Hydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series
|
|
- Rosalyn Barnett
- 6 years ago
- Views:
Transcription
1 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic ower Units D, H, V-ak and V-ak Low rofile Series HY CD/US Effective: July 01, 2012
2 WRNING - USER RESONSIILIY FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS DESCRIED HEREIN OR RELED IEMS CN CUSE DEH, ERSONL INJURY ND ROERY DMGE. his document and other information from arker-hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. he user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. he user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from arker or its subsidiaries or authorized distributors. o the extent that arker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. OFFER OF SLE he items described in this document are hereby offered for sale by arker-hannifin Corporation, its subsidiaries or its authorized distributor. his offer and its acceptance are governed by the provisions stated in the detailed "Offer of Sale" elsewhere in this document. Copyright 2012, arker Hannifin Corporation. ll Rights Reserved.
3 HY CD/US Introduction Hydraulic ower Units D, H and V-ak Series Quick Reference Data Chart ump Flow Electrical ump ank Size LM (GM) Motors Maximum* Model No. Liters 1725 RM KW (H) ar (SI) D -aks 18.9 (5) ( ) 0.37 (0.5) (3) 207 (3000) H-aks 37.9 (10), 75.7 (20), (30), (40) ( ) 0.37 (0.5) (20) 207 (3000) V-aks 37.9 (10), 75.7 (20), (30), (40) ( ) 1.5 (2) (20) 207 (3000) V (80) ( ) (7 1/2-40) 207 (3000) * See pump/motor combination, maximum pressure charts. 2 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US
4 HY CD/US echnical Information Hydraulic ower Units D, H and V-ak Series Warranty Installation Data: Standard Features enefits Schematic Symbol O OION MNIFOLD O OION MNIFOLD SE -12 M SRE REURN D & H-K SIC UNI NO OIONS OR CCESSORIES O OION MNIFOLD SE -12 M OMI OION COM CONROL SRE REURN V-K SIC UNI NO OIONS OR CCESSORIES OMI OION UM COMENSOR O OION MNIFOLD arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 3
5 HY CD/US H-aks Ordering Information Hydraulic ower Units H-aks W Reservoir ressure ump Flow No Motor (See Note) ** Electric Motor Manifold H1* 10 (37.9) H2 20 (75.7) H3 30 (113.6) H4 40 (151.4) Omit J Reservoir Size Gallons (Liters) *vailable up to 7.5 KW (10 H) motor only. ressure * System ressure Relief Valve Only System ressure Relief Valve with Unloading Valve (2-Way 120VC) N.O. (Energize coil to close) System ressure Relief Valve with Unloading Valve (2-Way 24VDC) N.O. (Energize coil to close) ump Flow Used Electric Motor Description H (KW) - RM - Frame - hase U1*.5 (.37) C (.75) C (.75) C - 3 G 2 (1.5) C - 3 K 3 (2.2) C - 3 L 5 (37.5) C - 3 M 7.5 (5.6) C - 3 N 10 (7.5) C (11.2) C - 3 S 20 (14.9) C - 3 * U1 leadtime is 2 weeks Single phase electric motors are rated as follows: 115/230V, 1H, EFC - 60 Hertz 1800 RM hree phase electric motors are rated as follows: /460V, 3H, EFC - 60 Hertz 1800 RM Consult factory for other motor speeds (RM) and voltages. vailable with H2, H3 and H4 tanks only. ** Use W prefix when no motor is required on unit. When ordering, W must be followed by motor model code equivalent to frame size of motor to be used. O S3 S5 M33 M35 M53 M55 orting lock/subplate or Manifold ype ressure and Return ort lock with Safety Relief Valve D03 Single Station Subplate with Safety Relief Valve D05 Single Station Subplate with Safety Relief Valve D03 Multistation arallel Circuit Manifold with Safety Relief Valve D05 Multistation arallel Circuit Manifold with Safety Relief Valve Supply/Return ort or ctuator ort Size & orts SE-10 Str. hr'd & orts SE-8 Str. hr'd & orts SE-10 Str. hr'd & orts SE-8 Str. hr'd & orts SE-8 Str. hr'd Other Convertible to S3 Option Spare & SE-10 orts Spare & SE-12 orts Spare G ort SE-6 Spare G ort SE-6 Manifolds are mounted vertically. ottom station is number 1. = Omit if not required 6 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US
6 HY CD/US H-aks Ordering Information Hydraulic ower Units H-aks Directional Valve *Manapak Valves Options and ccessories Valve Model Number Function Flow Flow ilot Operator Check ilot Operator Check NF Mounting ad Valve Model Number Nominal Flow GM (LM) D1VW001CN*** D03 7 (26.5) C D1VW004CN*** D03 7 (26.5) F D3W1CN** D05 20 (75.7) G D3W4CN** D05 15 (56.8) D1VW008CN*** D03 7 (26.5) W D3W8CN** D05 15 (56.8) NF Mounting ad FM2DDKN D03 7 (26.5) Nominal Flow GM (LM) FM3DDKN D05 12 (45.4) COM2DDN D03 7 (26.5) COM3DDN D05 12 (45.4) *Manapak valves mounted in order of callout. First valve will be nearest DCV; last valve will be on manifold. Description Units less valves wil be supplied with station cover plates installed. Circuit Symbol Circuit Symbol Function Model Number echnical Data 1* 2* Return Heat Exchanger Return Heat Exchanger RM RM H ressure Filter 15110QRS K L O R1 R2 Check Valve ump Outlet ypass Check (on Heat Exch) Return Filter Combination Float/emp. Switch N.O. Float Up Combination Float/emp. Switch Float Up "D" & "C" Series C1220S65 ir/oil:.7 H (0.52 kw), 7 GM (26.5 LM) kw Motors only ir/oil: 1.5 H (1.1 kw), 7 GM (26.5 LM) kw Motors only Microglass II Element, Vis. Ind SI (3.49 bar) ypass - 4 SI (0.27 bar), 7 GM (26.5 LM) 5 SI (0.34 bar) Cracking ressure 25 SI (1.72 bar) 15 GM (56.8 LM) (65 SI) 4.5 bar Cracking ressure 1210C Cellulose Element, 12 GM (45 LM) Ind. Gage - 15 SI (1.03 bar) ypass Fixed emp at 65 C (149 F) Low Level and/or 65 C (149 F) (N.O.) Fixed emp at 65 C (149 F) Low Level and/or 65 C (149 F) (N.C.) *Heat rejection based on flow given with a 40 F differential between transfer medium. = Omit if not required arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 7
7 HY CD/US Installation Information Hydraulic ower Units Series D, H, V-acks Dimensions - asic H2, 3, 4 & V2, 3, 4 (20, 30, 40 Gallon ank) Inch equivalents for millimeter dimensions are shown in (**) (22.5) (21.0) (20.0) Filter Option Reference SRE REURN OR 3/4" NF WIH DRO IE OU 38.1 (1.5).56 DI. MOUNING HOLES - 4 LCES IN (20.0) (17.0) SRE REURN OR 3/4" NF WIH DRO IE ELECRIC MOOR UM REFILL OR FOR V-KS (8-15 GM ONLY) 22.9 (.9) O & S5 OION MNIFOLD ( & LOCK & D05 SINGLE SION) SIC UNI SYSEM RELIEF VLVE FOR H-KS SFEY RELIEF VLVE FOR V-KS UM COMENSOR CONROL FOR V-KS (NO INCLUDED ON H-KS) ROION RROW O & S5 OION MNIFOLD ( & LOCK & D05 SINGLE SION) SHOWN WIH OION N REURN FILER RESSURE GGE WIH NEEDLE VLVE * O ( & LOCK) OR S5 ( D05 SULE) SHOWN-SEE MNIFOLD OIONS -D03 -D05 -D03 -D05 FILLER REHER -D03 -D05 -D03 -D05 LIF EYES - 2 LCES OIL LEVEL SIGH GGE SRE REURN OR 3/4" NF WIH DRO IE OU C NK DRIN SE-12 (LUGGED) IN 38.1 (1.5) (19.5) 3.1 (.12) Motor Motor Description Dimension KW(H)-RM-Frame-hase * U1.37(.5) C (10.50) (.75) C1.56(.75) C (11.00) (.75) 1.75(1) C (11.75).75 (19.05) 3.75(1) C (10.50) (.75) F 1.1(1.5) C (10.75) (.75) G 1.5(2) C (11.75) (.75) K 2.2(3) C (12.62) (.75) L 3.7(5) C (14.38) (1.13) M 5.6(7.5) C (16.00) (1.38) N 7.5(10) C (16.28) (1.38) 11.2(15) C (17.63) (3.35) S 14.9(20) C (19.3) (3.35) * Reference dimension consult factory if critical to application. Reservoir Reservoir Dimension Size C H2 or V2 H3 or V3 H4 or V Liters (20 Gal) (19.36) Liters (30 Gal) (23.62) 75.7 Liters (40 Gal) (28.86) M5* OION MNIFOLD (MULI-SION D05 MNIFOLD) SHOWN WIH OION N REURN FILER G 12 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US
8 HY CD/US echnical Information Hydraulic ower Units Series D, H, V-acks Manifold Options Inch equivalents for millimeter dimensions are shown in (**). SULY OR SE-10 REURN OR SE-10 SULY OR SE-10 REURN OR SE-10 REURN OR SE-10 D03 COVER LE OR SE-8 OR SE (3.44) 52.3 (2.06) REURN OR SE-10 D03 MNG SURFCE OR SE-8 OR SE (1.25) UM SULY 44.2 (1.75) UM SULY 85.9 (3.38) 47.8 (1.88) 22.0 (.87) 44.5 (1.75) O MNIFOLD OION FOR SULY & REURN CONNECIONS (18.9 LIER (5 GL.) RESERVOIR UNIS) S3 SULE OION FOR USE WIH D1VW VLVE (NF D03) SULY OR SE-12 REURN OR SE-12 SULY OR SE-12 REURN OR SE-12 REURN OR SE-12 REURN OR SE-12 UM SULY D05 COVER LE OR SE-10 OR SE (1.75) 53.8 (2.12) 44.5 (1.75) REURN OR SE-12 REURN OR SE-12 UM SULY D05 MNG SURFCE OR SE-10 OR SE (1.25) (4.12) -D03 -D05 -D03 -D (1.50) -D03 -D05 -D03 -D (.69) 53.8 (2.12) O MNIFOLD OION FOR SULY & REURN CONNECIONS (37.9, 75.7, 113.6, LI (10, 20, 30, 40 GL) RESERVOIR UNIS) S5 SULE OION FOR USE WIH D3W VLVE (NF D05) arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 13
Hydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series. HY CD/US Effective: July 01,
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic ower Units D, H, V-ak and V-ak Low rofile Series HY28-2661-CD/US
More informationHydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series. HY CD/US Effective: Mar 31,
Hydraulic ower Units D, H, V-ak and V-ak Low rofile Series HY28-2661-CD/US Effective: Mar 31, 2016 WRNING - USER RESONSIILIY FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS DESCRIED HEREIN OR RELED
More informationHydraulic Power Units
Catalog HY13-1552-001/N,EU Vertical ower Units Volume Control Hydraulic ower Units D, H and V-ak Series Catalog 2600-500-1/US 15 arker Hannifin Corporation Hydraulic ump/motor Division Greeneville, ennessee
More informationPower Units. H-Pak & V-Pak. V-Pak Low Profile. Performance Data
ower Units H-ak & V-ak H-ak and V-ak style power units are ideal for many industrial applications. These space saving vertical style units are available with gear or piston pumps and are designed for quiet
More informationHydraulic Power Units
Hydraulic ower Units D, H and V-ak Series Catalog 26-5-1/US Introduction Vertical ower Units Series D, H, V-aks Quick Reference Data Chart ump ank Size ump Flow Electrical Maximum * Model No. allon (Liters)
More informationPower Units. Page. (M) = Mobile (I) = Industrial (B) = Mobile & Industrial
Power Units Page (M) = Mobile (I) = Industrial () = Mobile & Industrial (I) 143-144 (I) 145-152 (I) 145-152 (I) 145-152 Power Units (Industrial) D-Pak 5 Gallon D-Pak style power units are ideal for many
More informationHydraulics 1. Directional Control Valves Series D1M. Features. Application. Operation. D1MW Solenoid Operated Free Lead Wire
ulletin 2544-1/US Introduction pplication arker D1M Series hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3 position styles. hey are
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or
More informationBankable Control Valves
Hydraulics ankable Control Valves Catalog 3123/US Catalog 3123/US Contents ankable Control Valves WRNING FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS ND/OR SYSEMS DESCRIED HEREIN OR RELED IEMS
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US Industrial Hydraulic Valves WRNING USER RESONSIILIY FILURE OR IMROER SELECION
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US Industrial Hydraulic Valves LH WRNING USER RESONSIILIY FILURE OR IMROER
More informationAuxiliary valves PLC series Direct-acting pressure relief valves
uxiliary valves LC series Direct-acting pressure relief valves Catalogue HY17-872/UK ugust 25 Catalogue HY17-872/UK Contents LC series List of contents age General Information... 3 LC53... Single housing
More informationDirectional Control Valves. Application. Features. Operation
Catalog HY14-2502/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More informationManapak Sandwich Valves. General Description
echnical Information Series RM General Description RM Series relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. With D3 size, they can also be configured
More informationDirectional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information Series D61VW General Series D61VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are
More informationDirectional Control Valves. Features. Application. Operation
Catalog HY14-2502/US Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage 4-way valves. hey are available in 2 or 3-
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information Series D101VW General Series D101VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold
More informationDirectional Control Valves. Application. Features. Operation
Catalog HY14-2500/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More informationDirectional Control Valves
echnical Information General Description he D1VW Series directional control valves are highperformance, 4-chamber, direct operated, wet armature solenoid controlled, 3 or 4-way valves. hey are available
More informationFlow Control Valves Check Valves Gauge Control Valves. Colorflow Valves
Check Valves Gauge Control Valves Colorflow Valves Colorflow and Ball Valves Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Ball Valves Fully guided poppets are used on
More informationDirectional Control Valves. Application. Features. Operation. D3W Solenoid Operated Conduit Cavity Style. D3W Solenoid Operated Hirschmann (DIN) Style
Catalog HY14-2500/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3-position. hey are manifold mounted which
More informationWARNING User Responsibility
WARNING User Responsibility FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other
More informationSandwich Valves Series CP
Technical Information General Description. pilot operated check valves are designed for maximum flow rates. The valves are typically used in combination with spool type directional control valves to ensure
More informationDirectional Control Valves. Application. Features. Operation.
Catalog HY14-2500/US Introduction pplication Series D101 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
More informationDirect Operated Proportional DC Valves
echnical Information Direct Operated roportional DC Valves Series D1F and D3F General Series D1F and D3F directional control valves of nominal sizes NG6 (CEO 3) and NG10 (CEO 5) respectively, provide variable
More informationOperation. D3W Solenoid Operated Conduit Box Style. D3W Solenoid Operated Hirschmann (DIN) Style
Catalog HY14-252/US Introduction pplication arker D3 Series hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3 position. hey are manifold mounted
More informationZE3 & ZE4 Electric 1 & 1 1/2 HP Pump Series
ZE3 & ZE4 Electric 1 & 1 1/2 H ump Hydraulic echnology Worldwide Shown from left to right: ZE334M-K, ZE411D-FHR he New Standard for Industrial pplications, Z-Class ll models in the chart below are the
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH SECION Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories echnical Information General Description Series D61VW directional control valves
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Catalog HY14-2500/US Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and
More informationMotors & Pumps- Hydraulic Pumps, Motors & Power Units
- Hydraulic umps, Motors & ower Units - Rapid Response...12-1 12-6 Hydraulic umps - Check Valves...12-7 Hydraulic umps - ower Units...12-8 12-9 12MOTORS & UMS Hydraulic umps - Vane ump...12-10 Motors...12-11
More informationHydraulic Pump VP1-120
REECHSROY GROUP REECHNOLOGY Bulgaria, Varna 9000 Industrial Zone Str. Studentska 1 U/UK1 odernization, complex repair and maintenance of heavy industrial equipment. Infrastructure construction and management
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D0H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol Drive
More informationDY Series 1-Piece Ball Valves. Catalog 1001C-A. July 2012 欧陆传动
DY Series 1-Piece Ball Valves Catalog 1001C-A July 2012 欧陆传动 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
More informationDirectional Control Valves
Frequently sked Questions Frequently sked Questions What is the function of a directional control valve? directional control valve is the extend and retract control for your hydraulic cylinders. It provides
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US echnical Information General Description Series D1VW directional control
More informationSuper Charged Piston Pumps Variable Displacement For Open Circuits. PAVC Medium Pressure
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding PAVC Medium Pressure Super Charged Piston Pumps Variable Displacement
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
Industrial Hydraulic Valves irectional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories Catalog HY14-25/US Industrial Hydraulic Valves WARNING USER RESPONSIBILITY FAILURE OR IMPROPER
More informationSuper Charged Piston Pumps Variable Displacement For Open Circuits. PAVC Medium Pressure
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding PAVC Medium Pressure Super Charged Piston Pumps Variable Displacement
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple
More informationBar 35 PSI 500. Pressure Drop L/M GPM. Flow
NF D3 O E R I N G N D E C H N I C L D RINGS Maximum Flow... See Chart Maximum Operating ressure (, and orts)... 3 ar ( SI) Maximum ank Line ressure... 13 ar (1 SI) Mounting attern... ISO 441--3-4-, NF-D3
More informationSECTION TITLE HEC2003/2004 SERIES SERVO VALVE SYSTEM ACCESSORIES KEY FEATURES
SECION ILE HEC2003/2004 SERIES SERVO VLVE SYSEM he HEC2003/2004 Series Servo System features a high response servo valve, a manifold mounted filter, and three different mechanical mounting options. he
More informationWARNING User Responsibility
WARNING User Responsibility FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other
More informationLOW PROFILE POWER UNITS 10 to 30 Gallon Reservoir Capacity L O W P R O F I L E P O W E R U N I T S
OW ROFI OWR UNIS to 30 Gallon Reservoir Capacity O W R O F I O W R U N I S 74 OW ROFI OWR UNIS to 30 Gallon Reservoir Capacity ow rofile ower Units are designed for use in locations where space is at a
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H03 5 gpm (19 L/min) nominal 10 000 psi (700 bar) H03 valves are rated for 5 gpm (19 L/min) nominal flow at pressures
More informationp max (see table of performances) Q max (see table of performances) MD1K MD1KD bar
41 510/107 ED EXLOSION-ROOF VERSION SOLENOID OERED DIRECIONL CONROL VLVES in compliance with EX 94/9/CE SERIES 21 MD1K-MD1KD ISO 4401-03 (CEO 03) E44K-E44KD CEO 05 E074K-E074KD ISO 4401-07 (CEO 07) E54K-
More informationColorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
More informationRA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.
R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional
More informationType : V20 Nominal Flow : 80 LPM Maximum Flow : 135 LPM (36 GPM) Max. Pressure : 350 Bar (5000 psi) Medium : Mineral Oil
ype : V20 Nominal Flow : 80 LM Maximum Flow : 135 LM (36 GM) Max. ressure : 350 ar (5000 psi) Medium : Mineral Oil Introduction: VELJN V20M Mobile directional control valve is a segment type design that
More information250 bar P max. Technical Features. Functional Description
Hydraulic ini ower ack S 5 Example: plastic tank version Q max 17 l/min p max 25 bar max 3 kw echnical Features C and DC electro-hydraulic unit, easy-to-assemble, compact odularity offers many combinations
More informationPart Number Spool Qty Max Flow Max Pressure Ports. 80 lpm
Monoblock Valves M5 Monoblock, 80 lpm, Max 315 ar art Number Spool Qty Max Flow Max ressure orts M5/1S3/18L/G4-6 ylinder 1 M5/2S3/18L/G4-6 ylinder 2 M5/3S3/18L/G4-6 ylinder 3 M5/4S3/18L/G4-6 ylinder 4
More informationDirectional control valves NG6...NG32 D03...D10 6
Directional control valves NG6...NG32 D03...D10 6 DIRECIONL CONROL VLVES 1 Index DO3 (NG6) age 2 to 22 D05 (NG10) age 23 to 42 D07 (NG16) age 43 to 54 D08 (NG25) 3000 SI age 55 to 65 D08 (NG25) 4600 SI
More informationPilot Operated Directional Valves
ilot Operated Directional Valves Catalog DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) NF D10, ISO-4401-10,
More informationFunctional Description
Under Oil ower ack SA 01 p max 250 bar Q max 17 l/min HA 7111 07/2014 Replaces HA 7111 12/2009 Small compact power packs used in lifting platforms, ramps and other applications 3 basic hydraulic circuits
More informationVALVES INTRODUCTION. DIRECTIONAL CONTROL VALVES SELECTION GUIDE 2 or 3 way for single-acting cylinders or tools. FULL SYSTEM CONTROL
INRODUCION VLVES FULL SYSEM CONROL Hydraulic valves are devices that control different aspects of your hydraulic system's operation. he most common types of valves are directional control valves, flow
More informationThermostatic and Automatic Expansion Valves
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Thermostatic and Automatic Expansion Valves Catalog E-1, July 2012
More informationBulletin HY M6/US Service Bulletin. Series D1VW, H Style 91 Design. Effective: May 1, Directional Control Valves
Service Bulletin 91 Design Effective: May 1, 2007 FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This
More informationDIRECTIONAL VES. Components For The Control Of A Wide Range Of Operating Flows And Pressures
HYD RULI DIREIONL O NROL VLVES VES omponents For he ontrol Of Wide Range Of Operating Flows nd ressures V, DV, ND RORY DIREIONL ONROL VLVES; FOR FLOWS U O 20 GM (76 LM) ND WORKING RESSURES U O 2,500 SIG
More informationD03, D05 & D08 SERIES
INDUSRIL FLUID OWER COMONENS ND SYSEMS D03, D05 & D08 SERIES D03-DC1-70 D05-SQ1--1K D08-R1--3K 31341 Friendship Drive, Magnolia, X 77355 el.: 281-259-7768 Fax: 281-259-7249 www.hyvair.com Features 1. Rugged
More information油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189
ISO 9001:2008 Q100189 油力油壓工業股份有限公司 YOULI HYDRULIC INDUSRIL CO.,LD. V-4 Contents roportional Valve ump side module.5 End plate.6 asic module.7 general dimensions.8 ump side module options.10 System with
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationPulse Width Modulation Valves. Models SPW-0 thru -7
November 2017 Bulletin / Bulletin 30-30 30-30 Page 1 Pulse Width Modulation s Models SPW-0 thru -7 Page 2 Bulletin 30-30 Pulse Width Modulation s For Refrigerant Flow Control in Direct Expansion HFC, HCFC
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationPressure Control Valves Series R. General Description. Specifications. Flow Data
Catalog Y14-2502/US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications
More informationBulletin HY M2/US Service Bulletin. Series D1VW, C Style 91 Design. Effective: May 1, Directional Control Valves
Service Bulletin 91 Design Effective: May 1, 2007 FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This
More informationDirectional Controls
VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................
More informationIFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08
IF DG8 SOLENOID CONROLLED ILO OERED DIRECIONL VLVE SIZE NG/CEO8 Certifiction CE Certified -119115 1 ISO 91: FEurES : Highest performnce in NG Optimized spool design to reduce flow force roven qulity through
More informationInstallation and Startup Manual Hydraulic Pumps Series VP1-095 /-110/ -130
Visit our homepage for additional support parker.com/pmde Installation and Startup Manual Hydraulic Pumps Series VP1-095 /-110/ -130 Effective: May 01, 2015 Supersedes: January 01, 2013 Important installation
More information45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit
Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
DIRECIONL VLVE OERION Directional Valve Features, Selection and Operating Recommendations CONC INFORMION US Headquarters Dynex/Rivett Inc. 770 Capitol Drive ewaukee, WI 3072 U.S.. el: 262-69-2222 FX: 262-69-032
More informationDYNASET PRIORITY VALVE PV-SAE 3/4-1 1/4
DYNSE RIORIY VLVE V-SE 3/4 - /4 DYNSE RIORIY VLVES OF - SE SERIES RE ESECILLY DESIGNED O ENLE ESY ND RELILE INSLLION OF DYNSE HYDRULIC GENEROR O HYDRULIC SYSEM OF NY YE. DYNSE RIORIY VLVE ENLES O OERE
More informationDirectional Control Valves
Frequently sked Questions N-1 Frequently sked Questions What is the function of a directional control valve? directional control valve is the extend and retract control for your hydraulic cylinders. It
More informationMC HYDRAULIC POWER PACK
MC HYDRAUIC OWER ACK echnical Catalogue January 2018 web edition able of contents i Introduction... 2 Endhead configuration... 3 ower pack sections... 5 Selection code... 6 Endhead overall dimensions...
More informationENERPAC hydraulic valves are available in a wide variety of models and configurations.
irectional ontrol s EE hydraulic valves are available in a wide variety of models and configurations. Whatever your requirements directional control, flow control, or pressure control you can be sure that
More informationBasic Electrically-Controlled Hydraulic System
Exercise 2-3 EXERCISE OBJECIVE o describe the function and operation of a magnetic proximity switch; o describe the purpose of a holding relay contact; o assemble and test a one-cycle reciprocation system.
More informationBST / BSG-03 / 06 / 10 Threaded Connections / Sub-plate Mounting. Specifications / Model Number Designation. Max. Flow L/min (U.S.GPM) Double Sol.
Specifications hreaded Connection Mounting BS-- - - - -47 BS-06- - - - -47 BS-0- - - - -47 BSG-- - - - -47 BSG-06- - - - -47 BSG-0- - - - -47 BS / BSG- / 06 / 0 hreaded Connections / Mounting Specifications
More informationAnti-Vibration Collet Gland Assembly
nti-vibration Gland ssembly Pressures to 20,000 psi (1379 bar) Sizes to 1-1/2 (38.10 mm) For extreme conditions of vibration and/or shock in tubing systems, such as an uned line near a compressor, conedand-threaded
More informationExplosion-Proof Valves. According to Directive 94/9/EC (ATEX) and IECEx Requirements
Explosion-Proof Valves ccording to Directive 94/9/EC (EX) and IECEx Requirements WRNING USER RESPONSIILIY FILURE OR IMPROPER SELECION OR IMPROPER USE OF HE PRODUCS DESCRIED HEREIN OR RELED IEMS CN CUSE
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves motion and progress 200--991210-N-03/09.2015 - - - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 Standard valves... p.101 Contents 8.1
More informationMobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationIFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07
ILO OERED DIRECIONL VLVE SIZE NG-1 / CEO-7 Certifiction CE Certified -119115 1 ISO 91: FEURES : Highest performnce in NG 1 Optimized spool design to reduce flow force roven qulity through 1 million endurnce
More informationFunctional Description HA /2008. Hydraulic Power Units SMA 05. Replaces HA /2007. p max up to 250 bar Q max up to 17 L/min
Hydraulic ower Units S 05 p max up to 250 bar Q max up to 17 L/min H 7212 6/2008 Replaces H 7212 10/2007 Compact power packs for the use in lifting platforms, elevating tables, ramps, presses, machine
More informationHydraulic Pump T7AS/T7ASW Series Vane Pumps
Hydraulic ump T7A/T7AW eries Vane umps ressure up to 3 bar Fixed Displacement from 6 to 4 ml/rev. Catalogue HY29-8/UK April 26 Catalogue HY29-8/UK General Characteristics General T7A T7AW Vane umps T7A
More informationHydraulic Pump Division. Product Range - HY /HPD/US. aerospace climate control electromechanical filtration fluid & gas handling
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic Pump Division Product Range - HY28-2673-01/HPD/US WRNING
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 200 991210 03 / 10.04 1/220 HDS11 8 Sectional directional control valves HDS11 8 Standard valves................................................................
More informationOpen center control block in mono block design MO-16, 22, 32
Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:
More informationDIRECTIONAL CONTROLS. Pilot Operated Directional Valves. Specifications
ilot Operated Directional s DIRECIONL CONROLS hese valves perform a change over of spool by hydraulic pilot and shift the direction of oil flow. EIC-E-04-0 Specifications Model Numbers Maximum Flow L/min.
More informationSolenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com able E0854/E Solenoid al valves DHI, DHE, DHER two stage, ISO 440 size 0, 6, 5 and 3 DHI, DHE and DHER are spool, two or three position, two stage al solenoid valves. hey are operated by a
More informationCONTROL VALVES
- 1 CONROL VALVES Introduction to the company HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
More informationTESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 28mm llargato LOD SENSING MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed 2 sections monoblock valve, for hydraulic systems with load sensing variable displacement
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH, IHUNG HSIEN, IWN 41468, RO. EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/
More informationDirectional Controls
Vickers Directional Controls ilot Operated Directional Valves DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves 200--991210-N-03/09.2015 03 / 10.04 1/220 11 Sectional directional control valves HDS30 Contents 11.1 General specifications 197 11.2 Dimensional data
More informationProportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
More information