FLANGED BALL VALVES ASME CLASS 150 & 300
|
|
- Egbert Bridges
- 6 years ago
- Views:
Transcription
1 FLNGED BLL VLVES SME CLSS 150 & REDUCED BORE: 1/2 (DN ) SERIES 7000 The Jamesbury polymer-seated flanged ball valves provide industry leading performance and reliability. Offered in a wide variety of materials to suit an extensive range of applications these valves are designed and manufactured with all our latest technology and expertise. Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as lloy, Hastelloy C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite Valves ll Jamesbury Fire-Tite flanged ball valves are qualified to PI 607 and ISO 497. This ensures minimal leakage in the event of a fire. CE marked CE marked and documented product conforming to the European Pressure Equipment Directive (PED) 14/68/EU and TEX Directive 14/34/EU is available as standard product. Features nd Benefits Robust engineering design yields leading cycle life Outstanding quality provides confidence Flexible lip seat provides bi-directional zero-leak shut-off and minimum maintenance Xtreme seats provide longer life and expanded pressure-temperature capability Patented stem seal system engineered to provide superior emissions performance (1/2-2 ) Live loaded stem packing enhances emissions performance and reduces maintenance (1/2-8 ) ISO 5211 bonnet mounting design (1/2-8 ) PI 607 qualified PI 608 compliance & grounding as standard (3-8 ) ISO Class BH rated (1/2-8 ) Standard materials meet requirements of NCE MR03 and MR0175 (see p29 & 30) SIL 3 qualified Emission-Pak Valves Jamesbury Emission-Pak products feature a double stem seal packing system to provide additional sealing performance for critical services. This feature is ISO Class H rated. utomated ssemblies Valves, actuators, and accessories designed to mate together with precision ensures superior performance. B7-1 EN 9/17
2 B7-1 EN METSO SPECIFICTIONS Cv Flow Data The table at right provides flow coefficients for Jamesbury valves covered in this bulletin. Cv values represent the flow of water at +60 F through the valve in U.S. gallons per minute at a pressure drop of 1 psi. The metric equivalent, K v, is the flow of water at +16 C through the valve in cubic meters per hour at a pressure drop of 1 kg/cm 2. To convert Cv to Kv, multiply by Valve Body Ratings These are the maximum working pressure ratings of the valve body only. The seat ratings, shown on the next page, determine the practical temperature and pressure limitations according to actual service conditions. Test pressures are recommended pressures for hydrostatic test with ball half open. Inches DN Standard Bore 1/ / / /5400* /8500* ,000/9800* ,000/13,000* * Class long pattern Temp F Carbon steel 316 Stainless steel Maximum Working Pressure, psi Class 150 Class lloy Monel Carbon steel 316 Stainless steel - to Test Pressure Temp C Carbon steel 316 Stainless steel Maximum Working Pressure, bar Class 150 Class lloy Monel Carbon steel 316 Stainless steel -29 to Test Pressure Valve Seat Ratings Seat ratings, indicated by solid lines in the charts on the next page, are based on differential pressure with the valve ball in the fully closed position and refer to seats only. The dotted lines indicate maximum working pressures for WCB carbon steel valve bodies. (Maximum working pressures of other body materials are shown in the tables above.) The combination of dotted and solid lines indicates the maximum valve rating at specific pressure and temperature conditions. Valves with PTFE, Xtreme, PEEK, PF, and UHMW polyethylene seats can be used in service to -60 F (-51 C) provided that the valve body material is suitable for such a temperature. Carbon steel valves are rated to - F (-29 C). For saturated steam service, stainless steel trim is recommended at all pressures and is required above 0 psi (14 bar). See Bulletin B For more application information on seat materials, refer to Bulletin T Xtreme Performance and Value Xtreme seats provide longer life, expanded performance boundaries, and the greatest possible value. Xtreme material is unique, resulting from a technological breakthrough in our polymer research lab. The material is a proprietary fluoropolymer based blend that provides superior quarter-turn performance. 2 TECHNICL BULLETIN 9/17
3 FLNGED BLL VLVES SME CLSS 150 & B7-1 EN 1/2 2 (DN 15 50) Standard Bore 3 6 (DN ) Standard Bore Maximum Differential Pressure, psi Maximum Differential Pressure, psi Maximum Differential Pressure, psi Temperature F 8 (DN 0) Standard Bore Non-Trunnion Temperature C T B 0 U X Temperature F * SME Class Non-Trunnion is 275 psi (19 bar) max. (DN 250) Standard Bore Non-Trunnion 0 Temperature C Low Temperature Limit for Carbon Steel (WCB) Class U T X Temperature C Class 150 & Saturated Steam T & B 0 U X Temperature F * SME Class Non-Trunnion is 275 psi (19 bar) max. B Z Class 150 Saturated Steam L Saturated Steam Maximum Differential Pressure, bar Maximum Differential Pressure, bar Maximum Differential Pressure, bar Maximum Differential Pressure, psi Temperature C Maximum Differential Pressure, psi Temperature F Trunnion Valves 8 (DN 0 500) Standard Bore Temperature C Class Class U Class 150 T B Class Temperature F T Saturated Steam Saturated Steam X X L Maximum Differential Pressure, bar Maximum Differential Pressure, bar LEGEND: T = PTFE U = UHMW B = PF L = PEEK Z = TFM X = Xtreme TECHNICL BULLETIN 9/17 3
4 B7-1 EN METSO The Ultimate Process utomation Package for VPVL Pneumatic ctuators, V-Series, DC-Series and QX-Series Electric ctuators with 1/2 8 (DN 15 0) Standard Port Series 7000 Digital valve communication terminals for full automation capability vailable for general purpose and hazardous duty service Cast Series SS brackets for corrosion resistance Fully guided stem, coupling and precision bracket assures optimum form, fit and performance 17-4PH SS coupling for strength and corrosion resistance Compression plate and disc springs for high cycle thermal and pressure transients. Patented stem seal has 3 engineered sealing zones to provide multiple barriers for long term sealing (1/2" 2") Valves combined with Jamesbury actuators offer a total value and performance package. vailable with pneumatic Valv-Powr VPVL actuators, V-Series, DC-Series and QX-Series electric actuators and with StoneL Quartz utomation Performance and Value and Hawkeye digital monitors or VCTs, the packages have a wide range of applications. Visit our website at: 4 TECHNICL BULLETIN 9/17
5 FLNGED BLL VLVES SME CLSS 150 & B7-1 EN DIMENSIONS 1/2-2 (DN15-50) Series 7150 SME Class 150 and Series 7 & 730S SME Class (Non-Trunnion) 4 Holes Ø L on Ø M Bolt Circle 17 S Jamesbury OPEN 25, 26 K 16, 19, 29, ØR 4 6 J ØC 7, 13 F G H Ø E Port Dia. 2 Ø N thru both ends P No. of holes 3 5 B T Hex. Size X Ø D Bolt Circle Typ. both ends inches Series 7150 SME Class 150 pproximate Dimensions - inches ISO Bonnet pprox lb B C D E F G H J K L M N P R S T X 1/ M F / M F M F / M F M F DN Series 7150 SME Class 150 pproximate Dimensions - mm ISO Bonnet pprox kg B C D E F G H J K L M N P R S T X M F M F M F M F M F Series 7 & 730S SME Class pproximate Dimensions - inches pprox ISO 7 730S lb inches B C D E F G H J K L M N P R S T X Bonnet 730S 7 1/ M F / M F M F / M F M F Series 7 & 730S SME Class pproximate Dimensions - mm pprox ISO 7 730S kg DN B C D E F G H J K L M N P R S T X Bonnet 730S M F M F M F M F M F TECHNICL BULLETIN 9/17 5
6 B7-1 EN METSO Part No. 1 Body 2 Insert Part Name BILLS OF MTERILS ND PRTS LIST Fire-Tite 1/2 2 (DN15 50) Standard Port Series 7000 Valves Body Material Carbon Steel (22) Carbon steel STM 216 Carbon steel STM Stainless Steel (36) 316 Stainless steel STM 316 Stainless steel STM lloy (35) Type CN7M 3 Ball 316 Stainless steel, Monel, Hastelloy C lloy 4 Stem 316 Stainless steel, Monel, Hastelloy C lloy Monel (71) Type Type 5 Seat PTFE, Xtreme, PF 6 Body Seal TFM 7 Secondary Stem Seal Graphite 8 Primary Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PF seats) 13 Stem Bearing PTFE, Filled PTFE 16 Hex Nut Carbon steel (zinc plated) Series Stainless steel 17 Handle Carbon steel (zinc plated) Series Stainless steel 19 Lock Washer Carbon steel (zinc plated) Series Stainless steel Compression Plate 316 Stainless steel Monel 25 Socket Cap Screw Series Stainless steel 26 Handle Stop Spacer Series Stainless steel 29 Hex Cap Screw Series Stainless steel (Monel if Chlorine or NCE) Monel 31 Disc Springs Inconel Part No. 1 Body 2 Insert Part Name BILLS OF MTERILS ND PRTS LIST Non Fire-Tite 1/2 2 (DN 15 50) Standard Port Series 7000 Valves Body Material Carbon Steel (22) Carbon steel STM 216 Carbon steel STM Stainless Steel (36) 316 Stainless steel STM 316 Stainless steel STM lloy (35) 3 Ball 316 Stainless Steel, Monel, Hastelloy C lloy 4 Stem 316 Stainless Steel, Monel, Hastelloy C lloy Monel (71) Type Type 5 Seat PTFE, Xtreme, PF, PEEK 1 & UHMWPE 6 Body Seal TFM (w/xtreme seats), UHMWPE (w/uhmwpe seats), Graphite (w/peek seats) 8 Primary Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PF seats), UHMWPE (w/ UHMWPE seats), Graphite (w/peek seats) Stem Guide PEEK (PEEK seated valves) 16 Hex Nut Carbon steel (zinc plated) Series Stainless steel 17 Handle Carbon steel (zinc plated) Series Stainless steel 19 Lock Washer Carbon steel (zinc plated) Series Stainless steel Compression Plate 316 Stainless steel Monel 22 Identification Tag Stainless steel 23 Pop Rivet Stainless steel 24 Stem Bearing PTFE (w/ PTFE seats), Filled PTFE (w/ Xtreme & PF seats), PEEK (w/ PEEK seats), UHMWPE (w/uhmwpe seats) 25 Socket Cap Screw Series Stainless steel 26 Handle Stop Spacer Series Stainless steel 29 Hex Cap Screw Series Stainless steel (Monel if Chlorine or NCE) Monel 31 Disc Springs Inconel Note 1: 17-4 PH stems required with PEEK seats 6 TECHNICL BULLETIN 9/17
7 FLNGED BLL VLVES SME CLSS 150 & B7-1 EN DIMENSIONS 3-6 (DN80-150) Series 7150 SME Class 150 and Series 7 & 730S SME Class (Non-Trunnion) L M Bolt Circle R S Fire-Tite Non Fire-Tite H F C Typ. 71 E Port 1 T Typ B D = Bolt Circle N = Size of holes P = Number of holes inches Series 7150 SME Class 150 pproximate Dimensions - inches B C D E F H L M N P R S T ISO Pattern M F M F M F 124 DN Series 7150 SME Class 150 pproximate Dimensions - mm B C D E F H L M N P R S T ISO Pattern M F M F M F 56 lb kg inches 7 730S Series 7 & 730S SME Class pproximate Dimensions - inches B C D E F H L M N P R S T ISO Pattern 7 lb M F M F M F DN 7 730S Series 7 & 730S SME Class pproximate Dimensions - mm B C D E F H L M N P R S T ISO Pattern 7 kg M F M F M F S lb 730S kg TECHNICL BULLETIN 9/17 7
8 B7-1 EN METSO Part No. 1 Body 2 Insert Part Name BILLS OF MTERILS ND PRTS LIST Fire-Tite 3 6 (DN80 150) Standard Port Series 7000 Valves Body Material Carbon Steel (22) Carbon Steel STM 216 Carbon Steel STM Stainless Steel (36) 316 Stainless Steel STM 316 Stainless Steel STM lloy (35) 3 Ball 316 Stainless Steel, Monel, Hastelloy C lloy 4 Stem 316 Stainless Steel, Monel, Hastelloy C lloy Monel (71) 5 Seat PTFE, Xtreme, PF 6 Body Seal TFM 7 Secondary Stem Seal Graphite 8 Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PF seats) 13 Thrust Bearing PTFE, Filled PTFE Compression Plate Stainless Steel Monel 22 Identification Tag Stainless Steel 23 Pop Rivet Stainless Steel 29 Bonnet Stud STM 193 GR. B8, B8C, B8T or B8M, Monel 30 Bonnet Stud Nut STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 31 Disc Springs Inconel 70 Top Grounding Spring Stainless Steel 71 Bottom Grounding Spring Inconel 72 Retaining Ring Stainless Steel Part No. 1 Body 2 Insert Part Name BILLS OF MTERILS ND PRTS LIST Non Fire- Tite 3 6 ( DN ) Standard Port Series 7000 Valves Body Material Carbon Steel (22) Carbon Steel STM 216 Carbon Steel STM Stainless Steel (36) 316 Stainless Steel STM 316 Stainless Steel STM lloy (35) 3 Ball 316 Stainless Steel, Monel, Hastelloy C lloy 4 Stem 316 Stainless Steel, Monel, Hastelloy C lloy Monel (71) 5 Seat PTFE, Xtreme, PF, PEEK 2 & UHMWPE 6 Body Seal TFM (w/ PTFE, Xtreme, PF seats), UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats) 8 Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PF seats), UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats) 13 Thrust Bearing PTFE, Filled PTFE Compression Plate 316 Stainless Steel Monel 22 Identification Tag Stainless Steel 23 Pop Rivet Stainless Steel 24 Thrust Bearing PTFE (w/ PTFE seats), Filled PTFE (w/ Xtreme & PF seats), PEEK (w/ PEEK seats), UHMWPE (w/ UHMWPE seats) 29 Bonnet Stud STM 193 GR. B8, B8C, B8T or B8M, Monel 30 Bonnet Stud Nut STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 31 Disc Springs Inconel 70 Top Grounding Spring Stainless Steel 71 Bottom Grounding Spring Inconel 72 Retaining Ring Stainless Steel Note 1: Compression plate and body seal are Monel for valves with Monel or Hastelloy C trim. Note 2: 17-4PH stems are required with PEEK seats. 8 TECHNICL BULLETIN 9/17
9 FLNGED BLL VLVES SME CLSS 150 & B7-1 EN DIMENSIONS 8 (DN 0) Series 7150 SME Class 150 L M Bolt Circle R Fire-Tite Non Fire-Tite S H F 71 C Typ. E Port 1 T Typ B 32 D = Bolt Circle N = Size of holes P = Number of holes Valve Size inches Series 7150 Emission-Pak SME Class 150 pproximate Dimensions - inches B C D E F H L M N P R S T ISO Pattern M F Valve Size DN Series 7150 Emission-Pak SME Class 150 pproximate Dimensions - mm B C D E F H L M N P R S T ISO Pattern M F lb kg TECHNICL BULLETIN 9/17 9
10 B7-1 EN METSO Part No. 1 Body 2 Body Cap Part Name BILLS OF MTERILS ND PRTS LIST Fire- Tite 8 (DN 0) Standard Port Series 7150 Valves Body Material Carbon Steel (22) Carbon Steel STM 216 Carbon Steel STM Stainless Steel (36) 316 Stainless Steel STM 316 Stainless Steel STM lloy (35) 3 Ball 316 Stainless Steel, Monel, Hastelloy C lloy 4 Stem 316 Stainless Steel, Monel, Hastelloy C lloy 5 Seat PTFE, Xtreme, PF Spiral Wound 6 Body Seal Spiral Wound Graphite/316 Stainless Steel Graphite/lloy Monel (71) Spiral Wound Graphite/Monel 7 Secondary Stem Seal Graphite 8 Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PF seats) 13 Thrust Bearing PTFE, Filled PTFE Compression Plate 316 Stainless Steel Monel 22 Identification Tag Stainless Steel 23 Pop Rivet Stainless Steel 29 Bonnet Stud STM 193 GR. B8, B8C, B8T or B8M, Monel 30 Bonnet Stud Nut STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 31 Disc Springs Inconel 32 Body Stud STM 193 GR. B8, B8C, B8T or B8M, Monel 33 Body Stud Nut STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 70 Top Grounding Spring Stainless Steel 71 Bottom Grounding Spring Inconel 72 Retaining Ring Stainless Steel Part No. 1 Body 2 Body Cap Part Name BILLS OF MTERILS ND PRTS LIST Non Fire- Tite 8 (DN 0) Standard Port Series 7150 Valves Body Material Carbon Steel (22) Carbon Steel STM 216 Carbon Steel STM Stainless Steel (36) 316 Stainless Steel STM 316 Stainless Steel STM lloy (35) 3 Ball 316 Stainless Steel, Monel, Hastelloy C lloy 4 Stem 316 Stainless Steel, Monel, Hastelloy C lloy 5 Seat PTFE, Xtreme, PF 6 Body Seal Spiral Wound PTFE/316 Stainless Steel Spiral Wound PTFE/ lloy Spiral Wound PTFE/ Monel Monel (71) 8 Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PF seats) 13 Thrust Bearing PTFE, Filled PTFE Compression Plate 316 Stainless Steel Monel 22 Identification Tag Stainless Steel 23 Pop Rivet Stainless Steel 29 Bonnet Stud STM 193 GR. B8, B8C, B8T or B8M, Monel 30 Bonnet Stud Nut STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 31 Disc Springs Inconel 32 Body Stud STM 193 GR. B8, B8C, B8T or B8M, Monel 33 Body Stud Nut STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 70 Top Grounding Spring Stainless Steel 71 Bottom Grounding Spring Inconel 72 Retaining Ring Stainless Steel TECHNICL BULLETIN 9/17
11 FLNGED BLL VLVES SME CLSS 150 & B7-1 EN DIMENSIONS (DN 250) Series 7150 SME Class 150 and 8 & (DN 0 & 250) Series 7 & 730S SME Class (Trunnion & Non-Trunnion) U V W 8 S 13 23, 19 ØN R CapStyle for 8" (DN0) 730S "(DN 250) 7150 & "(DN 250) 730S G K ØC Typ. ØE Port (12.7) TTyp. B Ball ProtrusionFor " (DN250) &" (DN 250) 730S 1 D=Bolt Circle L=Size of Holes M=Number of holes inches Series 7150 SME Class 150 pproximate Dimensions inches B C D E G K L** M N R S T U V W X N/ 465 DN Series 7150 SME Class 150 pproximate Dimensions mm B C D E G K L** M N R S T U V W* X N/ 211 lb kg inches 7 730S 7 B 730S B Series 7 & 730S SME Class pproximate Dimensions inches lb C D E G K L** M N R S T U V W X 7 730S N/ N/ DN 7 730S 7 B Series 7 & 730S SME Class pproximate Dimensions mm kg 730S C D E G K L** M N R S T U V W* X 7 730S B N/ N/ * Screw-thread dimensions are in inches. ** Holes in the body cap are threaded: 8 (DN 0) 730S (7/8-9 x 1.25 deep), (DN 250) 7150 (7/8-9 x 1.13 deep), (DN 250) 730S (1-8 x 1.38 deep) 1 The ball only protrudes from the flange face (in the closed position) on the (DN 250) 7150 and (DN 250) 730S. This is because they have the same F-F dimension and the same ball. Each of these also has the special insert with tapped pipe flange bolt holes. TECHNICL BULLETIN 9/17 11
12 B7-1 EN METSO Part No. Part Name BILLS OF MTERILS ND PRTS LIST (DN 250) Series 7150, 8 & (DN 0 & 250) Series 7 & 730S Carbon Steel (22) ll Series Body Material 316 Stainless Steel (36) ll Series 1 Body Carbon steel STM 216 Gr WCB 316 Stainless steel STM 351 Gr CF8M 2 Body Cap Carbon steel STM 216 Gr WCB 316 Stainless steel STM 351 Gr CF8M 3 Ball 316 Stainless steel, lloy, Monel 1, Hastelloy C 1 - as 5 Stem 316 Stainless steel, Monel 1, Hastelloy C 1, 17-4 PH - as 7 Seat Xtreme, PTFE - as 8 Stem Retainer Carbon steel STM 216 Gr WCB Stainless steel STM 351 Gr CF8M 9 Gland Follower Carbon Steel, Stainless steel, Monel 1 Compression Plate 1 Stainless steel, Monel 1 12 Body Stud STM 193 Gr B7; Gr B7M; Gr B8, B8C, B8T or B8M 13 Stem Retainer Bolt STM 193 Gr B7; Gr B7M; Gr B8, B8C, B8T or B8M 14 Stud STM 193 Gr B7; Gr B7M; Gr B8, B8C, B8T or B8M 16 Nut STM 194 Gr 2H; Gr2HM; Gr 8B, 8CB, 8MB, 8TB, 8FB 18 Nut STM 194 Gr 2H; Gr 2HM; Gr 8B, 8CB, 8MB, 8TB, 8FB 19 Identification Tag Stainless steel 23 Rivet Stainless steel 65 Body Gasket 1 Spiral Wound PTFE / 316 Stainless steel 1 66 Stem Retainer Seal 1 Spiral Wound PTFE / 316 Stainless steel 1 69 Packing PTFE, molecularly enhanced PTFE (Xtreme-seated valves) 70 Stem Bearing Filled PTFE 71 Secondary Stem Seal Graphite 89 Trunnion 2 Carbon Steel Stainless steel 91 Bearing Spacer 2 Filled PTFE 92 Trunnion Bearing Stainless steel Note 1: Compression plate, body gasket, stem retainer gasket, and gland follower are Monel for valves with Monel or Hastelloy C trim. Note 2: Parts 89, 91 and 92 are removed from values without trunnions. 12 TECHNICL BULLETIN 9/17
13 FLNGED BLL VLVES SME CLSS 150 & B7-1 EN DIMENSIONS 12 (DN 500) Series 7150 SME Class 150 and Series 7 SME Class and 12 (DN ) Series 730S SME Class (Trunnion) U U V W V W 16" " (DN ) Type P 14" 16" (DN ) Type " (DN ) Type 730S øn Bonnet 12" (DN ) Type 730S 18" " (DN ) Type " & 14" (DN & 250) Type 7 22, 37, 23, G R K øc Typ. Q øe Port 1 T Typ. 3 B 5 11 D = Bolt Circle L = Size of Holes M = Number of Holes inches Series 7150 SME Class 150 pproximate Dimensions - inches B C D E G K L** M N P Q R T U V W / / / / / DN Series 7150 SME Class 150 pproximate Dimensions - mm B C D E G K L** M N P Q R T U V W* / * / * / / / lb kg * Screw-thread dimensions are in inches ** Holes in the body cap are threaded: 12 (DN ) 730S (1-8 x 1.44 deep), 14 (DN 350) 7150 (1-8 x 1.31 deep), 16 (DN 400) 7150 (1-1/8-8 x 1.69 deep) TECHNICL BULLETIN 9/17 13
14 B7-1 EN METSO Valve Size inches 730S 7 730S B Series 730S & 7 SME Class pproximate Dimensions inches 7 B lb C D E G K L** M N P Q R T U V W 730S / / / / / /4-0 Valve Size DN 730S 7 730S B Series 730S & 7 SME Class pproximate Dimensions mm 7 B kg C D E G K L** M N P Q R T U V W* 730S / / / / / / * Screw-thread dimensions are in inches. ** Holes in the body cap are threaded: 12 (DN ) 730S (1-8 x 1.44 deep), 14 (DN 350) 7150 (1-8 x 1.31 deep), 16 (DN 400) 7150 (1-1/8-8 x 1.69 deep). 18-inch (DN 450) valve is designated 73LO. Part No. BILLS OF MTERILS ND PRTS LIST 12 (DN 500) Series 7150, 12 (DN 500) Series 7, 18 (DN 450) Series 73LO, and 12 (DN ) Series 730S (Trunnion) Body Material Part Name Carbon Steel (22) ll Series 316 Stainless Steel (36) ll Series 1 Body Carbon steel STM Stainless steel STM 2 Body Cap Carbon steel STM Stainless steel - STM 3 Ball 316 Stainless steel, lloy, Monel 1, Hastelloy C 1 - as 4 Stem lloy, 316 Stainless steel, 17-4PH Stainless steel, Monel 1, Hastelloy C 1 - as 5 Seat PTFE, filled PTFE, - as 6 Body Seal Spiral-wound PTFE/316 Stainless steel 1 7 Secondary Stem Seal Graphite 8 Stem Bearing Filled PTFE Body Stud STM 193 Gr. B7; Gr. B7M; Gr. B8, B8C, B8T or B8M 11 Nut STM 194 Gr. 2H, 2HB, or Gr. 2HM; Gr. 8B, 8CB, 8MB, or 8TB 14 Bonnet Studs STM 193 Gr. B7; Gr. B7M; Gr. B8, B8C, B8T or B8M 18 Bonnet Stud Nut STM 194 Gr. 2H, 2HB, or Gr. 2HM; Gr. 8B, 8CB, 8MB, or 8TB Compression Plate Carbon steel Stainless steel, Monel 2 21 Compression Ring Stainless steel 22 Identification Tag Stainless steel 23 Drive Screw Stainless steel 25 Stem Retainer Seal Graphite 26 Trunnion Plate Carbon steel, 316 Stainless steel 1, Type CF8M 27 Trunnion Bearing 316 Stainless-steel-backed glass-filled PTFE 28 Bearing Spacer Filled PTFE 29 Hex. Hd. Cap Screw Carbon steel STM 193 Gr. B7 or B7M 30 Stem Retainer Carbon steel 316 Stainless steel type CF8M 32 Upper Stem Seal PTFE 33 Key Carbon steel 34 Sc. Hd. Cap Screw 3 STM 193 Gr. B7; Gr. B7M; Gr. B8, B8C, or B8T 35 Trunnion Ring Carbon steel Stainless steel 36 Tag: Trunnion Ball Stainless steel 37 Caution Tag 4 Stainless steel Note 1: When trim is lloy or Monel, body seal is PTFE Monel, when trim is Hastelloy C, seal is PTFE Hastelloy C. Note 2: When trim is lloy, Monel, or Hastelloy C, compression plate is Monel. Note 3: For 14 & 16 (DN 350 & 400) 7150 and 12 (DN ) 730S only. Note 4: For 12, 14, & 16 (DN, 350, & 400) 7150 and 12 (DN ) 730S& 7 only. 14 TECHNICL BULLETIN 9/17
15 FLNGED BLL VLVES SME CLSS 150 & B7-1 EN VLVE TORQUE DT Use these torque charts as a guide for actuator selection. dditional requirements may be imposed by media characteristics, trim, and frequency of valve operation. For clean lubricating fluid service, required torque for PTFE (T), Xtreme (X) and filled PTFE (M) seated valves only may be reduced % when the valve is equipped with corrosion resistant trim. For difficult services such as slurries and semi-solids, and for oxygen, increase values by 50%. If in doubt, err on the side of safety by using a larger actuator than would normally be selected. Torque output values and actuator selection tables for the different types of Jamesbury actuators are contained in the bulletins listed below. Manual Gear ctuators 0-1 B-Series Piston ctuators 6B Quadra-Powr X Spring Diaphragm Rotary ctuators 1-4 Valv-Powr Series VPVL VPVL Stainless Steel V-Series Electric ctuators 0-1 DC Electric ctuators 1-1 LC Series Electric ctuators 2-1 & 3-1 ESR-Series Electric ctuators 4-1 Q6-Series Electric ctuators 5-1 QX-Series Electric ctuators 7-1 Recommended ctuator Torque, FT LBS,000, PTFE (T) Seated Valves Maximum Differential Pressure, bar (DN 250) Non-Trunnion 8 (DN 0) Non-Trunnion SME Class 150 and Valve Torque Data (DN 500) 18 (DN 450) 16 (DN 400) (DN -350) (DN 250) 8 (DN 0) 6 (DN 150) 4 (DN 0) 3 (DN 80) 2 (DN 50) 1-1/2 (DN 40) 1 (DN 25) 3/4 (DN ) 1/2 (DN 15), Recommended ctuator Torque, N m Recommended ctuator Torque, FT LBS Xtreme (X) and TFM (Z) Seated Valves 1/2 (DN ) Maximum Differential Pressure, bar ( DN 250) Non-Trunnion 8 (DN 0) Non-Trunnion (DN 250) 8 ( DN 0) 6 (DN 150) 4 (DN 0) 3 (DN 80) 2 (DN 50) 1-1/2 (DN 40) 1 (DN 25) 3/4 (DN ) 1/2 (DN 15) Recommended ctuator Torque, N m Maximum Differential Pressure, psi Maximum Differential Pressure, psi Note: See note on page 16. TECHNICL BULLETIN 9/17 15
16 B7-1 EN METSO Recommended ctuator Torque, FT LBS Recommended ctuator Torque, FT LBS PEEK (L) Seated Valves 1/2 6 (DN ) Maximum Differential Pressure, bar See Note 1 6 (DN 150) 4 (DN 0) 3 (DN 80) 2 (DN 50) 1-1/2 (DN 40) 1 (DN 25) PF (B) Seated Valves 1/2 8 (DN 15 0) Maximum Differential Pressure, bar VLVE TORQUE DT SME Class 150 and Valves /4 (DN ) 8 1/2 (DN 15) Maximum Differential Pressure, psi See Note 1 4 (DN 0) 3 (DN 80) 2 (DN 50) See Note 2 1-1/2 (DN 40) 8 (DN 0) 6 (DN 150) See Note 3 1 (DN 25) 8 3/4 (DN ) /2 (DN 15) Maximum Differential Pressure, psi Recommended ctuator Torque, N m Recommended ctuator Torque, N m Recommended ctuator Torque, FT LBS, UHMW Polyethylene (U) Seated Valves Maximum Differential Pressure, bar (DN 250) Non-Trunnion 8 (DN 0) Non-Trunnion (DN 500) 18 (DN 450) 16 (DN 400) (DN -350) (DN 250) 8 (DN 0) 6 (DN 150) 4 (DN 0) 3 (DN 80) 2 (DN 50) 1-1/2 (DN 40) 1 (DN 25) 3/4 (DN ) 8 1/2 (DN 15) Maximum Differential Pressure, psi Note 1: ctuator is required. Note 2: ctuator is required for difficult service. Note 3: ctuator is required for difficult service and pressure greater than 500 psi. Note 4: Dashed line indicates Non-Trunnion and is rated to Class 150 only for seats., Recommended ctuator Torque, N m 16 TECHNICL BULLETIN 9/17
17 FLNGED BLL VLVES SME CLSS 150 & B7-1 EN EMISSION-PK SERIES 7000 BLL VLVES The Emission-Pak provides additional protection from emissions and stem seal leakage, and the ability to monitor leakage for critical applications. The Emission-Pak is an extended stem retainer containing two sets of stem seals which is mounted in the valve body. special TFM and graphite gasket maintains a leak-fee joint and assures that a Fire-Tite valve retains its fire tested rating. VILBLE CONFIGURTIONS Standard Bore Valves Range NSI Class 7150, /2 8 (DN 15 0) S 1/2 6 (DN ) 7, /2 6 (DN ) FETURES Two separate live loaded v-ring stem seals One piece stem Two thrust bearings Optional stem seal monitoring port permits detection of primary stem seal wear or leakage ISO Class H rated 1/2-2 (DN15-50) Series 7000 with Emission-Pak Lockable Handle as Standard Bonnet accepts standard handle kit, accessories and actuators Double packed and live loaded stem seals provide consistent packing force, resists thermal and pressure transients and extends valve life TFM / graphite body seal and gasket provides superior bonnet to stem retainer interface and sealing performance to PI-607 and ISO Optional monitoring port that allows padding of the lantern area or instrumentation to detect migrating liquids or gases. Qualification Test Emission-Pak 1/2 2 (DN 15 50) 7000 series are qualified to ISO H-CC3-SS1-T0. TECHNICL BULLETIN 9/17 17
18 B7-1 EN METSO DIMENSIONS 1/2 2 (DN 15 50) Series 7150 SME Class 150 and Series 7 & 730S SME Class with Emission-Pak W V S U 4 N H J K G R FIRE-TITE 5 6 E ND HEX SIZE 22 C NON FIRE-TITE L - THRU BOTH ENDS M - NO. OF HOLES B T D BOLT CIRCLE TYP. BOTH ENDS Series 7150 Emission-Pak SME ll pproximate Dimensions - inches ISO inches B C D E G H J K L M N R S T U V W Bonnet 1/ M5 F03 3/ M5 F M5 F04 1-1/ M6 F M6 F05 Series 7150 Emission-Pak SME ll pproximate Dimensions - mm ISO DN B C D E G H J K L M N R S T U V W Bonnet M5 F M5 F M5 F M6 F M6 F05 inches Series 7 & 730S Emission-Pak SME ll pproximate Dimensions - inches ISO Bonnet 730S 7 B C D E G H J K L M N R S T U V W 1/ M5 F03 3/ M5 F M5 F04 1-1/ M6 F M6 F05 DN Series 7 & 730S Emission-Pak SME ll pproximate Dimensions - mm ISO Bonnet 730S 7 B C D E G H J K L M N R S T U V W M5 F M5 F M5 F M6 F M6 F05 18 TECHNICL BULLETIN 9/17
19 FLNGED BLL VLVES SME CLSS 150 & B7-1 EN Part No. 1 Body 2 Insert Part Name BILLS OF MTERILS ND PRTS LIST Fire- Tite 1/2 2 (DN 15 50) Standard Port Series 7000 Valves with Emission-Pak Body Material Carbon Steel (22) Carbon Steel STM 216 Carbon Steel STM Stainless Steel (36) 316 Stainless Steel STM 316 Stainless Steel STM lloy (35) 3 Ball 316 Stainless Steel, Monel, Hastelloy C lloy 4 Stem 316 Stainless Steel, Monel, Hastelloy C lloy Monel (71) 5 Seat PTFE, Xtreme, PF 6 Body Seal TFM 7 Secondary Stem Seal Graphite 13 Stem Bearing PTFE, Filled PTFE 16 Hex Nut Carbon Steel (zinc plated) 17 Handle Carbon Steel (zinc plated) Series Stainless Steel 19 Lock Washer Carbon Steel (zinc plated) Series Stainless Steel 22 Identification Tag Stainless Steel 23 Pop Rivet Stainless Steel Compression Plate 316 Stainless Steel Series Stainless Steel 25 Socket Cap Screw Stainless Steel Monel 26 Handle Stop Screw Stainless Steel 29 Hex Cap Screw Stainless Steel (Monel if Chlorine or NCE) Monel 31 Disc Springs Inconel 1 Emission-Pak Housing Carbon Steel STM Stainless Steel STM 2 Hex Head Cap Screw STM 193 GR. B7, STM 193 GR. B8, B8C, B8T or B8M, Monel 3 Lantern Ring 316 Stainless Steel, Monel, lloy 4 Double Stem Seals TFM 5 Emission-Pak Body Seal TFM 6 Emission-Pak Body Gasket Graphite 7 Pipe Plug Plastic 9 Bearing Strip PTFE 112 Warning Tag Polyethylene TECHNICL BULLETIN 9/17 19
20 B7-1 EN METSO BILLS OF MTERILS ND PRTS LIST Non Fire- Tite 1/2 2 ( DN 15 50) Standard Port Series 7000 Valves with Emission- Pak Body Material Part No. Part Name Carbon Steel (22) 316 Stainless Steel (36) lloy (35) Monel (71) 1 Body Carbon Steel STM Stainless Steel STM Type CN7M 2 Insert Carbon Steel STM Stainless Steel STM Type CN7M 3 Ball 316 Stainless Steel, Monel, Hastelloy C lloy 4 Stem 316 Stainless Steel, Monel, Hastelloy C lloy 5 Seat PTFE, Xtreme, PF, PEEK 1 & UHMWPE 6 Body Seal TFM (w/ PTFE, Xtreme, PF seats), UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats) 8 Primary Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PF seats), UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats) Stem Guide PEEK (PEEK seated valves) 16 Hex Nut Carbon Steel (zinc plated) Series Stainless Steel 17 Handle Carbon Steel (zinc plated) Series Stainless Steel 19 Lock Washer Carbon Steel (zinc plated) Series Stainless Steel Compression Plate 316 Stainless Steel Monel 22 Identification Tag Stainless Steel 23 Pop Rivet Stainless Steel 24 Stem Bearing PTFE (w/ PTFE seats), Filled PTFE (w/ Xtreme & PF seats), PEEK (w/ PEEK seats), UHMWPE (w/ UHMWPE seats) 25 Socket Cap Screw Stainless Steel 26 Handle Stop Screw Stainless Steel 29 Hex Cap Screw Stainless Steel (Monel if Chlorine or NCE) Monel 31 Disc Springs Inconel 1 Emission-Pak Carbon Steel STM Stainless Steel STM Type Housing CN7M 2 Hex Head Cap Screw STM 193 GR. B7, STM 193 GR. B8, B8C, B8T or B8M, Monel 3 Lantern Ring 316 Stainless Steel, Monel, lloy 4 Double Stem Seals TFM (w/ Xtreme, PTFE & PF seats), UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats) 5 Emission-Pak Body Seal TFM, UHMWPE (w/ UHMWPE seats) 6 Emission-Pak Body Gasket Graphite 7 Pipe Plug Plastic 9 Bearing Strip PTFE 112 Warning Tag Polyethylene Note 1: 17-4 PH stems required with PEEK seats TECHNICL BULLETIN 9/17
21 FLNGED BLL VLVES SME CLSS 150 & B7-1 EN 3-8 (DN 80-0) Series 7150 valves with Emission-Pak 3-6 (DN ) Series 7 & 730S valves with Emission-Pak Lockable Handle as Standard Bonnet accepts standard handle kit, accessories and actuators Double packed and live loaded stem seals provide consistent packing force, resists thermal and pressure transients and extends valve life Optional monitoring port that allows padding of the lantern area or instrumentation to detect migrating liquids of gases TFM / graphite body seal and gasket provides superior bonnet to stem retainer interface and sealing performance to PI-607 and ISO Qualification Test 3 8 (DN 80 0) 7150, 3-6 (DN ) 7 and 730S, series with Emission-Pak are qualified to ISO H CO3-SS3 T(0 C). TECHNICL BULLETIN 9/17 21
22 B7-1 EN METSO DIMENSIONS 3 6 (DN ) Series 7150, 730S and 7 with Emission-Pak L M Bolt Circle R Fire-Tite Non Fire-Tite H 1/8 NPT When Equipped S F 2 C Typ. E Port 71 1 T Typ B D = Bolt Circle N = Size of holes P = Number of holes Series 7150 Emission-Pak SME Class 150 pproximate Dimensions - inches ISO inches B C D E F H L M N P R S T Pattern lb M F M F M F 140 Series 7150 Emission-Pak SME Class 150 pproximate Dimensions - mm ISO DN B C D E F H L M N P R S T Pattern kg M F M F M F 64 Series 7 & 730S Emission-Pak SME Class pproximate Dimensions - inches 7 ISO 7 730S B C D E F H L M N P R S T Pattern lb M F M F M F inches DN Series 7 & 730S Emission-Pak SME Class pproximate Dimensions - mm ISO Pattern 7 kg 730S lb 7 730S B C D E F H L M N P R S T M F M F M F S kg 22 TECHNICL BULLETIN 9/17
23 FLNGED BLL VLVES SME CLSS 150 & B7-1 EN Part No. 1 Body 2 Insert Part Name BILLS OF MTERILS ND PRTS LIST Fire- Tite 3 6 (DN ) Standard Port Series 7000 Valves with Emission- Pak Body Material Carbon Steel (22) Carbon Steel STM 216 Carbon Steel STM Stainless Steel (36) 316 Stainless Steel STM 316 Stainless Steel STM lloy (35) 3 Ball 316 Stainless Steel, Monel, Hastelloy C lloy 4 Stem 316 Stainless Steel, Monel, Hastelloy C lloy Monel (71) 5 Seat PTFE, Xtreme, PF 6 Body Seal TFM 7 Secondary Stem Seal Graphite 13 Thrust Bearing PTFE, Filled PTFE Compression Plate 316 Stainless Steel Monel 22 Identification Tag Stainless Steel 23 Pop Rivet Stainless Steel 29 Bonnet Stud STM 193 GR. B8, B8C, B8T or B8M, Monel 30 Bonnet Stud Nut STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 31 Disc Springs Inconel 70 Top Grounding Spring Stainless Steel 71 Bottom Grounding Spring Inconel 72 Retaining Ring Stainless Steel 1 Emission-Pak Stem Retainer Carbon Steel STM Stainless Steel STM 2 Stud STM 193 GR. B7, STM 193 GR. B8, B8C, B8T or B8M, Monel 3 Spacer/Lantern Ring 316 Stainless Steel, Monel, lloy 4 Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PF seats) 5 Inner Stem Retainer Seal TFM 6 Outer Stem Retainer Seal Graphite 7 Pipe Plug Plastic 9 Bearing Strip PTFE 1 Compression Ring 316 Stainless Steel, Monel 111 Hex Nut STM 194 GR. 2H, STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 112 Warning Tag Polyethylene TECHNICL BULLETIN 9/17 23
24 B7-1 EN METSO Part No. 1 Body 2 Insert Part Name BILLS OF MTERILS ND PRTS LIST Non Fire- Tite 3 6 ( DN ) Standard Port Series 7000 Valves with Emission- Pak Carbon Steel (22) Carbon Steel STM 216 Carbon Steel STM Stainless Steel (36 ) Body Material 316 Stainless Steel STM 316 Stainless Steel STM lloy (35) 3 Ball 316 Stainless Steel, Monel, Hastelloy C lloy 4 Stem 316 Stainless Steel, Monel, Hastelloy C lloy Monel (71) 5 Seat PTFE, Xtreme, PF, PEEK 1 & UHMWPE 6 Body Seal TFM (w/ PTFE, Xtreme, PF seats), UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats) 7 Secondary Stem Seal Graphite 13 Thrust Bearing PTFE, Filled PTFE Compression Plate 316 Stainless Steel Monel 22 Identification Tag Stainless Steel 23 Pop Rivet Stainless Steel 24 Thrust Bearing PTFE (w/ PTFE seats), Filled PTFE (w/ Xtreme & PF seats), PEEK (w/ PEEK seats), UHMWPE (w/ UHMWPE seats) 29 Bonnet Stud STM 193 GR. B8, B8C, B8T or B8M, Monel 30 Bonnet Stud Nut STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 31 Disc Springs Inconel 70 Top Grounding Spring Stainless Steel 71 Bottom Grounding Spring Inconel 72 Retaining Ring Stainless Steel 1 Emission-Pak Stem Retainer Carbon Steel STM Stainless Steel STM 2 Stud STM 193 GR. B7, STM 193 GR. B8, B8C, B8T or B8M, Monel 3 Spacer/Lantern Ring 316 Stainless Steel, Monel, lloy 4 Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PF seats), UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats) 5 Inner Stem Retainer Seal TFM, PF (w/ PF Seats), UHMWPE (w/ UHMWPE seats) 6 Outer Stem Retainer Seal Graphite 7 Pipe Plug Plastic 9 Bearing Strip PTFE 1 Compression Ring 316 Stainless Steel, Monel 111 Hex Nut STM 194 GR. 2H, STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 112 Warning Tag Polyethylene Note 1: 17-4PH stem are required with PEEK seats 24 TECHNICL BULLETIN 9/17
25 FLNGED BLL VLVES SME CLSS 150 & B7-1 EN DIMENSIONS 8 (DN 0) Series 7150 SME Class 150 with Emission-Pak (Non-Trunnion) L M Bolt Circle R Fire-Tite Non Fire-Tite H 1/8 NPT When Equipped S F 71 C Typ. E Port 1 T Typ B D = Bolt Circle N = Size of Holes P = Number of holes inches Series 7150 Emission-Pak SME Class 150 pproximate Dimensions - inches B C D E F H L M N P R S T ISO Pattern M F lb DN Series 7150 Emission-Pak SME Class 150 pproximate Dimensions - mm B C D E F H L M N P R S T ISO Pattern M F kg TECHNICL BULLETIN 9/17 25
26 B7-1 EN METSO Part No. 1 Body 2 Body Cap Part Name BILLS OF MTERILS ND PRTS LIST Fire- Tite 8 ( DN 0) Standard Port Series 7150 Valves with Emission- Pak Carbon Steel (22) Carbon Steel STM 216 Carbon Steel STM Stainless Steel (36) Body Material 316 Stainless Steel STM 316 Stainless Steel STM lloy (35) 3 Ball 316 Stainless Steel, Monel, Hastelloy C lloy 4 Stem 316 Stainless Steel, Monel, Hastelloy C lloy 5 Seat PTFE, Xtreme, PF Spiral Wound Graphite/ 6 Body Seal Spiral Wound Graphite/316 Stainless Steel lloy Monel (71) Spiral Wound Graphite/ Monel 7 Secondary Stem Seal Graphite 13 Thrust Bearing PTFE, Filled PTFE Compression Plate 316 Stainless Steel Monel 22 Identification Tag Stainless Steel 23 Pop Rivet Stainless Steel 29 Bonnet Stud STM 193 GR. B8, B8C, B8T or B8M, Monel 30 Bonnet Stud Nut STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 31 Disc Springs Inconel 32 Body Stud STM 193 GR. B8, B8C, B8T or B8M, Monel 33 Body Stud Nut STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 70 Top Grounding Spring Stainless Steel 71 Bottom Grounding Spring Inconel 72 Retaining Ring Stainless Steel 1 Emission-Pak Stem Retainer Carbon Steel STM Stainless Steel STM 2 Stud STM 193 GR. B7, STM 193 GR. B8, B8C, B8T or B8M, Monel 3 Spacer/Lantern Ring 316 Stainless Steel, Monel, lloy 4 Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PF seats) 5 Inner Stem Retainer Seal TFM 6 Outer Stem Retainer Seal Graphite 7 Pipe Plug Plastic 9 Bearing Strip PTFE 1 Compression Ring 316 Stainless Steel, Monel 111 Hex Nut STM 194 GR. 2H, STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 112 Warning Tag Polyethylene 26 TECHNICL BULLETIN 9/17
27 FLNGED BLL VLVES SME CLSS 150 & B7-1 EN Part No. 1 Body 2 Body Cap Part Name BILLS OF MTERILS ND PRTS LIST Non Fire- Tite 8 ( DN 0) Standard Port Series 7150 Valves with Emission- Pak Body Material Carbon Steel (22) Carbon Steel STM 216 Carbon Steel STM Stainless Steel (36) 316 Stainless Steel STM 316 Stainless Steel STM lloy (35) 3 Ball 316 Stainless Steel, Monel, Hastelloy C lloy 4 Stem 316 Stainless Steel, Monel, Hastelloy C lloy 5 Seat PTFE, Xtreme, PF Spiral Wound PTFE/ 6 Body Seal Spiral Wound PTFE/316 Stainless Steel lloy Monel (71) Spiral Wound PTFE/ Monel 8 Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PF seats) 13 Thrust Bearing PTFE, Filled PTFE Compression Plate 316 Stainless Steel Monel 22 Identification Tag Stainless Steel 23 Pop Rivet Stainless Steel 29 Bonnet Stud STM 193 GR. B8, B8C, B8T or B8M, Monel 30 Bonnet Stud Nut STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 31 Disc Springs Inconel 32 Body Stud STM 193 GR. B8, B8C, B8T or B8M, Monel 33 Body Stud Nut STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 70 Top Grounding Spring Stainless Steel 71 Bottom Grounding Spring Inconel 72 Retaining Ring Stainless Steel 1 Emission-Pak Stem Retainer Carbon Steel STM Stainless Steel STM 2 Stud STM 193 GR. B7, STM 193 GR. B8, B8C, B8T or B8M, Monel 3 Spacer/Lantern Ring 316 Stainless Steel, Monel, lloy 4 Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PF seats), UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats) 5 Inner Stem Retainer Seal TFM, PF (w/ PF Seats), UHMWPE (w/ UHMWPE seats) 6 Outer Stem Retainer Seal Graphite 7 Pipe Plug Plastic 9 Bearing Strip PTFE 1 Compression Ring 316 Stainless Steel, Monel 111 Hex Nut STM 194 GR. 2H, STM 194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel 112 Warning Tag Polyethylene TECHNICL BULLETIN 9/17 27
28 B7-1 EN METSO Use these torque charts as a guide for actuator selection. dditional requirements may be imposed by media characteristics, trim, and frequency of valve operation. For clean lubricating fluid service, required torque for PTFE (T) and Xtreme (X) seated valves only may be reduced % when the valve is equipped with corrosion resistant trim. For difficult services such as slurries and semi-solids, and for oxygen, increase values by 50%. If in doubt, err on the side of safety by using a larger actuator than would normally be selected. Torque output values and actuator selection tables for the different types of Jamesbury actuators are contained in the bulletins listed below. EMISSION-PK VLVE TORQUE DT Manual Gear ctuators 0-1 B-Series Piston ctuators 6B Quadra-Powr X Spring Diaphragm Rotary ctuators 1-4 Valv-Powr Series VPVL VPVL Stainless Steel V-Series Electric ctuators 0-1 DC-Series Electric ctuators 1-1 LC Series Electric ctuators 2-1 & 3-1 ESR-Series Electric ctuators 4-1 Q6-Series Electric ctuators 5-1 QX-Series Electric ctuators 7-1 PTFE (T) Seated Valves NSI Class 150 and Valve Torque Data Xtreme (X) and TFM (Z) Seated Valves Maximum Differential Pressure, bar Maximum Differential Pressure, bar Recommended ctuator Torque, FT LBS (DN 150) 4 (DN 0) 3 (DN 80) SB 2 (DN 50) 1-1/2 (DN 40) SB 1 (DN 25) SB, 3/4 (DN ) 1/2 (DN 15) Recommended ctuator Torque, N m Recommended ctuator Torque, FT LBS (DN 150) 4 (DN 0) 3 (DN 80) SB 2 (DN 50) 1-1/2 (DN 40) 1 (DN 25) 3/4 (DN ) 1/2 (DN 15) Recommended ctuator Torque, N m Maximum Differential Pressure, psi Maximum Differential Pressure, psi 28 TECHNICL BULLETIN 9/17
EMISSION-PAK SERIES 7000 AND 9000 BALL VALVES
EMISSION-PAK SERIES 7000 AND 9000 BALL VALVES The Emission-Pak provides a simple and economical method to meet emissions standards. It is supplied as a factory mounted valve assembly. The Emission-Pak
More informationjamesbury Bulletin B100-1 Issue 12/2003
/" " (DN 8 0) STYLE A MODEL D THREADED END 00 CWP BALL VALVE The A-Style ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve. This ball valve's
More information1/4" 2" (DN 8 50) A-STYLE MODEL D THREADED END 2000 CWP BALL VALVE
/" " (DN 8 ) A-STYLE MODEL D THREADED END 000 CWP BALL VALVE The A-Style ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve. This ball valve's
More information1/4 2 (DN 8 50) ELIMINATOR 2000 CWP AND ASME CLASS 600 THREADED END BALL VALVE
1/ (DN 8 ) ELIMINATOR 00 CWP AND ASME CLASS 600 THREADED END BALL VALVE The Eliminator ball valve offers our best technology and performance in a two-piece threaded end valve. This ball valve s unique
More information1/4" 2" (DN 8 50) ELIMINATOR 2000 CWP AND ANSI CLASS 600 THREADED END BALL VALVE
/" " (DN ) ELIMINATOR 00 CWP AND ANSI CLASS 600 THREADED END BALL VALVE The Eliminator ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve.
More informationjamesbury Bulletin B107-1EN Issue 1/2005
FLANGED BALL VALVES ANSI CLASS 1 & STANDARD BORE: 1/2 (DN 15 2) SERIES 7000 12 (DN ) AND LARGER SERIES 0 The Jamesbury polymeric-seated flanged ball valves feature a patented flexible-lip seat design that
More information1/4" 2" (DN 8 50) ELIMINATOR 2000 CWP AND ANSI CLASS 600 THREADED END BALL VALVE
/" " (DN 8 0) ELIMINATOR 00 CWP AND ANSI CLASS 00 THREADED END BALL VALVE The Eliminator ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve.
More informationDIN FLANGED BALL VALVES
DIN FLANGED BALL VALVES FULL BORE: DN 15 150 PN 16 PN 40 SERIES 9000 ( 916D, 940D) The Jamesbury polymeric-seated flanged ball valves feature a flexible-lip seat design that provides positive bi-directional
More informationFLANGED BALL VALVES ASME CLASS 150 & 300 STANDARD BORE:
FLANGED BALL VALVES ASME CLASS 150 & STANDARD BORE: 1/2" " (DN 15 ) SERIES 7000 The Jamesbury polymeric-seated flanged ball valves offer a patented flexible-lip seat design that provides positive bi-directional
More informationFLANGED BALL VALVES ASME CLASS 150 & 300 STANDARD BORE:
FLANGED BALL VALVES ASME CLASS 1 & STANDARD BORE: 1/2" " (DN 15 0) SERIES 7000 The Jamesbury polymeric-seated flanged ball valves offer a patented flexible-lip seat design that provides positive bi-directional
More informationFLANGED BALL VALVES ASME CLASS 150 & 300 FULL BORE:
FLANGED BALL VALVES ASME CLASS 1 & FULL BORE: 1/2" 24" (DN 15 600) SERIES 9000 The Jamesbury polymeric-seated flanged ball valves offer a patented flexible-lip seat design that provides positive bi-directional
More informationFLANGED BALL VALVES ANSI CLASS 150 & 300 FULL BORE:
FLANGED BALL VALVES ANSI CLASS 150 & FULL BORE: 1/2 12 (DN 15 ) SERIES 9000 14 24 (DN 350 600) AND LARGER SERIES 6000 The JAMESBURY polymeric-seated flanged ball valves offer a patented flexible-lip seat
More information1/4" 2" (DN 8 50) Clincher Series 2000 Threaded-End Ball Valves
/" " (DN 8 50) Clincher Series 000 Threaded-End Ball Valves Clincher Series 000 ball valves are rugged highperformance threaded-end ball valves designed to handle an extremely wide variety of liquids,
More informationEMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 1075
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 107 The JAMESBURY brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 107 are manual assemblies consisting of the JAMESBURY FIRE-TITE
More information1/4 2 (DN 8 50) CLINCHER SERIES 2000 THREADED-END BALL
/ (DN 8 50) CLINCER SERIES 00 TREDED-END BLL VLVES CLINCER Series 00 ball valves are rugged highperformance threaded-end ball valves designed to handle an extremely wide variety of liquids, gases, and
More information4" 9RET/REL FULL-PORT BOTTOM- OUTLET VALVES (AAR NO. E079011)
4" 9RET/REL FULL-PORT BOTTOM- OUTLET VLVES (R NO. E079011) DESCRIPTION The new 4" 9RET and 9REL flanged ball valves are reduced weight bottom-outlet valves and are available in a wide variety of materials
More informationEMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 1075
EMERGENCY SHUTOFF ND FIRESFE VLVES FIGURE 1075 The Jamesbury brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 1075 are manual assemblies consisting of the Jamesbury Fire-Tite
More informationSECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES DESCRIPTION STANDARD COMPLIANCE/CERTIFICATIONS S-2 ADVANTAGES S-3 PAGE SOFT SEAT EXPLODED VIEW S-4 FIRE SAFE SEAT EXPLODED VIEW S-5 METAL SEAT
More informationSECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS. Standard Compliance/Certifications S-2 Advantages S-3
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS DESCRIPTION Standard Compliance/Certifications S-2 Advantages S-3 PAGE Soft Seat Exploded View S-4 Fire Safe Seat Exploded
More informationJAMESBURY EASYFLOW JT SERIES ANGLE STEM TANK BOTTOM VALVES
JAMESBURY EASYFLOW JT SERIES ANGLE STEM TANK BOTTOM VALVES JT series angle stem tank bottom valves provide a compact assembly with additional space for actuator clearance on insulated vessels. Large port
More informationFEATURES. 3 position models can be equipped with special 180 operators offering two 90 steps.
2" 8" (DN 50 200) OTTOM PORTED 3-WY FLNGED LL VLVES Jamesbury bottom ported 3-way ball valves provide a variety of flow paths not commonly found in other 3-way designs.the basic design is suitable for
More informationSERIES 835 PROCESS-RATED CLASS 150 WAFER-SPHERE HIGH-PERFORMANCE BUTTERFLY VALVES
SERIES 835 PROCESS-RATED CLASS 150 WAFER-SPHERE HIGH-PERFORMANCE BUTTERFLY VALVES Series 835 process-rated ANSI Class 150 high-performance Wafer-Sphere butterfly valves are an excellent cost-effective
More informationTri-Pro Series. Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/ WOG 1-4
FLO TITEE valves & controls Tri-Pro Series Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/4 2250 WOG 1-4 TM Page 1 3pc High Performance Fire Safe Valves Models
More informationGATE VALVES ALV-1 FORGED STEEL NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS. ANSI Class PN /4-2 DN 8-50.
FORGED STEEL GTE VLVES LV-1 NOMINL PRESSURE NSI Class 150-1500 PN 16-250 NOMINL 1/4-2 DN 8-50 MTERILS Carbon Steel Low lloy Steel Stainless Steel CONNECTIONS Socket Weld Butt Weld Threaded Flanged XELVLVES
More informationNELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More informationW SERIES 3-PIECE BALL VALVES
W SERIES 3-PIECE BALL VALVES In-Line repairable metal seated ball valves for industrial and process applications. Design Pressure Rating 3000 WOG Available In Sizes ¼ to 3/4 2250 WOG Available In Sizes
More informationOne and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
More informationHigh Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6
More informationDOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES Table of Contents DESCRIPTION PAGE Standard Compliance... 2 Advantages... 3 Resilient Seat Exploded View... 4 Fire Safe Seat Exploded View... 5 CLASS 15
More informationSVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
More informationSHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
More informationSERIES 815 ANSI CLASS 150 AND SERIES 830 ASME CLASS 300 WAFER-SPHERE HIGH PERFORMANCE BUTTERFLY VALVES
SERIES 81 ANSI CLASS 10 AND SERIES 830 ASME CLASS 300 WAFER-SPHERE HIGH PERFORMANCE BUTTERFLY VALVES Jamesbury Wafer-Sphere high-performance butterfly valves provide long-lasting tight shutoff capability,
More informationSERIES 815 ANSI CLASS 150 AND SERIES 830 ANSI CLASS 300 WAFER-SPHERE HIGH PERFORMANCE BUTTERFLY VALVES
Distributed by: collinspipe.com SERIES 1 ANSI CLASS AND SERIES 30 ANSI CLASS 300 WAFER-SPHERE HIGH PERFORMANCE BUTTERFLY VALVES Jamesbury Wafer-Sphere high-performance butterfly valves provide long-lasting
More informationISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design
TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through
More informationEngineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
More informationTECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
More informationHSV SERIES 2-PIECE BALL VALVES
HSV SERIES 2-PIECE BALL VALVES Split Body metal seated ball valves for the Pulp and Paper and Power Industry. Design Pressure Rating 150# Available in Sizes 3 to 8 300# Available in Sizes 3 to 8 Valve
More information6D15 DIGESTER CAPPING VALVES
6D15 DIGESTER CPPING VLVES The JMESURY 6D15 digester capping valves provide automatic opening and closing of batch digesters for chip fill. y automating this operation, complete computer control of a batch
More informationNELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More informationGVI Series Industrial Globe Valves for Flow Control
Series Industrial Globe Valves for Flow Control 2-way Flow Control Globe Valves ssured utomations Series Industrial Globe Valves are contructed with rugged carbon steel or stainless steel bodies. They
More informationTriad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
More informationNELES TRUNNION MOUNTED BALL VALVE SERIES D
NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience
More informationGACHOT TYPE V16 BALL VALVES CARBON STEEL / FULL BORE / DN 8 TO DN 150
CRBON STEEL / FULL BORE / DN 8 TO DN 150 Carbon steel, forged body full bore ball valve designed to international and European standards FETURES PPLICTIONS Saturated steam. mmonia, natural gas, propane
More informationDesign A61D TriAx Triple Offset High Performance Butterfly Valve
pril 2000 ulletin 51.6:61D Trix Design 61D Trix Triple Offset High Performance utterfly Valve Description The Design 61D Trix is a triple offset disk HPV designed for rugged isolation service, available
More informationNELES RA SERIES V-PORT SEGMENT VALVE
NELES R SERIES V-PORT SEGMENT VLVE Metso's Neles V-port valve in the R-series is primarily intended as a control valve, but it can also be used for shut-off service. The R-series V-port segment valve is
More informationSpira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBUTTERFLY VALVE ST BUTTERFLY VALVE VALVES - 31
BUTTERFLY VALVE ST BUTTERFLY VALVE REVREV 6.2 6.2 / Nov. / Nov. 2017 2017 VALVES - 31 High Performance Butterfly Valve STHW STHL Size : 2 ~ 24 Type: Wafer, Lug Pressure Rating: Class 150, 300 Body Material:
More informationNELES R-SERIES SEGMENT VALVE WAFER R1 AND FLANGED R21
NELES R-SERIES SEGMENT VALVE WAFER R1 AND FLANGED R21 Neles R-Series rotary control valve is a segment ball valve that provides outstanding control performance in a quarter-turn valve design. It is offered
More informationBall Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
More informationjamesbury Bulletin W101-6EN Issue 7/2006
SERIES 1 ANSI CLASS 10 AND SERIES 30 ANSI CLASS 300 WAFER-SPHERE HIGH PERFORMANCE BUTTERFLY VALVES Jamesbury s Wafer-Sphere high-performance butterfly valves provide long-lasting tight shutoff capability,
More informationW. T. Maye, Inc. (WTMI) HPF52 (SW) REFINED BY DESIGN, DIFFERENT BY INTENT
W. T. Maye, Inc. (WTMI) 1-877-705-9864 info@wtmi-usa.com www.wtmi-usa.com FLO TITETM valves & controls Tri-Pro Series Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 psi 1/4-3/4
More informationSeries A angle pattern control valves
Series A angle pattern control valves AU: Angle pattern-unbalanced top guided AB: Angle pattern-balanced cage guided AM: Angle pattern-omega multi-path & multi-stage Metso's Neles A series angle pattern
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More informationKTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
More informationSeries 30,000 Rotary Process Valve. Technical data API 609, DIN 3840.
Series 30,000 Rotary Process Valve The outstanding performance of triple offset, metal seated Vanessa Series 30,000 valve is the ideal solution to achieve perfect shutoff in any process. Features Torque
More informationBall Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
More informationInstallation, Maintenance and Operating Instructions
Trunnion Flanged Ball Valves Series 7000 & 9000 8 12 (DN 200-300) 9150, 9180 Model A 6 8 (DN 150-200) 9300, 9380 Model B 10 (DN 250) 7150, 7180 Model A 10-12 (DN 250-300) 9300, 9380 Model A 8 10 (DN 200
More informationP95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
More informationSeries A angle pattern control valves
Series A angle pattern control valves AU: Angle pattern-unbalanced top guided AB: Angle pattern-balanced cage guided AM: Angle pattern-omega multi-path & multi-stage Metso's Neles A series angle pattern
More informationKEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL
KEYSTONE SERIES GR RESILIENT SETED BUTTERFLY VLVES GRW/GRL heavy duty industrial resilient seated butterfly valve GRW - Wafer body design GRL - Lugged body design FETURES GENERL PPLICTION Water, air, dry
More informationSpecifications. Body Materials: Carbon steel, stainless steel, chrome-moly steel, other castable alloys
CONTROL VLVES KOSO HMMEL DHL B U L L E T I N V 5 0 / 5 0 - FETURES Globe bodies for in-line service; angle bodies for difficult service. Each body style accepts all standard trim sets. Balanced plugs for
More information10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction
1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PE PD C D E F Kg
More informationTank Car Fire-Tite Top-Loading and Unloading Valves
Tank Car Fire-Tite Top-Loading and Unloading Valves 1 & 2 7RRR & 7RRT, 2 7RRU Installation, Maintenance and Operating Instructions IMO-R21 EN 11/2017 2 IMO-R21 EN TABLE OF CONTENTS 1. GENERAL... 3 1.1
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More informationDM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
More informationVee-Ball Designs V150, V200 and V300 Rotary Control Valves
January 000 Bulletin 5.3:Vee-Ball Vee-Ball Designs V50, V00 and V300 Rotary Control Valves This bulletin covers the - through -inch, 3- through -inch Series B, and the 4- through 0-inch Designs V50, V00
More information2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive
More informationBULLETIN August 2009 PERMASEAL PLUG VALVE. ISO 9001:2008 Certified QMS. SMG Valves A Unit of Southern Manufacturing Group, Inc.
BULLETIN 13.01-01 August 2009 PERMASEAL ISO 9001:2008 Certified QMS SMG Valves A Unit of Southern Manufacturing Group, Inc. Design and Construction Permaseal Plug Valves are designed for on-off and diverting
More informationTM SERIES Engineered Valves For Pipeline Service Application
Tech Bulletin Page 0-1 Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt
More informationHP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES
BFV-2 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Rev. 09/09 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Now you can turn high pressure applications into low risk decisions by turning to high performance
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API
More informationInstallation, Maintenance and Operating Instructions
Flanged Ball Valves Series 9150, 9180 Model C, Class 150, Full Bore 2, 3, 4 & 6 (DN50, 80, 100 & 150) Series 9300, 9380 Model C, Class 300, Full Bore 2, 3 & 4 (DN50, 80 & 150) Series 7150, 7180 Model C,
More informationID & IP SERIES IN-LINE DISC AND PISTON VALVES
ID & IP SERIES IN-LINE DISC AND PISTON VALVES IN-LINE DISC AND PISTON VALVES M SEAL IN-LINE PISTON VALVE CODE: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded packing
More informationButterfly Valves. Quality Valves at Low Cost
utterfly Valves Quality Valves at ow Cost bout Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and gas,
More informationMETSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW Neles BW series metal seated high performance butterfly valve with one piece body design, for both control and tight shut-off applications. Multiple
More informationNELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More informationBushing Viton O-ring (Other material available) Anti-Static Device
API 607-6th Edition Triac unibody flanged ball valves feature a high quality investment cast body and end. They are available in 1/2 through 6 regular port. Superior leak protection is accomplished by
More informationWKM 320F. Flanged floating ball valves
WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5
More informationIN-LINE DISC & PISTON VALVES
ID & IP Series IN-LINE DISC & PISTON VALVES PROCESS VALVES IN-LINE DISC & PISTON VALVES M Seal In-Line Piston Valve Code: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded
More informationBushing Viton O-ring (Other material available) Anti-Static Device
Triac 88 Series 3 -Piece Ball Valves feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with
More informationKEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL
heavy duty industrial resilient seated butterfly valve GRW - Wafer body design GRL - Lugged body design FETURES GENERL PPLICTION Water, air, dry bulk conveying etc. These valves are for any service where
More informationFisher 8532 High-Performance Butterfly Valve
8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.
More informationKEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationD I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
More informationFLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
More informationF20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
More informationFisher 8532 High-Performance Butterfly Valve
8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.
More informationBS EN ISO 9001 FM Worcester Controls E51/52 Enviro-Safe High Integrity Flanged Ball Valves
BS EN ISO 9001 0086 as FM 00707 Enviro-Safe High Integrity Flanged Ball Valves GENERAL DESCRIPTION With environmental control already established as a major issue for the future, has launched a range of
More informationFSB 35 Fire-Safe FIRE-SAFE ANTI-STATIC
FSB 35 Fire-Safe 0035 FIRE-SAFE ANTI-STATIC /6/EU SAFETY 2 FSB 35 Strong & Reliable (A) ISO52 Actuator Direct Mount Square stem and twin ISO 52 pattern mounting pad allow for easy actuator installation
More information21000 Series Control Valves
GE Oil & Gas Technical Specifications 09/2012 Masoneilan * Valves 21000 Series Control Valves Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB * & Anti-Cavitation Capabilities Table of Contents
More informationBS EN ISO 9001 FM Worcester Controls 5 Series BS 5351 Approved Flanged Ball Valves
BS EN ISO 9001 0086 as FM 00707 Worcester Controls BS 5351 Approved Flanged Ball Valves Worcester is proud to announce the introduction of its new 519/529 range of ball valves which replaces the DN 15-50
More information21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities
GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 21000 Series Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities Table of Contents Numbering System...3
More information310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
More informationKOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).
control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat
More informationHD150/HD300 Heavy Duty Knife Gate Valve
Fabri-Valve HD150/HD300 Heavy Duty Knife Gate Valve HEAVY DUTY VALVES FOR THE OIL SANDS INDUSTRY Heavy Duty Knife Gate Valve The HD150 and HD300 Heavy Duty Knife Gate Valve The Fabri-Valve HD line of Heavy
More informationGachot Ball Valve Type V16 carbon steel / reduced bore / DN 8 to DN 200
carbon steel / reduced bore / DN 8 to DN 200 Three-piece ball valve featuring a unique design for easy and fast maintenance Features pplications Saturated steam. mmonia, natural gas, propane and utilities.
More informationKeystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationKeystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
More information