Body material: Stainless steel 304 Seal material: Fluororubber (Special FKM) Both plug and socket have an integral check valve.

Size: px
Start display at page:

Download "Body material: Stainless steel 304 Seal material: Fluororubber (Special FKM) Both plug and socket have an integral check valve."

Transcription

1 S Couplers KK Series Stainless steel type material: Seal material: Fluororubber () Both plug and socket have an integral check valve. vailable with and without check valves depending on the operating conditions. Plug valve valve Non-greased specification (standard) llows smooth installation and removal even without grease O-ring: Sliding parts of plug and socket: is used. RoS Reduces liquid dripping when the plug and socket are uncoupled. iquid dripping:. to. cm at each removal eration:. to. cm at each removal KQ KQB KS KX K KF /D / KC KK KK D KD KB KR K KQG KG KFG S KK KP Q QR IDK Fluid: Water, ir Operating temperature range: to C Note) his product should not be used with steam.

2 KK Series ale thread type / / / / / / / / Plug (P) Part no. Port R / R / R / R R R / R R / R / KKP- - KKP- KKP KKP - KKP - - KKP- - - KKP KKP KKP- - - Port Rc / Rc / Rc / Rc Rc Rc / Rc Rc / Rc / KKP-F -F KKP-F KKP KKP -F KKP -F -F KKP-F -F -F Part no. KKP-F- -F- - KKP-F- - - KKP- - - ale thread type (S) / / / / / / / / Part no. Port R / R / R / R R R / R R / R / KKS- - KKS- KKS KKS - KKS - - KKS- - - KKS KKS KKS- - - Port Rc / Rc / Rc / Rc Rc Rc / Rc Rc / Rc / Part no. KKS-F -F KKS-F KKS KKS -F KKS -F -F KKS-F -F -F KKS-F- -F- - KKS-F- - - KKS- - - Refer to pages to for Specific Product Precautions.

3 S Couplers KK Series RoS Stainless steel type Symbol With check valve Without check valve Check valve on both sides: Check valve on single side: No check valve on either side: Characteristics with check valve on both sides Single plug / / / / Single socket Connected plug and socket iquid dripping eration cm at each removal cm at each removal KK KK KK KK KK KK iquid dripping: Volume of water leakage at the time when the plug and socket are uncoupled. eration: Volume of external air entrained when the plug and socket are connected. Built-in check valve Plug Yes No No Yes /Plug designation P Plug S Yes Yes No No vailability Note) plug with check valve should be used in combination with a socket with check valve. If a socket without check valve is used, the check valve of the plug will not open. Specifications Fluid Operating Note ) Water, ir KK: kpa to Pa pressure range Proof pressure mbient and fluid temperature Non-greased specification aterial Seal KK////: to Pa Pa to C (No freezing) Note) his product should not be used with steam. No grease is used. (Rubber, etal sliding parts: ) etal part:, Rubber material: Fluororubber () With male thread sealant Note ) Do not use the S couplers with a leak tester or for vacuum retention because they are not guaranteed for zero leakage. Performance Plug and socket connection One-touch connection and release Check valve Check valve on both sides, Note) KK series cannot be connected with KK series or KK series. rea Built-in check valve Plug: : Plug: : Plug: : ow to Order KK P Symbol Port hread R, Rc / R, Rc / R, R, R, R, Rc R, Rc / R, Rc / Plug KKP-F KKP-F KKP KKP KKP-F KKP-F KKP-- KKP-- KKP- KKP-- KKP-- KKP- KKS-F KKS-F KKS KKS KKS-F KKS-F KKS- KKS- KKS KKS-- KKS-- KKS Built-in check valve Nil - Note) KK// is not available without a check valve. Contact us when such a type is needed. type Symbol F ype ale thread (with sealant) Female thread KQ KQB KS KX K KF /D / KC KK KK D KD KB KR K KQG KG KFG S KK KP Q QR IDK

4 KK Series Flow Rate Characteristics ir Plug: : Flow rate m /min (NR) KK Series (KKP-F+KKS-F) Pressure Pa KK Series (KKP+KKS) KK Series (KKP-F+KKS-F) Plug: : Flow rate m /min (NR) KK Series (KKP-F+KKS-F) KK Series (KKP+KKS) Pressure Pa KK Series (KKP-F+KKS-F) Plug: : Plug: : Flow rate m /min (NR) KK Series (KKP-+KKS) KK Series (KKP--+KKS-) Flow rate m /min (NR) KK Series (KKP-+KKS-) KK Series (KKP--+KKS--) KK Series KK Series (KKP--+KKS-) (KKP--+KKS--) Pressure Pa Pressure Pa Pressure oss Water Plug: :.. KK Series (KKP-F+KKS-F) Plug: :.. KK Series (KKP-F+KKS-F) Pressure loss Pa..... KK Series (KKP-F+KKS-F) Pressure loss Pa..... KK Series (KKP+KKS) KK Series (KKP-F+KKS-F) Flow rate m /min KK Series (KKP+KKS)..... Flow rate m /min

5 S Couplers KK Series Construction KQ KQB KS KX K KF Plug /D / KC KK KK D KD Plug No. Description aterial Stem Rear stem Plug valve Valve O-ring Stem O-ring Equivalent to Plug valve spring Note KK KK,,,, No. Description Rear body valve Collar Sleeve Valve O-ring Plug O-ring O-ring Collar seal Collar spring Sleeve spring Steel ball Stopper ring aterial Equivalent to Note Plated with fluorine-contained material KK,, KK,, KB KR K KQG KG KFG S KK KK Series Spare Parts Description Plug O-ring Product no. KKS-P KKS-P KKS-P KKS-P KKS-P KKS-P No. KP Q QR IDK

6 KK Series Dimensions/Plug (P) ale thread type / / / / KKP- - KKP- KKP KKP - KKP - - KKP- - - port R / R / R / R R R / R R / R / g / / / / KKP-F -F KKP-F KKP KKP -F KKP -F -F KKP-F -F -F port Rc / Rc / Rc / Rc Rc Rc / Rc Rc / Rc / g

7 S Couplers KK Series Dimensions/ (S) ale thread type / / / / KKS- - KKS- KKS KKS - KKS - - KKS- - - port R / R / R / R R R / R R / R / g KQ KQB KS KX K KF /D / KC KK KK / / / / KKS-F -F KKS-F KKS KKS -F KKS -F -F KKS-F -F -F port Rc / Rc / Rc / Rc Rc Rc / Rc Rc / Rc / g D KD KB KR K KQG KG KFG S KK KP Q QR IDK

8 KK Series Dimensions/Plug (P) ale thread type / / / KKP KKP KKP- - - port R / R / R / g / / / KKP-F- -F- - KKP-F- - - KKP- - - port Rc / Rc / Rc / g Dimensions/ (S) ale thread type / / / KKS KKS KKS- - - port R / R / R / g / / / KKS-F- -F- - KKS-F- - - KKS- - - port Rc / Rc / Rc / g

Applicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material

Applicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material Flame Resistant (Equivalent to UL-94 Standard V-0) FR One-touch Fittings KR-W2 Series RoS Guide Collet Chuck ccepts nylon. Large retaining force. he chuck provides secure retention and the collet increases

More information

Valve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck

Valve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.

More information

Digital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.

Digital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen. Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer

More information

H/DL/L/LL Series. Tube. Union nut. Flared I.D. Flared I.D. can prevent the tube from deforming inwards. Specifications

H/DL/L/LL Series. Tube. Union nut. Flared I.D. Flared I.D. can prevent the tube from deforming inwards. Specifications Flared ridge ferrule Prevents accidental loss of ferrule when inserting into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening nut. Flared I.D. Provides low flow resistance

More information

Rectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND

Rectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND Rectangular Multi-connector Series KDM No. of Connecting Tubes: 10, RoHS Multi-connector is effective in saving labor for separate transportation of the panel and the machine, and for exchanging units

More information

Miniature Fittings Stainless Steel 316. Hose nipple. Barb. Configuration for easy insertion into the tube Holds the tube tightly.

Miniature Fittings Stainless Steel 316. Hose nipple. Barb. Configuration for easy insertion into the tube Holds the tube tightly. iniature Fittings Stainless Steel 316 Series S RoHS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose

More information

Rectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND

Rectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND Rectangular Multi-connector KDM Series No. of Connecting Tubes: 1, 2 RoHS Multi-connector is effective in saving labor for separate transportation of the panel and the machine, and for exchanging units

More information

Stainless Steel 316 One-touch Fittings

Stainless Steel 316 One-touch Fittings CT.ES50- Stainless Steel One-touch Fittings aterial etal parts: Stainless steel Seal parts: Special FK Can be used with steam Operating fluid temperature 5 to 0 C Grease-free tubing material FEP, PF, Nylon,

More information

Tubing. Barb. Sleeve. Attaching the sleeve achieves a larage retaining force. Detaching it allows easy removal of the tube. Electroless nickel plated

Tubing. Barb. Sleeve. Attaching the sleeve achieves a larage retaining force. Detaching it allows easy removal of the tube. Electroless nickel plated iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page 9 for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing

More information

Low Torque Rotary Joint

Low Torque Rotary Joint Low Torque Rotary Joint MQR Series Metal Seal Type Long service life billion rotations MQR : billion rotations MQR : 0. billion rotations MQR : 0. billion rotations MQR8 : 0. billion rotations MQR: 0.

More information

Applicable Tubing. Tubing material Note1) Tubing O.D. Note 1) ø2 is available in polyurethane only. Specifications

Applicable Tubing. Tubing material Note1) Tubing O.D. Note 1) ø2 is available in polyurethane only. Specifications One-touch Mini : Metric Size Connecting : M3, M5, R1/8 Outside diameter reduced y 0% (Compared with series KQ), allowing piping in a narrower space. Thread sealant as standard. For application requiring

More information

Insert Fittings. Series KF. Superior tube mounting. A reliable seal Holds the tube tightly

Insert Fittings. Series KF. Superior tube mounting. A reliable seal Holds the tube tightly Insert Fittings Series KF A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials Tube grip (resin sleeve) Tube

More information

S Couplers. Series KK. Series KKH. Series KK/KKH. RoHS KQ2 KQB2

S Couplers. Series KK. Series KKH. Series KK/KKH. RoHS KQ2 KQB2 Series KK/KK he pullin strenth for the plus and sockets has been improved. wice as stron as the conventional models. Series KK With sleeve lock (Except for ) Effective area 3. to 2 mm 2 Series Series KK

More information

One-touch Fittings 23% 24% 57% KQ2-G Series CAT.ES50-39A. 30% reduction. force 20% reduction 1. Stainless Steel. Improved tube insertion/removal

One-touch Fittings 23% 24% 57% KQ2-G Series CAT.ES50-39A. 30% reduction. force 20% reduction 1. Stainless Steel. Improved tube insertion/removal Stainless Steel One-touch Fittings etal material: Stainless steel 303 RoS Improved tube insertion/removal Insertion : force ax. 30% reduction ax. Removal : force 20% reduction : Tube removal strength is

More information

Check Valve with One-touch Fitting. Male Connector Type Can be mounted directly onto equipment. Can be used for vacuum ( 100kPa)

Check Valve with One-touch Fitting. Male Connector Type Can be mounted directly onto equipment. Can be used for vacuum ( 100kPa) N7 K/KB Series Check with One-touch Fittin ale Connector Type Can be mounted directly onto equipment Bushin Type Can be used in applications with splashin coolant and spatter, etc. Straiht Type Easily

More information

Plug: KBP Elbow module: KBV Female connector union: KBH. Tubing. Guide. Chuck Collet. O-ring Lock ring. Spring Spring guide. Specifications.

Plug: KBP Elbow module: KBV Female connector union: KBH. Tubing. Guide. Chuck Collet. O-ring Lock ring. Spring Spring guide. Specifications. Piping Module Series KB RoHS Plug: KBP Elbow module: KBV Female connector union: KBH Lock ring Plug body hread Spring Spring guide Release button (blue) Seal Stud Universal elbow body ubing Guide Chuck

More information

How to Order. M5 M5 x 0.8 U10/ UNF

How to Order. M5 M5 x 0.8 U10/ UNF Series -S-FSG Push-lock ype RoHS Speed Controller with Indicator Stainless Steel ype (Elbow/Universal) How to Order 1 ype 2 Elbow 3 Universal Body size -32UNF Port size 5 U/32-32UNF Stainless steel type

More information

Port size AK AK AK AK /04 AK /10. Specifications

Port size AK AK AK AK /04 AK /10. Specifications Check Valve AK Series RoS arge flow capacity ow cracking : 0.02 Pa A wide variation of models AK2000-01 AK2000-02 AK000-02 1 8 1 1 dm /(s bar). 9. Critical ratio Weight (g) 0 1 AK000-0 8 0.2 10 AK000-0

More information

Metal One-touch Fittings

Metal One-touch Fittings etal One-touch Fittings Compact and ight pprox. 0% Comparison with KB06-01S Down NEW KB206-01S 1. mm New RoS Conventional model KB06-01S.1 mm pprox. 62% Comparison with KB06-01S ore configuration variations

More information

Mini Free Mount Cylinder

Mini Free Mount Cylinder Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded

More information

Speed Controller with One-touch Fitting

Speed Controller with One-touch Fitting Speed Controller with One-touch Fitting S Series Push-lock Type Reduces labor time! Easy to use Easy to lock Unlock Push-lock type Lock Improved tube insertion/removal Max. Insertion force: 30% (8 N) reduction

More information

Clean One-touch Fittings

Clean One-touch Fittings Clean One-touch Fittins Series KP/KP/KPG K KK D S T Series KP Series KP Series KPG 2 One-touch fittins and for blowin systems and drive air One-touch fittins (for blowin) Series KP Collet Polypropylene

More information

Applicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications

Applicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small

More information

Speed Controller with Indicator

Speed Controller with Indicator Speed Controller with Indicator The numerical indication of flow rate knob rotations reduces flow setting time and setting errors! Elbow Universal Brass Electroless nickel plated RoHS Stainless steel 1

More information

Discrete direct acting 3 port solenoid valve (general purpose valve) AG31/AG41 Series. Universal type Port size: Rc1/8, Rc1/4, Rc3/8

Discrete direct acting 3 port solenoid valve (general purpose valve) AG31/AG41 Series. Universal type Port size: Rc1/8, Rc1/4, Rc3/8 G3141 Series iscrete direct acting 3 port solenoid valve (general purpose valve) G31/G41 Series Universal type Port size: Rc1/8, Rc1/4, Rc3/8 JIS symbol G31/41: Universal type COM NO NC Common specifications

More information

Discrete direct acting 3 port solenoid valve (general purpose valve) Universal type Port size: Rc1/8, Rc1/4, Rc3/ to to 60 B

Discrete direct acting 3 port solenoid valve (general purpose valve) Universal type Port size: Rc1/8, Rc1/4, Rc3/ to to 60 B G31/41 Series iscrete direct acting 3 port solenoid valve (general purpose valve) G31/41 Series Universal type Port size: Rc1/8, Rc1/4, Rc3/8 Refer to nding 17 for more details. JIS symbol G31/41: Universal

More information

Discrete direct acting 3 port solenoid valve (general purpose valve) NC pressurization type. Port size: Rc1/8, Rc1/4, Rc3/8

Discrete direct acting 3 port solenoid valve (general purpose valve) NC pressurization type. Port size: Rc1/8, Rc1/4, Rc3/8 iscrete direct acting 3 port solenoid valve (general purpose valve) 33/43 Series pressurization type Port size: Rc1/8, Rc1/4, Rc3/8 Refer to nding 17 for more details. JIS symbol 33/43: pressurization

More information

How to Order. Nozzle. Nil Connection size N02 N03 F02 F H06 H08 H10 H07 H09 H11

How to Order. Nozzle. Nil Connection size N02 N03 F02 F H06 H08 H10 H07 H09 H11 Blow Gun RoHS How to Order VMG W Blow gun Standard type Series Resin body lever type W BU Piping entry Bottom Top Body color White ark blue Symbol Nil 3 4 3 3 4 3 3 33 34 Male High efficiency Low noise

More information

For Pneumatic Piping/Fittings & Tubing Prior to Use

For Pneumatic Piping/Fittings & Tubing Prior to Use For Pneumatic Piping/Fittings & Tubing Prior to Use Fittings with Sealant Seal material (fluororesin) is coated on the thread part to the proper thickness and within the proper coating range, which reduces

More information

Added 100 mm and 150 mm lengths. Actuators 10% Air leakage 20% Air blow 70% Current model

Added 100 mm and 150 mm lengths. Actuators 10% Air leakage 20% Air blow 70% Current model Blow Gun Series 20% reduction in power consumption with the SMC Blow gun + S coupler + Coil tube 10% reduction with the Blow gun () only RoHS With cover Extension nozzle Added mm and 150 mm lengths Pressure

More information

Specifications. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette

Specifications. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette Finger Valve Series RoHS Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing O.D.

More information

Discrete direct acting 2 port solenoid valve (general purpose valve) AB31 AB41 Series NC (normally closed) type AB42 Series NO (normally open) type

Discrete direct acting 2 port solenoid valve (general purpose valve) AB31 AB41 Series NC (normally closed) type AB42 Series NO (normally open) type 31414 Series iscrete direct acting port solenoid valve (general purpose valve) 31 41 Series NC (normally closed) type 4 Series NO (normally open) type Port size: Rc1/8 to Rc1/ JIS symbol Common specifications

More information

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

Compact Guide Cylinder Series MGQ

Compact Guide Cylinder Series MGQ Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

NO (normally closed) type Common supply type (port C pressurization) MPa MPa MPa C C

NO (normally closed) type Common supply type (port C pressurization) MPa MPa MPa C C Direct acting port solenoid valve, manifold and actuator (general purpose valve) NO (normally closed) type Common supply type (port C pressurization) Manifold circuit structure Common specifications B

More information

Tube Applicable for nylon, soft nylon and polyurethane tubing.

Tube Applicable for nylon, soft nylon and polyurethane tubing. Miniature Fittings Series M pplicable Tubing: ø3.2, ø4, ø6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening

More information

Speed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model.

Speed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model. Speed Controller with Uni One-touch Fitting Push-lock type Series Elbow Universal Brass New-stand male threads for piping that reduces the screw-in time by 1/3. Gasket Female thread Rc, G NP, NPF Shape

More information

Air Suction Filter / In-line Type With One-touch Fittings. Model ZFC ZFC ZFC ZFC ZFC ZFC ZFC ZFC051-03

Air Suction Filter / In-line Type With One-touch Fittings. Model ZFC ZFC ZFC ZFC ZFC ZFC ZFC ZFC051-03 In-line type air suction filter is used to prevent vacuum equipment trouble from occurring due to dust in the air IN/OUT straight piping Easy installation and removal with one-touch fittings Light and

More information

Coolant Valve. Series VNC. Cylinder actuation by pilot air. Wide selection of port size and variations

Coolant Valve. Series VNC. Cylinder actuation by pilot air. Wide selection of port size and variations Coolant Valve ir Operated/xternal Pilot Solenoid Cylinder actuation by pilot air Wide selection of port and variations hreaded type (6 to ) type (3 to ) Low water hammer or details, refer to page 07. Large

More information

Discrete air operated 2 port valve (compact cylinder valve) NC (normally closed) type

Discrete air operated 2 port valve (compact cylinder valve) NC (normally closed) type N Series Discrete air operated port valve (compact cylinder valve) N* Series N (normally closed) type, NO (normally open) type, double acting type Port size: Rc/, Rc/ Working fluid: air, water, gas JIS

More information

Coolant Valve. Air Operated/External Pilot Solenoid

Coolant Valve. Air Operated/External Pilot Solenoid Coolant Valve ir Operated/xternal Pilot Solenoid Cylinder actuation by pilot air Wide selection of port and variations hreaded type (6 to ) lange type (3 to ) Low water hammer or details, refer to page

More information

Series 1-HK to 8-HK 34 SOCKETS (inches) Size Brass Steel Stainless Steel (female) Across (inch) Standard UL Listed Standard High Impulse NPTF

Series 1-HK to 8-HK 34 SOCKETS (inches) Size Brass Steel Stainless Steel (female) Across (inch) Standard UL Listed Standard High Impulse NPTF Series HK Series 1-HK to 8-HKP Series 10-HK, 1 & 20-HK Series HK Couplings are designed for general purpose hydraulic service. Some are suitable for use with various liquids, chemicals, steam, gases and

More information

NCB Quick connections. All industrial applications

NCB Quick connections. All industrial applications NCB Quick connections All industrial applications NCB, reliable and versatile connection Applications he NCB range with flush faces meets cleanliness requirements for industry. It is suitable for the production

More information

Specifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication. Semi-standard

Specifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication. Semi-standard Hand Valve Series Specifications 0 0 Fluid Proof pressure Max. operating 00/00/00 pressure 0 mbient temperature and operating fluid temperature Operating angle Lubrication ir.5 MPa.0 MPa MPa 5 to C (o

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR2 CRU2 CR1 MSU CRJ Rotation 360 type MSQ 360 MSZ MSQ MRQ Series Variations Page Rotating angle 80 to 0 170

More information

Pilot operated 2 port solenoid valve (general purpose valve) AP11/AP12 Series. Air, water, kerosene, oil (50 mm 2 /s or less) -10 to to 60 B

Pilot operated 2 port solenoid valve (general purpose valve) AP11/AP12 Series. Air, water, kerosene, oil (50 mm 2 /s or less) -10 to to 60 B Pilot operated port solenoid valve (general purpose valve) P/P Series NC (normally closed) type, NO (normally open) type Port size: Rc/4 to Rc Piston structure Refer to Ending 7 for more details. JIS symbol

More information

Speed Controller with One-touch Fitting

Speed Controller with One-touch Fitting Speed Controller with One-touch Fitting Series Elbow Type Reduces labor time! Elbow Brass Stainless steel Electroless nickel plated Stainless steel 33 RoHS TMH y Easo t e us Push-lock type Larger handle

More information

SUPPLY JOINTS CONTENTS

SUPPLY JOINTS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Specifications, Order Codes, Size Table 371 Dimensions 373 NCU Specification Order Codes, Model Table 379

More information

22mm Space required between the bottom of the cylinder body and your equipment is reduced.

22mm Space required between the bottom of the cylinder body and your equipment is reduced. Compact Guide Cylinder ø2,,, ø2,,, ø0, ø63,, ø0 With air cushion Water resistant cylinder are now available. New Up to 7% Weight reduced! New Weight reduced by up to 7% with a shorter guide rod and thinner

More information

Metric One-Touch Fittings

Metric One-Touch Fittings Metric One-ouch Fittings pplicable tube material pplicable tube O.D (mm) With Sealant SQH 1/ 1/ Soft 3/ olyurethane ф ф ф ф ф SQ 1/ 1/ Soft 3/ olyurethane SQ 1/ 1/ Soft 3/ olyurethane SQY 1/ 1/ Soft 3/

More information

General purpose direct acting 2, 3 port solenoid valve

General purpose direct acting 2, 3 port solenoid valve eneral purpose direct acting, 3 port solenoid valve (eneral purpose valve) eneral purpose Direct acting, 3 port solenoid valve / Pilot operated/pilot kick type port solenoid valve P/D/PK/DK Page 9 9 P/

More information

Port size. Part no. M5 x 0.8 R 1/8 R 1/4 R 1/4 R 3/8 R 1/ UNF NPT 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2. Specifications

Port size. Part no. M5 x 0.8 R 1/8 R 1/4 R 1/4 R 3/8 R 1/ UNF NPT 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2. Specifications Dual Speed Controller with One-touch Fitting Series D RoS Enables bi-directional flow control. Unrestricted 3 tube mounting direction. odel Part no. D23F-5 D33F-1 D43F-2 D53F-2 D53F-3 D3F-4 D23F-U/32 D33F-N1

More information

HN B G1/US B G2/US B G3

HN B G1/US B G2/US B G3 HN B G/US B G/US B G Compact direct acting, port solenoid valve air, water,, low vacuum (. x 0 Pa (abs)) CONTENTS Safety precautions port solenoid valve HNB NC (normally closed) type USB NC (normally closed)

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm 360 type 360 CR2 CRU2 CR1 MSU CRJ CR1 MSQ MSZ MSQ MRQ Series Variations Standard Made to Order Rotating angle

More information

Miniature Fittings Series M

Miniature Fittings Series M Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening

More information

13 msec (at 500 mm )/18.5 msec (at 1000 mm )

13 msec (at 500 mm )/18.5 msec (at 1000 mm ) Vacuum / Release Unit Series VQD1000-V Rubber Seal Response speed 13 msec (at 500 mm )/18.5 msec (at 1000 mm ) Distance from the unit to the work area [Option] Smooth detachment of a work piece without

More information

SLIDE TABLES CONTENTS

SLIDE TABLES CONTENTS CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG SLIDE TALES CONTENTS Features 979 Safety Precautions, Handling Instructions and Precautions 981 Specifications 985 Order Codes 986 Inner

More information

Compact Guide Cylinder

Compact Guide Cylinder Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

Instruction Manual. 35,000RPM Rotary Handpiece Model: PH3 35X # for. Introduction

Instruction Manual. 35,000RPM Rotary Handpiece Model: PH3 35X # for. Introduction Instruction Manual for 35,000PM otary Handpiece Model: PH3 35X #5103350 Introduction The Gesswein Power Hand 3 M-35X otary Handpiece is engineered and manufactured to a high degree of precision and will

More information

ASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 R 1/4 R 3/8 R 1/2 R 1/4 R 3/8 R 1/2 NPT 1/8 NPT 1/8 NPT 1/4

ASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 R 1/4 R 3/8 R 1/2 R 1/4 R 3/8 R 1/2 NPT 1/8 NPT 1/8 NPT 1/4 Pilot check valve and speed controller are combined. Realizes momentary intermediate stoppage of a cylinder and able to adjust speed control of it. Work piece Example of drop prevention circuit Tubing

More information

Manifold Regulator Modular Type. Regulator for manifold. Body size. Number of stations stations. 10 stations. Standard Specifications

Manifold Regulator Modular Type. Regulator for manifold. Body size. Number of stations stations. 10 stations. Standard Specifications Manifold Regulator Modular Type /3000 Series modular type that can be freely mounted on a manifold station. Optimal for central pressure control. Easily set up using the new knob. lso has a One-touch lock

More information

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping.

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping. Dual Rod Cylinder / Series ø,,,,, Dual rod cylinder with guide function suitable for pick & place applications. Ball bushing bearings and slide bearings are standard for all series. Dimensions for ball

More information

Related vacuum products

Related vacuum products Vacuum component C O N T E N T S variation 420 Position locking valve () 422 Compact vacuum regulator () 426 Vacuum break unit () 436 Vacuum filter large volume union type (VSFB) 440 Compact vacuum filter

More information

Vacuum / Release Unit

Vacuum / Release Unit Rubber Seal Vacuum / Release Unit Series VQD1000-V Response speed 13 msec (at 500 mm )/18.5 msec (at 1000 mm ) Distance from the unit to the work area Smooth detachment of a work piece without over-blow

More information

Steam Valve. Series VND. 2 Port Valve for Steam. With indicator (Option) By adopting of PTFE seal, the valve is suited for steam.

Steam Valve. Series VND. 2 Port Valve for Steam. With indicator (Option) By adopting of PTFE seal, the valve is suited for steam. Steam Valve Series VN Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable

More information

VNA VNB SGC SGH VNC VNH VND VCC

VNA VNB SGC SGH VNC VNH VND VCC Steam Valve VN Series Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable

More information

Pressure measurements can easily be taken any time, anywhere. POWER LIGHT

Pressure measurements can easily be taken any time, anywhere. POWER LIGHT Compact Manometer Pressure measurements can easily be taken any time, anywhere. RoHS Compact and lightweight Portable type with a lightweight of only about 00 g (unit 50 g, battery 50 g) can also be held

More information

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP CT.S-7 C Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series . Top mount Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Four mounting types

More information

Specifications Valve. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette

Specifications Valve. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette Finger Valve Series VHK ohs Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing

More information

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping.

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping. Dual Rod Cylinder J/ Series ø, ø, ø, ø, ø, Dual rod cylinder with guide function suitable for pick & place applications. Ball bushing bearings and slide bearings are standard for all series. Dimensions

More information

Compact / Lightweight 2 Port Solenoid Valve

Compact / Lightweight 2 Port Solenoid Valve ompact / Lightweight 2 Port Solenoid Valve /-XF For ir/water ompact / Lightweight resin body (PPS) Weight: 20 g (-XF) RoHS IP65 mm Power consumption 3 W (Standard) 0.5 W (With power-saving circuit) 48

More information

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations.

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Free Mount Cylinder Series CU A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Space-saving The multiple surface direct mounting with a square

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator CRQ2 Series Rack & Pinion Type/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR 2 CR1 MSU CRJ CR1 CRQ2 MSQ MSZ Rotation 360 type 360 CRQ2 MSQ MRQ Series Variations Page Rotating angle

More information

Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55

Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55 55 96Y 96K 96 P96K P96 75R 75K-S/T 75K 75-S/T 75W 75 85R 85K-S/T 85K 85-S/T 85W 85 ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Related ade to uto Products Order Switch ompact ylinder 55 Series ISO Standard

More information

Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve

Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective

More information

Compact Guide Cylinder Series MGP

Compact Guide Cylinder Series MGP Compact Guide Cylinder Series MGP ø2, ø, ø, ø, ø, ø, ø, ø,, ø0 MGJ MGP MGQ MGG MGC MGF MGZ MGT Series Variations Series Bearing type Cushion 2 0 Page Standard type MGP With air cushion MGP With end lock

More information

GENERAL PURPOSE VALVE AB31 AB41 AB42 SERIES Discrete valve. Direct acting poppet structure Port size : Rc1/8, Rc1/4, Rc3/8, Rc1/2.

GENERAL PURPOSE VALVE AB31 AB41 AB42 SERIES Discrete valve. Direct acting poppet structure Port size : Rc1/8, Rc1/4, Rc3/8, Rc1/2. Series port direct acting solenoid valve : Open when energized, close when energized NRL PURPOS VLV SRIS iscrete valve irect acting poppet structure Port size : Rc/, Rc/, Rc/, Rc/ JIS symbol / (normally

More information

2 way basic mounting: Through-hole or both ends tapped

2 way basic mounting: Through-hole or both ends tapped Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

CJ2-Z. Cushion. Rubber bumper (Standard) Air cushion

CJ2-Z. Cushion. Rubber bumper (Standard) Air cushion eries ow to Order 1/ /22 J2 ø1, ø ir ylinder Ro lean series 1 ushion Rubber bumper (tandard) ir cushion 1 J 2 L R M9W 21 J 2 L R M9W opper, fluorine and siliconefree + Low particle generation 21 22 Vacuum

More information

High Pressure Coolant Valve

High Pressure Coolant Valve High Pressure Coolant Valve Series.5 MPa, 7.0 MPa Corresponding to high speed grinding and long drilling processes Coolant valve for high pressure coolant liquid (up to.5 MPa or 7.0 MPa) that is ideal

More information

Compact Guide Cylinder

Compact Guide Cylinder Compact Guide Cylinder Series ø2, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Series standard type and series high precision ball bushing bearing type (except with end lock) products have been remodeled for a lightweight

More information

Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order

Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard

More information

2 way basic mounting: Through-hole or both ends tapped

2 way basic mounting: Through-hole or both ends tapped Compact Cylinder Series CQS ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility

More information

MAGNET TYPE RODLESS CYLINDERS SERIES CONTENTS

MAGNET TYPE RODLESS CYLINDERS SERIES CONTENTS CD drawing data catalog is available. CTUTORS GENERL CTLOG MGNET TYPE RODLESS CYLINDERS SERIES CONTENTS Features 59 MRC Series Specifications 6 Order Codes 6 Inner Construction, Major Parts and Materials

More information

AL20-A to AL40-A. How to Order. Description. Rc NPT G 1/8 1/4 3/8 1/2 3/4

AL20-A to AL40-A. How to Order. Description. Rc NPT G 1/8 1/4 3/8 1/2 3/4 ourtesy of /Flodyne/Hydradyne otion ontrol Hydraulic Pneumatic Electrical echanical (8) 426-8 www.cmafh.com IS Symbol w e r t Semi-standard L 3 3 hread type Port size Option (ounting) a b c d Lubricator

More information

Using a 4mm pin punch ( ) drive Trigger Pin 40 out and remove Trigger Assembly 39.

Using a 4mm pin punch ( ) drive Trigger Pin 40 out and remove Trigger Assembly 39. Servicing the Tool Rotary Valve Dismantling Using a mm pin punch (079000058) drive Trigger Pin 0 out and remove Trigger Assembly 39. Disconnect Hose Assembly 35 and remove Nut 3. Seperate Head Assembly

More information

Series VQZ1000/2000/3000 Single Unit

Series VQZ1000/2000/3000 Single Unit +- ase Mounted lug Lead Unit ort Solenoid Valve Series VQZ// Single Unit [Option] How to Order Valve Made to Order (For details, refer to page 7.) VQZ Series VQZ body width mm VQZ body width mm VQZ body

More information

AUTO ACE COUPLER(Steel)

AUTO ACE COUPLER(Steel) AUTO ACE COUPLER(Steel) Application - Used for piping of compressed air connections. - Used for air tool equipped with drive and impact Feature - One-touch joints - Uni-directional shut-off coupler with

More information

Stainless One-touch Fittings. Applicable Tubing Tube material Tube O.D. Thread Nut

Stainless One-touch Fittings. Applicable Tubing Tube material Tube O.D. Thread Nut Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release

More information

MHL2. Series 11- ø10, ø16, ø20, ø25. Parallel Type Wide Opening Air Gripper. How to Order. Model/Stroke. Clean series 11 Vacuum suction type

MHL2. Series 11- ø10, ø16, ø20, ø25. Parallel Type Wide Opening Air Gripper. How to Order. Model/Stroke. Clean series 11 Vacuum suction type eries ML2 ø, ø, ø, ø, ø, ø Parallel Type Wide pening ir ripper ow to rder lean series Vacuum suction type ML 2 22 ML 2 MN MN Wide opening Number of fingers 2 2 fingers ore size mm mm mm mm mm mm opper,

More information

Series CYP. ø15, ø32 Clean Rodless Cylinder. How to Order

Series CYP. ø15, ø32 Clean Rodless Cylinder. How to Order ø15, ø32 Clean odless Cylinder How to Order CYP 15 200 Y59 Clean rodless cylinder Cylinder bore size 15 15 mm 32 32 mm Standard stroke ore size (mm) Standard stroke (mm) 100, 150, 200, 250, 300, 350 15/32

More information

HVB/HVL. Solenoid valve for high vacuum. For vacuum, inert gas, air, nitrogen CONTENTS. Overview

HVB/HVL. Solenoid valve for high vacuum. For vacuum, inert gas, air, nitrogen CONTENTS. Overview HV/HVL For vacuum, inert gas, air, nitrogen HN/G US/G F/G Overview dvanced technology, such as stability in the leak amount (vacuum holding force) and increased seal life, is required when the degree of

More information

1/8" One Way Shut-Off 2 Series

1/8 One Way Shut-Off 2 Series 1/8" One Way Shut-Off 2 Series S S FE 1/8 FPT 23-2 2302 1/4 FPT 27-2 2702 1/8 MPT 22-2 2202 1/4 MPT 24-2 2402 1/8 I.D. 02-2 2022 3/16 I.D. 03-2 2032 1/4 I.D. 04-2 2042 SELF STORING AIR HOSE 1/4 I.D. 1502

More information

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types ir Cylinder Ø 6, Ø 1, Ø New RoS Double foot ead flange Double-side bossed added to the mounting types. 4 types 7 types New or Ø 6, 3 types are 6 types Double foot Double-side bossed ead flange ead cover

More information

Air Suction Filter. Series ZF. Prevent from occurring vacuum equipment trouble due to dust from vacuum pad ZFA ZFB ZFC

Air Suction Filter. Series ZF. Prevent from occurring vacuum equipment trouble due to dust from vacuum pad ZFA ZFB ZFC Air Suction Filter Series ZF Prevent from occurring vacuum equipment trouble due to dust from vacuum pad Series ZFA ZF Universal joint type Features Long maintenance cycle type (Large filter surface) Adaptable

More information

CJ2. Cushion. Rubber bumper (Standard) Air cushion (except ø6) Cylinder stroke (mm) Built-in magnet Nil. Action. Double acting Single rod +1.

CJ2. Cushion. Rubber bumper (Standard) Air cushion (except ø6) Cylinder stroke (mm) Built-in magnet Nil. Action. Double acting Single rod +1. eries -/- / CJ2 ir cylinder / ø, ø, ø ow to Order Clean eries Vacuum suction type Cushion Rubber bumper (tandard) ir cushion (except ø) - C D J 2 L - R 7B 21 - C D J 2 L - R 7B Copper, fluorine and silicon-

More information

Tube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications

Tube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening

More information

Products Recommended for Steam Service

Products Recommended for Steam Service oss ouplings Products Recommended for Steam Service Quick isconnect ittings ~ actory nly Quick disconnect fittings (socket and plug) are available in solid brass with stainless steel springs and locking

More information

Compact Proportional Solenoid Valve

Compact Proportional Solenoid Valve Compact Proportional Solenoid Valve Series Repeatability: % or less Hysteresis:1% or less Fluid Flow rate control range Note) Series Air, Inert gas to L/min to L/min Note) Varies depending on the model.

More information

HK Series - 2 Way 1HK to 8 HK 1 8" to 1" Body

HK Series - 2 Way 1HK to 8 HK 1 8 to 1 Body HK Series - 2 Way 1HK to 8 HK 1 8" to 1" Body Series HK Couplings are designed for general purpose hydraulic service. Some are suitable for use with various liquids, chemicals, steam, gases, and vacuum.

More information