Control stations and enclosures Control station enclosures : insulated, metal and flush mounting
|
|
|
- Evangeline Allison
- 6 years ago
- Views:
Transcription
1 Chrcteristics Control sttions nd enclosures Control sttion enclosures : insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil version : CSA ENCLOSURE 4 nd 5 Protective tretment Stndrd version : TC nd TH Amient ir temperture Opertion : C. Storge : C Degree of protection IP 65 conforming to IEC 529 nd IP 657 conforming to NF C Electric shock protection Clss II conforming to IEC 536 nd NF C Flme resistnce Chemicl resistnce CSTB : M3, NF C : 850 C, IEC 92 : 960 C, UL 94 : VO Highly resistnt to cids, ses, se wter, minerl slts, ll solvents, petrol, diesel, oils nd greses Cle entry Diecst metl enclosures XAP-M Undrilled, drill to suit Mteril nd colour Approvls Protective tretment Zinc lloy (XAP-M1, M2, M3, M4), luminium lloy (XAP-M5). Blue pint finish Specil version : CSA ENCLOSURE 4 nd 5, UL ENCLOSURE 1, 3, 4 nd 12K Stndrd version : TC. Specil version : TH Amient ir temperture Opertion : C. Storge : C Degree of protection IP 65 conforming to IEC 529 nd IP 657 conforming to NF C Electric shock protection Clss I conforming to IEC 536 nd NF C Chemicl resistnce Specil tretments on request Cle entry Tpped entries for ddition of cle glnds (see dimensions, pge 35050/6) Metl enclosures XB2-S Mteril nd colour Protective tretment Aluminium lloy or sheet steel. Blue pint finish Stndrd version : TC. Specil version : TH Amient ir temperture Opertion : C. Storge : C Degree of protection IP 54 conforming to IEC 529 nd IP 547 conforming to NF C Electric shock protection Clss I conforming to IEC 536 nd NF C Chemicl resistnce Specil tretments on request Cle entry XB2-S in luminium lloy : tpped entries for ddition of cle glnds (see dimensions, pge 35050/6) Flush mounting enclosures XAP-E XB2-S in sheet steel : undrilled, drill to suit Mteril nd colour Protective tretment Anodised luminium front plte. Insulted protective rer cover Stndrd version : TC nd TH Amient ir temperture Opertion : C. Storge : C Degree of protection IP 65 conforming to IEC 529 nd IP 657 conforming to NF C Electric shock protection Clss I conforming to IEC 536 nd NF C Chemicl resistnce Cle entry References : pges 35050/3 to 35050/ _Ver4.00-EN.fm/2 High degree of resistnce to orgnic cids, diluted minerl cids, slts, lcohol, cetone, chloride nd fluoride solvents, oils nd petrol Through rer cover : knock-out cle entries pges 35050/6 nd 35050/7
2 References Control sttions nd enclosures Control sttion enclosures : insulted, metl nd With cut-outs for Ø 22 mm control nd signlling units Insulted enclosures, glss-reinforced polyester (usle depth 83 mm) Description Front fce Numer Numer of rows Reference Weight dimensions of verticl horizontl mm cut-outs kg Without 85 x XAP-A hinges XAP-A XAP-A XAP-A x XAP-A x XAP-A XAP-A2108 With 151 x XAP-A hinges Erthing For XAP-A1110 XAP-Z pltes Sheet steel with erth screw For XAP-A1120 XAP-Z For XAP-A1104 XAP-Z XAP-A3116 For XAP-A2108 XAP-Z For XAP-A3116 nd A4116 XAP-Z Elowed metl enclosures for mounting on verticl support Description Numer of Reference Weight cut-outs kg DWG-/ Elowed enclosure 1 DWG metl Lid : light grey (RAL 7035) 2 DWG Bse : drk grey (RAL 7016) 3 DWG Chrcteristics : pge 35050/2 Other versions pge 35050/6 4 DWG DWG DWG DWG Insulted nd metl control sttion enclosures with cut-outs for Ø 30 mm control nd signlling units. Protective gurds nd fixing lugs for diecst metl enclosures. Insulted nd metl control sttion enclosures pre-fitted with Ø 22 units. Adjustle floor mounting pedestl (790 to 1143 mm) for sheet steel enclosures. Plese consult your Regionl Sles Office _Ver4.00-EN.fm/3
3 References Control sttions nd enclosures Control sttion enclosures : insulted, metl nd With cut-outs for Ø 22 mm control nd signlling units XAP-M1202 XAP-M2203 Diecst metl enclosures (lue lid nd se) Description Front fce Numer Numer of rows Reference Weight dimensions of verticl horizontl mm cut-outs kg Zinc lloy 80 x XAP-M Usle depth XAP-M mm 80 x XAP-M XAP-M XAP-M x XAP-M XAP-M XAP-M XAP-M2504 XAP-M4508 Zinc lloy 80 x XAP-M Usle depth XAP-M mm 80 x XAP-M XAP-M XAP-M x XAP-M XAP-M XAP-M x XAP-M XAP-M XB2-SL42009 Aluminium lloy 85 x XAP-M Usle depth 74.5 mm XAP-M Aluminium lloy x XB2-SL Usle depth 78 mm XB2-SL Diecst metl enclosures (yellow lid, lue se) XB2-SL64007 Zinc lloy 80 x XAP-J Usle depth 49 mm Zinc lloy 80 x XAP-J Usle depth 74.5 mm Sheet steel enclosures Usle depth 200 x XB2-SL mm 200 x XB2-SL x XB2-SL x XB2-SL x XB2-SL Chrcteristics : pge 35050/ _Ver4.00-EN.fm/4 pge 35050/6 Other versions Insulted nd metl control sttion enclosures with cut-outs for Ø 30 mm control nd signlling units. Protective gurds nd fixing lugs for diecst metl enclosures. Insulted nd metl control sttion enclosures pre-fitted with Ø 30 XB2-M units. Adjustle floor mounting pedestl (790 to 1143 mm) for sheet steel enclosures. Plese consult your Regionl Sles Office.
4 References Control sttions nd enclosures Control sttion enclosures : insulted, metl nd Undrilled or with cut-outs for Ø 22 mm control nd signlling units XAP-A1100 XAP-A2100 Insulted enclosures, undrilled Description Front fce Reference Weight dimensions mm kg Usle depth Without hinges 85 x 146 XAP-A mm 85 x 226 XAP-A x 241 XAP-A With hinges 151 x 241 XAP-A Erthing pltes For XAP-A1100 XAP-Z with erth screw For XAP-A2100 XAP-Z For XAP-A3100 nd A4100 XAP-Z Diecst metl enclosures, undrilled XAP-A3100 XAP-M11 XAP-E301 XAP-E303 XAP-M31 XAP-E302 XAP-E305 Blue lid nd se Zinc lloy 80 x 80 XAP-M Usle depth 49 mm 80 x 130 XAP-M x 175 XAP-M Zinc lloy 80 x 80 XAP-M Usle depth 74.5 mm 80 x 130 XAP-M x 175 XAP-M x 220 XAP-M Aluminium lloy 85 x 310 XAP-M Usle depth 74.5 mm Aluminium lloy x XB2-SA Usle depth 78 mm Yellow lid, Zinc lloy 80 x 80 XAP-J lue se Usle depth 49 mm Zinc lloy 80 x 80 XAP-J Usle depth 74.5 mm 80 x 175 XAP-J Flush mounting enclosures for Ø 22 mm control nd signlling units Description Mteril Numer Front fce Reference Weight of dimensions cut-outs mm kg Front pltes Anodised 1 72 x 72 XAP-E with fixing screws luminium 2 72 x 105 XAP-E x 138 XAP-E x 171 XAP-E x 204 XAP-E Protective Insulted For front plte XAP-E301 XAP-E rer covers For front plte XAP-E302 XAP-E For front plte XAP-E303 XAP-E For front plte XAP-E304 XAP-E For front plte XAP-E305 XAP-E Accessories ZB2-SZ2 Blnking plugs Insulted Blck ZB2-SZ with sel nd fixing nut For cut-outs Ø mm Grey ZB2-SZ Metl Blue ZB2-SZ ZB2-SZ3 ZB2-SZ4 Chrcteristics : pge 35050/2 Sel (degree of protection IP 65) For mounting Ø 22 ZB2-BZ (sold in lots of 7) control nd signlling units in DWG/ enclosures Other versions Protective gurds nd fixing lugs for diecst metl enclosures. Flush mounting enclosures, undrilled or with Ø 30 mm cut-outs. Flush mounting control sttion enclosures pre-fitted with Ø 22 mm units. Plese consult your Regionl Sles Office. pge 35050/ _Ver4.00-EN.fm/5
5 Dimensions Control sttions nd enclosures Control sttion enclosures : insulted, metl nd With cut-outs for Ø 22 mm control nd signlling units Insulted enclosures with cut-outs XAP-A P=83 = 1 1 = Fixing (2) XAP- 1 2 G H A A A A A3116, A Drill cle entries to suit. 11 mm for XAP-A4/// enclosures with hinges. (2) 2 x Ø 5.6 mm holes, depth 12 mm. P = Usle depth 87 = 2 2 = Diecst metl enclosures with cut-outs XAP-J, XAP-M P=74 = 1 1 = = 60 = = 60 = Fixing XAP- 1 2 c G H P (3) J J P M1201, M M M M M c = 2 = (2) M M M M M XB2-SL32009 (4) Fixing M M M M M M M M = = M hole, without lnking plug, for cle glnd with 14 mm mximum clmping cpcity, except : - XAP-M3/// nd XAP-M4/// : mximum cpcity 18 mm, XB2-SL42009 Fixing - XAP-M5/// : mximum cpcity 24 mm. (4) (2) 1 hole, with lnking plug (protrusion 6 mm), for cle glnd with 14 mm mximum clmping cpcity, except : P=74 - XAP-M3/// : mximum cpcity 18 mm, - XAP-M4/// nd XAP-M5/// : undrilled. (3) 2 x Ø 5.6 mm holes, depth 20 mm. (4) 2 holes, with lnking plugs (protrusion 7.5 mm), for cle glnds with 12 mm mximum clmping cpcity. 78 = = P = Usle depth Sheet steel enclosures XB2-SL Elowed enclosures DWG-/ P=115 = = _Ver4.00-EN.fm/6 120 = = XB2-1 2 SL SL SL SL SL Chrcteristics : pge 35050/2 Enclosures supplied without fixing points or cle entries. In oth cses, drill to suit. The enclosures re deep enough to ccommodte ll Ø 22 control nd ccommodte ll Ø 22 control nd signlling units. P = Usle depth References : pges 35050/3 nd 35050/4 c 30 c DWG DWG DWG DWG DWG DWG DWG
6 Dimensions Control sttions nd enclosures Control sttion enclosures : insulted, metl nd Undrilled nd with cut-outs for Ø 22 mm control nd signlling units Undrilled insulted enclosures XAP-A1100, XAP-A2100 Fixing XAP-A3100, XAP-A4100 XAP- G H A A P=83 (2) A A Drill cle entries to suit. 11 mm for XAP-A4/// enclosures with hinges. (2) 2 x Ø 5.6 mm holes, depth 12 mm. 87 P = Usle depth Undrilled diecst metl enclosures XAP-J//, XAP-M// P c = = XB2-SA (4) P=74 (2) Fixing (3) XAP- c G H P J J J M M M M M M M M hole, without lnking plug, for cle glnd with 14 mm mximum clmping cpcity, except : - XAP-J34, M31, M34 nd M44 : mximum cpcity 18 mm, - XAP-M54 : mximum cpcity 24 mm. (2) 1 hole, with lnking plug (protrusion 6 mm), for cle glnd with 14 mm mximum clmping cpcity, except : - XAP-J34, M31, M34 : mximum cpcity 18 mm, - XAP-M44, M54 : undrilled. (3) 2 x Ø 5.6 mm holes, depth 20 mm. (4) 2 holes, with lnking plugs (protrusion 7.5 mm), for cle glnds with 12 mm mximum clmping cpcity. 78 = = P = Usle depth Flush mounting enclosures Front pltes with cut-outs for Ø 22 mm control nd signlling units For Ø 22 mm control nd signlling units XAP-E30/ Pnel cut-out Front plte 14,5 60 4xM4 XAP- 1 H E E E E E = 56 = Mounting of front plte nd protective rer cover P = = 72 = = 56 1 H Protective rer cover for front plte XAP-E30/ XAP- P E E E E E P = Usle depth Chrcteristics : pge 35050/2 80 = = 59 References : pge 35050/ _Ver4.00-EN.fm/7
Control stations and enclosures
Chrcteristics Control sttions nd enclosures Control sttion enclosures: insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil version:
HA series the slim connectors
HA series the slim connectors RockStr inserts HA series the slim connectors When spce is tight, the smll nd nrrow HA series comes into its own. Technicl dt Stndrds / pprovls Stndrds DIN EN 61984 Approvls
4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
MixMate series the high-capacity connectors
MixMte series the high-cpcity connectors RockStr inserts MixMte series the high-cpcity connectors MixMte integrtes xil screw contcts nd TOP connection technology in one plug-in connector. The compct design
HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version
EAT-SINK ALUMINIUM ENCLOSURE Y SERIES NEW size dded nd selectble in 5 sizes. Excellent Cooling Performnce The wved surfce on the fins increses cooling performnce. Wved surfce Added new length version New
POWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch
POWER COMBICON Plugs nd Heders PC 6/ for Currents up to 41 A, The PC 6 plug connector fetures highly conductive metl lloys to offer current crrying cpcity of 41 A t rted voltge of 1000 V. A double steel
00083FAB-DC DRAWN BY DATE CHK SCALE SIZE
D0D/6 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. 0 5/4/8 SPLIT SIDE PNEL JGC TOP CP CURVED PERFORTED SINGLE HINGE DOOR SPLIT SIDE PNEL
HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version
EAT-SINK ALUMINIUM ENCLOSURE Y SERIES NE size dded nd selectble in 5 sizes. Excellent Cooling Performnce The wved surfce on the fins increses cooling performnce. ved surfce Added new length version New
HSB series the heavy-duty connectors
HS series the hevy-duty connectors HS series the hevy-duty connectors The HS series provides users with 3 A vi ech contct with screw connections for sfe nd relile connection. Technicl dt Stndrds / pprovls
HDD series the compact connectors
HDD series the compct connectors RockStr inserts HDD series the compct connectors The HDD series with turned contcts is designed for mny poles in smll spce. The compct housing design sves the user spce
Aluminium Floor Outlets - Trapped Outlets
Aluminium Floor Outlets - Trpped Outlets Verticl Trpped Outlet Components Drin Body Dimensions 260 Grte* Funnel Sel Trp Assemly Funnel Cup * Elevtion Throt Throt Sel DPM Clmp Ring with Weep Bung (shown
JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)
Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if
4/2 and 4/3 Solenoid Directional Valve, ISO Size 03
4/ nd 4/3 Solenoid Directionl Vlve, ISO Size 03 Q mx = 60 l/min, p mx = 315 r wo-stge design, with EX-sfty solenoid coil Vlve: High switching relilility thnks to two-stge follower spool design Slip-on
TOP CAP KNOCK-OUTS FOR
2 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP.. VISIT OUR ON-LINE CTLOG T WWW.PNDUIT.COM FOR LIST OF CURRENT PRTS PPLICLE FOR TOP CP
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL 2 TOP CP PERFORTED SINGLE HINGE KNOCK-OUTS FOR PDU POWER CORD SIDE PNEL RER PERFORTED
Brazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
13V399AN-DC DRAWN BY DATE CHK SCALE SIZE
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. TOP CP 2 KNOCK-OUTS FOR PDU POWER CORD PERFORTED SINGLE HINGE SPLIT DOOR SIDE PNEL IN SOME
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. DUL HINGE PERFORTED FRONT SPLIT SIDE PNEL SOLID SELED RER SPLIT SIDE PNEL VED REDY INTEGRL
DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION
L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
E16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A
E1DU, E45DU, E80DU, E140DU electronic overlod relys 0.10 to 140 A Description 2CDC231001F0007 The E1DU up to E140DU re selfsupplied electronic overlod relys, which mens no extr externl supply is needed.
Our sunshade for outdoor
SCHATTELLO You would like to plese our guests on hot summer s d offering them welcoming set outdoors in the cool shde? Or to chrm them on nipp d or chill night conjuring up cos tmosphere with dimmed lights
XAL control stations for Harmony style 5 Ø 22 control and signalling units with double insulated bezel Complete stations (screw clamp connections)
pages /2 and / pages /4 and /5 Complete stations (screw clamp connections) References Start or function (light grey base RAL 705, dark grey lid RAL 7016 ) Description Type Contact type Marking Reference
Multiply the possibilities, go beyond the limits
Multiply the possiilities, go eyond the limits WARRANTY LIFETIME POWERED BY NITEKO Modulr high performnce LED floodlight Glleries High power plus compct nd essentil design: Multiplo ws orn for lrge res
Harmer Roof Drainage The Cast Iron Range
Cst Iron Roof Outlets - Introduction Hrmer Roof Dringe The Cst Iron Rnge The high qulity Cst Iron Roof Outlet rnge, feturing medium sump nd lrge sump odies, two-wy outlets nd n extensive rnge of lodering
GX-M SERIES DIMENSIONS (Unit: mm in) DC 3-wire type Sensors 2 m cable length type M12 plug-in connector type Shielded type GX-M8 GX-M12 GX-M18
Cylindricl Sensors DIMENSIONS (Unit: mm in) DC -wire type LED Sensors m cle length type (mm in) M plug-in connector type (mm in) Shielded type Photoelectric sensor CY-00 SERIES Lser sensor CY-L00 SERIES
TA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures
Directional Valve. NG 04 WL4.04 Installation dimensions ISO 4401/ DIN A4
Directionl Vlve NG 04 WL4.04 Instlltion dimensions ISO 4401/ DIN 4340 4 Functionl Description he directionl control vlves WL 4/04 consists of housing (1), control spool (5) with two centering springs (4)
ELECTRICAL SYSTEM 4 D INSTRUMENTATION
ELECTRICAL SYSTEM 4 D 72747 INSTRUMENTATION Tle of Contents Pge Identifiction............................. 4D-1 Specil Informtion....................... 4D-1 Lighting Options....................... 4D-1
SINEAX C 402 Alarm unit
for DC currents or DC voltges 00 II () G Appliction The lrm unit SINEAX C40 (Figure ) is normlly pplied to monitor the limits of oth current nd voltge mesurements. The sttus of the device is signlled remotely
RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
Directional Valve Size 06 WL 4.06
Directionl Vlve Size 06 WL 4.06 Instlltion dimensions ISO 4401/DIN 24340 6 Directionl vlve size 06 instlltion dimensions ISO 4401 / DIN 24340 6 Functionl Description he directionl control vlves WL 4/06
Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4
Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators
3-Wy Bll Vlve Assemblies Using TAC DurDrive Actutors Note: All vlve sizes ANSI Clss IV (0.01% of C v ) shut off, piped coil-side outlet to A. Tble-5 Selection Chrt3-Wy Mixing Bll Vlve Assemblies with TAC
BIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
GUARDIAN VERTICAL MOUNTING
GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes p Versatile, lightweight & durable p Choice of materials: polycarbonate for rugged applications or ABS as an economic alternative p IP protection for outdoor
* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. CAD data is downloadable from our web. Available in 16 sizes. Screws are not appeared on the surface.
MSR SERIES MSR RACK MOUNTING ENCLOSURE CAD dt is downlodble from our web. Avilble rnge -30 FEATURE Avilble in 16 sizes. Screws re not ppered on the surfce. Esy to punching or hole milling on front nd rer
UNIVERSAL ALUMINIUM CASE
UC SERIES UNIVERSAL ALUMINIUM CASE 3 2 4 Simple structure nd tough cse with extruded luminium covers. 36 sizes nd 3 different colors for totl of 108 different combintions re vilble. 2 or 3 grooves vilble
RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. Technical data Protection class IP40. CAD data is downloadable from our website.
MSR SERIES Technicl dt Protection clss IP40 MSR RACK MOUNTING ENCLOSURE CAD dt is downlodble from our website. Avilble rnge W-30 FEATURE Avilble in 16 sizes. Screws re not ppered on the surfce for sophisticted
Directional Valve Size 04 WL 4.04
Directionl Vlve Size 04 WL 4.04 Instlltion dimensions ISO 4401/ DIN 24340 4 Directionl vlve size 04 instlltion dimensions ISO 4401 / DIN 24340 4 Functionl description he directionl control vlves WL 4/04
Limit switches Osiswitch Classic For hoisting and materials handling applications, type XCR Complete switches with 1 cable entry
References, characteristics For hoisting and materials handling applications, type XCR Complete switches with cable entry Type of head Rotary with spring return to off position Stay put Maximum displacement
HYDRANT & GATE VALVE INSTALLATION
HYDRNT FLG TO BE INSTLLED ON THE NOZZLE SECTION 5' TYPICL (3' MINIMUM) HYDRNT, CLOW MEDLLION 1.0' HYDRNT STEMER KIT - 4.5" NH - 5" STORZ METL FCE DPTER WITH STORZ CP. IF OPTIONL LOCKING CP IS DESIRED,
DIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7
L2 CLL -800--600 TP-826-00. R CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE DIEBOLD 00 - IN LOBBY TELLER (ILT) PORTRIT OR LNDSCPE
Accessories. Guard grille, streamers 238. Wall rings 248. Connection leads 250. Accessories for ESM and Q-motor 250
Generl informtion Gurd grille, stremers 238 Wll rings 248 Connetion leds 250 Aessories for nd 250 Terminl ox, motor protetion swith, speed setting, str-delt swith, repir swith, pitors 256 237 Contts Tehnology
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
MISCELLANEOUS INDEX PAGE DATE SERIES DESCRIPTION
MISCELLNEOUS INDEX 08/01/11 PGE DTE SERIES DESCRIPTION M-1 08/01/11 Miscellaneous Index M-2 04/16/96 M01 Tooling all M-3 04/16/96 M02 Scrap Chute Hook and Retainer racket M-4 01/03/95 M03 Scrap Chute Chain
Solenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
GASTRONORM 1/1, 2/1 & EURONORM 1/1 ISOTHERMAL TROLLEYS TO SECURE YOUR LOGISTICS
ZOOM Cpcities nd configurtions to meet ll your needs GSTRONORM 1/1, 2/1 & EURONORM 1/1 ISOTERML TROLLEYS TO SECURE YOUR LOGISTICS Refrigerted SERVITERM GSTRONORM 1/1 - ville wit nd 14 levels MODELS LEVELS
Hazardous Location Push Button Specifications
Technicl Dt Hzrdous Loction Push Button Specifictions Bulletin Numers 800G, 800H, nd 800R Topic Pge Topic Pge 800H Type 7&9 Hzrdous Loction Push Buttons 800G Hzrdous Loction Push Buttons Specifictions
8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS
L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
IS OL ATOR S S E RIE S. Enclosed change-over switches I/O/II
IS OL TOR S S E RIE S Enclosed changeover switches I/O/II ISOLTORS Series ENCLOSED CHNGEOVER SWITCHES I/O/II, 0 1 Poles IP degree IP65(*) 1/5 IP65(*) 1/5 IP65(*) 1/5 IP65(*) 1 IP65(*) 1 THERMOPLSTIC LUMINIUM
8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
CS 7780 FULL FUNCTION DRIVE-UP TERMINAL
L CLL -800--600 CS 80 FULL FUNCTION DRIVE-UP TERMINL mm ( ") UL - "or " DISPLY THROUGH 0mm (8") MXIMUM WLL CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
NET-ACCESS S TYPE VED READY CABINET 600mm WIDE X 1200mm DEEP FAMILY 12V343ST-DC VED TOP CAP FRONT PERFORATED SINGLE HINGE DOOR SPLIT SIDE PANEL
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. PNEL VED TOP CP PERFORTED SINGLE HINGE PNEL SOLID RER NET-CCESS S TYPE VED REDY CINET 600mm
VTC Series Video Telepresence Cart
96-01183 / rev 1b / 6-18-13 VTC Series Video Telepresence Cart ECEPTIONL SUPPORT & PROTECTION EI/TI Compliant Versatile Videoconferencing and Presentation cart designed to accommodate large displays and
AWWA Grooved Fittings
WW Grooved Sumittl Form WW Grooved Fittings SUMITT INFORMTION PROECT NME: ENGINEER: CONTRCTOR: WW Grooved Fitting SPEC. SECTION: MEMER FETURES & DVNTGES Fittings supplied with rigid rdius grooves in ordne
The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
ELECTRIC CYLINDER SERIES ELEKTRO ROUND DC
ELECTRIC CYLINDER SERIES ELEKTRO ROUND DC In the ELEKTRO ROUND DC cylinder, the forward movement of the piston rod is obtained via an acme screw and a self-lubricating technopolymer nut. This piston has
DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL
C&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
Accessories. Inlet nozzles 550. Guard grilles 553. Lead connections, capacitors 558. Terminal boxes, air filters 562
Accessories Generl informtion Inlet nozzles 550 Gurd grilles 553 Led connections, cpcitors 558 Terminl boxes, ir filters 562 Speed setting, motor protection switch, third-prty ccessories 564 Technology
AWWA Grooved Fittings
WW Grooved Produts WW Grooved Fittings MTERI SPECIFICTIONS Mteril - Dutile Iron per STM 53 Grde 5-45-12. Interior lining - Cement lined per NSI/WW C104/21.4 sizes 3 single thikness nd sizes 4-3 doule thikness
Solenoid operated spool valve with soft switching NG10 ISO
WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool
2: Ecokit Ecokit 11 Overview A 2_ Ecokit 11 Sub Rack Configuration A 2_ Width A 2_ Height / Depth A 2_6
2: Ecokit 11 2.1 Ecokit 11 Overview 2_3 2.2 Ecokit 11 Sub Rack Configuration 2_5 2.2.1 Width 2_5 2.2.2 Height / Depth 2_6 2.2.3 Handles 2_6 2.2.4 Line Drawing 2_7 2.3 daptation Kits 2_8 2.3.1 daptation
Control stations and enclosures Pendant control stations, for control circuits Double insulated, type XAC-A
Characteristics Environment Conforming to standards IEC 947-5-1, EN 60947-5-1 Approvals Protective treatment NEMKO. Special version : UL Listed A600-Q600, CSA A600-Q600 Standard version : TH Ambient air
Thermocouple Thermometer omnigrad S- TC 88
Technicl informtion TI 279T/02/en 60022508 Thermocouple Thermometer omnigrd S- TC 88 Thermocouple ssembly with extension neck Replceble insert PCP (4...20 ma), HART or PROFIBUS-PA electronics The TC 88
CS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")
L08 CLL -800--600 " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
EXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 6X NEC STANDARD
EXLOSION ROOF DIRECIONL CONROL VLVE YE ED SERIE X NEC SNDRD CRCERISICS Hydrulic : Cetop. Mximum pressure in service : r. Nominl Flow mx. : 0 l/mn.(see tle) Directionl control vlves re solenoid operted
RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009
Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009
COIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL
SIDE CR FOR INSTLLTION NEXT TO DIEBOLD 00 - IN LOBBY TELLER (ILT) L2 CLL -800--600 CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
ELECTRICAL CHARACTERISTICS. Permissible overload (A) 22 > transformer 42 > > > > >
IEC 309 TS New range of plugs and socket-outlets meeting the dimensional, construction/performance and safety requisites defined by the international Standards IEC 60309-1 and IEC 60309-2, subsequently
ABS PIPES & FITTINGS THE INDUSTRY STANDARD FOR A WIDE RANGE OF APPLICATIONS
S PIPES & FITTINGS THE INDUSTRY STNDRD FOR WE RNGE OF PPLICTIONS VUX VERSION 2 S PIPE & FITTINGS FOR INDUSTRIL PPLICTIONS INTRODUCTION S thermoplastics are recognized as a suitable material to be used
DC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor
Huell Industril Controls, Inc. 716 1600 Ampere 1500 Volt DC Contctor Ctlog 42716 Mrch 2013, Replces Septemer 2005 42716 Highlights Non-polrized rc chute (series lowout coil) design s stndrd Optionl polrized
Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
P17 plugs, mobile sockets and surface-mounting sockets «New range 16 and 32 A»
87045 LIMOGES Cedex Telephone : + 33 0 5 55 06 87 87 - Fax : + 33 0 5 55 06 88 88 P7 plugs, mobile and surface- Cat. Nos. : 555 53/57/58/73/77/78-5 53/57/58/73/77/78 CONTENTS Page 575 4. Definition....
330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15
L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
TP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
ADVANCE GRP Series 125A Switched Interlocked socket outlets
DVNCE GRP Series 125 Switched Interlocked socket outlets DVNCE GRP Series 125 > SWITCHED INTERLOCKED SOCKET OUTLETS > REFERENCE STNDRDS EN 60309-1 Plugs, socket outlets and couples for industrial purposes.
8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
Plug-in connectors for power electronics
Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 480 PHOENIX CONTACT Plug-in
JUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
RegloCard-Plus / Combifront / InterCard
RegloCard-Plus / Combifront / InterCard Detailed product information can be found on www.bopla.de - 8 sizes, each in 6 versions - 3 different fronts - Metric or PG pre-punchings - Terminal compartment
3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
P3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class. Special features. Dimensions (in mm) B en 1
P3IC / P3ICP Absolute pressure trnsducer Industril Clss Dtenbltt Specil fetures - For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions - Nominl (rted) pressure 10 br to 3000 br -
Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.
Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description
STANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES
L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00
P3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class" Special features. Dimensions (in mm) B en
P3IC / P3ICP Absolute pressure trnsducer Industril Clss" Dtenbltt Specil fetures For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions Nominl (rted) pressure 10 br to 3000 br Strin
F Series Pushbutton Switches
F Series Features/Benefits Up to 10 poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection