CONSTRUCTION, PARTS AND MATERIALS P-SERIES ACTUATORS

Transcription

1 Sheet No.: Rev. Date: January 2012 ONSTRUTION, PRTS ND MTERILS P-SERIES TUTORS P Parts Materials Executions Nr. Description Qty. Description Specification Std S.S. Shaft SR 1 ody 1 luminum lloy UNS 13600, STM Piston 2 luminum lloy UNS 03560, STM Endcap PD 2 luminum lloy UNS 13600, STM Endcap PS 2 luminum lloy UNS 13600, STM Drive pinion 1 luminum lloy UNS , STM 7075 T Gear Rack 2 Steel UNS G10950, STM Spring 14 arbon Spring Steel UNS G10860, STM * earing ush 1 Nylatron GS P6.6 + MoS * earing ush 1 Delrin POM * Guide band 2 PTFE, arbon filled PTFE + 25% * Guide band 2 PTFE, arbon filled PTFE + 25% * O-ring 2 Nitrile Rubber una N * O-ring 2 Nitrile Rubber una N * O-ring 1 Nitrile Rubber una N * O-ring 1 Nitrile Rubber una N * Spring lip 1 arbon Spring Steel MIL - R * Thrust Washer 1 ZEDEX 100 K olt 4 lloy Steel 12.9 STM F Endcap bolt PD 20 lloy Steel 8.8 STM F Endcap bolt PS 20 lloy Steel 8.8 STM F * O-ring 2 Nitrile Rubber una N Threaded insert 20 Steel UNS G10430, STM * Recommended spare parts (contained in Repair kit) Notes 1 Hard anodized 2 Deltatone oating 3 Zinc plated and passivated 4 Stainless Steel ISI Stainless Steel, X35rM017 6 SR oating (see ) 7 P4000 has a stainless steel (ISI 304) locking ring between spring clip (20) and thrust washer (21) 8 P4000 has in the springs a guiding bush (PV) DOULE TING PD SINGLE TING PS Remark ll materials are European origin, listed are the nearest US equivalents Finish Standard : Polyester non-tgi based powder coating (see data sheet ) SR : SR oating (see data sheet ) opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

2 Sheet No.: Rev. Date: January 2012 ONSTRUTION, PRTS ND MTERILS E-SERIES TUTORS E Optional center-plate Notes 1 Hard anodized aluminum alloy: lznmgu1.5, DIN 1725/1 2 Deltatone oating 3 nodized 4 Zinc plated and passivated 5 SR oating (see ) 6 Stainless Steel Sandvic 1802, SS Stainless Steel X35rM017 8 No insert, adaptor square direct in pinion Parts Materials Executions Nr. Description Qty. Description Specification Std S.S. Shaft SR 1 ody 1 luminum lloy UNS 13600, STM Piston 2 luminum lloy UNS 03560, STM Drive pinion 1 GlSi10Mg, DIN 1725/2 UNS , STM 7075 T End ap ED 2 luminum lloy UNS 13600, STM End ap ES 2 luminum lloy UNS 13600, STM Spring- inner 2 arbon Spring Steel UNS G10860, STM Spring- mid 2 arbon Spring Steel UNS G10860, STM Spring- outer 2 arbon Spring Steel UNS G10860, STM Spring Holder 2 Steel 45, DIN * Guide and 1 Nylatron P6.6 + MoS * Guide and 2 PTFE, arbon filled PTFE + 25% * earing ush 1 Nylatron P6.6 + MoS * earing ush 1 Delrin POM * O-ring 1 Nitrile Rubber una N * Washer ES 2 Nylon P * Washer ED 2 Nylon P * O-ring 2 Nitrile Rubber una N * O-ring 2 Nitrile Rubber una N * Washer 1 ZEDEX 100 K * O-ring 1 Nitrile Rubber una N * O-ring 4 Nitrile Rubber una N * O-ring 2 Nitrile Rubber una N Washer ES 2 Steel * Spring lip 1 arbon Spring Steel MIL - R End ap olt ED/ES 8 Stainless Steel ISI Limit Stop olt ES 2 Stainless Steel ISI Nut 2 Stainless Steel lsl Limit Stop olt ED 2 Stainless Steel ISI Nut 2 Stainless Steel ISI Nut over 2 Polyethylene PE * O-ring 2 Nitrile Rubber una N Insert 1 luminum lloy UNS , STM Threaded insert 8 Steel UNS G10430, STM * Recommended spare parts (contained in Repair kits) DOULE TING ED SINGLE TING ES Remark ll materials are European origin, listed are the nearest US equivalents. Finish Standard : Polyester non-tgi based powder coating (see data sheet ) SR : SR oating (see data sheet ) opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

3 Sheet No.: Rev. Date: January 2012 ONSTRUTION, PRTS ND MTERILS DS TUTOR DS Nr. Description Qty. Material Specification Note 1 ody DS 1 luminum lloy UNS 13600, STM 85-2 Piston DS 2 luminum lloy UNS 03560, STM 26-3 Drive pinion DS 1 luminum lloy lznmgu1.5, DIN 1725/1 1 4 * Guide and DS 1 Nylatron GS UNS 13600, STM 85-5 am for stroke adj. DS 1 Stainless Steel UNS 13600, STM 85-6 Shaftpin for stroke adj. DS 1 hrome nickel steel UNS G10860, STM * Washer 1 ZEDEX 100 K * Washer 1 Nylon UNS G10860, STM * O-ring shaft top 1 Nitrile Rubber 45, DIN * O-ring limit stop bolt DS 1 Nitrile Rubber P6.6 + MoS2-11 irclip 1 arbon spring steel PTFE + 25% 2 12 Limitstop bolt DS 1 Stainless Steel P6.6 + MoS2-13 Nut 1 Stainless Steel POM - 14 Nut over 1 Polyethylene una N - * Recommended spare parts (contained in Repair kits DS) Finish Polyester non-tgi based powder coating (see data sheet ) Note 1 Hard anodized 2 Deltatone coating Remark This data sheet shows only the extra or specific parts of a DS actuator. For all the other parts see data sheet opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

4 Sheet No.: Rev. D Date: January 2012 LOW TEMPERTURE TUTOR SPEIFITIONS -40 / F / +176 F Silicone MVQ 70 Sealings astrol Optitemp TT1 Low Temperature Grease Description double piston, rack and pinion pneumatic actuator incorporating a three point piston support system, anti-blowout spindle and with high duty synthetic bearings at all bearing points. This version is a standard aluminum actuator, but incorporating parts and materials suitable for low temperature operation. Note When operating actuators in sub-zero temperatures (< 0 or < 32 F) care should be taken to counter the effects of freezing condensate inside the actuator. Specification Max. pressure : 120 psi (8 bar) Torque : Standard Media : ir or non corrosive gas Temperature : -40 F to +176 F (-40 to +80 ) Finish : Polyester non-tgi based powder coating (see data sheet ) Spare parts Dedicated low temperature spare parts are available for maintenance or make a standard actuator suitable for low temperature operation. Materials Part Material Specifications Remark Housing luminum lloy UNS 13600, STM 85 luminum lloy UNS , STM 7075 T6 Hard anodized Drive Shaft Steel (180 rotation) ETG100 or 42rMo4V XM Zinc Plated type > P750 Stainless Steel Sandvic 1802, SS2382 or X35rM017 type > E950 Piston luminum lloy UNS 03560, STM 26 Sealings Silicone MVQ 70 O-rings -/- Grease astrol Optitemp TT1 -/- Shaft bearings Top : Delrin POM ottom : Nylatron P6.6 + MoS2 Piston bearings PTFE 25% arbon filled ody bearings PTFE ( P series) 25% arbon filled Nylatron ( E series) P6.6 + MoS2 Shaft thrust washer ZEDEX 100 K -/- End cap bolts Stainless Steel ( E series) ISI lloy Steel ( P series) 8.8 DIN 912 Deltatone coating Springs arbon Spring Steel UNS G10860, STM 228 Deltatone coating opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

5 Sheet No.: Rev. Date: January 2012 HIGH TEMPERTURE TUTOR SPEIFITIONS -20 / F / +248 F Viton FPM Sealings astrol LMX Grease Description double piston, rack and pinion pneumatic actuator incorporating a three point piston support system, anti-blowout spindle and with high duty synthetic bearings at all bearing points. This version is a standard aluminum actuator, but incorporating parts and materials suitable for high temperature operation. Specification Max. pressure Torque Media Temperature Finish : 120 psi (8 bar) : Standard : ir or non corrosive gas : -4 F to +248 F (-20 to +120 ) : Polyester non-tgi based powder coating (see data sheet ) Spare parts Dedicated high temperature spare parts are available for maintenance or make a standard actuator suitable for high temperature operation. Materials Part Material Specifications Remark Housing luminum lloy UNS 13600, STM 85 luminum lloy UNS , STM 7075 T6 Hard anodized Drive Shaft Steel (180 rotation) ETG100 or 42rMo4V XM Zinc Plated type > P750 Stainless Steel Sandvic 1802, SS2382 or X35rM017 type > E950 Piston luminum lloy UNS 03560, STM 26 Sealings Viton FPM O-rings -/- Grease astrol LMX -/- Shaft bearings Top : Delrin POM ottom : Nylatron P6.6 + MoS2 Piston bearings PTFE 25% arbon filled ody bearings PTFE ( P series) 25% arbon filled Nylatron ( E series) P6.6 + MoS2 Shaft thrust washer ZEDEX 100 K -/- End cap bolts Stainless Steel ( E series) ISI lloy Steel ( P series) 8.8 DIN 912 Deltatone coating Springs arbon Spring Steel UNS G10860, STM 228 Deltatone coating opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

6 Sheet No.: Rev. Date: January 2012 TEHNIL DETILS, STNDRD TUTOR E/P P-Series E-Series PD = Double acting ED = Double acting 11 djustable range* 91 Open 91.5 * only standard on E-Series actuators PS = Spring return ES = Spring return -0.5 losed Specification Pressure range : Double acting 20 to 120 psi : Spring return 80 to 120 psi,, with max. spring set 40 to 120 psi, reduced spring quantity : 180 actuators 87 psi maximum Torque : 1133 to 40,000 in.lb at 80psi supply See torque data sheets and Operating media : ir, dry or lubricated and inert gasses : For sub-zero applications take appropriate measures Temperature : -4 to +176 F Lubrication : Factory lubricated for the normal life of the actuator onstruction : Suitable for indoor and outdoor installation Finish : Polyester non-tgi based powder coating (see data sheet ) Rotation Double acting Spring return TUTOR TYPE E12 E25 E40 E65 E100 E150 E200 E350 E600 E950 E1600 P2500 P4000 ore inch Stroke inch Weight: Double acting lb Spring return lb Operating time sec ir consumption at 1 atm (cu./in.) : 91.5 (-0.5 W to 91 W) : Standard counter clockwise with port "" pressurized (code, see data sheet for other assembly codes) : lockwise fail action (code, see data sheet for other assembly codes) Limit stops : Standard on E-Series. djustable range 91 /80 : Optional on P-Series. See data sheet : For double stroke adjustment. See data sheet European Directives PED : ll actuators are suitable for use with Group 2 gasses according to Pressure Equipment Directive 97/23/E : Optional : actuators suitable for use with Group 1 gasses TEX : ll basic actuators are suitable for use in hazardous area's classified II 2 GD, zones 1 or 2 (Gasses) RoHS and 21 or 22 (Dust) : This product is only intended for use in large-scale fixed installations excluded from the scope of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2). Russian pprovals El-O-Matic E and P series pneumatic actuators are available with the GOST-R and Rostechnadzor (RTN) approvals. Note 1. Operating time is average with actuator under load and solenoid valve fitted. 2. ir consumption is the actual free air volume at 1 atm. 3. Pressure is in barg. port stroke port stroke ,068 opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

7 Sheet No.: Rev. D Date: January O-MTI SI PNEUMTI TUTOR ONFIGURTION E/P Single or Double action ES or PS = Single acting, ED or PD = Double acting ctuator size E-Series 0012 = E = E = E = E = E = E = E = E = E = E = E1600 P-Series 2500 = P = P4000 Valve flange Metric Metric UN/NPT Finish ISO 5211 DIN 3337 ISO 5211 M = D = U = Standard N = E = V = SR coating (2 + luminum pinion O = F = W = SR coating (2 + Stainless Steel pinion (3 Limit stops 0 = No limit stops 1 = L1 One way limit stops 2 = Double Stroke djustment Standard on P-Series Standard on E-Series Standard on DS-Series ssembly code ode ction Rotation Mounting = Spring to close clock wise in line with pipeline = Spring to close clock wise across pipeline = Spring to open counter clock wise across pipeline D = Spring to open counter clock wise in line with pipeline Spring set E-Series Spring set P-Series 00 = Double acting actuator 00 = Double acting actuator 01 = Springset 1 04 = Springset 4 04 = Springset 4 10 = Springset = Springset 2 05 = Springset 5 06 = Springset 6 12 = Springset = Springset 3 06 = Springset 6 08 = Springset 8 14 = Springset 14 Future expansion = Standard Default Insert Size (in mm.) (1 E12 E25 E40 E65 E100 E150 E200 E 350 E600 E950 E1600 P2500 P ISO or UN DIN See following data sheets for more information / / / / / / / / Visual Indication ode D = Disk K = Knob N = No visual indication ES 0040.M N 1 Temperature range 0 = Standard TS: 80 (176 F) -20 ( -4 F) 1 = High temp TS: 120 (248 F) -20 ( -4 F) 2 = Low temp TS: 80 (176 F) -40 (-40 F) (1 ctuators E12, P2500 and P4000 have no inserts. They have have a inner square the shaft 180 actuators are not covered by this configuration matrix. (2 SR oating not possible in combination with Double Stroke djustment limit stops (DS series). (3 Stainless Steel Pinion not possible in combination with Double Stroke djustment limit stops (DS series) / opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

8 Sheet No.: Rev. Date: November 2009 DIMENSION SHEET TUTOR ISO E12 (90 /180 ) UN10-24x.31 J 1/4" W1 X øp T E F E2 L L1 øv 0.16 W W2 U K1 R R1 G K D 1.77 DOULE TING TORQUE (ED) M N ± I O H Pressure psi Torque 90 /180 (in.lb.) SINGLE TING TORQUE (ES) Y ir stroke Pressure psi Spring stroke Position - start end start end start end start end Torque 90 (in.lb.) Torque 180 (in.lb.) Dim. in Inches ED ES D E E F G H I J K K L L M N Omax Omin P R R T U V W UNx.24" UNx.24" W UNx.24" UNx.24" W UNx.24" UNx.24" X 1/8"NPT 1/8"NPT Y M6x.48 M6x.48 opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

9 Sheet No.: Rev. E Date: ugust 2011 DIMENSION SHEET STNDRD TUTOR - ISO E/P U1 E-series M1 M2 M3 N ±0.02 øv øv1 E25-E950 E1600 øp T S1 E F E2 øp2 øp1 øk S S W W1 O R UN 10-24x.31 R1 G J D 1/4 NPT I W øp P-series M1 W UN 10-24x M6x.47 H øk T øv S N ±0.02 W2 O U R P2500 W1 Dim. in inch ctuators E-series P-series E 12 E 25 E 40 E 65 E100 E150 E200 E 350 E600 E950 E1600 P2500 P4000 D SR D E E F G H I J K M M M N O max O min P P P R R R S S T U F03 F05 F05 F05 F07 F07 F07 F10 F10 F16 F16 F16 V W /4"-20 1/4"-20 1/4"-20 5/16"-18 5/16"-18 5/16"-18 3/8"-16 3/8"-16 3/4"-10 3/4"-10 3/4"-10 x.31" x.39" x.39" x.39" x.39" x.39" x.39" x.63" x.63" x1.14" x1.14" x1.14" F05 F07 F07 F07 F10 F10 F10 F12 F F25 V W1 For E12 dimensions see data sheet /4"-20 x.39" 5/16"-18 x.39" 5/16"-18 x.39" 5/16"-18 x.39" 3/8"-16 x.63" 3/8"-16 x.63" 3/8"-16 x.63" 1/2"-13 x.79" 5/8"-11 x.98" - - "5/8""-11 x.98" /8-11 x.98 R2 øv1 øv R R2 P4000 Note 1. Flange and square drive to ISO Top and solenoid flange to VDI/VDE 3845 (NMUR) 3. For P-series actuators with limit stops see opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

10 Sheet No.: Rev. Date: ugust 2011 DRIVE INSERTS FOR -O-MTI TUTORS E Standard available insert shapes sq Max. Insert mounting acc. ISO 5211 Ø P2 Ø P1 Description Most of the El-O-Matic actuators are fitted with drive inserts. This enables actuators to be directly mounted onto suitable valves and eliminates the need for a bracket and coupling type mounting kit. The use of direct mounts significantly cuts the cost of the valve/actuator assembly. Standard actuators are fitted with square drive inserts in accordance with ISO 5211 (or DIN 3337), but a wide variety of other inserts are also available. Special inserts may have oversize or undersize squares, double-d and shaft key way forms. Optional available insert shapes D Max. M1 M2 Drive inserts can be supplied on factory built actuators or as loose items and are easily replaceable at distributor or end user level. Where direct mounts are not possible, for instance on valves with exposed grand packing, the use of inserts often simplifies the design of the mounting kit. Material : luminum alloy Finish : nodized D Max. The following actuator types do not have inserts. - E12, - P2500 and P actuators Standard inserts with inner-square-dimensions per actuator type E25 E40 / E65 E100 E150 E200 E350 E600 E950 E Optional insert dimensions Maximum insert dimensions M M P P SQ max D max These actuators have inner square directly in the bottom of the pinion. See the following data sheets for more information : E12 ISO P2500/P4000 ISO ISO opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

11 Sheet No.: Rev. Date: January 2010 DOULE TING TUTOR TORQUE (In.lb.) 90 DOULE TING TORQUE Start End Torque Rotation -0.5 LOSED 91.5 ctuator Torque of double acting actuators (in In.lb) Supply pressure (psi) Type Size ED ED ED ED ED ED ED ED ED ED ED PD PD Note 1. Emerson recommends that the valve manufacturer supply the maximum required torque values (Including any adjustments or suggested safety factors for valve service conditions or application). dditionally, the valve manufacturer must identify at which position(s) and direction(s) of rotation (ounter lock Wise or lock Wise) these maximum requirements occur. 2. If in doubt, or you require any assistance with sizing actuators, do not hesitate to contact your nearest Emerson's Valve utomation Division representative. 3 Pressure on port "" opens the actuator* 4 The actuator is shown in closed position* (* code, data sheet 1.503) 91 OPEN opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

12 Sheet No.: Rev. Date: January 2010 SPRING RETURN TUTOR TORQUE (In.lb.) 90 Start Torque D E 91 OPEN SINGLE TING TORQUE IR STROKE Rotation ounter lockwise 91.5 D End E Start F SPRING STROKE Rotation lockwise -0.5 LOSED F End Note 1. Emerson recommends that the valve manufacturer supply the maximum required torque values (Including any adjustments or suggested safety factors for valve service conditions or application). dditionally, the valve manufacturer must identify at which position(s) and direction(s) of rotation (ounter lock Wise or lock Wise) these maximum requirements occur. 2. If in doubt, or you require any assistance with sizing actuators, do not hesitate to contact your nearest Emerson's Valve utomation Division representative. 3 Pressure on port "" opens the actuator* 4 The actuator is shown in closed position* (* code, data sheet 1.504) Springset ir Stroke (lbf/in) nr. SUPPLY PRESSURE (in PSI) Spring Stroke ctuator (lbf/in) Type D D D D D E F PS PS Springset ir Stroke (lbf/in) nr. SUPPLY PRESSURE (in PSI) Spring Stroke ctuator (lbf/in) Type D D D D D E F ES ES ES ES ES ES ES ES ES ES ES opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

13 Sheet No.: Rev. Date: November 2009 DIMENSION SHEET STNDRD 180 TUTOR 180 P60 - P750 M5x G1/4" M6x.47 I 4 H M1 K M5x.31 N ±0.02 J 3 R2 1 R U1 T S1 E1 F E2 S øv1 øv M5x.31 R1 2 O U G D Dim. TUTOR TYPE in mm. E12 P60 P150 P280 P500 P750 P1100 P2500 P4000 D SR D E E F G H I J K M N O max O min P R R R S S T T U U F05 F07 F07 F10 F10 F14 F16 F16 V W M6 x.35 M8 x.51 M8 x.51 M10 x.63 M10 x.63 M16 x.79 M20 x1.18 M20 x1.18 F07 F10 F10 F12 F F25 V W1 M8 x.51 M10 x.63 M10 x.63 M12 x.63 M12 x M16 x 0.98 W M16 x For E12 dimensions see G1/2" øv1 W1 øv øp T W2 W 4xW 8xW1 Note 1. Flange to ISO 5211, square drive to DIN Top and Solenoid flange to VDI/VDE 3845 (NMUR). P1100 P2500 and P4000 have a non-nmur solenoid flange with 1/2" entries actuators are standard equipped with "L1" limit stops. 120 or 135 rotation is possible with optional LF-option (See data sheet ) P P4000 P4000 opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

14 Sheet No.: Rev. Date: June DOULE TING TUTOR TORQUE (In.lb.) 180 STRT TORQUE ROTTION END ctuator type Torque (in in.lb) Supply Pressure (PSI) ED PD PD PD PD PD PD PD PD Note 1. Emerson recommends that the valve manufacturer supply the maximum required torque values (Including any adjustments or suggested safety factors for valve service conditions or application). dditionally, the valve manufacturer must identify at which position(s) and direction(s) of rotation (ounter lock Wise or lock Wise) these maximum requirements occur. 2. If in doubt, or you require any assistance with sizing actuators, do not hesitate to contact your nearest Emerson's Valve utomation Division representative. 3. Pressure on port "" opens the actuator* 4. The actuator is shown in closed position* 5. Do not exceed the maximum supply pressure of 6 bar / 87psi. (*code, data sheet 1.503) opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

15 Sheet No.: Rev. Date: June SPRING RETURN TUTOR TORQUE (In.lb.) 180 Start Torque D E 181 IR STROKE Rotation ounter lockwise D End 182 E Start SPRING STROKE Rotation lockwise Note 1. Emerson recommends that the valve manufacturer supply the maximum required torque values (Including any adjustments or suggested safety factors for valve service conditions or application). dditionally, the valve manufacturer must identify at which position(s) and direction(s) of rotation (ounter lock Wise or lock Wise) these maximum requirements occur. 2. If in doubt, or you require any assistance with sizing actuators, do not hesitate to contact your nearest Emerson's Valve utomation Division representative. 3. Pressure on port "" opens the actuator* 4. The actuator is shown in closed position* 5. Do not exceed the maximum supply pressure of 6 bar / 87psi. (*code, data sheet 1.504) F End F -1 ctuator type Spring nr. ir Stroke (in.lb.) Spring SUPPLY PRESSURE (PSI) Stroke (in.lb.) D D D D D E F ES PE PE PE PE PE PE PE PE opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

16 Sheet No.: Rev. Date: January O-MTI TUTOR WITH ONE WY LIMIT STOPS L1/LF D DOULE TING SPRING RETURN Dim. TUTOR TYPE in inch P2500 P D Description ctuators with one way adjustable limit stops are used where the maximum opening (or closing) position of the valve needs to be reduced. For instance to adjust the maximum capacity of a remote operated valve. lso actuators with 180 rotation are available with these stops. Operation Stop screws are fitted to both endcaps and the screw length is such that adjustment is possible through the specified rotation of the actuator. The modified endcap is machined for -0.5 to +93 rotation for all P-Series models. Identification L1 is added to the basic part number i.e. PD2500-L1 10x P2500 3/4"-10x1.14 5/8"-11x.98 5/8"-11x.98 Specification: Pressure : Up to 120 PSI Media : ir, dry or lubricated or non-corrosive gas Torque (90 ) : Data sheet (180 ) : Data sheet P-Series and Other dimensions : Data sheet XXX (90 ) : Data sheet (180 ) Temperature : -4.0 to +176 F djustable range : (90 ) or (180 ) djustable position (see data sheet or 1.504) code position Valve open (spring to close) Valve open (spring to close) Valve closed (spring to open) D Valve closed (spring to open) Note: 1) an be provided with extra long screws for full range adjustment (identification: PD2500-LF) 2) This option in combination of a manual override gearbox is redundant /4" P4000 Open 3 10 djustable range 90 actuator djustable range 180 actuator Note: Do not adjust under pressure losed Open losed opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

17 Sheet No.: Rev. Date: November 2009 LIMIT STOP PLTE DIMENSIONS LS 420 Description These limit stop plates are used when precise control is required for both end of stroke positions. It is possible to adjust 15 of both ends of the standard stroke. onstruction The complete stop plate assembly may be added to the 90 P- series actuators. The assembly is normally sandwiched between the actuator and mounting surface of the valve or bracket. earing rings are used at both surfaces to provide a long life expectancy. E The unit is assembled with a drive adaptor which passes through the stop plate, into the square actuator and provides the coupling between the two components. This drive adaptor normally also accommodates the coupling of the valve stem. Identification "LS420" is added to the basic part number i.e. PD2500-LS420 Other dimensions See data sheet xxx ctuator base Option Version for 180 or DIN-standard actuator Drive shaft Gmax. F W O V Hmax. over plate Housing limit stop Drive adaptor am Note: over plate only in combination with P2500 Open djustable range 90 actuators -15 losed +0.5 Dim. TUTOR TYPE in inches P2500 P4000 E F G H O V W M20x30 M20x30 opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

18 Sheet No.: Rev. Date: November O-MTI TUTOR WITH DOULE STROKE DJUSTMENT DS Open stopscrew (2) adjustable range Description ctuators with double stroke adjustment are normally used for high performance butterfly valves where a fine adjustment is required for the closed position. In this version adjustment is provided at the end of the opening and closing stroke positions. DS actuators may be double acting or spring return, though are normally used as spring return (fail close) actuators. 15 Operation The closed position is adjusted by means of the stop-screw (1) located in the actuator body and for the open position by the stop-screws (2) in the actuator end caps. D Factory option: Fail to Open D L L Y L L Y J 1 I X J 1 3 losed stopscrew (1) I X 15 3 Identification See data sheet Specification Pressure : Up to 120 psi Operating media : ir, dry or lubricated or non corrosive gas Torque (90 ) : Data sheet Rotation - - Spring return : lock-wise on air failure. - Double acting : ounter clock-wise with port pressurised. Other dimensions : Data sheet XXX Temperature : -4 to +176 F djustable range : losed position (1), Open position (2), Dim. in inch. ctuator type H E25 E40 E65 E100 E150 E200 E350 E600 E950 E1600 D SR D H I J L Y 1/4"-20 5/16"-18 5/16"-19 3/8"-16 3/8"-16 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 X X max H Note 1) an be provided with extra long end-cap stop screws for full range adjustment of the open position. 2) This DS option is not required on actuators fitted with manual override gearboxes, as MO gearboxes already incorporate this function. Important 1) "Fail open" is factory option. 2) When assembled for fail open operation (code D; see data sheet 1.504), both stop-screws (1) and (2) will adjust the closed position. There is no adjustment for the open position! Factory option: "Fail open" Stroke adjustment cam 1 2 opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

19 Sheet No.: Rev. Date: November 2009 DOULE TING TUTOR SSEMLY MODES E/P -port pressurized -port pressurized -port pressurized -port pressurized Pistons Shaft ll views are from above Pistons are shown in inner position STNDRD MOUNTING IN LINE MOUNTING ROSS LINE PISTONS TURNED 180 (from standard) D SHFT TURNED 90 (from standard) MOUNTING ROSS LINE (OPTIONL L1/LF) LIMIT STOPS WILL DJUST THE VLVE T OPEN POSITION (OPTIONL L1/LF) LIMIT STOPS WILL DJUST THE VLVE T LOSED POSITION MOUNTING IN LINE SHFT TURNED 90 PISTONS TURNED 180 (from standard) -port pressurized -port pressurized -port pressurized -port pressurized opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )

20 Sheet No.: Rev. Date: November 2009 SPRING RETURN TUTOR SSEMLY MODES E/P -port pressurized Spring stroke -port pressurized Spring stroke Springs Pistons Shaft ll views are from above Pistons are shown in inner position STNDRD MOUNTING IN LINE MOUNTING ROSS LINE PISTONS TURNED 180 (from standard) SPRING TO LOSE (ROTTION W) SPRING TO OPEN (ROTTION W) D SHFT TURNED 90 (from standard) MOUNTING ROSS LINE MOUNTING IN LINE SHFT TURNED 90 PISTONS TURNED 180 (from standard) Spring stroke -port pressurized Spring stroke -port pressurized opyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest ctuation Technologies enter: merica: (fax ) Europe: (fax ) sia Pacific: (fax ) Middle East: (fax )