P95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients
|
|
|
- Tyrone Phillips
- 5 years ago
- Views:
Transcription
1 PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil and gas, process gases, steam and liquids. vailable in three spring ranges and metal or elastomer diaphragm and orifice seat materials. pplications Steam Injection In Line Gas and Liquid Control Chemical Boilers, Process Heaters PH Part Matrix PH 0 0 Body Size 04 1/ NPT 06 3/4 NPT NPT Spring PSIG BR Standard 10 RF * B 300 RF * C 600 RF * D Socket Weld * Valve Plug / Ori ce Material 416 SS (Metal / Metal) C 416 SS / Neoprene G Brass / Neoprene Diaphragm Material 0 30 SS 3 Neoprene Case / Body Material 0 Iron / Iron 1 Steel / Steel 3 Iron / Steel PH Flow Coefficients Body Size, Inches Wide Open Coefficients (For Relief Sizing) C 1 K m C v C G C S 1/ /4, PH Maximum s * Steel Bodies Only Specifications Maximum Inlet s Body Size 0 PSIG Iron / NPT 300 PSIG Steel / NPT 1 30 PSIG 7 PSIG PSIG 1 NPT 3 4 NPT 1 NPT Temp. -40 F to 40 F -40 C to 08 C Weight pproximate 1/" 8 lb 3.6 kg 3/4" 1 lb 8.6 kg 1" 1 lb 8.6 kg Materials of Construction Body, Bonnet, Diaphragm Case Cast Iron Steel Diaphragm 30SS Neoprene Supply Valve Shutoff Metal to Metal Metal to Elastomer Spring Nominal Body Size, Inches (DN) Body and Spring Case Materials End Connections Max Inlet Max Outlet PSIG BR PSIG BR Body Size PSIG BR Spring Color Code Yellow Cast Iron NPT /, 3/4 and 1 NPT Green Steel NPT /, 3/4, 1 Steel 10RF Red Steel 300RF belgas.net < 7 >
2 DIVISION OF MRSH BELLOFRM DIVISION OF MRSH BELLOFRM PRT NO. TYPE TRIM RNGE MX INLET T TEMP DTE LOT CSING PRESS DIVISION OF MRSH BELLOFRM PH Dimension, Inches Nominal Body Size, Inches B C D 1/ /4, / NPT D 3/4 & 1 NPT D PRT NO. TYPE DTE TRIM RNGE LOT CSING PRESS C PRT NO. TYPE DTE C TRIM LOT MX INLET T TEMP RNGE CSING PRESS MX INLET T TEMP NPT NPT B B Flanged 3/4 & 1 NPT 6.".1" 3.00" 7" " < 8 > belgas.net
3 PH Regulator Rebuild Kits PH 1/" Repair Kits PH 3/4" & 1" Repair Kits Kit Includes 30SS Diaphragms(), Diaphragm Gasket, 416SS Ori ce, 416SS/Neoprene Valve Plug, Valve Spring 30SS Diaphragms(), Diaphragm Gasket, 416SS/M to M Ori ce, 416SS/M to M Valve Plug, Valve Spring Neoprene Diaphragm, 416SS Ori ce, 416SS/Neoprene Valve Plug, Valve Spring Neoprene Diaphragm, Brass Ori ce, Brass/Neoprene Valve Plug, Valve Spring 30SS Diaphragms(), Diaphragm Gasket, 416SS Ori ce, 416SS/Neoprene Valve Plug, Valve Spring 30SS Diaphragms(), Diaphragm Gasket, 416SS/M to M Ori ce, 416SS/M to M Valve Plug, Valve Spring Neoprene Diaphragm, 416SS Ori ce, 416SS/Neoprene Valve Plug, Valve Spring Neoprene Diaphragm, Brass Ori ce, Brass/Neoprene Valve Plug, Valve Spring Part Number 71-P P P P P P P P-003 PH Steam Capacities 1 with Metal Diaphragm Outlet Outlet 1/" Body Size 3/4" Body Size 1" Body Size Inlet Setting Offset Offset Offset PSIG BR PSIG BR 10% 0% 40% 10% 0% 40% 10% 0% 40% to 30 PSIG (1.0 to.1 BR) to 7 PSIG (1.7 to. BR) to 10 PSIG (4.8 to BR) Capacities are based in Pounds of saturated steam per hour. belgas.net < >
4 PH s Nominal Body Size, Inches 1/ 3/4, 1 Outlet or Differential (1) Spring Wire Diameter Spring Part Number Spring Color PSIG BR Inches mm 1 to to Yellow to to Green 70 to to Red 1 to to Yellow to to Green 70 to to Red PH ir SCFH Capacities with Elastomer Diaphragm Outlet 1 to 30 PSIG (1.0 to.1 BR) to 7 PSIG (1.7 to. BR) 70 to 10 PSIG (4.8 to 10.3 BR) Outlet Setting Inlet 1/" Body Size 3/4" Body Size 1" Body Size Offset Offset Offset PSIG BR PSIG BR 10% 0% 40% 10% 0% 40% 10% 0% 40% , , , ,000 1, , ,700 16, , ,000 17, ,000 10,000,000 18, , , , ,000 16, ,000 16,000 10,000 1,000, ,000 17,000 1,000 18,000 6, ,000 18,000,000 0,000 7, ,000,000 1,000 1,000 1,000 8, , , ,000 1, ,000 16, ,000 1,000 16,000 18,000 4, ,000 17,000 4,000 1,000 4,000 31, ,000 18,000,000 17,000 6,000 36, ,000 18,000 6,000 1,000 7,000 38, ,000 1, ,000 1, ,000 16,000 1,000 13,000 17,000 0, ,000 18,000,000 13,000 1,000, ,000 1,000 4,000 17,000 8,000 3, ,000 4,000,000,000 33,000 38, ,000 16,000,000 8,000 3,000 3,000 4, ,000 18,000 11,000 16,000 1, ,000 1,000 18,000,000,000 0,000 3, ,000 13,000 1,000 6,000 16,000,000 8, ,000 1,000 3,000 30,000 16,000 7,000 3, ,000 1,000,000 37,000 1,000 34,000 3, ,000 1,000 1,000,000 41,000 6,000 38,000 46, ,000 1,000 18,000 1,000 13,000 0,000 3, ,000 13,000 1,000,000 1,000 3,000 7, ,000 16,000,000,000 17,000 8,000 31, ,000 16,000 17,000 8,000 33,000 1,000 30,000 3, ,000 17,000 18,000,000 37,000 0,000 34,000 3, ,000 1,000 1,000 3,000 4,000 6,000 41,000 46, ,000,000 0,000,000 16,000,000 6, ,000,000 16,000 4,000,000 0,000 6,000 30, ,000 16,000 0,000,000 33,000,000 30,000 3, ,000 18,000 0,000 30,000 37,000 6,000 3,000 3, ,000 0,000 3,000 37,000 4,000 31,000 44,000 46,000 < 30 > belgas.net
5 PH Water Capacities with Elastomer Diaphragm 1 Outlet Outlet Setting Inlet 1/" Body Size 3/4" Body Size 1" Body Size Offset Offset Offset PSIG BR PSIG BR 10% 0% 40% 10% 0% 40% 10% 0% 40% to 30 PSIG (1.0 to.1 BR) to 7 PSIG (1.7 to. BR) to 10 PSIG (4.8 to BR) Capacities are based in gallons per minute of water. belgas.net < 31 >
6 PH Parts for 1/" Body Item Description Part Number 1 Body Cast Iron, 1/ Steel, 1/ Bonnet Cast Iron, Tapped Steel, Tapped Stainless Steel (Metal) Ori ce Brass (Composite) Stainless Steel (Composite) Valve Plug Seat, 416 SS (Metal) Valve Plug 416 Stainless Steel / Neoprene Seat ssemblies Brass / Neoprene Seat Valve Plug 416 SS Guide Brass Stem ssembly, 416 SS Stem Guide Bushing, 416 SS Valve Plug Spring, SS PSIG, Yellow PSIG, Green Springs PSIG, Red Diaphragm Neoprene Stainless Steel ( Required) djusting Screw, Steel Build Screws, Steel (8 Required) Jam Nut, Steel Diaphragm Gasket, Composition (Metal Diaphragms Only) Spring Guide, Steel NCE Tag (Not Shown) PH Nameplate (Not Shown) Piston, luminum Nameplate Drive Screws ( Required) (Not Shown) PH Parts for 3/4" & 1" Bodies Item Description Part Number Cast Iron, 3/ Body Steel, 3/ Cast Iron, Steel, Bonnet Cast Iron, Tapped Steel, Tapped Stainless Steel (Metal / Metal) Ori ce Brass (Composite) Stainless Steel (Composite) Valve Plug Seat, 416 SS (Metal) Valve Plug Seat 416 Stainless Steel / Neoprene ssemblies Brass / Neoprene Seat Valve Plug 416 SS Guide Brass Stem ssembly, 416 SS SS Stem Guide Bushing, Valve Plug Spring, SS PSIG, Yellow PSIG, Green Springs PSIG, Red Diaphragm Neoprene Stainless Steel ( Required) djusting Screw, Steel Build Screws, Steel (8 Required) Jam Nut, Steel Diaphragm Gasket, Composition (SS Diaphragms Only) Spring Guide, Steel NCE Tag (Not Shown) PH Nameplate (Not Shown) Piston, luminum Nameplate Drive Screws ( Required) (Not Shown) Pitot Tube < 3 > belgas.net
D I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
Applications. T98H Part Matrix. Specifications. Spring Range. Materials of Construction. T98H Regulator Rebuild Kits. marshbellofram.
TH Back Regulator / Valve The TH monitors upstream pressure and opens to relieve excess pressure increases above setpoint. s a Back Regulator, the upstream pressure is monitored and released downstream
P630 High Flow Gas Regulator
High Flow Gas Regulator Stainless Steel Internals are Standard Steel Units comply with NACE MR0175 Durable Powder Coated Exterior Wide of Flow Capacities The is a spring loaded, direct-operated regulator
F200 Pilot Operated Pressure Regulator
F200 Pilot Operated Pressure Regulator External or Internal Pressure Registration Minimize Sudden Downstream Load Change Ideal for Fix Factor Billing Quick Response Time / High ccuracy The F200 series
P627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
F200 Pilot Operated Pressure Regulator
F00 Pilot Operated Pressure Regulator External or Internal Pressure Registration Minimize Sudden ownstream Load Change Ideal for Fix Factor Billing Quick Response Time / High ccuracy The F00 series is
P99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
P627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
P627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
T200 Pressure Regulator
T200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges T202 has internal relief valve for overpressure protection The T200 series pressure regulator is a manual, direct acting,
R627 High Flow Gas Regulator with Internal Relief
High Flow Gas Regulator with Internal Relief The Relieving Regulator has an internal relief valve that provides protection against over pressurization. As output pressure builds up above the start-to-discharge
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
F300 Pressure Regulator
F300 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P302 has Internal Relief Valve for Overpressure Protection Ideal for Fix Factor Billing The F300 series pilot operated
R627 High Flow Gas Regulator with Internal Relief
High Flow Gas Regulator with Internal Relief The Relieving Regulator has an internal relief valve that provides protection against over pressurization. As output pressure builds up above the start-to-discharge
P600 Pressure Regulator
P600 Pressure Regulator The BelGAS P600 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with
P627 HIGH FLOW GAS REGULATOR
Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility CE Construction Available The P627 is a spring loaded, direct-operated regulator for both low and high pressure applications
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high-pressure systems. These regulators can be used with natural
Built-in Slam-Shut Valve. Independent pneumatic control Accuracy class: ±5% Response time: 1 second. 1/2, 11/16, and 3/4-inch (13, 18, and 19 mm)
RP Series Regulators Introduction The RP Series regulators are direct-operated with non-balanced trim. Normally they are fitted with a built-in filter. They are produced in the following versions: Types
MR98 Series Backpressure Regulators, Relief and Differential Relief Valves
MR98 Series Backpressure Regulators, Relief and Differential Relief Valves January 2014 P1753 TyPE MR98H P1757 TyPE MR98L Figure 1. Typical MR98 Series Backpressure Regulators, Relief and Differential
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high pressure systems. These regulators can be used with natural
T205 Series Tank Blanketing Regulators
Bulletin 74.1 D103747X012 T205 Series June 2018 T205 Series Tank Blanketing Regulators Figure 1. Type T205 Tank Blanketing Regulator Contents Features... 1 Introduction.... 1 Specifications... 2 Principle
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (Figure ) and Model 5450 (Figure 2) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry. These
Kunkle Bailey 756 safety relief valve
The 756 safety valve combines a top piston guided valve and an unobstructed seat bore with a full lift capability, giving maximum discharge capacity Features Design incorporates an adjustable blowdown
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated reducing regulators (Figure 1) are for low and high systems. These regulators can be used with natural gas, air, or a
T205 Series Tank Blanketing Regulators
T205 Series Tank Blanketing Regulators Bulletin 74.1:T205 September 2013 Figure 1. Type T205 Tank Blanketing Regulator Contents Features...1 Introduction...2 Specifi cations...2 Principle of Operation...2
Type MR108 Direct-Operated Backpressure Regulators
July 2016 Type MR108 Direct-Operated Backpressure Regulators P1202_1 P1203_1 Type mr108 with low-pressure Actuator Type mr108 with high-pressure actuator Figure 1. Type MR108 Direct-Operated Backpressure
Baumann Series Sanitary Regulators
Bulletin 84000 Series Regulators Baumann 84000 Series Sanitary Regulators Pressure regulation for your sanitary process. The Baumann 84000 series of sanitary regulators are designed specifically for those
Series Pressure Relief Valves 197C
Series 2700 Pressure Relief Valves 197C Table of Contents General Description...IFC Ordering Information & Numbering System...1 Bill of Materials-Conventional...2 Bill of Materials-Balanced Design...3
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
CASH VALVE B SERIES PRESSURE REGULATORS
Single seated, spring loaded, direct acting diaphragm-type pressure reducing and regulating valves for a broad range of services FEATURES Reduce high inlet pressures to lower outlet pressures within close
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (open yoke) and Model 5450 (closecoupled) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry.
Mark 608BP Series. Pressure Regulators Mark 608BP Gas Pressure Regulators. Balanced Plug Gas Pressure Regulators. Features
Mark 608BP Series Balanced Plug Gas Pressure Regulators The Mark 608BP Balanced Plug Gas Pressure Regulator is the ideal valve for low pressure gas regulation with higher inlet pressures. The selfcontained
Type SR8 Sanitary Backpressure Regulator
Type SR8 Sanitary Backpressure Regulator September 2015 Sanitary Design Standards Superior Flow Performance and Accuracy Wide Control Range Diaphragm Cycle Life Highly Stable Large Turndown Ratio Tight
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
Cash Valve. Type G-60. High Capacity Pressure Regulator. Flow Control. Issued - February 2001 CAVMC-0511-US-0609 ISO 9001 Certified
Cash Valve Type G-60 High Capacity Pressure Regulator Issued - February 2001 CAVMC-0511-US-0609 ISO 9001 Certified Flow Control Type G-60 High Capacity Pressure Reducing And Regulating Valve Description
Type FL Pressure Reducing Regulators
ulletin 71.2 D103067X012 Type FL January 2017 Type FL Pressure Reducing Regulators Features No tmospheric leed Eliminates nuisance and wasteful bleed gas to atmosphere by utilizing a self-contained control
Modulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
Cash Valve B SERIES PRESSURE REGULATORS. ISSUED - JANUARY 1999 CAVMC-0509-US-0208 ISO 9001 Certified
Cash Valve B SERIES REGULATORS ISSUED - JANUARY 1999 CAVMC-09-US-0208 ISO 9001 Certified GENERAL INFORMATION / REGULATORS B SERIES VALVES DESCRIPTION The Cash Valve Series B pressure reducing and regulating
MOTOR SPEED PRODUCT LINE: CAST IRON MAG DRIVE PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
MOTOR SPEED PRODUCT LINE: SERIES 895 Section 1443 Page 1443.1 Issue B TBLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Key...3 Cutaway View & Pump Features...3 Specifications...4
Type 63EG Relief Valve or Backpressure Regulator
Instruction Manual Form 5110 Types 63EG and 1098-63EGR July 2011 Type 63EG Relief Valve or Backpressure Regulator! WARNING Failure to follow these instructions or to properly install and maintain this
Type T205B Balanced Tank Blanketing Regulator
April 2014 Type T205B Balanced Tank Blanketing Regulator Figure 1. Type T205B Balanced Tank Blanketing Regulator Contents Introduction...2 Specifications...2 Features...3 Principle of Operation...3 Installation...4
FLANGED BALL VALVES ASME CLASS 150 & 300
FLNGED BLL VLVES SME CLSS 150 & REDUCED BORE: 1/2 (DN 15 500) SERIES 7000 The Jamesbury polymer-seated flanged ball valves provide industry leading performance and reliability. Offered in a wide variety
type 630r relief Valve
December 2011 type 630r relief Valve W1934 Figure 1. Type 630R Relief Valve Introduction The Type 630R is a general relief valve that is available in NPS 1 and 2 / DN 25 and 50 body sizes. It is frequently
Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
Mark 50 Series. Back Pressure Regulators Mark 50 Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.
Mark 50 Series Self-Operated Back Pressure Regulators The Mark 50 Sliding Gate Back Pressure Regulator is used to regulate upstream pressure at a predetermined setpoint. The spring in the Mark 50 holds
Type 92S Pilot-Operated Steam Regulators
Instruction Manual Form 5234 Type 92S December 2011 Type 92S Pilot-Operated Steam Regulators! Warning Failure to follow these instructions or to properly install and maintain this equipment could result
1541/1543 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 11/2014 Consolidated * Valves 1541/1543 Series Safety Valve Designed for steam and other compressible fluids, these valves are most commonly used in pharmaceutical,
Modular Instrumentation System
www.swagelok.com Modular nstrumentation System Kenmac Series Modular 85 System Provides a standard modular instrumentation interface and mounting system: 2- and 4- valve pressure and differential pressure
VB-9213 Series. Application. Features. Applicable Literature
VB-9213 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Stem Down to Close Two-Way Valves General Instructions pplication VB-9213 series single seat, stem down to close, twoway valves control
Series Low Pressure Steam Heating Boiler Safety Valves
12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle
Table of Contents. Introduction. Description. Greater Total System Efficiency. Improved Design. Easy Installation and Maintenance
Features & Benefits Table of Contents Features & Benefits................................................................ 13900.1 Scope of Design...................................................................
CASH VALVES TYPE G-60 PRESSURE REGULATORS
A self-contained, self-actuated high capacity all purpose regulator designed to operate within close limits FEATURES GENERAL APPLICATION The G-60 is designed for use with steam, water, air, oil, gases,
TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F
TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F Temperature Regulation for Batch Process Storage Heaters (Water, Fuel Oil or Chemical) Air Heating TYPE ET14 TEMPERATURE
MODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL
Installation, Operation and Maintenance Instructions MODEL 5540 Sep 20 CONTENTS.0 GENERAL. Model Number---------------------------------------------------------------------------------------------------------------
197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
CASH VALVES TYPE G-60 HIGH CAPACITY PRESSURE REGULATOR
The Type G-60 is a high capacity all purpose regulator designed to operate within close operating limits. Application Type G-60 regulators are designed for use with steam, water, air, oil, gases, chemicals
TEMPERATURE REGULATORS W91/W94 Series
Self-Operated Temperature Regulators Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company Self-Operating Design Indicating
394C. Series 6400/6600. Safety Valves for Power Boiler Service
394C Series 6400/6600 Safety Valves for Power Boiler Service Series 6400/6600 Designed with the user in mind, Series 6400 and 6600 safety valves represent the most advanced technology in valves designed
RP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves July 2013 W1094_1 Figure 1. Type Y610A or Y610AP Vacuum Breaker Introduction The Y610A, Y611A, and Y612A Series devices (Figures
Type 1290 Vapor Recovery Regulator
Instruction Manual Form 5308 Type 1290 February 2012 Type 1290 Vapor Recovery Regulator! warning Failure to follow these instructions or to properly install and maintain this equipment could result in
PRESSURE REGULATORS PRESSURE REDUCING. APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure
PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure PRESSURE RANGE: Upstream: 10 psig to 300 psig Downstream: 10 psig to 300
Bellows-Sealed Valves
www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
LVG SERIES. Gas Limiting Orifice Valve. Features. Benefits. Combustion Excellence Since 1888 LVG-1
Gas Limiting Orifice Valve Features Precision machined valve flow piston Rugged cast iron body Replaceable cartridge assembly for LVG 55-5 Straight through valve design; right angle valve option Pressure
Type 310A-32A Pressure Reducing Regulator
Bulletin 71.2 D102066X012 Type 310A February 2017 Type 310A-32A Pressure Reducing Regulator Figure 1. Type 310A Regulator with Type 32A Pilot Introduction The Type 310A pilot-operated high-pressure regulator
Type MR108 Direct-Operated Backpressure Regulators
August 2013 Type MR108 Direct-Operated Backpressure Regulators P1202 P1203 TYPE MR108 WITH LOW- ACTUATOR TYPE MR108 WITH HIGH- ACTUATOR Figure 1. Type MR108 Direct-Operated Backpressure Regulators Contents
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic
Fisher Mr95 and Mr98 Series regulators transition Management guide
Transition Management Guide MR95/MR98 Series March 2015 Fisher Mr95 and Mr98 Series regulators transition Management guide P1753 typical Mr95H/Mr98H SerieS P1757 typical Mr95L/Mr98L SerieS Figure 1. Typical
15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
SECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 377 Float Cage / 326L & 322L lever Valves TABLE OF CONTENTS Overview... Cover General Information... Cover Operation... 4 Installation...4-6 Maintenance...
Installation, Operation & Maintenance Instructions
Installation, Operation & Maintenance Instructions 377 Float Cage / 326L & 322L lever Valves TABLE OF CONTENTS Overview... Cover General Information... Cover Operation... 4 Installation...4-6 Maintenance...
* T Temperature-Indicating Dial (Must be field set and calibrated to an actual thermometer)
175/153 Series Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2006 Watson McDaniel Company 175 HEATING 153 COOLING 175 / 153 Screwed Connection
SV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 VF114R1 VF115R1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either
Application: Sanitary Solutions
SANITARY Sanitary regulators are engineered for pressure control in sanitary, or clean environments. The applications include pharmaceutical, biotechnology, food and beverage, cosmetics, chemical and other
Be llows-se aled Valve s
www.swagelok.com Be llows-se aled s B Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections Brass, stainless steel,
T205VB Series Tank Blanketing Vacuum Breakers
February 2014 T205VB Series Tank Blanketing Vacuum Breakers Figure 1. Typical T205VB Series Vacuum Breaker Introduction The T205VB Series vacuum breakers (Figure 1) are used for precise control of small
Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and Differential Pressure Control 2 GE Oil
FLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003
FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 table of contents SC420 Series............. 1-2 SC423XL
Y690A Series Pressure Reducing Regulators
Instruction Manual Form 5463 Y690A Series February 2009 Y690A Series Pressure Reducing Regulators! Warning Fisher regulators must be installed, operated, and maintained in accordance with federal, state,
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
Cast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection
Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic
BOSS Series D Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
W91/W94 Series TEMPERATURE REGULATORS. Self-Operated Temperature Regulators. Design & Operation W91 Non-Indicating W94 Dial Thermometer
Design & Operation W91 Non-Indicating W94 Dial Thermometer Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company CAPILLARY
13900 Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 13900 Series Pilot-Operated Safety Relief Valve Designed specifically for high capacity steam applications, this series of valves contributes
Air/Gas Vents For automatically venting gases from liquids under pressure. Bulletin No. 451-E
ir/gas Vents For automatically venting gases from liquids under pressure. ulletin No. 451-E Selecting The rmstrong ir/gas Vent With the desired CFM capacity known, find the orifice size required from the
VISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst
UNIVERSL PRODUCT LINE: SERIES 724, 4724 Section 1706 Page 1706.1 Issue B TBLE OF CONTENTS Features & Benefits...2 Cutaway View & Pump Features...2 Model Number Key...3 Standard Materials of Construction...3
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
Mark 675 Series. Pressure Regulators Mark 675 Pressure Regulators. Self-Operated Pressure Regulators. Mark 675 Features
Mark 675 Series Self-Operated Pressure Regulators The Mark 675 Wafer Style Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark
BBV Automatic or Manually Actuated Boiler Blowdown Valves DN15 to DN65
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development improvement of the product, we reserve the right to change the specification without
Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features
Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing