HDD series the compact connectors
|
|
|
- Melvin Blair
- 5 years ago
- Views:
Transcription
1 HDD series the compct connectors RockStr inserts HDD series the compct connectors The HDD series with turned contcts is designed for mny poles in smll spce. The compct housing design sves the user spce without compromising the numer of poles. Technicl dt Stndrds / pprovls Stndrds DIN EN DIN EN Approvls UL/CSA No. of poles 24, 42, 72, 108, 144, PE Rted voltge 250 V Rted voltge to UL/CSA 0 V Rted current 10 A Rted impulse withstnd voltge 4 KV Pollution severity 3 Insultion resistnce Ω Mteril Glss-fire reinforced PC (in UL list nd pproved for rilwy pplictions) Temperture rnge 40 C C Flmmility to UL 94 V 0 Mechnicl service life Plugging cycles Ag - Surfce 500 Plugging cycles Au - Surfce 500 Contct resistnce 4 mω Contcts / Mteril Sockets nd plug-in contct Copper lloy Surfce Pssivted silver, or 0.8 μm gold on 2 μm nickel Flexile conductor connection mm 2 (AWG 26 14) Stripping length 8.0 mm Clmping torque Screw connection SD ldes Screw connection Push In Tension clmp connection PE connection Clmping rnge mm 2 solid / strnded mm 2 / mm 2 flexile / flexile with wire end ferrule, DIN pt mm 2 / mm 2 AWG conductor AWG Stripping length 10 mm Clmping torque Nm lde dimensions SD 0.8 x 4 mm or PZ 1 Note: Switch off power supply efore hndling plug-in connectors. Lod current [A] Lod current [A] Derting curves HDD 1.5 mm 2 HDD 2.5 mm 2 Amient temperture [ C] Amient temperture [ C].64 Clerwter Tech - Phone: Fx: We: - Emil: info@clrwtr.com
2 HDD series - the compct connectors RockStr inserts 250 V, 10 A, Size h Insert Designtion Order No. Mle HDC HDD 24 MC Femle HDC HDD 24 FC Dimensions Mle Femle Arrngement of contcts Mle 2372 Femle Mounting cut-out M Accessories Crimp contcts Surfce silver Surfce gold Qty. Mle Order No. Femle Order No. 100 HDC-C-HD-SM AG HDC-C-HD-M AG HDC-C-HD-SM0.5AG HDC-C-HD-M0.5AG HDC-C-HD-SM0.75-1AG HDC-C-HD-M0.75-1AG HDC-C-HD-SM1.5AG HDC-C-HD-M1.5AG HDC-C-HD-SM2.5AG HDC-C-HD-M2.5AG HDC-C-HD-SM AU HDC-C-HD-M AU HDC-C-HD-SM0.5AU HDC-C-HD-M0.5AU HDC-C-HD-SM0.75-1AU HDC-C-HD-M0.75-1AU HDC-C-HD-SM1.5AU HDC-C-HD-M1.5AU HDC-C-HD-SM2.5AU HDC-C-HD-M2.5AU Single contcts Conductor mm 2 AWG No Tools Crimping tool Order No. CTX CM 1.6/ Contct removl tool Removl Tool HD Clerwter Tech - Phone: Fx: We: - Emil: info@clrwtr.com
3 HDD series - the compct connectors Selection of Housings RockStr IP65 Size 3 Hood Hood, Cle Entry sidewys Version (mm) Designtion Order No. M 20 with thred 52 HDC 06 TSLU 1M20G M 20 with thred 52 HDC 06 TSLU 1M20G M 25 with thred 52 HDC 06 TSLU 1M25G M 25 with thred 72 HDC 16D TSLU 1M25G RockStr inserts 75 Hood, Cle Entry t top Version (mm) Designtion Order No. M 20 with thred 52 HDC 06 TOLU 1M20G M 25 with thred 52 HDC 06 TOLU 1M25G M 25 with thred 72 HDC 16D TOLU 1M25G M 32 with thred 72 HDC 16D TOLU 1M32G Version Designtion Order No. for hoods HDC 06 DMDL 1L se ulkhed housing Version (mm) Designtion Order No. 29 HDC 06 ALU with cover 47 HDC 06 ADLU Ø se housing Version (mm) Designtion Order No. M 20 with thred 54 HDC 06 SLU 2M20G M 20 with thred with cover 72 HDC 06 SDLU 2M20G M 25 with thred 54 HDC 06 SLU 2M25G M 25 with thred with cover 72 HDC 06 SDLU 2M25G Ø Version Designtion Order No. for ses HDC 06 DODL 2O Clerwter Tech - Phone: Fx: We: - Emil: info@clrwtr.com
4 HDD series - the compct connectors RockStr inserts 250 V, 10 A, Size h Insert Designtion Order No. Mle HDC HDD 42 MC Femle HDC HDD 42 FC Dimensions Mle Femle Arrngement of contcts Mle 2452 Femle 24 Mounting cut-out M Accessories Crimp contcts Surfce silver Surfce gold Qty. Mle Order No. Femle Order No. 100 HDC-C-HD-SM AG HDC-C-HD-M AG HDC-C-HD-SM0.5AG HDC-C-HD-M0.5AG HDC-C-HD-SM0.75-1AG HDC-C-HD-M0.75-1AG HDC-C-HD-SM1.5AG HDC-C-HD-M1.5AG HDC-C-HD-SM2.5AG HDC-C-HD-M2.5AG HDC-C-HD-SM AU HDC-C-HD-M AU HDC-C-HD-SM0.5AU HDC-C-HD-M0.5AU HDC-C-HD-SM0.75-1AU HDC-C-HD-M0.75-1AU HDC-C-HD-SM1.5AU HDC-C-HD-M1.5AU HDC-C-HD-SM2.5AU HDC-C-HD-M2.5AU Single contcts Conductor mm 2 AWG No Tools Crimping tool Order No. CTX CM 1.6/ Contct removl tool Removl Tool HD Clerwter Tech - Phone: Fx: We: - Emil: info@clrwtr.com
5 HDD series - the compct connectors Selection of Housings RockStr IP65 Size 4 Hood Hood, Cle Entry sidewys Version (mm) Designtion Order No. M 20 with thred 52 HDC 10 TSU 1M20G M 25 with thred 52 HDC 10 TSU 1M25G M 25 with thred 72 HDC 24D TSU 1M25G M 32 with thred 72 HDC 24D TSU 1M32G RockStr inserts Hood, Cle Entry t top Version (mm) Designtion Order No. M 20 with thred 52 HDC 10 TOU 1M20G M 25 with thred 52 HDC 10 TOU 1M25G M 25 with thred 72 HDC 24D TOU 1M25G M 32 with thred 72 HDC 24D TOU 1M32G Version Designtion Order No. for hoods HDC 10 DMDQ 2Q se ulkhed housing Version (mm) Designtion Order No HDC 10 AU Ø se housing Version (mm) Designtion Order No. M 20 with thred 57 HDC 10 SU 2M20G M 25 with thred 57 HDC 10 SU 2M25G M 25 with thred 74 HDC 24D SU 2M25G M 32 with thred 74 HDC 24D SU 2M32G Ø Coupling hood Version (mm) Designtion Order No. M 20 with thred HDC 10 KU 1M20G Version Designtion Order No. for ses HDC 10 DODQ 4O Clerwter Tech - Phone: Fx: We: - Emil: info@clrwtr.com
6 HDD series - the compct connectors RockStr inserts 250 V, 10 A, Size h Insert Designtion Order No. Mle HDC HDD 72 MC Femle HDC HDD 72 FC Dimensions Mle Femle Arrngement of contcts Mle 2532 Femle 2540 Mounting cut-out M Accessories Crimp contcts Surfce silver Surfce gold Qty. Mle Order No. Femle Order No. 100 HDC-C-HD-SM AG HDC-C-HD-M AG HDC-C-HD-SM0.5AG HDC-C-HD-M0.5AG HDC-C-HD-SM0.75-1AG HDC-C-HD-M0.75-1AG HDC-C-HD-SM1.5AG HDC-C-HD-M1.5AG HDC-C-HD-SM2.5AG HDC-C-HD-M2.5AG HDC-C-HD-SM AU HDC-C-HD-M AU HDC-C-HD-SM0.5AU HDC-C-HD-M0.5AU HDC-C-HD-SM0.75-1AU HDC-C-HD-M0.75-1AU HDC-C-HD-SM1.5AU HDC-C-HD-M1.5AU HDC-C-HD-SM2.5AU HDC-C-HD-M2.5AU Single contcts Conductor mm 2 AWG No Tools Crimping tool Order No. CTX CM 1.6/ Contct removl tool Removl Tool HD Clerwter Tech - Phone: Fx: We: - Emil: info@clrwtr.com
7 HDD series - the compct connectors Selection of Housings RockStr IP65 Size 6 Hood Hood, Cle Entry sidewys Version (mm) Designtion Order No. M 25 with thred 61 HDC 16 TSU 1M25G M 25 with thred 76 HDC 40D TSU 1M25G M 32 with thred 76 HDC 40D TSU 1M32G RockStr inserts 59 Hood, Cle Entry t top Version (mm) Designtion Order No. M 25 with thred 61 HDC 16 TOU 1M25G M 25 with thred 76 HDC 40D TOU 1M25G M 32 with thred 76 HDC 40D TOU 1M32G Version Designtion Order No. for hoods HDC 16 DMDQ 2Q se ulkhed housing Version (mm) Designtion Order No. 29 HDC 16 AU Ø se housing Version (mm) Designtion Order No. M 25 with thred 64 HDC 16 SU 2M25G M 25 with thred 84 HDC 40D SU 2M25G M 32 with thred 84 HDC 40D SU 2M32G Ø Coupling hood Version (mm) Designtion Order No. M 25 with thred 79 HDC 40D KU 1M25G M 32 with thred 79 HDC 40D KU 1M32G Version Designtion Order No. for ses HDC 16 DODQ 4O Clerwter Tech - Phone: Fx: We: - Emil: info@clrwtr.com
8 HDD series - the compct connectors RockStr inserts 250 V, 10 A, Size h Insert Designtion Order No. Mle HDC HDD 108 MC Femle HDC HDD 108 FC Dimensions Mle Femle Arrngement of contcts Mle Femle Mounting cut-out M Accessories Crimp contcts Surfce silver Surfce gold Qty. Mle Order No. Femle Order No. 100 HDC-C-HD-SM AG HDC-C-HD-M AG HDC-C-HD-SM0.5AG HDC-C-HD-M0.5AG HDC-C-HD-SM0.75-1AG HDC-C-HD-M0.75-1AG HDC-C-HD-SM1.5AG HDC-C-HD-M1.5AG HDC-C-HD-SM2.5AG HDC-C-HD-M2.5AG HDC-C-HD-SM AU HDC-C-HD-M AU HDC-C-HD-SM0.5AU HDC-C-HD-M0.5AU HDC-C-HD-SM0.75-1AU HDC-C-HD-M0.75-1AU HDC-C-HD-SM1.5AU HDC-C-HD-M1.5AU HDC-C-HD-SM2.5AU HDC-C-HD-M2.5AU Single contcts Conductor mm 2 AWG No Tools Crimping tool Order No. CTX CM 1.6/ Contct removl tool Removl Tool HD Clerwter Tech - Phone: Fx: We: - Emil: info@clrwtr.com
9 HDD series - the compct connectors Selection of Housings RockStr IP65 Size 8 Hood Hood, Cle Entry sidewys Version (mm) Designtion Order No. M 25 with thred 61 HDC 24 TSU 1M25G M 32 with thred 61 HDC 24 TSU 1M32G M 25 with thred 76 HDC 64D TSU 1M25G M 32 with thred 76 HDC 64D TSU 1M32G RockStr inserts 59 Hood, Cle Entry t top Version (mm) Designtion Order No. M 25 with thred 61 HDC 24 TOU 1M25G M 32 with thred 61 HDC 24 TOU 1M32G M 32 with thred 76 HDC 64D TOU 1M32G Version Designtion Order No. for hoods HDC 24 DMDQ 2Q se ulkhed housing Version (mm) Designtion Order No HDC 24 AU Ø se housing Version (mm) Designtion Order No. M 25 with thred 64 HDC 24 SU 2M25G M 25 with thred 84 HDC 64D SU 2M25G M 32 with thred 84 HDC 64D SU 2M32G Ø Coupling hood Version (mm) Designtion Order No. M 25 with thred 65 HDC 24 KU 1M25G M 32 with thred 79 HDC 64D KU 1M32G Version Designtion Order No. for ses HDC 24 DODQ 4O Clerwter Tech - Phone: Fx: We: - Emil: info@clrwtr.com
10 HDD series - the compct connectors RockStr inserts 250 V, 10 A, Size h Insert Designtion Order No. Mle HDC HDD 72 MC Femle HDC HDD 72 FC Mle HDC HDD 144 MC Femle HDC HDD 144 FC Dimensions Mle 84 Femle Arrngement of contcts Mle Femle Mounting cut-out M Note Plese order two contct inserts per housing Accessories Crimp contcts Surfce silver Surfce gold Qty. Mle Order No. Femle Order No. 100 HDC-C-HD-SM AG HDC-C-HD-M AG HDC-C-HD-SM0.5AG HDC-C-HD-M0.5AG HDC-C-HD-SM0.75-1AG HDC-C-HD-M0.75-1AG HDC-C-HD-SM1.5AG HDC-C-HD-M1.5AG HDC-C-HD-SM2.5AG HDC-C-HD-M2.5AG HDC-C-HD-SM AU HDC-C-HD-M AU HDC-C-HD-SM0.5AU HDC-C-HD-M0.5AU HDC-C-HD-SM0.75-1AU HDC-C-HD-M0.75-1AU HDC-C-HD-SM1.5AU HDC-C-HD-M1.5AU HDC-C-HD-SM2.5AU HDC-C-HD-M2.5AU Single contcts Conductor mm 2 AWG No Tools Crimping tool Order No. CTX CM 1.6/ Contct removl tool Removl Tool HD Clerwter Tech - Phone: Fx: We: - Emil: info@clrwtr.com
11 HDD series - the compct connectors Selection of Housings RockStr IP65 Size 10 Hood Hood, Cle Entry sidewys Version (mm) Designtion Order No. M 32 with thred 79 HDC 32 TSLU 1M32G RockStr inserts se ulkhed housing Version (mm) Designtion Order No. with cover HDC 32 ADLU HDC 32 ALU Ø se housing Version (mm) Designtion Order No. M 32 with thred with cover 96 HDC 32 SDLU 2M32G M 32 with thred 79 HDC 32 SLU 2M32G Ø Coupling hood Version (mm) Designtion Order No. M 32 with thred 83 HDC 32 KLU 1M32G Clerwter Tech - Phone: Fx: We: - Emil: info@clrwtr.com
12 HDD series - the compct connectors RockStr inserts 250 V, 10 A, Size h 64 Insert Designtion Order No. Mle HDC HDD 108 MC Femle HDC HDD 108 FC Mle HDC HDD 216 MC Femle HDC HDD 216 FC Note Plese order two contct inserts per housing. Dimensions Mle Femle Arrngement of contcts Mle 72 Femle 80 Mounting cut-out M Accessories Crimp contcts Surfce silver Surfce gold Qty. Mle Order No. Femle Order No. 100 HDC-C-HD-SM AG HDC-C-HD-M AG HDC-C-HD-SM0.5AG HDC-C-HD-M0.5AG HDC-C-HD-SM0.75-1AG HDC-C-HD-M0.75-1AG HDC-C-HD-SM1.5AG HDC-C-HD-M1.5AG HDC-C-HD-SM2.5AG HDC-C-HD-M2.5AG HDC-C-HD-SM AU HDC-C-HD-M AU HDC-C-HD-SM0.5AU HDC-C-HD-M0.5AU HDC-C-HD-SM0.75-1AU HDC-C-HD-M0.75-1AU HDC-C-HD-SM1.5AU HDC-C-HD-M1.5AU HDC-C-HD-SM2.5AU HDC-C-HD-M2.5AU Single contcts Conductor mm 2 AWG No Tools Crimping tool Order No. CTX CM 1.6/ Contct removl tool Removl Tool HD Clerwter Tech - Phone: Fx: We: - Emil: info@clrwtr.com
13 HDD series - the compct connectors Selection of Housings RockStr IP65 Size 12 Hood Hood, Cle Entry sidewys Version (mm) Designtion Order No. M 32 with thred 94 HDC 48 TSLU 1M32G M 40 with thred 94 HDC 48 TSLU 1M40G M 50 with thred 94 HDC 48 TSLU 1M50G RockStr inserts Hood, Cle Entry t top Version (mm) Designtion Order No. M 32 with thred 94 HDC 48 TOLU 1M32G M 50 with thred 94 HDC 48 TOLU 1M50G se ulkhed housing Version (mm) Designtion Order No. with cover 62 HDC 48 ADLU Ø se housing Version (mm) Designtion Order No. M 32 with thred with cover HDC 48 SDLU 2M32G M 32 with thred 100 HDC 48 SLU 2M32G M 40 with thred 100 HDC 48 SLU 2M40G Ø Clerwter Tech - Phone: Fx: We: - Emil: info@clrwtr.com
MixMate series the high-capacity connectors
MixMte series the high-cpcity connectors RockStr inserts MixMte series the high-cpcity connectors MixMte integrtes xil screw contcts nd TOP connection technology in one plug-in connector. The compct design
HA series the slim connectors
HA series the slim connectors RockStr inserts HA series the slim connectors When spce is tight, the smll nd nrrow HA series comes into its own. Technicl dt Stndrds / pprovls Stndrds DIN EN 61984 Approvls
HSB series the heavy-duty connectors
HS series the hevy-duty connectors HS series the hevy-duty connectors The HS series provides users with 3 A vi ech contct with screw connections for sfe nd relile connection. Technicl dt Stndrds / pprovls
E16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A
E1DU, E45DU, E80DU, E140DU electronic overlod relys 0.10 to 140 A Description 2CDC231001F0007 The E1DU up to E140DU re selfsupplied electronic overlod relys, which mens no extr externl supply is needed.
TA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures
POWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch
POWER COMBICON Plugs nd Heders PC 6/ for Currents up to 41 A, The PC 6 plug connector fetures highly conductive metl lloys to offer current crrying cpcity of 41 A t rted voltge of 1000 V. A double steel
Plug-in connectors for power electronics
Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 480 PHOENIX CONTACT Plug-in
Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
Han-Power Energy Bus Components
HARTING Electric Han-Power Energy Bus Components People Power Partnership Han Data Sheet 0080-7 Han-Power T Han-Power T Part-Number Drawing Dimensions in mm 09 12 008 4701 Cable gland please order separately
MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG Rated surge voltage / pollution severity AWG 24..
or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping
Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
Control stations and enclosures Control station enclosures : insulated, metal and flush mounting
Chrcteristics Control sttions nd enclosures Control sttion enclosures : insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil
Han K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/
Han K 3/0, K 3/2 / Han HC Contents Page Technical characteristics Han K 3/0, Han K 3/2... 14.02 Inserts Han K 3/0, Han K 3/2... 14.03 Hoods/Housings Han 24 HPR for Han K 3/0, Han K 3/2... 14.04 Technical
RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
Control stations and enclosures
Chrcteristics Control sttions nd enclosures Control sttion enclosures: insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil version:
HK-003,HC SERIES HK-003 HCSERIES. Modular Heavy-current connector WAIN 12-01
HK-00, SERIES HK-00 SERIES Modular Heavy-current connector 12-01 HK-00/0HK-00/2 Heavy-current inserts HE-006 HK-00 Technical characteristics Specifications Approvals Inserts Number of contacts Electrical
Incremental encoders Solid shaft with square flange pulses per revolution
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil
6/2 way directional valve type 6/2UREM6 and 6/2URMM6
6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS 6 dm 3 up to 35 MP up to 5 /min DT SHEET - SERVICE MNU NUL WK 421 54 11.212 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...
4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
PCB plug-in connectors
Contents CB plug-in connectors.16 mm pitch.16 mm pitch Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 Male connectors with solder connection SU.16H/9 Derating
P3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class" Special features. Dimensions (in mm) B en
P3IC / P3ICP Absolute pressure trnsducer Industril Clss" Dtenbltt Specil fetures For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions Nominl (rted) pressure 10 br to 3000 br Strin
Proportional directional valves
/4 Proportionl directionl vlves 6.9 Type 4WRE nd 4WREE NG 6 nd p to r p to 8 L/min Contents Function nd configurtion Symols Ordering code Technicl dt 4 Electricl connections, plug-in connectors Integrted
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
P3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class. Special features. Dimensions (in mm) B en 1
P3IC / P3ICP Absolute pressure trnsducer Industril Clss Dtenbltt Specil fetures - For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions - Nominl (rted) pressure 10 br to 3000 br -
Operating voltage from 10 KVDC to 15 kvdc. Operating current up to 13 A. 2-5 HV contacts. For cable sizes AWG 26-14
Operating voltage from 10 KVDC to 15 kvdc Operating current up to 1 A 2-5 HV contacts For cable sizes AWG 26-14 Overview Series MC P/N Description Plug Receptacle Cable mount Panel mount Coupling HV-pins
STANDARD Signal Circular Connectors
Signal Circular Connectors 3 Ordering information signal circular connectors ll standard connectors are published in this catalog. However, this catalog does not provide customer specific designs or variations.
SINEAX C 402 Alarm unit
for DC currents or DC voltges 00 II () G Appliction The lrm unit SINEAX C40 (Figure ) is normlly pplied to monitor the limits of oth current nd voltge mesurements. The sttus of the device is signlled remotely
Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
F Series Pushbutton Switches
F Series Features/Benefits Up to 10 poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection
Safety Relay Unit. Ordering Information. Ultra Slim Safety Relay
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV
DC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor
Huell Industril Controls, Inc. 716 1600 Ampere 1500 Volt DC Contctor Ctlog 42716 Mrch 2013, Replces Septemer 2005 42716 Highlights Non-polrized rc chute (series lowout coil) design s stndrd Optionl polrized
Datasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
RockStar HighPower. Contents. RockStar HighPower Introduction C.2 C.1
ontents Introduction.2 HighPower 250 A.4 4000 V 250 A 1 4 poles HighPower 550 A.10 4000 V 550 A 1 3 poles.1 Introduction Uncompromising power in clever and safe packaging. The modular high-current connector
Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)
Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if
4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
Mechanical Fail-Safe Damper Actuator NFA
2-FON echnicl Fil-Sfe Dmper Actutor NFA ctutor emergency function for djusting ir dmpers in ventiltion nd ir conditioning systems in uildings orque Nm Nominl voltge AC 24..4V / DC 24..V Control: Open-close
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
Solenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
Powermate Range pitch 7.00 Powermate Range pitch 7.00
Contents lug and socket connectors with leaf spring connection.2 lug and socket connectors with TO connection.6.1 lug and socket connectors with leaf spring connection STVS S Derating curve STVS SB Socket
NORTH AMERICA. Catalog. RockStar Heavy Duty Connectors C A T A L O G
C T L O G 3 NORTH MERIC 2011 2012 RockStar Heavy Duty Connectors Catalog C T L O G 3 RockStar Heavy Duty Connectors Contents RockStar Heavy Duty Connectors RockStar inserts RockStar ConCept modular system
2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
Crimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
Datasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
Han ES Press. Features. Description. Removal of conductor. Size 6 B - 24 B
Size 6 B - 24 B Features Easy bridging functionality of contacts by means of plug-in jumpers directly on the connector Fast realisation of potential multiplication as well as star and delta bridges Rapid
C60H-DC C curve. Catalogue numbers
distriution systems PB104013-34 The supplementary protectors are used in direct current circuits (Industrial control and automations, transport, renewale energy...). They comine the following functions
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
EPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
Safety rope switch without reset for simple stop
afety rope switch without reset for simple stop election diagram FP 4-M2 FD 4-M2 FL 4-M2 FR 4-M2 FM 4-M2 FX 4-M2 FZ 4-M2 ACTUATOR 9 ACTUATOR 9 0 CONTACT BLOCK 1 9 21 1NO+ FP FD FL FC 33 34 CONDUIT ENTRIE
Series BHT. Specifications. B HT 6 pole + PE. B HT 10 pole + PE. B HT 16 pole + PE. B HT 24 pole + PE. Page
Inserts series B HT are made of special hih temperature resistant plastic material, suitable for temperatures up to max. 200 0 C includin natural heatin. Housins of series B HT are made of sea-water resistant
Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35
General ordering data Order No. 1608570000 Part designation 2.5/4AN Version EAN 4008190077136 Qty. 100 pc(s). Feed-through terminal,, Tension clamp connection, Wemid, Product notes Product description
EP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
Data sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX
PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90, 135 and 180. Suitable for conductor cross-sections up to 2.5 mm². 0.13-2.50 mm² (IEC) / 26-14
Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
Electrically controlled directional control poppet valve type UREZ6
LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion
C&K NE-18 Series Mains / Power Switches
C&K NE-18 Series Features/Benefits Chassis or panel mount Various buttons and illumination Various contact configurations Typical pplications Mains/power switching Consumer electronics udio equipment Digital
Amphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
Product range MEGAlife
Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.
Safety switches for hinges
Safety switches for hinges Selection diagram ACTUATORS L L6 L9 L16 FR FM FX FZ FK CONTACT BLOCKS 6 7 9 14 18 snap action 1NO+1N, make before break, shifted, close 21 4 66 NC 2NO+ 1NO+ CONDUIT ENTRIES Threaded
RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G V
Description Single and two pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics
5 mm contact pin pitch PCB or 95 series sockets
1. = 12.4 1. = 12.4 44 Series - Miniature PCB relays 6-10 A Features 44.2 44.62 2 Pole relay range 44.2-2 Pole 6 A ( mm pin pitch) 44.62-2 Pole 10 A ( mm pin pitch) PCB mount - direct or via PCB socket
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
Series S847 Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.
Snap-action switches Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.en Snap-action switches, S847 Series Dual changeover
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
Connectors according to DIN /IEC
Connetors ording to DIN 41612 /IEC 60603-2 26 ept GmH I Tel. +49 (0) 88 61/25 01 0 I Fx +49 (0) 88 61/55 07 I E-Mil sles@ept.de I www.ept.de Contents Introdution 28 Overview 30 The Stndrd 32 Derting Digrms
TP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
S and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
Han Q 1/0 Axial Screw Protected. Available February 2017
Features Compact connector based on size 3 A with a current carrying capacity of 100 A Space saving design due to an angled malemale version IP20 protected male and female contact according to IEC 60 529
4000 Series Buccaneer
Sealed to IP66 IP6 and IP69K when mated IP6 rating tested at 1.054kg/sq cm (15lb/sq in) m depth for 2 weeks, & pole configuration Power ratings up to 1A, 600V Cable range from to 7mm Diameter over coupling
Safety switches for hinged doors
4 Safety switches for hinged doors Selection diagram FR FM FX FZ FK 5 18 7 9 snap action overlapped CONTACT BLOCKS 20 21 22 33 34 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland
PROPORTIONAL DIRECTIONAL CONTROL VALVES PILOT OPERATED WITHOUT LVDT TYPICAL PERFORMANCE SPECIFICATIONS W/O LVDT, OPEN INNER LOOP MOUNTING SURFACE
ED8M PILOT OPERTED WITHOUT TYPICL PERFORMNCE SPECIFICTIONS W/O, OPEN INNER LOOP MOUNTING SURFCE NFP/T3.5.1M R1-1984 D8 (Formely D6) NSI/B93.7M-1986 ISO SIZE 8 These proportional directional control valves
Magnetic Overcurrent Circuit Breaker
Magnetic Overcurrent Circuit Breaker 808-... Description ngle pole miniaturised magnetic circuit breakers with unique highspeed operating mechanism and push/pull on/off manual actuation. Fitted with electrically
4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Switches Features/Benefits Up to 10 poles per module Various contact terminals
Safety rope switches with reset for emergency stop
Safety rope switches with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+ FP FD FL FC 22 33 34 LED signalling light CONDUIT ENTRIES For other available
JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
EPIC. Connector Accessories CONNECTOR ACCESSORIES. Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands
CONNECTOR ACCESSORIES Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands D Series Pressure Screws 413 U Series Washers 413 Sealing Rings 413 Neoprene & Viton Concentric Sealing
HBE 24 SCREW & CRIMP TERMINATED INSERTS
1 HBE 24 SCREW & CRIMP TERMINATED INSERTS SCREW TERMINATED View from Cable Side CRIMP TERMINATED Panel Cut-Out Contacts Sold Separately These inserts fit in the HBE 24 Series Housings which are on the
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
2 pole, 10 A power contacts 8 pin plug-in CO (DPDT) 3 CO (3PDT) Rated current/maximum peak current
0 Series - General purpose relays - 0 Features 0. 0. Plug-in mount 0 General purpose relay & pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils UL Listing (certain relay/socket
Datasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data
Datasheet Art.No. 57.504.0055.6 Feed-through terminal WK 4 / U BLUE /V0 Feed-through DIN rail terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 4 mm², width 6
Multi-pole terminal strips
Contents for direct mounting Screw connection.2 Screw connection ATEX approval.6.1 for direct mounting Screw connection MK 2/12 2.5 MK 3/2...12 2.5 Width/Height/ø mounting hole Length / mounting dimensions
40 Series - Miniature PCB relays A. Features
1. = 12.4 1. = 12.4 1. = 12.4 40 Series - Miniature PCB relays 8-10 - 16 A Features 40.31 40.1 40.2 1 & 2 Pole relay range 40.31-1 Pole 10 A (3. mm pin pitch) 40.1-1 Pole 10 A ( mm pin pitch) 40.2-2 Pole
Safety rope switch with reset for emergency stop
Safety rope switch with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+,, FP FD FL FC 22 33 34,, CONDUIT ENTRIES Threaded conduit entries (standard) With
Female socket block, Screw connection, No. of poles: 12, Width: mm, Colour: Green
Female socket block, Screw connection, No. of poles: 12, Width: 45.72 mm, Colour: Green Business data Connector version Free connector Packaging unit 50 Quantity unit PC Packaging type Carton Type of banding
2 pole 10 A PCB mount A1 A
Series - Miniature general purpose relays - 0 A Features Printed circuit mount, general purpose, & Pole relays. - Pole 0 A. - Pole 0 A. - Pole A AC coils & DC coils Cadmium Free contacts (preferred version)
DBL distribution blocks 3x1 pole
TECHNICAL DATASHEET 1SNC166019D0201 - CATALOGUE PAGE 1SNC166020S0201 DBL distribution blocks 3x1 pole 84.6 3.33" 25 0.98" 32.5 1.28" 28.2 1.11" 23.5 0.93" 14.7 0.58" 36.3 1.43" 75 2.95" 62 2.44" 50.7 2"
JS Series Sub-Miniature Slide Switches
Su-Miniture Switches Fetures/enefits Positive detent Low profile IR reflow to 60º solder profile Surfce nd thru hole mounting, DPDT, DPT models RoHS complint Typicl pplictions Telecommuniction products
Data sheet... W-Series WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² WPE 4N). General ordering data Order No. 1010100000
BIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
Cobra. Mighty Mouse TECHNICAL SPECIFICATIONS
Mighty Mouse Cobra TECHNICL SPECIICTIONS 0-0 triple-start with self-locking coupling nut, exploded view How To Order Mighty Mouse Cobra Plug Connector and ackshell ssemblies Sample Part Number 0-0-2 ZNU
Thermal Overcurrent Circuit Breaker 3130
Thermal Overcurrent Circuit Breaker 330 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 60934) of compact design for snap-in panel mounting.