95 kw. kva. 85 kw. kva. MECC ALTE ECP34-1S Control card

Transcription

1 QI /230 V 50HZ 1/8 Technical specifications QI 95 Voltae: 400/230 V Frequency: 50HZ Genset Imae for illustration purposes only TECHNICAL INFORMATION Standby Power (ESP) Prime Power (PRP) kva 95 kw 76 kva 85 kw 68 Mechanical structure Open skid on baseframe Enine CUMMINS 6BT5.9-G2 Alternator MECC ALTE ECP34-1S Control card DEEP SEA 4620 Measures (L x W x H) mm x x Empty weiht k Fuel tank L 215 Voltaes Prime Power (PRP) Standby Power (ESP) (kva) (kw) (kva) (kw) 380/ / / Notes: PRIME POWER: Electrical power data available at a variable load without limits of hours per year. An overload of 10 % is allowed for 1 hour of every 12. In accordance with ISO 8528/1 (2005) PRP STANDBY POWER: Electrical power data at variable load in an emerency in accordance with standard ISO 8528/1 (2005) ESP. Overloads of emerency power are not allowed. The standard reference conditions are: 25 ºC, 100 kpa and 30% relative humidity. Gasoil density: 0.85 /cm3. Gasoline density: 0.68 /cm3. info@esan.com

2 2 / 8 INDEX General description Enine Alternator Bedplate Electric Panel ATS Dimensions and Weiht Performance class Reulation Annex: Drawins Grupos Electróenos Europa, S.A. is a certified company with ISO 9001, ISO 14001, OHSAS and PECAL We reserves the riht to modify any characteristic of their equipment without prior warnin. Photoraphs representin the product rane, while able to include options. Weiht and dimensions of a standard enerator set. Non-contractual document Central Offices: Políono Industrial Pitarco II; Parcela Muel (Zaraoza) Spain Tel.: Fax: info@esan.com After-sales Department: Customer service: Spare parts: info@esan.com

3 3 / 8 GENERAL DESCRIPTION Generator set for automatic operation due to a rid failure, includin the electrical operations panel, installed on a bedplate. Start-up of the enerator set will be carried out when a failure in the rid power supply is detected. Once the enerator set has stabilized, a sinal is sent to the switchin panel to switch the rid position to enerator set. When the rid power supply return is detected, a command is sent to the switchin to switch to the enerator set position of the rid. The enerator set shuts-down after the applicable coolin period has elapsed. ENGINE Cummins diesel enine, with turbo, with direct injection and Electronic reulation of the enine. Enine brand CUMMINS Bore (mm) 102 Model 6BT5.9-G2 Stroke (mm) 120 R.P.M Compression ratio 16,5:1 Net power (kwm) 87 Type of reulation Electronic Fuel Diesel Europe exhaust emission EU0 No. of cylinders 6 L EPA exhaust emission EPA0 Enine Capacity (c.c.) Coolin System Coolin of the sleeves usin coolin fluid comprised of water and lycol at 50% in a closed circuit driven by the enine pump. Enine driven exhaust fan, radiator and expansion tank; oriinal from the enine manufacturer. The circuit is completed with the coolin pure system towards the outside of the bedplate and protections of all runnin surfaces Coolin type Water Lubrication System Gear pump lubrication system driven by the enine and with oriinal enine manufacturer lubricant filterin system. It is completed with the oil pure system towards the outside of the baseframe. Oil capacity (l) 14,2 Air intake system Air intake system for combustion with turbo, filterin device and filter chane indicator; oriinals from the enine manufacturer. Intake air flow (m³/min) 6,6 Air inlet filter type Medium Exhaust System Interior and exterior aluminized steel exhaust silencer. Tª as emission (ºC) 540 Gas flow (m3/min) 18,3 info@esan.com

4 4 / 8 Start system Start system that uses an electrical motor, battery and battery chare alternator that is driven by the enine itself. The start motor and the battery chare alternator are oriinals from the enine manufacturer. Starter voltae system (V) 24 Battery type 2 x 12V 45Ah - 400A Fuel supply system Fuel intake system oriinal from enine manufacturer with filter. Fuel tank capacity (L) 215 Fuel consumption panel (rane accordin to the standard confiuration) Load Prime Power (PRP) Standby Power (ESP) (l/h) Rane (h) (l/h) Rane (h) 25% 5, % % 14,5 14,8 100% 19,3 11, info@esan.com

5 5 / 8 ALTERNATOR Mecc Alte alternator with 4 poles, with a lifetime lastin reased bearin, H class insulation, without brushes, 2/3 coil AVR (Automatic Voltae Reulator) and Protection of all the windins by means of 2-part hih quality polyester resin imprenation. The stator windins receive a double imprenation. Final finish with a coat of EG43 varnish. Excitation system with MAUX auxiliary windin with overload capacity 3 times the nominal current for 20 s. Joinin of enine and alternator throuh flexible disc couplin. Reulations: CEI 2-3 IEC 34-1 EN VDE 0530 BS CAN/CSA-C22.2 No14-68-No ISO 8528:3 Low wave distribution: THC < 4% THD < 4% THF (IEC) < 2% TIF (NEMA) < 40 Incorporates electromanetic emissions suppressor in accordance with standard VDE 0875, class K. Brand MECC ALTE Voltae Stability ±1% Model ECP34-1S Performance at 75% p.f (%) Alternator Power (kva) 95 / Standby (SB27) Performance at 100% p.f (%) Number of wires 12 Direct subtransient 7,4 reactance X"d (%) IP Alternator IP 21 Subtransient time 5,8 constant, T"d (ms) Excitation system MAUX Zero sequence reactance, 3,6 Xo (%) AVR model DSR Short-circuit ratio, Kcc 0,5 info@esan.com

6 6 / 8 BEDPLATE The enine-alternator set is coupled to the base frame by means of anti-vibration shock mounts. The fuel tank is interated and welded to the base frame. It has a drainae plu, wide cleanin cover and filler connection with plu. Includes level sensor with low fuel alarm sinal that indicates the amount of fuel available in the tank to the electrical panel. ELECTRIC PANEL Electrical panel interated in the enerator set with diital control plate. Has a ABB brand sinle-pole circuit breaker, manually actuated, with thermal-manetic protection aainst overloads and short-circuits. Battery charer DSE V 5A Has a DEEP SEA battery chare maintainer, desined to be permanently connected to the battery and maintains it chared to its maximum capacity. Has no movin parts. The charer switches to floatin mode when the chare is complete info@esan.com

7 7 / 8 Control Card DEEP SEA control plate, DSE 4620 with rid monitor that starts-up the enerator set when it detects a failure in the electrical power supply from the rid and sends a sinal to the switchin panel to switch from the rid position to the roup position. Once the power supply has been re-established, it sends an order to the switchin panel to transfer the enerator set power to the rid and shuts-down the enerator set once it has cooled down. It also starts-up the enerator set usin an external sinal. Also, control plate DSE 4620 checks a lare number of parameters of the enerator set which allows it to display information, statuses and alarms. If required, it will shutdown the enerator set: Due to hih coolant fluid temperature, low oil pressure, low coolant fluid level, etc. Includes a LCD screen with lihtin, 2 naviation menubuttons, independent operational mode buttons, and alarms and status indicatin LEDs. Communications via USB, and Completely confiurable usin a PC in Windows environment and free Scada type software in real time. Includes readin and displayin of parameters with RMS values, real time clock, events history lo up to 15 events and prorammin of alarms, events, start-ups and shutdowns. Operatin modes: START-UP, SHUTDOWN, AUTO, MANUAL AND TEST. Generator Generator voltae (L-N) Generator voltae (L-L) Generator frequency Generator current kw kva kwh kvah Power factor Grid Grid voltae (L-N) Grid voltae (L-L) Grid frequency Enine Turn speed Coolin fluid temperature Oil pressure Hour meter Battery voltae No. of start-ups Fuel level Protections Start-up fault (enerator set shutdown) Hih coolant temperature (alarm and enerator set shutdown) Low oil pressure (alarm and enerator set shutdown) Low fuel level (alarm) Low coolin fluid level (enerator set shutdown) Overload (alarm and enerator set shutdown) Battery voltae hih (alarm) Battery voltae low (alarm) Battery chare alternator failure (alarm) Generator low frequency (alarm and shutdown) Generator hih frequency (alarm and shutdown) Generator low voltae (alarm and shutdown) Generator hih voltae (alarm and shutdown) External emerency shutdown (shutdown) Enine overspeed (shutdown) Maintenance interval (alarm) info@esan.com

8 8 / 8 ATS Optional cabinet for switchin between the rid and the enerator set by means of a Socomec brand motorized switch with an interated mechanical and electrical interlockin device. Allows for the padlock lockin function. Includes a Manual / Automatic mode selector and emerency manual control. Safety switchin for isolatin the loads. Hih dynamic resistance aainst short-circuits. Position indicator with fully visualized cut-off. Stable positions not affected by chanes in voltae and mechanical vibrations. External electrical control of the positions and test sequences. Hih number of operations. IP54 protection. Connections: Lower/lower. ATS 4P 160A V L-N CCM DIMENSIONS AND WEIGHT Lenht, L (mm) Width, A (mm) Heiht, H (mm) Weiht (k) PERFORMANCE CLASS Execution class in accordance with ISO 8528/5 (2005) takin into account the behaviour of the enerator set in a permanent mode of operation with different load levels, as well as in a temporary mode of operation due to shocks in the load. Performance class G2 REGULATION The enerator set has a CE Markin that includes the followin directives: 2006/42/CE Machine Safety. 2006/95/CEE Low Voltae. 2004/108/CE Electromanetic compatibility. 97/68/CE Gases and contaminatin particles emissions. 2005/88/CE Noise emissions of machines outdoors in soundproof enerator sets. Applicable international reulations: ISO 8528 ISO 3046 BS 5000 IEC info@esan.com

9