Brazed heat exchanger XB

Size: px
Start display at page:

Download "Brazed heat exchanger XB"

Transcription

1 Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the network from house instlltion or s pressure rekers. The rnge consist of numerous individul plte sizes of which severl cn e delivered with different corrugtion depth or pttern, thus ensuring tht the optiml het exchnger cn e selected for ll pplictions. Approvls: CE certificte ccording (PED) 97/23/EC GOST/Russi SVGW/Switzerlnd VA/Denmrk Min dt: Min. temperture 10 C Mx. temperture +180 C Mx. working pressure 25 r Flow medi DH: Circultion wter / glycolic wter up to 50 % DC: ethylene, propyleneglycolic wter, ethnolwter solutions nd other suitle het trnsfer medi. (Plese contct your Dnfoss representtive). Connection size DN (threded or flnged) DENSMT/SI VD.KA.E9.02 Dnfoss 06/2014 1

2 Ordering Explntion, XB type XB 10L 1 10 Plte types Severl of the het exchngers cn e delivered in three different sic corrugtions: H M L mking them optiml for different pplictions. Plese see the chrcteristics elow. H types M type Ltype Chnnel Smll Medium Mix of H/L Lrge Angle if chevron pttern Otuse Acute Het trnsfer Pressure drop Reltively high Reltively high Numer of pltes Pss of the het exchnger 1 = 1pss 2 = 2pss Plte type Plte size B = Brzed het exchnger Medium Medium Reltively low Reltively low Micro Plte Het Exchnger (MPHE) principle: Trditionlly the different versions hve een creted y using different ngles in the chevron pttern of the het exchnger pltes. However new nd more efficient het trnsfer ptterns hve een developed. Chrcteristic for the pttern is tht the corrugtion consists of dimples in different size nd shpe, creting Micro Plte het exchngers. Micro Plte het exchngers offers sme het trnsfer with lower weight, size nd pressure drop. Besides etter het trnsfer Micro Plte het exchngers offers higher mechnicl strength. The het exchnger cn consist of pltes type L or pltes type H. The H type plte hs lrger herring one ngle thn the L type plte. H type plte fits etter for certin tempertures thn L type. H type het exchngers hve etter heting cpcity, ut they lso hve higher pressure loss. The plte set cn lso e comintion of these two types. If every other plte is Htype plte nd every other plte is Ltype plte, the comintion is clled type M. L type H type Micro Plte 1pss rzed het exchngers type XB Type XB041 XB101 XB201 XB241 XB 301 Connec tion Thred G ¾ A Thred G 1 A Thred G 1 A Thred G ¾ A Thred G 1 A No of pltes, n Code No B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B VD.KA.E9.02 Dnfoss 06/2014 DENSMT/SI

3 Ordering (continued) 1pss rzed het exchngers type XB Type XB51H1 XB51L1 * XB51H1 SB * XB51H1 SB * XB51L1 SB * XB51L1 SB XB70L1 2) XB70M1 2) XB70H1 2) Connection Thred Thred Thred Flnge Thred Flnge Flnge Flnge Flnge G2A G 2 A G 2 A DN 50 G 2 A DN 50 DN 65/100 DN 65/100 DN 65/100 No of pltes, n Code No B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B2023 primry side (PN 25) / secondry side (PN 16) 2) delivered with mounting rckets ex fctory * Specil versions; SB: This version includes 6 supporting olts M12x Specil versions Specil versions for different mediums, connections/couplings, mx. operting pressures, mterils nd cpcities re ville on request. Plese contct the locl sles representtive for detils SB version: Supporting olts in the front. DENSMT/SI VD.KA.E9.02 Dnfoss 06/2014 3

4 Ordering (continued) 2pss rzed het exchngers type XB Type XB042 XB102 XB202 XB302 XB51H2 XB51L2 Connection Thred G ¾ A Thred G 1 A Thred G 1 A Thred G 1 A Thred G 2 A Thred G 2 A No of pltes, n Code No. 10/10 004B B /16 004B B /20 004B B B B B B /26 004B B B B B B /30 004B B B B B B /36 004B B B B B B /40 004B B B B B B /46 004B B B B B B /50 004B B B B B B /56 004B B B B B /60 004B B B B B B /66 004B B /70 004B B1300 fterheting/preheting Accessories: Tilpieces Description Suitle for Connection Code No. Solder XB04, XB24 XB10, XB20 XB30 XB51 G ¾ A / 15 mm G ¾ A / 18 mm G 1 A / 15 mm G 1 A / 18 mm G 1 A / 22 mm G 2 A / 28 mm G 2 A / 35 mm G 2 A / 42 mm 004B B B B B B B B2912 XB04, XB24 G ¾ A / DN B2944 Weldon Threded XB10, XB20 XB30 XB51 XB04, XB24 XB10, XB20 XB30 G 1 A / DN 15 G 1 A / DN 20 G 1 A / DN 25 G 2 A / DN 32 G 2 A / DN 40 G 2 A / DN 50 G ¾ A / G ¾ A G ¾ A / G 1 A G 1 A / G ¾ A 004B H B B B B B B B2913 One set contins 2 with union nuts nd gskets 4 VD.KA.E9.02 Dnfoss 06/2014 DENSMT/SI

5 Ordering (continued) Accessories: Mounting rckets for rzed het exchnger type XB Suitle for Code No. XB04, XB24 004B2948 XB10, XB20, XB30 004B2919 XB51 004B2923 XB70 004B2925 XB04, 24 XB10, 20, 30 XB51 XB51SB, 3060 pltes 004B1788 XB51SB, pltes 004B1789 XB51SB, pltes 004B1790 XB70 XB51SB The rckets re delivered with XB70, they will thus e needed only for service or specil purposes. Accessories: Insultion for 1pss rzed het exchngers type XB Type XB101 XB201 XB301 XB511 XB701 No of pltes B B B B B B B B B B B B B B B B B B B DENSMT/SI VD.KA.E9.02 Dnfoss 06/2014 5

6 Ordering (continued) Accessories: Insultion for 2pss rzed het exchngers type XB Type XB102 XB202 XB302 XB512 No of pltes Code No. 10/10 16/16 20/20 26/26 004B /30 36/36 40/40 46/46 50/50 004B B B B B B B B /56 004B B /60 66/66 70/70 fterheting/preheting Accessories: Insultion properties Type 004B B3735 PU (Polyurethne) see pge 12 for XB51 Coted steel sheet nd polyester insultion, see pge 12 for XB70 Het conductivity, λ W/mK 0,035 0,042 Mx temperture Permnent C Short term pek Wll thickness mm VD.KA.E9.02 Dnfoss 06/2014 DENSMT/SI

7 Technicl dt 1pss rzed het exchngers type XB Type XB041 XB101 XB201 XB241 XB301 XB51L1 XB51H1 XB70L1 XB70M1 XB70H1 Mx. working pressure (r) 25 (16) 25(16) /16 3) Min. / Mx. temperture 2) ( C) 10/180 DH: Circultion wter / glycolic wter up to 50% Flow medium DC: ethylene, propyleneglycolic wter, ethnolwter solutions nd other suitle het trnsfer medi. (Plese contct your Dnfoss representtive). Volume/chnnel (litres) 0,060 0,050 0,060 0,100 0,075 0,210 0,55/0,70 3) Connection type Cylindricl externl thred cc. to DIN ISO 228/1 Flnge, DN Connection size G ¾ A G 1 A G ¾ A G 1 A G 2 A 65 4) 5) 3) /100 Plte mteril Stinless steel, EN (AISI 316L) Brzing mteril Copper 16 r versions re ville on enquiry (ll types except XB 041, 24. XB 701 secondry side: mx. working pressure 16 r 2) At flow tempertures elow 2 C glycolic wter must e used 3) Primry side / secondry side 4) Flnges PN 25 cc. to EN 1092, fcing type B (B 5) Flnges PN 16 cc. to EN 1092, fcing type B (B 2pss rzed het exchngers type XB Type XB042 XB102 XB202 XB302 XB51L2, XB51H2 Mx. working pressure (r) 25 (16) Mx. operting temp. ( C) 180 Min. operting temp. 2) ( C) 10 Flow medium Circultion wter / glycolic wter up to 50% Volume/chnnel (litres) 0,060 0,050 0,060 0,075 0,210 Connection type Cylindricl externl thred cc. to DIN ISO 228/1 Connection size G ¾ A G 1 A G 2 A Plte mteril Stinless steel, mt. no Brzing mteril Copper 16 r versions re ville on enquiry (ll types except XB 042). 2) At flow tempertures elow 2 C glycolic wter must e used To void corrosion nd lekge in the copper rzed plte het exchngers plese oserve Dnfoss recommendtions for the wter qulity in the guideline on (Documenttion). For the stndrd rnge of het exchngers mteril (316L) hs een selected to chieve: good delivery service good lnce etween low price nd voiding corrosion in the most common pplictions offers etter corrosion properties thn e.g ut is more expensive. Attention must lwys e pid to the wter condition when selecting mteril for het exchnger. The het exchngers cn e delivered in other mterils on request. DENSMT/SI VD.KA.E9.02 Dnfoss 06/2014 7

8 Design nd function T11 Primry side in T12 Primry side out T112 Primry side second inlet (2pss) T21 Secondry side in T22 Secondry side out T212 Secondry side second inlet (2 pss) The het exchngers re mde of shpepressed nd rzed het exchnge pltes, etween which the flow chnnels re creted. The hevy turulence nd counterflow principle enle efficient het trnsfer. The tsk of the het exchnger is to trnsfer het from the primry to secondry flow through het trnsfer plte thus preventing the flows from mixing with ech other. The 2pss het exchnger should e chosen for domestic hot wter. The 2pss het exchnger will often cool the district heting wter to elow 25 C. This cpcity cn e chieved y using lrger temperture difference, smller wter flow nd het exchnger with n optimum het trnsfer re. This will ffect the choice of motorized control vlve, for instnce. The choice of het exchnger is determined y the desired het output, required tempertures nd the permitted pressure losses. Sizing nd selection Dimensioning nd selection of het exchngers should e crried out with the support of the Dnfoss dimensioning progrm for het exchngers. Mounting It is recommended to mount het exchngers on their se in verticl position. This will ssure the est venting nd the lest fouling. It is recommended tht ll pipes connected to the het exchnger re equipped with shutoff vlves for mintennce purposes. The pipes to e connected must e mounted so tht the strin cused y the therml expnsion, for instnce, does not hrm the het exchnger. The pipes must e equipped with rckets to prevent ny torsionl stress concentrtion t the het exchnger s pipe connections. It is recommended tht the het exchnger is equipped with insultion. Use sfety vlve etween het exchnger nd shut off vlve on the secondry side to void reking of the het exchnger due to therml expnsion of liquid. 8 VD.KA.E9.02 Dnfoss 06/2014 DENSMT/SI

9 Dimensions E F E F A C B D XB E F E F C B A C B A C1 A1 D C2 D XB 51 SB XB 70 C3 Type Connection A/A1 B Externl dimensions [mm] C/C1 C2/C3 D E F Weight empty [kg] XB041 G ¾ A ,25 n 20 0,9 + n 0,085 XB042 G ¾ A ,25 n 20 1,13 + n 0,085 XB10 G 1 A ,6 n 50 1,5 + n 0,12 XB20 G 1 A ,6 n 50 1,7 + n 0,12 XB24 G ¾ A ,25 n 20 1,4 + n 0,15 XB30 G 1 A ,6 n 50 2,13 + n 0,18 XB51L XB51H G 2 A ,6 n n 0,38 XB51 SB 5) XB51 SB 6) DN 50 2) ,6 n 90 18,8 + n 0,38 XB70L XB70M XB70H DN 65 2) / 100 3) 4) 990/ / /203 n = numer of pltes (for 2pss het exchngers the sum of fterheting nd preheting pltes) Cylindricl externl thred cc, to DIN ISO 228/1 2) Flnges PN 25 cc, to EN 1092, fcing type B (B 3) Primry side / secondry side 4) Flnges PN 16 cc, to EN 1092, fcing type B (B 5) For numer of pltes n < 60 6) For numer of pltes n ,7 n n 1,50 DENSMT/SI VD.KA.E9.02 Dnfoss 06/2014 9

10 Dimensions (continued) Mounting rckets Ø8, Ø9 80 Ø XB04, 24 rcket XB10, 20, 30 rcket Ø XB51 rcket XB70 rcket VD.KA.E9.02 Dnfoss 06/2014 DENSMT/SI

11 Dimensions (continued) Mounting rckets A=110 B=199 C= A= 3060 pltes B= pltes C= pltes XB51SB solder weldon solder solder threded weldon weldon threded threded Tilpieces SW Description Connection Code No. mm G ¾ A / 15 mm 004B Union nut, width cross flts G ¾ A / 18 mm 004B G 1 A / 15 mm 004B Solder G 1 A / 18 mm 004B G 1 A / 22 mm 004B , G 2 A / 28 mm 004B G 2 A / 35 mm 004B G 2 A / 42 mm 004B G ¾ A / DN B , G 1 A / DN B , G 1 A / DN H ,5 41 Weldon G 1 A / DN B , G 2 A / DN B , G 2 A / DN B , G 2 A / DN B G ¾ A / G ¾ A 004B2947 3/ G ¾ A / G 1 A 004B Threded G 1 A / G ¾ A 004B2913 3/ Flnges Type DN L1 k d 2 PN n mm (r) XB51... SB XB70 65/ / / 16 Primry side/secondry side d₂ d₂ k Type DN L1 k n d2 PN XB50 G XB XB70 prim XB70 sec n L1 DENSMT/SI VD.KA.E9.02 Dnfoss 06/

12 Dimensions (continued) Insultion progrm (polyurethne) for rzed het exchngers type XB A A E B XB10, 20, 30, 51 E B XB70 Insultion dimensions for 1pss rzed het exchngers type XB Type XB101 XB201 XB301 XB511 XB701 No of pltes B1113 A= B B B=176 A=385 A= E=137 B=176 B= B1924 E=137 E= B= B B B1524 E=197 A=336 A=385 A= B=184 B=184 B= E=197 E=197 E= B A=336 B= E= B1335 A=385 B=185 E= B1535 A=494 B=185 E= B1935 B=320 E= B2535 A=1202 B=445 E= B B B A=487 A=1202 B=200 B=330 B= E=337 E=337 E= B B= B2570 E=392 A= B3735 B= E=448 B=346 E= B A=1202 B= E=610 Insultions set of PU type for XB70 cn e delivered on request. Plese contct the locl sles representtive for detils. Insultion dimensions for 2pss rzed het exchngers type XB Type No of pltes mm 10/10 16/16 20/20 004B B /26 A=336 A=494 B=185 B=185 30/30 E=257 E= B B3120 A=494 36/36 A=336 B=185 B=188 E=257 E=282 40/40 004B3325 A=385 46/46 004B3125 A=336 B=200 B=200 E=337 50/50 E= B3130 A=336 B= B3525 A=487 B=200 E=337 56/56 004B3330 A=385 60/60 B=207 E=392 E=392 66/66 70/70 fterheting/preheting 004B3720 B=320 E= B3725 B=330 E= B3730 B=340 E= B3735 B=346 E= VD.KA.E9.02 Produced y Dnfoss A/S 06/2014

FINGER STRIPS. and other EMI shielding products. Characteristics

FINGER STRIPS. and other EMI shielding products. Characteristics BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used

More information

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03 2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted

More information

4/2- and 4/3-way shut-off valve

4/2- and 4/3-way shut-off valve Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure

More information

SSAB Water mains PIPES AND FITTINGS

SSAB Water mains PIPES AND FITTINGS SSAB Wter mins PIPES AND FITTINGS Pipes nd fittings mnufctured y SSAB re used primrily with wter pipeline sizes DN 400-1200. The fittings re mde of steel pressure pipes (ex works delivery) nd cn e coted

More information

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03 2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge

More information

Transmission and Driveline. Section 2A - Transmission and Driveline

Transmission and Driveline. Section 2A - Transmission and Driveline Trnsmission nd Driveline Trnsmission nd Driveline Tle of Contents Section 2A - Trnsmission nd Driveline 2 A Generl Informtion...2A-2 Ger Rtio Selection...2A-2 Engine nd Propeller Shft Instlltion Angle...2A-2

More information

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN

More information

2/2 Solenoid Operated Seat Valve, ISO Size 03

2/2 Solenoid Operated Seat Valve, ISO Size 03 2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt

More information

2/2 Solenoid Operated Seat Valve, ISO Size 03

2/2 Solenoid Operated Seat Valve, ISO Size 03 2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,

More information

Georg Fischer Waga N.V. Your mechanical connection for plastic pipes restraint - non restraint d63 - d315. Products. Plast/Joint

Georg Fischer Waga N.V. Your mechanical connection for plastic pipes restraint - non restraint d63 - d315. Products. Plast/Joint Georg Fischer Wg N.V. Your mechnicl connection for plstic pipes restrint - non restrint - Proucts Plst/Joint Plst/Joint >> Your mechnicl restrint connection for plstic pipes >> With the increse use of

More information

MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts

MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl

More information

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6 4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used

More information

Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL

Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic

More information

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4 Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt

More information

Product range MEGAlife

Product range MEGAlife Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.

More information

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see Technical data) Delivery ddress: Mckenrodtstrße 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Phone: +9 66 6003-0 Fx: +9 66 6003-607 E-mil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex CM0 DY, UK Phone: + 79 635533

More information

MPC COBRA SERIES. Manually Programmable Cylindrical Lock D

MPC COBRA SERIES. Manually Programmable Cylindrical Lock D 51120-D MPC COBRA SERIES Mnully Progrmmle Cylindricl Lock 575 Birch Street Forestville, CT 06010 technicl support: 866-322-1237 fx: 866-322-1233 http://www.irsupport.net 57010-H 12-19-2005 Introduction

More information

VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents

VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx

More information

4/2 and 4/3 Solenoid Directional Valve, ISO Size 03

4/2 and 4/3 Solenoid Directional Valve, ISO Size 03 4/ nd 4/3 Solenoid Directionl Vlve, ISO Size 03 Q mx = 60 l/min, p mx = 315 r wo-stge design, with EX-sfty solenoid coil Vlve: High switching relilility thnks to two-stge follower spool design Slip-on

More information

HEATING BLANKETS FOR GENERAL COMPOSITE REPAIR

HEATING BLANKETS FOR GENERAL COMPOSITE REPAIR Innovtion in Technology for Aircrft Mintennce Equipment, Airline Support through Engineering & Trining Advnced Composite & Metllic Structures Cge Code - NATO Code : F7856 - Eur VAT- ID: FR90 328961073

More information

Spark Plug Fouling 3.0 Liter OptiMax

Spark Plug Fouling 3.0 Liter OptiMax WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected

More information

Application Examples of Air-piloted Valves

Application Examples of Air-piloted Valves ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht

More information

Boiler room components 0861EN April 2017 Distribution and regulation units

Boiler room components 0861EN April 2017 Distribution and regulation units oiler room components 8EN pril Distriution nd regultion units R8R R8RY R8RY R8RY R8RY Unit with insultion nd ctutor (optionl) R8RY R8RY R8RY R8RY Description R8R distriution units control heting nd cooling

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte

More information

Harmer Roof Drainage The Cast Iron Range

Harmer Roof Drainage The Cast Iron Range Cst Iron Roof Outlets - Introduction Hrmer Roof Dringe The Cst Iron Rnge The high qulity Cst Iron Roof Outlet rnge, feturing medium sump nd lrge sump odies, two-wy outlets nd n extensive rnge of lodering

More information

Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)

Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1) Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if

More information

ELECTRICAL SYSTEM 4 D INSTRUMENTATION

ELECTRICAL SYSTEM 4 D INSTRUMENTATION ELECTRICAL SYSTEM 4 D 72747 INSTRUMENTATION Tle of Contents Pge Identifiction............................. 4D-1 Specil Informtion....................... 4D-1 Lighting Options....................... 4D-1

More information

Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)

Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series) Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type

More information

TopWing - Air heater TLHD

TopWing - Air heater TLHD TopWing - Air heter TLHD 1 TopWing Air heter TLHD The TLHD unit is extremely quiet nd in comintion with the continuous speed control, the TopWing concentrtes on the essentil while reducing noise. The ir

More information

Welcome Home W W W. G O M A Y N E. C O M

Welcome Home W W W. G O M A Y N E. C O M Welcome Home W W W. G O M A Y N E. C O M Myne hs revolutionized outdoor decor with eutiful collection of Plnters, Window Boxes, Mil Posts, Address Signs, nd Storge Bins. Our polyethylene nd vinyl products

More information

Aluminium Floor Outlets - Trapped Outlets

Aluminium Floor Outlets - Trapped Outlets Aluminium Floor Outlets - Trpped Outlets Verticl Trpped Outlet Components Drin Body Dimensions 260 Grte* Funnel Sel Trp Assemly Funnel Cup * Elevtion Throt Throt Sel DPM Clmp Ring with Weep Bung (shown

More information

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique

More information

DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES

DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15 DISPLAY OR 19 DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl

More information

JUMO MIDAS S05 OEM pressure transmitter - universal

JUMO MIDAS S05 OEM pressure transmitter - universal Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:

More information

p max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60

p max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60 4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl

More information

GASTRONORM 1/1, 2/1 & EURONORM 1/1 ISOTHERMAL TROLLEYS TO SECURE YOUR LOGISTICS

GASTRONORM 1/1, 2/1 & EURONORM 1/1 ISOTHERMAL TROLLEYS TO SECURE YOUR LOGISTICS ZOOM Cpcities nd configurtions to meet ll your needs GSTRONORM 1/1, 2/1 & EURONORM 1/1 ISOTERML TROLLEYS TO SECURE YOUR LOGISTICS Refrigerted SERVITERM GSTRONORM 1/1 - ville wit nd 14 levels MODELS LEVELS

More information

Proportional pressure reducing valve type 3WZCDE6 is a

Proportional pressure reducing valve type 3WZCDE6 is a LICION roportionl pressure reducing vlve type 3WZCDE6 3-wy electriclly controlled, proportionl pressure reducing vlve type 3WZCDE6 is used for reducing pressure in hydrulic system, in continuous wy, s

More information

Press control block PSB Type approved according to DIN EN 693

Press control block PSB Type approved according to DIN EN 693 Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording

More information

POWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24

POWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24 POWERHEAD Section 4A - Cylinder Hed CYLINDER HEAD Tle of Contents Specifictions........................... 4A-2 Specil Tools........................... 4A-4 Cylinder Hed.......................... 4A-6

More information

PREFILL AND EXHAUST VALVE PV 100 TO PV 200

PREFILL AND EXHAUST VALVE PV 100 TO PV 200 PREFILL ND EHUST VLVE Ref. No. Relese 08/2006 1 Description Set type construction. llows free flow from it's port to port. Flow from port to port cn e hd y pplying pilot pressure to it's port. The decompression

More information

SEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS

SEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH

More information

Electrically controlled directional control poppet valve type UREZ6

Electrically controlled directional control poppet valve type UREZ6 LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion

More information

3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation

3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation 3/3, 4/2 nd 4/3 directionl poppet vlve with solenoid ctution RE 22035/06.10 Replces: 12.08 1/16 Type SEC Size 6 Component series 1X Mximum operting pressure 420 r [6100 psi] Mximum flow 25 l/min [6.6 US

More information

* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION

* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15 DISPLAY OR 19 DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19 DISPLAY FRONT ELEVATION R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE

More information

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,

More information

Data Sheet T /4/5/6 EN

Data Sheet T /4/5/6 EN Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves

More information

DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION

DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2) UL SAFE - 15 OR 19 DISPLAY THROUGH THE WALL 330mm (13) PLAN VIEW FRONT ELEVATION SECTION L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE

More information

INSTALLATION GUIDE INSTALLATION GUIDE

INSTALLATION GUIDE INSTALLATION GUIDE INSTALLATION GUIDE INSTALLATION GUIDE CONTACT US By selecting Hiku fn, you ve chosen qulity design, heightened comfort nd effortless conservtion. Use this guide to sfely instll your fn. Plese contct us

More information

Directional Valve Size 06 WL 4.06

Directional Valve Size 06 WL 4.06 Directionl Vlve Size 06 WL 4.06 Instlltion dimensions ISO 4401/DIN 24340 6 Directionl vlve size 06 instlltion dimensions ISO 4401 / DIN 24340 6 Functionl Description he directionl control vlves WL 4/06

More information

FUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally)

FUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally) FUEL SYSTEM Section 3A Pulse Crnkcse Driven Fuel Pump Tle of Contents Specifictions................................ 3A-1 Specil Tools................................ 3A-1 Fuel Pump..................................

More information

Cable Trolleys for C-Rails Program

Cable Trolleys for C-Rails Program Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble

More information

2/2, 3/2 and 4/2 directional seat valve with mechanical, manual or fluidic operation

2/2, 3/2 and 4/2 directional seat valve with mechanical, manual or fluidic operation /, / nd / directionl set vlve with mechnicl, mnul or fluidic opertion RE 0/10.06 /1 ype M-.S.. Sizes 6 nd 10 Component series X Mximum operting pressure 0/ r Mximum flow 0 l/min H701+70+70 le of contents

More information

SMP-BC Mixproof Valve

SMP-BC Mixproof Valve . kythe Proven Mixproof Rnge SMP-BC Mixproof Vlve Concept SMP-BC is snitry pneumtic set vlve, designed for sfety nd lek detection when two different products flow through only one vlve. The vlve is often

More information

UBAN Series. Direct operated pressure reducing valve. Suitable for: Air & process gases. Liquids. Steam. Markets: Oil & gas. Blanketing systems

UBAN Series. Direct operated pressure reducing valve. Suitable for: Air & process gases. Liquids. Steam. Markets: Oil & gas. Blanketing systems UBAN Series Direct operted pressure reducing vlve Suitble for: Air & process gses Liquids Stem Mrkets: Oil & gs Blnketing systems Generl industry Power CC0032E - Rev. 1 14/01/2010 UB REGULATORS UBAN Series:

More information

GUARDIAN VERTICAL MOUNTING

GUARDIAN VERTICAL MOUNTING GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with

More information

WATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL

WATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL

More information

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15

330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15 L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE

More information

BIMETAL-POINTER-THERMOMETER

BIMETAL-POINTER-THERMOMETER BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.

More information

4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:

4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces: 4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4

More information

Specifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits

Specifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits PowerMte Fetures nd Benefits Type P Cle Lockout Complint Specifile Fetures Lockout Plug Sfety Insultor Dimond Clmp Split Pin Contcts Type P Cle Comptile with ll UL 686 listed plugs nd receptcles. 2 3 4

More information

Directional spool valves, pilot-operated, with hydraulic or electro-hydraulic actuation

Directional spool valves, pilot-operated, with hydraulic or electro-hydraulic actuation Directionl spool vlves, pilot-operted, with hydrulic or electro-hydrulic ctution WEH nd WH RE 24751 Edition: 2016-06 Replces: 08.08 Size 10 32 Component series 4; 6; 7 Mximum operting pressure 350r [5076psi]

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize

More information

CCD-493 KIT SERIES INSTRUCTION SHEET

CCD-493 KIT SERIES INSTRUCTION SHEET (COMPLETE CCD-493-W KIT ILLUSTRTED. CUT-OUTS IN TRCK TO EXPOSE COMPONENTS) CCD-493 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING S. CN BE INSTLLED

More information

POWERCIAT LX R407C. Air cooled chillers USE RANGE

POWERCIAT LX R407C. Air cooled chillers USE RANGE Screw compressors CIAT direct expnsion shell nd tues evportor Hydrulic pck versions Plug nd Cool H.P.S. equipment (High Power System) Cooling cpcity : 230 to 1100 kw Cooling Hydrulic module Het recovery

More information

Directional seat valves, direct operated, with solenoid actuation. Type SEW. Contents. Features. RE Edition: Replaces: 07.

Directional seat valves, direct operated, with solenoid actuation. Type SEW. Contents. Features. RE Edition: Replaces: 07. Directionl set vlves, direct operted, with solenoid ctution ype SEW RE 22058 Edition: 2013-06 Replces: 07.09 Size 6 Component series 3X Mximum operting pressure r 9150 psi] Mximum flow 25 l/min [6.6 gpm]

More information

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1. Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description

More information

6/2 way directional valve type 6/2UREM6 and 6/2URMM6

6/2 way directional valve type 6/2UREM6 and 6/2URMM6 6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS 6 dm 3 up to 35 MP up to 5 /min DT SHEET - SERVICE MNU NUL WK 421 54 11.212 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...

More information

Y03002/ Prefill Exhaust Valve. Description

Y03002/ Prefill Exhaust Valve. Description Prefill Exhust Vlve 350 r /6 Description The Prefill Exhust Vlve (PV) is hydrulic-pilot operted check vlve with set type construction. It llows free flow from port A to port B. Flow from port B to port

More information

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273 Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd

More information

Solenoid operated spool valve with soft switching NG10 ISO

Solenoid operated spool valve with soft switching NG10 ISO WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool

More information

Control stations and enclosures Control station enclosures : insulated, metal and flush mounting

Control stations and enclosures Control station enclosures : insulated, metal and flush mounting Chrcteristics Control sttions nd enclosures Control sttion enclosures : insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil

More information

CC-410 KIT SERIES INSTRUCTION SHEET

CC-410 KIT SERIES INSTRUCTION SHEET (COMPLETE CC-410-W KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CC-410 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMG OF SLIDING DOORS. CN

More information

SINEAX C 402 Alarm unit

SINEAX C 402 Alarm unit for DC currents or DC voltges 00 II () G Appliction The lrm unit SINEAX C40 (Figure ) is normlly pplied to monitor the limits of oth current nd voltge mesurements. The sttus of the device is signlled remotely

More information

RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.

RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8. Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis

More information

POWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch

POWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch POWER COMBICON Plugs nd Heders PC 6/ for Currents up to 41 A, The PC 6 plug connector fetures highly conductive metl lloys to offer current crrying cpcity of 41 A t rted voltge of 1000 V. A double steel

More information

VARIFLUX IFS 6000 Electromagnetic Flowmeter

VARIFLUX IFS 6000 Electromagnetic Flowmeter KROHNE 04/2001 D 31 VR60 02 E GR/PRINTO IFS 6000 Electromgnetic Flowmeter for snitry nd septic pplictions For mny different ppliction fields with mny different types of process connections For mesurement

More information

MNPV6 REV A DISCO 4X FINAL ASSY

MNPV6 REV A DISCO 4X FINAL ASSY NOTES 1) ITEM 2,USR, MUST HVE TWO END SCREWS REMOVED, SO THT ITEM, WHITE INSULTORS, CN E INSTLLED. 2) UNIT SHIPS WITH THE FOLLWING ECH LCK TWO WIRE STRIN RELIEFS, P/N 9--1 ECH LCK STRIN RELIEF NUTS, P/N

More information

Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)

Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL) elivery ddress: Mckenrodtstrße 14 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Fx: +49 661 6003-607 Emil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: +44 1279 62 50 29 Emil: sles@jumo.co.uk

More information

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2 Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.

More information

TECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS

TECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS TECHNICAL INSIGHT PRODUCT AND APPLICATION ENGINEERING INFORMATION A PUBLICATION OF NSK AMERICAS INTERNAL CLEARANCE - TYPES AND NORMS Internl clernce is the distnce which the two rings of non-instlled bering

More information

HOOK UP LAYOUT FOR HEAT GENERATION AND FUEL TANK SYSTEM

HOOK UP LAYOUT FOR HEAT GENERATION AND FUEL TANK SYSTEM HOOK UP LYOUT FOR HET GENERTION ND FUEL TNK SYSTEM DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-018 SHT 1 "(DN0) FILL FUEL OIL

More information

2 Way Slip-In Cartridge Valves Series CE, CP, C

2 Way Slip-In Cartridge Valves Series CE, CP, C tlogue H-3500/UK hrcteristics Wy Slip-In rtridge lves Series E,, wy slip-in crtridge vlves re hydruliclly controlled set vlves tht re designed for compct block instlltion. Slip-in crtridge, cover, nd pilot

More information

Murtfeldt Internet Chain Tensioners for Roller Chains to DIN8187

Murtfeldt Internet   Chain Tensioners for Roller Chains to DIN8187 Murtfeldt Internet www.murtfeldt.de Chin Tensioners for Roller Chins to DIN8187 185 186 Murtfeldt E-mil info@murtfeldt.de Murtfeldt Fxline +49-231- 25 10 21 Chin Tensioners with Arc Segment Profile for

More information

Decor Radiators Baseboard

Decor Radiators Baseboard Decor Rditors Bsebord Pedestl 11 (with fins) Avilble in outputs from 1,561 to 10,282 Btu/hr; 2, nd 4 tubes high. 28 (igh Output, with fins) Avilble in outputs from 5,05 to 19,552 Btu/hr; 2 nd 4 tubes high.

More information

Convenience electronics

Convenience electronics Convenience electronics Displys on "opening" the roof To gurntee high level of sfety, roof movement is ccompnied, depending on the equipment vrint, y opticl, coustic nd/or text displys/indictions. The

More information

The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.

The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs. FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic

More information

ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets

ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd

More information

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY L08 CLL -800--600 R CS 0 FULL FUNCTION TERMINL " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I, CEN III GS OR CEN IV GS SFES SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS

More information

203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

203mm (8) MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8) MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY L0 CLL -800--600 R CS 0 FULL FUNCTION VESTIBULE TERMINL " OR " DISPLY-THROUGH 0mm ( MXIMUM WLL 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR

More information

3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION

3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2) UL SAFE - 15 DISPLAY OR 19 DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR

More information

3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94

3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94 3/2 nd 4/2-wy Directionl oppet Vlves with Solenoid Opertion Model M-SED 6, Series X Size 6 000 SI (30 r) 6.6 GM (2 L/min) R 22 049/06.98 R 22 049/06.98 Replces: 02.96 Fetures: Direct operted directionl

More information

631 ALLOWANES AND TOLERANCES

631 ALLOWANES AND TOLERANCES 631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce

More information

Low Pressure Domestic Burners

Low Pressure Domestic Burners 95 CHAPTER 12 Low Pressure Domestic Burners The principle of vporiing oil in low pressure burner is shown in fig. 1. Air nd oil re mixed within the nole, then Y ---U OIL NOZZLE j FIG. 1. Digrm showing

More information

CV3000 Series Smart-Port Single Seated Control Valves with Steam Jacket Model HLS

CV3000 Series Smart-Port Single Seated Control Valves with Steam Jacket Model HLS No. SS2-8113-0220 CV3000 Series Smrt-Port Single Seted Control Vlves with Stem Jcket Model HLS OVERVIEW Model HLS Smll-Port Single Seted Control Vlves with Stem Jcket re designed for hevy duty service

More information

2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation

2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation 0/0 /, / nd / directionl poppet vlve with solenoid ctution.7 Type M-.SEW...LX Size Up to 0 r Up to 0 L/min Contents Function nd configurtion Symols 0 Specifiction 0 Technicl dt 0 Electricl dt 0 Chrcteristic

More information

AWWA Grooved Fittings

AWWA Grooved Fittings WW Grooved Produts WW Grooved Fittings MTERI SPECIFICTIONS Mteril - Dutile Iron per STM 53 Grde 5-45-12. Interior lining - Cement lined per NSI/WW C104/21.4 sizes 3 single thikness nd sizes 4-3 doule thikness

More information

KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2

KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2 KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2 Keypd Progrmmble nd SNAP Comptible Trim For Rim Exit Devices Mounted On Aluminum Doors. 57047-B 04-2007 Contents of the Box KC9357/KC9357-2 INSTALLATION

More information

OPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT

OPTIONAL 178mm (7) SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6) 330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT L88 CLL -0--600 R DIEBOLD 0 CSH RECYCLER WITH COIN 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES THROUGH 0mm (") MXIMUM WLL 64 SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND

More information