Thermal Overcurrent Circuit Breaker 3130

Transcription

1 Thermal Overcurrent Circuit Breaker 330 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 60934) of compact design for snap-in panel mounting. Available either with protection on one/both/all poles or, in the case of the double pole version, protection on one pole only. Illumination is optional and there is a choice of rocker colours. Approved to CBE standard EN (IEC 60934) Typical applications Motors, transformers, solenoids, household and office machines, electrical tools, mobile homes, boating, construction vehicles. Ordering information - pole Type No. 330 rocker switch/circuit breaker Mounting F snap in frame Frame standard 3 special single pole version Number of poles single pole, thermally protected A pole, unprotected Frame mounting mm (only 330-F..-...).5-3. mm (only 330-F3.-...) Terminal design P7 blade terminals DIN 4644-C-Ms-S (QC x.0) H7 for terminals.,. 3. terminal screws M 3,5 for terminals.,., 3. blade terminals (QC x.0) N7 blade terminals (QC x.0), with shunt terminal Characteristic curve T thermal, I N Q switch, only with terminal design -N7 Switch style W rocker, one-piece, rounded profile U momentary switch function Switch colour designation opaque translucent 0 black white 0 white 4 red 04 red 9 green 09 green 9 black, rocker with green dot Rocker markings A dot ( position) Q "I" and "O" moulded in Rocker illumination. Q Y white rocker, yellow LED, AC/DC. 4 Q R red rocker, red LED, AC/DC. 9 Q Y green rocker, yellow LED, AC/DC. 9 A G black rocker with dot, green LED Illumination voltage range* 4-7 V (G, R, Y) 0-4 V (G, R, Y) V (G, R, Y) V (R, Y) V (R**, Y**) V (R**, Y**) X LED, DC 8-0 ma Current ratings A 330 pole 3 pole water splash protected (IP 66) Technical data Voltage rating AC 40 V; 3 AC 45 V; DC 50 V (AC 50 V; 3 AC 50 V; DC 50 V UL/CSA) Current ratings A pole A and 3 pole Typical life 30,000 operations at I N, and 3 pole 50,000 operations at I N, pole Ambient temperature C ( F) Insulation co-ordination Rated impulse Pollution (IEC and A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC and 60664A) Test voltage operating area AC 3,000 V current path/current path AC,500 V Insulation resistance >00 MΩ (DC 500 V) Interrupting capacity I cn 0... A 0 x I N A 50 A pole A 50 A pole.5... A 50 A 3 pole A 30 A 3 pole Interrupting capacity I N 0... A A (UL 077) + pole AC 50V/3500A AC 50V/3500A 3 pole 3AC 50V/5000A + pole DC 50V/000A DC 50V/000A Degree of protection operating area IP 40 (IEC 6059/DIN 40050) terminal area IP 00 Vibration 5 g ( Hz), ±0.38 mm (0-57 Hz) to IEC , Test Fc 0 frequency cycles/axis Shock pole: 5 g ( ms) + 3 pole: 0 g ( ms) to IEC , Test Ea Corrosion 96 hours at 5 % salt mist, to IEC , Test Ka Humidity Mass 40 hours at 95 % RH, to IEC , Test Ca approx. 45 g (three pole) approx. 3 g (double pole) approx. 7 g (single pole) F P7 T - W Q B 7-5 A ordering example * N/A for non-illuminated version ** Single pole version only Packaging quantity: pole 50 pcs All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. Issue F Germany (0 9 87) USA (847) UK (096)

2 Thermal Overcurrent Circuit Breaker 330 Ordering information - multipole Type No. 330 rocker switch/circuit breaker multipole Mounting F snap in frame Frame standard Number of poles pole, thermally protected 3 3 pole, thermally protected 5 pole, thermally protected on one pole only 6 3 pole, thermally protected on two poles only B pole, unprotected C 3 pole, unprotected Frame mounting mm (only 330-F..-...) Terminal design P7 blade terminals DIN 4644-C-Ms-S (QC x.0) (curve T) H7 for terminals.,. 3. terminal screws M 3,5; for terminals.,., 3. blade terminals (QC x.0) (curve T) N7 blade terminals DIN 4644-C-Ms-S (QC x.0), with shunt terminal (curve Q) Characteristic curve T thermal, I N Q switch, only with terminal design -N7 Switch style W rocker, one-piece, rounded profile U momentary switch Switch colour designation opaque translucent 0 black white 0 white 4 red 04 red 9 green 09 green Rocker markings Q "I" and "O" moulded in Rocker illumination B filament ( AC/DC 48 V), neon ( AC 5 V) G green LED, DC R red LED, DC Y yellow LED, DC Illumination voltage range* 4-7 V (B, G, R, Y) 0-4 V (B, G, R, Y) V (B, G, R, Y) V (B, R, Y) V (B, R, Y) V (B, R, Y) V (B) Current ratings A F P7 T - W Q B 7-5 A ordering example * N/A for non-illuminated version Packaging quantities: pole 35 pcs 3 pole 5 pcs Illumination voltage/power consumption operating voltage power consumption filament/neon LED 6 V 60 ma 9 ma V 0 ma 9 ma 4 V 0 ma 9 ma 48 V 0 ma,5 ma 5 V < ma < ma* 30 V < ma < ma* 45 V < ma *** * single pole version only *** not available Ordering information - IP 66 Type No. 330 rocker switch/circuit breaker Mounting F snap in frame Frame splash water protected Number of poles single pole, thermally protected A pole, unprotected Frame mounting -3.5 mm Terminal design P7 blade terminals DIN 4644-C-Ms-S (QC x.0) (curve T) H7 for terminals. terminal screws M 3.5 for terminals. x.0 blade terminals (curve T) N7 blade terminals DIN 4644-C-Ms-S (QC x.0), with shunt terminal or for switch only (curve Q) Characteristic curve T thermal, I N Q switch, only with terminal design -N7 Switch style S 00 without actuator rocker X must be ordered separately. Available symbols see following pages. S rocker, rounded profile P momentary switch Switch colour designation (not S00) opaque translucent 0 black white 0 white 4 red 04 red 9 green 09 green Switch markings 0 without actuator Q "I" and "O" moulded in Switch illumination. Q Y white rocker, yellow LED, AC/DC. 4 Q R red rocker, red LED, AC/DC. 9 Q Y green rocker, yellow LED, AC/DC S 00 0 Y without rocker, LED yellow, AC/DC Illumination voltage range* 4-7 V (R, Y) 0-4 V (R, Y) V (R, Y) V (R, Y) V (R, Y) V (R, Y) X LED, DC 8-0 ma without series resistor and diode, to be selected by customer. Recommendation: 4-7 V Rv 0,43 kω 0-4 V Rv, kω 0-8 V Rv,7 kω Diode N4007 Current ratings A F - P7 T - S Q Y 7-5 A ordering example * N/A for non-illuminated version 86 Germany (0 9 87) USA (847) UK (096) Issue F

3 Thermal Overcurrent Circuit Breaker 330 Standard current ratings and typical internal resistance values Typical time/current characteristics Current Internal rating resistance per pole (A) (Ω) Approvals Current Internal rating resistance per pole (A) (Ω) <0.0 <0.0 4 <0.0 6 <0.0 8 <0.0 0 <0.0 Multi-pole types: all poles symmetrically ed. With single pole over, thermal tripping will be at approx..54 x I N with pole devices and at approx..68 x I N with 3 pole devices. Trip time in seconds 0... A C +40 F +3 C F -30 C - F Authority Voltage rating Current rating VDE (EN 60934) AC 40/45 V A single pole A multi pole DC 50 V A single pole A multi pole DC 8 V A single pole UL, CSA AC 50 V, DC 50 V A and pole 3 AC 50 V 0... A 3 pole Semko AC 40 V, DC 8 V A and pole 3 AC 45 V 0... A 3 pole Internal connection diagrams pole line pole switch line A pole A and 3 pole times rated current +60 C +40 F +3 C F -30 C - F pole lamp lamp pole momentary switch Trip time in seconds 00 0 line.i line. lamp times rated current 3 pole line.i 3.I pole momentary switch line.i The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F C Multiplication factor Issue F Germany (0 9 87) USA (847) UK (096)

4 330-F switch only terminal for illumination conductor size 0.4 mm (AWG6), length 80 mm (7.09 in.) blade terminals DIN 4644-C-Ms-S (QC x.0 P7 or N7) Side view R3 illuminated dot flat head screw M3.5x5 -MS ISO 580 (H7) tightening torque max. 0.8 Nm mm ( in.) ±0. ±.004 Panel cut-out < min..5 min I blade terminals DIN 4644-C-Ms-S (QC x.0 P7 or N7) Side view R3 flat head screw M3.5x5 -MS ISO 580 (H7) tightening torque max. 0.8 Nm Panel cut-out 36.4 optional illumination Edges of working parts: DIN mm ( in.) ±0. ± < min..5 min Germany (0 9 87) USA (847) UK (096) Issue F

5 Thermal Overcurrent Circuit Breaker 330 Installation drawing 330-F... Dimensions 330-F-... When installing the circuit breaker apply pressure on bezel only operating area terminal for illumination flying lead conductor size 0.4 mm, length 80 mm (7.09 in.) blade terminals DIN 4644-C-Ms-S (QC x.0 P7 or N7) 3.6 Side view mounting area flat head screw M3.5x5 -MS ISO 580 (H7) tightening torque max. 0.8 Nm Panel cut-out sharp edged min..5 ±0. Splash cover, transparent, for 3 pole version X 58 0 (IP 54), comprising bezel Y and transparent cover Y illuminated trip indication (optional) mm (-.38 in.) R Installation drawing 330-F ø ø ø Edges of working parts: DIN mm This is a metric design and millimeter dimensions take precedence ( inch) Issue F Germany (0 9 87) USA (847) UK (096)

6 Thermal Overcurrent Circuit Breaker 330 Accessories Rocker X 08.. How to exchange rockers Blanking piece (black) Symbols/legends available Interior light Anchor light symbol X 088 GERMANY X X Caution! Use care not to damage the seal GERMANY Panel cut-out sharp edged mm (-.38 in.) ±0. ± <.00 min..5 min.059 Cockpit light Navigation light X X VHF radio X Edges of working parts: DIN 6784 Refrigerator X Anchor X Windshield wiper X Bilge pump X Potable water X Horn X 088 Ventilation fan X 088 Panel light X Navigation instruments NAV X Music X Heating X Shower pump X X icebox Ice X Further symbols upon request. mm This is a metric design and millimeter dimensions take precedence ( inch ) 90 Germany (0 9 87) USA (847) UK (096) Issue F