Short Stroke Transducer potentiometric 10 mm up to 150 mm. Series T / TS Series TR / TRS

Transcription

1 Short Stroke Transducer potentiometric 10 mm up to 150 mm Series T / TS Series TR / TRS Compact transducer with proven conductive-plastic technoloy. The model with push rod and ball couplin enables a backlashand lateral force-free operation even with parallel and anular displacement of transducer and measurin direction. Characteristic for the robust desin is the double-sided support of the actuatin rod. For the sprin-loaded type, this bearin allows hih lateral forces on the tip of the rod which may occur durin scannin of cams or wede plates. The connection of these potentiometric series is done at a hih impedance voltae input or via sinal conditioner. Special features Extremely compact desin 18 x 18 mm Lon life up to 100 million movements Outstandin linearity up to ±0.075 % Repeatability to ±0.002 mm Models with push rod or sprin-loaded with internal return sprin Actuatin shaft with double-sided support Compatible to standard probe tips Insensitive to shock and vibration Optionally cable or plu connection Special ball-couplin eliminates lateral forces Hih operational speeds - up to 10 m/s Low temperature coefficient < 20 ppm/k Series TE1 with interated sinal processin for normalized outputs current or voltae in same desin see separate data sheet Inductive series LS1 in same desin see separate data sheet Applications Measurin / control technoloy Manufacturin Enineerin Woodwork machines Rivetin machines Packain machines Weldin machines Assembly / Test devices Medical appliances Buildin technoloy Pae 1

2 Contents Mechanical data 3 Dimension drawin 4 Technical data 5 Orderin specifications 6 Accessories M16 connector system 7 Sensor mountin 9 Sinal processin 9 Pae 2

3 Mechanical Data Description Housin aluminum AlMSi, anodized Mountin adjustable clamps 2 x Z-45 and 4 x cylinder screw M4x10 (included in delivery) Actuatin rod stainless steel AISI 303, sprin-loaded type: with anti-twist safeuard, internal thread M2.5x6 Ball couplin for push rod type hardened ball with sprin pressure on carbide plate (included in delivery) Probe tip for sprin-loaded type stainless steel with external thread M2.5 and pressed-in hardened metal ball (included in delivery) Bearins double-sided DU lide bearins Resistance element conductive-plastic Wiper precious metal multi-finer wiper, elastomer damped Electrical connections Series T / TR Series TS / TRS 3-pole cable, PVC insulated, 0.14 mm² (AWG 26), shielded, 2 m lenth 5-pin connector M16x0.75 (IEC 130-9), other connectors on request Mechanical Data Maximum permitted torque for mountin screws 140 Ncm Push rod type T/TS-0025 T/TS-0050 T/TS-0075 T/TS-0100 T/TS-0150 Housin (dimension A) mm Mechanical stroke (dimension B) ±1.5 mm Maximum operational speed 10 m/s Weiht with cable with connector Weiht of shaft with couplin and wiper Operatin force (horizontally) < 0.30 N Max. displacements of ball couplin ±1 mm parallel offset, ±2.5 anular offset Sprin-loaded type TR-0010 TR/TRS-0025 TR/TRS-0050 TR/TRS-0075 TR/TRS-0100 Housin (dimension A) mm Mechanical stroke (dimension B) ±1.5 mm Flane nut SW-10 (dimension C) mm Excess lenth of push rod in end position (dimension D) mm Weiht with cable with connector Weiht of shaft with wiper Operatin force extended (horizontally) Operatin force retracted (horizontally) < 3.5 < 5.0 < 2.5 < 5.0 Operatin force to end stop max. 5 N Operatin frequency (maximum) * Hz Environmental Data Operatin temperature C Operatin humidity rane (no condensation) % R.H. Vibration (IEC ) Amax = 0.75 amax = 20 Shock (IEC ) Life > 100x10 6 movem. Protection class (DIN EN 60529) IP < 2.5 < < 2.5 < < 2.5 < 5.0 N N Hz mm ms *) Data refer to critical application probe tip upwards Pae 3

4 Dimension drawin Push rod type - cable outlet Series T Push rod type - connector outlet Series TS Sprin-loaded type - cable outlet Series TR Sprin-loaded type - connector outlet Series TRS BN RD OG Schematic CAD data see Pae 4

5 Technical data Electrical Data Push rod type Sprin-loaded type TR-0010 T/TS-0025 TR/TRS-0025 T/TS-0050 TR/TRS-0050 T/TS-0075 TR/TRS-0075 T/TS-0100 TR/TRS-0100 T/TS-0150 Defined eletrical rane mm Electrical stroke mm Nominal resistance kω Resistance tolerance 20 ±% Independent linearity < ±% Repeatability < ±mm Recommended operatin wiper current < 1 μa Maximum wiper current in case of malfunction 10 ma Maximum permissible applied voltae V Effective temperature coefficient of the typ. 5 ppm/k output-to-applied voltae ratio Insulation resistance (500 VDC) Dielectric strenth (500 VAC, 50 Hz) > 10 MΩ < 100 μa Important All values specified in this data sheet for linearity, lifetime and temperature coefficient are only valid for a sensor used as a voltae divider with virtually no load applied to the wiper (le < 1 μa). Pae 5

6 Orderin Specifications Orderin specifications Push rod type T-0025 TS-0025 T-0050 TS-0050 T-0075 TS-0075 T-0100 TS-0100 T-0150 TS-0150 P/N Available on request Push rod type P/N independent linearity T TS T TS T TS T TS T TS T TS Sprin-loaded type Sprin-loaded type TR TR TRS TR-0025 TRS TR TRS TR-0050 TRS TR TRS TR-0075 TRS TR TRS TR-0100 TRS TR TRS Pae 6

7 Accessories system M16 1 = red 2 = black 3 = yellow 4 = blue 5 = white 6 = reen 1 = red 2 = black 3 = yellow 4 = blue 5 = white 6 = reen 6-pin, straiht, with molded cable, 2 m lenth, shielded, IP67, open ended PUR Cable sheath PUR; Ø max. 6 mm, C (moved) C (fixed) Wires PVC, 6 x 0.25 mm 2 Type EEM 33-26, P/N This couplin can can be used in combination with 5-pin M16 connectors. Than pin 6/ reen is open. 6-pin, anled, with molded cable, 2 m lenth, shielded, IP67, open ended PUR Cable sheath PUR; Ø max. 6 mm, C (moved) C (fixed) Wires PVC, 6 x 0.25 mm 2 Type EEM 33-27, P/N This couplin can can be used in combination with 5-pin M16 connectors. Than pin 6 / reen is open. 5-pin, straiht, with couplin nut, solder terminal, IP40, shielded For wire aue Type EEM 33-71, P/N CuZn (Brass, nickel plated) -40 C C mm, max mm² 5-pin, straiht, with couplin nut, solder terminal, IP67, shielded For wire aue Type EEM 33-76, P/N CuZn (Brass, nickel plated) -40 C C mm, PG7 max mm² Pae 7

8 Accessories system M16 5-pin, anled, with couplin nut, solder terminal, IP40, not shielded For wire aue Plastic PA -40 C C mm, max mm² Type EEM 33-72, P/N pin, anled, with couplin nut, solder terminal, IP67, shielded CuZn (Brass, nickel plated) -40 C C For wire aue mm, PG 7 max mm² Type EEM 33-77, P/N pin, straiht, with couplin nut, solder terminal, IP67, not shielded For wire aue Plastic PA -40 C C mm, max mm² Type EEM 33-70, P/N Protection class IP40 (DIN EN60529) Very ood Electromanetic Compatibilty (EMC) and shielded systems Protection class IP67 (DIN EN60529) UL - approved Note: The protection class is valid only in locked position with its plus. The application of these products in harsh environments must be checked in particular cases. Pae 8

9 Accessories Sensor mountin Sinal processin Roller head, hardened steel. Mountin via external thread M2.5 at push rod. Lock with knurled screw. Type Z-R50, P/N Clamps 4 sinle clamps, anodized aluminum, with screw M4x tinned, for lower total heiht Type Z-FTI-B01, P/N Front view Side view Sinal conditioner Cost-efficient basic version with fixed output rane, voltae or current output. Not adjustable. Type MUP-080, P/N 05422x Data sheet MUP-080 Cap rail mountin, width 35 mm Sinal conditioner Voltae or current output, adjustable zero and span. Available with or without electrical isolation. Compact size. Type MUP-110-x, P/N 05401x Type MUP-160-x, P/N 05406x Data sheet MUP-110_160 Pae 9

10 Novotechnik Messwertaufnehmer OHG Postfach Ostfildern (Ruit) Horbstraße Ostfildern (Ruit) Telefon Telefax Front view Side view 05/2017 Printed in Germany Sinal conditioner Simple teach-in function to adapt start and end point. Switchable current or voltae output. Type MUP-400, P/N 05420x Data sheet MUP-400 Sinal conditioner Electronics inside robust even for outside use. Zero point and span adjustable. Type MUK-350, P/N 05417x Data sheet MUK-350 Front view Side view Panel cutout Multifunctional Display Microprocessor-controlled measurin devices for direct connection of potentiometric sensors or sensors with standardized analo output sinals. accuracy up to 0.1 % display rane ood cost/value ratio Type MAP-40 - _ - _ Data sheet MAP-4000 Panel ceilin: 0.5 mm Front view Side view Multifunctional displays Microprocessor-controlled measurin devices with alvanic isolation for direct connection of potentiometric sensors or sensors with standardized analo output sinals. accuracy up to 0.01 % display rane Type MAP-3(4) -_ - - Data sheet MAP-300/400 The specifications contained in our datasheets are intended solely for informational purposes. The documented specification values are based on ideal operational and environmental conditions and can vary sinificantly dependin on the actual customer application. Usin our products at or close to one or more of the specified performance ranes can lead to limitations reardin other performance parameters. It is therefore necessary that the end user verifies relevant performance parameters in the intended application. We reserve the riht to chane product specifications without notice. Pae 10