (20.1) (19.1) (20.1) (25.4) (25.9) (31.8) (35) Ultra 3-Way / 2 on Pressure J E K S 09/2007 G F H 21V16M072 21V16M082 21V4M073 21V4M083 21V6M073 21V6M083 21V9M073 21V9M083 21V12M073 21V12M083 21V16M073 21V16M (14.3) (240) (130) (71.4) (13.5) (28.7) (63.5) (262) (52.5) (105) 1 / 4 3 / / (7.9) 3 / (11.1) (132) (66.5) (41.1) (132) (66.5) (41.1) (180.1) (92) (201) (117.5) (76) 2.38 (60.5) 0.43 (11) (31.5) (75) (31.5) (75) 0.63 (16) 1.38 (35) 1.62 (41.1) 1.77 (45) (25.4) (51) (30.2) (19.1) (20.1) (25.4) (51) (30.2) (19.1) (20.1) (100) (31.8) (63.5) (44.5) (25.4) (25.9) (44.7) (262) (38) 3.00 (76) (57.2) (31.8) (35) (14.3) (259) (149) (95.3) (13.5) (28.7) (63.5) (262) (52.5) (105) (71.4) (41.1) (45) G - Panel mounting screw thread size UN. ll dimensions are for reference only and are subject to change. 3

10 I I Valves Pressures Valve Pattern atalog Number Stem O.. Tube in. Orifice in. (mm) imensions E F H I J K Valve lock Panel Thickness Hole 3-Way / 1 on Pressure J E G F H 3-Way / 2-Stem Manifold J K K E G F H 21V4M074 21V4M084 21V6M074 21V6M084 21V9M074 21V9M084 21V12M074 21V12M084 21V16M074 21V16M084 21V4M075 21V4M085 21V6M075 21V6M085 21V9M075 21V9M085 21V12M075 21V12M085 1 / 4 3 / / (7.9) (127) (61.7) (30.2) (127) (61.7) (30.2) (174) (85.9) (44.5) / 4 (11.1) (192) (108) (57.2) (11) (14.3) (242) 1 / 4 3 / / (7.9) (217) (86) (217) (86) (31.5) (75) (31.5) (75) 0.63 (16) 1.38 (35) (25.4) (51) (25.4) (51) (100) (31.8) (63.5) (44.7) (262) (38) 3.00 (76) (130) (71.4) (13.5) (28.7) (63.5) (262) (52.5) (105) 1.69 (43) 1.69 (43) (306.2) (130) (65) / 4 (11.1) (332) (165) (82.5) (11) (31.5) (75) (31.5) (75) 0.63 (16) 1.38 (35) (19.1) (20.1) (19.1) (20.1) (25.4) (25.9) (31.8) (35) 1.62 (41.1) 1.77 (45) (25.4) (51) (30.2) (19.1) (20.1) (25.4) (51) (30.2) (19.1) (20.1) (100) (31.8) (63.5) (44.5) (25.4) (25.9) (44.7) (262) (38) 3.00 (76) (57.2) (31.8) (35) Ultra 21V16M075 21V16M (14.3) (411) (191) (95.5) (13.5) (28.7) (63.5) (262) (52.5) (105) (71.4) (41.1) 1.77 (45) 4 2-Way ngle / Replaceable Seat J I E G F H 21V4M872 21V4M882 21V6M872 21V6M882 21V9M872 21V9M882 21V12M872 21V12M882 21V16M872 21V16M882 1 / 4 3 / / (7.9) (123) (57.2) (30.2) (123) (57.2) (30.2) (169.6) (81.5) (44.5) / 4 (11.1) (192) (108) (57.2) (11) S 09/ (31.5) (75) (31.5) (75) 0.63 (16) 1.38 (35) (25.4) (51) (25.4) (51) (100) (31.8) (63.5) (44.7) (262) (38) 3.00 (76) (14.3) (243) (133.3) (71.4) (13.5) (28.7) (63.5) (262) (52.5) (105) (19.1) (20.1) (19.1) (20.1) (25.4) (25.9) (31.8) (35) 1.62 (41.1) G - Panel mounting screw thread size UN. ll dimensions are for reference only and are subject to change (45)

11 MXIMTOR medium pressure fittings are designed with the large orifice for use with the 21V series medium pressure valves and medium pressure tubing. ll medium pressure fittings have coned and threaded type connections. Mounting holes are standard on all elbows, tees, and crosses. Fittings Pressures Tubing Size Gland ollar Plug Tubing ap 1 / 4 (6.35) 21G4M 214M 21P4M 21T4M 3 / 8 (9.53) 21G6M 216M 21P6M 21T6M 9 / 16 (14.29) 21G9M 219M 21P9M 21T9M 3 / 4 (19.05) 21G12M 2112M 21P12M 21T12M 1 (25.4) 21G16M 2116M 21P16M 21T16M Elbow E Fitting Pattern G F atalog Number onnection O.. Tube Size in. Orifice in. (mm) 21L4M 4MF 1 / 4 21L6M 6MF 3 / L9M 9MF 9 / (9.1) onnection omponents ll medium pressure fittings are supplied with glands and collars. Refer to the adjacent chart for ordering any of the connection components individually. When using the plug, the collar is not needed (19.1) 1.00 (25.4) 1.25 (31.8) 1.10 (28) 1.38 (35) 1.75 (44.5) imensions E F G 1.54 (39.1) 2.00 (50.8) 2.50 (63.5) 0.75 (19.1) 1.00 (25.4) 1.25 (31.8) 0.49 (12.5) 0.63 (16) 0.84 (21.3) 0.49 (12.5) 0.63 (16) 0.84 (21.3) 0.26 (6.6) 0.33 (8.4) lock Thickness 0.63 (16) 0.79 (20.1) 1.02 (25.9) Ultra 21L12M 12MF 3/ (13.1) 1.50 (38.1) 2.25 (57.2) 3.00 (76) 1.50 (38.1) 1.00 (25.4) 1.00 (25.4) 0.35 (8.9) 1.38 (35) 21L16M 16MF (17.4) 2.06 (52.3) 3.00 (76) 4.13 (105) 2.06 (52.3) 1.38 (35) 1.38 (35) 0.53 (13.5) 1.77 (45) Tee F S 09/2007 G E 21T4M 4MF 1 / 4 21T6M 6MF 3 / T9M 9MF 9 / (9.1) 21T12M 12MF 3 / (13.1) 21T16M 16MF (17.4) 0.75 (19.1) 1.00 (25.4) 1.25 (31.8) 1.50 (38.1) 2.06 (52.3) 1.10 (28) 1.54 (39.1) 0.75 (19.1) (35) (50.8) (25.4) (44.5) (63.5) (31.8) (57.2) (76) (38.1) (76) (105) (52.3) 0.49 (12.5) 0.49 (12.5) (16) (16) (21.3) (21.3) (25.4) (25.4) (35) (35) 0.63 (16) (6.6) (20.1) (8.4) (25.9) (8.9) (35) (13.5) (45) ll dimensions are for reference only and are subject to change. See page 2 in the Section for pressure/temperature rating chart. 5

12 Fittings Pressures Fitting Pattern atalog Number onnection O.. Tube Size in. Orifice in. (mm) imensions E F G lock Thickness ross G F 21X4M 4MF 1 / 4 21X6M 6MF 3 / X9M 9MF 9 / (9.1) 21X12M 12MF 3 / (13.1) 21X16M 16MF 1 Straight oupling / Union oupling E 21F4M 21UF4M 21F6M 21UF6M 21F9M 21UF9M (17.4) 4MF 1 / 4 6MF 3 / MF 9 / (9.1) 0.77 (19.5) 1.00 (25.4) 1.25 (31.8) 1.50 (38.1) 2.06 (52.3) 1.62 (41.1) 1.75 (44.5) 2.12 (53.8) 1.54 (39.1) 2.00 (50.8) 2.50 (63.5) 3.00 (76) 4.13 (105) 0.69 (17.5) 0.88 (22.3) 1.06 (27) 1.54 (39.1) 2.00 (50.8) 2.50 (63.5) 3.00 (76) 4.13 (105) 0.77 (19.5) 1.00 (25.4) 1.25 (31.8) 1.50 (38.1) 2.06 (52.3) 0.49 (12.5) 0.98 (25) (16) (32) (21.3) (42.6) (25.4) (50.8) (35) (70) Straight oupling Union oupling Straight oupling Union oupling Straight oupling Union oupling 0.26 (6.6) 0.33 (8.4) 0.35 (8.9) 0.53 (13.5) 0.63 (16) 0.79 (20.1) 1.02 (25.9) 1.38 (35) 1.77 (45) Ultra 21F12M 21UF12M 12MF 3 / (13.1) 2.50 (63.5) 1.44 (36.5) Straight oupling Union oupling 6 ulkhead oupling 21F16M 21UF16M 16MF (17.4) 21F4M 4MF 1 / 4 21F6M 6MF 3 / F9M 9MF 9 / (9.1) 21F12M 12MF 3 / (13.1) 21F16M 16MF 1 ll dimensions are for reference only and are subject to change. See page 2 in the Section for pressure/temperature rating chart (17.4) S 09/ (88.9) 1.88 (47.8) 2.01 (51) 2.38 (60.5) 2.81 (71.4) 3.54 (89.9) 2.00 (50.8) 1.06 (27) 1.06 (27) 1.44 (36.5) 1.62 (41.3) 2.00 (50.8) 1.06 (27) 1.06 (27) 1.44 (36.5) 1.62 (41.3) 2.00 (50.8) 0.81 (20.6) 0.94 (23.9) 1.12 (28.5) 1.37 (34.8) 1.68 (42.6) Straight oupling Union oupling 0.67 (17) 0.39 (9.9) 0.39 (9.9) 0.47 (11.9) 0.51 (13)

13 MXIMTOR anti-vibration collet gland assemblies are for use in applications where there could be extreme external mechanical vibrations or shock in tubing lines. These collet gland assemblies are interchangeable with the standard medium pressure coned and threaded tube connections. In a normal coned and threaded tube connection, any external mechanical loading on the tubing lines, valves or fittings would be concentrated on the first thread of the tube. This can cause failure of the tube at this thinner cross-section. The anti-vibration collet gland assembly grips the tube behind the connection, supporting the tube at the full cross-section and straight area, moving the loading away from the threaded area. The back part of the assembly has a gland nut that, when tightened properly, compresses a split collet on the tube, providing the beneficial gripping action. ll anti-vibration collet gland assemblies come with a Molybdenum isulfide oating to guard against galling of the stainless components S 09/2007 Gland Pattern atalog Number Part 21V4M 21V4M 21V4M 21VG4M 21V6M 21V6M 21V6M 21VG6M 21V9M 21V9M 21V9M 21VG9M 21V12M 21V12M 21V12M 21VG12M 21V16M 21V16M 21V16M 21VG16M nti-vibration ollet Gland ssembly Pressures omplete ssembly ollet ody Slotted ollet Gland Nut omplete ssembly ollet ody Slotted ollet Gland Nut omplete ssembly ollet ody Slotted ollet Gland Nut omplete ssembly ollet ody Slotted ollet Gland Nut omplete ssembly ollet ody Slotted ollet Gland Nut O.. Tubing Size in. 1/4 3/8 9/16 3/4 1 imensions (Hex.) (Hex.) 1.27 (32.2) 1.54 (39.1) 1.82 (46.2) 2.01 (51) 2.44 (62) 0.50 (12,7) 0.62 (15.7) 0.94 (23.9) 1.19 (30.2) 1.38 (35) 0.62 (15.7) 0.81 (20.6) 0.94 (23.9) 1.25 (31.8) 1.50 (38.1) ll dimensions are for reference only and subject to change. 7 Ultra

14 Tubing Pressures MXIMTOR offers a line of cold drawn thick wall tubing, with flow areas to compliment the large orifice medium pressure valves and fittings. This tubing is made under strict manufacturing and quality control standards and inspections, with dimensional tolerances to match the requirements of the medium pressure coned and threaded connections. The standard materials are 304 and 316 stainless steels. Other materials may be provided on special request, depending on the specific material, diameters and lengths. Normal Tubing Size atalog Number Tubing Tolerances Tube Material Fits onnection Tolerance O.. 1/ 4 (6.35) / (6.299 / 6.172) 3 / 8 (9.53) 0 / (9.398 / 9.271) 9 / 16 (14.29) / ( / ) 3/ 4 (19.05) / ( / ) 1 (25.4) / ( / ) Tube Size O.. I to 100 F (-198 to 37 ) 200 F (93 ) Working Pressure psi (bar) 400 F (204 ) 600 F (315 ) 800 F (426 ) Ultra 21TU4M TU4M SS 304SS 4MF 1 / (2.77) 21,000 (1,500) 18,900 (1,300) 17,430 (1,200) 15,960 (1,100) 15,120 (1,040) 8 21TU6M TU6M TU9M TU9M TU9M TU9M TU12M TU12M TU16M TU16M SS 304SS 316SS 304SS 316SS 304SS 316SS 316SS 316SS 316SS ll dimensions are for reference only and subject to change. 6MF 3 / (5.17) 9MF 9/ (7.93) 9MF 9 / (9.12) 12MF 3 / 4 16MF (11.13) (13.11) (14.27) (17.48) 21,000 (1,500) 21,000 (1,500) 15,200 (1,050) 21,000 (1,500) 15,200 (1,050) 21,000 (1,500) 15,200 (1,050) S 09/ ,900 (1,300) 18,900 (1,300) 13,680 (940) 18,900 (1,300) 13,680 (940) 18,900 (1,300) 13,680 (940) 17,430 (1,200) 17,430 (1,200) 12,616 (870) 17,430 (1,200) 12,616 (870) 17,430 (1,200) 12,616 (870) 15,960 (1,100) 15,960 (1,100) 11,552 (790) 15,960 (1,100) 11,552 (790) 15,960 (1,100) 11,552 (790) 15,120 (1,040) 15,120 (1,040) 10,944 (750) 15,120 (1,040) 10,944 (750) 15,120 (1,040) 10,944 (750)

15 oned and Threaded Nipples Pressures 2.75 (69.85) Length 3 (76.2) Length atalog Numbers are 316 Stainless Steel material 4 (101.6) Length 6 (152.4) Length MXIMTOR offers a line of coned and threaded medium pressure tube nipples in a variety of lengths for all standard tube sizes. The coned and threaded medium pressure tube nipples are available in 316 stainless steel. They are also available in the 15,200 psi (1,050 bar) or 21,000 psi (1,500 bar) versions for the 9/16, 3/4 and 1 O tube sizes. See chart below for ordering information. Special length coned and threaded nipples are available upon request. onsult MXIMTOR for availability and price. 8 (203.2) Length 10 (254) Length 12 (304.8) Length Fits onnection Tube Size N4M N4M N4M N4M N4M N4M N4M MF 1 / 4 (2.77) N6M N6M N6M N6M N6M N6M MF 3 / 8 (5.17) N9M N9M N9M N9M N9M MF 9 / 16 (7.93) O.. I.. Working Pressure at 100 F psi (bar) 21,000 (1,500) 21,000 (1,500) 21,000 (1,500) Ultra N9M N9M N9M N9M N9M MF 9 / 16 (9.12) 15,200 (1,050) Standard nipples are not supplied with glands and collars, see Fittings on page 4 for these components. See adjacent Tubing page 6, for pressure/temperature rating chart. ll dimensions are for reference only and subject to change S 09/ N12M N12M N12M N12M MF 3 / 4 (11.13) N12M N12M N12M N12M MF 3 / 4 (13.11) 21N16M N16M N16M N16M MF 1 15N16M N16M N16M N16M MF (14.27) (17.48) 21,000 (1,500) 15,200 (1,050) 21,000 (1,500) 15,200 (1,050) 9

16 heck Valves Pressures O-Ring heck Valves O-Ring heck Valves Valve Pattern O-Ring heck Valves atalog Number 21O4M 21O6M 21O9M MXIMTOR o-ring check valves provide high quality directional flow control and tight shutoff for liquids and gases. ll check valves are supplied with glands and collars. These check valves are not to be used as a relief device. Materials. ody, cover, poppet, cover gland: 316 series stainless steel Spring: 300 series stainless steel O-ring: Viton [4 F to 392 F (-20 to 200 )] onnection 4MF 6MF 9MF Pressure Rating psi (bar) 21,000 (1,500) 21,000 (1,500) 21,000 (1,500) Orifice (9.1) Rated (v) imensions (Hex.) 0.88 (22.3) 1.06 (27) 1.44 (36.5) 2.91 (73.9) 3.31 (84.1) 4.21 (106.9) Ultra 21O12M 12MF 21,000 (1,500) (13.1) (50.8) 5.43 (137.9) 21O16M 16MF 21,000 (1,500) (17.4) (50.8) 6.57 (166.9) UTION: FREQUENT INSPETIONS of O-Rings are necessary to ensure proper service of the check valve. O-Rings have shown satisfactory service life in testing, however different service conditions may lead to variations in cycle and shelf life. ll dimensions are for reference only and subject to change S 09/2007

17 all heck Valves heck Valves Pressures all heck Valves Valve Pattern all heck Valves atalog Number 214M 216M 219M 2112M MXIMTOR ball check valves prevent reverse flow where bubble tight shutoff is not mandatory. These check valves are designed with a ball cradled floating poppet to assure positive inline seating. This poppet design allows full flow around the ball to minimize pressure drop. heck valves are rated to 660 F (350 ). ll check valves are supplied with glands and collars. These check valves are not to be used as a relief device. Materials. ody, cover, poppet, cover gland: 316L series stainless steel all and spring: 300 series stainless steel onnection 4MF 6MF 9MF 12MF Pressure Rating psi (bar) 21,000 (1,500) 21,000 (1,500) 21,000 (1,500) 21,000 (1,500) Orifice (9.1) (13.1) Rated (v) imensions (Hex.) 0.88 (22.3) 1.06 (27) 1.44 (36.5) 2.00 (50.8) 2.91 (73.9) 3.31 (84.1) 4.21 (106.9) 5.43 (137.9) Ultra 2116M 16MF 21,000 (1,500) (17.4) (50.8) 6.57 (166.9) S 09/2007 UTION: FREQUENT INSPETIONS of O-Rings are necessary to ensure proper service of the check valve. O-Rings have shown satisfactory service life in testing, however different service conditions may lead to variations in cycle and shelf life. ll dimensions are for reference only and subject to change. 11

18 Line Filters Pressures ual-isc Line Filters ual-isc Line Filters MXIMTOR dual-disc line filters are used to filter process fluids in high pressure systems. This design helps remove the large particles first through a coarse primary disc, which then allows a secondary disc to provide a smaller micron filtration. These filter elements are designed to withstand pressure surges without cracking, flaking, or rupturing. Filter elements come standard in the following micron sizes: 5/8, 8/30, 30/56 (secondary/primary). Filters are rated for temperatures -60 F to 660 F (-50 to 350 ). ll line filters come with glands and collars. Materials ody: cover, cover gland: 316L series stainless steel Element: 316 stainless steel up- Line Filters MXIMTOR cup-type line filters are used when maximum filtration surface area and a single micron size element is preferred. This design increases the filter area as much as 6 times the area of the disc type filter, and will permit higher flow rates with a lower pressure drop, and longer intervals between element changes. Filter elements come standard in 5, 30, or 56 micron sizes and are easily replaced. Filters are rated for temperatures -60 F to 660 F (-50 to 350 ). ll line filters come with glands and collars. Materials: ody, cover, cover gland: 316L series stainless steel Element: 316 stainless steel up- Line Filters Ultra atalog Number Pressure Rating psi (bar) Orifice Micron Size onnection Filter Element rea in. 2 (mm) 2 imensions (Hex.) 12 ual-isc Line Filters 21F9M - 5/8 5/8 21, F9M - 8/30 8/30 (1,500) (7.9) 21F9M - 30/56 30/56 up- Line Filters 21F4M ,000 21F4M (1,500) 21F4M F6M , F6M (1,500) 21F6M F9M , F9M (1,500) (9.1) 21F9M F12M , F12M (1,050) (13.1) 21F12M F16M , F16M (1,500) (17.4) 21F16M It is recommended that all fluids entering a high pressure system be thoroughly cleaned. Maximator filters are designed to remove small amounts of process particles. Pressure differential should not exceed 1000 psi across the filter elements S 09/2007 9MF 4MF 6MF 9MF 12MF 16MF 0.25 (160) 0.82 (530) 0.82 (530) 1.55 (1,000) 6.14 (3,960) 6.14 (3,960) 2.68 (68.1) 2.38 (60.5) 2.83 (71.8) 3.63 (92.2) 5.75 (146) 5.75 (146) 4.96 (126) 2.87 (72.9) 3.35 (85.1) 4.33 (110) 6.57 (166.9) 6.57 (166.9) 1.44 (36.5) 0.88 (22.3) 1.06 (27) 1.44 (36.5) 2.00 (50.8) 2.00 (50.8) ll dimensions for reference only and are subject to change.

19 MXIMTOR safety head assemblies are used to provide over-pressure protection to high pressure systems. These safety head assemblies are to be used with the appropriate 1 / 4 angular rupture disc listed in the chart below. Safety Head ssembly Pressures Safety Head ssembly Safety Head ssembly atalog Number without isc 21SH4M 21SH6M 21SH9M 21SH12M Fits onnection 4MF 6MF 9MF 12MF Pressure Rating psi (bar) 21,000 (1,500) 21,000 (1,500) 21,000 (1,500) 21,000 (1,500) ody Torque ft - lbs. (Nm) 20 (30) 30 (40) 55 (75) 90 (120) (Hex.) 1.06 (27) 1.06 (27) 1.06 (27) 1.19 (30.2) (Hex.) 0.88 (22.3) 0.88 (22.3) 0.88 (22.3) 0.88 (22.3) imensions (LG.) 2.48 (63) 2.72 (69.1) 2.51 (63.7) 2.72 (69.1) (I..) (2.8) (5.1) (7.9) (7.9) E (I..) (6.3) (6.3) (6.3) (6.3) Ultra 21SH16M 16MF 21,000 (1,500) 150 (200) 1.44 (36.6) 0.88 (22.3) 2.72 (69.1) (7.9) (6.3) S 09/2007 ll dimensions for reference only and are subject to change. 13

20 1/4" ngular Rupture iscs atalog Number R-1000 R-1200 R-1500 R-1750 R-2000 R-2500 R-3000 R-3500 R-4000 R-4500 R-5000 Pressure range psi (bar) 970-1,060 ( ) 1,164-1,272 ( ) 1,455-1,590 ( ) 1,697-1,855 ( ) 1,940-2,120 ( ) 2,425-2,650 ( ) 2,910-3,180 ( ) 3,395-3,710 ( ) 3,880-4,240 ( ) 4,365-4,770 ( ) 4,850-5,300 ( ) 1/ 4 " angular seat rupture discs are designed to be used with the safety head assemblies that are show above. Minimum rupture disc pressure ratings should be at least 110% of system operating pressure. The standard material is Inconel. The pressure ranges indicated in the table below are at room temperature (72 F). Other materials and pressure ranges are available upon request. atalog Number R-5500 R-6000 R-6500 R-7000 R-7500 R-8000 R-8500 R-9000 R-9500 R R Pressure range psi (bar) 5,335-5,830 ( ) 5,820-6,360 ( ) 6,305-6,890 ( ) 6,790-7,420 ( ) 7,275-7,950 ( ) 7,760-8,480 ( ) 8,245-9,010 ( ) 8,730-9,540 ( ) 9,215-10,070 ( ) 9,700-10,600 ( ) 10,670-11,660 ( ) atalog Number R R R R R R R R R R R Pressure range psi (bar) 11,640-12,720 ( ) 12,610-13,780 ( ) 13,580-14,840 ( ) 14,550-15,900 (1, ,096.6) 15,520-16,960 (1, ,169.7) 16,490-18,020 (1, ,242.8) 17,460-19,080 (1, ,315.9) 18,430-20,140 (1,271-1,389) 19,400-21,200 (1, ,462.1) 20,370-22,260 (1, ,535.2) 21,340-23,320 (1, ,608.3) Ultra 14 Rupture iscs are individually packed and marked type plate S 09/2007

21 MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by one of the best service organizations in the industry. Valves feature: u Rising stem design. u 316 L (1.4404) wetted parts for excellent corrosion resistance. u Metal-to-metal seating achieves bubble-tight shut-off, longer stem and seat life, greater durability for repeated open and close cycles. u PTFE and carbon packing with metal back-up rings offers reliable stem to body sealing. u Non-rotating stem prevents stem to seat galling. u Stem sleeve and packing gland materials have been selected to achieve optimum thread cycle life and reduced handle torque. ll stem sleeve threads are rolled, assuring smooth operation. u Safety weep holes for all pressure connections and packing area. u Six different valve body patterns, with choice of vee or regulating type stem tip. MXIMTOR offers a complete line of high pressure fittings, tubing, check valves, line filters, anti-vibration fittings and safety head assemblies. ll high pressure valves and fittings use the high pressure style connection. Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. Factory MXIMTOR GmbH Walkenrieder Str. 15 Telephon: / Zorge / Germany Facsimile: / Internet info@maximator.de S 09/2007 Valves, Fittings and Tubing Pressures High Index Pressure links to: Index Valves rated to 36,000 psi (2,500 bar)..2-3 Valves rated. 4-5 Valves rated. 4-5 Fittings nti-vibration Fittings..... ollet..... Gland ssemblies nti-vibration ollet Gland Tubing ssemblies oned and Threaded Nipples Tubing heck Valves 11 Line oned Filters. and Threaded Nipples Safety Head ssemblies and heck Rupture Valves iscs Line Filters Safety Head ssemblies and Rupture iscs Ultra

22 Valves Pressures to 36,000 psi (2,500 bar) Ordering Typical catalog number: 36V4H071 36V 4H 07 1 OPTIONS MXIMTOR high pressure valves with metal to metal seats have a high level of safety and reliability under adverse operating conditions. These valves may be used both with gases and liquids. Traceability is ensured through extensively documented data (batch number, max. pressure, material number, type designation). ll high pressure valves include glands and collars. O.. Size onnection Orifice Size Rated v* Pressure/Temp. Rating R.T.** (bar) 1/ 4 (6.35) 4HF (2.3) ,000 (2,500) 3/ 8 (9.53) 6HF ,000 (2,500) 9/ 16 (19.05) 9HF ,000 (2,500) * v values shown are for 2-way straight pattern vee stem valves. For 2-way angle patterns, increase the v value by 50%. ** See page 2 in the Section for Pressure/Temperature Rating hart. ccessories Valve Series 2 O.. Tube Size 36V 4H 1 / 4 6H 3 / 8 9H 9 / VEE stem 08 regulating stem (tapered tip for regulating and shutoff) 87 VEE stem with replaceable seat 88 regulating stem with replaceable seat 1 two-way straight 2 two-way angle 3 three-way, two on pressure 4 three-way, one on pressure 5 three-way, two-stem manifold Stem ody Pattern Extreme temperature option, see below. Special esigns for Extreme Temperatures Standard valves are supplied with Teflon/arbon packing and may be operated to 450 F (230 ). High temperature packing and/or extended stuffing box are available for service from F to 1200 F (-217 to 650 ) by adding the following suffixes to catalog order number. - TG standard valve with teflon glass packing to 600 F (315 ). - GY standard valve with graphite braided yarn packing to 800 F (425 ). - HT extended stuffing box valve with graphite braided yarn packing to 1200 F (650 ). - standard valve with cryogenic trim materials and teflon packing to -100 F (-73 ). - LT entended stuffing box valve with teflon packing and cryogenic trim materials to -423 F (-217 ). Repair Kits onsult your MXIMTOR representative for repair kits and valve bodies. Refer to the Tools and section for proper maintenance procedures. Number of turns open S 09/ djustable Packing Low Friction Packing Gland oned and Threaded Tubing onnections Flow oefficient Reference urves (v) ulating Stem SS Valve ody available in six patterns % of rated v Valve Shown: 36V9HO71 Stem nodized luminum Handle Positive Locking evice 316SS Non- Rotating Stem ( & ulating esigns) nti-extrusion Seal Rings Metal to Metal Seating Ultra Valve ctuators all Valves Tools and

23 I Valve Pattern atalog Number Stem O.. Tube in. Orifice in. (mm) Valves Pressures to 36,000 psi (2,500 bar) imensions E F H I J K Valve Panel Hole lock Thickness 2-Way Straight 2-Way ngle J J 3-Way / 2 on Pressure J I 3-Way / 1 on Pressure J 3-Way / 2-Stem Manifold S 09/2007 I E G E K G G F H I J E G E F H I I F H F H 36V4H071 36V4H081 36V6H071 36V6H081 36V9H071 36V9H081 36V4H072 36V4H082 36V6H072 36V6H082 36V9H072 36V9H082 36V4H073 36V4H083 36V6H073 36V6H083 36V9H073 36V9H083 36V4H074 36V4H084 36V6H074 36V6H084 36V9H074 36V9H084 36V4H075 36V4H085 36V6H075 36V6H085 36V9H075 36V9H085 2-Way ngle / Replaceable Seat J E K K G G E F H F H 36V4H872 36V4H882 36V6H872 36V6H882 36V9H872 36V9H882 1 / (2.3) 3 / 8 9 / 16 1 / (2.3) 3 / 8 9 / 16 1 / (2.3) 3 / 8 9 / 16 1 / (2.3) 3 / 8 9 / 16 1 / (2.3) 3 / 8 9 / 16 1 / (2.3) 3 / 8 9 / (126) 4.96 (126) 2.01 (51) 2.01 (51) (127) (62) 4.96 (126) 2.01 (51) (121.5) (56) (127) (62) 1.50 (38) 1.50 (38) 1.56 (39.6) 1.12 (28.5) 1.10 (28) 1.12 (28.5) (119.1) (54.1) (38) (129) (63.5) (38) (138.5) (72.9) (39.6) 4.96 (126) 4.76 (121) 2.01 (51) 2.20 (56) (127) (62) (209) (78) 1.12 (28.5) 1.12 (28.5) 1.12 (28.5) 1.54 (39.1) (213) (82.5) (40.9) (226) (95) 1.88 (47.8) (126) (60.5) (28.5) (126) (60.5) (28.5) (127) (62) 1.18 (30) (35) (75) (28.5) (51) (25.4) (25.9) (35) (75) (28.5) (51) (25.4) (25.9) (35) (75) (28.5) (57) (25.4) (39.1) (35) (75) (25.4) (51) (25.4) (25.9) (35) (75) (25.4) (51) (25.4) (25.9) (35) (75) (33.5) (57) (25.4) (39.1) (35) (75) (25.4) (51) (28.5) (25.4) (25.9) (35) (75) (25.4) (51) (28.5) (25.4) (25.9) (35) (75) (33.5) (57) (28.5) (25.4) (39.1) (35) (75) (25.4) (51) (25.4) (25.9) (35) (75) (25.4) (51) (25.4) (25.9) (35) (75) (33.5) (57) (25.4) (39.1) (35) (75) (25.4) (51) (28.5) (25.4) (25.9) (35) (75) (25.4) (51) (28.5) (25.4) (25.9) (35) (75) (33.5) (57) (28.5) (25.4) (39.1) (35) (75) (25.4) (51) (25.4) (25.9) (35) (75) (25.4) (51) (25.4) (25.9) (35) (75) (33.5) (57) (25.4) (39.1) G - Panel mounting screw thread size UN. ll dimensions are for reference only and subject to change. 3 Ultra

24 Valves Pressures Ordering Typical catalog number: 65V4H V 4H 07 1 OPTIONS Valve Series O.. Tube Size Stem ody Pattern Extreme temperature option, see below. 65V 4H 1 / 4 07 VEE stem 6H 3 / 8 08 regulating stem 9H 9 (tapered tip for / 16 regulating and shutoff) 87 VEE stem with replaceable seat 88 regulating stem with replaceable seat 1 two-way straight 2 two-way angle 3 three-way, two on pressure 4 three-way, one on pressure 5 three-way, two-stem manifold Special esigns for Extreme Temperatures Standard valves are supplied with Teflon/arbon packing and may be operated to 450 F (230 ). High temperature packing and/or extended stuffing box are available for service from -423 F to 1200 F (-217 to 650 ) by adding the following suffixes to catalog order number. - TG standard valve with teflon glass packing to 600 F (315 ). - GY standard valve with graphite braided yarn packing to 800 F (425 ). - HT extended stuffing box valve with graphite braided yarn packing to 1200 F (650 ). - standard valve with cryogenic trim materials and teflon packing to -100 F (-73 ). - LT entended stuffing box valve with teflon packing and cryogenic trim materials to -423 F (-217 ). Repair Kits onsult your MXIMTOR representative for repair kits and valve bodies. Refer to the Tools and section for proper maintenance procedures. Number of turns open S 09/2007 MXIMTOR high pressure valves with metal to metal seats have a high level of safety and reliability under adverse operating conditions. These valves may be used both with gases and liquids. Traceability is ensured through extensively documented data (batch number, maximum pressure, material number, type designation). ll high pressure valves include glands and collars. O.. Size onnection Orifice Size ulating Stem % of rated v Rated v* Pressure/Temp. Rating psi R.T.** 1/ 4 (6.35) 4HF (1.6) ,000 (4,500) 3/ 8 (9.53) 6HF (1.6) ,000 (4,500) 9/ 16 (19.05) 9HF (2) ,000 (4,500) * v values shown are for 2-way straight pattern vee stem valves. For 2-way angle patterns, increase the v value by 50%. ** See page 2 in the Section for Pressure/Temperature Rating hart. Low Friction Packing Gland 316 SS Valve ody available in six patterns djustable Packing oned and Threaded Tubing onnections Flow oefficient Reference urves (v) Valve Shown: 65V9HO71 Stem nodized luminum Handle Positive Locking evice 17-4 PH Non- Rotating Stem ( & ulating esigns) nti-extrusion Seal Rings Metal to Metal Seating Ultra Valve ctuators all Valves ccessories Tools and

25 I Valve Pattern atalog Number Stem O.. Tube in. Orifice in. (mm) Valves Pressures imensions E F H I J K Valve Panel Hole lock Thickness 2-Way Straight J 2-Way ngle J E I E 3-Way / 2 on Pressure J I 3-Way / 1 on Pressure G E K G G F I I I H F H F H 65V4H071 65V4H081 65V6H071 65V6H081 65V9H071 65V9H081 65V4H072 65V4H082 65V6H072 65V6H082 65V9H072 65V9H082 65V4H073 65V4H083 65V6H073 65V6H083 65V9H073 65V9H083 1 / (1.6) 3 / (1.6) 9 / (2) 1 / (1.6) 3 / (1.6) 9 / (2) 1 / (1.6) 3 / (1.6) 9 / (2) (118.6) (54.1) (43) (122) (56.9) (43) (128) (63.5) (44.5) (126) (60.5) (34) (131) (66.5) (33.5) (136) (71.1) (33.5) (126) (60.5) (43) (134.9) (70.1) (43) 5.71 (145) 3.15 (80) 1.75 (44.5) 1.38 (35) 1.38 (35) 1.38 (35) 1.38 (35) 1.38 (35) 1.38 (35) 1.38 (35) 1.38 (35) 1.38 (35) 2.95 (75) 2.95 (75) 2.95 (75) 2.95 (75) 2.95 (75) 2.95 (75) 2.95 (75) 2.95 (75) 2.95 (75) 1.32 (33.5) 1.32 (33.5) 1.30 (33) 1.00 (25.4) 1.00 (25.4) 1.32 (33.5) 1.00 (25.4) 1.00 (25.4) 1.32 (33.5) 2.01 (51) 2.01 (51) 2.64 (57) 2.01 (51) 2.01 (51) 2.64 (57) 2.01 (51) 2.01 (51) 2.64 (57) (25.4) (25.9) (25.4) (25.9) (25.4) (39.1) (25.4) (25.9) (25.4) (25.9) (25.4) (39.1) (33.5) (25.4) (25.9) (33.5) (25.4) (25.9) (33) (25.4) (39.1) Ultra 65V4H074 65V4H084 1 / (1.6) (126) (60.5) (33.5) 1.38 (35) 2.95 (75) 1.00 (25.4) 2.01 (51) (25.4) (25.9) J F H 65V6H074 65V6H084 3 / (1.6) (131) (66.5) (33.5) 1.38 (35) 2.95 (75) 1.00 (25.4) 2.01 (51) (25.4) (25.9) 3-Way / 2-Stem Manifold J K S 09/2007 GE G F H 65V9H074 65V9H084 65V4H075 65V4H085 65V6H075 65V6H085 65V9H075 65V9H085 2-Way ngle / Replaceable Seat J E K E G F H 65V4H872 65V4H882 65V6H872 65V6H882 65V9H872 65V9H882 9 / (2) 1 / (1.6) 3 / (1.6) 9 / (2) 1 / (1.6) 3 / (1.6) 9 / (2) (136) (71.1) (33.5) (217.4) (87.4) (43.7) (217.4) (95.5) (48) 9.25 (235) (105) (52.6) (131) (66.5) (33.5) (131) (66.5) (33.5) (131) (66.5) (33.5) (35) (75) (33.5) (57) (25.4) (39.1) (35) (75) (25.4) (51) (33.5) (25.4) (25.9) (35) (75) (25.4) (51) (33.5) (25.4) (25.9) (35) (75) (33.5) (57) (33) (25.4) (39.1) (35) (75) (25.4) (51) (25.4) (25.9) (35) (75) (25.4) (51) (25.4) (25.9) (35) (75) (33.5) (57) (25.4) (39.1) G - Panel Mounting Screw Thread Size UN. ll dimensions are for reference only and subject to change. 5

26 Fittings Pressures MXIMTOR high pressure fittings are designed to be used with the 36V and 65V series high pressure valves and high pressure tubing. ll high pressure fittings have coned and threaded type connections. Mounting holes are standard on all elbows, tees, and crosses. Tubing Size Gland ollar Plug Tubing ap 1 / 4 65G4H 654H 65P4H 65T4H 3 / 8 65G6H 656H 65P6H 65T6H 9 / 16 65G9H 659H 65P9H 65T9H onnection omponents ll high pressure fittings are supplied with glands and collars. Refer to the adjacent chart for ordering any of the connection components individually. When using the plug, the collar is not needed. ccessories Elbow E Fitting Pattern G F atalog Number onnection O.. Tube Size in. Orifice in. (mm) 65L4H 4HF 1 / (2.3) 65L6H 6HF 3 / 8 imensions E F G 0.89 (22.6) 1.02 (25.9) 1.54 (39.1) 0.63 (16) 0.46 (11.7) (32) (38.1) (51) (24.9) (18.3) 0.65 (16.5) (17.5) (6.6) lock Thickness 1.02 (25.9) 1.02 (25.9) Ultra Tools and 65L9H 9HF 9 / (4.8) 1.89 (48) 1.89 (48) 2.64 (67) 1.10 (28) 0.83 (21.1) 0.94 (23.9) 0.33 (8.4) 1.54 (39.1) Tee F G E 65T4H 4HF 1 / (2.3) 65T6H 6HF 3 / (25.4) 1.00 (25.4) 1.26 (32) 1.57 (39.9) 2.01 (51) 2.01 (51) 0.89 (22.6) 1.06 (26.9) 0.46 (11.7) 0.72 (18.3) 1.30 (33) 1.38 (35) 0.26 (6.6) 1.02 (25.9) 1.02 (25.9) Valve ctuators 65T9H 9HF 9 / (4.8) 1.32 (33.5) 2.13 (54.1) 2.64 (67) 1.38 (35) 0.83 (21.1) 1.89 (48) 0.33 (8.4) 1.54 (39.1) See page 2 in the Section for pressure/temperature rating chart. ll dimensions are for reference only and are subject to change S 09/2007 all Valves

27 Fitting Pattern atalog Number onnection O.. Tube Size in. Orifice in. (mm) Fittings Pressures imensions E F G lock Thickness ross G F Straight oupling / Union oupling E ulkhead oupling 65X4H 4HF 1 / (2.3) 65X6H 6HF 3 / 8 65X9H 9HF 9 / (4.8) 65F4H 65UF4H 65F6H 65UF6H 65F9H 65UF9H 4HF 1 / (2.3) 6HF 3 / 8 9HF 9 / (4.8) 65F4H 4HF 1 / (2.3) 65F6H 6HF 3 / (25.4) 1.00 (25.4) 1.32 (33.5) 1.38 (35) 1.77 (45) 2.19 (55.6) 1.89 (48) 2.38 (60.5) 1.26 (32) 2.13 (54.1) 2.76 (70.1) 1.06 (27) 1.06 (27) 1.44 (36.6) 1.06 (27) 1.44 (36.6) 2.01 (51.1) 2.01 (51.1) 2.64 (67) 1.06 (27) 1.44 (36.6) 0.63 (16) 1.06 (27) 1.38 (35) 0.94 (23.9) 1.12 (28.5) 0.46 (11.7) 1.30 (33) (18.3) (35) (21.1) (48) Straight oupling Union oupling Straight oupling Union oupling Straight oupling Union oupling 0.16 (4) 0.35 (8.9) 0.26 (6.6) 0.33 (8.4) 1.02 (25.9) 1.02 (25.9) 1.54 (39.1) Ultra 65F9H 9HF 9 / (4.8) 2.76 (70.1) 1.63 (41.3) 1.63 (41.3) 1.43 (36.3) 0.67 (17) S 09/2007 See page 2 in the Section for pressure/temperature rating chart. ll dimensions are for reference only and are subject to change. 7

28 nti-vibration ollet Gland ssembly Pressures MXIMTOR anti-vibration collet gland assemblies are for use in applications where there could be extreme external mechanical vibrations or shock in tubing lines. These collet gland assemblies are interchangeable with the standard high pressure coned and threaded tube connections. In a normal coned and threaded tube connection, any external mechanical loading on the tubing lines, valves or fittings, would be concentrated on the first thread of the tube. This can cause failure of the tube at this thinner cross-section. The anti-vibration collet gland assembly grips the tube behind the connection, supporting the tube at the full cross-section and straight area, moving the loading away from the threaded area. ccessories The anti-vibration collet gland assembly, when tightened properly, compresses a split collet on the tube, providing the beneficial gripping action. ll anti-vibration collet gland assemblies come with a Molybdenum isulfide oating to guard against galling of the stainless components. Gland Pattern atalog Number Part 65V4H omplete ssembly O.. Tubing Size in. imensions (Hex.) Ultra Tools and 65VF4H 65V4H Flat ollar Slotted ollet 1/ (21.1) 0.62 (15.7) 65VG4H Gland Nut 65V6H 65VF6H 65V6H 65VG6H 65V9H omplete ssembly Flat ollar Slotted ollet Gland Nut omplete ssembly 3 / (29.5) 0.81 (20.6) Valve ctuators 65VF9H 65V9H Flat ollar Slotted ollet 9 / (38) 1.19 (30.2) 65VG9H Gland Nut ll dimensions are for reference only and are subject to change S 09/2007 all Valves

29 Tubing Pressures MXIMTOR offers a line of cold drawn thick wall tubing, with flow areas to compliment the high pressure valves and fittings. This tubing is made under strict manufacturing and quality control standards and inspections, with dimensional tolerances to match the requirements of the high pressure coned and threaded connections. The standard materials are 304 and 316 stainless steels. Other materials may be provided on special request, depending on the specific material, diameters and lengths. Normal Tubing Size atalog Number 65TU4H TU4H-304 Tubing Tolerances Tube Material 316SS 304SS Fits onnection 4HF Tolerance O.. 1/ 4 (6.35) / (6.299 / 6.172) 3/ 8 (9.53) 0 / (9.398 / 9.271) 9/ 16 (14.29) / ( / ) Tube Size O.. 1 / 4 (6.35) I (2.11) -325 to 100 F (-198 to 57 ) 65,000 (4,500) 200 F (93 ) 58,500 (4,050) Working Pressure psi (bar) 400 F (204 ) 53,950 (3,750) 600 F (315 ) 49,400 (3,400) 800 F (426 ) 46,800 (3,250) Ultra 65TU6H TU6H TU9H TU9H S 09/ SS 304SS 316SS 304SS 6HF 9HF 65TU4H-HP160 HP160 4HF 65TU6H-HP160 HP160 6HF 3 / 8 (9.53) 9 / 16 (14.29) 1 / 4 (6.35) 3 / 8 (9.53) (3.18) (4.77) 0.06 (1.59) 0.16 (3.97) 65,000 (4,500) 65,000 (4,500) 101,000 (7,000) 152,000 (10,500) 58,500 (4,050) 58,500 (4,050) 82,600 (5,740) 124,000 (8,650) 53,950 49,400 46,800 (3,750) (3,400) (3,250) 53,950 49,400 46,800 (3,750) (3,400) (3,250) 72,600 66,500 61,500 (5,040) (4,620) (4,270) 108,800 99,800 92,200 (7,560) (6,930) (6,400) ll dimensions are for reference only and are subject to change. 9

30 oned and Threaded Nipples Pressures MXIMTOR offers a line of coned and threaded high pressure tube nipples in a variety of lengths for all standard tube sizes. The coned and threaded high pressure tube nipples are available in 316 stainless steel. See chart below for ordering information. Special length coned and threaded nipples are available upon request. onsult MXIMTOR for availability and price. ccessories 2.75 (69.85) Length 3 (76.2) Length atalog Numbers are 316 Stainless Steel material 4 (101.6) Length 6 (152,4) Length 8 (203.2) Length 10 (254) Length 12 (304.8) Length Fits onnection Tube Size in. (mm) N4H N4H N4H N4H N4H N4H N4H HF 1 / 4 (2.11) O.. I.. Working Pressure at 100 F psi (mm) 65,000 (4,500) Ultra Tools and 65N6H N6H N6H N6H N6H N6H HF 3 / 8 (3.17) 65,000 (4,500) N9H N9H N9H N9H N9H HF 9 / 16 (4.77) Standard nipples are not supplied with glands and collars, see Fittings on page 6 for these components. See adjacent Tubing page 8, for pressure/temperature rating chart. ll dimensions are for reference only and subject to change. 65,000 (4,500) Valve ctuators S 09/2007 all Valves

31 O-Ring heck Valves heck Valves Pressures O-Ring heck Valves all heck Valves MXIMTOR o-ring check valves provide high quality directional flow control and tight shutoff for liquids and gases. ll check valves are supplied with glands and collars. These check valves are not to be used as a relief device. Materials. ody, cover, poppet, cover gland: 316 series stainless steel Spring: 300 series stainless steel O-ring: Viton [-4 F to 392 F (-20 to 200 )] all heck Valves MXIMTOR ball check valves prevent reverse flow where bubble tight shutoff is not mandatory. These check valves are designed with a ball cradled floating poppet to assure positive inline seating. This poppet design allows full flow around the ball to minimize pressure drop. heck valves are rated to 660 F (350 ). ll check valves are supplied with glands and collars. These check valves are not to be used as a relief device. Materials. ody, cover, poppet, cover gland: 316 L series stainless steel all and spring: 300 series stainless steel Ultra Valve Pattern atalog Number onnection Pressure Rating psi (bar) Orifice Rated (v) imensions in. (mm) (Hex.) O-Ring heck Valves all heck Valves S 09/ O4H 65O6H 65O9H 654H 656H 659H 4HF 6HF 9HF 4HF 6HF 9HF 65,000 (4,500) 65,000 (4,500) 65,000 (4,500) 65,000 (4,500) 65,000 (4,500) 65,000 (4,500) (2.3) (4.8) (2.3) (4.8) (30.2) 1.19 (30.2) 1.63 (41.4) 1.19 (30.2) 1.19 (30.2) 1.63 (41.3) 3.40 (86.4) 3.81 (96.8) 4.61 (117.1) 3.40 (86.4) 3.81 (96.8) 4.61 (117.1) UTION: FREQUENT INSPETIONS of O-Rings are necessary to ensure proper service of the check valve. O-Rings have shown satisfactory service life in testing, however different service conditions may lead to variations in cycle and shelf life. ll dimensions are for reference only and subject to change. 11

32 Line Filters Pressures ual-isc Line Filters ual-isc Line Filters MXIMTOR dual-disc line filters are used to filter process fluids in high pressure systems. This design helps remove the large particles first through a coarse primary disc, which then allows a secondary disc to provide a smaller micron filtration. These filter elements are designed to withstand pressure surges without cracking, flaking, or rupturing. Filter elements come standard in the following micron sizes: 5/8, 8/30, 30/56 (secondary/primary). Filters are rated for temperatures -60 F to 660 F (-50 to 350 ). ll line filters come with glands and collars. Materials ody, cover, cover gland: 316 series stainless steel Element: 300 series stainless steel up- Line Filters MXIMTOR cup-type line filters are used when maximum filtration surface area and a single micron size element is preferred. This design increases the filter area as much as 6 times the area of the disc type filter, and will permit higher flow rates with a lower pressure drop, and longer intervals between element changes. Filter elements come standard in 5, 30, or 56 micron sizes and are easily replaced. Filters are rated for temperatures -60 F to 660 F (-50 to 350 ). ll line filters come with glands and collars. Materials: ody, cover, cover gland: 316 series stainless steel Element: 300 series stainless steel up- Line Filters Ultra ccessories Tools and atalog Number Pressure Rating psi (bar) Orifice Micron Size onnection Filter Element reas in. 2 (mm 2 ) imensions (Hex.) ual-isc Line Filters 65F4H-5/8 5/8 65, F4H-8/30 8/30 (4,500) (2.3) 65F4H-30/56 30/56 65F6H-5/8 5/8 65,000 65F6H-8/30 8/30 (4,500) 65F6H-30/56 30/56 65F9H-5/8 5/8 65, F9H-8/30 8/30 (4,500) (4.8) 65F9H-30/56 30/56 4HF 6HF 9HF 0.07 (50) 0.07 (50) 0.15 (95) 2.99 (76) 2.99 (76) 3.39 (86.1) 4.8 (121.9) 5.29 (134.4) 5.75 (146) 1.19 (30.2) 1.19 (30.2) 1.44 (36.6) Valve ctuators 12 up- Line Filters 65F4H , F4H (4,500) (2.3) 65F4H F6H ,000 65F6H (4,500) 65F6H F9H , F9H (4,500) (4.8) 65F9H It is recommended that all fluids entering a high pressure system be thoroughly cleaned. Maximator filters are designed to remove small amounts of process partcles. Pressure differential should not exceed 1000 psi across the filter elements S 09/2007 4HF 6HF 9HF 0.82 (530) 0.82 (530) 0.82 (530) 3.39 (86.1) 3.39 (86.1) 4.06 (103.1) 4.25 (108) 4.44 (112.8) 5.28 (134.1) 1.44 (36.6) 1.44 (36.6) 1.63 (41.3) ll dimensions for reference only and are subject to change. all Valves

33 Safety Head ssembly Pressures MXIMTOR safety head assemblies are used to provide over-pressure protection to high pressure systems. These safety head assemblies are to be used with the appropriate 1/ 4 " angular rupture disc listed in the chart below. Safety Head ssembly Safety Head ssembly atalog Number without isc Fits onnection Pressure Rating psi (bar) ody Torque ft - lbs. (Nm) (Hex.) (Hex.) imensions (LG.) (I..) E (I..) 65SH4H 4HF 65,000 (4,500) 25 (35) 1.06 (26.9) 0.88 (22.4) 2.57 (65.3) (2.11) (6.4) 65SH6H 6HF 65,000 (4,500) 50 (70) 1.06 (26.9) 0.88 (22.4) 2.54 (64.5) (6.4) 65SH9H 9HF 65,000 (4,500) 110 (150) 1.19 (30.2) 0.88 (22.4) 2.48 (63) (4.8) (6.4) ll dimensions are for reference only and are subject to change S 09/

34 1/4" ngular Rupture iscs Pressures atalog Number R-1200 R-1500 R-1750 R-2000 R-2500 R-3000 R-3500 R-4000 R-4500 R-5000 R-5500 R-6000 R-6500 Pressure range psi (bar) 1,164-1,272 ( ) 1,455-1,590 ( ) 1,697-1,855 ( ) 1,940-2,120 ( ) 2,425-2,650 ( ) 2,910-3,180 ( ) 3,395-3,710 ( ) 3,880-4,240 ( ) 4,365-4,770 ( ) 4,850-5,300 ( ) 5,335-5,830 ( ) 5,820-6,360 ( ) 6,305-6,890 ( ) atalog Number R-7000 R-7500 R-8000 R-8500 R-9000 R-9500 R R R R R R R Pressure range psi (mm) 6,790-7,420 ( ) 7,275-7,950 ( ) 7,760-8,480 ( ) 8,245-9,010 ( ) 8,730-9,540 ( ) 9,215-10,070 ( ) 9,700-10,600 ( ) 10,670-11,660 ( ) 11,640-12,720 ( ) 12,610-13,780 ( ) 13,580-14,840 ( ) 14,550-15,900 (1, ,096.6) 15,520-16,960 (1, ,169.7) 1/ 4 " angular seat rupture discs are designed to be used with the safety head assemblies that are shown above. Minimum rupture disc pressure ratings should be at least 110% of system operating pressure. The standard rupture disc material is Inconel. The pressure ranges indicated in the table below are at room temperature (72 F). Other materials and pressure ranges are available upon request. atalog Number R R R R R R R R R R R R R Pressure range psi (bar) 16,490-18,020 (1, ,242.8) 17,460-19,080 (1, ,315.9) 18,430-20,140 (1,271-1,389) 19,400-21,200 (1, ,462.1) 20,370-22,260 (1, ,535.2) 21,340-23,320 (1, ,608.3) 22,310-24,380 (1, ,681.4) 23,280-25,440 (1, ,754.5) 24,250-26,500 (1, ,827.6) 25,220-27,560 (1, ,827.6) 26,190-28,620 (1, ,973.8) 27,160-29,680 (1, ,046.9) 28,130-30,740 (1,940-2,120) atalog Number R R R R R R R R R R R R R Pressure range psi (bar) 29,100-31,800 (2, ,193.1) 31,525-34,450 (2, ,375.9) 33,950-37,100 (2, ,558.6) 36,375-39,750 (2, ,741.4) 38,880-42,400 (2, ,924.1) 41,255-45,050 (2, ,106.9) 43,650-47,700 (3, ,289.7) 46,075-50,350 (3, ,472.4) 48,500-53,000 (3, ,655.2) 53,350-58,300 (3, ,020.7) 58,200-63,600 (4, ,386.2) 65,475-71,550 (4, ,934.5) 67,900-74,200 (4, ,117.2) Ultra Valve ctuators ccessories Tools and Rupture iscs are individually packed and marked type plate S 09/2007 all Valves

35 MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by one of the best service organizations in the industry. Ultra Valves feature: u Rising stem design. u 316SS wetted parts with a 17-4 PH stem provides excellent corrosion resistance. u Metal-to-metal seating achieves bubble-tight shut-off, longer stem and seat life and greater durability for repeated open and close cycles. u PTFE and carbon packing with metal back-up rings offers reliable stem to body sealing. u Non-rotating stem prevents stem to seat galling. u Stem sleeve and packing gland materials have been selected to achieve optimum thread cycle life and reduced handle torque. ll stem sleeve threads are rolled, assuring smooth operation. u Safety weep holes for all pressure connections and packing area. u Three different valve body patterns, with vee type stem tip. MXIMTOR offers a complete line of ultra high pressure valves, fittings and tubing. They come standard with the 5/16 ultra high pressure coned and threaded connection. Factory MXIMTOR GmbH Walkenrieder Str. 15 Telephon: / Zorge / Germany Facsimile: / Internet info@maximator.de S 09/2007 Ultra Valves, Fittings and Tubing Pressures Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. Ultra Index High linkspressure Index Valves rated to 101,000 psi (7,000 bar) Fittings rated to Fittings 152,000 rated psi (10,500 bar) Tubing & oned and Threaded Tubing & oned Nipples and Threaded Nipples Ultra

36 I I Ultra Valves Pressures to 101,000 psi (7,000 bar) O.. Size onnection Orifice Size in. (mm) Rated v* Pressure/Temp. Rating psi R.T.** 5/ 16 (7.94) 5UF (1.58) ,000 (10,500) Ordering Typical catalog number: 101V5U V 5U 07 1 Valve Series O.. Tube Size Stem ody Pattern 101V 5U 5 / VEE stem 1 two-way straight 2 two-way angle 3 three-way, two on pressure Valve Pattern 2-Way Straight J E G F H atalog Number Stem type O.. Tube in. Orifice in. (mm) * v values shown are for 2-way straight pattern vee stem valves. For 2-way angle patterns, increase the v value by 50% ** See page 2 in the Section for Pressure/Temperature Rating hart. Number of turns open U071 5 / 16 (1.58) (137.9) (62) Flow oefficient Reference urve (v) Stem % of rated v Temperature Ranges Standard valves are supplied with Teflon/arbon packing and may be operated to 450 F (230 ). onsult MXIMTOR for higher temperature packing ratings (44.5) (8.4) imensions E F H I J K 0.51 (13) 1.77 (45) (100) (36.6) (77) Valve Panel Hole 1.12 (28.5) lock Thickness 1.26 (32) Ultra I 2 2-Way ngle J 3-Way / 2 on Pressure J E K F E K G G H F H 1015U072 5 / (1.58) 1015U073 5 / (1.58) 6.18 (157) 2.99 (76) S 09/ (36.6) (8.4) (163.6) (82.6) (44.5) (8.4) 0.35 (8.9) 0.51 (13) 1.97 (50) 1.77 (45) (100) (38.1) (57.9) (13) (100) (38.6) (77) 1.12 (28.5) (36.6) (28.5) 1.26 (32) 1.26 (32) G - Panel mounting screw size UN. ll dimensions are for reference only and subject to change.

37 Ultra Fittings Pressures MXIMTOR ultra high pressure fittings are designed to be used with the 101V series ultra high pressure valves and ultra high pressure tubing. ll ultra high pressure fittings have coned and threaded type connections and are supplied with glands and collars. Mounting holes are standard on all elbows, tees, and crosses. Tubing Size Gland ollar Plug Tubing ap 5 / G5U 1525U 152P5U 152T5U Elbow Tee E Fitting Pattern G F F G E atalog Number onnection O.. Tube Size in. Orifice in. (mm) 152L5U 5UF 5 / (2.4) 152T5U 5UF 5 / (2.4) onnection omponents ll ultra high pressure fittings are supplied with glands and collars. Refer to the adjacent chart for ordering any of the connection components individually. When using the plug, the collar is not needed (38.6) 1.52 (38.6) 2.13 (54.1) 2.13 (54.1) imensions E F G 3.03 (77) 3.03 (77) 1.52 (38.6) 1.52 (38.6) 0.92 (23.4) 0.92 (23.4) 0.92 (23.4) 1.83 (46.5) 0.33 (8.4) 0.33 (8.4) lock Thickness 1.26 (32) 1.26 (32) Ultra ross Straight oupling / Union oupling ulkhead oupling G F S 09/2007 E E max. panel hole 152X5U 5UF 5 / (2.4) 152F5U 152UF5U 5UF 5 / (2.4) 152F5U 5UF 5 / (2.4) 1.52 (38.6) 2.64 (67.1) 3.27 (83.1) (77) (77) 1.19 (30.2) (55.1) (36.1) (38.6) (23.4) Straight oupling Union oupling (36.3) (22.1) (46.5) (8.4) 1.26 (32) See page 2 in the Section for pressure/temperature rating chart. ll dimensions for reference only and are subject to change. 3

38 Ultra Tubing & Threaded Nipples Pressures MXIMTOR offers a line of cold drawn thick wall tubing, with flow areas to compliment the ultra high pressure valve and fitting line. This tubing is made under strict manufacturing and quality control standards and inspections, with dimensional tolerances to match the requirements of the ultra high pressure coned and threaded connections. The standard material is 316 stainless steel. atalog Number Tubing Tolerances Normal Tubing Size Tolerance O.. 5/ 16 (7.94) / (7.874 / 7.72) Tube Material Fits onnection 152TU5U SS 5UF 152TU5U-HP160 HP160 5UF ll dimensions are for reference only and subject to change. Tube Size O.. 5 / 16 (7.94) 5 / 16 (7.94) I (1.58) (1.58) oned and Threaded Nipples -325 to 100 F (-198 to 37 ) 152,000 (10,500) 152,000 (10,500) 200 F (93 ) 136,800 (9,500) 124,000 (8,600) Working Pressure psi (bar) 400 F (204 ) 126,160 (8,700) 108,800 (7,560) 600 F (315 ) 115,520 (8,000) 99,800 (6,930) 800 F (426 ) 109,44 (7,600) 92,200 (6,400) Ultra MXIMTOR offers a line of coned and threaded ultra high pressure tube nipples in a variety of lengths. The coned and threaded ultra high pressure tube nipples are available in 316 stainless steel. See chart below for ordering information. Special length coned and threaded nipples are available upon request. onsult MXIMTOR for availability and price. 4 4 (101.6) Length atalog Numbers are 316 Stainless Steel material 6 (152.4) Length 8 (203.2) Length 10 (254) Length S 09/ (304.8) Length Fits onnection 152N5U N5U N5U N5U N5U UF Standard nipples are not supplied with glands and collars, see Fittings on page 3 for these components. See the above chart for Pressure/Temperature Rating. ll dimensions are for reference only and subject to change. Tube Size O.. 5/ 16 (7.94) I (1.58) Working Pressure at 100 F psi (bar) 152,000 (10,500)

39 MXIMTOR air operated valve actuators are piston type design, and are mounted on a standard manual valve to provide remote control capability. There are two air to open actuators available, and selection is based on the valve size, system pressure, and air pressure available. Valve ctuator features: u Piston style valve actuator design offers dependable operation and longer actuator cycle life. u ctuators can be added to standard manual valve bodies to provide remote control capabilities in process applications. u Two different size actuators are available to cover varying plant air supplies. u ctuators are made of anodized aluminum, which provides good corrosion resistance. u ctuators are available in normally open or normally closed configuration. MXIMTOR offers a complete line of high pressure valves, fittings and tubing to compliment the valve actuator line. Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. Factory MXIMTOR GmbH Walkenrieder Str. 15 Telephon: / Zorge / Germany Facsimile: / Internet info@maximator.de S 09/2007 Valve ctuators Valve Index ctuator links Index ir to Open / Normally losed ir to lose Normally Open 4-5 ir to lose / Normally Open Ultra

40 ir Valve ctuators ir to Open, Normally losed Ordering Select the basic manual valve from the appropriate pressure section, then add the actuator suffix number to the end of the manual valve catalog number. Example: 21V4M071-MN, medium duty actuator, normally closed. This valve can be operated at 21,000 psi (1,500 bar) with an air supply of 118 psi (8.1 bar) to the valve actuator. Maximum allowable working pressure for actuator 145 psi (10 bar) Maximum operation temperature range for actuator -22 F to +176 F (-30 to 80 ) ctuator material nodized luminum ir connection size: 1 / 4 SP Female ( 1 / 4 NPT Female dapter) ctuator Valve Series Ordering Suffix Ordering Suffix Piston rea in. 2 (mm 2 ) Light uty -LN (7,854) Medium uty -MN (13,273) Heavy uty -HN * dimension is an approximation only. (20,100) ir ctuator (294.6) (294.6) (337.8) (254) (254) (271.8) ata 0-7 (0-480) 4.72 (120) 5.91 (150) 7.10 (180.3) ir Pressure ulated to Open Valve t: System Pressure ksi (bar) 10 (700) * 2.50 (63.5) 2.50 (63.5) 2.75 (69.9) 12 (830) 14 (970) 16 (1,100) 18 (1,250) 20 (1,400) 21 (1,500) Max. Pressure psi (bar) Flow Value v* Ultra 2 21V4 and 21V6 21V9 Light uty Medium uty Heavy uty Heavy uty -LN -MN -HN -HN ir Pressure psi (bar) 130 (9) 136 (9.4) S 09/ (9.7) 145 (10) Spring Pre-compression (25.4) (28.4) (32.5) (35.0) Stem Travel 0.33 (8.4) ir Pressure psi (bar) 98 (6.8) 102 (7) 104 (7.2) 107 (7.4) 110 (7.6) Spring Pre-compression 1.00 (25.4) 1.12 (28.4) 1.28 (32.5) 1.38 (35.0) 1.49 (37.8) Stem Travel 0.33 (8.4) ir Pressure psi (bar) 86 (5.9) 92 (6.3) 94 (6.5) 96 (6.6) 98 (6.8) Spring Pre-compression 0.68 (17.2) 0.78 (19.8) 0.81 (20.6) 0.87 (22.1) 0.91 (23.1) Stem Travel 0.33 (8.4) ir Pressure psi (bar) 116 (8) 130 (8.9) 138 Spring Pre-compression 0.47 (11.3) 0.94 (23.9) 1.44 (36.6) Stem Travel 0.50 (12.7) * v value is for straight pattern vee stem valves. Increase this value by 50% for angle pattern valves. v Values vary due to compression of actuator spring, adjusted based on system pressure. Values shown are for maximum stem travel. 145 (10) 2.00 (50.8) 112 (7.7) 1.58 (40.1) 100 (6.9) 0.94 (23.9) 116 (8) 1.71 (43.4) 102 (7) 1.00 (25.4) 118 (8.1) 1.77 (45) 103 (7.1) 1.03 (26.2) 14,500 (1,000) 21,000 (1,500) 21,000 (1,500) 14,500 (1,000) - 1 / /

41 Valve Series 36V 65V 101V Light uty Medium uty Heavy uty Light uty Medium uty Heavy uty Light uty Medium uty Heavy uty S 09/2007 Ordering Suffix -LN -MN -HN -LN -MN -HN -LN -MN -HN ir ctuator ata ir Pressure psi (bar) Spring Pre-compression ir Pressure ulated to Open Valve t: System Pressure ksi (bar) 0-7 (0-480) 116 (8) 0.94 (23.9) 10 (700) 125 (8.6) 1.03 (26.2) 15 (1,050) 133 (9.2) 1.28 (32.5) Stem Travel 0.15 (3.8) ir Pressure psi (bar) Spring Pre-compression 93 (6.4) 0.94 (23.9) 96 (6.6) 1.03 (26.2) 103 (7.1) 1.28 (32.5) 20 (1,400) 145 (10) 1.44 (36.6) 108 (7.4) 1.44 (36.6) Stem Travel 0.15 (3.8) ir Pressure psi (bar) Spring Pre-compression 74 (5.1) 0.75 (19.1) 76 (5.2) 0.81 (20.6) (22.4) 86 (6) 0.94 (23.9) 25 (1,800) 113 (7.8) 1.58 (40.1) 91 (6.3) 1.03 (26.2) Stem Travel 0.15 (3.8) ir Pressure psi (bar) Spring Pre-compression 0-7 (0-480) 102 (7) 0.75 (19.1) 10 (700) 110 (7.6) 0.84 (21.3) 20 (1,400) 122 (8.4) 1.06 (26.9) 30 (2,000) 131 (9) 1.25 (31.7) 40 (2,800) 145 (10) 1.44 (36.6) Stem Travel (9.4) ir Pressure psi (bar) Spring Pre-compression (19.1) 84 (5.8) 0.84 (21.3) 97 (6.7) 1.06 (26.9) 100 (6.9) 1.25 (31.7) Stem Travel (9.4) ir Pressure psi (bar) Spring Pre-compression 65 (4.5) 0.53 (13.5) 70 (4.8) 0.56 (14.2) 75 (5.2) 0.63 (16) 80 (5.5) 0.81 (20.6) 110 (7.6) 1.44 (36.6) 85 (5.9) 0.94 (23.9) Stem Travel (9.4) ir Pressure psi (bar) Spring Pre-compression 0-7 (0-480) 72 (5) 0.88 (22.4) 15 (1,050) 87 (6) 0.94 (23.9) 30 (2,000) 109 (7.5) 1.31 (33.3) 45 (3,100) 123 (8.5) 1.55 (39.4) 60 (4,100) 145 (10) 1.88 (47.8) Stem Travel 0.28 (7.1) ir Pressure psi (bar) Spring Pre-compression 84 (5.8) 0.88 (22.4) 90 (6.2) 0.94 (23.9) 102 (7) 1.31 (33.3) Stem Travel 0.28 (7.1) ir Pressure psi (bar) Spring Pre-compression 60 (4.1) 0.56 (14.2) 66 (4.6) 0.63 (16) 76 (5.2) 0.78 (19.8) 114 (7.9) 1.55 (39.4) 86 (5.9) 0.88 (22.4) 126 (8.7) 1.88 (47.8) 96 (6.6) 1.03 (26.2) Stem Travel 0.28 (7.1) * v value is for straight pattern vee stem valves. Increase this value by 50% for angle pattern valves. v Values vary due to compression of actuator spring, adjusted based on system pressure. Values shown are for maximum stem travel. ir Valve ctuators ir to Open, Normally losed 30 (2,000) 116 (8) 1.73 (43.9) 96 (6.6) 1.12 (28.4) 50 (3,500) 118 (8.1) 1.63 (41.4) 90 (6.2) 0.97 (24.6) 75 (5,200) 106 (7.3) 1.15 (29.2) 35 (2,400) 101 (7) 1.19 (30.2) 60 (4,100) 95 (6.6) 1.00 (25.4) 90 (6,200) 116 (8) 1.28 (32.5) 36 (2,500) 102 (7) 1.25 (31.7) 65 (4,500) 97 (6.7) 1.03 (26.2) 101 (7,000) 122 (8.4) 1.38 (35.1) Max. Pressure psi (bar) 20,000 (1,400) 29,000 (2,000) 36,000 (2,500) 40,000 (2,800) 50,000 (3,500) 65,000 (4,500) 60,000 (4,100) 60,000 (4,100) 101,000 (7,000) Flow Value v* / / / / / / Ultra

42 ir Valve ctuators ir to lose, Normally Open Ordering Select the basic manual valve from the appropriate pressure section, then add the actuator suffix number to the end of the manual valve catalog number. Example: 21V4M071-MNO, medium duty actuator, normally open. This valve can be operated at 21,000 psi (1,500 bar) with an air supply of 106 psi (7.3 bar) to the valve actuator. Maximum allowable working pressure for actuator 145 psi (10 bar) Maximum operation temperature range for actuator -22 F to +176 F (-30 to +80 ) ctuator material nodized luminum ir connection size: 1 / 4 SP Female ( 1 / 4 NPT Female dapter) ctuator Light uty Medium uty Heavy uty Ordering Suffix -LNO -MNO -HNO Piston rea in. 2 (mm 2 ) (7,854) (13,273) (20,100) 5.70 (145) 5.70 (145) 5.70 (145) 4.10 (104.1) 4.10 (104.1) 4.10 (104.1) 4.72 (120) 5.91 (150) 7.10 (180.3) Ultra 4 Valve Series 21V4 and 21V6 Light uty Medium uty Heavy uty ir ctuator Ordering Suffix -LNO -MNO -HNO 21V9 Heavy uty -HNO ir Pressure ulated to lose Valve t: System Pressure ksi (bar) 0-7 (0-480) 87 (6) 72 (5) 52 (3.6) 88 (6.1) * v value is for straight pattern vee stem valves. Increase this value by 50% for angle pattern valves. 10 (700) 99 (6.8) 79 (5.4) 56 (3.9) 100 (6.9) 12 (830) 104 (7.2) 83 (5.7) 59 (4.1) 108 (7.4) 14 (970) 115 (7.9) 88 (6.1) 62 (4.3) 116 (8) S 09/ (1,100) (1,250) (1,400) (1,500) 117 (8.1) 93 (6.4) 65 (4.5) 124 (8.5) 130 (9) 98 (6.8) 68 (4.7) 132 (9.1) 142 (9.8) 103 (7.1) 71 (4.9) 140 (9.7) 145 (10) 106 (7.3) 75 (5.2) 146 (10) Max. Pressure psi (bar) 21,000 (1,500) 21,000 (1,500) 21,000 (1,500) 21,000 (1,500) Stem Travel in. (mm) 0,33 (8.4) 0,33 (8.4) 0,33 (8.4) 0.50 (12.7) Flow Value v* / /

43 ir Valve ctuators ir to lose, Normally Open Valve Series ir ctuator Ordering Suffix ir Pressure ulated to lose Valve t: System Pressure ksi (bar) 0-7 (0-480) 10 (700) (1,050) (1,400) (1,800) (2,000) (2,400) (2,500) Max. Pressure psi (bar) Stem Travel in (mm) Flow Value v* 36V 65V 101V Light uty Medium uty Heavy uty Light uty Medium uty Heavy uty Light uty Medium uty Heavy uty -LNO -MNO -HNO -LNO -MNO -HNO -LNO -MNO -HNO 73 (5) 78 (5.4) 91 (6.3) 106 (7.3) 119 (8.2) 128 (8.8) 142 (9.8) 145 (10) (4.5) (4.8) (5.2) (5.7) (6.2) (6.8) (7.3) (7.4) (3.1) (3.4) (3.9) (4.3) (4.8) (5.3) (5.8) (5.9) (0-480) (700) (1,400) (2,000) (2,800) (3,500) (4,100) (4,500) (4) (4.8) (5.3) (6.3) (7.3) (8.5) (9.2) (10) (3.8) (3.9) (4.5) (5.2) (5.9) (6.4) (7) (7.4) (2.1) (2.2) (2.9) (3.6) (4.3) (5) (5.7) (5.9) (0-480) (1,050) (2,000) (3,100) (4,100) (5,200) (6,200) (7,000) 65 (4.5) 61 (4.2) 40 (2.8) 87 (6) 73 (5.0) 45 (3.1) 106 (7.3) 89 (6.1) 55 (3.8) 131 (9) 96 (6.6) 65 (4.5) 108 (7.4) 75 (5.2) 119 (8.2) 85 (5.9) 131 (9) 95 (6.6) 140 (9.7) 102 (7) 36,000 (2,500) 36,000 (2,500) 36,000 (2,500) 65,000 (4,500) 65,000 (4,500) 65,000 (4,500) 45,000 (3,100) 101,000 (7,000) 101,000 (7,000) 0.15 (3.8) 0.15 (3.8) 0.15 (3.8) (9.4) (9.4) (9.4) 0.28 (7.1) 0.28 (7.1) 0.28 (7.1) / / / / / / * v value is for straight pattern vee stem valves. Increase this value by 50% for angle pattern valves. Ultra S 09/2007 5

44 MXIMTOR ball valves provide superior quality and performance with a variety of valve styles and process connections. ll medium and high pressure connections are supplied with glands and collars. all Valves feature: u One-piece, trunnion mounted style stem design eliminates shear failure found in two-piece stem designs. u hoice of 3/16 and 1/4 ball orifices provides minimal pressure drops. u Re-torqueable seat glands for longer seat life and dependability. u Torlon all Seat material offers excellent sealing capabilities. u 316 cold worked stainless steel body, and 17-4 PH stem offers excellent corrosion resistance. u all valves are available in 90 and 180 open to close with a positive stop. u vailable with Pneumatic or Electric actuators. u vailable in medium, high and FNPT pressure connections. u Full materials traceability. u Safety weep holes for all pressure connections and packing area. MXIMTOR offers a complete line of high pressure components to compliment the 2-way and 3-way all Valve line. Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. Factory MXIMTOR GmbH Walkenrieder Str. 15 Telephon: / Zorge / Germany Facsimile: / Internet info@maximator.de S 09/2007 all Valves Pressures all Index Valve linksindex 2-Way all Valves Way all Valves.3 3-Way all Valves Pneumatic ctuators Electric Pneumatic ctuators ctuators Electric ctuators Ultra

45 2-Way all Valves 1 /4 Orifice Pressures Manually Operated 2-Way all Valve MXIMTOR 2-Way all Valves have 1 /4 orifices and are capable of safe handling of liquids and gases up to 21,000 psi (1,500 bar) pressure. Their 90 handle rotation allows for full flow capabilities with minimal pressure drop. Robust onepiece trunnion style stem design eliminates shear failure that is found in a two-piece stem design. all seats are made of Torlon material providing excellent sealing capabilities with low handle operating torque. Re-torqueable seat glands provide longer valve life and dependability. Standard valves are supplied with Viton O-Rings rated to 300 F (150 ). Ordering Typical catalog number: 21244M M - Pressure (x 1000 psi) 15 = 15,200 psi (1,050 bar) 21 = 21,000 psi (1,500 bar) Valve Series 2 = all Valve 2-way Orifice iameter onnection Options 4 = 1 / 4 See chart below See all Valve ctuators (page 4 & 5) Pressure Temperature Ratings Ultra 2 atalog Number Pressure RT psi. (bar) O. Tubing Size in. onnection S 09/ M 21,000 (1,500) 1 /4 4MF (2.8) (107) 1.03 (26.2) 1.00 (25.4) 21246M 21,000 (1,500) 3 /8 6MF (5.2) (107) 1.03 (26.2) 1.00 (25.4) 21249M 21,000 (1,500) 9 /16 9MF (6.4) (107) 1.03 (26.2) 1.00 (25.4) 21244H 21,000 (1,500) 1 /4 4HF (2.4) (107) 1.03 (26.2) 1.00 (25.4) 21246H 21,000 (1,500) 3 /8 6HF (107) 1.03 (26.2) 1.00 (25.4) 21249H 21,000 (1,500) 9 /16 9HF (4.8) (123) 1.03 (26.2) 1.38 (35.1) 15242P 15,200 (1,050) 1 /8 FNPT (6.4) (107) 1.03 (26.2) 1.00 (25.4) 15244P 15,200 (1,050) 1 /4 FNPT (6.4) (107) 1.03 (26.2) 1.00 (25.4) 15246P 15,200 (1,050) 3 /8 FNPT (6.4) (107) 1.03 (26.2) 1.00 (25.4) 15248P 15,200 (1,050) 1 /2 FNPT (6.4) (123) 1.03 (26.2) 1.38 (35.1) aution: all valves are not recommended for small molecular gases (Hydrogen, Helium). ll dimensions are for reference only and subject to change. Orifice Size v imension Valve Panel Hole lock Thickness

46 3-Way all Valves 3 /16 Orifice Pressures MXIMTOR 3-Way all Valves have 3 /16 orifices and are capable of safe handling of liquids and gases up to 21,000 psi (1,500 bar) pressure. Robust one-piece trunnion style stem design eliminates shear failure that is found in a twopiece stem design. There are two styles in the 3-way design: Manual 3-Way all Valve - The 180 rotating Switching all Valve is designed to have fluid enter in through the bottom connection and can be switched to either side connection. lso, the valve can be closed in the center Off position. - The 90 rotating iverting all Valve is designed to have fluid enter in through the bottom connection and can be diverted to either side connection. There is no center off position in the diverting design. Ordering Typical catalog number: 213S34M 21 3S 3 4M - Pressure (x 1000 psi) Valve Series 15 = 15,200 psi 3S = 180 Switching (1,050 bar) 3 = 90 iverting 21 = 21,000 psi (1,500 bar) Orifice iam- onnection 3 = 3 /16 See chart below 3-Way, 180 Switching Style Open losed Open Options See all Valve ctuators (page 4 & 5) Ultra 3-Way, 90 iverting Style 3-Way 180 Switching atalog Number 213S34M 21334M 21,000 (1,500) 1 /4 4MF (2.8) (26.2) 1.00 (25.4) 213S36M 21336M 21,000 (1,500) 3 /8 6MF (4.8) (26.2) 1.00 (25.4) 213S39M 21339M 21,000 (1,500) 9 /16 9MF (4.8) (26.2) 1.00 (25.4) 213S34H 21334H 21,000 (1,500) 1 /4 4HF (2.4) (26.2) 1.00 (25.4) 213S36H 21336H 21,000 (1,500) 3 /8 6HF 1.03 (26.2) 1.00 (25.4) 213S39H 21339H 21,000 (1,500) 9 /16 9HF (4.8) (26.2) 1.00 (25.4) 153S32P 15332P 15,200 (1,050) 1 /8 FNPT (4.8) (26.2) 1.00 (25.4) 153S34P 15334P 15,200 (1,050) 1 /4 FNPT (4.8) (26.2) 1.00 (25.4) 153S36P 15336P 15,200 (1,050) 3 /8 FNPT (4.8) (26.2) 1.00 (25.4) 153S38P 15338P 15,200 (1,050) 1 /2 FNPT (4.8) (26.2) 1.00 (25.4) S 09/ Way 90 iverting Pressure RT psi. (bar)* O. Tubing Size in. * Maximum side connection inlet pressure is 15,000 psig. aution: all valves are not recommended for small molecular gases (Hydrogen, Helium). onnection Orifice Size Open v Open Valve Panel Hole lock Thickness See page 2 for pressure/temperature rating chart. ll dimensions are for reference only and subject to change. 3

47 all Valve ctuators Pneumatic ctuators ir Operated 2-Way all Valve Pneumatic ctuator Features u Pneumatic actuators are designed to be used with 2-way & 3-way style ball valves for remote operation. ir Operated 3-Way all Valve, 90 iverter Style u Two styles available: ouble acting: (air to open / air to close) Single acting: (air to open / spring to close) u Optional limit switches with visual indication available. u ctuators are anodized aluminum, which provides good corrosion resistance. Stainless steel material is available upon request. u Maximum operating air pressure is 145 psi (10 bar). u Inlet air supply connection is 1 /8 FNPT u ctuator operating temperature: -4 F to 203 F (-20 to 95 ). u Minimal required air pressure is 80 psi (5.5 bar). u Opening & closing time is less than one second. Ordering Simply add suffix to the manual ball valve catalog number: - (ouble cting ir ctuators) - S (Single cting ir ctuators) ir Operated 3-Way all Valve, 180 Switching Style Ultra ll dimensions are for reference only and are subject to change S 09/2007 (vailable in double acting only)

48 all Valve ctuators Electric ctuators Electric ctuator Features u Electric actuators are designed to be used with 2-way & 3-way style ball valves for remote operation. Electrically Operated 2-Way all Valve u ctuators will accept a wide range of single phase input voltages from 12 to 240 volts or current. u Optional limit switches with visual indication available. u Manual override option is standard. u ctuators are made with polyamide material, which provides good corrosion resistance. u ctuator operating temperature: -0 F to 160 F (-18 to 70 ). u Opening & closing time is less than ten seconds with 90 actuators. Ordering Simply add suffix to the manual ball valve catalog number: - EL = Electric ctuator, lower voltage, (12-48 Volts or ) - EH = Electric ctuator, higher voltage, ( Volts or ) Electrically Operated 3-Way all Valve Ultra S 09/2007 ll dimensions are for reference only and are subject to change 5

49 MXIMTOR designs and manufactures a wide variety of adapters and couplings in an array of styles and sizes. The adapters in this section are considered standard and readily available. Other materials and configurations are available upon request. dapters, & ccessories feature: u dapters & are 316 cold worked stainless steel material. u Traceability is ensured by component laser etching, and through extensive documentation which includes: part number, pressure, material batch numbers, and connection type. u dapters are available in one or two-piece designs. u Safety weep holes come standard on all pressure connections. u ll medium, high and ultra high pressure come complete with glands and collars. MXIMTOR offers a complete line of standard high pressure adapters and couplings to compliment our valve line. Special design adapters and materials are available upon request. Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. Factory MXIMTOR GmbH Walkenrieder Str. 15 Telephon: / Zorge / Germany Facsimile: / Internet info@maximator.de S 09/2007 Pressures Index dapters, links & ccessories Index dapters (male to female) dapters (male to female) (female to female) & (female to female) dapters (male to male) dapters (male to male) Ultra

50 dapters (male to female) dapters (male to female) MXIMTOR male to female adapters allow the joining of male to female connections. The two connections can be a variety of tube or pipe connection types, with different size combinations possible. ll adapters are made of 316 cold worked stainless steel material; other materials are available upon request. Glands and collars are included with each female tube connection. Instructions Find the male connection you want on the adapter in the column and the female connection of the adapter in the column. t the intersection of the two columns is the appropriate catalog number. Pressure Series Male Medium Tube Size in. Male onnection onnection Maximum Pressure psi (bar)* 1 / 4 4MF 3 / 8 6MF Female onnection Female 21,000 psi (1,500 bar) 1 / 4 4MM 21,000 (1,500) 214M6M 214M9M 214M12M 214M16M 3 / 8 6MM 21,000 (1,500) 216M4M 216M9M 216M12M 216M16M 9/ 16 9MM 21,000 (1,500) 219M4M 219M6M 219M12M 219M16M 3/ 4 12MM 21,000 (1,500) 2112M4M 2112M6M 2112M9M 2112M16M 1 16MM 21,000 (1,500) 2116M4M 2116M6M 2116M9M 2116M12M 1 / 4 4HM 65,000 (4,500) 214H4M 214H6M 214H9M 214H12M 214H16M 9 / 16 9MF 3 / 4 12MF 1 16MF Ultra Male High 3 / 8 6HM 65,000 (4,500) 216H4M 216H6M 216H9M 216H12M 216H16M 9 / 16 9HM 65,000 (4,500) 219H4M 219H6M 219H9M 219H12M 219H16M 2 Male Ultra High Male Pipe Male ritish Standard Pipe 5/ 16 5UM 152,000 (10,500) 215U4M 215U6M 215U9M 215U12M 215U16M 1/ 8 MNPT 15,200 (1,050) 152P4M 152P6M 152P9M 152P12M 152P16M 1 / 4 MNPT 15,200 (1,050) 154P4M 154P6M 154P9M 154P12M 154P16M 3 / 8 MNPT 15,200 (1,050) 156P4M 156P6M 156P9M 156P12M 156P16M 1 / 2 MNPT 15,200 (1,050) 158P4M 158P6M 158P9M 158P12M 158P16M 3 / 4 MNPT 15,200 (1,050) 1512P4M 1512P6M 1512P9M 1512P12M 1512P16M 1 MNPT 15,200 (1,050) 1516P4M 1516P6M 1516P9M 1516P12M 1516P16M 1 / 8 MSP 15,200 (1,050) 1524M 1526M 1529M 15212M 15216M 1 / 4 MSP 15,200 (1,050) 1544M 1546M 1549M 15412M 15416M 3 / 8 MSP 15,200 (1,050) 1564M 1566M 1569M 15612M 15616M 1 / 2 MSP 15,200 (1,050) 1584M 1586M 1589M 15812M 15816M 3/ 4 MSP 15,200 (1,050) 15124M 15126M 15129M M M 1 MSP 15,200 (1,050) 15164M 15166M 15169M M M * The pressure rating of any adapter is the value of the lowest rated connection in the fitting. Note: ll Maximator adapters come standard in the one-piece design style. dapters with the two piece design are avaiable by adding a suffix -2P after the part numbers listed above. oth designs are identical in length, and are interchangeable with each other S 09/2007 of sale, including limitations of our liability, apply to all products and services sold

51 dapters (male to female) 5 1/ 4 4HF Female 65,000 psi (4,500 bar) 3/ 8 6HF 9/ 16 9HF Female Ultra-High Pressure 152,000 psi (10,500 bar) 5/ 16 5UF Female onnection 1/ 8 FNPT 1/ 4 FNPT Female Pipe 15,200 psi (1,050 bar) 3/ 8 FNPT 1/ 2 FNPT 3/ 4 FNPT 1 FNPT 1/ 8 FSP 1/ 4 FSP Female ritish Standard Pipe 15,200 psi (1,050 bar) 214M4H 214M6H 214M9H 214M5U 154M2P 154M4P 154M6P 154M8P 154M12P 154M16P 154M2 154M4 154M6 154M8 154M12 154M16 216M4H 216M6H 216M9H 216M5U 156M2P 156M4P 156M6P 156M8P 156M12P 156M16P 156M2 156M4 156M6 156M8 156M12 156M16 219M4H 219M6H 219M9H 219M5U 159M2P 159M4P 159M6P 159M8P 159M12P 159M16P 159M2 159M4 159M6 159M8 159M12 159M M4H 2112M6H 2112M9H 2112M5U 1512M2P 1512M4P 1512M6P 1512M8P 1512M12P 1512M16P 1512M2 1512M4 1512M6 1512M8 1512M M M4H 2116M6H 2116M9H 2116M5U 1516M2P 1516M4P 1516M6P 1516M8P 1516M12P 1516M16P 1516M2 1516M4 1516M6 1516M8 1516M M16 3/ 8 FSP 1/ 2 FSP 3/ 4 FSP 1 FSP Ultra 654H6H 654H9H 654H5U 154H2P 154H4P 154H6P 154H8P 154H12P 154H16P 154H2 154H4 154H6 154H8 154H12 154H16 656H4H 656H9H 656H5U 156H2P 156H4P 156H6P 156H8P 156H12P 156H16P 156H2 156H4 156H6 156H8 156H12 156H16 659H4H 659H6H 659H5U 159H2P 159H4P 159H6P 159H8P 159H12P 159H16P 159H2 159H4 159H6 159H8 159H12 159H16 655U4H 655U6H 655U9H 155U2P 155U4P 155U6P 155U8P 155U12P 155U16P 155U2 155U4 155U6 155U8 155U12 155U16 152P4H 152P6H 152P9H 152P5U 154P4H 154P6H 154P9H 154P5U 156P4H 156P6H 156P9H 156P5U 158P4H 158P6H 158P9H 158P5U 1512P4H 1512P6H 1512P9H 1512P5U 1516P4H 1516P6H 1516P9H 1516P5U 1524H 1526H 1529H 1525U 1544H 1546H 1549H 1545U 1564H 1566H 1569H 1565U 1584H 1586H 1589H 1585U 15124H 15126H 15129H 15125U 15164H 15166H 15169H 15165U S 09/ * The pressure rating of any adapter is the value of the lowest rated connection in the fitting. 4

52 dapters (male to female) and dapters (female to female) MXIMTOR couplings are female to female fittings that allow the joining of two different sizes and/or types of connections for a variety of size combinations. ll couplings and adapters are made of 316 cold worked stainless steel material; other materials are available upon request. Glands and collars are included with each female tube connection. Instructions Find the first connection you want in the column and the other connection in the column. t the intersection of the two columns is the appropriate catalog number. Pressure Series Female Medium Female High Female Ultra High Tube Size in. Female onnection onnection Maximum Pressure psi (bar)* Female onnection Female 21,000 psi (1,500 bar) 1 / 4 4MF 3 / 8 6MF 9 / 16 9MF 3 / 4 12MF 1 16MF 1 / 4 4MF 21,000 (1,500) 21F4M 21F4M6M 21F4M9M 21F4M12M 21F4M16M 3 / 8 6MF 21,000 (1,500) 21F6M 21F6M9M 21F6M12M 21F6M16M 9 / 16 9MF 21,000 (1,500) 21F9M 21F9M12M 21F9M16M 3 / 4 12MF 21,000 (1,500) 21F12M 21F12M16M 1 16MF 21,000 (1,500) 21F16M 1 / 4 4HF 65,000 (4,500) 3 / 8 6HF 65,000 (4,500) 9 / 16 9HF 65,000 (4,500) 5 / 16 5UF 152,000 (10,500) * The pressure rating of any adapter is the value of the lowest rated connection in the fitting. Ultra 5 dapters (male to male) MXIMTOR male to male adapters allow the joining of two different sizes and/or types of tube or pipe female connections. 6 Pressure Series Male Medium Male High Male Ultra High Tube Size in. Male onnection onnection Maximum Pressure psi (bar)* S 09/2007 Male onnection Male 21,000 psi (1,500 bar) 1 / 4 4MM 3 / 8 6MM 9 / 16 9MM 3 / 4 12MM 1 16MM 1 / 4 4MM 21,000 (1,500) 21M4M 21M4M6M 21M4M9M 21M4M12M 21M4M16M 3 / 8 6MM 21,000 (1,500) 21M6M 21M6M9M 21M6M12M 21M6M16M 9 / 16 9MM 21,000 (1,500) 21M9M 21M9M12M 21M9M16M 3 / 4 12MM 21,000 (1,500) 21M12M 21M12M16M 1 16MM 21,000 (1,500) 21M16M 1/ 4 4HM 65,000 (4,500) 3 / 8 6HM 65,000 (4,500) 9 / 16 9HM 65,000 (4,500) 5 / 16 5UM 152,000 (10,500) * The pressure rating of any adapter is the value of the lowest rated connection in the fitting.

53 and dapters Female 65,000 psi (4,500 bar) Female Ultra 152,000 psi (10,500 bar) Female onnection Female Pipe 15,200 psi (1,050 bar) Female ritish Standard Pipe 15,200 psi (1,050 bar) 1 / 4 4HF 3 / 8 6HF 9 / 16 9HF 5 / 16 5UF 1 / 8 FNPT 1 / 4 FNPT 3 / 8 FNPT 1 / 2 FNPT 3 / 4 FNPT 1 FNPT 1 / 8 FSP 1 / 4 FSP 3 / 8 FSP 1 / 2 FSP 3 / 4 FSP 1 FSP 21F4M4H 21F4M6H 21F4M9H 21F4M5U 15F4M2P 15F4M4P 15F4M6P 15F4M8P 15F4M12P 15F4M16P 15F4M2 15F4M4 15F4M6 15F4M8 15F4M12 15F4M16 21F6M4H 21F6M6H 21F6M9H 21F6M5U 15F6M2P 15F6M4P 15F6M6P 15F6M8P 15F6M12P 15F6M16P 15F6M2 15F6M4 15F6M6 15F6M8 15F6M12 15F6M16 21F9M4H 21F9M6H 21F9M9H 21F9M5U 15F9M2P 15F9M4P 15F9M6P 15F9M8P 15F9M12P 15F9M16P 15F9M2 15F9M4 15F9M6 15F9M8 15F9M12 15F9M16 21F12M4H 21F12M6H 21F12M9H 21F12M5U 15F12M2P 15F12M4P 15F12M6P 15F12M8P 15F12M12P 15F12M16P 15F12M2 15F12M4 15F12M6 15F12M8 15F12M12 15F12M16 21F16M4H 21F16M6H 21F16M9H 21F16M5U 15F16M2P 15F16M4P 15F16M6P 15F16M8P 15F16M12P 15F16M16P 15F16M2 15F16M4 15F16M6 15F16M8 15F16M12 15F16M16 65F4H 65F4H6H 65F4H9H 65F4H5U 15F4H2P 15F4H4P 15F4H6P 15F4H8P 15F4H12P 15F4H16P 15F4H2 15F4H4 15F4H6 15F4H8 15F4H12 15F4H16 65F6H 65F6H9H 65F6H5U 15F6H2P 15F6H4P 15F6H6P 15F6H8P 15F6H12P 15F6H16P 15F6H2 15F6H4 15F6H6 15F6H8 15F6H12 15F6H16 65F9H 65F9H5U 15F9H2P 15F9H4P 15F9H6P 15F9H8P 15F9H12P 15F9H16P 15F9H2 15F9H4 15F9H6 15F9H8 15F9H12 15F9H16 * The pressure rating of any adapter is the value of the lowest rated connection in the fitting. 152F5U 15F5U2P 15F5U4P 15F5U6P 15F5U8P 15F5U12P 15F5U16P 15F5U2 15F5U4 15F5U6 15F5U8 15F5U12 15F5U16 Ultra * The pressure rating of any adapter is the value of the lowest rated connection in the fitting S 09/2007 Male 65,000 psi (4,500 bar) Male Ultra 152,000 psi (10,500 bar) Male onnection Male Pipe 15,200 psi (1,050 bar) 7 Male ritish Standard Pipe 15,200 psi (1,050 bar) 1 / 4 4HM 3 / 8 6HM 9 / 16 9HM 5 / 16 5UM 1 / 8 MNPT 1 / 4 MNPT 3 / 8 MNPT 1 / 2 MNPT 3 / 4 MNPT 1 MNPT 1 / 8 MSP 1 / 4 MSP 3 / 8 MSP 1 / 2 MSP 3 / 4 MSP 1 MSP 21M4M4H 21M4M6H 21M4M9H 21M4M5U 15M4M2P 15M4M4P 15M4M6P 15M4M8P 15M4M12P 15M4M16P 15M4M2 15M4M4 15M4M6 15M4M8 15M4M12 15M4M16 21M6M4H 21M6M6H 21M6M9H 21M6M5U 15M6M2P 15M6M4P 15M6M6P 15M6M8P 15M6M12P 15M6M16P 15M6M2 15M6M4 15M6M6 15M6M8 15M6M12 15M6M16 21M9M4H 21M9M6H 21M9M9H 21M9M5U 15M9M2P 15M9M4P 15M9M6P 15M9M8P 15M9M12P 15M9M16P 15M9M2 15M9M4 15M9M6 15M9M8 15M9M12 15M9M16 21M12M4H 21M12M6H 21M12M9H 21M12M5U 15M12M2P 15M12M4P 15M12M6P 15M12M8P 15M12M12P 15M12M16P 15M12M2 15M12M4 15M12M6 15M12M8 15M12M12 15M12M16 21M16M4H 21M16M6H 21M16M9H 21M16M5U 15M16M2P 15M16M4P 15M16M6P 15M16M8P 15M16M12P 15M16M16P 15M16M2 15M16M4 15M16M6 15M16M8 15M16M12 15M16M16 65M4H 65M4H6H 65M4H9H 65M4H5U 15M4H2P 15M4H4P 15M4H6P 15M4H8P 15M4H12P 15M4H16P 15M4H2 15M4H4 15M4H6 15M4H8 15M4H12 15M4H16 65M6H 65M6H9H 65M6H5U 15M6H2P 15M6H4P 15M6H6P 15M6H8P 15M6H12P 15M6H16P 15M6H2 15M6H4 15M6H6 15M6H8 15M6H12 15M6H16 65M9H 65M9H5U 15M9H2P 15M9H4P 15M9H6P 15M9H8P 15M9H12P 15M9H16P 15M9H2 15M9H4 15M9H6 15M9H8 15M9H12 15M9H16 152M5U 15M5U2P 15M5U4P 15M5U6P 15M5U8P 15M5U12P 15M5U16P 15M5U2 15M5U4 15M5U6 15M5U8 15M5U12 15M5U16 8

54 Ultra S 09/2007

55 MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by one of the best service organizations in the industry. Valves feature: u pressure gauges up to max. 101,000 psi (7,000 bar) u robust and safe pressure transducers up to max. 116,000 psi (8,000 bar) u comprehansive range of HP hoses for max. 58,000 psi (4,000 bar) Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. ccessories Pressure gauges, transducers and high pressure hoses High Index Pressure links Index Gauges rated to 101,000 psi (7,000 bar) Transducers rated to 116,000 Transducers psi (8,000 rated to bar).2 116,000 psi (8,000 bar) onnections High onnections pressure. hoses..... rated..... to ,000 psi (4,000 bar) High pressure hoses rated to 58,000 psi (4,000 bar) Ultra Factory MXIMTOR GmbH Walkenrieder Str. 15 Telephon: / Zorge / Germany Facsimile: / Internet info@maximator.de S 09/2007 1

56 Pressure gauges and transducers MXIMTOR provides pressure gauges up to max. 101,000 psi (7,000 bar). Their connections are adjusted to the MXIMTOR high pressure program (cf. the table below). ll pressure gauges are liquid damped and conform to accuracy class 1.0. Pressure range bar (psi) atalog Number onnection iameter ccuracy class 0 1,000 bar (0 14,500 psi) /2 SP 3.9 (100) ,000 bar (0 14,500 psi) /2 SP 6.3 (160) ,600 bar (0 23,200 psi) /2 SP 3.9 (100) ,600 bar (0 23,200 psi) /2 SP 6.3 (160) ,500 bar (0 36,000 psi) /2 SP 3.9 (100) ,500 bar (0 36,000 psi) /2 SP 6.3 (160) ,000 bar (0 58,000 psi) H (9/16-18 UNF) 6.3 (160) ,000 bar (0 87,000 psi) U (5/8-18 UNF) 6.3 (160) ,000 bar (0 101,000 psi) U (5/8-18 UNF) 6.3 (160) 1.0 Gauges with different pressure ranges, diameters and accuracy classes upon request. Ultra MXIMTOR supplies robust and safe pressure transducers up to max. 116,000 psi (8,000 bar). Main featres of the transducers are their high accuracy and good longevity. Their connections are adjusted to the MXIMTOR HP system. Output 0 to 10 V. 2 Pressure range psi (bar) atalog Number onnection S 09/2007 Temperature ccuracy class 36,000 (2,500) H (9/16-18 UNF) -4 F to 170 F (-20 to 80 ) ,000 (4,000) H (9/16-18 UNF) -4 F to 170 F (-20 to 80 ) ,000 (8,000) U (5/8-18 UNF) -4 F to 170 F (-20 to 80 ) 0.5

57 onnection SP Female with copper gasket onnections 58 onnection H-LH Gauge connection onnection SW opper gasket Typ atalog Number onnection H-LH onnection SW 214M4G M (1/4-28-UNF-LH) 1/4 SP M8G M (1/4-28-UNF-LH) 1/2 SP M8G M (3/8-24UNF-LH) 1/2 SP M8G M (9/16-18UNF-LH) 1/2 SP M8G M (3/4-16UNF-LH) 1/2 SP M8G M (1-14UNF-LH) 1/2 SP H8G H (1/4-28UNF-LH) 1/2 SP H8G H (3/8-24UNF-LH) 1/2 SP H8G H (9/16-18UNF-LH) 1/2 SP 36 NPT connections see adapters onnection SP Female with copper gasket Ultra S 09/2007 Typ atalog Number onnection H-LH onnection SW Pressure psi (bar) 21F4M4G M (7/16-20UNF) 1/4 SP 27 21,000 (1,500) 21F4M8G M (7/16-20UNF) 1/2 SP 36 21,000 (1,500) 21F6M4G M (9/16-18UNF) 1/4 SP 36 21,000 (1,500) 21F6M8G M (9/16-18UNF) 1/2 SP 36 21,000 (1,500) 21F4H4G H (9/16-18UNF) 1/4 SP 36 36,000 (2,500) 21F4H8G H (9/16-18UNF) 1/2 SP 36 36,000 (2,500) NPT connections see adapters 3

58 High pressure hoses MXIMTOR provides a comprehensive range of HP hoses in high-quality thermoplastic synthetic materials. Pressure substrates are of steel and compatible materials. These flexible connections are suited for max. operating pressures of 58,000 psi (4,000 bar). Upon request, MXIMTOR also supplies HP hoses with glands and collars to make them fit for integration into a 65,000 psi (4,500 bar) high pressure system. The bending radius must not exceed 12,6 in. (320 mm). 4 Pressure range psi (bar) atalog Number onnection 9/16-18 UNF S 09/2007 iameter outside inside Length in (mm) 14,000 (1,000) KR 1/4 Union Nut SK2005St (9.4) 0.20 (5) 39 (1000) 14,000 (1,000) KR 1/4 Union Nut SK2005St (9.4) 0.20 (5) 79 (2000) 14,000 (1,000) KR 1/4 Union Nut SK2005St (9.4) 0.20 (5) 118 (3000) 26,000 (1,800) KR 1/4 Union Nut SK4005St 0.44 (11.2) 0.20 (5) 39 (1000) 26,000 (1,800) KR 1/4 Union Nut SK4005St 0.44 (11.2) 0.20 (5) 79 (2000) 26,000 (1,800) KR 1/4 Union Nut SK4005St 0.44 (11.2) 0.20 (5) 118 (3000) 26,000 (1,800) /4-28UNF-LH SK4005St 0.44 (11.2) 0.20 (5) 39 (1000) 26,000 (1,800) /4-28UNF-LH SK4005St 0.44 (11.2) 0.20 (5) 79 (2000) 26,000 (1,800) /4-28UNF-LH SK4005St 0.44 (11.2) 0.20 (5) 118 (3000) 36,000 (2,500) KR 1/4 Union Nut SK6005St 0.53 (13.4) 0.20 (5) 39 (1000) 36,000 (2,500) KR 1/4 Union Nut SK6005St 0.53 (13.4) 0.20 (5) 79 (2000) 36,000 (2,500) KR 1/4 Union Nut SK6005St 0.53 (13.4) 0.20 (5) 118 (3000) 36,000 (2,500) /4-28UNF-LH SK6005St 0.53 (13.4) 0.20 (5) 39 (1000) 36,000 (2,500) /4-28UNF-LH SK6005St 0.53 (13.4) 0.20 (5) 79 (2000) 36,000 (2,500) /4-28UNF-LH SK6005St 0.53 (13.4) 0.20 (5) 118 (3000) 58,000 (4,000) /8-24UNF-LH SK8005St 0.55 (14.0) 0.18 (4.6) 39 (1000) 58,000 (4,000) /8-24UNF-LH SK8005St 0.55 (14.0) 0.18 (4.6) 79 (2000) 58,000 (4,000) /8-24UNF-LH SK8005St 0.55 (14.0) 0.18 (4.6) 118 (3000) 58,000 (4,000) /16-18UNF-LH SK8005St 0.55 (14.0) 0.18 (4.6) 39 (1000) 58,000 (4,000) /16-18UNF-LH SK8005St 0.55 (14.0) 0.18 (4.6) 79 (2000) 58,000 (4,000) /16-18UNF-LH SK8005St 0.55 (14.0) 0.18 (4.6) 118 (3000) Hoses for other operating pressures and nominal widths as well connection combinations can be supplied upon request. 3/8-24 UNF 1/4-28 UNF KR 1/4 Ultra

59 L E Radius F.09" ia. Weep Hole MXIMTOR offers manual oning and Threading tools that are designed to prepare accurate tubing ends to accept the medium, high and ultra high pressure connections. Tools & feature: u Manual oning and Threading oning tools are designed to thread up to 9/16 O tubing. u One size oning and Threading tool with interchangeable bushings and thread dies eliminates multiple tool inventories. u Internal needle bearings and high strength materials offers ease of operation and extended tool life. u oning blades are designed to cut both the angle and straight areas to insure good concentricity between the sealing surfaces. u Precision Reseating Tools to repair damaged female high pressure connections without full disassembly of components. MXIMTOR offers a complete line of manual tools for the proper preparation of medium, high and ultra high pressure connections to 9/16 O tubing. For complete coning and threading instructions see MXIMTOR s website at Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. Factory MXIMTOR GmbH Walkenrieder Str. 15 Telephon: / Zorge / Germany Facsimile: / Internet info@maximator.de S 09/2007 Tools & Tools Index & links Index oning and Threading Tools Reseating and eburr Tools..3 Reseating and eburr Tools Tube onnection etails ssembly Tube onnection Instructions etails Tubing ssembly Minimum Instructions end. Radius..... & Valve Torque Values...6 Tubing Minimum end Radius & Valve Torque Values Ultra

60 Tools & oning and Threading Tools Tubing Size O.. x I.. Tubing Pressure psi R.T. onnection MXIMTOR offers tools for coning and threading tubing up to 9/16" O.. These are precise tools that allow manual coning and threading of medium, high, and ultra high pressure tubing. Please refer to the Maxpro Technologies website, and click on the VFT button to find detailed instructions for the coning and threading process. oning Tools The coning tool comes complete with blades, collet and tools. The blades and tool feed nut allow the user to control the cutting feed rate and face the end of the tube when complete. The blades and collet can be changed for other sizes, while using the same base tool. oning Tool omplete atalog Number Replacement Part ollet Part Number oning lades Part Number 1/4 x.109 (6.35 x 2.77) 21,000 (1,500) 4MM T4M /8 x.203 (9.53 x 5.17) 21,000 (1,500) 6MM T6M /16 x.312 (14.29 x 7.93) 21,000 (1,500) 9MM T9M /16 x.359 (14.29 x 9.13) 15,200 (1,050) 9MM T9M /4 x.083 (6.35 x 2.11) 65,000 (4,500) 4HM T4H /8 x.125 (9.53 x 3.17) 65,000 (4,500) 6HM T6H /16 x.188 (14.29 x 4.77) 65,000 (4,500) 9HM T9H /16 x.062 (7.94 x 1.58) 152,000 (10,500) 5UM T5U Ultra 2 Tubing Size O.. x I.. Tubing Pressure psi R.T. onnection Left Hand Thread Size (UNF class 2) 1/4 x.109 (6.35 x 2.77) 21,000 (1,500) 4MM 1/4-28 TT /8 x.203 (9.53 x 5.17) 21,000 (1,500) 6MM 3/8-24 TT /16 x.312 (14.29 x 7.93) 21,000 (1,500) 9MM 9/16-18 TT /16 x.359 (14.29 x 9.13) 15,200 (1,050) 9MM 9/16-18 TT /4 x.083 (6.35 x 2.11) 65,000 (4,500) 4HM 1/4-28 TT /8 x.125 (9.53 x 3.17) 65,000 (4,500) 6HM 3/8-24 TT /16 x.188 (14.29 x 4.77) 65,000 (4,500) 9HM 9/16-18 TT /16 x.062 (7.94 x 1.58) 152,000 (10,500) 5UM 5/16-24 TT S 09/2007 Threading Tools The threading tool comes complete with the threading die and bushing. The thread is a left hand type. The thread die and bushing can be changed for other sizes, while using the same base tool. Threading Tool omplete atalog Number Replacement Part ie Part Number ushing Part Number

61 Tools & Reseating and eburr tools Tubing Size O.. x I.. 1/4 x.109 (6.35 x 2.77) 21,000 (1,500) 4MF RT4M n/a /8 x.203 (9.53 x 5.17) 21,000 (1,500) 6MF RT6M n/a /16 x.312 (14.29 x 7.93) 21,000 (1,500) 9MF RT9M n/a /16 x.359 (14.29 x 9.13) 15,200 (1,050) 9MF RT9M n/a /4 x.083 (6.35 x 2.11) 65,000 (4,500) 4HF RT4H /8 x.125 (9.53 x 3.17) 65,000 (4,500) 6HF RT6H /16 x.188 (14.29 x 4.77) 65,000 (4,500) 9HF RT9H /16 x.062 (7.94 x 1.58) 152,000 (10,500) 5UF RT5U n/a Tubing Size O.. x I S 09/2007 Tubing Pressure psi R.T. Tubing Pressure psi R.T. onnection Reseating Tools The reseating tool is designed to rework an existing damaged coned and threaded connection without full disassembly of the component. The reseating tool will resurface the sealing surfaces of the medium, high, and ultra high pressure connections up to 9/16 tubing. Reseating Tool omplete atalog Number utter Part Number Replacement Part ushing Part Number Gland Part Number eburring Tools The deburring tool is designed to remove the metal burr on the inside diameter of the tubing after the cutting process. The reseating tool will work on all medium, high, and ultra high pressure connections up to 9/16 tubing. onnection eburring Tool omplete atalog Number Replacement Part ushing Part Number 1/4 x.109 (6.35 x 2.77) 21,000 (1,500) 4MM T /8 x.203 (9.53 x 5.17) 21,000 (1,500) 6MM T /16 x.312 (14.29 x 7.93) 21,000 (1,500) 9MM T /16 x.359 (14.29 x 9.13) 15,200 (1,050) 9MM T /4 x.083 (6.35 x 2.11) 65,000 (4,500) 4HM T /8 x.125 (9.53 x 3.17) 65,000 (4,500) 6HM T /16 x.188 (14.29 x 4.77) 65,000 (4,500) 9HM T /16 x.062 (7.94 x 1.58) 152,000 (10,500) 5UM T Ultra

62 Tools & Tube onnection etails Female onnection Radius L 4 59 Tubing Size O.. x I. in. (mm) Tubing Pressure psi R.T 1/4 x.109 (6.35 x 2.77) 21,000 (1,500) 3/8 x ,000 (9.53 x 5.17) (1,500) 9/16 x ,000 (14.29 x 7.93) (1,500) 9/16 x ,200 (14.29 x 9.13) (1,050) 3/4 x ,000 (19.05 x 11.12) (1,500) 3/4 x ,200 (19.05 x 13.1) (1,050) 1 x ,000 (25.4 x 14.27) (1,500) 1 x ,200 (25.4 x 17.47) (1,050) 1/4 x.083 (6.35 x 2.11) 3/8 x.125 (9.53 x 3.17) ,000 (4,500) 65,000 (4,500) 9/16 x ,000 (14.29 x 4.77) (4,500) Ultra 5/16 x ,000 (7.95 x 1.58) (10,500) (3.6) (6.4) (10.3) (11.1) (14.3) (14.7) (18.3) (20.6) (7.1) imension L (8.7) (11.1) (12.7) (12.7) (15.9) (15.9) (19.8) (19.8) (14.3) (19.1) (23.8) (17.4) Left Hand Thread ** Male onn. Female onn. 1/4-28 4MM 4MF 7/ /8-24 6MM 6MF 9/ / / /4-16 3/ * Port diameters may vary depending on specific valve or fitting component type. See actual component catalog page for orifice sizes and pressure ratings. ** Unified National Fine thread, lass 2. ll dimensions are for references only and are subject to change. 9MM 9MF 13/ MM 12MF S 09/2007 imension ** E F* 3/4-14 NPS 16MM 16MF 1-3/8-12 1/4-28 4HM 4HF 9/ /8-24 6HM 6HF 3/4-16 9/ HM 9HF 1-1/8-12 5/ UM 5UF 5/ (4.7) 0.31 (7.7) 0.50 (12.7) 0.62 (15.7) 0.88 (22.4) 0.17 (4.2) 0.26 (6.5) 0.38 (9.7) 0.25 (6.2) (7) 0.38 (9.6) 0.44 (11.2) 0.50 (12.7) 0.81 (20.6) 0.39 (10) 0.53 (13.5) 0.62 (15.7) 0.63 (16) E 0.50 (12.7) 0.59 (15.1) 0.72 (18.3) 1.06 (27) 0.39 (10) 0.53 (13.5) 0.62 (15.7) 0.93 (23.5) 0.51 (13) 0.62 (15.7) 0.75 (19.1) 0.94 (23.9) 1.31 (33.3) 0.45 (11.5) 0.63 (16) 0.75 (19.1) 1.06 (27) (2.7) (5.1) (7.8) (9.1) (11.1) (13.1) (14.3) (17.5) (2.3) (3) (4.8) 0.09 (2.3) F.09" ia. Weep Hole Tubing Engagement llowance 0.55 (14) 0.69 (17.5) 0.84 (21.3) 0.83 (21.1) 1.00 (25.4) 0.99 (25.1) 1.44 (36.6) 1.38 (35.1) 0.50 (12.7) 0.69 (17.5) 0.84 (21.3) 1.25 (31.75) Ultra

63 Torque Values S 09/2007 Tools & onnection ssembly Instructions ssembly of Standard oned & Threaded onnections ssembly Instructions: Tube 1. Insert the gland onto the tubing. Thread the left handed collar onto the tube until at least one or two threads are Gland exposed from the tapered coned end. 2. pply a compatible lubricant to the gland threads and the back side of the collar where it comes in contact with the gland. lso lubricate the tapered cone portion of the tube. This will help protect the sealing surfaces from galling during the assembly process. ollar 3. Insert the tubing into the connection and tighten the assembly hand tight. Then use a torque wrench to tighten the connection to the appropriate value in the table below. It is good practice to use an additional wrench to preventthe opposite connection from turning. ssembly of nti-vibration ollet Gland onnections ollet Gland ollet ody Tubing Size O.. x I.. Tube ollet ollar Tubing Pressure psi R.T. Gland onnection ssembly Instructions 1. The nti-vibration ollet Gland ssembly can be installed using the same procedure as the standard coned and threaded connection. (see above steps 1 through 3) The high pressure collet grips the tube when the connection gland is tightened. 2. When using the nti-vibration ollet ssembly, the procedure is the same as that of the standard coned and threaded connection (see above steps 1 through 3) with the additional step below. 3. Once the ollet ody has been tightened to the approriate torque value in the table below, the ollet Gland can be turned 1-1/4 turns past hand tight. This will compress the collet against the tube. fter the initial compression of the collet, any additional retightening would only require 3/4 of a turn past hand tight. Tube Gland Hex Size Required Torque ft-lbs. (Nm) 1/4 x.109 (6.35 x 2.77) 21,000 (1,500) 4M 1/2 (12.7) 20 (30) 3/8 x.203 (9.53 x 5.17) 21,000 (1,500) 6M 5/8 (15.9) 30 (40) 9/16 x.312 (14.29 x 7.93) 21,000 (1,500) 9M 15/16 (23.8) 55 (75) 9/16 x.359 (14.29 x 9.13) 15,200 (1,050) 9M 15/16 (23.8) 55 (75) 3/4 x.438 (19.05 x 11.12) 21,000 (1,500) 12M 1-3/16 (30.2) 90 (120) 3/4 x.516 (19.05 x 13.1) 15,200 (1,050) 12M 1-3/16 (30.2) 90 (120) 1 x.562 (25.4 x 14.27) 21,000 (1,500) 16M 1-3/8 (34.9) 150 (200) 1 x.688 (25.4 x 17.47) 15,200 (1,050) 16M 1-3/8 (34.9) 150 (200) 1/4 x.083 (6.35 x 2.11) 65,000 (4,500) 4H 5/8 (15.9) 25 (35) 3/8 x.125 (9.53 x 3.17) 65,000 (4,500) 6H 13/16 (20.6) 50 (70) 9/16 x.188 (14.29 x 4.77) 65,000 (4,500) 9H 1-3/16 (30.2) 110 (150) 5/16 x.062 (7.94 x 1.58) 152,000 (10,500) 5U 3/4 (19.05) 70 (95) ll dimensions are for references only and are subject to change. 5 Ultra

64 Tools & Tubing Minimum end Radius & Valve Torque Values Minimum end Radius for 316SS & 304SS Tubing Tubing Size O.. x I.. Tubing Pressure psi R.T. Recommended Minimum end Radius 1/4 x.109 (6.35 x 2.77) 21,000 (1,500) 1.25 (31.8) 3/8 x.203 (9.53 x 5.17) 21,000 (1,500) 1.75 (44.5) 9/16 x.312 (14.29 x 7.93) 21,000 (1,500) 2.63 (66.8) 9/16 x.359 (14.29 x 9.13) 15,200 (1,050) 2.63 (66.8) 3/4 x.438 (19.05 x 11.12) 21,000 (1,500) 3.50 (88.9) 3/4 x.516 (19.05 x 13.1) 15,200 (1,050) 3.50 (88.9) 1 x.562 (25.4 x 14.27) 21,000 (1,500) 4.63 (117.6) 1 x.688 (25.4 x 17.47) 15,200 (1,050) 4.63 (117.6) 1/4 x.083 (6.35 x 2.11) 65,000 (4,500) 1.25 (31.8) 3/8 x.125 (9.53 x 3.17) 65,000 (4,500) 1.75 (44.5) 9/16 x.188 (14.29 x 4.77) 65,000 (4,500) 2.63 (66.8) 5/16 x.062 (7.94 x 1.58) 152,000 (10,500) 6.00 (152.4) ll dimensions are for references only and are subject to change. Needle Valve Torque Values Minimum end Radius Ultra Valve Series Tubing Size Packing Gland Hex Size Packing Gland Torque ft.-lbs. (Nm) Running Torque in.-lbs. (Nm) Seating Torque in.-lbs. (Nm) 6 21,000 RT 21V 36,000 RT 36V 65,000 RT 65V Ultra 101,000 RT 101V 1/4 (6.35) 5/8 (15.9) 30 (40) 40 (4.5) 55 (6.2) 3/8 (9.53) 5/8 (15.9) 30 (40) 40 (4.5) 55 (6.2) 9/16 (14.29) 13/16 (20.6) 60 (80) 60 (6.8) 90 (10.2) 3/4 (19.05) 15/16 (23.8) 3/4 turn 300 (33.9) 360 (40.7) 1 (25.4) 1 3/8 (34.9) 3/4 turn 360 (40.7) 600 (67.8) 1/4 (6.35) 3/8 (9.53) 9/16 (14.29) 1/4 (6.35) 3/8 (9.53) 9/16 (14.29) ll dimensions are for references only and are subject to change. 13/16 (20.6) 45 (60) (6.8) 13/16 (20.6) 40 (55) 65 (7.3) 75 (8.5) 5/16 (7.94) 15/16 (23.8) 60 (80) 100 (11.3) 120 (13.6) S 09/2007

65 ERTIFIE ISO-9001:2000 % of Rated 72 F Temperature ( F) MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability. Their work is based on a certified quality management system (IN EN ISO 9001:2000) - the fundamental asset for successfully implementing technical knowledge and experience in the field of complex systems. Product features: u Maximator s Quality Management System meets all requirements of IN EN ISO 9001:2000, TÜV ertification to u ll valves, fittings and tubing are designed in accordance with the European Pressure Equipment irective 97/23/E. u Pressure vs. Temperature chart for 316 cold worked stainless steel. MXIMTOR GmbH is the exclusive European distributor for Maximator products. t Maximator our industry experience is unparalleled. Whether General Industrial, Oil & Gas, Water Jet, hemical or Petrochemical applications, our teams of experienced engineers and highly trained professionals have worked in the high pressure industry for decades and are prepared to support your needs. Our guiding principles are safety, quality, and dependability. Our comprehensive inventory will ensure quick delivery that is unmatched in today s environment. Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. Factory MXIMTOR GmbH Walkenrieder Str. 15 Telephon: / Zorge / Germany Facsimile: / Internet info@maximator.de S 09/2007 Index Pressure vs. Temperature chart TÜV ertificate.3 TÜV ertificate Ultra