FEATURES. 3 position models can be equipped with special 180 operators offering two 90 steps.
|
|
- Reynard Cross
- 5 years ago
- Views:
Transcription
1 2" 8" (DN ) OTTOM PORTED 3-WY FLNGED LL VLVES Jamesbury bottom ported 3-way ball valves provide a variety of flow paths not commonly found in other 3-way designs.the basic design is suitable for diversion applications where positive shut-off is also required. It is equipped with a ball having a right angle port which, during its two step (180 rotation), connects either end port with the bottom port of the valve, plus has an intermediate shut-off position. vailable in 2" 8" (DN ) sizes, these valves are designed for lass 150 service. It can also be ordered for 2-position operation, without stops at the intermediate position. M150F/DM150F lso available, is a special version which has a ball with two completely separate flow paths. Furnished for two position service (90 rotation), the 2TR provides either throughway flow through the endports, or diversion flow between either of the endports and the bottom port. M150F-2TR/DM150F-2TR The 3-position 3TR, permits diversion flow between the bottom port and either end port, and through way flow by rotating the ball through two 90 steps. FETURES idirectional Flow Handles flow into the end ports or into the bottom port. Effective Stem Sealing The compression of low friction PTFE box rings eliminates stem leakage and allows for easy adjustment. Economical One 3-way valve does the work of two or three conventional valves. Easy utomation 2 position models can be equipped with Jamesbury pneumatic, hydraulic or electric actuators for single source responsibility. 3 position models can be equipped with special 180 operators offering two 90 steps. M150F-3TR/DM150F-3TR 114-2EN 4/2012
2 METSO 114-2EN SPEIFITIONS Seat ratings, indicated by solid lines in the charts, are based on differential pressure with the valve ball in the fully closed position and refer to seats only. Maximum working pressures for lass 150 steel valve bodies are shown in the tables on the previous page. s are equipped with double block seats and the rating of the elastomer becomes the limiting factor insofar as temperature is concerned. Rating for standard elastomer una-n material is -40 F to +200 F (-40 to +93 ). Rating for Viton elastomer is 0 F to 300 F (-17 to +149 ). The D seat material is Filled PTFE. VLVE SET RTINGS Differential Pressure, psi " 8" (DN ) s Double lock and leed Seats Temperature, w/una N O-ring w/viton O-ring Differential Pressure, bar Temperature, F VLVE ODY RTINGS These are maximum working pressure ratings of the valve body only. Test pressures are for hydrostatic test with ball half open. Temperature arbon Steel 316 Stainless Steel F psi psi -20 to Test Pressure Temperature arbon Steel 316 Stainless Steel bar bar -29 to Test Pressure TEHNIL ULLETIN 4/12
3 114-2EN 2" 8" (DN ) OTTOM PORTED 3-WY FLNGED LL VLVES FLOW DT M150F/DM150F v M150F-2TR-3TR/ DM150F-2TR-3TR v Size Inch DN N/ v Flow of water in gpm at 1 psi pressure drop TYPIL PPLITIONS Typical pplications Gas Oil Storage Storage D Storage Process TEHNIL ULLETIN 4/12 3
4 METSO 114-2EN DIMENSIONS 2" (DN 50) M150F Flanged all Port Flange stamped (2) places 180 apart as shown Port Flange stamped (2) places 180 apart as shown L L ( ) Flow rrow H J 3 G 1,G 2 10 K 13 S E Dia. 2 6 K 5 1 Seat Profile 31 D = olt ircles L = Size of Holes M = No. of Holes P Port Flange stamped (2) places 180 apart as shown Dimensions, inches pprox. Size D E G 1 G 2 H J K L M P*** S Weight inches lbs Dimensions, mm pprox. Size D E G 1 G 2 H J K L M P*** S Weight DN kg TEHNIL ULLETIN 4/12
5 114-2EN 2" 8" (DN ) OTTOM PORTED 3-WY FLNGED LL VLVES Part No. Part Name 2" (DN 50) M150F ILLS OF MTERILS ND PRTS LIST ody Material arbon steel (22) 316 Stainless steel (36) 1 ody arbon steel STM 216 Type W 316 Stainless steel STM 351 Type F8M 2 Insert arbon steel 316 Stainless steel 3 all 316 Stainless steel 4 Stem 316 Stainless steel 5 Seat Elastomer backed filled PTFE 6 ody Seal PTFE 7 Stem Seal PTFE 8 Stem earing Filled PTFE 9 ompression Plate arbon steel Stainless steel 10 Hex Jam Nut arbon Steel 11 onnet Screw 300 Series Stainless steel 12 Indicator Stop arbon steel Stainless steel 13 Flat Head ap Screw Stainless steel 14 Retaining Ring arbon steel 15 Handle arbon steel 16 Stem Nut 300 Series Stainless steel 17 Identification Tag 300 Series Stainless steel 31 O-Ring una-n or Viton (as specified) TEHNIL ULLETIN 4/12 5
6 METSO 114-2EN DIMENSIONS 3" & 4" (DN 80 & 100) M150F 19 & /8" Sq. 12 H J G 1,G 2 D = olt ircles L = Size of Holes M = No. of Holes 3 4 E 2 P 31 Seat Profile K Dimensions, inches pprox. Size D E G 1 G 2 H J K L M P*** S Weight inches lbs Dimensions, mm pprox. Size D E G 1 G 2 H J K L M P*** S Weight DN kg TEHNIL ULLETIN 4/12
7 114-2EN 2" 8" (DN ) OTTOM PORTED 3-WY FLNGED LL VLVES 3" & 4" (DN 80 & 100) M150F ILLS OF MTERILS ND PRTS LIST Part No. Part Name ody Material arbon steel (22) 316 Stainless steel (36) 1 ody arbon steel STM 216 Type W 316 Stainless steel STM 351 Type F8M 2 Insert arbon steel STM 216 Type W 316 Stainless steel STM 351 Type F8M 3 all 316 Stainless steel 4 Stem 316 Stainless steel 5 Seat Elastomer backed filled PTFE 6 ody Seal PTFE 7 Stem Seal PTFE 8 Stem earing Filled PTFE 9 ompression Plate arbon steel Stainless steel 10 Hex Jam Nut arbon steel 11 onnet Stud 300 Series Stainless steel 12 Indicator Stop arbon steel Stainless steel 15 Handle arbon steel 16 Stop Nut 300 Series Stainless steel 17 Identification Tag 300 Series Stainless steel 18 ompression Ring 300 Series Stainless steel 19 Lockwasher 300 Series Stainless steel 22 T Handle daptor Malleable Iron 23 Set Screw 300 Series Stainless steel 24 Stem Screw arbon steel 25 Washer arbon steel 31 O-Ring una-n or Viton (as specified) 51 racket arbon steel 52 Spring Plunger arbon steel 53 Top Spacer arbon steel 54 Lower Spacer arbon steel 55 Stud Spacer arbon steel 56 Hex Head ap Screw arbon steel 300 Series Stainless steel 57 onnet Stud 300 Series Stainless steel TEHNIL ULLETIN 4/12 7
8 METSO 114-2EN DIMENSIONS 3" & 4" (DN 80 & 100) M150F-2TR Use Loctite stud lock. djust to proper ball opening and closing position before Loctite cures. 12 H J G 1,G Seat Profile 5 6 K 2 D = olt ircles L = Size of Holes M = No. of Holes P E Dimensions, inches pprox. Size D E G 1 G 2 H J K L M P*** S Weight inches lbs Dimensions, mm pprox. Size D E G 1 G 2 H J K L M P*** S Weight DN kg TEHNIL ULLETIN 4/12
9 114-2EN 2" 8" (DN ) OTTOM PORTED 3-WY FLNGED LL VLVES 3" & 4" (DN 80 & 100) M150F-2TR ILLS OF MTERILS ND PRTS LIST Part No. Part Name ody Material arbon steel (22) 316 Stainless steel (36) 1 ody arbon steel STM 216 Type W 316 Stainless steel STM 351 Type F8M 2 Insert arbon steel STM 216 Type W 316 Stainless steel STM 351 Type F8M 3 all 316 Stainless steel 4 Stem 316 Stainless steel 5 Seat Elastomer backed filled PTFE 6 ody Seal PTFE 7 Stem Seal PTFE 8 Stem earing Filled PTFE 9 ompression Plate arbon steel Stainless steel 10 Hex Jam Nut arbon steel 11 onnet Stud 300 Series Stainless steel 12 Indicator Stop arbon steel Stainless steel 14 Retaining Ring 300 Series Stainless Steel 15 Handle arbon steel 16 Stem Nut 300 Series Stainless steel 17 Identification Tag 300 Series Stainless steel 18 ompression Ring 300 Series Stainless steel 20 Spacer 300 Series Stainless steel 21 Set Screw 300 Series Stainless steel 22 T Handle daptor Malleable Iron 23 Set Screw 300 Series Stainless steel 24 Stem Screw arbon steel 25 Washer arbon steel 31 O-Ring una-n or Viton (as specified) TEHNIL ULLETIN 4/12 9
10 METSO 114-2EN DIMENSIONS 3" & 4" (DN 80 & 100) M150F-3TR 19 & /8" Sq. 12 H D = olt ircles L = Size of Holes M = No. of Holes J G 1,G P E 31 Seat Profile 5 1 K Dimensions, inches pprox. Size D E G 1 G 2 H J K L M P*** S Weight inches lbs Dimensions, mm pprox. Size D E G 1 G 2 H J K L M P*** S Weight DN kg TEHNIL ULLETIN 4/12
11 114-2EN 2" 8" (DN ) OTTOM PORTED 3-WY FLNGED LL VLVES 3" & 4" (DN 80 & 100) M150F-3TR ILLS OF MTERILS ND PRTS LIST Part No. Part Name ody Material arbon steel (22) 316 Stainless steel (36) 1 ody arbon steel STM 216 Type W 316 Stainless steel STM 351 Type F8M 2 Insert arbon steel STM 216 Type W 316 Stainless steel STM 351 Type F8M 3 all 316 Stainless steel 4 Stem 316 Stainless steel 5 Seat Elastomer backed filled PTFE 6 ody Seal PTFE 7 Stem Seal PTFE 8 Stem earing Filled PTFE 9 ompression Plate arbon steel Stainless steel 10 Hex Jam Nut arbon steel 11 onnet Stud 300 Series Stainless steel 12 Indicator Stop arbon steel Stainless steel 15 Handle arbon steel 16 Stop Nut 300 Series Stainless steel 17 Identification Tag 300 Series Stainless steel 18 ompression Ring 300 Series Stainless steel 19 Lockwasher 300 Series Stainless steel 22 T Handle daptor Malleable Iron 23 Set Screw 300 Series Stainless steel 24 Stem Screw arbon steel 25 Washer arbon steel 31 O-Ring una-n or Viton (as specified) 51 racket arbon steel 52 Spring Plunger arbon steel 53 Top Spacer arbon steel 54 Lower Spacer arbon steel 55 Stud Spacer arbon steel 56 Hex Head ap Screw arbon steel 300 Series Stainless steel 57 onnet Stud 300 Series Stainless steel TEHNIL ULLETIN 4/12 11
12 METSO 114-2EN DIMENSIONS 6" & 8" (DN 150 & 200) DM150F 12 & H J 2 G 1,G 2 E 3 5 P T T 31 Seat Profile K D = olt ircles L = Size of Holes M = No. of Holes Dimensions, inches pprox. Size D E G 1 G 2 H J K L M P*** S Weight inches lbs Dimensions, mm pprox. Size D E G 1 G 2 H J K L M P*** S Weight DN kg TEHNIL ULLETIN 4/12
13 114-2EN 2" 8" (DN ) OTTOM PORTED 3-WY FLNGED LL VLVES 6" & 8" (DN 150 & 200) DM150F ILLS OF MTERILS ND PRTS LIST Part No. Part Name ody Material arbon steel (22) 316 Stainless steel (36) 1 ody arbon steel STM 216 Type W 316 Stainless steel STM 351 Type F8M 2 Insert arbon steel STM 216 Type W 316 Stainless steel STM 351 Type F8M 3 all 316 Stainless steel 4 Stem Stainless steel 5 Seat Elastomer backed filled PTFE 6 ody Seal PTFE 7 Stem Seal PTFE 9 ompression Plate arbon steel Stainless steel 11 onnet Stud Series Stainless steel 12 Indicator Stop 2 arbon steel Stainless steel 15 Handle 2 arbon steel 17 Identification Tag 300 Series Stainless steel 18 ompression Ring 300 Series Stainless steel 21 Set Screw Series Stainless steel 22 T Handle daptor 2 Malleable Iron 23 Set Screw Series Stainless steel 24 Stem Screw Series Stainless steel 25 Washer Series Stainless steel 31 O-Ring una-n or Viton (as specified) 40 Driv-Lock in Series Stainless steel 50 Spring Series Stainless steel 53 Positive Stop 2 arbon steel 60 Fl. Hd. Mach. Screw 2 arbon steel Note: 1 Different, longer stem used when actuator is mounted. Note: 2 Items not used when actuator is mounted. TEHNIL ULLETIN 4/12 13
14 METSO 114-2EN DIMENSIONS 6" & 8" (DN 150 & 200) DM150F (including 2TR & 3TR) 12 & J G 1,G 2 E 3 5 P T T K 31 Seat Profile D = olt ircles L = Size of Holes M = No. of Holes Dimensions, inches pprox. Size D E G 1 G 2 H J K L M P*** S Weight inches lbs Dimensions, mm pprox. Size D E G 1 G 2 H J K L M P*** S Weight DN kg TEHNIL ULLETIN 4/12
15 114-2EN 2" 8" (DN ) OTTOM PORTED 3-WY FLNGED LL VLVES 6" & 8" (DN 150 & 200) DM150F-2TR & 3TR ILLS OF MTERILS ND PRTS LIST Part No. Part Name ody Material arbon steel (22) 316 Stainless steel (36) 1 ody arbon steel STM 216 Type W 316 Stainless steel STM 351 Type F8M 2 Insert arbon steel STM 216 Type W 316 Stainless steel STM 351 Type F8M 3 all 316 Stainless steel 4 Stem Stainless steel 5 Seat Elastomer backed filled PTFE 6 ody Seal PTFE 7 Stem Seal PTFE 9 ompression Plate 2 arbon steel Stainless steel 10 Hex Jam Nut 2 arbon steel 11 onnet Stud Series Stainless steel 12 Indicator Stop 2 arbon steel Stainless steel 15 Handle 2 arbon steel 17 Identification Tag 300 Series Stainless steel 21 Set Screw Series Stainless steel 22 T Handle daptor 2 Malleable Iron 23 Set Screw Series Stainless steel 24 Stem Screw 2 arbon steel 25 Washer 2 arbon steel 31 O-Ring una-n or Viton (as specified) Note: 1 Different, longer stem used when actuator is mounted. Note: 2 Items not used when actuator is mounted. TEHNIL ULLETIN 4/12 15
16 METSO 114-2EN DIMENSIONS 6" & 8" (DN 150 & 200) DM150F (including 2TR & 3TR) 12 & J 2 G 1,G 2 E 3 5 P T T 31 Seat Profile K D = olt ircles L = Size of Holes M = No. of Holes Dimensions, inches pprox. Size D E G 1 G 2 H J K L M P*** S Weight inches lbs Dimensions, mm pprox. Size D E G 1 G 2 H J K L M P*** S Weight DN kg TEHNIL ULLETIN 4/12
17 114-2EN 2" 8" (DN ) OTTOM PORTED 3-WY FLNGED LL VLVES 6" & 8" (DN 150 & 200) DM150F-2TR & 3TR ILLS OF MTERILS ND PRTS LIST Part No. Part Name ody Material arbon steel (22) 316 Stainless steel (36) 1 ody arbon steel STM 216 Type W 316 Stainless steel STM 351 Type F8M 2 Insert arbon steel STM 216 Type W 316 Stainless steel STM 351 Type F8M 3 all 316 Stainless steel 4 Stem Stainless steel 5 Seat Elastomer backed filled PTFE 6 ody Seal PTFE 7 Stem Seal PTFE 9 ompression Plate arbon steel Stainless steel 11 onnet Stud Series Stainless steel 12 Indicator Stop 2 arbon steel Stainless steel 15 Handle 2 arbon steel 17 Identification Tag 300 Series Stainless steel 18 ompression Ring 300 Series Stainless steel 21 Set Screw Series Stainless steel 22 T Handle daptor 2 Malleable Iron 23 Set Screw Series Stainless steel 24 Stem Screw 2 arbon steel 25 Washer 2 arbon steel 31 O-Ring una-n or Viton (as specified) 40 Driv-Lock in Series Stainless steel 50 Spring Series Stainless steel 53 Positive Stop 2 arbon steel 60 Fl. Hd. Mach. Screw Series Stainless steel Note: 1 Different, longer stem used when actuator is mounted. Note: 2 Items not used when actuator is mounted. TEHNIL ULLETIN 4/12 17
18 METSO 114-2EN These torque charts for valves equipped with filled PTFE (M) Double lock and leed seats are to be used as a guide for actuator selection. Note: with these 3-way valves, differential pressure will exist only when one of the side ports is blocked. n actuator should be selected that provides the same or greater torque output than that shown in the chart below. Refer to bulletins on Jamesbury pneumatic and electric actuators for torque output values and actuator selection tables. VLVE TORQUE DT dditional requirements may be imposed by media characteristics, trim, and frequency of valve operation. For clean lubricating fluid service, required torque may be reduced 33% when the valve is equipped with corrosion resistant trim. For difficult services (slurries, semi-solids) increase values by 50%. If in doubt, select the next larger actuator. 2" 8" (DN ) 3-Way D& M Seat Torque Values " (DN 200) 6" (DN 150) 1355 Recommended ctuator Torque FT LS " (DN 100) 3" (DN 80) 2" (DN 50) Recommended ctuator Torque N m Maximum Differential Pressure, psi TUTORS Pneumatic actuators that include both double-acting and spring-return types are available. Metso rand actuators can only be used with M150F-2TR and DM150F-2TR (90 rotation) valves. Electric actuators are available in both watertight and hazardous location models. For description of actuator types, see the following bulletins: ctuator ulletin Manual Gear ctuators Spring Diaphragm Rotary ctuators VPVL Rack & Pinion ctuators V-Series Electric ctuators D-Series Electric ctuators TEHNIL ULLETIN 4/12
19 114-2EN 2" 8" (DN ) OTTOM PORTED 3-WY FLNGED LL VLVES HOW TO ORDER serv- To specify a Jamesbury 3-way valve it is necessary only to determine the size and material required for a particular ice. Then make a selection from each of the categories below to complete the proper catalog code " M 150 F 2TR D 2236 M T 52 EXMPLE: (ode in Parenthesis) 4" lass way flanged valve (M150F), 2 position valve with dual ported ball (2TR), double block and bleed seats (D), arbon steel body (22), 316 stainless steel trim (36), Filled PTFE seats (M), PTFE seals, and una- N O-rings: 4" M150F2TRD2236MT52 1 Size inches DN ody Style M 2" 4" (DN ) DM 6" 8" (DN ) 3 ody Rating 150 NSI lass onfiguration F ottom ported flanged body 5 onfiguration asic Design 2TR 3TR 2 position valve with dual ported ball 3 position valve with dual ported ball 6 onfiguration D Double block and bleed seats 7 ody/trim Material 2236 arbon steel body/316 Stainless steel trim Stainless steel body/316 Stainless steel trim 8 Seat Material M Filled PTFE 9 Seal Material T PTFE 10 O-Ring / Stem Selection 2" thru 8" 52 una N 53 Viton O DO 6" thru 8" una N with operating stem Viton with operating stem 1 Not available with 2TR/3TR ball TEHNIL ULLETIN 4/12 19
20 Metso utomation Inc. Europe, Vanha Porvoontie 229, P.O. ox 304, FI Vantaa, Finland. Tel Fax North merica, 44 owditch Drive, P.O. ox 8044, Shrewsbury, M 01545, US. Tel Fax South merica, v. Independéncia, Iporanga, , Sorocaba-São Paulo razil. Tel Fax /49 sia Pacific, 20 Kallang venue, Lobby, #06-00, PIO reative entre, Singapore , Singapore. Tel Fax hina, 19/F, the Exchange eijing, No. 118, Jianguo Lu Yi, haoyang Dist, eijing, hina. Tel Fax Middle East, Roundabout 8, Unit -07, P.O. ox 17175, Jebel li Freezone, Dubai, United rab Emirates. Tel Fax Subject to change without prior notice.
6D15 DIGESTER CAPPING VALVES
6D15 DIGESTER CPPING VLVES The JMESURY 6D15 digester capping valves provide automatic opening and closing of batch digesters for chip fill. y automating this operation, complete computer control of a batch
More information1/4" 2" (DN 8 50) Clincher Series 2000 Threaded-End Ball Valves
/" " (DN 8 50) Clincher Series 000 Threaded-End Ball Valves Clincher Series 000 ball valves are rugged highperformance threaded-end ball valves designed to handle an extremely wide variety of liquids,
More informationEMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 1075
EMERGENCY SHUTOFF ND FIRESFE VLVES FIGURE 1075 The Jamesbury brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 1075 are manual assemblies consisting of the Jamesbury Fire-Tite
More information4" 9RET/REL FULL-PORT BOTTOM- OUTLET VALVES (AAR NO. E079011)
4" 9RET/REL FULL-PORT BOTTOM- OUTLET VLVES (R NO. E079011) DESCRIPTION The new 4" 9RET and 9REL flanged ball valves are reduced weight bottom-outlet valves and are available in a wide variety of materials
More informationNELES RA SERIES V-PORT SEGMENT VALVE
NELES R SERIES V-PORT SEGMENT VLVE Metso's Neles V-port valve in the R-series is primarily intended as a control valve, but it can also be used for shut-off service. The R-series V-port segment valve is
More information1/4 2 (DN 8 50) CLINCHER SERIES 2000 THREADED-END BALL
/ (DN 8 50) CLINCER SERIES 00 TREDED-END BLL VLVES CLINCER Series 00 ball valves are rugged highperformance threaded-end ball valves designed to handle an extremely wide variety of liquids, gases, and
More informationJAMESBURY EASYFLOW JT SERIES ANGLE STEM TANK BOTTOM VALVES
JAMESBURY EASYFLOW JT SERIES ANGLE STEM TANK BOTTOM VALVES JT series angle stem tank bottom valves provide a compact assembly with additional space for actuator clearance on insulated vessels. Large port
More informationM1/M2 POCKET FEEDER. Compact design DESIGN FEATURES. Special ball and seat design. Large ball pocket capacity. Automatic cycling
M1/M2 POCKET FEEDER The latest member in the M1/M2 ball valve series is the Pocket Feeder, for separator service. It is designed for automatic removal of sand and other fine debris from process. Typical
More informationSeries 7000 & 9000 Ball Valves
Series 7000 & 9000 Ball Valves Series 7000 8" (DN 00) Class 50 Standard Bore Series 9000 " 6" (DN 50 50) Class 50 Full Bore Series 9000 " 4" (DN 50 00) Class 00 Full Bore Installation, Maintenance and
More informationReduced Bore Thread-end Ball Valves Series 33R Model C. 1/2 2 (DN 15-50) AAR No. E079024
Reduced Bore Thread-end Ball Valves Series 33R Model C 1/2 2 (DN 15-50) AAR No. E079024 IMO-R25 3/2014 2 IMO-R25 Table of Contents 1 GENERAL.................................... 3 1.1 Scope of the Manual........................
More informationNELES RE2-SERIES V-PORT SEGMENT VALVE
NELES RE2-SERIES V-PORT SEGMENT VALVE Metso's Neles RE2-Series control valves are economical high performance valves in a quarterturn design. They are offered with a variety of trim options from standard
More informationGAS AND OIL SHUTOFF VALVES - FIGURE 1052
GS ND OI SUTO VVES - IGURE 1052 The MESURY Gas and Oil Shutoff s are M (actory Mutual) approved for providing protection against fire and explosive hazards during light-off and operation of fuel burning
More information1/4" 2" (DN 8 50) A-STYLE MODEL D THREADED END 2000 CWP BALL VALVE
/" " (DN 8 ) A-STYLE MODEL D THREADED END 000 CWP BALL VALVE The A-Style ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve. This ball valve's
More informationEMISSION-PAK SERIES 7000 AND 9000 BALL VALVES
EMISSION-PAK SERIES 7000 AND 9000 BALL VALVES The Emission-Pak provides a simple and economical method to meet emissions standards. It is supplied as a factory mounted valve assembly. The Emission-Pak
More informationFLANGED BALL VALVES ASME CLASS 150 & 300
FLNGED BLL VLVES SME CLSS 150 & REDUCED BORE: 1/2 (DN 15 500) SERIES 7000 The Jamesbury polymer-seated flanged ball valves provide industry leading performance and reliability. Offered in a wide variety
More informationJamesbury High-Performance Actuators. Maximizing cycle life. Lowering Costs.
Jamesbury High-Performance Actuators Maximizing cycle life. Lowering Costs. High-performance actuators. Safe, smooth and trouble-free operation. Metso offers a wide range of high-performing actuators designed
More informationMAPAG Butterfly valve - Type BK For cryogenic applications. Installation, Maintenance and Operating Instructions
MAPAG Butterfly valve - Type BK For cryogenic applications Installation, Maintenance and Operating Instructions 2 BK 70 en 8/2010 2 2 BK 70 en Content 1 Method of operation... 3 2 Cleaning and maintenance...
More informationFEATURES. Quadra-Powr torque outputs range from 11 to 587 FT LBS (15 to 796 N m), depending on actuator selection and available supply pressure.
QUDR-POWR X SPRING-DIPHRGM RORY CUORS Exclusively developed for quarter-turn valve service, spring-diaphragm actuators provide safe reliable operation even when minimal supply pressures are available.
More informationSERIES 2 4 (DN ) 6300, 2 6 (DN ) 6150, 6 (DN 150) 5300 & 530S, 6 & 8 (DN 150 & 200) 5150 BALL VALVES
SERIES 2 4 (DN 50 100) 6300, 2 6 (DN 50 150) 6150, 6 (DN 150) 5300 & 530S, 6 & 8 (DN 150 & 200) 5150 BALL VALVES Installation, Maintenance and Operating Instructions IMO-055 EN 11/2017 2 IMO-055 EN TABLE
More information3, 4 & 6 (DN 80, 100 & 150) CLASS 150 & 300 STANDARD BORE SERIES 7150, 730S & 7300 FLANGED BALL VALVES EQUIPPED WITH KEROTEST HANDLE ASSEMBLIES
3, 4 & 6 (DN 80, 100 & 150) CLASS 150 & 300 STANDARD BORE SERIES 7150, 730S & 7300 FLANGED BALL VALVES EQUIPPED WITH KEROTEST HANDLE ASSEMBLIES Installation, Maintenance and Operating Instructions IMO-261
More informationSERIES CLASS 300 FULL-BORE REACTOR DISCHARGE VALVES. Installation, Maintenance and Operating Instructions
SERIES 9000 2-4 CLASS 300 FULL-BORE REACTOR DISCHARGE VALVES Installation, Maintenance and Operating Instructions IMO-277 EN 11/2017 2 IMO-277 EN TABLE OF CONTENTS 1. GENERAL... 3 2. INSTALLATION... 3
More information1/4" 2" (DN 8 50) ELIMINATOR 2000 CWP AND ANSI CLASS 600 THREADED END BALL VALVE
/" " (DN ) ELIMINATOR 00 CWP AND ANSI CLASS 600 THREADED END BALL VALVE The Eliminator ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve.
More informationStandard Bore Flanged Ball Valves Series 7150, 730S & , 4 & 6 (DN 80, 100 & 150) Class 150 & 300
Standard Bore Flanged Ball Valves Series 7150, 730S & 7300 3, 4 & 6 (DN 80, 100 & 150) Class 150 & 300 Installation, Maintenance and Operating Instructions IMO-299 EN 9/2017 2 IMO-299 EN TABLE OF CONTENTS
More informationSEGMENT VALVE, RA WAFER AND RB FLANGED
SEGMENT LE, R WFER ND RB FLNGED The segment valve in the R-series is primarily intended as a control valve, but it can also be used for shut-off service. The R-series segment valve is a good general control
More informationSERIES 835 PROCESS-RATED CLASS 150 WAFER-SPHERE HIGH-PERFORMANCE BUTTERFLY VALVES
SERIES 835 PROCESS-RATED CLASS 150 WAFER-SPHERE HIGH-PERFORMANCE BUTTERFLY VALVES Series 835 process-rated ANSI Class 150 high-performance Wafer-Sphere butterfly valves are an excellent cost-effective
More informationVALV-POWR SERIES VPVL MODEL C DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS
VALV-POWR SERIES VPVL MODEL C DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS VALV-POWR VPVL double-opposed piston actuators combine the benefits of high cycle life, a rugged
More informationICV & ICVA Flanged Injection Control Valves 2 (DN 50) Type Installation, Maintenance and Operating Instructions
ICV & ICVA Flanged Injection Control Valves 2 (DN 50) Type 1500 Installation, Maintenance and Operating Instructions IMO-282 EN 11/2017 2 IMO-282 EN TABLE OF CONTENTS 1. GENERAL... 2. INSTALLATION... 2.1
More information3 AND 4 CLASS 300 STANDARD BORE SERIES 730S AND 7300 REACTOR DISCHARGE VALVES. Installation, Maintenance and Operating Instructions
3 AND 4 CLASS 300 STANDARD BORE SERIES 730S AND 7300 REACTOR DISCHARGE VALVES Installation, Maintenance and Operating Instructions IMO-278 EN 11/2017 2 IMO-278 EN TABLE OF CONTENTS 1. GENERAL... 3 2. INSTALLATION...
More information3-Way Flanged Ball Valves Series AM150FD & AM150FB Model A 3 & 4 (DN80 & 100) Class 150. Installation, Maintenance and Operating Instructions
3-Way Flanged Ball Valves Series AM150FD & AM150FB Model A 3 & 4 (DN80 & 100) Class 150 Installation, Maintenance and Operating Instructions IMO-237 EN 3/2018 2 IMO-237 EN TABLE OF CONTENTS 1. GENERAL...
More informationCryogenic Wafer-Sphere Butterfly Valves
Cryogenic Wafer-Sphere Butterfly Valves 3"-12" Installation, Maintenance and Operating Instructions IMO-16 4/2015 2 IMO-13 Table of Contents DESCRIPTION..................................... 3 Eccentric
More informationRailroad Ball Valves Series 5REB3
Railroad Ball Valves Series 5REB3 4" (DN 00) Installation, Maintenance and Operating Instructions IMO-R4 /05 IMO-R4 Table of Contents GENERAL.................................... 3. Scope of the Manual........................
More informationjamesbury Bulletin A107-1 Issue 7/2006
1-SERIES PNEUMTIC CYLINDER CTUTORS 1-Series piston actuators are available in either doubleacting or spring-return versions. The Series 1C and 1J provide for mounting in accordance with ISO 5211/1. These
More information3-Way Flanged Ball Valves 6, 8 & 10 (DN150, 200 & 250) Model D Series DM150FD 6 & 8 (DN150 & 200) Series DM150FB Model D
3-Way Flanged Ball Valves 6, 8 & 10 (DN150, 200 & 250) Model D Series DM150FD 6 & 8 (DN150 & 200) Series DM150FB Model D Class 150 Installation, Maintenance and Operating Instructions IMO-238 EN 3/2018
More information1/4 2 (DN 8 50) ELIMINATOR 2000 CWP AND ASME CLASS 600 THREADED END BALL VALVE
1/ (DN 8 ) ELIMINATOR 00 CWP AND ASME CLASS 600 THREADED END BALL VALVE The Eliminator ball valve offers our best technology and performance in a two-piece threaded end valve. This ball valve s unique
More informationVALV-POWR SERIES VPVL MODEL D DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS
VALV-POWR SERIES VPVL MODEL D DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS The Jamesbury Valv-Powr VPVL double-opposed piston actuators combine the benefits of high cycle
More informationDIN FLANGED BALL VALVES
DIN FLANGED BALL VALVES FULL BORE: DN 15 150 PN 16 PN 40 SERIES 9000 ( 916D, 940D) The Jamesbury polymeric-seated flanged ball valves feature a flexible-lip seat design that provides positive bi-directional
More informationMANUAL GEAR ACTUATORS
MANUAL GEAR ACTUATORS Type M Series and MA manual gear actuators are recommended for use on JAMESBURY ball and butterfly valves. For the sake of convenience, and where lever-handles present space problems,
More informationREACTOR DISCHARGE VALVES S & DIGESTER BLOW VALVES SB & 5300SB B FLANGED BALL VALVES
REACTOR DISCHARGE VALVES 8-12 530S & 5300 6-10 6300 DIGESTER BLOW VALVES 8-12 530SB & 5300SB 6-10 6300B FLANGED BALL VALVES Installation, Maintenance and Operating Instructions IMO-295 EN 11/2017 2 IMO-302
More informationVALV-POWR VALUE-LINE DOUBLE-OPPOSED PISTON ACTUATORS MODEL A. Installation, Maintenance and Operating Instructions
VALV-POWR VALUE-LINE DOUBLE-OPPOSED PISTON ACTUATORS MODEL A Installation, Maintenance and Operating Instructions IMO-529 EN /208 2 IMO-529 EN TABLE OF CONTENTS. GENERAL... 3 2. TECHNICAL DATA... 3 3.
More informationKTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
More informationHAND WHEEL OPERATOR For cylinder actuators Types B1C_K/L/R and B1C_RK/RL/RR Installation, Maintenance and Operating Instructions
HAND WHEEL OPERATOR For cylinder actuators Types B1C_K/L/R and B1C_RK/RL/RR Installation, Maintenance and Operating Instructions 6 B 72 en 9/2015 2 6 B 72 en Table of Contents 1 GENERAL... 3 2 SAFETY PRECAUTIONS...
More information3-Way Flanged Ball Valves Series AM150FD & AM150FB Model A
3-Way Flanged Ball Valves Series AM150FD & AM150FB Model A 2 (DN50) Class 150 Installation, Maintenance and Operating Instructions IMO-236 EN 3/2018 2 IMO-236 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Scope
More informationNELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS
NELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS Metso's Neles BO series butterfly valve is designed for use in vacuum Pressure Swing Adsorption
More informationJAMESBURY VALVCON ESR-SERIES ELECTRONIC SPRING RETURN ELECTRIC ACTUATOR
JAMESBURY VALVCON ESR-SERIES ELECTRONIC SPRING RETURN ELECTRIC ACTUATOR Metso is a leading designer and provider of Valvcon compact, reliable, electronically controlled electric actuators for valves and
More information3-Way Flanged Ball Valves 12 (DN300) Series DM150FD Model A
3-Way Flanged Ball Valves 12 (DN300) Series DM150FD Model A Class 150 Installation, Maintenance and Operating Instructions IMO-239 EN 3/2018 2 IMO-239 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Scope of
More informationWafer-Sphere 14" 20" Butterfly Valve. Installation, Maintenance and Operating Instructions
Wafer-Sphere 14" 20" Butterfly Valve Installation, Maintenance and Operating Instructions IMO-15 2/2015 2 IMO-15 Table of Contents DESCRIPTION..................................... 3 Eccentric Shaft Design
More informationNELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More informationTank Car Fire-Tite Top-Loading and Unloading Valves
Tank Car Fire-Tite Top-Loading and Unloading Valves 1 & 2 7RRR & 7RRT, 2 7RRU Installation, Maintenance and Operating Instructions IMO-R21 EN 11/2017 2 IMO-R21 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1
More informationJamesbury Wafer-Sphere World s Best Gate Crasher
Jamesbury Wafer-Sphere World s Best Gate Crasher Metso North America Not Just Another Butterfly Valve. The Wafer-Sphere is not just another butterfly valve. It is a high-performance valve that offers significant
More informationNELES RE-SERIES V-PORT SEGMENT VALVE
NELES RE-SERIES V-PORT SEGMENT VALVE Metso's Neles RE series V-port segment valve are economical high performance valves in a quarterturn design. They are offered with a variety of trim options from standard
More informationPNEUMATIC CYLINDER UNIT. Series CP Installation, Maintenance and Operating Instructions
PNEUMATIC CYLINDER UNIT Series CP Installation, Maintenance and Operating Instructions 6 CP 70 en 12/2008 2 6 CP 70 en Table of Contents 1 GENERAL... 3 1.1 Scope of instructions... 3 1.2 Cylinder unit
More informationJAMESBURY VALVCON QX-SERIES ELECTRIC ACTUATOR
JAMESBURY VALVCON QX-SERIES ELECTRIC ACTUATOR Metso is a leading designer and provider of Jamesbury Valvcon compact, reliable, electronically controlled electric actuators for valves and dampers. We offer
More informationVALVCON Universal ADC-Series Sealed Lead Acid Back-Up Battery Upgrade Kits. Installation, Maintenance and Operating Instructions
VALVCON Universal ADC-Series Sealed Lead Acid Back-Up Battery Upgrade Kits Installation, Maintenance and Operating Instructions IMO-I4830 EN 9/2018 2 IMO-I4830 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1
More information1/4" 2" (DN 8 50) ELIMINATOR 2000 CWP AND ANSI CLASS 600 THREADED END BALL VALVE
/" " (DN 8 0) ELIMINATOR 00 CWP AND ANSI CLASS 00 THREADED END BALL VALVE The Eliminator ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve.
More informationSeries VC Pneumatic cylinder actuators
Series VC Pneumatic cylinder actuators Metso`s Neles series VC actuators are exclusively developed for linear valves. The VC double acting cylinder type actuators are designed for use in both modulating
More informationPolymerization High cycle valves
APPLICATION REPORT Polymerization High cycle valves Emergency safety vent Feed control Gas to flare High cycle valve area Monomer, comonomer, hydrogen CLOSEOPEN Reactor train Catalyst Catalyst control
More informationJT SERIES ANGLE STEM TANK BOTTOM BALL VALVE DN25 DN150. Installation, Maintenance and Operating Instructions
JT SERIES ANGLE STEM TANK BOTTOM BALL VALVE DN25 DN150 Installation, Maintenance and Operating Instructions IMO-235 EN 3/2019 2 IMO-235 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Scope of the Manual... 3
More informationNELES R-SERIES SEGMENT VALVE Flanged RE and Wafer RE1
NELES R-SERIES SEGMENT VALVE Flanged RE and Wafer RE1 Metso's Neles RE series control valves are economical, high performance valves in a quarterturn design. They are offered with a variety of trim options
More informationCONSTRUCTION, PARTS AND MATERIALS P-SERIES ACTUATORS
Sheet No.: 1.101.30 Rev. Date: January 2012 ONSTRUTION, PRTS ND MTERILS P-SERIES TUTORS P Parts Materials Executions Nr. Description Qty. Description Specification Std S.S. Shaft SR 1 ody 1 luminum lloy
More informationControl Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions
Control Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions 4 GV 74 en 11/2013 2 4 GV 74 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3
More informationICV & ICVA Injection Control Valves Series 4000 Model C. Installation, Maintenance and Operating Instructions
ICV & ICVA Injection Control Valves Series 4000 Model C Installation, Maintenance and Operating Instructions IMO-258 EN 1/2018 2 IMO-258 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Safety Precautions... 3
More informationWafer-Sphere Butterfly Valves
Wafer-Sphere Butterfly Valves 3"-12" Series 8000, 8100, 8200 & 8300 Installation, Maintenance and Operating Instructions IMO-13 4/2015 2 IMO-13 Table of Contents DESCRIPTION.....................................
More informationVALUE-LINE 3-Piece Ball Valves Series 3A & 3C 1/2 2 (DN15-50) Installation, Maintenance and Operating Instructions
VALUE-LINE 3-Piece Ball Valves Series 3A & 3C 1/2 2 (DN15-50) Installation, Maintenance and Operating Instructions IMO-207 EN 3/2019 2 IMO-207 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Scope of the Manual...
More information3-Piece Ball Valves Series 4000 Model A
3-Piece Ball Valves Series 4000 Model A 1/2-2 (DN15-50) Installation, Maintenance and Operating Instructions IMO 202 EN 5/2017 2 IMO-202 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Scope of the Manual...
More informationSeries 7000 Railroad, Standard Bore Flanged Ball Valves
Series 7000 Railroad, Standard Bore Flanged Ball Valves Series 7150RR, 7300RR & 730SRR 3" 6" (DN 50 150) Class 150 & 3" (DN 50) Class 300 Installation, Maintenance and Operating Instructions IMO-R27 7/2016
More informationREACTOR DISCHARGE VALVES S AND WITH MD, QA AND QC CONVERSIONS AND ESSD STEM SEAL OPTION
REACTOR DISCHARGE VALVES - 12 530S AND 5300 6-10 6300 WITH MD, QA AND QC CONVERSIONS AND ESSD STEM SEAL OPTION Installation, Maintenance and Operating Instructions IMO-279 EN 11/2017 2 IMO-279 EN TABLE
More informationDelayed Coker Switch Ball Valve
Delayed Coker Switch Ball Valve Series Y4 8-16 Installation, Maintenance and Operating Instructions 1 Y4 70 EN 11/2017 2 1 Y4 70 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Safety Precautions... 3 1.2 Valve
More informationCLINCHER 2-Piece Thread-end Ball Valves Series 2000
CLINCHER 2-Piece Thread-end Ball Valves Series 2000 1/4 2 (DN6-50) Installation, Maintenance and Operating Instructions IMO-011 EN 2/2019 2 IMO-011 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Scope of the
More informationValv-Powr VPVL Mod C Value-Line Double-Opposed Piston Actuators. Installation, Maintenance and Operating Instructions
Valv-Powr VPVL Mod C Value-Line Double-Opposed Piston Actuators Installation, Maintenance and Operating Instructions IMO-528 EN 11/2017 2 IMO-528 EN TABLE OF CONTENTS 1. GENERAL... 3 2. TECHNICAL DATA...
More informationNELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More informationSteam cracking - furnaces
APPLICATION REPORT Steam cracking - furnaces Cracking furnaces Quench oil tower Quench water tower Gas compressors Caustic tower Gas driers Diluition steam Decoking line Feeds Cracked gas Waste gas Fuel
More informationMetso Product Portfolio Valve & Actuator Overview
Metso Product Portfolio Valve & Actuator Overview Metso Product Portfolio Valve & Actuator Overview Contents Wafer-Sphere Valves............................................... 3 Wafer-Sphere Troubleshooting
More informationCeramic Ball Valves. Series E2 and E6. Installation, Maintenance and Operating Instructions
Ceramic Ball Valves Series E2 and E6 Installation, Maintenance and Operating Instructions 1 E2 70 en 3/2015 2 1 E2 70 en Table of Contents 1 GENERL...3 1.1 Valve description...3 1.2 Valve markings...3
More informationFluid Catalytic Cracking Unit - FCCU
APPLICATION REPORT Fluid Catalytic Cracking Unit - FCCU Process overview Fluid Catalytic Cracking process is an important and widely used way to convert heavy feedstock into lighter, more valuable products.
More informationPNEUMATIC CYLINDER UNIT. Series CS Installation, Maintenance and Operating Instructions
PNEUMATIC CYLINDER UNIT Series CS Installation, Maintenance and Operating Instructions 6 CS 70 en 12/2008 2 6 CS 70 en Table of Contents 1 GENERAL... 3 1.1 Scope of instructions... 3 1.2 Cylinder unit
More informationPNEUMATIC CYLINDER ACTUATORS, SERIES B
PNEUMATIC CYLINDER ACTUATORS, SERIES B Metso's Neles double acting and spring return B-Series piston type actuators are designed for use in both modulating control and on-off service. The series B1C and
More informationDesign A61D TriAx Triple Offset High Performance Butterfly Valve
pril 2000 ulletin 51.6:61D Trix Design 61D Trix Triple Offset High Performance utterfly Valve Description The Design 61D Trix is a triple offset disk HPV designed for rugged isolation service, available
More informationjamesbury Bulletin B100-1 Issue 12/2003
/" " (DN 8 0) STYLE A MODEL D THREADED END 00 CWP BALL VALVE The A-Style ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve. This ball valve's
More informationIMO-200EN 09/2010. Trunnion mounted forged ball valves Model FF and GG. Installation, Maintenance and Operating Instructions IMO-200EN 09/2010
IMO-200EN 09/2010 Trunnion mounted forged ball valves Model FF and GG Installation, Maintenance and Operating Instructions IMO-200EN 09/2010 2 IMO-200EN Table of Contents I GENERAL INFORMATION...................
More informationFisher D and DA Control Valves
D and D Valves Product Bulletin Fisher D and D Control Valves Fisher D and D single port, high pressure valves are widely used in oil and gas production industries. These valves are especially useful for
More informationNELES HIGH CAPACITY TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L6
NELES HIGH CAPACITY TRIPLE ECCENTRIC DISC ALE, METAL SEATED NELDISC SERIES L6 Metso's Neles series L6 is a double flanged metal seated Neldisc triple eccentric disc valve with one piece body design, for
More informationNotes 1 Hard anodised aluminium alloy: AlZnMgCu1.5, DIN 1725/1 2 Deltatone Coating 3 Zinc plated and passivated 4 Stainless Steel AISI 304
Sheet No.: 1.101.30 Rev. ate: January 2012 ONSTRUTION, PRTS N MTERILS P-SERIES TUTORS P Parts Materials Executions Nr. escription Qty. escription Specification Std S.S. Shaft SR 1 ody 1 luminium lloy GlSi10Mg,
More informationModel B. Thermostatic Valves FEATURES APPLICATIONS FLOW RATES OF USGPM TAMPER-PROOF TEMPERATURE SETTINGS OF 55 F F
Model Thermostatic Valves FETURES FLOW RTES OF 68-1200 USGPM TMPER-PROOF TEMPERTURE SETTINGS OF 55 F - 240 F OMPLETELY SELF-ONTINED POSITIVE 3-WY VLVE TION VILLE IN ST IRON, DUTILE IRON, RONZE, STEEL,
More informationPropane Dehydrogenation Continuous catalyst regeneration applications
APPLICATION REPORT Propane Dehydrogenation Continuous catalyst regeneration applications Diagram is intended to be representation and not to be viewed as actual process flow diagram. Process overview The
More informationContinuous catalytic reforming catalyst valves
APPLICATION REPORT Continuous catalytic reforming catalyst valves Furnaces Reactors Catalyst removal Catalyst addition Removal Regenerator Feedstock Addition Reformate to fractionation Chlorine agent Fuel
More informationVanessa Series 30,000 Triple Offset Valves* Cryogenic Configuration
* ryogenic onfiguration virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations Features General applications
More informationSteam reforming. The product is then ready to be used in refinery applications or for synthesis of ammonia or methanol. APPLICATION REPORT CLOSEOPEN
APPLICATION REPORT Steam reforming Burner ESD valve Fuel gas/oil control valve Process air Process air inlet valve Shift converter pass valves Fuel Feed inlet valves Feed Secondary reformer High temperature
More information2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive
More information,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
More informationW94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection
Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2
More information2-WAY AND 3-WAY MOTORIZED VALVES FOR STEAM, VACUUM AND HOT WATER APPLICATIONS
R O R P O R T I O N -WY ND 3-WY MOTORIZED VLVES FOR STEM, VUUM ND HOT WTER PPLITIONS VLVE ND TUTOR FETURES Valve Sizes range from ½ inch to 8 inches -Way and 3-Way Single Seated and -Way Double Seated
More informationSPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
More informationBULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
ULLETIN 46.00-2 SEPTEMER 2009 OS OFFSET IS RESILIENT- SETE UTTERFLY VLVES TEHNIL SPEIFITIONS Materials of onstruction 2 s (50-) 8 9 7 Wafer and Lugged esign 10 3 Wafer ody Lugged ody 6 5 4 1 2 2 s (50-)
More informationDouble Acting Cylinder Actuator Series VC Installation, Maintenance and Operating Instructions
Double Acting Cylinder Actuator Series VC Installation, Maintenance and Operating Instructions 6 CA 70 en 11/2017 2 6 CA 70 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3 1.2 Structure
More informationInstallation, Maintenance and Operating Instructions
Trunnion Flanged Ball Valves Series 7000 & 9000 8 12 (DN 200-300) 9150, 9180 Model A 6 8 (DN 150-200) 9300, 9380 Model B 10 (DN 250) 7150, 7180 Model A 10-12 (DN 250-300) 9300, 9380 Model A 8 10 (DN 200
More informationK815W, K815L, K830W, K830L, K860W, & K860L Wafer-Sphere Butterfly Valve. Installation, Maintenance and Operating Instructions
K815W, K815L, K830W, K830L, K860W, & K860L Wafer-Sphere Butterfly Valve Installation, Maintenance and Operating Instructions IMO-319 EN 1/2018 2 IMO-319 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Description...
More informationMK Series High Performance Butterfly Submittal/Technical Data
MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas 77041
More informationControl Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions
Control Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions 4 GV 74 en 2/2017 2 4 GV 74 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3
More informationVB-9313 Series. Application. Features. Applicable Literature
V-9313 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Three-Way Mixing s General Instructions pplication V-9313 series three-way mixing valves control hot or chilled water in heating or
More informationNorth. Asia. America. Africa. South. America. Australia. Double Block and Bleed Dual Expanding Plug Valve
North merica Netherlands Europe sia frica South merica ustralia ouble lock and leed ual Expanding Plug Valve CERTIFICTES E X E CUT IO NS V Standard Execution 35 33 7 13 11 6 21 56 12 30 2 7 32 17 23 5
More information