Clean Fittings. No.06-2 August 2015

Transcription

1 Clean Fittings No.06-2 ugust 205

2 Clean Fitting Contents Clean Weld Fittings Mini lbow WM Mini ee WM Mini Cross WMX Mini educing lbow WM Mini educing ee WM Mini educing Union WMU ong lbow W ong ee W ong Cross WX ong educing ee W ong educing Union WU uto Butt Weld ong lbow W- uto Butt Weld ong ee W- uto Butt Weld ong Cross WX- uto Butt Weld ong educing ee W- uto Butt Weld Union WU- uto Butt Weld educing Union WU- Metal Gasket Face-Seal Fittings Short Gland SG Mini Short Gland MSG ong Gland G Mini ong Gland MG uto Butt Weld Short Gland SG- uto Butt Weld ong Gland G- Male Gland GM uto Butt Weld Mini Short Gland MSG- Socket Gland GS educing Socket Gland GS Short Socket Gland GS dapter Gland G Blind Gland BG Coupling C Union U ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

3 Union lbow 8 Butt Weld Bulkhead Connector B 22 Gasket GK 26 Union ee 8 Swivel Female / Male Union SMU 23 Gasket etainer GK 26 Union Cross X 9 Swivel Female Union SU 23 igh Flow Gland G 27 educing Union U 9 Swivel Male NP Connector SMC 23 igh Flow educer 27 Bulkhead Union UB 9 Swivel Female NP Connector SCF 24 uto Butt Weld igh Flow educer - 27 Fitting Connector C 20 Swivel Fitting Connector S 24 igh Flow Bulkhead educer UB 28 Fitting Bulkhead Connector CB Male NP Connector MC-N Male NP lbow M-N Straight thread O-ing Seal Male Connector MC-UO Female NP Connector CF-N Bulkhead Male NP Connector MCB-N Swivel lbow S Swivel ee S Female Nut FN Male Nut MN Plug P Cap C igh Flow Union lbow igh Flow Union ee igh Flow Female Nut FN igh Flow Male Nut MN Fitting to uto Butt Weld Connector W ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 2

4 Clean Fitting Clean Weld Fittings ating he informed pressure rating in this catalogue is obtained by the calculation with the allowable stress 20,000 psig (,378 bar) of stainless steel 36 at -20 (-28) to 00 (37) according to SM B3.3 and B3. code. he pressure derating factors are greater than 00 (37) shall be determined from these pressure code and is listed in the table. o obtain the adequate pressure rating at the temperature is higher than the 00 (37) in accordance with SM B3.3 and B3. code, that shall be multiply the pressure rating on this catalogue by the factor in the table. Material Material Stainless Steel 36 Stainless Steel 36 Stainless Steel 36 Single Vacuum Melting Stainless Steel 36 ouble Vacuum Melting Cleaning & Packing esignation S S Specificatoin Bar stock Forging SM S479 SM 479 / 276 SM S82 SM 82 able. erating Factor Material SS 36 SS 36 emperature ) erating Factor -20 (-28) ~ 00 (37) ~ 200 (93) ~ 400 (204) ~ 600 (35) ~ 800 (426) ~ 000 (537) Passivation is done in accordance with SM 380 and the Ultra-sonic cleaning in clean room (class 00) is implemented with resistivity over 8MΩ.I water after finishing the passivation for precision cleaning. fter Cleaning, the product shall be double packed in the clean room within anti-static polyethylene bags where let high purity nitrogen in. Surface oughness Grade esignation oughness, a B Nil 0 μin. (0.25μm) Feature - Proper design for tube fitting in the small space - Optimised gap between the parts for tube fitting - Flow capacity to be equivalent to the conventional big size welding fitting ounded gde : all edges of the product are rounded for safety handling and preventing to damage the other products Material eatcode : marked on the product for easy raw material traceability aser Marking : Part number, material and the grade of surface roughness are marked on the body for easy identification WM-6-36 Z Standard surface roughness is 0 μin. (0.25μm) For automatic tube butt welding, integral filler ring can be applicable for proper alignment Sharp and burr-free tube end : adiused Junction : pockets and entrapment zones in the juction portion are eliminated for the smooth flow transition ccurately machined diameter dimension conforms to tube diameter 3 ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

5 Mini lbow WM C O.. C Cubic Body Fractional in. mm (in.) in. WM-2 / (585) 0.4 (0.4) 5/6 WM (35) WM-6 3/8 (0.25).9 (0.47) 7/ (227) WM (0.53) 9/ (254) Metric mm mm (in.) Flat (in.) barg (psig) WM-6M (0.4) 5/6 420 (6095) WM-8M (0.47) 7/6 30 (4499) WM-0M 0 (0.25).9 (0.47) 7/6 240 (3483) WM-2M (0.53) 9/6 200 (2902) Mini ee WM C O.. C Cubic Body Fractional in. mm (in.) in. WM-2 / (585) 0.4 (0.4) 5/6 WM (35) WM-6 3/8 (0.25).9 (0.47) 7/ (227) WM (0.53) 9/ (254) Metric mm mm (in.) Flat (in.) barg (psig) WM-6M (0.4) 5/6 420 (6095) WM-8M (4499).9 (0.47) 7/6 WM-0M 0 (0.25) 240 (3483) WM-2M (0.53) 9/6 200 (2902) Mini Cross WMX C O.. C Cubic Body Fractional in. mm (in.) in. WMX-2 / (585) 0.4 (0.4) 5/6 WMX (35) WMX-6 3/8 (0.25).9 (0.47) 7/ (227) WMX (0.53) 9/ (254) Metric mm mm (in.) Flat (in.) barg (psig) WMX-6M (0.4) 5/6 420 (6095) WMX-8M (4499).9 (0.47) 7/6 WMX-0M 0 (0.25) 240 (3483) WMX-2M (0.53) 9/6 200 (2902) ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 4

6 Mini educing lbow WM C O.. O.. l C Cubic Body Fractional in. mm (in.) in..9 WM6-4 3/8 7/ (227) 6.4 (0.47) WM8-4 (0.25) (254) /6 WM8-6 3/8 (0.53) 3300 (227) Metric mm mm (in.) in. barg (psig) WM8M-6M (4499) 7/6 WM0M-6M (0.47) 240 (3483) WM2M-6M (0.25) /6 200 (2902) WM2M-8M 8 (0.53) Mini educing ee WM C O.. O.. l C Cubic Body Fractional in. mm (in.) in..9 WM6-4 3/8 7/ (227) 6.4 (0.47) WM8-4 (0.25) (254) /6 WM8-6 3/8 (0.53) 3300 (227) Metric mm mm (in.) in. barg (psig) WM8M-6M (4499) 7/6 WM0M-6M (0.47) 240 (3483) WM2M-6M (0.25) /6 200 (2902) WM2M-8M 8 (0.53) Mini educing Union WMU O.. O.. l l Fractional in. mm (in.) WMU4-2 / (35) WMU6-4 3/ (227) WMU8-4 (0.75) (0.4) (0.25) 3700 (254) WMU8-6 3/ (227) Metric mm mm (in.) barg (psig) WMU8M-6M (4499) WMU0M-8M (3483) 8 WMU2M-8M (0.75) (0.4) (0.25) (2902) WMU2M-0M 0 5 ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

7 Clean Weld Fittings ong lbow W l ex. Body Fractional in. mm (in.) in. W (.23) 500 (35) 7/6 W-6 3/ (.20) 3300 (227) W-8 (0.75) 34.0 (.34) / (254) W-2 3/4 37. (.46) 5/ (65) W (.85 ) (0.94) Metric mm mm (in.) Flat (in.) barg (psig) W-6M (6095) 3.2 (.23) 7/6 W-8M 8 30 (4499) 9.0 W-0M (3483) (0.75) 34.0 (.34) /6 W-2M (2902) W-8M (.48) 5/6 ong ee W ong Cross WX l ex. Body Fractional in. mm (in.) in. W (.23) 500 (35) 7/6 W-6 3/ (.20) 3300 (227) W-8 (0.75) 34.0 (.34) / (254) W-2 3/4 37. (.46) 5/ (65) W (.85 ) (0.94) Metric mm mm (in.) Flat (in.) barg (psig) W-6M (6095) 3.2 (.23) 7/6 W-8M 8 30 (4499) 9.0 W-0M (3483) (0.75) 34.0 (.34) /6 W-2M (2902) W-8M (.48) 5/6 l ex. Body Fractional in. mm (in.) in. WX (.23) 500 (35) /6 WX-6 3/ (.20) 3300 (227) (9.0) WX (.34) / (254) Metric mm mm (in.) Flat (in.) barg (psig) WX-6M (6095) 3.2 (.23) 7/6 WX-8M (4499) WX-0M 0 (0.75) 240 (3483) 34.0 (.34) 5/8 WX-2M (2902) ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 6

8 ong educing ee W l ex. Body Fractional in. mm (in.) in W6-4 3/8 7/ (227) (.20) (.23) 34.0 W (254) 34.0 (.34) / (.34) 34.3 W (227) (9.0) (.35) / W (.35) 3/4 5/ (65) (.46) 37.6 W2-4 (.48) Metric mm mm (in.) in. barg (psig) W8M-6M 8 7/6 30 (4499) 6 (.23) (.23) W0M-6M (3483) 0 W0M-8M 8 (0.75) /6 W2M-6M 6 (.34) (.34) 200 (2902) 2 W2M-8M 8 ong educing Union WU l Fractional in. mm (in.) WU6-4 3/ (227) WU (254) WU / (227) WU2-8 3/4 (.50) (0.75) WU (65) WU6-2 3/4 Metric mm mm (in.) barg (psig) WU0M-6M (3483) WU0M-8M 8 WU2M-6M WU2M-8M 2 8 (.50) (0.75) WU2M-0M (2902) WU8M-6M WU8M-2M 2 7 ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

9 Clean Weld Fittings uto Butt Weld ong lbow W- l ex. Body Fractional in. mm (in.) in. W-4 W-6 3/8 W-8 W-2 3/ W (0.75) 24.4 (0.96) 0.5 (0.02) 0.76 (0.03).0 (0.04) 3.8 (.25) 3.2 (.23) 35. (.38) 38. (.50) 48.0 (.89) 7.4 (0.29) 0.4 (0.4) 4.0 (0.55) 20.3 (0.80) 26.9 (.06) 7/6 500 (35) 3300 (227) / (254) 5/ (65) Metric mm mm (in.) in. barg (psig) W-6M 6 W-8M 8 W-0M 0 W-2M 2 W-8M (0.75) 0.5 (0.02) 0.76 (0.03).0 (0.04) 3.8 (.25) 32.0 (.26) 34.8 (.37) 35. (.38) 38.6 (.52) 6.9 (0.27) 8.9 (0.35) 0.9 (0.43) 3.2 (0.52) 9.3 (0.76) 7/6 /6 35 (500) 227 (3300) 254 (3700) 99 (2888) 5/6 206 (2989) uto Butt Weld ong ee W- l ex. Body Fractional in. mm (in.) in. W-4 W-6 3/8 W-8 W-2 3/ W (0.75) 24.4 (0.96) 0.5 (0.02) 0.76 (0.03).0 (0.04) 3.8 (.25) 3.2 (.23) 35. (.38) 38. (.50) 48.0 (.89) 7.4 (0.29) 0.4 (0.4) 4.0 (0.55) 20.3 (0.80) 26.9 (.06) 7/6 500 (35) 3300 (227) / (24) 5/ (65) Metric mm mm (in.) in. barg (psig) W-6M 6 W-8M 8 W-0M 0 W-2M 2 W-8M (0.75) 0.5 (0.02) 0.76 (0.03).0 (0.04) 3.8 (.25) 32.0 (.26) 34.8 (.37) 35. (.38) 38.6 (.52) 6.9 (0.27) 8.9 (0.35) 0.9 (0.43) 3.2 (0.52) 9.3 (0.76) 7/6 /6 5/6 454 (6589) 323 (4687) 254 (3686) 206 (2989) ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 8

10 uto Butt Weld ong Cross WX- l ex. Body Fractional in. mm (in.) in. WX (0.02) 3.8 (.25) 7.4 (0.29) 500 (35) 7/6 WX-6 3/8 9.0 (0.75) 0.76 (0.03) 3.2 (.23) 0.4 (0.4) 3300 (227) WX (0.04) 34.0 (.34) 4.0 (0.55) 5/ (254) Metric mm mm (in.) in. barg (psig) WX-6M (0.02) 6.9 (0.27) 420 (6095) 3.8 (.25) 7/6 WX-8M (0.35) 30 (4499) 9.0 (0.75) 0.76 (0.03) WX-0M (.23) 0.9 (0.43) 240 (3483) 5/8 WX-2M 2.0 (0.04) 34.0 (.34) 3.2 (0.52) 200 (2902) uto Butt Weld ong educing ee W- a d d d l a d ex. Body Fractional in. mm(in.) in W6-4 3/8 7/ (227) (0.03) 0.5 (.25) (.23) (0.4) 7.4 (0.29) (0.02) 35. W (254) (.38) / (.38) (0.55) W8-6 (0.75) /8.0 (0.04) (.37) (227) (0.03) (0.4) W /4 5/ (65) W (0.04) (.50) (.50) (0.80) 4.0 (0.55) Metric mm mm(in.) in. barg (psig) W2M-6M (0.75) 0.5 (0.02) 0.5 (0.02) 34.5 (.36) 35. (.38) 3.2 (0.52) 6.9 (0.27) /6 200 (2902) 9 ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

11 Clean Weld Fittings uto Butt Weld Union WU- Fractional in. mm (in.) WU (0.02) 7.4 (0.29) 500 (35) WU-6 3/ (0.03) 0.4 (0.4) 3300 (227) 25.4 (.0) WU (0.55) 3700 (254) WU-2 3/4.0 (0.04) 20.3 (0.80) 2400 (65) WU (.25) 26.9 (.06) Metric mm mm (in.) barg (psig) WU-6M (0.02) 6.9 (0.27) 420 (6095) WU-8M (0.35) 30 (4499) 0.76 (0.03) WU-0M (.25) 0.9 (0.43) 240 (3483) WU-2M (0.52).0 (0.04) 200 (2902) WU-8M (0.76) uto Butt Weld educing Union WU- d d a d l a d Fractional in. mm (in.) WU6-4 3/8 WU8-4 WU /8 WU2-8 3/ (.58) 9.0 (0.75) 4. (.62) 0.76 (0.03) 0.5 (0.02).0 (0.04) 0.76 (0.03).0 (0.04) 0.4 (0.4) 7.4 (0.29) 4.0 (0.55) 20.3 (0.80) 0.4 (0.4) 4.0 (0.55) 3300 (227) 3700 (254) 3300 (227) 2400 (65) Metric mm mm (in.) barg (psig) WU8M-6M 8 6 WU2M-6M 2 WU2M-8M (.57) 40. (.58) 9.0 (0.75) (.0) (.59) 0.76 (0.03) 0.5 (0.02) 0.76 (0.03) 8.9 (0.35) 3.2 (0.52) 6.9 (0.27) 8.9 (0.35) 30 (4499) 200 (2902) ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 0

12 Clean Fitting Metal Gasket Face-Seal Fittings ating Cleaning & Packing ll pressure rating follow the calculation as to SM B3.3 Process Piping code and SM B3. Power Piping code. he working pressure rating at the room temperature is determined by the material of gasket and the allowable temperature range per the materials is listed in able 2. able 2. emperature range Part Material emperature F ( C) Fitting Gasket Material Material Stainless Steel 36 Stainless Steel 36 Stainless Steel 36 Single Vacuum Melting Stainless Steel 36 ouble Vacuum Melting Gasket SS 36 SS (537) (537) Nickel 600 (35) Copper 400 (204) esignation S S Specificatoin Bar stock Forging SM S479 SM 479 / 276 SM S82 SM 82 SS 36 S SM S82 or quivalent Nickel NI SM F3 or quivalent Copper CU SM B52 or quivalent Passivation is done in accordance with SM 380 and the Ultra-sonic cleaning in clean room (class 00) is implemented with resistivity over 8MΩ.I water after finishing the passivation for precision cleaning. fter Cleaning, the product shall be double packed in the clean room within anti-static polyethylene bags where let high purity nitrogen in. Surface roughness Grade esignation oughness, a B Nil 0 μin. (0.25μm) Plating he internal surface of female-threaded nut are silver plated to reduce the galling and the pull-up torque. In the case of the damage or removal of the silver plating thread galling may be occur and make some damage on the fitting components to prevent proper sealing performance. esting C Fittings meet the below helium leakage limitation per the material of gasket. - Silver plated stainless steel 36 and copper gasket : the maximum leak rate std cm3/s - Unplated stainless steel 36 : the maximum leak rate 4 0 ¹¹ std cm3/s Feature - he eak-tight service provided from vacuum to positive pressure application - Minimized space is needed for installation or removal etainer gasket assembly for easy installation and removal in the minimized space wo holes are for easy leak test Surface roughness is below a 0μin. (0.25 μm) here is no virtual leak zone Female thread has silver-plated to reduce the galling and ensure easy assembly Material eatcode is marked on the product for easy raw material traceability ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

13 Short Gland SG l NI S CU Fractional in. mm (in.) SG-2 / (.08) 8500 (585) 8500 (585) 6800 (468) / (0.75).5 (0.06) SG (.) 500 (35) 500 (35) 500 (35) SG (0.6) 6.4 (0.25) SG (0.72) 9.6 (0.38) 500 (35) 500 (35) 500 (35) 4.6 (0.8) SG (.) 9. (0.75) SG (.2) 9. (0.75) 3500 (24) 4300 (296) 2800 (92) SG (0.62) 6.4 (0.25) 3/8 SG (.2) 9. (0.75) 7.9 (0.3) 3300 (227) 3300 (227) 2600 (79) SG (0.62) 6.4 (0.25) SG (0.74) 9.6 (0.38) 0.2 (0.4) 3500 (24) 3500 (24) 2800 (92) SG (.2) 9. (0.75) Metric mm mm (in.) barg (psig) SG4-6M (0.6) 468 (6800) 468 (6800) 372 (5400) SG4-8M (0.24) 337 (4900) 337 (4900) 337 (4900) (.6) SG8-0M 0 9. (0.75) 8.0 (0.3) 24 (3500) 24 (3500) 92 (2800) SG8-2M (0.39) 23 (300) 23 (300) 65 (2400) SG2-8M 3/ (.22) 5.0 (0.59) 206 (3000) 206 (3000) 65 (2400) Mini Short Gland MSG l NI S CU Fractional in. mm (in.) MSG (0.60) 4.6 (0.8) 500 (35) 500 (35) 500 (35) MSG-6 3/8 3/8 6.4 (0.25) 7.9 (0.3) 3300 (227) 3300 (227) 2600 (79) 5.7 (0.62) MSG (0.40) 3500 (24) 3500 (24) 2800 (92) Metric mm mm (in.) barg (psig) MSG-6M (0.60) 4.0 (0.6) 468 (6800) 468 (6800) 372 (5400) MSG-8M (0.24) 337 (4900) 337 (4900) 337 (4900) 6.4 (0.25) MSG-0M (0.62) 8.0 (0.3) 24 (3500) 24 (3500) 92 (2800) MSG-2M (0.39) 23 (300) 23 (300) 65 (2400) ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 2

14 ong Gland G l NI S CU Fractional in. mm (in.) G-2 /8 / (.42) 9. (0.75).5 (0.06) 8500 (585) 8500 (585) 6800 (468) G (.2) 6.4 (0.25) G (.3) 9. (0.36) G (.32) 9.6 (0.38) 4.6 (0.8) 500 (35) 500 (35) 500 (35) G (.7) 9. (0.75) G (.8) 3500 (24) 4300 (296) 2800 (92) G (.29) 6.4 (0.25) 3/8 G (.79) 9. (0.75) 7.9 (0.3) 3300 (227) 3300 (227) 2600 (79) G (.29) 6.4 (0.25) G (.4) 9.6 (0.38) 0.2 (0.4) 3500 (24) 3500 (24) 2800 (92) G (.79) G-2 3/4 3/4 5.6 (2.03) 9. (0.75) 6.5 (0.65) G (2.32) 22. (0.87) 2400 (65) 2400 (65) 900 (30) Metric mm mm (in.) barg (psig) G4-6M (0.6) 468 ( ( (5400) 43.2 (.7) G4-8M (0.24) 337 (4900) 337 (4900) 337 (4900).0 G8-0M 0 9. (0.75) 8.0 (0.3) 24 (3500) 24 (3500) 92 (2800) 45.5 (.79) G8-2M (0.39) 23 (300) 23 (300) 65 (2400) G2-8M 3/ (2.03) 5.0 (0.59) 206 (3000) 206 (3000) 65 (2400) Mini ong Gland MG l NI S CU Fractional in. mm (in.) MG (.20) 4.6 (0.8) 500 (35) 500 (35) 500 (35) MG-6 3/8 6.4 (0.25) 7.9 (0.3) 3300 (227) 3300 (227) 2600 (79) 32.8 (.29) MG (0.40) 3500 (24) 3500 (24) 2800 (92) Metric mm mm (in.) barg (psig) MG-6M (.22) 4.0 (0.6) 468 (6800) 468 (6800) 372 (5400) MG-8M (.23) 6.0 (0.24) 337 (4900) 337 (4900) 337 (4900) 6.4 (0.25) MG-0M (.29) 8.0 (0.3) 24 (3500) 24 (3500) 92 (2800) MG-2M (.33) 0.0 (0.39) 23 (300) 23 (300) 65 (2400) 3 ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

15 Metal Gasket Face-Seal Fittings uto Butt Weld Short Gland SG- l NI S CU Fractional in. mm (in.) SG (.2 ) 0.5 (0.02) 4.6 (0.8) 7.4 (0.29) 500 (35) 500 (35) 500 (35) SG-6 3/ (.5) 9. (0.75) 0.8 (0.03) 7.9 (0.3) 0.4 (0.4) 3300 (227) 3300 (227) 2600 (79) SG (.6 ).0 (0.04) 0.2 (0.40) 4.0 (0.55) 3500 (24) 3500 (24) 2800 (92) Metric mm mm (in.) barg (psig) SG-6M (.8) 0.5 (0.02) 4.0 (0.6) 6.8 (0.27) 468 (6800) 468 (6800) 372 (5400) SG-8M (.9) 6.0 (0.24) 8.9 (0.35) 337 (4900) 337 (4900) 337 (4900) 9. (0.75) 0.8 (0.03) SG-0M (.22) 8.0 (0.3) 0.9 (0.43) 24 (3500) 24 (3500) 92 (2800) SG-2M (.20).0 (0.04) 0.0 (0.39) 3.2 (0.52) 23 (300) 23 (300) 65 (2400) uto Butt Weld ong Gland G- l NI S CU Fractional in. mm (in.) G-4.72 (43.7) 500 (35) 500 (35) 500 (35) 0.5 (0.02) 4.6 (0.8) 7.4 (0.29) G (24) 3500 (24) 2800 (92).82 (46.2) G-6 3/8 9. (0.75) 0.8 (0.03) 7.9 (0.3) 0.4 (0.4) 3300 (227) 3300 (227) 2600 (79) G-8.83 (46.5) 0.2 (0.40) 4.0 (0.55) 3500 (24) 3500 (24) 2800 (92) G-2 3/4 3/ (52.6).0 (0.04) 6.5 (0.65) 20.3 (0.80) 2400 (65) 2400 (65) 2400 (65) G (65.3) 24.4 (0.96) 22. (0.87) 26.9 (.06) 2400 (65) 2400 (65) 900 (30) Metric mm mm (in.) barg (psig) G-6M (.72) 0.5 (0.02) 4.0 (0.6) 6.8 (0.27) 468 (6800) 468 (6800) 372 (5400) G-8M (.73) 6.0 (0.24) 8.9 (0.35) 337 (4900) 337 (4900) 337 (4900) 0.8 (0.03) G-0M (.83) 9. (0.75) 8.0 (0.3) 0.9 (0.43) 24 (3500) 24 (3500) 92 (2800) G-2M (.83) 0.0 (0.39) 3.2 (0.52) 23 (300) 23 (300).0 (0.04) 65 (2400) G-8M 3/ (52.6) 5.0 (0.59) 0.76 (9.3) 206 (3000) 206 (3000) ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 4

16 Male Gland GM l NI S CU Fractional in. mm (in.) GM-2 /8 7.8 (0.70) 9000 (620) 200 (77) 7200 (496) /8 7. (0.28).5 (0.06) GM (.3) 8000 (55) 0000 (689) 6400 (440) GM (0.2) GM (0.4) 4300 (296) 2800 (92) GM-6 3/8 38. (.50 ) 7. (0.28) 3500 (24) GM (0.50) 0.4 (0.2) 3500 (24) 3500 (24) GM-2 3/4 3/ (2.00) 5.7 (0.62) 0.53 (3.5) 3000 (206) 3700 (254) 2400 (65) GM (2.22) 20.6 (0.8) 0.75 (9.) 2400 (65) 3000 (206) 900 (30) uto Butt Weld Mini Short Gland MSG- l NI S CU Fractional in. mm (in.) MSG (0.62) 4.6 (0.8) 7.4 (0.29) 500 (35) 500 (35) 500 (35) (0.02) MSG-6 3/8 6.6 (0.65) 7.9 (0.3) 0.4 (0.4) 3300 (227) 3300 (227) 2600 (79) (0.25) MSG (0.66).0 (0.04) 0.2 (0.40) 4.0 (0.55) 3500 (24) 3500 (24) 2800 (92) Metric mm mm (in.) barg (psig) MSG-6M (0.62) 0.5 (0.02) 4.0 (0.6) 6.8 (0.27) 468 (6800) 468 (6800) 372 (5400) MSG-8M (0.24) 8.9 (0.35) 337 (4900) 337 (4900) 337 (4900) 6.6 (0.65) 0.8 (0.03) MSG-0M 0 (0.25) 8.0 (0.3) 0.9 (0.43) 24 (3500) 24 (3500) 92 (2800) MSG-2M (0.66).0 (0.04) 0.0 (0.39) 3.2 (0.52) 23 (300) 23 (300) 65 (2400) 5 ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

17 Metal Gasket Face-Seal Fittings Socket Gland GS NI S CU Fractional in. mm (in.) GS2-S /6.3 (0.05 ) 3.3 (0.3) 9000 (620) 9000 (620) 7200 (496) /8 7.8 (0.70) 2.5 (0.0) GS-2S /8 2.3 (0.09) 5. (0.20) 700 (489) 700 (489) 700 (489) GS-4S 33.3 (.3) 7. (0.28) 4.6 (0.8) 8.9 (0.35) 5500 (378) 5500 (378) 5500 (378) GS-6S 3/8 7.9 (0.3) 7. (0.28) 3500 (24) 4300 (296) 2800 (92) 38. (.50 ) 5.2 (0.60) GS-8S 9.6 (0.38) 0.2 (0.40) 3000 (206) 3000 (206) 2400 (65) GS-0S 5/8 5/ (.56) 0.4 (0.4) 2.7 (0.50) 8.3 (0.72) 2800 (92) 2800 (92) 2200 (5) GS-2S 3/4 3/ (2.00).2 (0.44 ) 5.7 (0.62) 22.4 (0.88) GS-6S 56.4 (2.22) 5.7 (0.62) 22. (0.87 ) 30.2 (.9 ) 2400 (65) 3000 (206) 900 (30) educing Socket Gland GS NI S CU Fractional in. mm (in.) GS4-2S / (.3) 2.5 (0.0) 2.3 (0.09) 8.9 (0.35) 8000 (55) 8000 (55) 8000 (55) GS8-4S 38. (.50 ) 7. (0.28) 4.6 (0.8) 5.2 (0.60) 3500 (24) 3500 (24) 3500 (24) Short Socket Gland GS NI S CU Fractional in. mm (in.) GS-4S (0.5 ) 7. (0.28) 4.6 (0.8) 8.9 (0.35) 5500 (378) 5500 (378) 5500 (378) GS-4S9. 9. (0.75) ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 6

18 dapter Gland G l NI S CU Fractional in. mm (in.) G (.62) 6.2 (0.64) 4.3 (0.7) 8000 (55) 0000 (689) 6400 (440) G-6 3/ (.8) 7.8 (0.70) 6.8 (0.27) 3500 (24) 4300 (296) 2800 (92) G (.94) 24.4 (0.96) 9.4 (0.37 ) Blind Gland BG mm (in.) BG-2 /8 7.8 (0.7 ) BG (.3) BG (.50) BG-2 3/ (2.00) BG (2.22) Coupling C ex. mm (in.) in. C-2 /8 6.8 (0.66 ) 7/6 C (.9 ) 3/4 C (.3) /6 C-2 3/ (.68) C (2.04) 3/4 7 ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

19 U Metal Gasket Face-Seal Fittings Union, ex U-2 / (.3) 2.3 (0.09) 3/ (620) 200 (77) 7200 (496) U (.55) 4.6 (0.8) 5/ (55) 0000 (689) 6400 (440) U (.84) 0.2 (0.40 ) 5/ (24) 4300 (296) 2800 (92) U-2 3/ (2.44 ) 5.7 (0.62) 5/ (206) 3700 (254) 2400 (65) U (2.59) 22. (0.87) 5/ (65) 3000 (206) 900 (30) Union lbow, ex. -2 / (0.89) 2.3 (0.09) 7/ (620) 200 (77) 7200 (496) (.07) 4.6 (0.8) 8000 (55) 0000 (689) 6400 (440) (.45) 0.2 (0.40 ) 3/ (24) 4300 (296) 2800 (92) -2 3/ (.92) 5.7 (0.62) 3000 (206) 3700 (254) 2400 (65) (2.00 ) 22. (0.87) / (65) 3000 (206) 900 (30) Union ee, ex. -2 / (0.89) 2.3 (0.09) 7/ (620) 200 (77) 7200 (496) (.07) 4.6 (0.8) 8000 (55) 0000 (689) 6400 (440) (.45) 0.2 (0.40 ) 3/ (24) 4300 (296) 2800 (92) -2 3/ (.92) 5.7 (0.62) 3000 (206) 3700 (254) 2400 (65) (2.00 ) 22. (0.87) / (65) 3000 (206) 900 (30) ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 8

20 Union Cross X, ex. X-2 / (0.89) 2.3 (0.09) 7/ (620) 200 (77) 7200 (496) X (.07) 4.6 (0.8) 8000 (55) 0000 (689) 6400 (440) X (.45) 0.2 (0.40 ) 3/ (24) 4300 (296) 2800 (92) X-2 3/ (.92) 5.7 (0.62) 3000 (206) 3700 (254) 2400 (65) X (2.00 ) 22. (0.87) / (65) 3000 (206) 900 (30) educing Union U, ex. U4-2 / (.37) 4.6 (0.8) 2.3 (0.09) 5/ (55) 0000 (689) 6400 (440) U (.7) 0.2 (0.40 ) 4.6 (0.8) 5/ (24) 4300 (296) 2800 (92) Bulkhead Union UB l, ex., ex. Panel ole Max. Panel mm (in.) in. in. in. (mm) NI S CU UB (2.23) 33.0 (.30) 0.44 (.2) 4.6 (0.8) 3/4 3/4 9/32 (5.0) UB (.82) 25. (0.99) 0.3 (3.3) UB (2.57) 37.6 (.48) 0.50 (2.7) 0.2 (0.40 ) /6 /6 29/32 (23.) UB (2.4) 28.2 (.) 0.3 (3.3) 8000 (55) 0000 (689) 6400 (440) 3500 (24) 4300 (296) 2800 (92) 9 ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

21 Metal Gasket Face-Seal Fittings Fitting Connector C B B, ex., ex. mm (in.) in. in. NI S CU C4-2 / (.53) 5.2 (0.60) 2.7 (0.50) 2.3 (0.09) 7/6 5/8 C (.62) 7.8 (0.70) 5.2 (0.60) 4.6 (0.8) 9/6 C8-6 3/ (.84) 9.3 (0.76) 6.8 (0.66) 7. (0.28) /6 5/6 C (.95) 2.8 (0.86) 22.9 (0.90) 0.2 (0.40) 7/ (55) 0000 (689) 6400 (440) 3500 (24) 4300 (296) 2800 (92) Fitting Bulkhead Connector CB 2 B CB4-4 CB4-448 CB8-6 3/8 CB8-8 B, ex., ex. 2, ex (2.25) 47.8 (.88) 64.5 (2.54) 69.6 (2.74) Panel ole Max. Panel mm (in.) in. mm (in.) NI S CU 33.5 (.32) (0.60) (.05) 36.8 (.45) 4.9 (.65) 6.8 (0.66) 22.9 (0.90) 4.6 (0.8) 7. (0.28) 0.2 (0.40) 5/8 5/8 9/6 5/6 3/4 /6 5/6 7/8 5/32 (.9) 9/32 (5.0) 25/32 (9.8) 0.2 (0.4) 3.3 (0.3).2 (0.44) 2.7 (0.5) 8000 (55) 3500 (24) 0000 (689) 4300 (296) 6400 (440) 2800 (92) ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 20

22 Male NP Connector MC-N NP l, ex. MC2-N /6 3/8 / (.07) 2.3 (0.09) 9000 (620) 9000 (620) 7200 (496) MC2-2N 9.6 (0.38) 7/6 /8 MC4-2N 33.3 (.3) 4.6 (0.8) 5/ (55) 0000 (689) 6400 (440) MC4-4N 37.8 (.49) MC8-4N 4.2 (0.56) 7. (0.28) 4.9 (.65) MC8-6N 3/8 9.6 (0.38) 5/ (24) 4300 (296) 2800 (92) MC8-8N 46.7 (.84) 0.2 (0.40) 9. (0.75) MC2-2N 3/4 3/ (2.9) 5.7 (0.62) 5/ (206) 3700 (254) 2400 (65) MC6-6N 62.7 (2.47) 23.9 (0.94) 22. (0.87 ) 5/ (65) 3000 (206) 900 (30) Male NP lbow M-N NP M4-2N /8 22. (0.87) 9.6 (0.38).07 (27.2) M4-4N 26.7 (.05) 4.2 (0.56) M8-6N 3/ (.26).45 (36.8) M8-8N 36.8 (.45) 9. (0.75) l, ex. 4.6 (0.8) 8000 (55) 0000 (689) 6400 (440) 8000 (55) 8000 (55) 0.2 (0.40) 3/ (24) 4300 (296) 2800 (92) Straight thread O-ing Seal Male Connector MC-UO l, ex. Straight Standard hread O-ing MC4-6U 33.8 (.33) 9.9 (0.39) 6.4 (0.25 ) 4.6 (0.8) 7. (0.28 ) 3/ (30) 4500 (30) 4500 (30) 9/ MC8-6U 37.6 (.48) 9.9 (0.39) - 7. (0.28 ) 5/6 7. (0.28) 3500 (24) 3500 (24) 2800 (92) MC8-0U 7/ (.66) 2.7 (0.50) 0.2 (0.40) 5.0 (0.59) 90 2 ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

23 Metal Gasket Face-Seal Fittings Female NP Connector CF-N NP, ex. CF2-N / (.0) 7/ (46) 6700 (46) 6700 (46) /8 2.3 (0.09) CF2-2N 30.2 (.9) 9/ (447) 6500 (447) 6500 (447) /8 CF4-2N 35.8 (.4) 5/ (55) 8000 (55) 6400 (440) 4.6 (0.8) CF4-4N 39. (.54) 3/ (454) 6600 (454) 5200 (358) CF8-6N 3/ (.76) 5/6 0.2 (0.40) CF8-8N 50.5 (.99) / (24) 4300 (296) 2800 (92) CF2-2N 3/4 3/ (2.36) 5.7 (0.62) 5/ (206) 3700 (254) 2400 (65) CF6-6N 63.8 (2.5) 22. (0.87) 5/ (65) 3000 (206) 900 (30) Bulkhead Male NP Connector MCB-N MCB4-4N MCB8-4N NP l l, ex., ex. 56. (2.2) 59.4 (2.34) 5.7 (0.62) (0.56) (0.75) Panel ole Max. Panel mm (in.) in. in. (mm) NI S CU 4.6 (0.8) (0.28) (0.40) 3.5 (.24) 3/ (55) 8000 (55) 6400 (440) 3/6 2/32 (6.8) 0.38 (9.7) 5/ (24) 4370 (30) 2800 (92) Butt Weld Bulkhead Connector B B4-4 B4-450 l l, ex (2.36) (0.75) (.95) Panel ole Max. Panel mm (in.) in. in. (mm) NI S CU 33.0 (.30) (0.8) (0.99) 5.6 (0.22) 3/4 9/32 (5.0) 0.44 (.2) 0.3 (3.3) 500 (35) 500 (35) 500 (35) ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 22

24 Swivel Female / Male Union SMU SMU-4, ex., ex (.69) 4.55 (0.8) 5/8 3/ (55) 0000 (689) 6400 (440) Swivel Female Union SU SU-4 SU-8, ex (.7) 46.7 (.84) 4.6 (0.8) 3/ (55) 0000 (689) 6400 (440) 0.2 (0.4) / (24) 4300 (296) 2800 (92) Swivel Male NP Connector SMC NP SMC 4-2N /8 SMC 4-4N SMC 8-6N 3/8 SMC 8-8N l l, ex., ex..58 (40.) 9.6 (0.38).79 (45.5) (0.56) (48.0) 2.09 (53.) 9. (0.75 ) 24. (0.95) (0.8) (0.92) 25.4 (.00 ) 0.2 (0.40) 25.6 (.0) 7/6 9/6 /6 7/8 3/ (55) / (24) 8000 (55) 4300 (296) 6400 (440) 2800 (92) 23 ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

25 Metal Gasket Face-Seal Fittings Swivel Female NP Connector SCF NP SCF4-4N SCF8-6N 3/8 SCF8-8N l, ex., ex (.77) 49.5 (.95) 55.4 (2.8 ) 23.4 (0.92) 4.6 (0.8) 26.9 (.06) (0.40) (.04) 3/4 3/4 7/8 /6 / (454) 3500 (24) 6600 (454) 4300 (296) 5200 (358) 2800 (92) Swivel Fitting Connector S (in.) S-4 B, ex., ex. 2, ex. 4.6 (0.8) 49.3 (.94) 5.2 (0.6) 7.8 (0.7) 3/4 9/ (55) 0000 (689) 6400 (440) 2 Swivel lbow S S-4, ex (.00) 4.6 (0.8) 3/4 500 (35) 500 (35) 500 (35) B ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 24

26 Swivel ee S S (.00) 4.6 (0.8) 3/4, ex. 500 (35) 500 (35) 500 (35) Female Nut FN, ex. mm (in.) in. FN-2 /8 3.5 (0.53) 5.3 (0.2) 7/6 FN (0.8) 9. (0.36) 3/4 FN (0.6) / (0.88) FN-0 5/8 8.8 (0.74) 3/6 FN-2 3/ (.2) 22.6 (0.89) FN (.34) 30.5 (.20) 3/4 Male Nut MN, ex. mm (in.) in. MN-2 /8 2.7 (0.50) 5.3 (0.2) 3/8 MN (0.7) 9. (0.36) 5/8 MN (0.6) 5/ (0.8) MN-0 5/8 8.8 (0.74) /6 MN-2 3/ (.00) 22.6 (0.89) 5/6 MN (.9) 30.5 (.20) 5/8 25 ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

27 Metal Gasket Face-Seal Fittings Plug P () l, ex. mm (in.) in. P-2 /8 6.0 (0.63) 7.6 (0.30) 7/6 P (0.94).2 (0.44 ) 3/4 P (.0).4 (0.45) /6 P-2 3/ (.29) 3.7 (0.54) P (.54) 6.0 (0.63) 3/4 Cap C, ex. mm (in.) in. C-2 /8 7.3 (0.68) 3/8 C (0.92) 5/8 C (.08) 5/6 C-2 3/ (.43) 5/6 C (.52) 5/8 Gasket GK mm (in.) GK-2 /8 2.3 (0.09) 6.6 (0.26) GK (0.22).9 (0.47) GK-8.2 (0.44) 9.8 (0.78) GK-0 5/8 4.7 (0.58) 23. (0.9) 0.8 (0.03) GK-2 3/4 6.8 (0.66) 29.0 (.4) GK (0.89) 35.6 (.40) Gasket etainer GK mm (in.) GK (0.22).9 (0.47) > 2.7 (0.5) GK-8.2 (0.44) 9.2 (0.76) > 20. (0.79) GK-2 3/4 6.8 (0.66) 28.5 (.2) > 29 (.4) 0.8 (0.03) GK (0.89) 35. (.38) > 35.6 (.4) ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 26

28 igh Flow Gland G uto Butt Weld igh Flow educer - G (0.60) 0.4 (0.4) G / () 30.2 (.9) 25.4 (.00) G (.3) 28.4 (.2) l mm (in.) NI S CU 6.4 (0.25) 7.9 (0.3) 3300 (227) 3300 (227) 3300 (227) igh Flow educer l l, ex / (.68) 9. (0.75) 5.7 (0.62) 6.4 (0.25) 7.9 (0.3) 5/ (227) 3300 (227) 3300 (227) 4-6 3/8 l l (d), ex (.7) 9. (0.75) 5.7 (0.62) 0.8 (0.03) 6.4 (0.25) 7.9 (0.3) 0.4 (0.4) 5/ (227) 3300 (227) 3300 (227) 27 ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

29 Metal Gasket Face-Seal Fittings igh Flow Bulkhead educer UB (in.) UB4-6 3/8 l l 59.9 (2.36) 9. (0.75) 33.0 (.30) Panel ole Max. Panel, ex., ex. 6.4 (0.25) 7.9 (0.3) 5.0 (9/32).2 (0.44) 3/4 3/ (227) 3300 (227) 3300 (227) igh Flow Union lbow igh Flow Union ee, ex (.07) 6.4 (0.25) 8000 (55) 0000 (689) 6400 (440) ex (.07) 6.4 (0.25) 8000 (55) 0000 (689) 6400 (440) ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 28

30 igh Flow Female Nut FN, ex. mm (in.) in. FN-4S 9.9 (0.39) 20.6 (0.8) FN-4.7 (0.46) 3/4 igh Flow Male Nut MN, ex. mm (in.) in. MN-4S 8.0 (0.7) 9.9 (0.39) 5/8 Fitting to uto Butt Weld Connector W B C W4-4 W6-6 3/8 l B C NI S CU in. mm (in.) in (.74) (0.75) (.84) 0.5 (0.02) 5.2 (0.6) 6.8 (0.22) 7.8 (0.7) 9.3 (0.76) 4.6 (0.8) 7.9 (0.3) 7.4 (0.29) 0.4 (0.4) 9/6 500 (35) 500 (35) 500 (35) 5/8 / (227) 3300 (227) 2600 (79) 29 ll dimensions are in millimeters unless otherwise specified and only for reference subject to change.

31 Clean Fitting Metal Gasket Face-Seal Fittings Welding GW GW Gasket ssembly Wrench ighten old /8 ~ urn ll dimensions are in millimeters unless otherwise specified and only for reference subject to change. 30

32 ead Quartersand Factory 7, Golden root-ro 29beon-gil, Juchon-myeon, Gimhae-si, Gyeongsangnam-do, South Korea el. (82) Fax. (82)