Prices subject to change without notice. - International product pricing will vary. ASA-LIT 11/01
|
|
- Maryann Hodges
- 5 years ago
- Views:
Transcription
1 NEW PRODUCTS Larger Radius Elbow Weld ittings Nor-Cal offers 45 and 90 Radius Elbows in sizes up to ten inches OD. Radius elbows offer the highest conductance geometry in a tube bend. These elbows are also listed in their appropriate catalog as weld fittings or with C or ISO flanges. Conical Reducer Nipples These reducers provide a compact means of reducing to a smaller flange and tube size in a short distance with minimal loss in conductance. They are also listed in the appropriate catalog as weld fittings or with C and ISO flanges. Conical dapter Nipples The same fittings used as a reducer can be ordered as a standard product to adapt an S flange to a C, ISO or NW flange with minimal loss in conductance. These adapters are also available with other flange combinations in their appropriate catalog. Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
2 S LNGE SYSTEM Rotatable S lange Non-rotatable S lange with O-ring groove Insert O-ring Receiver General Information Nor-Cal s S flanges are manufactured from specially treated 304 stainless steel. These flanges mate with standard 50 lb. S flanges or 50 NSI flanges. They are available from stock for standard tube sizes from two to inches. Larger sizes are available upon request. Nuts and bolts are used to apply pressure between the mating flanges and a seal is effected when a Viton- O-ring is compressed. S flanges can be baked to 04 C and have a vacuum range of up to 0-8 Torr. esides being sold separately, they are available as standards on nipples, adapters, tees, crosses, traps, elbows and valves. Rotatable lange Option Only Nor-Cal offers S flanges in rotatable as well as non-rotatable versions. When components of several systems are used interchangeably, use of rotatable flanges is recommended. ssembly is facilitated by rotation of mating flanges, to align bolt holes. Non-rotatable S flanges, unlike rotatable, contain both sealing surface and bolt holes in one unit rather than two. This makes the non-rotatable flange less expensive, and therefore the preferred choice when mating component orientation is not a concern. ll fittings are priced with non-rotatable flanges. or fittings with rotatable flanges, add the difference between a non-rotatable and rotatable flange of the desired size. Multiply by the number of rotatable flanges required. e sure to specify the flange numbers which are rotatable. O-Ring Groove Option One of each pair of mating S flanges requires an O-ring groove. When ordering flanges with grooves indicate this by adding -G to the flange model number. n example would be a rotatable S- flange bored out for six inch OD tubing with a groove. The model number would be S--600R-G. The same rule applies when ordering a fitting or adapter flange with only one S flange. n example would be adapter flange model number S Z-G. When a fitting has more than one S flange, such as a four-way cross, indicate which flanges are desired with grooves by using the flange numbers on the drawing. If, for example, you desired a cross with S-9 flanges and a six inch tube OD with grooved flanges on the left and bottom ports, the model number would be 4C-S G-G3. dd the appropriate amount for each O-ring groove to the price of the fitting. Some rotatable flange sizes are not available with O-ring grooves. Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
3 S LNGES S Non-Rotatable langes Refer to drawings on facing page for dimensional references. Part olt Holes dd for Each Type Description Number C D E No. Size Price O-Ring Groove S-5 Non-rotatable S-5-000N lank (.5 NSI) S-5-00N S-5-50N S-6 Non-rotatable S-6-000N lank (.0 NSI) S-6-300N S-6-350N S-7.5 Non-rotatable S N lank (3.0 NSI) S N S-9 Non-rotatable S-9-000N lank (4.0 NSI) S-9-400N S-9-600N S- Non-rotatable S--000N lank (6.0 NSI) S--600N S--800N S-3.5 Non-rotatable S N lank (8.0 NSI) S N S N S-6 Non-rotatable S-6-000N lank (0.0 NSI) S-6-000N S-6-00N dd suffix -G to model number if O-ring groove is required. Non-rotatable lank Non-rotatable lank with O-ring Groove Non-rotatable ored Non-rotatable ored with O-ring Groove E D C E D C Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
4 S LNGES & HRDWRE S Rotatable langes Refer to drawings on facing page for dimensional references. Part olt Holes dd for Each Type Description Number C D E No. Size Price O-Ring Groove S-5 Rotatable S-5-000R lank (.5 NSI) S-5-00R S-5-50R S-6 Rotatable S-6-000R lank (.0 NSI) S-6-300R S-6-350R S-7.5 Rotatable S R lank (3.0 NSI) S R S-9 Rotatable S-9-000R lank (4.0 NSI) S-9-400R S-9-600R S- Rotatable S--000R lank (6.0 NSI) S--600R S--800R S-3.5 Rotatable S R lank (8.0 NSI) S R S R S-6 Rotatable S-6-000R lank S-6-000R S-6-00R dd suffix -G to model number if O-ring groove is required. Rotatable lank Rotatable ored E D C Rotatable lank with O-ring Groove Rotatable ored with O-ring Groove E D C Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
5 S LNGE HRDWRE S lange Hardware Model Size Number Quantity Description Price S each Stainless steel bolts ( 9 6- x.5) nuts and washers -3 each Viton O-ring S each Stainless steel bolts ( 5 8- x.5) nuts and washers -38 each Viton O-ring S each Stainless steel bolts ( 5 8- x.5) nuts and washers -43 each Viton O-ring S each Stainless steel bolts ( 5 8- x.5) nuts and washers -59 each Viton O-ring S- - 8 each Stainless steel bolts ( x.5) nuts and washers -66 each Viton O-ring S each Stainless steel bolts ( x.5) nuts and washers -74 each Viton O-ring S-6-6 each Stainless steel bolts ( x.5) nuts and washers -78 each Viton O-ring S lange Hardware for Gate Valves Model Size Number Quantity Description Price S-6-6GV 4 each Stainless steel bolts ( x.0) and reducer bushings ( 3 8 x 3 4) -38 each Viton O-ring S GV 4 each Stainless steel bolts ( x.0) and reducer bushings ( 3 8 x 3 4) -43 each Viton O-ring S-9-9GV 8 each Stainless steel bolts ( x.0) and reducer bushings ( 3 8 x 3 4) -59 each Viton O-ring S- -GV 8 each Stainless steel bolts ( x.0) -66 each Viton O-ring S-6-6GV each Stainless steel bolts ( x.0) -78 each Viton- O-ring Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
6 S ITTINGS S ittings Nor-Cal manufactures a complete line of flanged vacuum component fittings. The tube portions are fabricated from 304 stainless steel. On request, 36 stainless steel can be supplied. Nor-Cal makes its own elbows, and all tees and crosses are made with the pulledport technique. This allows smooth, crevice-free butt welds to provide the maximum in cleanliness for UHV applications. ake-out range is up to 00 C. Nor-Cal fittings are also available with C (Conflat style), NW (ISO-K compatible) and ISO flanges. S Half Nipples Number OD OD Price O-Ring Groove N-S N-S N-S-5-50V N-S N-S N-S V N-S N-S-9-400V N-S N-S-9-600V N-S N-S--600V N-S N-S N-S N-S N-S Note: dd suffix -G to model number if O-ring groove is required. S ull Nipples Number OD OD Price O-Ring Groove N-S-5-00N N-S-5-50N N-S-5-50NV N-S-6-300N N-S N N-S NV N-S-9-400N N-S-9-400NV N-S-9-600N N-S-9-600NV N-S--600N N-S--600NV N-S--800N N-S N N-S N N-S-6-000N N-S-6-00N Note: dd suffix -G if O-ring groove is required and designate flange location by appropriate flange number; -G, -G. Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
7 S ITTINGS S Reducer Nipples Model lange lange Tube Number OD Price NR-S-9-5-N S-9 S-5.00 NR-S-9-6-N S-9 S NR-S N S-9 S NR-S--5-N S- S-5.00 NR-S--6-N S- S NR-S--7.5-N S- S NR-S--9-N S- S NR-S N S-3.5 S-5.00 NR-S N S-3.5 S NR-S N S-3.5 S NR-S N S-3.5 S NR-S-3.5--N S-3.5 S NR-S-6-5-N S-6 S-5.00 NR-S-6-6-N S-6 S NR-S N S-6 S NR-S-6-9-N S-6 S NR-S-6--N S-6 S NR-S N S-6 S Note: dd suffix -G if O-ring groove is required and designate flange location by appropriate flange number -G, -G. See S flange table for O-ring groove prices. S Conical Reducer Nipples 4.5 Model lange lange Number Size Tube OD Size Tube OD Price NRC-S-6-5-N S S-5.00 NRC-S N S S-5.00 NRC-S N S S Note: dd suffix -G to model number if O-ring is required on one flange. If groove is required on both flanges, designate by adding -G, -G. See S flange table for O-ring groove prices. S 45 Radius Elbows with Tangents Number OD OD Price O-Ring Groove KL-S-5-N KL-S-6-N KL-S-7.5-N KL-S-9-N Note: dd suffix -G to model number if O-ring is required on one flange. If groove is required on both flanges, designate by adding -G, -G. Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
8 S ITTINGS S 90º Mitered Elbows Number OD OD Price O-Ring Groove E-S-5-00NM E-S-5-50NM E-S-5-50NMV E-S NMV E-S-9-400NMV E-S-9-600NM E-S-9-600NMV E-S--600NMV E-S--800NM E-S NM E-S NM E-S-6-000NM Note: dd suffix -G to model number if O-ring groove is required on one flange. If groove is required on both flanges, designate by adding suffix -G, -G. R S 90º Radius Elbows Number OD OD R Price O-Ring Groove E-S-5-N E-S-6-N E-S-9-N E-S--N E-S-3.5-N E-S-6-N Note: dd suffix -G to model number if O-ring is required on one flange. If groove is required on both flanges, designate by adding -G,-G. Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
9 S ITTINGS S Tees Number OD OD Price O-Ring Groove 3T-S-5-00N T-S-5-50N T-S-5-50NV T-S NV T-S-9-400NV T-S-9-600N T-S-9-600NV T-S--600NV T-S--800N T-S N T-S N T-S-6-000N Note: dd suffix -G to model number if O-ring groove is required and designate flange location by appropriate flange number. Example: -G, -G and/or -G3. S 4-Way Crosses Number OD OD Price O-Ring Groove 4C-S-5-00N C-S-5-50N C-S-5-50NV C-S NV C-S-9-400NV C-S-9-600N C-S-9-600NV C-S--600NV C-S--800N C-S N C-S N C-S-6-000N Note: dd suffix -G to model number if O-ring groove is required and designate flange location by appropriate flange number. Example: -G, -G, -G3 and/or -G4. Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
10 S ITTINGS S 5-Way Crosses 4 Number OD OD Price O-Ring Groove 3 5 5C-S-5-00N C-S-5-50N C-S-5-50NV C-S NV C-S-9-400NV C-S-9-600N C-S-9-600NV C-S--600NV C-S--800N C-S N C-S N C-S-6-000N Note: dd suffix -G to model number if O-ring groove is required. Designate flange location by appropriate flange number. Example: -G, -G, -G3, -G4 and/or -G5. S 6-Way Crosses 6th Leg Opposite Number OD OD Price O-Ring Groove 6C-S-5-00N C-S-5-50N C-S-5-50NV C-S NV C-S-9-400NV C-S-9-600N C-S-9-600NV C-S--600NV C-S--800N C-S N C-S N C-S-6-000N Note: dd suffix -G to model number if O-ring groove is required. Designate flange location by appropriate flange number. Example: -G, -G, -G3, -G4, -G5 and/or -G6. S lex Couplings Model lange ellows ree Compressed dd for Each Number OD ID Length Length Price O-Ring Groove ree Length C-S-5-00N C-S-5-50N C-S-6-300N C-S N C-S-9-400N C-S-9-600N C-S--600N C-S--800N C-S N C-S N C-S-6-000N C-S-6-00N Note: dd suffix -G to model number if O-ring groove is required. Designate flange location by appropriate flange number. Example: -G and/or -G. Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
11 S DPTERS S to C dapter langes Model Small lange Large lange Number Detail Detail D Price S Z NT S-5-000N.6.50 S-5--00Z -000NT S-5-000N S Z NT S-5-000N S Z NT S-6-000N.6.50 S-6--00Z -000NT S-6-000N S Z NT S-6-000N S Z NT S-6-000N S Z NT S N.6.50 S Z -000NT S N S Z NT S N S Z NT S N S Z NT S N S Z NT S-9-000N.6.50 S-9--00Z -000NT S-9-000N S Z NT S-9-000N S Z NT S-9-000N S Z NT S-9-000N S Z NT S-9-000N S Z NT S-9-000N S Z NT S--000N.6.75 S---00Z -000NT S--000N S Z NT S--000N S Z NT S--000N S Z NT S--000N S Z NT S--000N S Z NT S--000N S Z NT S--000N S dapters Nor-Cal offers a full line of adapter flanges, adapter nipples and conical adapter nipples. Other flange sizes and combinations are available upon request. They are made from select grade 304 stainless steel to provide the maximum in cleanliness for UHV applications. lso see C/Wire Seal and NW/ISO catalogs for other adapter combinations. Note: dd suffix -G to model number if O-ring is required on S mating side. See S flange table for groove prices. Large lange Detail D Small lange Detail Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
12 S DPTERS S to C dapter Nipples Model lange Types Tube Number lange lange OD Price N-33-S-5.33 C S-5.75 N-33-S-6.33 C S-6.75 N--S-6. C S-6.00 N-46-S C S N-33-S C S N--S-7.5. C S N-75-S C S N-33-S-9.33 C S-9.75 N--S-9. C S-9.00 N-75-S-9.75 C S-9.50 N-338-S C S-9.00 N-450-S C S-9.50 N-46-S C S N-600-S C S N-33-S-.33 C S-.75 N--S-. C S-.00 N-75-S-.75 C S-.50 N-338-S C S-.00 N-450-S C S-.50 N-46-S- 4.6 C S N-600-S C S N-800-S C S N-33-S C S N--S-3.5. C S N-75-S C S N-338-S C S N-450-S C S N-46-S C S N-600-S C S N-800-S C S N-000-S C S N-33-S-6.33 C S-6.75 N--S-6. C S-6.00 N-75-S-6.75 C S-6.50 N-338-S C S-6.00 N-450-S C S-6.50 N-46-S C S N-600-S C S N-800-S C S N-000-S C S N-35-S C S Rotatable 5.00 Non-rotatable Note: dd suffix -G to model number if O-ring groove is required on S lange. See S flanges table for groove prices. Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
13 S DPTERS S to C Conical dapter Nipples Model lange lange Number Type Tube OD Type Tube OD Price NC--S-5. C.00 S NC-75-S-5.75 C.50 S NC-75-S-6.75 C.50 S NC-338-S C.00 S NC-338-S C.00 S NC-338-S C.00 S NC-450-S C.50 S NC-450-S C.50 S NC-450-S C.50 S NC-46-S C 3.00 S NC-46-S C 3.00 S NC-600-S C 4.00 S NC-600-S C 4.00 S Rotatable Non-rotatable Note: dd suffix -G to model number if O-ring groove is required on S flange. See S flange table for groove prices. S to NW dapter Nipples Model lange Types Tube Number lange lange OD Price N-NW-6-S-5 NW-6 S-5.75 N-NW-6-S-6 NW-6 S-6.75 N-NW-6-S-7.5 NW-6 S N-NW-6-S-9 NW-6 S-9.75 N-NW-6-S- NW-6 S-.75 N-NW-5-S-6 NW-5 S-6.00 N-NW-5-S-7.5 NW-5 S N-NW-5-S-9 NW-5 S-9.00 N-NW-5-S- NW-5 S-.00 N-NW-40-S-7.5 NW-40 S N-NW-40-S-9 NW-40 S-9.50 N-NW-40-S- NW-40 S-.50 N-NW-50-S-9 NW-50 S-9.00 N-NW-50-S- NW-50 S Note: dd suffix -G to model number if O-ring groove is required on S flange. See S flange table for groove prices. S to NW Conical dapter Nipples Model lange lange Number Type Tube OD Type Tube OD Price NC-NW-5-S-5 S-5.00 NW NC-NW-40-S-5 S-5.50 NW NC-NW-50-S-5 S-5.50 NW NC-NW-40-S-6 S NW NC-NW-50-S-6 S NW NC-NW-50-S-7.5 S NW Note: dd suffix -G to model number if O-ring goove is required on S flange. See S flange table for groove prices. Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
14 S DPTERS S to ISO dapter Nipples Model lange Types Number lange lange Tube OD Price N-ISO-63-O-S- ISO-63-O S-.50 N-ISO-80-O-S-6 ISO-80-O S N-ISO-80-O-S- ISO-80-O S N-ISO-00-O-S-7.5 ISO-00-O S N-ISO-00-O-S-9 ISO-00-O S N-ISO-00-O-S- ISO-00-O S N-ISO-60-O-S-9 ISO-60-O S N-ISO-60-O-S- ISO-60-O S N-ISO-00-O-S- ISO-00-O S N-ISO-00-O-S-3.5 ISO-00-O S Note: dd suffix -G to model number if O-ring groove is required on S lange. See S flange table for groove prices. S to ISO Conical dapter Nipples Model lange lange Number Type Tube OD Type Tube OD Price NC-ISO-63-O-S-5 ISO-63-O.50 S NC-ISO-63-O-S-6 ISO-63-O.50 S NC-ISO-63-O-S-7.5 ISO-63-O.50 S NC-ISO-80-O-S-5 ISO-80-O 3.00 S NC-ISO-80-O-S-7.5 ISO-80-O 3.00 S NC-ISO-00-O-S-5 ISO-00-O 4.00 S NC-ISO-00-O-S-6 ISO-00-O 4.00 S Note: dd suffix -G to model number if O-ring groove is required on S flange. See S flange table for groove prices. Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
15 S STINLESS STEEL LEXILE HOSE S lexible Stainless Steel Hose Nom Model dd for Each OD Number Length Description Price O-Ring Groove.5 H-50--S.0 S-5 on one port H-50--S.0 S-5 on both ports H-50-8-S 8.0 S-5 on one port H-50-8-S 8.0 S-5 on both ports H-50-4-S 4.0 S-5 on one port H-50-4-S 4.0 S-5 on both ports H S 36.0 S-5 on one port H S 36.0 S-5 on both ports 3.0 H-300--S.0 S-6 on one port H-300--S.0 S-6 on both ports H S 8.0 S-6 on one port H S 8.0 S-6 on both ports H S 4.0 S-6 on one port H S 4.0 S-6 on both ports H S 36.0 S-6 on one port H S 36.0 S-6 on both ports 4.0 H-400--S.0 S-7.5 on one port H-400--S.0 S-7.5 on both ports H S 8.0 S-7.5 on one port H S 8.0 S-7.5 on both ports H S 4.0 S-7.5 on one port H S 4.0 S-7.5 on both ports H S 36.0 S-7.5 on one port H S 36.0 S-7.5 on both ports Note: dd suffix -G if O-ring groove is required and designate flange location by appropriate flange number. Example: -G and/or -G. Length Stainless steel vacuum hose is available in.5 to 4.0 inch diameters with S flanges. Standard lengths are, 8, 4 and 36 inches with one non-rotatable or one rotatable and non-rotatable flange. e sure to specify if O-ring grooves are required. Non-standard lengths can be supplied upon request. lex hoses can be found with other flange types or with butt weld fittings in their appropriate catalog. The flexibility and reliability of these hoses, provided by 3 stainless steel, make them ideally suited for vibration isolation and roughing and alignment manifolds. Nor-Cal Products, P. O. ox 58, Yreka, C or X ncsales@n-c.com
Flanges & Fittings. 2.1 Chain Clamp Components & Hardware. 2.2 NW Flanges & Fittings ISO Flanges & Fittings. 2.4 ASA Flanges & Fittings
s & Fittings Section Two. hain lamp omponents & Hardware. NW s & Fittings.3 ISO s & Fittings.4 S s & Fittings.5 F s & Fittings.6 Wire Seal s.7 dapter Fittings.8 Flexible Hoses & ouplings.9 Weld Fittings
More informationNor-Cal Products. where technology takes shape. vacuum products catalog
Nor-al Products where technology takes shape vacuum products catalog s & Fittings Section Two.0 s & Fittings General Information 8. NW s & Fittings 9. ISO s & Fittings 9.3 S s & Fittings 38.4 F s & Fittings
More informationIntegrated Process Solutions
Integrated Process Solutions w w w. m k s i n s t. c o m Series 76 ISO-Universal fittings Sizes to 0 (2½'' to 25'') Series 76 ISO-Universal components are a vacuum flanging system for 63 mm to 1000 mm
More informationOptional Features and Accessories
Optional Features and ccessories Million Cycle Valves Vacuum Research Valves have been designed to eliminate sliding friction to extend operating life and reduce particle generation. For example, all of
More informationQBV SERIES Butterfly Valves
QV SERIES utterfly Valves KEY HIGH VUUM PROUTS, IN.'s QV Series butterfly valves are designed and manufactured to offer reliable performance, be versatile and offer an economic benefit. These valves have
More informationVacuum Components C A T A L O G
Vacuum Components C A T A L O G 1 Contents 1 Vacuum valves Angle Valves - 4 Inline Valves - 10 Butterfly & Check Valves - 14 2 s & Fittings Elastomer Seal ISO-KF - 18 Elastomer Seal ISO-LF - 34 Metal Seal
More informationIntegrated Process Solutions. Series 88. CF Component Ultra high vacuum fittings Sizes 1 1/3'' to 4 5/8''
Integrated Process Solutions w w w. m k s i n s t. c o m Series 88 CF Component Ultra high vacuum fittings Sizes '' to '' Manufactured by MKS to industry standards, Series 88 components are a full line
More informationCable & Wire Management
Type 1 Screw over... 8-14 Type 1 Quick-onnect inge over... 15-20 Type 3R nviroshield... 21-24 Type 12... 25-31 eed-through Wireway Type 12... 32-35 eed-through Wireway Type 4X... 36-39 Wiring Trough Type
More informationSECTION 3.2 INTRODUCTION ISO KF & LF FLANGES
SECTION 3.2 INTRUCTION 3.81 ISO KF & LF FLNGES FLNGES & FITTINGS ISO-KF (Klein ) and LF (Large ) flanges are part of the same family of ISO standard elastomer sealed vacuum components. LewVac ISO flanges
More information11.2 SPECIAL SERIES FLANGES 316LN STAINLESS STEEL -> Page 11.5
- HARDWARE. STANDARD FLANGES L STAINLESS STEEL -> Page. Fixed blank Flange- Fixed weld Flange- Fixed blank Flange tapped metric- Fixed weld Flange tapped metric- Rotatable blank Flange- Rotatable weld
More informationAGILENT VACUUM VALVEs
GILENT VCUUM valves 2-3 gilent Vacuum Valve Solutions 4-17 gilent High Performance Valves 18-21 Stainless Steel Tube Valves 22-23 Electromagnetic Block Valves 24 Variable Leak Valves gilent Vacuum Valve
More informationAGILENT VACUUM VALVES
GILENT VCUUM VLVES 2-3 gilent Vacuum Valve Solutions 4-23 gilent High Performance Valves 24-27 Stainless Steel Tube Valves 28-29 Electromagnetic Block Valves 30 Variable Leak Valves GILENT VCUUM VLVE SOLUTIONS
More informationCable & Wire Management
Cable & ire Management ay-in ireway Data Sheet Cable & ire Management pplication ouses runs of control and power cable Protects against circulating dust, falling dirt and dripping noncorrosive liquids
More informationFLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationCable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
More informationIsolation Valves. 3.1 General Information. 3.2 N-Series Valves. 3.3 Poppet Valves. 3.4 Ball Valves. 3.5 Genesis Valves & Fittings 1
Section Three 3 3.1 General Information 3.2 N-Series 3.3 Poppet 3.4 all 3.5 Genesis & Fittings 1 3.6 Manual utterfly 3.7 Pendulum 3.8 Linear Gate 3.9 ellowless Poppet & Leak 2 3.10 Valve Heaters 2 3.11
More informationFounded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers
More informationA&N CORPORATION High Vacuum Manufacturers Since 1965 TRI-SEAL
&N ORPORTION High Vacuum Manufacturers Since 1965 TRI-SEL T L O G VUUM TEHNOLOGY DISTRIUTION TRI-SEL FLNGE SYSTEM Page INTRODUTION...1-2 LMPS: HINGED QUIK LMP TYPE 3/4" - 2" luminum - Elastomer Seal Only...3
More informationO-Ring Face Seal Hose
Hose TRADITIONAL HIGH VIBRATION HOSE SYSTEM THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS Table of Contents Page Introduction... 1 Safety Guidelines... 2 Control
More informationMicro24 TM Hose & Tube System
Micro24 TM Hose & Tube System THE COMPACT HOSE & TUBE SYSTEM IDEAL FOR HOSING APPLICATIONS IN SMALLER AND PROGRESSIVE DIES WHERE SPACE IS LIMITED. METAL FORMING SOLUTIONS TM Micro24 System The Compact
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationUltra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More informationAluminum Valves with Flanges Electro-pneumatic, Electric Motor or Manual Actuators
Aluminum Valves with s Electro-pneumatic, Electric Motor or Manual Actuators Let us put our experience to work for you. www.vacuumresearch.com Aluminum Gate Valves with Aluminum valves with pneumatic actuators
More informationVacuum Relief Performance Curves
Vacuum Relief Valves Crispin Vacuum Relief Valves Valve Function llows air to enter system when vacuum occurs Prevents air exhaustion during pump start-up Features Cracks open to admit air at.25 PSIG differential
More informationHAMMER UNIONS AND SWIVEL JOINTS. Sara Sae
HAMMER UNIONS AND SWIVEL JOINTS Sara Sae Quality and Innovation Sara manufactures a diverse range of oilfield equipment in its manufacturing facility in India, using the latest design techniques and CNC
More informationWARNING. Before the exhaust silencer is fitted to the pump, the pump must be secured as describe in the pump manual. WARNING
5 Exhaust silencer WARNING Before the exhaust silencer is fitted to the pump, the pump must be secured as describe in the pump manual. WARNING The exhaust silencer must be removed from the pump before
More informationButtweld. Pipe Fittings NOTE: ANSI B16.9, MSS-SP-43
Buttweld Pipe Fittings NOTE: ANSI B16.9, MSS-SP-43 Buttweld fittings in duplex and other special alloys are available from stock and throughout our worldwide network of suppliers. and eccentric reducers,
More informationHolley LS Modular Mid-Rise Intake Manifold Kits and Mid-Rise Plenum Base Adapter for Custom EFI Intake Manifold Installations
Holley LS Modular Mid-Rise Intake Manifold Kits and Mid-Rise Plenum Base Adapter for Custom EFI Intake Manifold Installations Holley P/N Description 300-126 / 300-126BK LS1 Modular Mid-Rise Intake Manifold
More informationSample Transfer & Manipulation
Sample Transfer & Manipulation Section Nine.1 General Information 2.2 Sample Transfer System & Load Lock Chamber 4.3 dd--doors 5.4 Manipulators, Stages & Translators 6.5 Utility Hat & lignment Gimbals
More informationSEE VICTAULIC PUBLICATION FOR DETAILS
dapters SEE VICTULIC PULICTION 10.01 FOR DETILS Style 741 Style 741 adapter is designed for directly incorporating flanged components with NSI CL. 125 or CL. 150/PN10 and PN16 or ustralian Standard Table
More informationPlain Ended Welding Fittings BS 4825 Part 2
Plain Ended Welding Fittings BS 4825 Part 2 Alchem offer a wide range of plain ended weld fittings to suit both hygienic and pharmaceutical applications. These include bends, tees, and reducers, both concentric
More informationIsolation Valves. 3.1 General Information N-Series Valves Poppet Valves Ball Valves Genesis Valves & Fittings 20
Isolation Valves Section Three 3 3.1 General Information 2 3.2 N-Series Valves 4 3.3 Poppet Valves 6 3.4 all Valves 18 3.5 Genesis Valves & Fittings 20 3.6 Manual utterfly Valves 27 3.7 Pendulum Valves
More information4412HS Wway 4X4X12 N1 HC Lay-In. Features. Material, Color, and Finish. Dimensions and Weight. Long Description. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 ax: 936-560-4685 4412S Wway 4X4X12 N1 Lay-In ooper -Line/able Tray atalog Number Manufacturer Description Weight per unit Product ategory
More informationRecommended BFV Installation, Maintenance & Repair Procedures Ultraflo 300 & 400 Series Valves
I. Introduction Recommended BFV Installation, Maintenance & Repair Procedures Ultraflo 300 & 400 Series Valves A. Butterfly Valve Seat / Disc Function The seat in most resilient-seated butterfly valves
More informationWater Cooled Vacuum Valves, Gate and Poppet Style
Water Cooled Vacuum Valves, Gate and Poppet Style Port Sizes from 2 to 32 Inch, 63 to 800 mm ANSI, ISO, JIS, Conflat or Custom s Electric Motor or Electro-Pneumatic Actuator Available for DIV. 1, grp.
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationMedium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
More informationMechanical Insulation ZESTON PVC INSULATED FITTING COVERS AND JACKETING PRODUCT CATALOG
Mechanical Insulation ZESTON PVC INSULATED FITTING COVERS AND JACKETING PRODUCT CATALOG TABLE OF CONTENTS ZESTON 300 SERIES White Product Visual Index 4 Color Product Visual Index 6 Long and Short Radius
More informationGenesis Modular Valves
3SETION 3.5 SPEIFITIONS Port Os: 3 /4 to 2 inches. Larger sizes and metric tubing diameters available on request Mating flange s: NW -16 through 5 standard ir fittings: 5 /32 inch One-Touch Materials ody:
More informationPVC SUPERDUCT PIPE PVC SUPERDUCT FITTINGS
HRRISON MCHINE & PLSTIC CORPORTION PVC SUPERDUCT PIPE PVC SUPERDUCT FITTINGS For Harrison Fume Exhaust Systems Dimensions Catalog 1 HRRISON MCHINE & PLSTIC CORPORTION 11614 ST. RT. 88 GRRETTSVILLE, OH
More informationThermo Scientific Gilmont
Direct Reading Laboratory Flowmeters Instruments Wide selection of flow ranges measure air from 0.02 ml/min to 137 LPM or water from 0.0002 ml/min to 4.1 LPM Excellent chemical compatibility with glass
More informationSILVER STREAK FITTINGS DIMENSIONS
SILVER STREK FITTINGS DIMENSIONS Silver Streak piping and fittings are designed especially for abrasive and corrosive services such as limestone and gypsum slurries, found in flue gas desulfurization (FGD)
More informationASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
More informationSection 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.
Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...
More informationManufacturing Facilities. Sheet Metal Connectors, Inc. is proud to be a member or affiliated with the following associations;
Corporate Headquarters SHEET METL CONNECTORS, INC. 5850 MIN STREET N.E. MINNEPOLIS, MINNESOT 55432 Toll Free: 800-328-1966 Local: 763-572-0000 Fax: 763-572-1100 www.smcduct.com Manufacturing Facilities
More informationDualSeal 24 Hose System
DualSeal 24 Hose System THE PREFERRED HOSE SYSTEM IDEAL FOR CONNECTING NITROGEN GAS SPRINGS AND ENSURING A BALANCED LOAD METAL FORMING SOLUTIONS DualSeal 24 System The Preferred Hose System IDEAL FOR CONNECTING
More informationBall & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042
More informationOperator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
More informationValve Solutions Series 150/160 and V-100 Valves
w w w. m k s i n s t. c o m Valve Solutions Series 1/160 and V- Valves High vacuum bellows sealed valves Features and enefits hoice of manual, pneumatic or electropneumatic actuation ngle and Inline body
More informationSAE FLANGES V C. Specialists in VESCOR. Hydraulic Reservoirs and Accessories
SAE FLANGES V C VESCOR Specialists in Hydraulic Reservoirs and Accessories V C TABLE OF CONTENTS V C General Information / Split Flange Clamp............................page 1 Welding Information / Simplified
More informationSECTION 1 Grooved Fittings
Anvil offers two different sets of stainless steel fittings. The Gruvlok Series Fittings have full flow designs formed from type 304SS pipe. The Schedule 10 fittings are fabricated from segmentally welded
More informationPUSH PULL DEVICES. Section 03. Introduction to Push Pull Devices 044. Magnetically-coupled devices. MPPRL - Rotary and Linear Motion 046
Section PUSH PULL DEVICES Introduction to Push Pull Devices 044 Magnetically-coupled devices MPPRL - Rotary and Linear Motion 046 MPPL - Linear Guided Motion 048 MPP - Linear Unguided Motion 050 Edge-welded
More informationWelded Valve Configurations
Welded Configurations Welded valve configurations are designed to improve the process in aseptic production facilities by reducing the dead legs in accordance to cgmp. Welded valve configurations may be
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationCOOPLOK Grooved Submittal. Material Specifications
SmithCooper International (SCI) COOPLOK Submittal Directions: Enter in the project information below; then print. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:
More informationCPVC DUCT PIPE & FITTINGS
CPVC DUCT PIPE & FITTINGS For Harrison Fume Exhaust Systems HRRISON MCHINE & PLSTIC CORPORTION Dimensions Catalog 1 HRRISON MCHINE & PLSTIC CORPORTION 11614 ST. RT. 88 GRRETTSVILLE, OH Table of Contents
More informationChannel Cable Tray - Accessories & Fittings
hannel able Tray - Straight Sections E-1 -Line series able Tray Systems hannel able Tray - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding
More informationDUNIWAY VACUUM EQUIPMENT & SUPPLIES STOCKROOM CORP. CATALOG COMPLETE. Turbo Pumps. Mechanical. Ion Pumps. Pumps. Gauge Controls.
DUNIWAY STOCKROOM CORP. 015 COMPLETE CATALOG Mechanical Pumps Ion Pumps Turbo Pumps Gauge Controls Supplies Vacuum Sensors Hardware Valves Diffusion Pumps VACUUM EQUIPMENT & SUPPLIES Rev 6/30/15 WWW.DUNIWAY.COM
More informationHTD Pulley & Belt Drives
HTD Pulley & elt Drives HTD timing belts offer optimised load distribution through the rounded tooth form, guaranteeing high power transmission in low speed and high torque applications. apable of transmitting
More informationUNITED BRAND FITTINGS
UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationOPERATION MANUAL NT50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 7/11 rev. 1
OPERATION MANUAL NT50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company 7/11 rev. 1 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to 93.3 C 0 F to 200 F Buna-N -12.2
More informationDIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
More informationTHE FIBERBOND FITTINGS GUIDE
ENGINEERED COMPOSITE PIPING SYSTEMS THE FITTINGS GUIDE FIBERBOND SERIES 20C 110FW 20HV-D www.fiberbond.com www.futurepipe.com March 2010 Edition FIBERBOND Fittings Guide PIPE SERIES: The fittings contained
More informationGrinnell Grooved Fire Protection Products Grooved Fittings
Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical
More informationUNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
More informationNW Clamps, Centering Rings and Bellows
NW Clamps, Centering Rings and ellows Stainless Steel ellows 304 Stainless Steel Formed ellows Leak Rate etter Than 2 x 10-10 scc/s ISO, NSI, and JIS Flanges vailable Custom Lengths To Fit Your System
More information82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
More informationUHV gate valve Series 10
UHV gate valve Series Main applications The standard valve for UHV isolation applications in research and industry Ordering information Valve with manual actuator crank handle Ordering numbers ISO-F metric
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationModel B. Thermostatic Valves FEATURES APPLICATIONS FLOW RATES OF USGPM TAMPER-PROOF TEMPERATURE SETTINGS OF 55 F F
Model Thermostatic Valves FETURES FLOW RTES OF 68-1200 USGPM TMPER-PROOF TEMPERTURE SETTINGS OF 55 F - 240 F OMPLETELY SELF-ONTINED POSITIVE 3-WY VLVE TION VILLE IN ST IRON, DUTILE IRON, RONZE, STEEL,
More informationQuick-Fit Ducting 2018 Price Catalog
QF Quick-Fit Ductg 2018 Catalog Pricg effective February 1, 2018 Made the US DuctgSystems.com Nordfab Ductg The World s Fastest Ductg Nordfab s Quick-Fit (QF ) is The World s Fastest Ductg every aspect
More informationSMS Swedish Standard Union
SMS Swedish Standard Union Swedish standard union incorporates a round slotted nut and features a crevice free flat section seal. The union is suitable for use on permanently fitted sections of pipework
More informationQuick-Fit Ducting September 2018 Price Catalog
QF Quick-Fit Ductg September 2018 Catalog 888-372-0050 x3 Sales@IndustrialirPurification.com Made the US www.nordfab-us.com 800-532-0830 Nordfab Ductg The World s Fastest Ductg Nordfab s Quick-Fit (QF
More informationBall splines can be configured for an endless number of automated operations. Demystifying Ball Spline Specs
Ball splines can be configured for an endless number of automated operations. Demystifying Ball Spline Specs Place a recirculating-ball bushing on a shaft and what do you get? Frictionless movement of
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
More informationSection A Busway
Section 8 800 5000 usway usway atalog Numbering System Section 8 800 5000 usway usway atalog Numbering System atalog numbers are composed of two basic parts the prefix (as below), plus the suffix of each
More informationHDPE Pipe. Catalogue
HDPE Pipe Catalogue HDPE PIPE Catalogue Overview Proplastics is a leading supplier of world class plastic pipe systems for water and sewer reticulation to Southern Africa. Proplastics produces a wide range
More informationPipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.
Pipe Fittings 1 www.swagelok.com Pipe Fittings PIP 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings Contents Nipples Page 4 Crosses
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
More informationd z z Le Le Elbow d L mm equiv inch 110 Le r 1) z 5 2 5 5 8 2 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
More informationVacuum Gate Valves Product Introduction Vacuum gate valves are used primarily for the protection of high vacuum pumps but can also be used to 'valve-off' two connecting chambers. The next generation of
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationVacuum Fittings and Feedthroughs
Vacuum Fittings and Feedthroughs CONTENTS Introduction...3 Company History...3 PRODUCTS...4 QUALITY.AND.SERVICE...6 Product Listings KF.FLANGES.AND.FABRICATIONS...7 ISO.FLANGES.AND.FABRICATIONS... 25 CF.FLANGES.AND.FABRICATIONS...41
More informationAir Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
More information2 Exhaust Accessories
2 Exhaust ccessories U-olt Clamps.... 2-3 Guillotine U-olt Clamps... 2-3 Flat and U-olt Clamps.... 2-3 Round U-olt Clamps........................ 2-3 Welded Saddle U-olt Clamps... 2-3 ccuseal and Flat
More informationLong Welding Neck Flanges Catalogue
Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES
More informationPipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
More informationGateKeeper Aluminum Gate Valves
GateKeeper Aluminum Gate Valves 250 mm Air-Operated 100 mm Air-Operated 63 mm Air-Operated The GateKeeper Series Aluminum Gate Valves are economical, reliable vacuum shut-off devices designed and manufactured
More informationPlumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
More informationInstallation, Operating & Maintenance Instructions. UHV gate valve with pneumatic actuator. Series 108 DN mm (I. D. 2½ 8 )
Installation, Operating & Maintenance Instructions UHV gate valve with pneumatic actuator Series 108 DN 63 200 mm (I. D. 2½ 8 ) This manual is valid for the following product ordering numbers: 108.. -.
More informationFABRICATION COMPONENTS STAINLESS STEEL MANDREL BENDS T304 STAINLESS STEEL OVAL MANDREL BENDS T304 S.S. OVAL TO ROUND TRANSITIONS
STAINLESS STEEL MANDREL BENDS T304 STAINLESS STEEL OVAL MANDREL BENDS Nominal Size Bend Angle 13189 3 45 deg. (horizontal) 16 gauge 4 1/2 13191 3 90 deg. (horizontal) 16 gauge 4 1/2 13200 3 45 deg. (vertical)
More informationEaton. Repair Information. Model and Piston Motors Fixed Displacement, Valve Plate Design. Medium Duty Piston Pump NO.
Eaton Medium Duty Piston Pump NO. 7-141 Repair Information Model 74318 and 74348 Piston Motors Fixed Displacement, Valve Plate Design Parts Drawing 8 1 2 3 4 5 6 5 4 7 22 23 Rear or Opposite side Porting
More informationSheet Metal Connectors, Inc Main Street N.E. Minneapolis, Minnesota
Sheet Metal Connectors, Inc. 5850 Main Street N.E. Minneapolis, Minnesota 55432-5439 Sheet Metal Connectors, Inc. www.smcduct.com SPECIFICATIONS FOR SPIRAL PIPE AND FITTINGS MINNEAPOLIS, MN 5850 Main Street
More informationKB Series self averaging pitot flowmeter for gas, liquids and steam flows
process measurement solutions K Series self averaging pitot flowmeter for gas, liquids and steam flows Data sheet IP371 Advantages of the K series Description Patented square sensor design - reliable accuracy
More informationPendulum valve Series 16
Pendulum valve Series 1 Series 1.2 Main applications pplications requiring a compact design Especially suited to demanding corrosive processes Ordering information Valve with pneumatic actuator single
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationVIKING GENERAL PURPOSE PUMPS SERIES 32 AND 432
Page 310.1 FEATURES SERIES 32 and 432 3 GPM (.7 m³/hr) Size Shown. or Mechanical seal type. Valve on casing. SERIES 432 5 GPM (1 m³/hr) Mechanical seal type. Shown with valve on head. C, F & FH Sizes J
More information