1/4" 2" (DN 8 50) Clincher Series 2000 Threaded-End Ball Valves
|
|
- Steven Byrd
- 5 years ago
- Views:
Transcription
1 /" " (DN 8 50) Clincher Series 000 Threaded-End Ball Valves Clincher Series 000 ball valves are rugged highperformance threaded-end ball valves designed to handle an extremely wide variety of liquids, gases, and slurries. These compact valves have a two-piece body construction and are available with temperature ratings from -0 F to +500 F (-5 C to +0 C), depending on materials and pressure combinations. The body style is manufactured in brass. The Fire-Tite Series 3 is available in carbon steel or stainless steel. Clincher Series 000 Style valves are available specially prepared for critical services such as oxygen and high-vacuum. lso available are valves conforming to UL approved configurations. (See Bulletin T0-). FETURES Unique Flexible-Lip Seat Design n Exerts continuous pressure against ball for reliable sealing. n Fluid pressure on the ball increases the effectiveness of the seal on the downstream side. n utomatically compensates for wear and for changes in temperature and pressure for a high cycle life. Excellent Sealing n The compression of low friction PTFE box rings eliminates stem leakage by avoiding straight-line leakage paths. n Stem seal adjustment is done simply by tightening the stem nut. Easy Maintenance n Seats and seals are easily replaced; no machining is required. n Slotted stem and ball drive make assembly virtually mistake-proof. igh Flow Capacity n Large port diameters provide highest flow capacity per dollar of valve cost. Fire-Tite n Secondary metal seal provides effective shutoff in the event of a fire. n uxiliary graphite stem seal prevents stem leakage if the primary PTFE seal is destroyed. n Ideal for services such as furnace fuel lines, LP-gas product lines, and in a variety of petroleum and petrochemical piping systems. utomatic or Manual Operation n Quarter-turn operation ensures quick and easy cycling. n Low torque requirements mean smaller actuators. n variety of Jamesbury actuators and accessories are available mounted and tested on the valves for single-source responsibility. B0-EN 5/0
2 METSO B0-EN Internal entry stem. Self adjusting PTFE stem seals for high cycle life Extremely compact design for installation where space is at a premium Insulated handle always shows position of ball Leaktight PTFE body seal unaffected by temperature fluctuations Large port for higher flow capacity Four-bolt design with locking fasteners for vibration resistance and joint integrity Rugged body designed to resist piping stresses and shock Wide blade drive for maximum ball engagement strength Double-Seal seat design gives repeatable, long-life shutoff No metal-to-metal moving parts No lubrication ever required SPECIFICTIONS Valve Seat Ratings These ratings are based on differential pressure with valve ball in the fully closed position and refer to seats only. Refer to valve body ratings to be sure that all components are satisfactory for the application. Valves in brass and carbon steel are suitable for service to -0 F (-9 C), valves in 3 stainless steel (with stainless steel body bolts) to -0 F (-5 C). Maximum Differential Pressure, psi Temperature C Saturated Steam These ratings are a conservative guide for general service. Previous experience in a process or new developments may permit applications at ratings above those shown. Please consult with the Metso home office for specific recommendations. T Temperature F M Maximum Differential Pressure, bar /" " (DN 8 50) Series 000 valves with filled PTFE (M) seats are rated for saturated steam service to 50 psi (7. bar) when equipped with stainless steel trim. M-seated valves are otherwise steam-rated to 00 psi (3.79 bar). inches Cv inches / 9 3/8 -/ 9 / -/ 00 3/ 37 5 DN Kv Flow data The table below provides flow coefficients of valves covered in this bulletin. The Cv values represent the flow of water at +0 F through the valve in U.S. gallons per minute at a pressure drop of psi. The metric equivalent, Kv, is the flow of water at C through the valve in m 3 /hr at a pressure drop of kg/cm. To convert Cv to Kv, multiply by DN Cv Kv TECNICL BULLETIN 5/
3 B0-EN /" " (DN8 50) CLINCER SERIES 000 SCREWED-END BLL VLVES These are maximum working pressure ratings of valve body/body cap assemblies only. The seat ratings above determine the practical pressure limitations according to Valve Body Ratings actual service conditions. Working pressure rating is at -0 F to +00 F (-9 C to +38 C). Test pressure is for hydrostatic test with ball half open. Maximum Working Pressure with Specified Body Material Brass Body Carbon Steel, 3 Stainless Body STM 9, 93 Gr.B7 300 Series SS STM 9 Body Bolts Body Bolts Body Bolts Code: -0 Codes: -0, - Code: -3 Rating psi bar psi bar psi bar /" " Working pressure (DN 8 5) Test pressure /" " Working pressure (DN 30 50) Test pressure SPECIL SERVICES Detailed information about available seat materials, special services, and accessories for Clincher Series 000 valves is contained in the following bulletins (see page for ordering standard accessories): Steam service B50- Oxygen service B50-3 Vacuum service B50- Torq-andle spring-return handles B0- Ball valve seat materials T0- Use these torque charts for Clincher valves as a guide for actuator selection. Select an actuator that provides the same or greater torque output than that shown in the charts below. Refer to pneumatic and electric actuator bulletins for torque output values and actuator selection tables. TORQUE REQUIREMENTS dditional requirements may be imposed by media characteristics, trim, and frequency of valve operation. For clean lubricating fluid service, required torque for PTFE (T) and filled PTFE (M) sealed valves only may be reduced 0% when the valve is equipped with 3 stainless steel trim. For difficult service (slurries, semi-solids) increase values by 50%. If in doubt, select the next larger actuator. Maximum Differential Pressure, bar Maximum Differential Pressure, bar Recommended ctuator Torque FT LBS PTFE (T) SETED VLVES /", 3/8", /" (DN 8, 0, 5) " (DN 50) -/" (DN 0) -/" (DN 30) " (DN 5) 3/" (DN 0) Recommended ctuator Torque N m Recommended ctuator Torque FT LBS FILLED PTFE (M) SETED VLVES " (DN 50) -/" (DN 0) -/" (DN 30) " (DN 5) 3/" (DN 0) /", 3/8", /" (DN 8, 0, 5) Recommended ctuator Torque N m Maximum Differential Pressure, psi Maximum Differential Pressure, psi TECNICL BULLETIN 5/ 3
4 METSO B0-EN S Blade L J G E Dia F Octagon M Typ. B D pproximate Dimensions inches Valve pprox. Size ll other ll other Weight Brass Materials Brass Materials inches lb B B D E F G J K L M S / / / / / / pproximate Dimensions mm Valve pprox. Size ll other ll other Weight Brass Materials Brass Materials DN kg B B D E F G J K L M S TECNICL BULLETIN 5/
5 B0-EN /" " (DN8 50) CLINCER SERIES 000 SCREWED-END BLL VLVES PRTS ND BILLS OF MTERILS FOR CLINCER VLVES MTERIL Part Part No. Name Standard Fire-Tite Style -**** Style 3- Style 3-3 Brass STM B83 Carbon steel Stainless steel STM Body STM lloy GR. CF8M GR. WCB Body Cap Brass STM B83 Carbon steel STM Stainless steel STM lloy 377 GR. WCB 35 GR. CF8M 3 Ball Brass***, 3 Stainless steel 3 Stainless steel Stem Brass***, 3 Stainless steel 3 Stainless steel 5 Seat PTFE or filled PTFE as specified Body seal PTFE Spiral Wound 3 Stainless steel and PTFE 7 Secondary Stem Seal Not required Graphite 8 Upper Stem Seal PTFE Stem Nut Carbon steel Stainless steel 7 andle Carbon steel or Stainless steel** Carbon steel 9 Shakeproof Washer Carbon steel or stainless steel Compression Ring Brass 3 Stainless steel Lower Stem Seal PTFE 3 Spring Washer* Carbon steel-zinc plated 5 Body Bolt STM 9 or 300 series stainless STM 93 Gr. B7 53 ex Nut Carbon steel or 300 series stainless STM 93 Gr. 55 Lockwasher Carbon steel 70 Top Ground Spring Stainless steel * Furnished only on " (DN 5) and larger valves with brass or 3 stainless steel ball. ** Stainless steel on valves with stainless steel body bolts. Valves furnished with actuators are equipped with STM 93 Gr. B7 bolts. *** /" 3/" (DN 8 0) brass valves equipped with actuator must have 3 stainless steel trim. **** ttention: The state of California has determined lead and lead compounds are known to cause cancer, birth defects and reproductive harm. The state of California prohibits the use of brass valves for drinking water service. TECNICL BULLETIN 5/ 5
6 METSO B0-EN Metso offers a full line of integrally designed actuators for automated systems or for easier control of inaccessible or remote valves. Pneumatic actuators, including both double-acting and spring-return types, and electric actuators are available for all valves. Electric actuators are available in both watertight and hazardous location models. For further information on actuators for Clincher valves see the following technical bulletins: CTUTOR Type Bulletin Spring-Diaphragm ctuators 0- Valv-Powr Series VP-VL Double-Opposed Piston ctuators -5 V-Series Electric ctuators 00- DC-Series Electric ctuators 0- LCU-Series Electric ctuators 0- LCR-Series Electric ctuators 03- Locking Devices CCESSORIES Stem Extensions When security measures are necessary for handling hazardous or valuable fluids, or are needed for applications covered by certain government regulations, reliable locking devices can be provided to hold the valves inoperative. The following table provides kit numbers for ordering purposes. standard " (0. mm) stem extension is offered for Series 000 valves for improved accessibility, particularly when used in insulated pipelines. (These extensions should not be confused with extended bonnets customarily used on cryogenic valves.) Stem extensions can be provided factory mounted or shipped separately for field mounting. Locking Devices Part inches DN Number / 3/ 8 0 LD53 -/ 5 30 LD5 -/ 0 50 LD55 Stem Extension Part inches DN Number / 3/ 8 0 SE03 -/ 5 30 SE0 -/ 0 50 SE05 Insulation Jacket andle shown in locked closed position " (0. mm) TECNICL BULLETIN 5/
7 B0-EN /" " (DN8 50) CLINCER SERIES 000 SCREWED-END BLL VLVES Series 000 ball valves are optionally available equipped with circular handles instead of lever handles for use when the valves are to be installed in confined piping arrangements where there is insufficient space for 90 lever operation. They Round andles are also ideal for cases where projecting lever handles are prohibited. These handles have a plastic coating on the gripping area for added comfort and insulation. They are available in carbon or stainless steel. Round andle Dimensions inches Part Number inches Stainless Steel Carbon Steel / 3/ / / Round andle Dimensions mm Part Number DN Stainless Steel Carbon Steel Centerline of valve When piping is to be insulated, Clincher ball valves can be equipped with D-ring handles. They provide for easy operation of the valve with the piping and all but the D-Ring andles bonnet surface of the valve fully insulated, assuring minimum loss or absorption. D-Ring andle Dimensions inches inches Part Number B / / BK / BK BK / BK / B.3 (7) D-Ring andle Dimensions mm DN Part Number B 8 5 BK BK BK BK Centerline of valve TECNICL BULLETIN 5/ 7
8 OW TO ORDER Catalog numbers are fully descriptive of a valve. They are made up of size and a ten-digit figure designation with coding as shown below: T T 0 Size inches /, 3/8,/, 3/,, -/, -/, DN 08, 0, 5, 0, 5, 30, 0, 50 5 Trim Material 00 Same as body material* (Carbon steel not available) 3 3 Stainless steel Body Style Standard screwed end (Brass only) 3 Fire-Tite screwed end Seat Materials T PTFE M Filled PTFE 3 Special Service V igh vacuum (Brass only) VC igh vacuum certified (Brass only) O (No entry if standard) (Brass only) Body Material Brass* Carbon steel*** 3 3 Stainless steel*** 7 Seal Material T PTFE 8 Body Fasteners Bolts Nuts 0 STM 9 Carbon Steel STM 93 STM 9 Gr. B7 Gr series stainless steel** * /" 3/" (DN 8 0) brass valves equipped with actuator must have 3 stainless trim. ** Not suitable for fire-tested applications *** Only available as Fire-Tite Required for Fire-Tite (3-) valves. Clincher, Double-Seal and Fire-Tite are trademarks of Jamesbury. Subject to change without prior notice. Metso Flow Control Inc. Europe, Vanha Porvoontie 9, P.O. Box 30, FI-030 Vantaa, Finland. Tel Fax North merica, Bowditch Drive, P.O. Box 80, Shrewsbury, M 055, US. Tel Fax South merica, v. Independéncia, 500- Iporanga, , Sorocaba-São Paulo Brazil. Tel Fax /9 sia Pacific, aw Par Centre #0-0, 80 Clemenceau venue, Singapore 399. Tel Fax China, /F, China Youth Plaza, No.9 North Rd of East 3rd Ring Rd, Chaoyang District, Beijing 0000, China. Tel Fax Middle East, Roundabout 8, Unit B-07, P.O. Box 775, Jebel li Freezone, Dubai, United rab Emirates. Tel Fax
1/4 2 (DN 8 50) CLINCHER SERIES 2000 THREADED-END BALL
/ (DN 8 50) CLINCER SERIES 00 TREDED-END BLL VLVES CLINCER Series 00 ball valves are rugged highperformance threaded-end ball valves designed to handle an extremely wide variety of liquids, gases, and
More informationEMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 1075
EMERGENCY SHUTOFF ND FIRESFE VLVES FIGURE 1075 The Jamesbury brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 1075 are manual assemblies consisting of the Jamesbury Fire-Tite
More information1/4" 2" (DN 8 50) A-STYLE MODEL D THREADED END 2000 CWP BALL VALVE
/" " (DN 8 ) A-STYLE MODEL D THREADED END 000 CWP BALL VALVE The A-Style ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve. This ball valve's
More information1/4 2 (DN 8 50) ELIMINATOR 2000 CWP AND ASME CLASS 600 THREADED END BALL VALVE
1/ (DN 8 ) ELIMINATOR 00 CWP AND ASME CLASS 600 THREADED END BALL VALVE The Eliminator ball valve offers our best technology and performance in a two-piece threaded end valve. This ball valve s unique
More information1/4" 2" (DN 8 50) ELIMINATOR 2000 CWP AND ANSI CLASS 600 THREADED END BALL VALVE
/" " (DN ) ELIMINATOR 00 CWP AND ANSI CLASS 600 THREADED END BALL VALVE The Eliminator ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve.
More informationEMISSION-PAK SERIES 7000 AND 9000 BALL VALVES
EMISSION-PAK SERIES 7000 AND 9000 BALL VALVES The Emission-Pak provides a simple and economical method to meet emissions standards. It is supplied as a factory mounted valve assembly. The Emission-Pak
More informationJAMESBURY EASYFLOW JT SERIES ANGLE STEM TANK BOTTOM VALVES
JAMESBURY EASYFLOW JT SERIES ANGLE STEM TANK BOTTOM VALVES JT series angle stem tank bottom valves provide a compact assembly with additional space for actuator clearance on insulated vessels. Large port
More informationFEATURES. 3 position models can be equipped with special 180 operators offering two 90 steps.
2" 8" (DN 50 200) OTTOM PORTED 3-WY FLNGED LL VLVES Jamesbury bottom ported 3-way ball valves provide a variety of flow paths not commonly found in other 3-way designs.the basic design is suitable for
More informationjamesbury Bulletin B100-1 Issue 12/2003
/" " (DN 8 0) STYLE A MODEL D THREADED END 00 CWP BALL VALVE The A-Style ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve. This ball valve's
More information1/4" 2" (DN 8 50) ELIMINATOR 2000 CWP AND ANSI CLASS 600 THREADED END BALL VALVE
/" " (DN 8 0) ELIMINATOR 00 CWP AND ANSI CLASS 00 THREADED END BALL VALVE The Eliminator ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve.
More informationNELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More information4" 9RET/REL FULL-PORT BOTTOM- OUTLET VALVES (AAR NO. E079011)
4" 9RET/REL FULL-PORT BOTTOM- OUTLET VLVES (R NO. E079011) DESCRIPTION The new 4" 9RET and 9REL flanged ball valves are reduced weight bottom-outlet valves and are available in a wide variety of materials
More informationSERIES 835 PROCESS-RATED CLASS 150 WAFER-SPHERE HIGH-PERFORMANCE BUTTERFLY VALVES
SERIES 835 PROCESS-RATED CLASS 150 WAFER-SPHERE HIGH-PERFORMANCE BUTTERFLY VALVES Series 835 process-rated ANSI Class 150 high-performance Wafer-Sphere butterfly valves are an excellent cost-effective
More informationReduced Bore Thread-end Ball Valves Series 33R Model C. 1/2 2 (DN 15-50) AAR No. E079024
Reduced Bore Thread-end Ball Valves Series 33R Model C 1/2 2 (DN 15-50) AAR No. E079024 IMO-R25 3/2014 2 IMO-R25 Table of Contents 1 GENERAL.................................... 3 1.1 Scope of the Manual........................
More informationSERIES CLASS 300 FULL-BORE REACTOR DISCHARGE VALVES. Installation, Maintenance and Operating Instructions
SERIES 9000 2-4 CLASS 300 FULL-BORE REACTOR DISCHARGE VALVES Installation, Maintenance and Operating Instructions IMO-277 EN 11/2017 2 IMO-277 EN TABLE OF CONTENTS 1. GENERAL... 3 2. INSTALLATION... 3
More informationDIN FLANGED BALL VALVES
DIN FLANGED BALL VALVES FULL BORE: DN 15 150 PN 16 PN 40 SERIES 9000 ( 916D, 940D) The Jamesbury polymeric-seated flanged ball valves feature a flexible-lip seat design that provides positive bi-directional
More informationFLANGED BALL VALVES ASME CLASS 150 & 300
FLNGED BLL VLVES SME CLSS 150 & REDUCED BORE: 1/2 (DN 15 500) SERIES 7000 The Jamesbury polymer-seated flanged ball valves provide industry leading performance and reliability. Offered in a wide variety
More informationNELES RA SERIES V-PORT SEGMENT VALVE
NELES R SERIES V-PORT SEGMENT VLVE Metso's Neles V-port valve in the R-series is primarily intended as a control valve, but it can also be used for shut-off service. The R-series V-port segment valve is
More information6D15 DIGESTER CAPPING VALVES
6D15 DIGESTER CPPING VLVES The JMESURY 6D15 digester capping valves provide automatic opening and closing of batch digesters for chip fill. y automating this operation, complete computer control of a batch
More informationNELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS
NELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS Metso's Neles BO series butterfly valve is designed for use in vacuum Pressure Swing Adsorption
More informationRailroad Ball Valves Series 5REB3
Railroad Ball Valves Series 5REB3 4" (DN 00) Installation, Maintenance and Operating Instructions IMO-R4 /05 IMO-R4 Table of Contents GENERAL.................................... 3. Scope of the Manual........................
More informationSERIES 2 4 (DN ) 6300, 2 6 (DN ) 6150, 6 (DN 150) 5300 & 530S, 6 & 8 (DN 150 & 200) 5150 BALL VALVES
SERIES 2 4 (DN 50 100) 6300, 2 6 (DN 50 150) 6150, 6 (DN 150) 5300 & 530S, 6 & 8 (DN 150 & 200) 5150 BALL VALVES Installation, Maintenance and Operating Instructions IMO-055 EN 11/2017 2 IMO-055 EN TABLE
More informationNELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More informationVALV-POWR SERIES VPVL MODEL D DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS
VALV-POWR SERIES VPVL MODEL D DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS The Jamesbury Valv-Powr VPVL double-opposed piston actuators combine the benefits of high cycle
More informationCLINCHER 2-Piece Thread-end Ball Valves Series 2000
CLINCHER 2-Piece Thread-end Ball Valves Series 2000 1/4 2 (DN6-50) Installation, Maintenance and Operating Instructions IMO-011 EN 2/2019 2 IMO-011 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Scope of the
More informationM1/M2 POCKET FEEDER. Compact design DESIGN FEATURES. Special ball and seat design. Large ball pocket capacity. Automatic cycling
M1/M2 POCKET FEEDER The latest member in the M1/M2 ball valve series is the Pocket Feeder, for separator service. It is designed for automatic removal of sand and other fine debris from process. Typical
More informationSeries 7000 & 9000 Ball Valves
Series 7000 & 9000 Ball Valves Series 7000 8" (DN 00) Class 50 Standard Bore Series 9000 " 6" (DN 50 50) Class 50 Full Bore Series 9000 " 4" (DN 50 00) Class 00 Full Bore Installation, Maintenance and
More informationNELES RE2-SERIES V-PORT SEGMENT VALVE
NELES RE2-SERIES V-PORT SEGMENT VALVE Metso's Neles RE2-Series control valves are economical high performance valves in a quarterturn design. They are offered with a variety of trim options from standard
More informationTank Car Fire-Tite Top-Loading and Unloading Valves
Tank Car Fire-Tite Top-Loading and Unloading Valves 1 & 2 7RRR & 7RRT, 2 7RRU Installation, Maintenance and Operating Instructions IMO-R21 EN 11/2017 2 IMO-R21 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1
More informationJamesbury High-Performance Actuators. Maximizing cycle life. Lowering Costs.
Jamesbury High-Performance Actuators Maximizing cycle life. Lowering Costs. High-performance actuators. Safe, smooth and trouble-free operation. Metso offers a wide range of high-performing actuators designed
More informationEMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 1075
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 107 The JAMESBURY brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 107 are manual assemblies consisting of the JAMESBURY FIRE-TITE
More informationREACTOR DISCHARGE VALVES S & DIGESTER BLOW VALVES SB & 5300SB B FLANGED BALL VALVES
REACTOR DISCHARGE VALVES 8-12 530S & 5300 6-10 6300 DIGESTER BLOW VALVES 8-12 530SB & 5300SB 6-10 6300B FLANGED BALL VALVES Installation, Maintenance and Operating Instructions IMO-295 EN 11/2017 2 IMO-302
More information3, 4 & 6 (DN 80, 100 & 150) CLASS 150 & 300 STANDARD BORE SERIES 7150, 730S & 7300 FLANGED BALL VALVES EQUIPPED WITH KEROTEST HANDLE ASSEMBLIES
3, 4 & 6 (DN 80, 100 & 150) CLASS 150 & 300 STANDARD BORE SERIES 7150, 730S & 7300 FLANGED BALL VALVES EQUIPPED WITH KEROTEST HANDLE ASSEMBLIES Installation, Maintenance and Operating Instructions IMO-261
More informationHAND WHEEL OPERATOR For cylinder actuators Types B1C_K/L/R and B1C_RK/RL/RR Installation, Maintenance and Operating Instructions
HAND WHEEL OPERATOR For cylinder actuators Types B1C_K/L/R and B1C_RK/RL/RR Installation, Maintenance and Operating Instructions 6 B 72 en 9/2015 2 6 B 72 en Table of Contents 1 GENERAL... 3 2 SAFETY PRECAUTIONS...
More information3-Piece Ball Valves Series 4000 Model A
3-Piece Ball Valves Series 4000 Model A 1/2-2 (DN15-50) Installation, Maintenance and Operating Instructions IMO 202 EN 5/2017 2 IMO-202 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Scope of the Manual...
More informationStandard Bore Flanged Ball Valves Series 7150, 730S & , 4 & 6 (DN 80, 100 & 150) Class 150 & 300
Standard Bore Flanged Ball Valves Series 7150, 730S & 7300 3, 4 & 6 (DN 80, 100 & 150) Class 150 & 300 Installation, Maintenance and Operating Instructions IMO-299 EN 9/2017 2 IMO-299 EN TABLE OF CONTENTS
More informationNELES RE-SERIES V-PORT SEGMENT VALVE
NELES RE-SERIES V-PORT SEGMENT VALVE Metso's Neles RE series V-port segment valve are economical high performance valves in a quarterturn design. They are offered with a variety of trim options from standard
More informationICV & ICVA Flanged Injection Control Valves 2 (DN 50) Type Installation, Maintenance and Operating Instructions
ICV & ICVA Flanged Injection Control Valves 2 (DN 50) Type 1500 Installation, Maintenance and Operating Instructions IMO-282 EN 11/2017 2 IMO-282 EN TABLE OF CONTENTS 1. GENERAL... 2. INSTALLATION... 2.1
More informationSeries VC Pneumatic cylinder actuators
Series VC Pneumatic cylinder actuators Metso`s Neles series VC actuators are exclusively developed for linear valves. The VC double acting cylinder type actuators are designed for use in both modulating
More information3 AND 4 CLASS 300 STANDARD BORE SERIES 730S AND 7300 REACTOR DISCHARGE VALVES. Installation, Maintenance and Operating Instructions
3 AND 4 CLASS 300 STANDARD BORE SERIES 730S AND 7300 REACTOR DISCHARGE VALVES Installation, Maintenance and Operating Instructions IMO-278 EN 11/2017 2 IMO-278 EN TABLE OF CONTENTS 1. GENERAL... 3 2. INSTALLATION...
More informationICV & ICVA Injection Control Valves Series 4000 Model C. Installation, Maintenance and Operating Instructions
ICV & ICVA Injection Control Valves Series 4000 Model C Installation, Maintenance and Operating Instructions IMO-258 EN 1/2018 2 IMO-258 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Safety Precautions... 3
More informationVALV-POWR SERIES VPVL MODEL C DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS
VALV-POWR SERIES VPVL MODEL C DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS VALV-POWR VPVL double-opposed piston actuators combine the benefits of high cycle life, a rugged
More informationMAPAG Butterfly valve - Type BK For cryogenic applications. Installation, Maintenance and Operating Instructions
MAPAG Butterfly valve - Type BK For cryogenic applications Installation, Maintenance and Operating Instructions 2 BK 70 en 8/2010 2 2 BK 70 en Content 1 Method of operation... 3 2 Cleaning and maintenance...
More informationGAS AND OIL SHUTOFF VALVES - FIGURE 1052
GS ND OI SUTO VVES - IGURE 1052 The MESURY Gas and Oil Shutoff s are M (actory Mutual) approved for providing protection against fire and explosive hazards during light-off and operation of fuel burning
More informationPolymerization High cycle valves
APPLICATION REPORT Polymerization High cycle valves Emergency safety vent Feed control Gas to flare High cycle valve area Monomer, comonomer, hydrogen CLOSEOPEN Reactor train Catalyst Catalyst control
More informationSteam reforming. The product is then ready to be used in refinery applications or for synthesis of ammonia or methanol. APPLICATION REPORT CLOSEOPEN
APPLICATION REPORT Steam reforming Burner ESD valve Fuel gas/oil control valve Process air Process air inlet valve Shift converter pass valves Fuel Feed inlet valves Feed Secondary reformer High temperature
More informationVALVCON Universal ADC-Series Sealed Lead Acid Back-Up Battery Upgrade Kits. Installation, Maintenance and Operating Instructions
VALVCON Universal ADC-Series Sealed Lead Acid Back-Up Battery Upgrade Kits Installation, Maintenance and Operating Instructions IMO-I4830 EN 9/2018 2 IMO-I4830 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1
More informationREACTOR DISCHARGE VALVES S AND WITH MD, QA AND QC CONVERSIONS AND ESSD STEM SEAL OPTION
REACTOR DISCHARGE VALVES - 12 530S AND 5300 6-10 6300 WITH MD, QA AND QC CONVERSIONS AND ESSD STEM SEAL OPTION Installation, Maintenance and Operating Instructions IMO-279 EN 11/2017 2 IMO-279 EN TABLE
More informationNELES R-SERIES SEGMENT VALVE Flanged RE and Wafer RE1
NELES R-SERIES SEGMENT VALVE Flanged RE and Wafer RE1 Metso's Neles RE series control valves are economical, high performance valves in a quarterturn design. They are offered with a variety of trim options
More informationSeries 7000 Railroad, Standard Bore Flanged Ball Valves
Series 7000 Railroad, Standard Bore Flanged Ball Valves Series 7150RR, 7300RR & 730SRR 3" 6" (DN 50 150) Class 150 & 3" (DN 50) Class 300 Installation, Maintenance and Operating Instructions IMO-R27 7/2016
More informationJamesbury Wafer-Sphere World s Best Gate Crasher
Jamesbury Wafer-Sphere World s Best Gate Crasher Metso North America Not Just Another Butterfly Valve. The Wafer-Sphere is not just another butterfly valve. It is a high-performance valve that offers significant
More informationSERIES 815 ANSI CLASS 150 AND SERIES 830 ASME CLASS 300 WAFER-SPHERE HIGH PERFORMANCE BUTTERFLY VALVES
SERIES 81 ANSI CLASS 10 AND SERIES 830 ASME CLASS 300 WAFER-SPHERE HIGH PERFORMANCE BUTTERFLY VALVES Jamesbury Wafer-Sphere high-performance butterfly valves provide long-lasting tight shutoff capability,
More informationSERIES 815 ANSI CLASS 150 AND SERIES 830 ANSI CLASS 300 WAFER-SPHERE HIGH PERFORMANCE BUTTERFLY VALVES
Distributed by: collinspipe.com SERIES 1 ANSI CLASS AND SERIES 30 ANSI CLASS 300 WAFER-SPHERE HIGH PERFORMANCE BUTTERFLY VALVES Jamesbury Wafer-Sphere high-performance butterfly valves provide long-lasting
More informationSeries 7000 & 9000 Ball Valves Non-Trunnion
Series 7000 & 9000 Ball Valves Non-Trunnion Series 7150 8" (DN 200) Class 150 Standard Bore Series 9000 2" 6" (DN 50 150) Class 150 Full Bore Series 9000 2" 4" (DN 50 100) Class 300 Full Bore Installation,
More informationJT SERIES ANGLE STEM TANK BOTTOM BALL VALVE DN25 DN150. Installation, Maintenance and Operating Instructions
JT SERIES ANGLE STEM TANK BOTTOM BALL VALVE DN25 DN150 Installation, Maintenance and Operating Instructions IMO-235 EN 3/2019 2 IMO-235 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Scope of the Manual... 3
More informationFlanged Ball Valves Series 5000 Model B & C. Series 6000 Model B & C. ½ - 2 (DN15-50) Class 150 & 300. ½ 1 ½ (DN15-40) Class 150 & 300
Flanged Ball Valves Series 5000 Model B & C ½ - 2 (DN15-50) Class 150 & 300 Series 6000 Model B & C ½ 1 ½ (DN15-40) Class 150 & 300 Installation, Maintenance and Operating Instructions IMO-50 EN 4/2018
More informationVALV-POWR VALUE-LINE DOUBLE-OPPOSED PISTON ACTUATORS MODEL A. Installation, Maintenance and Operating Instructions
VALV-POWR VALUE-LINE DOUBLE-OPPOSED PISTON ACTUATORS MODEL A Installation, Maintenance and Operating Instructions IMO-529 EN /208 2 IMO-529 EN TABLE OF CONTENTS. GENERAL... 3 2. TECHNICAL DATA... 3 3.
More informationCryogenic Wafer-Sphere Butterfly Valves
Cryogenic Wafer-Sphere Butterfly Valves 3"-12" Installation, Maintenance and Operating Instructions IMO-16 4/2015 2 IMO-13 Table of Contents DESCRIPTION..................................... 3 Eccentric
More informationVALUE-LINE 3-Piece Ball Valves Series 3A & 3C 1/2 2 (DN15-50) Installation, Maintenance and Operating Instructions
VALUE-LINE 3-Piece Ball Valves Series 3A & 3C 1/2 2 (DN15-50) Installation, Maintenance and Operating Instructions IMO-207 EN 3/2019 2 IMO-207 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Scope of the Manual...
More informationControl Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions
Control Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions 4 GV 74 en 2/2017 2 4 GV 74 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3
More informationMETSO NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED SERIES BW
METSO NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED SERIES BW Neles BW series metal seated triple eccentric disc valve with one piece body design, for both control and tight shut-off
More informationFLANGED BALL VALVES ASME CLASS 150 & 300 STANDARD BORE:
FLANGED BALL VALVES ASME CLASS 150 & STANDARD BORE: 1/2" " (DN 15 ) SERIES 7000 The Jamesbury polymeric-seated flanged ball valves offer a patented flexible-lip seat design that provides positive bi-directional
More informationCrude and vacuum distillation
APPLICATION REPORT Crude and vacuum distillation Crude oil Wash water Reflux drum Overhead flare valve Gas to flare Steam Non-condens - able gases Water Desalter Stripping steam Light naphtha Separator
More informationFLANGED BALL VALVES ASME CLASS 150 & 300 STANDARD BORE:
FLANGED BALL VALVES ASME CLASS 1 & STANDARD BORE: 1/2" " (DN 15 0) SERIES 7000 The Jamesbury polymeric-seated flanged ball valves offer a patented flexible-lip seat design that provides positive bi-directional
More informationFLANGED BALL VALVES ASME CLASS 150 & 300 FULL BORE:
FLANGED BALL VALVES ASME CLASS 1 & FULL BORE: 1/2" 24" (DN 15 600) SERIES 9000 The Jamesbury polymeric-seated flanged ball valves offer a patented flexible-lip seat design that provides positive bi-directional
More information3-Way Flanged Ball Valves Series AM150FD & AM150FB Model A
3-Way Flanged Ball Valves Series AM150FD & AM150FB Model A 2 (DN50) Class 150 Installation, Maintenance and Operating Instructions IMO-236 EN 3/2018 2 IMO-236 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Scope
More informationInstallation, Maintenance and Operating Instructions
Trunnion Flanged Ball Valves Series 7000 & 9000 8 12 (DN 200-300) 9150, 9180 Model A 6 8 (DN 150-200) 9300, 9380 Model B 10 (DN 250) 7150, 7180 Model A 10-12 (DN 250-300) 9300, 9380 Model A 8 10 (DN 200
More information3-Way Flanged Ball Valves 6, 8 & 10 (DN150, 200 & 250) Model D Series DM150FD 6 & 8 (DN150 & 200) Series DM150FB Model D
3-Way Flanged Ball Valves 6, 8 & 10 (DN150, 200 & 250) Model D Series DM150FD 6 & 8 (DN150 & 200) Series DM150FB Model D Class 150 Installation, Maintenance and Operating Instructions IMO-238 EN 3/2018
More informationDelayed Coker Switch Ball Valve
Delayed Coker Switch Ball Valve Series Y4 8-16 Installation, Maintenance and Operating Instructions 1 Y4 70 EN 11/2017 2 1 Y4 70 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Safety Precautions... 3 1.2 Valve
More informationControl Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions
Control Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions 4 GV 74 en 11/2013 2 4 GV 74 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3
More informationMANUAL GEAR ACTUATORS
MANUAL GEAR ACTUATORS Type M Series and MA manual gear actuators are recommended for use on JAMESBURY ball and butterfly valves. For the sake of convenience, and where lever-handles present space problems,
More informationControl Valves Globe-Unbalanced Single Seated, Series GU Installation, Maintenance and Operating Instructions
Control Valves Globe-Unbalanced Single Seated, Top Guide Series GU Installation, Maintenance and Operating Instructions 4 GV 71 en 9/2017 2 4 GV 71 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3
More informationNELES HIGH CAPACITY TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L6
NELES HIGH CAPACITY TRIPLE ECCENTRIC DISC ALE, METAL SEATED NELDISC SERIES L6 Metso's Neles series L6 is a double flanged metal seated Neldisc triple eccentric disc valve with one piece body design, for
More informationJAMESBURY VALVCON QX-SERIES ELECTRIC ACTUATOR
JAMESBURY VALVCON QX-SERIES ELECTRIC ACTUATOR Metso is a leading designer and provider of Jamesbury Valvcon compact, reliable, electronically controlled electric actuators for valves and dampers. We offer
More informationWafer-Sphere 14" 20" Butterfly Valve. Installation, Maintenance and Operating Instructions
Wafer-Sphere 14" 20" Butterfly Valve Installation, Maintenance and Operating Instructions IMO-15 2/2015 2 IMO-15 Table of Contents DESCRIPTION..................................... 3 Eccentric Shaft Design
More information3-Way Flanged Ball Valves 12 (DN300) Series DM150FD Model A
3-Way Flanged Ball Valves 12 (DN300) Series DM150FD Model A Class 150 Installation, Maintenance and Operating Instructions IMO-239 EN 3/2018 2 IMO-239 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Scope of
More informationValv-Powr VPVL Mod C Value-Line Double-Opposed Piston Actuators. Installation, Maintenance and Operating Instructions
Valv-Powr VPVL Mod C Value-Line Double-Opposed Piston Actuators Installation, Maintenance and Operating Instructions IMO-528 EN 11/2017 2 IMO-528 EN TABLE OF CONTENTS 1. GENERAL... 3 2. TECHNICAL DATA...
More information3-Way Flanged Ball Valves Series AM150FD & AM150FB Model A 3 & 4 (DN80 & 100) Class 150. Installation, Maintenance and Operating Instructions
3-Way Flanged Ball Valves Series AM150FD & AM150FB Model A 3 & 4 (DN80 & 100) Class 150 Installation, Maintenance and Operating Instructions IMO-237 EN 3/2018 2 IMO-237 EN TABLE OF CONTENTS 1. GENERAL...
More informationGVI Series Industrial Globe Valves for Flow Control
Series Industrial Globe Valves for Flow Control 2-way Flow Control Globe Valves ssured utomations Series Industrial Globe Valves are contructed with rugged carbon steel or stainless steel bodies. They
More informationControl Valves Globe-Omega, Multistage trim Series GM Installation, Maintenance and Operating Instructions
Control Valves Globe-Omega, Multistage trim Series GM Installation, Maintenance and Operating Instructions 4 GV 70 en 2/2017 2 4 GV 70 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3 1.2
More informationNELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More informationFLANGED BALL VALVES ANSI CLASS 150 & 300 FULL BORE:
FLANGED BALL VALVES ANSI CLASS 150 & FULL BORE: 1/2 12 (DN 15 ) SERIES 9000 14 24 (DN 350 600) AND LARGER SERIES 6000 The JAMESBURY polymeric-seated flanged ball valves offer a patented flexible-lip seat
More informationSEGMENT VALVE, RA WAFER AND RB FLANGED
SEGMENT LE, R WFER ND RB FLNGED The segment valve in the R-series is primarily intended as a control valve, but it can also be used for shut-off service. The R-series segment valve is a good general control
More informationjamesbury Bulletin A107-1 Issue 7/2006
1-SERIES PNEUMTIC CYLINDER CTUTORS 1-Series piston actuators are available in either doubleacting or spring-return versions. The Series 1C and 1J provide for mounting in accordance with ISO 5211/1. These
More informationJAMESBURY VALVCON ESR-SERIES ELECTRONIC SPRING RETURN ELECTRIC ACTUATOR
JAMESBURY VALVCON ESR-SERIES ELECTRONIC SPRING RETURN ELECTRIC ACTUATOR Metso is a leading designer and provider of Valvcon compact, reliable, electronically controlled electric actuators for valves and
More informationWafer-Sphere Butterfly Valves
Wafer-Sphere Butterfly Valves 3"-12" Series 8000, 8100, 8200 & 8300 Installation, Maintenance and Operating Instructions IMO-13 4/2015 2 IMO-13 Table of Contents DESCRIPTION.....................................
More informationNELES FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS
NELES FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RAINGS Metso's Neles modular ball valve series M1, offers optimized performance of pulp and paper applications. Series M, incorporates Metso's leading
More informationContinuous catalytic reforming catalyst valves
APPLICATION REPORT Continuous catalytic reforming catalyst valves Furnaces Reactors Catalyst removal Catalyst addition Removal Regenerator Feedstock Addition Reformate to fractionation Chlorine agent Fuel
More informationCeramic Ball Valves. Series E2 and E6. Installation, Maintenance and Operating Instructions
Ceramic Ball Valves Series E2 and E6 Installation, Maintenance and Operating Instructions 1 E2 70 en 3/2015 2 1 E2 70 en Table of Contents 1 GENERL...3 1.1 Valve description...3 1.2 Valve markings...3
More informationPropane Dehydrogenation Continuous catalyst regeneration applications
APPLICATION REPORT Propane Dehydrogenation Continuous catalyst regeneration applications Diagram is intended to be representation and not to be viewed as actual process flow diagram. Process overview The
More informationPNEUMATIC CYLINDER UNIT. Series CP Installation, Maintenance and Operating Instructions
PNEUMATIC CYLINDER UNIT Series CP Installation, Maintenance and Operating Instructions 6 CP 70 en 12/2008 2 6 CP 70 en Table of Contents 1 GENERAL... 3 1.1 Scope of instructions... 3 1.2 Cylinder unit
More informationSpecifications. Body Materials: Carbon steel, stainless steel, chrome-moly steel, other castable alloys
CONTROL VLVES KOSO HMMEL DHL B U L L E T I N V 5 0 / 5 0 - FETURES Globe bodies for in-line service; angle bodies for difficult service. Each body style accepts all standard trim sets. Balanced plugs for
More informationValve & Actuator Solutions
Jamesbury Valve & Actuator Solutions Our Promise: Quality Reliability Performance Safety Metso s Jamesbury Products Table of Contents Ball Valves Overview....4 Flanged Ball Valves...6 Threaded-End Ball
More informationCAPPING VALVE. Series PZ Installation, Maintenance and Operating Instructions
CAPPING VALVE Series PZ Installation, Maintenance and Operating Instructions 8 PZ 70 en 4/2016 2 8 PZ 70 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3 1.2 Valve construction...3 1.3 Valve
More informationPNEUMATIC CYLINDER ACTUATORS, SERIES B1
PNEUMATIC CYLINDER ACTUATORS, SERIES B1 Metso's Neles double acting and spring return B1-Series piston type actuators are designed for use in both modulating control and on-off service. The series B1C
More informationK815W, K815L, K830W, K830L, K860W, & K860L Wafer-Sphere Butterfly Valve. Installation, Maintenance and Operating Instructions
K815W, K815L, K830W, K830L, K860W, & K860L Wafer-Sphere Butterfly Valve Installation, Maintenance and Operating Instructions IMO-319 EN 1/2018 2 IMO-319 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1 Description...
More informationSteam cracking - furnaces
APPLICATION REPORT Steam cracking - furnaces Cracking furnaces Quench oil tower Quench water tower Gas compressors Caustic tower Gas driers Diluition steam Decoking line Feeds Cracked gas Waste gas Fuel
More informationDouble Acting Cylinder Actuator Series VC Installation, Maintenance and Operating Instructions
Double Acting Cylinder Actuator Series VC Installation, Maintenance and Operating Instructions 6 CA 70 en 11/2017 2 6 CA 70 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3 1.2 Structure
More informationWafer-Sphere Butterfly Valve Series K815W, K815L, K830W & K830L Model A Cryogenic
Wafer-Sphere Butterfly Valve Series K815W, K815L, K830W & K830L Model A Cryogenic 3" - 12" (DN 80-300) Class 150 & 300 Installation, Maintenance and Operating Instructions IMO-304 6/2016 2 IMO-304 Table
More informationInstallation, Maintenance and Operating Instructions
Flanged Ball Valves Series 9150, 9180 Model C, Class 150, Full Bore 2, 3, 4 & 6 (DN50, 80, 100 & 150) Series 9300, 9380 Model C, Class 300, Full Bore 2, 3 & 4 (DN50, 80 & 150) Series 7150, 7180 Model C,
More information