Series BHT. Specifications. B HT 6 pole + PE. B HT 10 pole + PE. B HT 16 pole + PE. B HT 24 pole + PE. Page
|
|
- Merry Hines
- 6 years ago
- Views:
Transcription
1 Inserts series B HT are made of special hih temperature resistant plastic material, suitable for temperatures up to max C includin natural heatin. Housins of series B HT are made of sea-water resistant die-cast aluminium alloy. The seals are made of Viton and are temperature resistant up to 250 C. The lockin levers are of corrosion resistant stainless steel. The housins of series B HT can also accommodate inserts of other series. This solution is applicable if there are no difficulties with reard to heat but where hih-quality aluminium die-cast has to be used because of the harsh environmental application area. 148
2 Series BHT Specifications Reulations: DIN VDE 0627, DIN VDE 01, DIN EN Number of poles: 6,, 16, 24 + PE B HT 6 pole + PE Pae Electrical data acc. to DIN EN : Rated current Rated voltae Rated sure Pollution deree 16 A 400 V 4 kv 3 B HT pole + PE Material: Hih temperature resistant Temperature rane: Up to C Mechanical operatin life matin cycles: > 500 Contacts Material: copper alloy Surface: hard silver-plated 3 µm A Contact resistance: < 1 m Ω Screw terminal : 2,5 mm² (14 AWG) Torque/testin torque: 0,5 Nm Housins Material: Die-cast aluminium Surface: Powder coated Levers for double lockin system: Stainless steel Levers for sinle lockin system: Stainless steel Housin asket: Viton Temperature rane: Up to C Protection deree acc. to DIN EN in closed position IP 65 B HT 16 pole + PE B HT 24 pole + PE Application hint: Heavy duty connectors are electrical devices which under proper use - under load - should not be inserted or separated
3 Description Part No. Series B HT 6 P + 16 A / 400 V Screw terminal inserts B HT 6 Female insert 7 6 HT Male insert HT Contact arranement B: Female insert S: Male insert panel cut out view from termination side B S
4 Description Part No. Series B HT P + 16 A / 400 V Screw terminal inserts B HT Female insert 7 1 HT Male insert 7 2 HT Contact arranement B: Female insert S: Male insert panel cut out view from termination side B S
5 Series B HT 16 P + Description Part No. 16 A / 400 V Screw terminal inserts B HT 16 Female insert HT Male insert HT Contact arranement panel cut out view from termination side B: Female insert S: Male insert B S
6 Series B HT 24 P + Description Part No. 16 A / 400 V Screw terminal inserts B HT 24 Female insert HT Male insert HT Contact arranement panel cut out view from termination side B: Female insert S: Male insert B S
7 Description Part No. M Series B HT 6 Housins: sinle lockin system Wall mount housins, heiht 52 mm with sinle lockin system OV 1 x 1. screw plu / OV 2 x Panel housin, heiht 27 mm with sinle lockin system panel cut out 52 x 35 mm Coupler hood, heiht 51,5 mm with sinle lockin system OV 1 x Hood, heiht 43 mm for sinle lockin system side cable entry OV 1 x Hood, heiht 40 mm for sinle lockin system OV 1 x Housins also suitable for inserts / contact carriers of series B 6 and DD Matchin screw-mountable hoods see pae
8 Description Part No. M Series B HT Housins: double lockin system Wall mount housins, heiht 52 mm with double lockin system OV 1 x 1. screw plu / OV 2 x Panel housin, heiht 27 mm with double lockin system panel cut out 65 x 35 mm Coupler hood, heiht 51,5 mm with double lockin system OV 1 x Hood, heiht 52 mm for double lockin system side cable entry OV 1 x Hood, heiht 45 mm for double lockin system OV 1 x Housins also suitable for inserts / contact carriers of series B and DD Matchin screw-mountable hoods see pae
9 Description Part No. M Series B HT 16 Housins: double lockin system Wall mount housins, heiht 68 mm with double lockin system OV 1 x M M 25 screw plu / 2. M OV 2 x M Panel housin, heiht 27 mm with double lockin system with recess for labels (clips) panel cut out 86 x 35 mm Coupler hoods, heiht 80 mm with double lockin system OV 1 x M OV 1 x M 32 M 25/32 <45> Hood, heiht 65 mm for double lockin system side cable entry OV 1 x M 25 M Hood, heiht 65 mm for double lockin system OV 1 x M 25 M Housins also suitable for inserts / contact carriers for series B 16, BA 6, D 40 and DD Matchin screw-mountable hoods see pae
10 Description Part No. M Series B HT 24 Housins: double lockin system Wall mount housins, heiht 68 mm with double lockin system OV 1 x M M 25 screw plu / 2. M OV 2 x M Panel housin, heiht 27 mm with double lockin system with recess for labels (clips) panel cut out 112 x 35 mm Coupler hoods, heiht 80 mm with double lockin levers OV 1 x M OV 1 x M 32 M 25/32 <45> Hoods, heiht 76 mm for double lockin system side cable entry OV 1 x M 25 M 25/32 <45> OV 1 x M Hoods, heiht 76 mm for lockin levers OV 1 x M 25 M 25/32 <45> OV 1 x M 32 Housins also suitable for inserts / contact carriers of series B 24, D 64 and DD Matchin screw-mountable hoods see pae
Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
More informationContents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
More informationHan K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/
Han K 3/0, K 3/2 / Han HC Contents Page Technical characteristics Han K 3/0, Han K 3/2... 14.02 Inserts Han K 3/0, Han K 3/2... 14.03 Hoods/Housings Han 24 HPR for Han K 3/0, Han K 3/2... 14.04 Technical
More informationHan-Power Energy Bus Components
HARTING Electric Han-Power Energy Bus Components People Power Partnership Han Data Sheet 0080-7 Han-Power T Han-Power T Part-Number Drawing Dimensions in mm 09 12 008 4701 Cable gland please order separately
More informationPROCON Industrial Connectors. CEEtyp Plugs and Sockets. PROCON Industrial Connectors. E-Mobility Infrastructure Power Distributors for Outside Areas
CEEtyp Plus and Sockets PROCON Industrial Connectors EMobility Infrastructure Power Distributors for Outside Areas PROCON Industrial Connectors 204 MADE IN GERMANY PROCON Industrial Connectors 204 nternational
More informationHints. 1) Han-Modular Inserts. See: HARTING Industrial Connectors Han, chapter 06. 2) Han-HC contacts
Features Split hood for easy assembly Separate assembly panels for Han HC Modular and Han-Modular offer variable mounting options Hood and surface mounted housing with external PE termination Ideal as
More informationD-Sub adapter Cable entry protection with metric cable entries Cable entry protection with Pg cable entries
Contents Page D-Sub adapter... 40.02 Han Split Hood... 40.04 Cable entry protection with metric cable entries... 40.06 Cable entry protection with Pg cable entries... 40.08 Coding for Hoods/Housings and
More informationRockStar HighPower. Contents. RockStar HighPower Introduction C.2 C.1
ontents Introduction.2 HighPower 250 A.4 4000 V 250 A 1 4 poles HighPower 550 A.10 4000 V 550 A 1 3 poles.1 Introduction Uncompromising power in clever and safe packaging. The modular high-current connector
More informationEPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
More informationHEAVY DUTY CONNECTORS FOR INDUSTRIAL APPLICATIONS FAST CHECK
HEAVY DUTY CONNECTORS FOR INDUSTRIAL APPLICATIONS FAST CHECK MULTIPOLE INDUSTRIAL CONNECTORS AND ALUMINIUM ENCLOSURES FOR INDUSTRIAL APPLICATIONS Molex offers a wide range of Heavy Duty Connectors: inserts,
More informationHeavy Duty ConnectorS. Fast Check
Heavy Duty ConnectorS FOR INDUSTRIAL APPLICATIONS Fast Check multipole industrial connectors and Aluminium Enclosures for industrial applications Molex offers a wide range of Heavy Duty Connectors: inserts,
More informationHK-003,HC SERIES HK-003 HCSERIES. Modular Heavy-current connector WAIN 12-01
HK-00, SERIES HK-00 SERIES Modular Heavy-current connector 12-01 HK-00/0HK-00/2 Heavy-current inserts HE-006 HK-00 Technical characteristics Specifications Approvals Inserts Number of contacts Electrical
More informationAmbient temperature compensation (-40F to +1400F) Phase loss sensitivity protection, Current unbalance sensitivity.
www.we.net Thermal Overload Relays - RW Series Rated for the new industry RW overload relays are an important part of WEG rane of products. s usual in WEG products, an extended operational service life
More informationGeneral characteristics
Multipole Industrial Connectors General characteristics The multipole connectors for industrial purposes are used in electric and electronic machinery, robots, electric panels, control equipments and wherever
More informationHan Q 1/0 Axial Screw Protected. Available February 2017
Features Compact connector based on size 3 A with a current carrying capacity of 100 A Space saving design due to an angled malemale version IP20 protected male and female contact according to IEC 60 529
More informationEPIC CIRCON M23 Series
CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland provides strain relief,
More informationStandard Hoods/Housings Han B Size 24 B
Standard / Han B Size 24 B Metal hoods/housings for industrial applications / 2 lever locking system 19 30 024 1521 1 x 25 19 30 024 1522 1 x 32 19 30 024 0527 1 x 32 19 30 024 0528 1 x 40 angled entry
More informationModula Plus. Technical documentation Ver 1.01
Modula Plus Technical documentation Ver 1.01 Table of contents Introduction Overview 2 General characteristics Main characteristics 4 Functional sements of a column 6 Main components of a functional 8
More informationJIGO JIGO HEAVY DUTY CONNECTORS HEAVY DUTY CONNECTOR 6 POLE (JG-HE-006)
HEAVY DUTY CONNECTORS HEAVY DUTY CONNECTOR 6 POLE (JG-HE-006) APPLICATIONS Heavy-duty connectors are used wherever there is a need for a secure, simple and timesaving assembly of machinery and facilities.
More informationEPIC. Connector Accessories CONNECTOR ACCESSORIES. Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands
CONNECTOR ACCESSORIES Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands D Series Pressure Screws 413 U Series Washers 413 Sealing Rings 413 Neoprene & Viton Concentric Sealing
More informationDirectory chapter 08. InduCom Robust and EMI protected D-Sub interfaces
Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................
More informationHan ES Press. Features. Description. Removal of conductor. Size 6 B - 24 B
Size 6 B - 24 B Features Easy bridging functionality of contacts by means of plug-in jumpers directly on the connector Fast realisation of potential multiplication as well as star and delta bridges Rapid
More informationCATALOG. Pos-E-Kon power, connection & control Wire pin & sleeve connectors
CATALOG Pos-E-Kon power, connection & control Wire pin & sleeve connectors Thomas & Betts is now ABB Installation Products, but our long legacy of quality products and innovation remains the same. From
More informationC&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More informationPos-E-Kon Wire Pin & Sleeve Connectors
In this section... Pos-E-Kon Wire Pin & Sleeve Connectors Pos-E-Kon Wire Pin & Sleeve Connectors Overview... G-106 G-115 A Series 16 Amps 600VAC... G-116 G-117 B Series 16 Amps 600VAC... G-118 G-121 C
More informationShell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
More information- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
More informationMotor starters up to 150 A
Contents Motor starters up to 50 A TeSys GV, GV3 and GV7 motor circuit-breakers b Thermal-manetic circuit-breakers Selection uide.............................................. pae 30 v Presentation.............................................
More information10 Load and Motor Switchgear
10 Load and Motor gear Safety es 01941E00 Safety switches ensure the obligatory isolation of electrical power under condition of equipment cleaning, maintenance and repair. Other methods of isolation,
More informationTransforming customer wishes into concrete solutions
HARTING News 2015 HARTING worldwide Transforming customer wishes into concrete solutions 2 The HARTING Technology Group is skilled in the fields of electrical, electronic and optical connection, transmission
More informationreliable economical general characteristics
general characteristics reliable economical inserts in light technopolymer tinned precision contacts enclosures in die-cast aluminum alloy vertical safety closing levers in zinc-plated steel 1 JNE inserts
More informationHEAVY DUTY MULTIPOLE CONNECTORS
HEAVY DUTY ULTIPOLE CONNECTORS Inserts 24 poles+ 16A max-600v Screw Terminal with wire protection OE E24RS female inserts CNE 24 T E24PS male inserts CNE 24 T Cage Clamp OE E24RG female inserts CSE 24
More informationDatasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
More informationFL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
More informationBALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationMotor circuit-breakers TeSys GV2, GV3 and GV7. Catalogue July
Motor circuit-breakers TeSys GV2, GV3 and GV7 Cataloue July 06 This international site allows you to access all the Telemecanique products in just 2 clicks via comprehensive rane data-sheets, with direct
More informationHARTING Industrial Connectors Han Short Form Catalogue
HARTING Industrial Connectors Han Short Form Catalogue HARTING Worldwide Transforming customer wishes into concrete solutions The HARTING Technology Group is skilled in the fields of electrical, electronic
More informationHEAVY DUTY MULTIPOLE CONNECTORS
HEAVY DUTY MULTIPOLE CONNECTORS Inserts Series E 16 poles+ 16A max-600v Screw Terminal with wire protection OEM E16RS female inserts CNEF 16 T E16PS male inserts CNEM 16 T Cage Clamp OEM E16RG female inserts
More informationShort Stroke Transducer potentiometric 10 mm up to 150 mm. Series T / TS Series TR / TRS
Short Stroke Transducer potentiometric 10 mm up to 150 mm Series T / TS Series TR / TRS Compact transducer with proven conductive-plastic technoloy. The model with push rod and ball couplin enables a backlashand
More informationDN9C. Up to 9 contacts 30 A / 415 V max. IP54/IP55 Metal page 74. Up to 7 contacts 25 A / 500 V max. IP66/IP67 GRP or metal page 72
PN7C DN9C PN12C Up to 7 contacts 25 A / 500 V max. GRP or metal page 72 Up to 9 contacts 30 A / max. IP54/IP55 Metal page 74 Up to 12 contacts 16 A / 480 V max. GRP or metal page 76 70 RANGE SIGNAL & CONTROL
More informationProduct features & Overview. N1 - N4 A Rotary and part-turn actuators
Product features & Overview N1 - Rotary and part-turn actuators 20 N1 - Rotary and part-turn actuators Rotary and part-turn actuators Product features Wide torque range Wide selection of output shafts
More informationELECTRO-PNEUMATIC CONTROL VALVES
WWW.CROUZETCONTROL.COM 7 PNEUMATICS PRODUCTS ELECTROPNEUMATIC CONTROL VALVES WWW.CROUZETCONTROL.COM 8 PNEUMATICS PRODUCTS WWW.CROUZETCONTROL.COM 9 PNEUMATICS PRODUCTS Miniature solenoid valves for alternatin
More informationAccessories for bus connection DeviceNet, CANopen and Modbus-RTU
FBP FieldBusPlug V6 Accessories for bus connection DeviceNet, CANopen and Modbus-RTU V6 FieldBusPlug Accessories for bus connection DeviceNet, CANopen and Modbus-RTU Contents Technical data Page DNX11-FBP.100
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CTF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Dimensions: 11.1 x 15.5 mm
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CIF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Dimensions: 18.4 x 15.5
More informationLinear actuator. Product features. Overview. Solid metal housing. Constant positioning times under fluctuating loads
Linear actuator VK Product features Constant positioning times under fluctuating loads Solid metal housing Up to four auxiliary position switches possible Maintenance-free gearbox Wide selection of valve
More informationContents. Han Q Technical characteristics Han Q 5/ Han Q 5/ Technical characteristics Han Q 7/
Cntents Page Technical characteristics 5/0.............................. 13.10 5/0.................................................. 13.11 Technical characteristics 7/0.............................. 13.14
More informationInformation. Page. PROCON system 190. Regulations and approvals 191. Advantages 191. Application areas 192. Housings 193. Locking systems 193
Information Page PROCON system 190 Regulations and approvals 191 Advantages 191 Application areas 192 Housings 193 Locking systems 193 Termination methods 194-195 Technical informationen 196-199 Index
More informationDatasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data
Datasheet Art.No. 57.504.0055.6 Feed-through terminal WK 4 / U BLUE /V0 Feed-through DIN rail terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 4 mm², width 6
More informationThe PROCON multipole heavy duty connector system
The PROCON multipole heavy duty connector system The rapid economic development in the fifties, especially in the construction of machines and industrial plants required a so far unknown flexibility. Permanent
More informationDM Series Miniature Illuminated Power Rocker Switches
Miniature Illuminated Power Switches Features/Benefits AMPS to AMPS Illuminated LED Positive detent RoHS compliant Typical Applications Instrumentation Industrial Office machines UL 658-1 Specifications
More informationCrimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
More informationHSB series the heavy-duty connectors
HS series the hevy-duty connectors HS series the hevy-duty connectors The HS series provides users with 3 A vi ech contct with screw connections for sfe nd relile connection. Technicl dt Stndrds / pprovls
More informationSafety switches for hinged doors
4C Safety switches for hinged doors Selection diagram CONTACT BLOCKS 18 7 9 20 overlapped 1NO+ FD FL FC 21 22 33 34 2NO+1NC 3NC CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
More informationControl Panels, Distribution Panels and Components
11 Control Panels, Distribution Panels and Components EEx d Enclosures in Light Metal or stainless steel Flexible modular design for combining enclosures Can be used in Zone 1 and Zone 2 in Zone 21 and
More informationProduct features & Overview. KA Linear actuators
Product features & Overview Linear actuators 66 Linear actuators Linear actuator Product features Wide range of force outputs Solid metal housing Large stroke range Maintenance-free gearbox Wide range
More informationLinear actuator. Product features. Overview. Wide range of force outputs. Wide selection of column adapters. Wide selection of flanges
V Linear actuator Product features Wide range of force outputs Wide selection of column adapters Large stroke range Wide selection of flanges Constant positioning times under fluctuating loads Solid metal
More information95 kw. kva. 85 kw. kva. MECC ALTE ECP34-1S Control card
QI 95 400/230 V 50HZ 1/8 Technical specifications QI 95 Voltae: 400/230 V Frequency: 50HZ Genset Imae for illustration purposes only TECHNICAL INFORMATION Standby Power (ESP) Prime Power (PRP) kva 95 kw
More informationSpecial Purpose Fuses
Special Purpose Fuses Fuses for DC voltage applications www.eti.si ETI Elektroelement d.d. Obrezija 5, SI - 111 Izlake Slovenija Tel. + 38 03 5 57 570 Faks + 38 03 5 7 077 eti@eti.si NH DC 80 V - Telecom
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationHBE 24 SCREW & CRIMP TERMINATED INSERTS
1 HBE 24 SCREW & CRIMP TERMINATED INSERTS SCREW TERMINATED View from Cable Side CRIMP TERMINATED Panel Cut-Out Contacts Sold Separately These inserts fit in the HBE 24 Series Housings which are on the
More informationDM Series Miniature 2 Pole Power Rocker Switches
Miniature 2 Pole Power Switches Features/Benefits AMPS to AMPS Quick connect terminals Double pole in miniature size Recessed bracket available prevents accidental actuation RoHS compliant Typical Applications
More informationREMA BATTERY CONNECTOR DIN 160
Productfeatures and advantages Specifically designed for the quick and opportunity charging of large battery capacities Suitable for lead gel accumulators and lithium-ion batteries Corresponds to the DIN
More informationRoHS 2002/95/EC GREEN ELECTRONICS CVF. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS CONNECTORS
More informationXMLRppp Electronic pressure switch
8 7 6 4 3 Indoor use Out 3 4 6 7 8 Fluid entry Button to scroll from a menu to another. Also button to increase a value or chane a parameter Button to display a value or a parameter. Also button to save
More informationHYDRAULIC CRIMPING TOOLS
HYDRAULIC CRIMPING TOOLS HT 51 New design two speed hydraulic tool, lightweight and compact, this tool is ideal for working in confined spaces. Having the benefit of spring loaded handles, the dies can
More informationPosition switches FD series
Position switches FD series Selection diagram 01 08 11 18 19 02 04 05 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fibber glass rod gasket sphere sphere 51 52 5 56 41 42 adjustable lever
More informationRecommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications.
Metal-Enclosed Limit Switches ENM2 Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications. Product advantages Standard switch
More informationMultipole Industrial Connectors Aluminium enclosures - Cable glands and fittings
Multipole Industrial Connectors Aluminium enclosures - Cable glands and fittings Compact catalogue For more technical details, specifications and special products please consult the Westec General Catalogue
More informationStud connection system HSK
CONTA-CONNECT system HSK The newest generation of stud terminals from CONTA-CLIP offers secure connections for all energy-transmitting applications. Depending on the conductor cross-section, stud terminals
More informationREMA BATTERY CONNECTOR DIN 80
Productfeatures and advantages Specifically designed for the quick and opportunity charging of large battery capacities Suitable for lead gel accumulators and lithium-ion batteries Corresponds to the DIN
More informationTUBE. Precise construction encourages reliable IP rating. Bi-directional light output with single light source. Choices of light distribution angles.
TUBE TUBE TUBE family is available in 4 different sizes. They are protected from the ingress of dust and water and are used in both outdoor and indoor environments. Operating with PAR, Compact Fluorescent,
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G V
Description Single and two pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationGeneral_technical_data Series
Slow-make switching element Switching system The double-break, slow-make switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The
More informationFBP PROFIBUS DP Accessories
FBP FieldBusPlug V6 FBP PROFIBUS DP V 6 PROFIBUS DP FieldBusPlug PROFIBUS DP FieldBusPlug Contents Technical data Page PDX11-FBP.100 PROFIBUS DP extension cables (lengths 1 m, 3 m, 5 m)... 4 PDF11-FBP.050
More informationSeries 20 D. Pressure switches for all-fluid technique Port sizes G 1 /4 and G 1 /2
Series 0 D Pressure switches for all-fluid technique Port sizes and Microswitch with gold-plated contacts (silver plated for outdoor variants) Plug-in connection to DIN 4650 Technical Data Fluid: Neutral
More informationSeries 858, Relay Sockets with Industrial Relay
Series 858, Relay Sockets with Industrial Relay voltage: V DC 4 changeover contacts voltage: V DC 4 changeover contacts (gold contacts) * In order to prevent the gold layer from being damaged, these values
More informationDirectory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
More informationKombiTemp. Head form B / Head form J Cable socket, angle type Diesel engine dial thermometers. Temperature Sensors with local display
JJ Head form B / Head form J JJ Cable socket, angle type JJ Diesel engine dial thermometers KombiTemp Temperature Sensors with local display Including products with: DS_KombiTemp 8/5 Dual temperature control
More informationCSF - CSM CONNECTORS. Functional characteristics. RoHS 2011/65/EU. Brief description. Dimensional class: low. Standard colour: green
- CSM Functional characteristics Dimensional class: low 0 RoHS 2011/65/EU Standard colour: green Dimensions: 14 x 11.5 mm (.551 x.453 in) 10 20 30 mm ½ 1 in Max approved wire size: solid: 2.5 mm 2 (IMQ);
More informationThrust Needle Roller Bearings Thrust Roller Bearings. Structures of Thrust Bearings. Needle roller. Cage. Cylindrical roller. Cage.
eele Roller Bearins Roller Bearins Structure an Features Bearins consist of a precisely mae cae an rollers They have hih riiity an hih loa capacities an can be use in small spaces eele Roller Bearins incorporate
More informationHDD Insert Series. Application Specification Apr 30 th, 2017 Rev. A. Table of contents
HDD Insert Series Table of contents 1. INTRODUCTION... 2 2. SUPPORTING DOCUMENTS... 2 2.1. Customer drawings... 2 2.2. Product specification... 2 2.3. Application Specification... 2 2.4. Standards... 2
More informationSafety switches for hinged doors
4 Safety switches for hinged doors Selection diagram FR FM FX FZ FK 5 18 7 9 snap action overlapped CONTACT BLOCKS 20 21 22 33 34 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland
More informationblocks Interconnection fuses &
22mm DIAMETER CONTROL SWITCHES Flush Push Buttons CCTTR p17 On/Off Push Button CCTTR0 p17 Arrow Buttons CCTTRA p17 Start/Stop Push Button Start/Stop CCTTRS p18 On/Off CCTTRO p18 40mm E-Stop Key Release
More informationgeneral characteristics
general characteristics - overview CG/G series ( 44.27, 57.27, 77.27, 104.27 ) The new CG/G series of fixed and portable enclosures for connectors combines water tightness to rating and high mechanical
More informationFemale socket block, Screw connection, No. of poles: 12, Width: mm, Colour: Green
Female socket block, Screw connection, No. of poles: 12, Width: 45.72 mm, Colour: Green Business data Connector version Free connector Packaging unit 50 Quantity unit PC Packaging type Carton Type of banding
More informationCONEC SnapLock. 1 Introduction
CONEC SnapLock 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional screwing. A spring-loaded clip integrated
More informationEPIC. Pin & Sleeve Connectors PIN & SLEEVE CONNECTORS
PIN & SLEEVE CONNECTORS Reference Pin & Sleeve Overview 461 Pin & Sleeve Products Overview 462 CEE series, MULTIMAX series, ULYSSE series, ALUPRES series Pin & Sleeve Construction 464 MULTIMAX Installation
More informationSafety switches for hinges
Safety switches for hinges Selection diagram ACTUATORS L L6 L9 L16 FR FM FX FZ FK CONTACT BLOCKS 6 7 9 14 18 snap action 1NO+1N, make before break, shifted, close 21 4 66 NC 2NO+ 1NO+ CONDUIT ENTRIES Threaded
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationHD Insert Series. Application Specification Apr 30 th, 2017 Rev. A. Table of contents
HD Insert Series Table of contents 1. INTRODUCTION... 2 2. SUPPORTING DOCUMENTS... 2 2.1. Customer drawings... 2 2.2. Product specification... 2 2.3. Application Specification... 2 2.4. Standards... 2
More informationSafety Switches Series 8537
Safety Switches www.stahl.de > 3- and 6-pole switches 12 / 16, 25, 40, 63 / 80, 125 / 160, 250, 315, 400, 500 A > Motor switching capacity AC-3 and AC-23 acc. to IEC 60947-3, EN 60947, DIN VDE 0660 part
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationMixMate series the high-capacity connectors
MixMte series the high-cpcity connectors RockStr inserts MixMte series the high-cpcity connectors MixMte integrtes xil screw contcts nd TOP connection technology in one plug-in connector. The compct design
More informationPANEL PANEL MOUNTING COMPONENTS
PANEL PANEL MOUNTING COMPONENTS For conventional wiring, Wöhner offers a comprehensive range of panel components for fastening to a DIN rail or mounting plate. The fuses and associated connection technology
More informationPowermate Range pitch 7.00 Powermate Range pitch 7.00
Contents lug and socket connectors with leaf spring connection.2 lug and socket connectors with TO connection.6.1 lug and socket connectors with leaf spring connection STVS S Derating curve STVS SB Socket
More informationSystem pro M compact Miniature Circuit Breaker SU200M for branch circuit protection acc. to UL 489
System pro M compact Miniature Circuit Breaker SU200M for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU 200 M is ABB s solution for UL 489 branch
More informationSafety rope switches with reset for emergency stop
Safety rope switches with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+ FP FD FL FC 22 33 34 LED signalling light CONDUIT ENTRIES For other available
More information