CO 2. High Pressure Design. (> 500 psi per API 15HR & 15S) Design Life - 20 years at full rating

Size: px
Start display at page:

Download "CO 2. High Pressure Design. (> 500 psi per API 15HR & 15S) Design Life - 20 years at full rating"

Transcription

1 Fiberspar Line Pipe (High Pressure - Product Data) OIL & GAS MINING Applications Pipeline Rehabilitation Production Lines or Injection Lines Transfer Lines or Disposal Lines Oil, Gas, Saltwater CO 2 and Sour Services Product Description Sizes - 2 through 6½ inches Pressure - Up to 3,500 psi (24,1 MPa) E = High - density polyethylene (HDPE) to 140 F (60 C) X = High - temperature polyethylene to 180 F (82 C) XT = High - temperature polyethylene to 203 F (95 C) Structual Resin System - Anhydride Cured Epoxy Reinforcement - Premium Fiberglass (E-Glass) Joining Systems - Compression Slip Connectors Joint Length - Up to 9,000 Ft High Pressure Design (> 500 psi per API 15HR & 15S) Design Life - 20 years at full rating Hoop Stress - 95% Lower Confidence Limit (LCL of Long Term Hydrostatic Strength according to ASTM D2992-B - 32,600 psi. Design Stress - 21,840 psi. All products are factory hydro tested to 1.5 times the maximum pressure design Recommended field test pressure is 1.1 to 1.25 times the maximum operating pressure Benefits Corrosion Control Reduced Installation Costs Improved Flow Efficiency Reduced Paraffin & Scale Build-Up Reduced Maintenance Cost Joining System Weld Prep - Suitable for welding to existing steel lines Welded on Flange - 300, 600 or 1500 Series ANSI Flanges (shown above). Other standard flange drillings available for special order Threaded - NPT or 8 Round EUE pin or box or API Line Pipe Thread Custom end-preps are available on request Fiberspar Connectors are available in: Carbon Steel with Electro less Nickel Coated (ENC) per ASTM B733 Coated Carbon Steel with Stainless Steel wetted surface (Pipe to Pipe only) 316L SS Stainless Steel Other Corrosion Resistant Alloys (CRA) available upon request All Carbon Steel connectors are coated for corrosion protection suitable for harsh oilfield environments View of Joint Illustrations Pipe-to-Pipe Connector Service-End Connector

2 2 Fiberspar Line Pipe High Pressure Product Data E Series Series psi (3,4 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS (E) , , (C) FS LPS (E) , , (C) FS LPS 6 ½ 500 (E) , , (C) s per Series psi (5,2 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS (E) , , (B) FS LPS (E) , , (C) FS LPS (E) , , (C) FS LPS (E) , , (C) FS LPS 6 ½ 750 (E) , , (C) s per Series psi (7,9 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 1,100 (E) , , (A) FS LPS 2 ½ 1,100 (E) , , (B) FS LPS 3 1,100 (E) , , (B) FS LPS 3 ½ 1,100 (E) , , (B) FS LPS 4 1,100 (E) , , (C) FS LPS 5 1,100 (E) , , (C) FS LPS 6 1,100 (E) , , (C) FS LPS 6 ½ 1,100 (E) , , (C) Series psi (10,3 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 1,500 (E) , , (A) FS LPS 2 ½ 1,500 (E) , , (B) FS LPS 3 1,500 (E) , , (A) FS LPS 3 ½ 1,500 (E) , , (B) FS LPS 4 1,500 (E) , , (C) FS LPS 5 1,500 (E) , , (C) FS LPS 6 1,500 (E) , , (C) FS LPS 6 ½ 1,500 (E) , , (C) s per s per

3 Fiberspar Line Pipe High Pressure Product Data 3 E Series Continued Series psi (15,5 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 2,250 (E) , , (A) FS LPS 2 ½ 2,250 (E) , , (B) FS LPS 3 2,250 (E) , , (A) FS LPS 3 ½ 2,250 (E) , , (C) FS LPS 4 2,250 (E) , , (C) FS LPS 5 2,250 (E) , , (C) Series psi (19,0 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 2,750 (E) , , (A) FS LPS 2 ½ 2,750 E (E) , , (A) FS LPS 3 2,750 (E) , , (B) FS LPS 3 ½ 2,750 (E) , , (C) FS LPS 4 2,750 E , , (C) s per s per Series psi (24,1 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 3,500 (E) , , (A) FS LPS 2 ½ 3,500 (E) , , (A) FS LPS 3 3,500 (E) , , (B) s per (1) Maximum Pressure Rating is for non-cyclic, water service. API 15S pressure ratings for hydrocarbon and gas service can be calculated by applying an additional safety factor of 0.8 for hydrocarbon and 0.67 for gas. If customers elects to use other safety factors, consult NOV Fiber Glass Systems. For other applications, consult NOV Fiber Glass Systems engineering. E = High - density polyethylene (HDPE) rated from -29 F to 140 F ( 34 C to 60 C) X = High - temperature polyethylene (HTP) rated from -29 F to 180 F ( 34 C to 82 C) XT = High - temperature polyethylene to -29 F to 203 F ( 34 C to 95 C) Size: (A) = 12 feet (B) = 14 feet (C) = 16 feet * Number of s per Truck is based on USA DOT regulations. All products are hydrotested to 1.5 times maximum recommended operating pressure. Material selection is based on the desired operating temperature and chemical compatibility of Fiberspar LinePipe constituents with fluids. Recommended field test pressure is 1.1 to 1.25 times the maximum operating pressure of the system.

4 4 Fiberspar Line Pipe High Pressure Product Data X Series Series psi (3,2 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS (X) , , (C) FS LPS (X) , , (C) FS LPS 6 ½ 500 (X) , , (C) Series psi (4,8 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS (X) , , (B) FS LPS (X) , , (C) FS LPS (X) , , (C) FS LPS (X) , , (C) FS LPS 6 ½ 750 (X) , , (C) s per s per Series psi (7,6 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 1,100 (X) , , (A) FS LPS 2 ½ 1,100 (X) , , (B) FS LPS 3 1,100 (X) , , (B) FS LPS 3 ½ 1,100 (X) , , (B) FS LPS 4 1,100 (X) , , (C) FS LPS 5 1,100 (X) , , (C) FS LPS 6 1,100 (X) , , (C) FS LPS 6 ½ 1,100 (X) , , (C) Series psi (9,7 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 1,500 (X) , , (A) FS LPS 2 ½ 1,500 (X) , , (B) FS LPS 3 1,500 (X) , , (A) FS LPS 3 ½ 1,500 (X) , , (B) FS LPS 4 1,500 (X) , , (C) FS LPS 5 1,500 (X) , , (C) FS LPS 6 1,500 (X) , , (C) FS LPS 6 ½ 1,500 (X) , , (C) s per s per

5 Fiberspar Line Pipe High Pressure Product Data 5 X Series Continued Series psi (15,5 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 2,250 (X) , , (A) FS LPS 2 ½ 2,250 (X) , , (B) FS LPS 3 2,250 (X) , , (A) FS LPS 3 ½ 2,250 (X) , , (C) FS LPS 4 2,250 (X) , , (C) FS LPS 5 2,250 (X) , , (C) s per Series psi (17,9 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 2,750 (X) , , (A) FS LPS 2 ½ 2,750 (X) , , (A) FS LPS 3 2,750 (X) , , (B) FS LPS 3 ½ 2,750 (X) , , (A) FS LPS 4 2,750 (X) , , (A) s per Series psi (22,8 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 3,500 (X) , , (A) FS LPS 2 ½ 3,500 (X) , , (A) FS LPS 3 3,500 (X) , , (B) s per (1) Maximum Pressure Rating is for non-cyclic, water service. API 15S pressure ratings for hydrocarbon and gas service can be calculated by applying an additional safety factor of 0.8 for hydrocarbon and 0.67 for gas. If customers elects to use other safety factors, consult NOV Fiber Glass Systems. For other applications, consult NOV Fiber Glass Systems engineering. E = High - density polyethylene (HDPE) rated from -29 F to 140 F ( 34 C to 60 C) X = High - temperature polyethylene (HTP) rated from -29 F to 180 F ( 34 C to 82 C) XT = High - temperature polyethylene to -29 F to 203 F ( 34 C to 95 C) Size: (A) = 12 feet (B) = 14 feet (C) = 16 feet * Number of s per Truck is based on USA DOT regulations. All products are hydrotested to 1.5 times maximum recommended operating pressure. Material selection is based on the desired operating temperature and chemical compatibility of Fiberspar LinePipe constituents with fluids. Recommended field test pressure is 1.1 to 1.25 times the maximum operating pressure of the system.

6 6 Fiberspar Line Pipe High Pressure Product Data XT Series Series psi (2,9 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS (XT) , , (C) FS LPS (XT) , , (C) FS LPS 6 ½ 500 (XT) , , (C) Series psi (4,5 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS (XT) 2.82 (72) 3.37 (86) (1,4) 1.35 (2,01) 84 (213) 3474 (1576) 6000 (B) (1829) 3 FS LPS (XT) 3.75 (95) 4.41 (112) (1,8) 2.16 (3,21) 110 (279) 5702 (2586) 4500 (C) ( FS LPS (XT) 4.52 (115) 5.31 (135) (2,2) 3.13 (4,66) 133 (338) 8671 (3933) 2250 (C) (686) 3 FS LPS (XT) 5.00 (127) 5.83 (148) (2,3) 3.63 (5,40) 146 (371) 9947 (4512) 1800 (C) (549) 3 FS LPS 6 ½ 750 (XT) 5.60 (142) 6.51 (165) (2,6) 4.48 (6,67) 163 (414) (5633) 600 (C) (183) 3 s per s per Series psi (6,7 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 1,100 (XT) , , (A) FS LPS 2 ½ 1,100 (XT) , , (B) FS LPS 3 1,100 (XT) , , (B) FS LPS 3 ½ 1,100 (XT) , , (B) FS LPS 4 1,100 (XT) , , (C) FS LPS 5 1,100 (XT) , , (C) FS LPS 6 1,100 (XT) , , (C) FS LPS 6 ½ 1,100 (XT) , , (C) s per Series psi (9,1 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 1,500 (XT) , , (A) FS LPS 2 ½ 1,500 (XT) , , (B) FS LPS 3 1,500 (XT) , , (B) FS LPS 3 ½ 1,500 (XT) , , (B) FS LPS 4 1,500 (XT) , , (C) FS LPS 5 1,500 (XT) , , (C) FS LPS 6 1,500 (XT) , , (C) FS LPS 6 ½ 1,500 (XT) , , (C) s per

7 Fiberspar Line Pipe High Pressure Product Data 7 XT Series Continued Series psi (13,8 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 2,250 (XT) , , (A) FS LPS 2 ½ 2,250 (XT) , , (B) FS LPS 3 2,250 (XT) , , (A) FS LPS 3 ½ 2,250 (XT) , , (C) FS LPS 4 2,250 (XT) , , (C) FS LPS 5 2,250 (XT) , , (C) s per Series psi (16,7 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 2,750 (XT) , , (A) FS LPS 2 ½ 2,750 (XT) , , (A) FS LPS 3 2,750 (XT) , , (B) FS LPS 3 ½ 2,750 (XT) , , (C) FS LPS 4 2,750 (XT) , , (C) s per Series psi (21,4 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 3,500 (XT) , , (A) FS LPS 2 ½ 3,500 (XT) , , (A) FS LPS 3 3,500 (XT) , , (B) s per (1) Maximum Pressure Rating is for non-cyclic, water service. API 15S pressure ratings for hydrocarbon and gas service can be calculated by applying an additional safety factor of 0.8 for hydrocarbon and 0.67 for gas. If customers elects to use other safety factors, consult NOV Fiber Glass Systems. For other applications, consult NOV Fiber Glass Systems engineering. E = High - density polyethylene (HDPE) rated from -29 F to 140 F ( 34 C to 60 C) X = High - temperature polyethylene (HTP) rated from -29 F to 180 F ( 34 C to 82 C) XT = High - temperature polyethylene to -29 F to 203 F ( 34 C to 95 C) Size: (A) = 12 feet (B) = 14 feet (C) = 16 feet * Number of s per Truck is based on USA DOT regulations. All products are hydrotested to 1.5 times maximum recommended operating pressure. Material selection is based on the desired operating temperature and chemical compatibility of Fiberspar LinePipe constituents with fluids. Recommended field test pressure is 1.1 to 1.25 times the maximum operating pressure of the system.

8 8 Fiberspar Line Pipe High Pressure Product Data Typical Mechanical Properties Pipe Property Units 140 F 180 F 203 F C Method Long Term Hydrostatic psi 32,600 MPa 224 API 15HR 95% Lower Confidence Limit psi 21,840 MPa 150 API 15HR Circumferential Hoop Tensile Modulus psi 1,110,000 MPa 7,653 API 15HR Poisson's Ratio 0.63 API 15HR Longitudinal Axial Tensile Modulus psi 858,000 MPa 5,915 API 15HR Poisson's Ratio, V ha 0.49 API 15HR Typical Physical Properties Pipe Property Units 140 F 180 F 203 F C Method Axial Thermal Expansion in/in/ F mm/mm/ C NOV FGS Hazen Williams Coefficient 150 NOV FGS Absolute Roughness in NOV FGS Density lb/in kg/m NOV FGS Specific Gravity 1.33 NOV FGS National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes. Although every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any loss, damage or injury resulting from the use of information and data herein nor is any warranty expressed or implied. Always cross-reference the bulletin date with the most current version listed at the web site noted in this literature. Fiber Glass Systems San Pedro Avenue, Ste 200 San Antonio, Texas USA Phone: Fax: National Oilwell Varco All Rights Reserved OG6000ENG June HR-0037 / 15HR-0039 LICENSEE Q1 RATED

High Pressure Design. Design Temperature F (65.6 C)

High Pressure Design. Design Temperature F (65.6 C) STAR Super Seal - API 15HR Design (Product Data) OIL & GAS MINING Applications Production Lines or Injection Lines Oil, Gas, Saltwater Transfer Lines or Disposal Lines CO 2 and Sour Services Pipeline Rehabilitation

More information

Bondstrand 5000/5000C Product Data (Severely Corrosive Industrial Service and Oxidizing Acids)

Bondstrand 5000/5000C Product Data (Severely Corrosive Industrial Service and Oxidizing Acids) Bondstrand 5000/5000C Product Data (Severely Corrosive Industrial Service and Oxidizing Acids) Uses and Applications Acid drains Bleach processing Chemical process piping Chlorinated water Chlorine Corrosive

More information

SP Series - Fiberglass Epoxy Integral Joint Surface Pipe

SP Series - Fiberglass Epoxy Integral Joint Surface Pipe SP Series - Fiberglass Epoxy Integral Joint Surface Pipe Applications Flow Lines Injection Lines Gas Gathering & Transport Lines Recirculating Lines Solution Mining Water Processing Joining System Features

More information

HP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems)

HP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems) HP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems) CHEMICAL INDUSTRIAL Fiber Glass Systems provides a broad range

More information

Bondstrand 2425 Glassfiber Reinforced Epoxy (GRE) pipe systems for Marine and Offshore services for 25 bar pressure

Bondstrand 2425 Glassfiber Reinforced Epoxy (GRE) pipe systems for Marine and Offshore services for 25 bar pressure Bondstrand 2425 Glassfiber Reinforced Epoxy (GRE) pipe systems for Marine and Offshore services for 25 bar pressure Uses and applications Ballast water Drilling muds Saltwater/seawater Cassions Fresh water

More information

Bonstrand PSX L3, PSX L3C, PSX JF and PSX JFC Polysiloxane-phenolic Fire-resistant Fiberglass Pipe and Fittings

Bonstrand PSX L3, PSX L3C, PSX JF and PSX JFC Polysiloxane-phenolic Fire-resistant Fiberglass Pipe and Fittings Bonstrand PSX L3, PSX L3C, PSX JF and PSX JFC Polysiloxane-phenolic Fire-resistant Fiberglass Pipe and Fittings For offshore platforms, marine and onshore service Description Bondstrand PSX JF and PSX

More information

Series 3400 Fiberglass Epoxy Pipe Systems using Key-Lock mechanical joint or Taper/Taper adhesive joint

Series 3400 Fiberglass Epoxy Pipe Systems using Key-Lock mechanical joint or Taper/Taper adhesive joint Series 3400 Fiberglass Epoxy Pipe Systems using Key-Lock mechanical joint or Taper/Taper adhesive joint Uses and applications Performance Saltwater and seawater lines Brackish water lines Fire protection

More information

Submittal Data. Fiberglass Bondstrand 3000A Pipe

Submittal Data. Fiberglass Bondstrand 3000A Pipe Submittal Data Fiberglass Bondstrand 3000A Pipe Uses and Applications Cooling water General service piping Jet fuel piping Mild chemicals Municipal waste Potable water Power plant, steel mill and industrial

More information

Red Thread IIA Primary Fittings (Product Data)

Red Thread IIA Primary Fittings (Product Data) Red Thread IIA Primary Fittings (Product Data) FUEL HANDLING 90 and 45 Elbow, Flange and Tee Pipe Size A B C D E F O X 1 X 2 in mm in mm 2 50 3 3/8 86 2 1/4 57 3/4 19 4 3/4 121 3/4 D-4 Holes 19 D-4 Holes

More information

Submittal Data. Fiberglass Bondstrand 2000 Pipe pe

Submittal Data. Fiberglass Bondstrand 2000 Pipe pe Submittal Data Fiberglass Bondstrand 2000 Pipe pe Uses and Applications Chilled Water Chilled Hot Water Domestic Hot Water Condensate (Hot Water) return General service piping Jet fuel piping Mild chemicals

More information

Bondstrand 2000M/7000M Glassfiber Reinforced Epoxy (GRE) pipe systems for marine service

Bondstrand 2000M/7000M Glassfiber Reinforced Epoxy (GRE) pipe systems for marine service Quick-Lock Taper/Taper 1-16 inch Bondstrand 2000M/7000M Glassfiber Reinforced Epoxy (GRE) pipe systems for marine service with external pressure requirements 18-40 inch Uses and applications Ballast Portable

More information

Case Histories (High Pressure Line Pipe)

Case Histories (High Pressure Line Pipe) Case Histories (High Pressure Line Pipe) High Pressure Water and CO 2 Injection Line Pipe, 1992 Dollarhide Field, West Texas 2, 2500 psi Aliphatic Amine Line Pipe, 8rd Integral Joint connection 22,000

More information

Assembly Instructions for Bondstrand Fiberglass Flanges

Assembly Instructions for Bondstrand Fiberglass Flanges Assembly Instructions for Bondstrand Fiberglass Flanges Scope These instructions present NOV Fiber Glass Systems recommendations for the proper use of Bondstrand fiberglass flanges. The mounting of flanges

More information

Series 3000A Fiberglass Pipe and Fittings

Series 3000A Fiberglass Pipe and Fittings Bondstrand Product Data FIBERGLASS-COMPOSITE PIPE GROUP Series 3000A Fiberglass Pipe and Fittings for general oilfield service Uses and applications Brine and brackish water Frac source and flowback water

More information

POLYETHYLENE High Density

POLYETHYLENE High Density POLYETHYLENE High Density PE-3408/PE-3608 ENGINEERED FOR WATER AND MINING PIPING SYSTEMS PLASTIC MANUFACTURES SINCE 1953 POLYTUBES HIGH MOLECULAR WEIGHT (HMW) High Density Polyethylene Pipe for General

More information

Bondstrand 2000M/7000M for marine 1 to 6 inch (Quick-lock joint), 8 to 40 inch (Taper/Taper joint) with external pressure requirements

Bondstrand 2000M/7000M for marine 1 to 6 inch (Quick-lock joint), 8 to 40 inch (Taper/Taper joint) with external pressure requirements Bondstrand 2000M/7000M for marine 1 to 6 inch (Quick-lock joint), 8 to 40 inch (Taper/Taper joint) with external pressure requirements Uses and applications Ballast Portable discharge line Chlorination

More information

Expanding Plug Valve

Expanding Plug Valve Expanding Plug Valve Expanding Plug Valve Our expanding plug valve is designed for applications where positive shut-off, verifiable zero-leakage and double block and bleed (DBB) capabilities are required.

More information

Conley Product Bulletin

Conley Product Bulletin EXTRA HEAVY DUTY CONLEY BASKET STRAINERS Conley Product Bulletin RUGGED TOP OF THE LINE PERFORMANCE ~ AFFORDABLE COST Conley Strainer Types Inline basket strainers in sizes from 1 ½ through 30 Inline Y-type

More information

+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics.

+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics. Factory Mutual Approved CLASS 26 HDPE Pipe & Pipe Fittings CENTRAL PLASTICS 8.499.692 Table Of Contents 18-1 Design-Flow HDPE IPS HDPE Pipe (Iron Pipe ) 4-24 18-2 PE 368 HDPE Physical Properties - FM 18-3

More information

Product data sheet. SOLUFORCE Long Length Reinforced Thermoplastic Pipe (LLRTP) SOL REPORT NR REVISION DATE

Product data sheet. SOLUFORCE Long Length Reinforced Thermoplastic Pipe (LLRTP) SOL REPORT NR REVISION DATE Product data sheet SOLUFORCE Long Length Reinforced Thermoplastic Pipe (LLRTP) REPORT NR REVISION SOL201606081 V7 DATE 01-05-2017 REPORT TITLE REPORT NR Product Data SheetProduct data sheet SOL201606081

More information

SILVER STREAK FITTINGS DIMENSIONS

SILVER STREAK FITTINGS DIMENSIONS SILVER STREK FITTINGS DIMENSIONS Silver Streak piping and fittings are designed especially for abrasive and corrosive services such as limestone and gypsum slurries, found in flue gas desulfurization (FGD)

More information

FIBER GLASS SYSTEMS UL/ULC Listed Red Thread IIA Piping

FIBER GLASS SYSTEMS UL/ULC Listed Red Thread IIA Piping ulletin No. 2101 October 1, 2007 FIER GLSS SYSTEMS UL/ULC Listed Red Thread II Piping Time-Tested Fiberglass Primary Piping and Secondary Containment Piping for Underground Fuel Installations UL/ULC Listed

More information

Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit

Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit 71 I Fuse 105 Electrofusion Processor The IntegriFuse I Fuse 105 Electrofusion Processor is the next generation

More information

Innerlynx Type UL Fire Rated 3Hour Fire Stop ADVANCE PRODUCTS & SYSTEMS, INC. ISO-9001 CERTIFIED COMPANY - FM

Innerlynx Type UL Fire Rated 3Hour Fire Stop ADVANCE PRODUCTS & SYSTEMS, INC. ISO-9001 CERTIFIED COMPANY - FM Innerlynx Type UL Fire Rated 3Hour Fire Stop ADVANCE PRODUCTS & SYSTEMS, INC. ISO-9001 CERTIFIED COMPANY - FM53705 www.apsonline.com Why choose Innerlynx? offer 21 different sizes for all pipe diameters

More information

RODEC TUBING ROTATOR SOLUTIONS

RODEC TUBING ROTATOR SOLUTIONS RODEC TUBING ROTATOR SOLUTIONS RODEC TUBING ROTATOR SOLUTIONS One Company, Unlimited Solutions Since 1841, National Oilwell Varco has been dedicated to ensuring customers receive the highest quality oilfield

More information

Increasing Tubular Life & Performance.

Increasing Tubular Life & Performance. Increasing Tubular Life & Performance www.maxtube.com Over 30 years of proven field history When corrosion starts in downhole tubing, the string soon fails. The result is downtime and increased operation

More information

UnitedPolySystems.com

UnitedPolySystems.com HIGH DENSITY POLYETHYLENE PIPE from ¾ to 16 in both IPS (iron pipe size) and DIPS (ductile iron pipe size) UnitedPolySystems.com Conduit Material Specifications Applications include: Telecom, Energy, DOT,

More information

Texin 245 Covestro PUR Thermoplastic Polyurethane Elastomer (Polyester) Action Saturday, October 22, 2016 Units English Legend (Open) General Information Product Description Texin 245 resin is an aromatic

More information

Antifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30

Antifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30 Vydyne R530H Nylon resins are general purpose polyamide, heat stabilized, hydrolysis resistant, 30% glass fiber reinforced resins. Available in natural and black. It is specifically designed to maximize

More information

PVC SCHEDULE 40 FITTINGS

PVC SCHEDULE 40 FITTINGS PVC SCHEDULE 40 FITTINGS Performance Engineered & Tested 40-2-0604 SPEARS Schedule 40 PVC fitting designs combine years of proven experience with computer generated stress analysis to yield the optimum

More information

GRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.

GRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin. GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part

More information

Ford Fabricated Steel Products

Ford Fabricated Steel Products Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas

More information

TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP

TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended

More information

TKD SERIES 3-WAY BALL VALVES - TRUE UNION

TKD SERIES 3-WAY BALL VALVES - TRUE UNION TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of

More information

ULTEM* 1010 Resin. SABIC Innovative Plastics - Polyether Imide. Actions. General Information. Product Description

ULTEM* 1010 Resin. SABIC Innovative Plastics - Polyether Imide. Actions. General Information. Product Description ULTEM* 1010 Resin SABIC Innovative Plastics - Polyether Imide Actions General Information Product Description Transparent, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.

More information

h Technical Product Data CC Pressure Pipe Systems

h Technical Product Data CC Pressure Pipe Systems h Technical Product Data CC Pressure Pipe Systems Amiblu Holding GmbH All rights reserved. Publication: 09/2018 This version replaces all previous versions. For all current data please visit our website

More information

67 Series Pressure Regulators

67 Series Pressure Regulators 67 Series Pressure Regulators Fisher Controls November 1986 Bulletin The 67 Series small-volume regulators (figure 1) are typically used to provide constantly controlled reduced pressures to pneumatic

More information

PWM APi 610 BB3 Multistage Pump

PWM APi 610 BB3 Multistage Pump PWM APi 610 BB3 Multistage Pump HyDrAUliC PerfOrMAnCe COVerAge FLOW (m 3 /h) 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain pump

More information

FloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required.

FloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required. FloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required. Features Twin plate, flat seat design for enhanced sealing.

More information

Such as scratching, scoring, excessive packing wear, stuffing box damage... Have you ever wondered if there was any way to guide a polished rod?

Such as scratching, scoring, excessive packing wear, stuffing box damage... Have you ever wondered if there was any way to guide a polished rod? Have you heard of or had problems with polished rod damage? Such as scratching, scoring, excessive packing wear, stuffing box damage... Have you ever wondered if there was any way to guide a polished rod?

More information

TECHNICAL DATA SHEET. Solmax HDPE Premium Smooth - Metric Values SPECIFICATIONS PROPERTY TEST FREQUENCY (1) UNIT. Solmax.

TECHNICAL DATA SHEET. Solmax HDPE Premium Smooth - Metric Values SPECIFICATIONS PROPERTY TEST FREQUENCY (1) UNIT. Solmax. HDPE Premium Smooth - Metric Values International Inc., 2801 Boul. Marie-Victorin, Varennes, Qc, Canada, J3X 1P7 440-3100 460-3100 480-3100 500-3100 SPECIFICATIONS Thickness (min. avg.) ASTM D-5199 Thickness

More information

PWM API 610 BB3 Multistage Pump

PWM API 610 BB3 Multistage Pump PWM API 610 BB Multistage Pump PWM API 610 BB MULTISTAGE PUMP HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage FLOW (m /h) Visit our web site at www.pumpworks610.com and specify flow and performance

More information

TKD SERIES 3-WAY BALL VALVES - TRUE UNION

TKD SERIES 3-WAY BALL VALVES - TRUE UNION TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of

More information

HDPE HIGH DENSITY POLYETHYLENE PRODUCTS

HDPE HIGH DENSITY POLYETHYLENE PRODUCTS HDPE HIGH DENSITY POLYETHYLENE PRODUCTS The Standard of Excellence in the Industry CPS-IPS PECST-SL PECR1 PECR2 PECS- PECS-22 PECSC-1 PECSC-2 CERTIFIED TO NSF/ANSI 1 13 BADGER STREET YORKVILLE, ILLINOIS

More information

9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves

9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft

More information

KTM V-PORT CONTROL BALL VALVE FULL BORE AND REDUCED BORE

KTM V-PORT CONTROL BALL VALVE FULL BORE AND REDUCED BORE A rugged, long-life V-port control ball valve with excellent flow characteristics for various fluids including slurries and fibers FEATURES GENERAL APPLICATION Steam, liquids, gas or critical services

More information

YELLOWSTRIPE 8300 BIMODAL HDPE PIPE DATA SHEET

YELLOWSTRIPE 8300 BIMODAL HDPE PIPE DATA SHEET PerformancePipe.com YELLOWSTRIPE 8300 BIMODAL HDPE PIPE DATA SHEET Yellowstripe 8300 Pipe meets or exceeds: ASTM D2513 CAN/CSA-B137.4 UPC ASTM D3350, cell classification PE445574C and PE445576C PPI TR-4

More information

A New High Temperature Pressure Rated HDPE Pipe Resin Expands the Capability of Polyethylene Pipe

A New High Temperature Pressure Rated HDPE Pipe Resin Expands the Capability of Polyethylene Pipe A New High Temperature Pressure Rated HDPE Pipe Resin Expands the Capability of Polyethylene Pipe Dane Chang, PhD The Dow Chemical Company Freeport, Texas USA Carl Baker, PE The Dow Chemical Company Freeport,

More information

NUT, BOLT, GASKET KITS*

NUT, BOLT, GASKET KITS* PIPING PRODUCTS FLANGE BOLT ACCESSORIES NUT, BOLT, GASKET S* Non-Asbestos Gaskets Material: ASTM F Line Call Out: F70A9BE22KM Color: Green Thickness: / Min. / Max. Temperature: - F / 00 F Max. Operating

More information

PWM. API 610 BB3 Multistage Pump

PWM. API 610 BB3 Multistage Pump PWM API 610 BB3 Multistage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain pump

More information

JIS G (SGP)

JIS G (SGP) JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3

More information

MATERIAL DATA SHEET* ALPANA d.o.o.

MATERIAL DATA SHEET* ALPANA d.o.o. MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...

More information

Advantages of Grooved Fittings

Advantages of Grooved Fittings Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows

More information

Conley Product Bulletin

Conley Product Bulletin EXTRA HEAVY DUTY CONLEY VALVES Conley Product Bulletin RUGGED TOP OF THE LINE PERFORMANCE ~ AFFORDABLE COST Conley Valve Types Weir style diaphragm valves in sizes from 1 ½ through 6 Swing check valve

More information

Micro Motion Model D and DL Coriolis Flow and Density Meters

Micro Motion Model D and DL Coriolis Flow and Density Meters Product Data Sheet PS-00388, Rev. F April 2013 Micro Motion Model D and DL Coriolis Flow and Density Meters Micro Motion Model D and DL sensors provide flow and density measurement for liquids, gases,

More information

The Number One Choice of Line Stopping Contractors

The Number One Choice of Line Stopping Contractors JCM 0 Line Stop Fittings Take a Look!!! JCM 0 FAMILY OF LINE STOP FITTINGS HAS EPANDED New Plug Option - New Numbering System Whatever your application needs, JCM has it! JCM Industries offers the largest

More information

Existing Underwater Pipelines with Leaks are Expensive to replace or Repair! Insertion of Thermoflex Tubing is:!

Existing Underwater Pipelines with Leaks are Expensive to replace or Repair! Insertion of Thermoflex Tubing is:! Thermoflex Tubing! Reinforced Thermoplastic Gathering, Disposal and Injection Lines!! Offshore Rehabilitation of Existing Steel Pipelines! December 9, 2009!!! Background! Existing Underwater Pipelines

More information

ISO 9001 : Dual Plate Wafer Check Valves. API 594 Design API 598 Tested. Maximizing the Flow

ISO 9001 : Dual Plate Wafer Check Valves. API 594 Design API 598 Tested. Maximizing the Flow ISO 9001 : 2008 Dual Plate Wafer Check Valves API 594 Design API 598 Tested Maximizing the Flow Meets API/ANSI/ASME Specifications Quick Delivery Dual Plate Wafer Check Valves The Industry Standard Dual

More information

Comparison Between PE 4710 (PE 4710 PLUS) and PE 100 (PE 100+, PE 100 RC)

Comparison Between PE 4710 (PE 4710 PLUS) and PE 100 (PE 100+, PE 100 RC) Comparison Between PE 4710 (PE 4710 PLUS) and PE 100 (PE 100+, PE 100 RC) Author: Dr. Gene Palermo, President, Palermo Plastics Pipe Consulting, www.plasticspipe.com Abstract The scope of this paper is

More information

Oilfield Service and Distribution Products

Oilfield Service and Distribution Products Oilfield Hammer Unions Hammer Seal Swivel Joints Industrial Unions Non-Freeze Tank Valves Seal-O-Grip Oilfield Service and Distribution Products Issue Date 10/01/2009 www.kempervalve.com Sales: 800-231-2724

More information

DRISCOPIPE 8100 HDPE PIPE and FITTINGS DATA SHEET

DRISCOPIPE 8100 HDPE PIPE and FITTINGS DATA SHEET PerfmancePipe.com DRISCOPIPE 8100 HDPE PIPE and FITTINGS DATA SHEET Driscopipe 8100 Pipe and Fittings meet exceed: Driscopipe 8100 Pipe and Fittings f: ASTM D2513, D2683, D3261 ASTM D3350, cell classification

More information

Liquid Turbine Flowmeters

Liquid Turbine Flowmeters NuFlo Liquid Turbine Flowmeters Accurate Flow Measurement NuFlo developed its first flowmeter for oilfield applications in 1957. The meter incorporated a tungsten-carbide shaft and bearing to withstand

More information

Tri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port. McCANNA/MARPAC Valves RO400-R4

Tri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port. McCANNA/MARPAC Valves RO400-R4 RO400-R4 AN ISO 9001 REGISTERED COMPANY Tri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port MARPAC by McCANNA Tri-Pac E325/E525 Ball Valves DESIGN FEATURES

More information

h Technical Product Data FW Pressure Pipe Systems

h Technical Product Data FW Pressure Pipe Systems h Technical Product Data FW Pressure Pipe Systems E Engineering GmbH All rights reserved. Publication: 10/2012 All rights reserved. No part of this document may be reproduced or utilized in any form or

More information

iglidur J The Fast and Slow Motion Specialist

iglidur J The Fast and Slow Motion Specialist iglidur The Fast and Slow Motion Specialist Used in long-life applications, also with soft shafts. The iglidur plain bearings are designed for the lowest coefficients of friction while running dry and

More information

PRODUCT DATA SHEET SP-1386

PRODUCT DATA SHEET SP-1386 DESCRIPTION: ADVANTAGES: SP-1386 is a hybrid two-component elastomeric polyurethane coating designed for long-term corrosion protection of steel and concrete substrates. SP-1386 is available in Spray Grade

More information

Surface Protective Systems

Surface Protective Systems Surface Protective Systems Technical information Oxydur VEL-U Laminate system for concrete and steel substrates Base Vinyl ester resin Material Group Membranes Tank- / vessel linings - laminates Description

More information

Liquid Turbine Flowmeters

Liquid Turbine Flowmeters NUFLO Liquid Turbine Flowmeters Accurate Flow Measurement In 1957, this flowmeter was developed with a tungsten-carbide shaft and bearing to withstand the rugged conditions of the oil field. Over the years,

More information

Baumann Corrosion Resistant Control Valve

Baumann Corrosion Resistant Control Valve Product Bulletin D103337X012 Baumann 26000 Corrosion Resistant Control Valve The Baumann 26000 (figures 1 and 2) is a unique corrosion resistant control valve featuring a flangeless wafer valve body and

More information

Delivering unsurpassed quality, design and value.

Delivering unsurpassed quality, design and value. Delivering unsurpassed quality, design and value. Exergy has been a leading global supplier of heat transfer solutions for over twenty-five years. We utilize state-of-the-art design and manufacturing techniques

More information

Low friction, low wear: The Fast and Slow Motion Specialist iglidur J

Low friction, low wear: The Fast and Slow Motion Specialist iglidur J Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening

More information

Section N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products

Section N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section N 09/2017 Web Revision 10/23/2017 Ford Fabricated Steel Products Contents Page Product Numbering System... 3 Information...............................................................

More information

OrificeMaster Specifications

OrificeMaster Specifications Issue/Rev. 0.2 (10/06) Single Chamber Orifice Fittings OrificeMaster Specifications Bulletin SSOR005 FMC Technologies Measurement Solutions Orifice- Master Single Chamber Orifice Fitting is manufactured

More information

Fisher TBX Steam Conditioning Valve

Fisher TBX Steam Conditioning Valve TBX Valve Product Bulletin Fisher TBX Steam Conditioning Valve The Fisher TBX Steam Conditioning Valve is designed to handle the most severe applications in today's cycling power plants as well as provide

More information

Fisher 8580 Rotary Valve

Fisher 8580 Rotary Valve 8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic

More information

Side Entering Agitators. Reliable Performance. and Dependability

Side Entering Agitators. Reliable Performance. and Dependability Side Entering Agitators Reliable Performance and Dependability The Proof is in the Performance Innovative Solutions to Satisfy Your Needs Chemineer has the capabilities, knowledge and experience to effectively

More information

Low wear on all shafts: The Marathon Runner iglidur W300

Low wear on all shafts: The Marathon Runner iglidur W300 iglidur Low wear on all shafts: The Marathon Runner iglidur Over 400 sizes available from stock For especially long service life Low coefficient of friction Extremely high wear resistance Also suitable

More information

DuPont Vespel CR-6100 APPLICATION AND INSTALLATION GUIDE FOR CENTRIFUGAL PUMP STATIONARY WEAR PARTS

DuPont Vespel CR-6100 APPLICATION AND INSTALLATION GUIDE FOR CENTRIFUGAL PUMP STATIONARY WEAR PARTS DuPont Vespel CR-6100 APPLICATION AND INSTALLATION GUIDE FOR CENTRIFUGAL PUMP STATIONARY WEAR PARTS Fluid processing industries have embraced the use of composite materials in pumps to reduce vibration,

More information

Fisher Control-Disk Rotary Valve

Fisher Control-Disk Rotary Valve Product Bulletin Fisher Control-Disk Rotary Valve The Fisher Control-Disk rotary valve offers excellent throttling performance. An equal percentage flow characteristic provides an improved throttling range

More information

Fisher 8580 Rotary Valve

Fisher 8580 Rotary Valve 8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic

More information

innerduct Innerduct INNERDUCT tidbit

innerduct Innerduct INNERDUCT tidbit innerduct Innerduct Innerduct is manufactured from High Density Polyethylene in accordance with the specifications of ASTM F-2160 and/or NEMA TC 7. Other dimensional requirements may be acceptable upon

More information

DuPont Vespel Pump Reliability Technology. Vespel CR-6100 USAGE GUIDELINES

DuPont Vespel Pump Reliability Technology. Vespel CR-6100 USAGE GUIDELINES DuPont Vespel Pump Reliability Technology Vespel CR-6100 USAGE GUIDELINES Purpose This document is intended to provide a standard method for the appropriate design, installation and application of Vespel

More information

DESIGN AND ANALYSIS OF PUSH ROD ROCKER ARM SUSPENSION USING MONO SPRING

DESIGN AND ANALYSIS OF PUSH ROD ROCKER ARM SUSPENSION USING MONO SPRING Volume 114 No. 9 2017, 465-475 ISSN: 1311-8080 (printed version); ISSN: 1314-3395 (on-line version) url: http://www.ijpam.eu ijpam.eu DESIGN AND ANALYSIS OF PUSH ROD ROCKER ARM SUSPENSION USING MONO SPRING

More information

THE LEADING FORCE behind liquids TM since Rotary Positive Displacement Pumps

THE LEADING FORCE behind liquids TM since Rotary Positive Displacement Pumps THE LEADING FORCE behind liquids TM since 1857 Rotary Positive Displacement Pumps External Gear 3600 Series General purpose pumps for transferring, mixing, blending and recirculating. Efficiently handles

More information

Type 8560 Eccentric Disk Butterfly Control Valve

Type 8560 Eccentric Disk Butterfly Control Valve Product Bulletin 8560 Valve Type 8560 Eccentric Disk Butterfly Control Valve The Type 8560 high-performance valve (figures 1 and 2) features a stainless steel disk with a soft or stainless steel seal ring.

More information

LVS SUP-R-SEAL MODEL ES GATE VALVES

LVS SUP-R-SEAL MODEL ES GATE VALVES LVS SUP-R-SEAL MODEL ES GATE VALVES LOUISIANA VALVE SOURCE INC. LOUISIANA VALVE SOURCE INC. PROUDLY MADE AND ASSEMBLED IN USA May 2012 Page 1 www.lavalve.com ENGINEERING BULLETIN 2014 Table of Contents:

More information

HDPE piping systems offer many benefits when compared to most other materials; which typically include the following:

HDPE piping systems offer many benefits when compared to most other materials; which typically include the following: Rare Plastics manufacture and distribute HPE pipe & fittings from our factory in Meyerton, Gauteng. Pipes are manufactured to SANS ISO 4427 standards and sizes range from 110 to 1000. The PE100 raw material

More information

Fisher A31A Cryogenic High Performance Butterfly Valve

Fisher A31A Cryogenic High Performance Butterfly Valve A31A Cryogenic Valve Product Bulletin Fisher A31A Cryogenic High Performance Butterfly Valve The Fisher A31A Cryogenic High Performance Butterfly Valve (HPBV) is designed for extreme temperature cryogenic

More information

VERLON No Swell Wear Rings

VERLON No Swell Wear Rings VERLON No Swell Wear Rings Ultra precision +.001 tolerance on cross section NO SWELL - Lowest friction Strength to 40,000 PSI Large range of widths, cross sections and diameters - metric too Features &

More information

CARBONE LORRAINE CHEMICAL EQUIPMENT DIVISION PTFE Bellows & Compensators ARMYLOR

CARBONE LORRAINE CHEMICAL EQUIPMENT DIVISION PTFE Bellows & Compensators ARMYLOR CARBONE LORRAINE CHEMICAL EQUIPMENT DIVISION PTFE Bellows & Compensators ARMYLOR Contents 3 Carbone Lorraine 4 Range of Bellows & Compensators 5 References 6 7 Technical specifications 8 Bellow flanges

More information

Fisher 9500 Butterfly Control Valve

Fisher 9500 Butterfly Control Valve 9500 Product Bulletin Fisher 9500 Butterfly Control The Fisher 9500 butterfly valve is a fully lined valve for use with corrosive fluids and where tight shutoff is required. The nitrile or PTFE liner totally

More information

Fisher D4 Control Valve Assembly

Fisher D4 Control Valve Assembly Product Bulletin D103039X012 Fisher D4 Control Valve Assembly D4 Valve The Fisher D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications. This valve

More information

MODELLING AND STRUCTURAL ANALYSIS OF VEHICLE CHASSIS FRAME MADE OF POLYMERIC COMPOSITE MATERIAL

MODELLING AND STRUCTURAL ANALYSIS OF VEHICLE CHASSIS FRAME MADE OF POLYMERIC COMPOSITE MATERIAL MODELLING AND STRUCTURAL ANALYSIS OF VEHICLE CHASSIS FRAME MADE OF POLYMERIC COMPOSITE MATERIAL Shaik Neelophar Begum 1, S.P.Bhanu Murthy 2 1Department of Mechanical Engineering, VEMU Institute of Technology,

More information

flowserve.com Kämmer Multi-Z Kämmer Multi-Z Severe Service Valves

flowserve.com Kämmer Multi-Z Kämmer Multi-Z Severe Service Valves flowserve.com Severe Service Valves 1 Introduction Solids and cavitation completely under control Users from the power generation, petrochemical and industrial chemicals industries are frequently confronted

More information

Liquid Turbine Flowmeters

Liquid Turbine Flowmeters MEASUREMENT SYSTEMS NUFLO Liquid Turbine Flowmeters Accurate Flow Measurement NuFlo developed its first flowmeter for oilfield applications in 1957. The meter incorporated a tungsten-carbide shaft and

More information

3 TM Cold Applied Barrier Boot System

3 TM Cold Applied Barrier Boot System M Technical Information : Barrier Boot TM Cold Applied Barrier Boot System For rated voltages 6.5/11(12) kv and 8.7/15(17.5) kv 92-EE 717-1 Product Description The Cold Applied Barrier Boot System consist

More information

Worcester Controls Directional Ball Valves

Worcester Controls Directional Ball Valves Worcester Controls Directional Ball Valves Series D44/D4, Series D51, Series 18/19 Experience In Motion Page 2 Series D44/D4, ½ " 2" Bottom Entry Page 6 Series D51, 2" 8" Bottom Entry Page 9 Series 18/19,

More information

Fisher Z500 Severe Service Ball Valves

Fisher Z500 Severe Service Ball Valves Z500 Ball Valves D099X0 Product Bulletin 5.:Z500 April 06 Fisher Z500 Severe Service Ball Valves This bulletin covers Fisher NPS / 6 Z500 Severe Service Ball Valves. The Z500 severe service ball valve

More information

ARMYLOR PTFE BELLOWS & COMPENSATORS

ARMYLOR PTFE BELLOWS & COMPENSATORS ARMYLOR PTFE BELLOWS & COMPENSATORS CONTENT MERSEN ANTICORROSION EQUIPMENT p.2 RANGE OF BELLOWS & COMPENSATORS p.3 REFERENCES p.4 TECHNICAL SPECIFICATIONS p.5-6 BELLOW FLANGES p.7 COMPENSATOR FLANGES p.8

More information

Fisher Multi-Port Flow Selector Valve

Fisher Multi-Port Flow Selector Valve Multi-Port Flow Selector Valve D104330012 Product Bulletin Fisher Multi-Port Flow Selector Valve The Fisher Multi-Port Flow Selector Valve connects up to eight input lines, allowing for the diversion and

More information