STEAM TRAPS. Float and Thermostatic Steam Traps (continued) Series C and X. Dimensions in. (mm)
|
|
|
- Ferdinand Lewis
- 6 years ago
- Views:
Transcription
1 STM TRPS loat and Thermostatic (continued) Series and X or large high capacity units s available: Series : 1 1 /4" NPT and SPT 1 1 /2" NPT and SPT 2" NPT and SPT 2 1 /2" NPT Series X: 2" NPT Resistant to water hammer and corrosion elow condensate level seat design prevents steam leakage Rugged stainless steel thermostatic element eliminates air binding Stainless steel internal components an be serviced without dismantling piping Maximum operating pressure 175 psig (12.1 bar) Maximum temperature 77 (192 ) Series 1 1 /4" &1 1 /2" J rain RIN Materials of onstruction Part Specifications ody and cover ast Iron 0,000 psi tensile Valve Pin and Seat Stainless Steel (ardened) loat Stainless Steel Lever ssembly Stainless Steel Thermostatic ir Vent Stainless Steel age and Thermal lement over olts rade 5 affle Stainless Steel {2 1 2" units only} Series 2" Series 2 1 /2 (65mm) imensions in. (mm) in. 1 1 /4 4 1 /4 (108) 8 5 /16 (211) 8 9 /16 (217) (76) /8 (86) 1 1 /2 4 1 /4 (108) 8 5 /16 (211) 8 9 /16 (217) (76) /8 (86) 2-Std. 7 /16 (18) 10 1 /8 (257) 10 1 /2 (267) 4 15 /16 (79) 2 11 /16 (68) 2-X 10 (254) 15 (81) 15 1 /2 (94) 6 5 /8 (168) 4 /4 (121) 2 1 / /2 (68) 20 1 /4 (514) 17 /8 (441) 9 1 /2 (241) /16 (79) Series X 2" in. J K L 1 1 /4 2 (51) 45 /64 (17.8) 1 /8 (5) 1 1 /2 2 (51) 45 /64 (17.8) 1 /8 (5) 2-Std. 1 /4 (8) 1 /2 (12.7) 1 /8 (.2) 2-X 1 /2 (89) 2 1 /2 6 1 /4 (159) 5 (127) 12 (05) 1 5 /8 (41) 4 1 /2 (114) 7 (178) Series 2 1 /2" Inlet ischarge J Thermostatic Vent K 4-oles, L 17/2" ia. 14
2 Ordering Information To convert previously manufactured offman Specialty & T Trap Model numbers, see page 17. NPT SPT Seat ifferential Pressure ody esign Pressure NPT Model SPT Model Part Part Rating Rating Weight Number* Number in. Number Number psi (bar) psi (bar) lbs. (kg) T (1.0) 175 (12.1) 18 (8) T (1.0) 175 (12.1) (15) T015X (1.0) 175 (12.1) 108 (49) T (1.0) 175 (12.1) 175 (79) T (2.1) 175 (12.1) 18 (8) T (2.1) 175 (12.1) (15) T00X (2.1) 175 (12.1) 108 (49) T (2.1) 175 (12.1) 175 (79) T075-5 T075-5J (5.2) 175 (12.1) 18 (8) T075-6 T075-6J (5.2) 175 (12.1) 18 (8) T075-8 T075-8J (5.2) 175 (12.1) (15) T075X (5.2) 175 (12.1) 108 (49) T (5.2) 175 (12.1) 175 (79) T125-5 T125-5J (8.6) 175 (12.1) 18 (8) T125-6 T125-6J (8.6) 175 (12.1) 18 (8) T125-8 T125-8J (8.6) 175 (12.1) (15) T125X (8.6) 175 (12.1) 108 (49) T (8.6) 175 (12.1) 175 (79) T (12.1) 175 (12.1) 18 (8) T (12.1) 175 (12.1) 18 (8) T (12.1) 175 (12.1) (15) T175X (12.1) 175 (12.1) 105 (49) T (12.1) 175 (12.1) 175 (79) Series and X ompetitive imensional omparison of istance etween Inlet and Outlet Pipes of Traps with Tappings in the over imensions in. (mm) Manufacturer/Model 1 1 /2" offman T015-6 (76) 2 /2 (18) Spirax T15 (76) 2 /2 (18) offman T /16 (124) 1/8 () 2" Mepco/unham ush /8 (16) 1 1 /2 (8) Spirax T /16 (124) 1 /8 (8) offman T015X /8 (168) 0 2" rmstrong 15-J8 6 5 /8 (168) 0 Mepco/unham ush S /8 (175) 1 /8 (5) Spirax T /2 (114) 1 /2 (1) offman T /2 (241) /2" rmstrong 0-L /16 (287) 0 Mepco/unham ush S /4 (1) 1 1 /2 (8) Spirax T /4 (184) 1 7 /16 (6) rain 15
3 loat and Thermostatic (continued) apacities (Series and X) etermine the differential pressure across the trap (inlet pressure - outlet pressure). On applications where the steam is controlled by a modulating temperature regulator, the trap differential should be 1/2 psi (0.4 bar). etermine the capacity based on the differential pressure and the required capacity of the trap to open against the maximum inlet steam pressure. pply a Safety actor by multiplying required capacity by 1.5. apacities (ross Ratings) Model T015-6 T015-8 T015X-8 T T00-6 T00-8 T00X-8 T00-10 T075-5 T075-6 T075-8 T075X-8 T T125-5 T125-6 T125-8 T125X-8 T T175-5 T175-6 T175-8 T175X-8 T in. Pressure ifferential in Pounds Per Square Inch (bar) Orifice 1/4 1/ in. (0.017) (0.05) (0.07) (0.14) (0.5) (0.69) (1.0) (1.4) (1.69) (2.1) (2.8) (.5) (4.2) (5.2) (6.9) (8.6) (10.4) (12.1) (mm) apacities in Pounds of ondensate Per our (kg/hr.) 1 1/ (12.7) (500) (770) (1090) (1500) (2270) (000) (450) ,900 (17.4) (104) (1270) (160) (2110) (10) (4080) (4948) ,800 15,500 20,900 24,000 (24.6) (2950) (628) (410) (4900) (700) (9480) (10,885) 2 1/ ,000 20,000 27,000 6,000 46,000 55,000 60,000 (47.6) (7710) (9070) (12,250) (16,0) (20,865) (24,950)(27,210) 1 1/ (10) (450) (590) (770) (1040) (1540) (2085) (2495) (2720) (2995) (178) ,200 11,100 12,000 (14) (771) (114) (1406) (1859) (260) (470) (4082) (4626) (504) (544) ,500 16,900 19,000 21,500 2,500 24,000 (22) (154) (2088) (2905) (81) (5675) (7672) (8626) (9761) (10,669) (10,896) 2 1/ ,000 17,000 20,900 25,500,200 40,500 45,500 49,400 52,700 55,600 (41) (656) (7718) (9488) (11,577) (15,072) (18,87) (20,657)(22,427) (2,925) (25,242) 1 1/ (8) (272) (6) (470) (640) (1000) (1405) (1725) (1860) (2040) (210) (2270) (2400) (2500) (2675) 1 1/ (8) (272) (6) (470) (640) (1000) (1405) (1725) (1860) (2040) (210) (2270) (2400) (2500) (2675) (10) (45) (612) (771) (975) (18) (162) (1950) (2199) (2449) (260) (299) (265) (560) (855) ,400 11,400 12,500 1,500 14,250 15,600 17,150 18,600 20,500 (15) (1156) (1428) (190) (2472) (447) (4717) (5171) (5670) (512) (646) (7076) (7779) (846) (9298) 2 1/ ,000 1,000 18,600 24,200 28,00 1,600 4,400 6,800 41,100 44,800 48,040 52,00 (26) (2676) (492) (456) (5896) (846) (10,977) (12,86) (14,) (15,60) (16,692) (18,642) (20,21) (21,790) (2,72) 1 1/ (6.2) (195) (245) (20) (425) (65) (820) (1000) (1065) (1180) (1270) (140) (1540) (1590) (1750) (2000) (2180) 1 1/ (6.2) (195) (245) (20) (425) (65) (820) (1000) (1065) (1180) (1270) (140) (1540) (1590) (1750) (2000) (2180) (7) (1) (408) (55) (657) (907) (1179) (1406) (1610) (1769) (1927) (2199) (2426) (265) (2925) () (696) ,50 11,950 1,400 15,600 18,850 21,800 (11) (104) (1270) (1564) (1905) (2472) (299) (79) (651) (900) (4059) (4694) (5420) (6078) (7076) (8550) (9888) 2 1/ ,000 17,100 20,000 22,400 24,500 26,00 29,400 2,100 4,650 7,600 42,100 46,000 (20) (1814) (2404) (129) (4127) (5896) (7756) (9072) (10,160)(11,11) (11,929) (1,5)(14,560)(15,717) (17,055) (19,096) (20,865) 1 1/ (5.) (120) (160) (220) (290) (425) (540) (660) (710) (760) (790) (865) (925) (950) (1040) (115) (115) (1425) (1470) 1 1/ (5.) (120) (160) (220) (290) (425) (540) (660) (710) (760) (790) (865) (925) (950) (1040) (115) (115) (1425) (1470) (6) (25) (299) (71) (476) (657) (89) (1020) (1179) (115) (1406) (162) (187) (1995) (2177) (2540) (285) (084) (402) ,000 1,000 14,750 16,500 18,000 (10) (95) (1180) (162) (1589) (1997) (2224) (2428) (26) (287) (041) (450) (904) (45) (4994) (5902) (6696) (7491) (8172) 2 1/ ,800 15,400 17,500 19,00 21,000 2,800 26,00 28,060 1,600 5,900 9,700 4,100 46,200 (17) (1116) (1520) (2088) (2814) (4267) (5811) (6991) (7945) (8762) (954) (10,805) (11,940)(12,79) (14,46) (16,298) (18,02)(19,567) (20,974) 16
4 onversion of Previously Manufactured offman Specialty Models to urrent Model Numbers Previously Manufactured urrent Model NPT Part NPT Part Model No. in. Number Model No. in. Number Remarks T Revised design T Revised design T Revised design T No design change on this unit T No design change on this unit None T New addition to line None T New addition to line None T015X New addition to line None T New addition to line T Revised design T Revised design T No design change on this unit T No design change on this unit T Revised design T hanged to cover inlet design T hanged to cover inlet design T No design change on this unit T Revised design T hanged to cover inlet design T hanged to cover inlet design T No design change on this unit T Revised design T hanged to cover inlet design T hanged to cover inlet design T No design change on this unit T Revised design T Revised design T hanged to cover inlet design T00X No design change on this unit T No design change on this unit T Revised design T Revised design T hanged to cover inlet design T075X No design change on this unit T No design change on this unit T Revised design T Revised design T hanged to cover inlet design T125X No design change on this unit T No design change on this unit T Revised design T Revised design T hanged to cover inlet design T175X No design change on this unit T No design change on this unit urrent Model number designation code example: Model Seat Pressure Series T
5 loat and Thermostatic (continued) over ssemblies for Spirax Sarco loat & Thermostatic Spirax offman Sarco &T Trap Specialty over Model Pressure ssembly* Number psi (bar) in. Part Number T15 15 (1.1) T0 0 (2.1) T75 75 (5.) T (8.8) * over assembly includes cover casting, all internal components, and cover gasket. over ssembly 18
Hoffman Specialty General Catalog
Hoffman Specialty General Catalog HS-900G ESP-PLUSTM For computer aided selection of Steam Trap and Regulators, please refer to the Steam Specialty Component Selectors at http://bellgossett.com/selectionsizing-cad-tools/
STEAM TRAPS. Inverted Bucket Steam Traps (continued) Series B. Dimensions in. (mm)
X X X X X X X X X X X X X X TEMP. PRESS. PRESS OFF TEMP. PRESS. PRESS OFF DATE CODE Hoffman ITT DATE CODE Hoffman ITT STEAM TRAPS Inverted Bucket (continued) 3 Available in sizes 3 4" and 1" NPT and BSPT
SV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
FT47 SG Iron Ball Float Steam Traps (DN15 to DN50)
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Separators for steam, air and gas systems
Separators for steam, air and gas systems Protect your investment in process plant and pipeline products whilst increasing productivity Heat transfer applications Water is an extremely effective barrier
D I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
Best Under Pressure 3500 EBV. Safety Valve Oct 2008-CO
est Under Pressure 300 EV Safety Valve www.dresser.com 300 Oct 2008-CO 742 resser 300.qxd 9/29/0 8:10 AM Page 1 300 Scope of esign The CONSOIATE Series 300 Electromatic all Valve is designed to provide
SCA Series Steel Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
AIR/VACUUM VALVE AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION
AIR/VACUUM AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION Scope. This specification is intended to cover the design, manufacture, and testing of / in. (3 mm) through 0 in. (00 mm) Air/Vacuum Valves suitable
P95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
Hoffman Specialty Service Parts Catalog PARTS LIST HS-800C
Hoffman Specialty Service Parts Catalog PARTS LIST HS-800C Hoffman Specialty Table of Contents STEAM TRAPS FLOAT AND THERMOSTATIC SERIES PAGE INVERTED BUCKET SERIES PAGE C 6 B0 H B I B X 6 B 6 8 B 6 0
PRODUCT: SERIES DESCRIPTION PAGE TRAPS
PRICE SHEET HS-113 Effective January 14, 2013 Replaces Price Sheet HS-112 Dated January 30, 2012 These prices are subject to change without notice. All shipments will be billed at the price in effect at
3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators
lectric, Hydraulic, and Pneumatic ctuators TL 1. Select Valve ody including P ode (Valve Size, v Rating, Port ode) or select Valve ssemly correct (refer to Tale 3 and Tale 3 also) less ctuator ode (XXX)
One & Two Stage Turbine Type Pumps
0A Series APO One & Two Stage Turbine Type Pumps apacities to 0 GPM Heads to 700 Feet Temperatures to 7 F Standard Bronze fitted construction Hydraulically balanced bronze impeller Right- or left-hand
Instrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
DFR Valve Actuator. Features. Model
Features Reliable esign The low-pressure diaphragm, fail-safe spring, and splined connection make for accurate and safe operation. Rugged Long Lasting Construction yna-flo s expert CNC machining process
Vacuum Relief Performance Curves
Vacuum Relief Valves Crispin Vacuum Relief Valves Valve Function llows air to enter system when vacuum occurs Prevents air exhaustion during pump start-up Features Cracks open to admit air at.25 PSIG differential
Series 36-WW COMBINATION AIR VALVES DATA AND SIZING WASTEWATER SERVICE. (Single Body Style) Installation. Specifications. Purchase Specification
Series -WW COMINTION IR S DT ND SIZING WSTEWTER SERVICE (Single ody Style) Stainless Steel T Trim Standard Stainless Steel Floats Guaranteed Fully Ported s - No Restrictions Engineered For Drip Tight Seal
CSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1
Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1
Your Global Source for Today s Most Popular Solenoid Valves
lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves, a division of International
STEAM INJECTION HUMIDIFIER LIVESTEAM. Submittal Drawings
STEAM INJETION HUMIDIFIER LIVESTEAM Submittal Drawings Date: Job Name: ontractor: ontractor or Order No.: Engineer: Agent: Agent P.O. No.: Date Ordered: Date Required: U.S.A. 2207 90th St., Sturtevant,
DRV4 and DRV4G Cast Steel Pressure Reducing Valves
Local regulations may restrict the use of this product to below the conditions quoted. n the interests of development and improvement of the product, we reserve the right to change the specification without
High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
Applications. T98H Part Matrix. Specifications. Spring Range. Materials of Construction. T98H Regulator Rebuild Kits. marshbellofram.
TH Back Regulator / Valve The TH monitors upstream pressure and opens to relieve excess pressure increases above setpoint. s a Back Regulator, the upstream pressure is monitored and released downstream
DRV7 and DRV7G SG Iron Pressure Reducing Valves
Local regulations may restrict the use of this product to below the conditions quoted. n the interests of development and improvement of the product, we reserve the right to change the specification without
Modulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
Winslow Lube Oil Full-Flow Type 1 Filter Service Instructions
Vent Plug (NPT) Winslow Lube Oil ull-low Type 1 ilter Service Instructions Parts List Part escription Part over ssembly and lamp Housing rain Plug ilter lement omponent Kit See Ordering Information on
DEP7 SG Iron Excess Pressure Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
F20 & F21 QIX Particulate & Coalescing Filters
F2, F21 Series QIX Filters 1/4, 3/8, 1/2, 3/4 & 1 Inch Ports F2 & F21 QIX Particulate & oalescing Filters Manual rain utomatic rain Unique Interchangeable QIX Inserts llow One Module to ccommodate Port
Air/Gas Vents For automatically venting gases from liquids under pressure. Bulletin No. 451-E
ir/gas Vents For automatically venting gases from liquids under pressure. ulletin No. 451-E Selecting The rmstrong ir/gas Vent With the desired CFM capacity known, find the orifice size required from the
HD Series. Pilot-Operated Regulating Valves. HD Series features & benefits
Watson McDaniel reserves the right to change the designs and/or materials of its products out notice. 2004 Watson McDaniel Company features & benefits Ductile Iron body for higher pressures Full port strainer
The Pivotrol Pump Patented Selection and Sizing
How to Select and Size From the inlet pressure, back pressure and filling head conditions given below, select the pump size and check valve package which meets the capacity requirement of the application.
Bellows-sealed Valves
ellows-sealed Valves ellows-sealed Valves V-64 SVH Series High Pressure ellows-sealed Valves Features Packless valves with all-metal seal to atmosphere ompact designed body with minimal dead space 16 SS
A. Provide all HVAC specialties required to complete the installation of all HVAC systems. B. Manufacturers: Refer to individual product item.
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 02 PART 1 GENERAL 1.01 DESCRIPTION A. Provide all HVAC specialties required to complete the installation of all HVAC systems.
Stainless Steel Trim Standard. ir and Vacuum Sewer Valves permit a large volume of air to
ir and Vacuum Sewer Valves Valve Functio n Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable in sizes thru 10 ll
Throttle Modules / Throttle and Check Modules
FLOW CONTROLS Used as pilot choke valves for solenoid controlled pilot operated directional valves and pilot operated directional valves. Graphic Symbols Valve Size 3 Standard Type P AB T TCG- P A B T
Technical Data TYPE A SERIES AIR ADJUSTED PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4011 OPERATING PRINCIPLE
Technical Data SD 4011 SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 TYPE A SERIES AIR ADJUSTED PILOT PRINTED IN U.S.A. SD 4011/9504 Type A or A83 (wt 6 lb) Type A53 or A 85
CAST IRON THREADED FITTINGS
q IGUR 59 Size lack NPS N NPS N NPS N in mm in mm in mm in mm in mm in mm lbs kg /4 8 /6 7 /6 7 /6 22 /8 29 /8 29 /8 29 0.57 0.26 /2 5 /2 5 /8 0 /6 7 /6 7 /4 9 /8 29 /8 29 /8 29 0.57 0.26 /4 20 /6 22 /6
RS Series. Three way rotary valves for temperature control systems
RS Series Three way rotary valves for temperature control systems R S RS Three way rotary valve for temperature control systems RS 3-way rotary valve for temperature control systems High Efficiency Mixing
MIS SERIES. Mist Eliminator. Installed differential pressure gauge and optional zero air-loss drain valve. Air or Water Cooled Aftercooler
MIS SERIES Mist Eliminator The ircel MIS Mist Eliminator (300-8000 scfm) provides a full line of mist eliminators to effectively remove oil, solids and water from your compressed air system. In addition,
Model B. Thermostatic Valves FEATURES APPLICATIONS FLOW RATES OF USGPM TAMPER-PROOF TEMPERATURE SETTINGS OF 55 F F
Model Thermostatic Valves FETURES FLOW RTES OF 68-1200 USGPM TMPER-PROOF TEMPERTURE SETTINGS OF 55 F - 240 F OMPLETELY SELF-ONTINED POSITIVE 3-WY VLVE TION VILLE IN ST IRON, DUTILE IRON, RONZE, STEEL,
Resilient Seat Butterfly Valve with Electric Actuator Two-Way and Three-Way
Resilient Seat utterfly with Electric ctuator ocument o. 15-030 escription utterfly assemblies provide excellent flow control of hot water, chilled water, condenser water, thermal storage systems, and
MK Series High Performance Butterfly Submittal/Technical Data
MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas 77041
W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection
Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2
VB-9313 Series. Application. Features. Applicable Literature
V-9313 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Three-Way Mixing s General Instructions pplication V-9313 series three-way mixing valves control hot or chilled water in heating or
Electronic Temperature Control & Bulb Well Assembly (AC)
Electronic Temperature ontrol & ulb Well ssembly () 0916 86816 This is a line voltage single-stage electronic temperature control with singlepole, double-throw relay output and LED indication. It is designed
Tilting Disc Check Valve
Figures 123 123½ Tilting heck Valve lass 150 olted ap Figure 123 Figure 123½ utt Weld 2 through 36 inches (50-900 mm) STM 216 Grade W 285 psi @ -20 F to 100 F (20 bar @ -28 to 37 ) of onstruction* Inlet
Temperature Sensors. How to Order Consult factory for pricing and lead time. Normally Open (Closed on temperature rise)
Temperature Sensors 0916 Normally Open (losed on temperature rise) ontact Rating 6 MPS T 120 V 4 MPS T 240 V Voltage 0.1 to 240 volts or 12 VD 8 MPS, 24 VD 4 MPS Pressure 1,000 PSI operating Material 303
PDE2611TCUK-ca Air Preparation. Miniature FRL series. Miniature FRL Series. Parker Hannifin Corporation Pneumatic Division - Europe
P26TUK-ca ir Preparation Miniature RL series Miniature RL Series 49 Parker Hannifin orporation Pneumatic ivision - urope P26TUK-ca ir Preparation Miniature RL series - /8", /4" asic /8" ody 4 ilters -
HELICAL BEVEL DRIVES K-1
K ELIAL EVEL RIVES elical evel Product eatures......................................k1 to K3 Selection Procedure............................................ K4 to K5 escriptions.....................................................
S and SF Series Cast Iron Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Smith Meter Truck Meter Packages Specifications
Issue/Rev. 0.4 (8/12) P Meter Smith Meter Truck Meter Packages Specifications ulletin SS01095 TP (Ticket Printer) LN (Large Numeral ounter) Preset ounter Air Eliminator/ Strainer Faucet P Meter Smith Meter
ELD Series - DC Motor Drive
ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended
P630 High Flow Gas Regulator
High Flow Gas Regulator Stainless Steel Internals are Standard Steel Units comply with NACE MR0175 Durable Powder Coated Exterior Wide of Flow Capacities The is a spring loaded, direct-operated regulator
TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F
TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F Temperature Regulation for Batch Process Storage Heaters (Water, Fuel Oil or Chemical) Air Heating TYPE ET14 TEMPERATURE
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high pressure systems. These regulators can be used with natural
Technical Data TYPE T124 & T134 TEMPERATURE PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4512A
WATTS INDUSTRIES, INC. Technical Data SD 4512A SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 PRINTED IN U.S.A. SD 4512A/9806 T124/T134 PILOT FRONT VIEW 2 1 /16 F 5 7 /8 2 3
Fisher Mr95 and Mr98 Series regulators transition Management guide
Transition Management Guide MR95/MR98 Series March 2015 Fisher Mr95 and Mr98 Series regulators transition Management guide P1753 typical Mr95H/Mr98H SerieS P1757 typical Mr95L/Mr98L SerieS Figure 1. Typical
Two port valves. pneumatically actuated
Two port valves pneumatically actuated One valve - The Spirax Sarco range of KE valves and PN5000 and PN6000 pneumatic actuators are designed to give a comprehensive selection of control valves for use
Power Take-Off Clutches
IST. UTORIZO Power Take-Off lutches Superior torque control for heavy duty diesel engines Wichita has instituted quality assurance procedures aimed at achieving the ultimate in product reliability and
VB-9313 Series. Application. Features. Applicable Literature
V-9313 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Three-Way Mixing s General Instructions pplication V-9313 series three-way mixing valves control hot or chilled water in heating or
Tension Brakes/High Heat Capacity
IST. UTORIZO Tension rakes/igh eat apacity MX (55) 53 63 23 31 Steel Water ooled rakes ost effective design One piece water jacket eliminates leakage Release springs ensure complete disengagement New friction
MFP14, MFP14S and MFP14SS Automatic Pumps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Winslow Lube Oil By-Pass Type 1 Filter Service Instructions
Vent Plug (NPT) Winslow Lube Oil y-pass Type 1 ilter Service Instructions Parts List Part escription Part over ssembly and lamp Housing rain Plug ilter lement omponent Kit See Ordering Information on Page
F6100HD, 4, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc
6100H, 4, 2-Way utterfly Valve Resilient Seat, 304 Stainless Steel isc pplication Valve is designed for use in NSI flanged piping systems to meet the needs of bi-directional high flow HV hydronic applications
Presentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508
Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:
Industrial Refrigeration Control Valves
limate& Industrial ontrols Industrial Refrigeration ontrol Valves Refrigerating Specialties ivision ased on over 75 years of experience in industrial refrigeration, the Refrigerating Specialties ivision
Air and Vacuum Sewer Valves. Stainless Steel Trim Standard. Short Air & Vacuum Sewer Series
ir and Vacuum Sewer Valves ir and Vacuum Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable
TYPE E Main Valve Sizes 3 /8 through 12
Technical Data SD 3001E PRINTED IN U.S.A. SD 3001E/9709 SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 A B TYPE E MAIN VALVE FACE TO FACE DIMENSIONS C D E DIMENSIONS (inches)
P600 Pressure Regulator
P600 Pressure Regulator The BelGAS P600 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
F6100HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc
6100H, 2-Way utterfly Valve Resilient Seat, 304 Stainless Steel isc Product eatures 200 psi (2 to 12 ) and 150 psi (14 to 24 ) 0% leakage, Long stem design allows for 2 insulation, Valve face-to-face dimensions
PG-HHS
www.watts.com PG-HHS Watts Quality Sets the Standard in Hydronics With Watts hydronic products, you get longer valve life, economical control of heating and cooling zones, energy savings for your customers
3. Installation and Commissioning 4. Maintenance 5. Spares
INSTLLTION ND MINTENNCE INSTRUCTIONS IM-P305-06 US November 2003 1/2" to 4" (DN15 to DN100) KE41, 43, 61, 63, 71 and 73 NSI Control Valves 1. Safety 2. Technical details 3. Installation and Commissioning
Size Range: Body Material: Features:
C O O SVF Flow Controls I N C O R P O R A T E 13560 Larwin Circle Santa Fe Springs, CA 90670 800.783.7836 Fax: 562.802.3114 Sales@SVF.net www.svf.net SERIES 41, 41 & 42 FLANGE ALL VALVES API 607 4T EITION
Max. Reversed Free Flow L/min
These Valves are the combination of flow control valve, a deceleration valve and a check valve and used mainly for controlling rapid traverse and feed cycle in machine tools. Switching from rapid traverse
G780, 3-Way, Mixing Flanged Globe Valve
G780, 3-Way, Mixing langed Globe Valve pplication This valve is typically used in large ir Handling Units (HU) on heating or cooling coils. This valve is suitable for use in a hydronic system with variable
FRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
Pneumatic. Prep-Air II 05 Series Air Preparation Units Filter, Regulator, Lubricator, and Modular Accessories Catalog 0708/USA
Prep-ir II 5 Series ir Preparation Units Filter, Regulator, Lubricator, and Modular ccessories atalog 78/US WRNING FILUR OR IMPROPR SLTION OR IMPROPR US OF TH PROUTS N/OR SYSTMS SRI HRIN OR RLT ITMS N
TN2000 Series Pneumatic Piston Actuators for 6" and 8" SPIRA-TROL Series Control Valves
Description The TN2000 series pneumatic piston actuators are designed for use with 6" and 8" SPIRA-TROL control valves. There are three versions available: Single-acting (with spring), Double-acting (with
MagHex Fan Controller
MagHex Fan ontroller 0916 ompact Programmable Temperature Sensor This combined sensor and controller is designed to mount directly to the heat exchanger. It provides accurate temperature control by cycling
Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications
Bulletin 71.1 D103087X012 Type HSR December 2017 Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications High Capacity Compact Design P1524_1 High Capacity Internal
G765, 3-Way, Mixing Flanged Globe Valve
pplication This valve is typically used in large ir Handling Units (HU) on heating or cooling coils. This valve is suitable for use in a hydronic system with variable flow. Suitable ctuators Non-Spring
LX SERIES Low-Pressure Gas Compressors
70 to 140 psi Inlet Pressure Pressure 1500 PSI 70 80 90 100 110 120 130 140 C1.5-03-70/140LX 3 3.3 3.9 4.4 4.8 5.1 5.6 6.1 6.6 C1.5-05-70/140LX 5 5.4 6.3 7.2 7.8 8.4 9.1 10.0 10.7 C1.5-10-70/140LX 10 10.2
Armstrong Double Duty 6 Steam Trap/Pump Combination Installation and Maintenance
Armstrong Double Duty 6 Steam Trap/Pump Combination Installation and Maintenance 119 Overview Warning: This bulletin should be used by experienced personnel as a guide to the installation and maintenance
Mosherflo-ST, SU, and STX Self-Priming Pumps
Mosherflo-ST, SU, and STX Self-Priming Pumps 8-339-338 pumps@rbmosherco.com Physical Address: 9 FM 7 San Leon, TX 7739 Mailing Address: Drawer - A Dickinson, TX 7739 www.rbmosherco.com ST & SU Parts List
G Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
CONDENSING GAS BOILER Models 075 & 100
ONDENSING GS OILER Models 075 & 100 PRTS, KITS & OPTIONL ESSORIES Ordering Instructions Order Parts through your nearest supplier. When ordering parts, obtain Model Number and Serial Number from data plate
APCO CVS-6000/6000A SWING CHECK VALVES
ULLTIN 00/579 JUN 2016 PO S-00/00 SING K LS PO S Swing heck s are recommended for clean and dirty services such as ater, Sewage or Industrial applications. S-00/00 Swing heck s are a heavily constructed,
April 2007 / BULLETIN Solenoid Valves. The right solenoid valve for any job.
pril 2007 / BULLETIN 30-10 Solenoid Valves The right solenoid valve for any job. Bulletin 30-10 / Page 1 Sporlan Solenoid Valves Benefits Molded coil for most sizes. lass "F" temperature rating oil types
WALL MOUNTED GAS BOILER. Models OLSSC-050 OLSSC-075 OLSSC-100 OLSSC-150 OLSSC-200 PARTS, KITS & OPTIONAL ACCESSORIES
Models OLSS-050 OLSS-075 OLSS-100 OLSS-150 OLSS-200 WLL MOUNTED GS OILER PRTS, KITS & OPTIONL ESSORIES H n ISO 9001-2008 ertified ompany 2201 Dwyer venue, Utica NY 13504-4729 web site: www.ecrinternational.com
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
Pressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
Installation, Maintenance & Operating Instructions
-SS VVS nstallation, aintenance & Operating nstructions - SS VVS TO The ulflo -Series feature both direct acting and internal pilot operated models with either screw or flange type connections. The threaded
Metal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
WALL MOUNTED GAS BOILER. Models UBSSC-050 UBSSC-075 UBSSC-100 UBSSC-150 UBSSC-200 PARTS, KITS & OPTIONAL ACCESSORIES
Models USS-050 USS-075 USS-100 USS-150 USS-200 WLL MOUNTED GS OILER PRTS, KITS & OPTIONL ESSORIES H n ISO 9001-2008 ertified ompany 2201 Dwyer venue, Utica NY 13504-4729 web site: www.ecrinternational.com
LT36607 Winslow Depth Filters. Winslow Depth Filters
LT36607 Winslow epth ilters Winslow epth ilters Winslow Lube Oil ilters...............................4-3 Introduction.................................... 4-4 Selecting a Lube Oil ilter.........................
Mechanical Style Pressure Switch. Specifications
or details about certified products conforming to international standards, visit us at www.smcworld.com. Mechanical Style Pressure Switch Series IS1000 Long service life: 5 million cycles IS1000-01 IS1000-01-X202
UNA 13 UNA 15 UNA 15 Stainless Steel Design. Installation Instructions Steam Traps UNA 13, UNA 15
UNA 13 UNA 15 UNA 15 Stainless Steel Design Installation Instructions 810604-01 Steam Traps UNA 13, UNA 15 1 Contents Important Notes Page Use... 7 Safety note... 7 Danger... 7 Explanatory Notes Scope