Connectors according to DIN /IEC
|
|
|
- Felicity Stafford
- 5 years ago
- Views:
Transcription
1 Connetors ording to DIN /IEC ept GmH I Tel. +49 (0) 88 61/ I Fx +49 (0) 88 61/55 07 I E-Mil sles@ept.de I
2 Contents Introdution 28 Overview 30 The Stndrd 32 Derting Digrms 33 THTR Signl Connetors up to 1.5 A Power Connetors up to 5.6 A Power Connetors up to 15 A Speil Types nd Aessories Shroud 123 Swithing Connetor Additionl Informtion 131 Coding 132 Pre-mting / lte-mting Contts 133 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 27
3 Introdution Connetors ording to DIN / IEC High Vriety nd well proven Key Fetures: The DIN 41612/IEC produt 2.54 mm or 5.08 mm pith. The hoies rnge from signl onnetors with urrent rting of up to 1.5 A to power onnetors tht n hndle up to 5.6 A or even 15 A. The welth of vrints pplitions. Stndrdiztion ensures tht the onnetors re omptile with produts from different mnufturers. smll thes supports pre-mting nd lte-mting ontts rnge of essories, suh s shrouds, Applitions: DIN onnetors from ept re ville in rnge of termintion tehnologies. Pre- nd lte mting nd odes provide developers nd rnge of possile pplitions. high urrent Termintions Press-fit Through-Hole THTR IDC Applition Perpendiulr Horizontl Prllel Power 28 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
4 Introdution Mle Connetor Type C press-fit zone Tom press flnge for ord-lok oding 2.54 mm pith PBT oding 2.54 mm pith internl spring ontt PBT Femle Connetor Type C flnge for ord-lok press-fit zone Tom press ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 29
5 Overview Type Pith (mm) mx. no. of ontts Signl or power Termintion Mting onnetor Pge referene B / 32 / / 32 / 20 Signl 1.5 A Signl 1.5 A solder, THTR solder, THTR strt on p Signl 1.0 A IDC strt on p. 128 C C, C/2, C/3 C, C/2, C/ / 48 / / 48 / 30 Signl 1.5 A Signl 1.5 A solder, THTR solder, THTR C, C/2, C/3 R, R/2, R/3 C, C/2, C/3 R, R/2, R/3 strt on p. 52 C IDC Signl 1.0 A IDC C, R strt on p. 128 M / 30 / Signl 1.5 A Signl 1.5 A solder solder strt on p. 64 Q / 32 Signl 1.5 A solder strt on p. 72 R R, R/2, R/3 R, R/2, R/ / 48 / / 48 / 30 Signl 1.5 A Signl 1.5 A solder, THTR solder, THTR R, R/2, R/3 C, C/2, C/3 R, R/2, R/3 C, C/2, C/3 strt on p. 74 D Power 5.6 A Power 5.6 A solder solder strt on p ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
6 Overview Type Pith (mm) mx. no. of ontts Signl or Power Termintion Mting onnetor Pge referene E Power 5.6 A Power 5.6 A solder solder strt on p. 90 F Power 5.6 A Power 5.6 A solder solder strt on p. 94 G Power 5.6 A Power 5.6 A solder solder strt on p H11, H Power 15 A Power 15 A solder solder H11 strt on p. 106 H H15, H Power 15 A Power 15 A solder solder H15 strt on p Power 15 A Power 15 A solder solder strt on p. 114 VMEx Signl 1.5 A - strt on p. 120 Swith Swithing onnetor Signl 1.5 A strt on p. 124 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 31
7 The Stndrd The Stndrd / IEC Europen IEC stndrd in 1999, DIN 41612/IEC onnetors re used to estlish onnetion etween onnetors. omined with the high level of onnetions: ords ords 15 A possile to support the speil funtions onnetion, s soldering onnetion re lso offered with mounting lips onnetors on the iruit ord in order improve strin relief of the onnetor during the mting/unmting proess. 32 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
8 Derting Digrm Derting Digrms Amient temperture C Amient temperture C Amient temperture C Type B, Q, C, R 20 C 1.5 A 70 C 1.1 A 100 C 0.7 A Type D, E, F, G 20 C 5.6 A 70 C 4.0 A 100 C 2.5 A Type H 20 C 15 A 70 C 11 A 100 C 8 A ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 33
9 THTR THTR-Connetors from ept As mnufturers move to one step norml through hole omponents don t meet the temperture demnds ept is plesed to nnoune the introdution of our high temp DIN onnetor series, THTR. The onnetors tempertures nd e soldered in the sme prodution th s other surfe elimintes the need for dditionl solder efore in n dditionl proess step the onnetor hd een pressed into with the other omponents in the ept onnetors in THTR re mde from high temperture resistnt plsti, In ordne with RoHS ompline solder proess nd re rted to ept lso offers dditionl DIN onnetors for eletroni pplitions, 34 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
10 THTR pplition of the soldering pste dispenser, or solder preform. to ll solder lotions. pin pressed into the solder pste through the hole ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 35
11 B, B/2, B/3 C, C/2, C/3 M, M/2, M/3 VME 64x Q, Q/2 R, R/2, R/3 Stndrd IEC Numer of ontts 64/32/20 96/48/30 78/30/ Contt row designtion of mle nd z d femle onnetors z d Termintion Operting temperture rnge -55 C to +125 C Mehnil Insultor mteril Engging nd seprting fore for the 64 pol. < 60 N 32 pol. < 30 N 20 pol. < 18 N 96 pol. < 90 N 48 pol. < 45 N 30 pol. < 28 N 160 N Seprting fore per ontt (test mesuring devie) > 0.15 N Performne level I Performne level II Performne level III mx. opertionl urrent C Contt resistne < 20 m < 20 m < 30 m Clerne 1.2 mm Creepge 1.2 mm Insultion resistne > 10 6 M > 10 4 M ontt/ontt ontt/ground Soldering temperture Environment 36 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
12 D E F G H Stndrd IEC Numer of ontts Contt row designtion of mle nd femle onnetors e z d z d f z d Termintion Operting temperture rnge -55 C to+125 C -65 C to +125 C Mehnil Insultor mteril Engging nd seprting fore for the Seprting fore per ontt (test mesuring devie) < 40 N < 60 N < 75 N < 100 N < 80 N < 90 N > 0.15 N > 0.2 N > 0.2 N > 0.2 N > 0.2 N mx. opertionl urrent C C Contt resistne < 15 m < 8m Clerne 3.0 mm 1.6 mm 4.5 mm 4.5 mm Creepge 3.0 mm 1.6 mm 3.0 mm 8.0 mm 8.0 mm Insultion resistne > 10 6 M ontt/ontt ontt/ground Soldering temperture up to 260 C Environment ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 37
13 Plted through-hole ording to IEC new ord surfes. D/E/F/G PCB thikness min. 1.6 mm min. 1.6 mm min. 1.6 mm B Plted hole Ø / mm Ø / mm Ø / mm C Drill hole 1.0 ± mm 1.15 ± mm 1.75 ± mm D Cu plting min. 25 μm min. 25 μm min. 25 μm E imm. Sn plting mx. 1.5 μm mx. 1.5 μm mx. 1.5 μm F Annulr ring min. 0.1 mm min. 0.1 mm min. 0.1 mm PCB thikness min. 1.6 mm min. 1.6 mm min. 1.6 mm B Plted hole Ø / mm Ø / mm Ø / mm C Drill hole 1.0 ± mm 1.15 ± mm 1.75 ± mm D Cu plting min. 25 μm min. 25 μm min. 25 μm E μm Au more thn μm Ni μm Au more thn μm Ni μm Au more thn 2.5 5μm Ni F Annulr ring min. 0.1 mm min. 0.1 mm min. 0.1 mm PCB thikness min. 1.6 mm min. 1.6 mm min. 1.6 mm B Plted hole Ø / mm Ø / mm Ø / mm C Drill hole 1.0 ± mm 1.15 ± mm 1.75 ± mm D Cu plting min. 25 μm min. 25 μm min. 25 μm E OSP* 0.15 μm 0.15 μm 0.15 μm F Annulr ring min. 0.1 mm min. 0.1 mm min. 0.1 mm PCB thikness min. 1.6 mm min. 1.6 mm min. 1.6 mm B Plted hole Ø / mm Ø / mm Ø / mm C Drill hole 1.0 ± mm 1.15 ± mm 1.75 ± mm D Cu plting min. 25 μm min. 25 μm min. 25 μm E 5 15 μm 5 15 μm 5 15 μm F Annulr ring min. 0.1 mm min. 0.1 mm min. 0.1 mm * OSP = Orgni Solderiltity Preservtives 38 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
14 Tehnil Informtion PCB thikness offers three Tom press vrints for different printed iruit B, B/2, B/3 C, C/2, C/3 102-xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx-03 Hole dimeter 0.85 mm In ddition to the 1.0 stndrd hole, for onnetors Tom press zone for the 0.85 mm hole is ville. This provides more spe etween two plted-through holes nd there n e n dditionl iruit etween the drill holes. for 0.85 mm Tom press B, B/2, B/3 C, C/2, C/3 102-xxxxx-xx 104-xxxxx-xx Tom press 1.0 mm/0.85 mm ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 39
15 Type B Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Press-fit, solder, THTR 2.54 mm Tue Dimensions in mm Hole pttern For detiled drwings visit Aessories Mting onnetor / Applition: Type B Femle onnetor (p. 42) 40 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
16 Type B Press-fit - Performne level II 3.4 mm 13 mm performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II 3.0 mm ngled 3.0 mm stright 13 mm ngled performne level I + III or ustomized speil ontt length ontt rrngement THTR - Performne level II 3.0 mm ngled ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 41
17 Type B Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder, THTR 2.54 mm Tue Dimensions in mm Hole pttern For detiled drwings visit Aessories Note / Options Mting onnetor / Applition: Type Q Mle onnetor (p. 72) 42 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
18 Type B Press-fit - Performne level II 3.2 mm 4.6 mm 13 mm 17 mm 32 > 1.5 mm mm mm > 2.8 mm > 1.5 mm performne level I + III or ustomized speil ontt length lterntive ontt surfe Sn e. g. for WireWrp ontt rrngement Solder - Performne level II 2.5 mm 3.4 mm 4.6 mm 13 mm 5.5 mm mnul soldering with solder lug THTR - Performne level II performne level I + III or ustomized speil ontt length ontt rrngement 2.5 mm 3.4 mm 4.6 mm ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 43
19 Type B/2 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Press-fit, solder, THTR 2.54 mm Try Dimensions in mm Hole pttern For detiled drwings visit Aessories Mting onnetor / Applition: 44 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
20 Type B/2 Press-fit - Performne level II 3.4 mm 13 mm performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II 3.0 mm ngled 3.0 mm stright 13 mm performne level I + III or ustomized speil ontt length ontt rrngement THTR - Performne level II 3.0 mm ngled ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 45
21 Type B/2 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder, THTR 2.54 mm Try Dimensions in mm Hole pttern For detiled drwings visit Aessories Mting onnetor / Applition: Type B/2 Mle onnetor (p. 44) 46 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
22 Type B/2 Press-fit - Performne level II mm 4.6 mm 13 mm 17 mm mm mm > 2.8 mm mm mm > 2.8 mm performne level I + III or ustomized speil ontt length lterntive ontt surfe Sn e. g. for WireWrp ontt rrngement Solder - Performne level II 2.5 mm 4 mm 13 mm 5.5 mm Mnul soldering with solder lug performne level I + III or ustomized ontt rrngement THTR - Performne level II 2.5 mm 4 mm ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 47
23 Type B/3 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Press-fit, solder 2.54 mm Try Dimensions in mm Hole pttern For detiled drwings visit Aessories Mting onnetor / Applition: 48 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
24 Type B/3 Press-fit - Performne level II 3.4 mm 13 mm performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II 3.0 mm ngled 3.0 mm stright 13 mm ngled performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 49
25 Type B/3 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder 2.54 mm Try Dimensions in mm Hole pttern For detiled drwings visit Aessories Mting onnetor / Applition: 50 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
26 Type B/3 Press-fit - Performne level II mm 4.6 mm 13 mm 17 mm mm mm > 2.8 mm performne level I + III or ustomized speil ontt length lterntive ontt surfe Sn e. g. for WireWrp ontt rrngement Solder - Perfomne level II 2.5 mm 4 mm 13 mm 5.5 mm Mnul soldering with solder lug performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 51
27 Type C Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Press-fit, solder, THTR 2.54 mm Tue Dimensions in mm Hole pttern For detiled drwings visit Aessories Mting onnetor / Applition: 52 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
28 Type C Press-fit - Performne level II 3.4 mm 13 mm performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II THTR - Performne level II 3.0 mm ngled 3.0 mm stright 13 mm ngled 3.0 mm ngled performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 53
29 Type C Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder, THTR 2.54 mm Tue L Hole pttern Dimensions in mm For detiled drwings visit Aessories Similr produts Mting onnetor / Applition: Type R Mle onnetor (p. 74) 54 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
30 Type C Press-fit - Performne level II mm 4.6 mm 13 mm 17 mm mm mm > 2.8 mm mm mm > 2.8 mm > 1.5 mm > 1.5 mm ontt rrngement performne level I + III or ustomized speil ontt length lterntive ontt surfe Sn e. g. for WireWrp Solder - Performne level II 2.5 mm 3.4 mm 4.6 mm 13 mm Solder lug ontt rrngement performne level I + III or ustomized speil ontt length THTR - Performne level II 2.5 mm 3.4 mm 4.6 mm ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 55
31 Type C/2 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Press-fit, solder, THTR 2.54 mm Try Dimensions in mm Hole pttern For detiled drwings visit Aessories Mting onnetor / Applition: 56 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
32 Type C/2 Press-fit - Performne level II 3.4 mm 13 mm performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II 3.0 mm ngled 3.0 mm stright 13 mm ngled performne level I + III or ustomized speil ontt length ontt rrngement THTR - Performne level II 3.0 mm ngled ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 57
33 Type C/2 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder, THTR 2.54 mm Try Dimensions in mm Hole pttern For detiled drwings visit Aessories Mting onnetor / Applition: 58 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
34 Type C/2 Press-fit - Performne level II mm 4.6 mm 13 mm 17 mm mm mm > 2.8 mm > 1.5 mm > 1.5 mm performne level I + III or ustomized speil ontt length lterntive ontt surfe Sn e. g. for WireWrp ontt rrngement Solder - Performne level II 2.5 mm 3.4 mm 4.6 mm 13 mm 5.5 mm Mnul soldering with solder lug THTR - Performne level II performne level I + III or ustomized speil ontt length ontt rrngement 2.5 mm 3.4 mm 4.6 mm ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 59
35 Type C/3 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Press-fit, solder 2.54 mm Try Dimensions in mm Hole pttern For detiled drwings visit Aessories Mting onnetor / Applition: 60 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
36 Type C/3 Press-fit - Performne level II 3.4 mm 13 mm performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II 3.0 mm ngled 3.0 mm stright 13 mm ngled performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 61
37 Type C/3 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder 2.54 mm Try Dimensions in mm Hole pttern For detiled drwings visit Aessories Mting onnetor / Applition: 62 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
38 Type C/3 Press-fit - Performne level II 4.6 mm 13 mm 17 mm performne level I + III or ustomized speil ontt length lterntive ontt surfe Sn e. g. for WireWrp ontt rrngement Solder - Performne level II 2.5 mm 3.4 mm 4.6 mm 13 mm 5.5 mm Mnul soldering with solder lug performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 63
39 Type M Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Solder 2.54 mm Dimensions in mm Hole pttern For detiled drwings visit Mting onnetor / Applition: 64 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
40 Type M Hole pttern Solder - Performne level II 3.0 mm / / performne level I + III or ustomized ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 65
41 Type M Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder 2.54 mm Tue Dimensions in mm drwing similr For detiled drwings visit Note t the flnge. Mting onnetor / Applition: 66 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
42 Type M Hole pttern Press-fit - Performne level II Solder - Performne level II 4.6 mm 4.6 mm 6/ / / / / / performne level I + III or ustomized speil ontt length proessing tools ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 67
43 Type M Type: Terminton: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit 2.54 mm Tue Dimensions in mm drwing similr For detiled drwings visit Aessories Note Femle onnetors must e printed iruit t the flnge. Mting onnetor / Applition: 68 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
44 Type M Hole pttern Press-fit - Performne level II Speil ontt is not pre-loded 4.6 mm Speil ontt is pre-loded 4.6 mm 6/ / / performne level I + III or ustomized speil ontt length proessing tools ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 69
45 Type M/2, M/3 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder 2.54 mm Try Dimensions in mm M/2 M/3 For detiled drwings visit Note t the flnge. Mting onnetor / Applition: 70 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
46 Type M/2, M/3 Press-fit - Performne level II 4.6 mm M/2 30/2 M/3 12/ performne level I + III or ustomized speil ontt length proessing tools Solder - Performne level II 4.6 mm M/2 30/2 M/3 12/ performne level I + III or ustomized speil ontt length proessing tools Press-fit with speil ontt - Performne level II 4.6 mm 4.6 mm Speil ontt is not pre-loded Speil ontt is pre-loded M/2 30/2 M/3 12/ performne level I + III or ustomized speil ontt length proessing tools ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 71
47 Type Q Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Mle onnetor stright Solder 2.54 mm Dimensions in mm Hole pttern For detiled drwings visit Solder - Performne level II 2.5 mm 4.0 mm performne level I + III or ustomized Mting onnetor / Applition: Type B Femle onnetor (p. 42) 72 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
48 Type Q/2 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Mle onnetor stright Solder 2.54 mm Hole pttern Dimensions in mm For detiled drwings visit Solder - Performne level II 2.5 mm 4.0 mm performne level I + III or ustomized Mting onnetor / Applition: ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 73
49 Type R Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Mle onnetor stright Press-fit, solder, THTR 2.54 mm Tue Dimensions in mm For detiled drwings visit Aessories Mting onnetor / Applition: 74 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
50 Type R Press-fit - Performne level II 4.6 mm 13 mm 17 mm performne level I + III or ustomized speil ontt length lterntive ontt surfe Sn e. g. for WireWrp ontt rrngement Solder - Performne level II THTR - Performne level II 2.5 mm 4 mm 5.5 mm Mnul soldering with solder lug 2.5 mm 4 mm performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 75
51 Type R Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Press-fit, solder, THTR 2.54 mm Tue Dimensions in mm For detiled drwings visit Mting onnetor / Applition: Aessories Type R Mle onnetor (p. 74) 76 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
52 Type R Press-fit - Performne level II 3 mm performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II 3.0 mm performne level I + III or ustomized speil ontt length ontt rrngement THTR - Performne level II 3.0 mm ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 77
53 Type R/2 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Mle onnetor stright Press-fit, solder 2.54 mm Dimensions in mm For detiled drwings visit Mting onnetor / Applition: Aessories 78 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
54 Type R/2 Press-fit - Performne level II 4.6 mm 13 mm 17 mm performne level I + III or ustomized speil ontt length lterntive ontt surfe Sn e. g. for WireWrp ontt rrngement Solder - Performne level II 2.5 mm 4 mm performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 79
55 Type R/2 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Press-fit, solder 2.54 mm Try Dimensions in mm For detiled drwings visit Mting onnetor / Applition: Aessories 80 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
56 Type R/2 Press-fit - Performne level II 3.0 mm performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II 3.0 mm performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 81
57 Type R/3 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Mle onnetor stright Press-fit, solder 2.54 mm Dimensions in mm For detiled drwings visit Mting onnetor / Applition: Aessories 82 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
58 Type R/3 Press-fit - Performne level II mm 13 mm 17 mm performne level I + III or ustomized speil ontt length lterntive ontt surfe Sn e. g. for WireWrp ontt rrngement Solder - Performne level II mm 4.0 mm performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 83
59 Type R/3 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Press-fit, solder 2.54 mm Try Dimensions in mm For detiled drwings visit Mting onnetor / Applition: Aessories 84 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
60 Type R/3 Press-fit - Performne level II 3.0 mm performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II mm performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 85
61 Type D Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Solder Tue Dimensions in mm For detiled drwings visit Aessories Mting onnetor / Applition: 86 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
62 Type D Solder - Performne level II 3.0 mm ngled 3.7 mm stright performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 87
63 Type D Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder Tue Dimensions in mm For detiled drwings visit Aessories Mting onnetor / Applition: 88 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
64 Type D Press-fit - Performne level II 4.6 mm 6.0 mm 20 mm hole dimeter 1.0 mm hole dimeter 1.6 mm hole dimeter 1.6 mm performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II 4.0 mm 20 mm 2.5 mm 4.6 mm 5.5 mm Mnul soldering with solder lug performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 89
65 Type E Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Solder Tue Dimensions in mm For detiled drwings visit Aessories Mting onnetor / Applition: 90 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
66 Type E Solder - Performne level II 2.9 mm Pith 5.08 mm 2.9 mm Pith 2.54 mm 3.7 mm e e e performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 91
67 Type E Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder Tue Dimensions in mm For detiled drwings visit Aessories Mting onnetor / Applition: 92 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
68 Type E Press-fit - Performne level II 4.6 mm 20 mm 32 e e e performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II 4.0 mm 20 mm 2.5 mm 4.6 mm 5.5 mm Mnul soldering with solder lug 32 e e e performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 93
69 Type F Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Solder Bohrungen für Codierstifte hole enter for polriztion pin Dimensions in mm For detiled drwings visit Mting onnetor / Applition: Aessories 94 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
70 Type F Mle Connetor Solder - Performne level II Termintion length L L L No. of ontts Contt rrngement 3 mm 3 rows elow 3 mm 3 rows sidewys Artikelnummer 3 mm 2 rows elow 32 d z d z d z performne level I + III or ustomized speil ontt length lso in THTR Bord-Lok p. 131 ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 95
71 Type F Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder Dimensions in mm For detiled drwings visit Aessories Mting onnetor / Applition: 96 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
72 Type F Press-fit - Performne level II 32 d z 6.0 mm 22 mm z 32 d z d performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II 4.5 mm Ø 1 mm 22 mm 4.5 mm Ø 0.7 mm 5.5 / 10.9 mm Mnul soldering with solder lug 32 d z z d z d performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 97
73 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder Dimensions in mm For detiled drwings visit Aessories Mting onnetor / Applition: 98 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
74 Press-fit - Performne level II 32 d z 4.6 mm 12.2 mm z d z d performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II 32 d z 4.6 mm z 32 d z d performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 99
75 Type G Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Solder Dimensions in mm For detiled drwings visit Mting onnetor / Applition: Aessories 100 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
76 Type G Solder - Performne level II 3.0 mm f z d 64 Z performne level I + III or ustomized ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 101
77 Type G Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder Dimensions in mm For detiled drwings visit Aessories Mting onnetor / Applition: 102 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
78 Type G Press-fit - Performne level II 6.0 mm 22 mm z 64 d f 2 performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II 4.5 mm Ø 1 mm 22 mm 4.5 mm Ø 0.7 mm 5.5 / 10.9 mm Mnul soldering with solder lug z d f performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 103
79 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder Dimensions in mm For detiled drwings visit Aessories Mting onnetor / Applition: 104 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
80 Press-fit - Performne level II 4.6 mm 12.2 mm z d f performne level I + III or ustomized speil ontt length ontt rrngement Solder - Performne level II 4.6 mm z d f performne level I + III or ustomized speil ontt length ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 105
81 Type H11 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Solder Dimensions in mm For detiled drwings visit Note Mting onnetor / Applition: 106 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
82 Type H11 Solder - Performne level II 3.5 mm ; ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 107
83 Type H11 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Fston Dimensions in mm For detiled drwings visit Fston - Performne level II 5.5 mm Aessories Mting onnetor / Applition: 108 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
84 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Solder Dimensions in mm For detiled drwings visit Solder - Performne level II 5.0 mm Aessories Mting onnetor / Applition: ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 109
85 Type H15 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Solder Dimensions in mm For detiled drwings visit Note Mting onnetor / Applition: 110 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
86 Type H15 Solder - Performne level II 2.8 mm Z ontt rrngement ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 111
87 Type H15 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Fston Dimensions in mm For detiled drwings visit Fston - Performne level II 0.8 mm x 6.3 mm Aessories Mting onnetor / Applition: 112 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
88 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Solder Dimensions in mm For detiled drwings visit Solder - Performne level II 4.0 mm 13 mm Aessories Mting onnetor / Applition: ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 113
89 Type H7/F24 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Solder Dimensions in mm For detiled drwings visit Note Mting onnetor / Applition: 114 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
90 Type H7/F24 Solder - Performne level II 3.0 mm d 7+24 Z 32 z ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 115
91 Type H7/F24 Type: Femle onnetor stright Termintion: Solder Numer of ontts: 24 Pith: Opertionl urrent: Pkging: Stndrd: Dimensions in mm For detiled drwings visit Mting onnetor / Applition: 116 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
92 Type H7/F24 Solder - Performne level II 4.5 mm ø 1.0 mm 22 mm 4.5 mm ø 0.7 mm 16 d z z 16 d z d performne level I + III or ustomized speil ontt length ontt rrngement Suitle rimp ontts /SN /SN ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 117
93 Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit, solder Dimensions in mm For detiled drwings visit Mting onnetor / Applition: 118 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
94 Press-fit - Performne level II 4.6 mm 7+16 z d z 7+16 d z d performne level I + III or ustomized speil ontt length proessing tools ontt rrngement Solder - Performne level II 4.6 mm 7+16 z d z 7+16 d z d performne level I + III or ustomized speil ontt length ontt rrngement Suitle rimp ontts /SN /SN ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 119
95 DIN Type VME 64x Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit 2.54 mm Tue... Dimensions in mm..... For detiled drwings visit Aessories Couldn t you find something suitle or hving questions? 120 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
96 Type VME 64x Press fit - Performne level I 4.6 mm 17 mm 160 z d z d z d performne level II + III or ustomized speil ontt length ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 121
97 Aessories Type: Pith: Pkging: Stndrd: 2.54 mm Bulk 95 A-A 15,60 13,85 X 4 x 2,54 = 10,16 9,45 Dimensions in mm 2,54 2,40 0,95 2,54 A A 2,85 0,30 31 x 2,54 = 78,74 85,30 90 For detiled drwings visit X VME mm 6.0 mm 17 mm mm 4.8 mm 17 mm different designs nd Applition: 122 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
98 Aessories Shroud Type: Pith: Pkging: Stndrd: 2.54 mm Bulk Dimensions in mm For detiled drwings visit C/R mm mm mm mm different designs nd Applition: Type R (p. 74) ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 123
99 Additionl Informtion Swithing Connetor integrted Swithes Prolem A priniple often used for different us lines vi module ords, the so-lled however, leds to new prolem, whih eomes ovious when one of re loted lose to eh or the whole endevour of pling the jumper on the orret pins results in nd therefore mispositionings n hppen. Module plugged-in Module plugged-in Module not plugged-in Disy-Chin Signl line Jumper plugged-in 124 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
100 Additionl Informtion Swithing Connetor integrted Swithes A possile solution The integrtion of swithes into stndrd onnetor ording to IEC , e. g. into femle onnetor for the prolem desried. The ontt springs of this C femle onnetor were etween the ontt springs. In rest position, with the mle onnetor not plugged-in, the djent ontt springs re short-iruited through pling of the mle onnetor plugged-in, the ontt springs re seprted from eh other through the ontt pins of the mle onnetor. The ontt ts of the spring interrupts the onnetion etween the two springs. Due to the swithing ehvior of the C femle onnetor, the losed when the module ord is pulled ontt etween two ontt springs eing plugged in when the mle onnetor is pulled out. Applition in the VME us swithing funtion t the positions of the respetive signl lines in the onnetor, the jumpers used so fr re no longer Further pplitions The integrted swithing funtion is not restrited to the positions in the C femle onnetor stted ove. A swith in the, nd rows of C femle onnetor IEC nd/or etween the nd rows of C femle onnetor IEC A further pplition for ept swithing onnetors re e. is Funtionl priniple of the swithing onnetors View from the side Swithing ontts in rows 2 4 View from the top Swithing priniple 1 3 Swithing ontts ross rows ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 125
101 Swithing Connetor Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright Press-fit 2.54 mm Tue Dimensions in mm For detiled drwings visit Aessories Mting onnetor / Applition: Type R Mle onnetor (p. 74) 126 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
102 Swithing Connetor Press-fit - Performne level II mm 4.6 mm 13 mm 17 mm mm mm > 2.8 mm mm mm > 2.8 mm performne level I + III or ustomized speil ontt length ontt rrngement ridge positions ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 127
103 IDC Type B Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright 2.54 mm Dimensions in mm For detiled drwings visit IDC - Performne level II strin relief rket rion le lso ville in solder/ Mting onnetor / Applition: Note Type Q Mle onnetor (p. 72) 128 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
104 IDC Type C Type: Termintion: Numer of ontts: Pith: Opertionl urrent: Pkging: Stndrd: Femle onnetor stright 2.54 mm Dimensions in mm For detiled drwings visit IDC - Performne level II strin relief rket rion le lso ville in solder/ Mting onnetor / Applition: Note Type R Mle onnetor (p. 74) ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 129
105 Additionl Informtion IDC IDC Insultion displement onnetion iruit ords. In this onnetion insultion displement ontts with their insultion intt nd then pressed into the ontts. The insultion is displement ontts nd the wire is onneted to the ontts. relile ontt losure. Connetions IDC Insultor mteril Temperture rnge 55 C to C pprox pf Opertionl urrent 1 A t 20 C Opertionl voltge Test voltge Contt resistne Insultion resistne Environment 30 mω 10 6 MΩ 130 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
106 Additionl Informtion As n lterntive to the rivet nd/ or srew fstening of the mle nd/ onnetors n lso e mounted nd tension. The onnetions re strong enough to hold the onnetor onto the plted mounting holes, soldering the the strin relief of the onnetor during insertion nd/or withdrwl. Ø F h h < 20 N > 10 N > 25 N < 20 N > 5 N > 25 N xxx-xxxxxc1 xxx-xxxxxc2 xxx-xxxxxc3 1.6 mm 2.4 mm 3.6 mm F m : mx. mounting fore per Bord-Lok F h : min. retention fore per Bord-Lok Ordering exmple: C-FL/LP 1.6 mm, prt numer C1 Ø F h h < 30 N > 10 N > 20 N < 30 N > 7.5 N > 20 N xxx-xxxxxc1 xxx-xxxxxc2 xxx-xxxxxc3 1.6 mm 2.4 mm 3.6 mm F m : mx. mounting fore per Bord-Lok F h : min. retention fore per Bord-Lok Ordering exmple: C-ML/LP 1.6 mm, prt numer C1 ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 131
107 Additionl Informtion Coding Coding without loosing Contts Type B nd C The integrted oding of the onnetors oding, oding wedges re inserted into the femle onnetor nd mthing mteril of the mle onnetor with oding pliers. 1) Mle onnetor 2) Femle onnetor 1) Brek-out oding 2) Insert oding wedge into the femle onnetor Strs Type D, E, F nd G holes n e drilled into the mle onnetor nd pins n e inserted into the femle onnetor in mthing positions. Drill oding hole with guge. Insert oding pin into the oding hole using the insertion tool. Bore guge Insertion tool Coding pin items Type H11 nd H ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I
108 Pre-mting nd lte-mting Contts x y x y x y x y x y x y x y DIN Additionl Informtion Pre-mting nd lte-mting Contts - For DIN type B, C, R, D, E, F, G The pre-mting ontt n - s speil ontt rrngement - e inserted into B C R D E F G B, B/2, B/3, C, C/2, C/ Mting side R, R/2,R/3 Termintion side D E E F, G other lengths possile for pre-mting nd lte-mting ept GmH I Tel. +49 (0) / I Fx +49 (0) / I E-Mil sles@ept.de I 133
Linear measuring technology
Mesuring length mx 125 m Trverse speed mx 10 m/s The drw wire mehnis 50 ost oth ompt design nd high dynmis The drw wire mehnis my e equipped with enoders with n nlog, inrementl or solute put The mximum
Accessories. Guard grille, streamers 238. Wall rings 248. Connection leads 250. Accessories for ESM and Q-motor 250
Generl informtion Gurd grille, stremers 238 Wll rings 248 Connetion leds 250 Aessories for nd 250 Terminl ox, motor protetion swith, speed setting, str-delt swith, repir swith, pitors 256 237 Contts Tehnology
HF Bloc-...-VPS HF Bloc-...-DSLC-SG HF Bloc-...-DSLC-HP
HF Blo Doule vlve omintion Nominl dimeter DN 50 - DN 300 HF Blo-...-VPS HF Blo-...-DSLC-SG HF Blo-...-DSLC-HP 7.70 Printed in Germny Edition 02.10 Nr. 255 933 1 6 Tehnology DUNGS doule vlve omintion HF
3/8" Square Multi-Turn Cermet Trimmer
www.vishy.om 3/8" Squre Multi-Turn Cermet Trimmer Vishy Sfernie FEATURES Industril grde W t 70 C Tests ording to CECC 41000 or IEC 60393-1 The is smll size trimmer - 3/8" x 3/8" x 3/16" - nswering PC ord
Basic module type PVBZ. PVP with integrated HPCO. Tech Note
Bsi module type PVBZ PVP with integrted HPCO Teh Note Bsi module type PVBZ Teh Note Contents ontents Introdution... 3 Setionl drwing... 4 Funtion... 5 Tehnil dt... 6 PVP Pump side module with T0... 7 PVBZ
Power Terminals. 316 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I I
E L E C T R O N I C C O N N E C T O R S Power Terminals 316 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Contents Introduction 318 Overview 319
Operation Manual. Meter Relay Model NRE-65A
Opertion Mnul Meter Rely Model NRE-65A I-2331-1/2 We thnk you for your purhse of our model NRE-65A series meter rely. For sfety use of this produt, plese oserve the following ution. For proper opertion
Model 3500 Transmitter (9-wire) or Model 3300 Peripheral
Quik Referene Guide P/N 3300995, Rev. C April 2003 Model 3500 Trnsmitter (9-wire) or Model 3300 Peripherl Instlltion Instrutions for Rk-Mount For online tehnil support, use the EXPERT 2 system t www.expert2.om.
3/8" Square Multi-Turn Cermet Trimmer
www.vishy.om 3/8" Squre Multi-Turn Cermet Trimmer Vishy Sfernie FEATURES Industril grde W t 70 C Tests ording to CECC 41000 or IEC 60393-1 The is smll size trimmer - 3/8" x 3/8" x 3/16" - nswering PC ord
Accessories. Guard grilles, streamers 362. Wall rings 372. Connection lines 374. Accessories for Q-motors and energy-saving motors (ESM) 374
Aessories Generl informtion Gurd grilles, stremers 362 Wll rings 372 fns Connetion lines 374 Aessories for Q-motors nd energy-sving motors (ESM) 374 Terminl boxes, pitors, speed setting devies, motor protetion
Basic Module Type PVBZ. PVP with Integrated HPCO. Tech Note
Bsi Module Type PVBZ PVP with Integrted HPCO Teh Note Bsi Module Type PVBZ Teh Note Contents Revision History Tle of Revisions Dte Pge Chnged Rev Jn 2010 16 Jpn lotion hnged BC Jn 2010 4, 13 Drwings CA
AWWA Grooved Fittings
WW Grooved Produts WW Grooved Fittings MTERI SPECIFICTIONS Mteril - Dutile Iron per STM 53 Grde 5-45-12. Interior lining - Cement lined per NSI/WW C104/21.4 sizes 3 single thikness nd sizes 4-3 doule thikness
5000 series strike. Installation Instructions. ASSA ABLOY, the global leader in door opening solutions HES 2005
22630 North 17th Avenue Phoenix, Arizon 85027 Tehnil Support: 800.626.7590 support@hesinnovtions.om www.hesinnovtions.om 5000 series strike Instlltion Instrutions ASSA ABLOY, the glol leder in door opening
HFKN. The SMW-AUTOBLOK. Technology at the highest level:
Tehnology t the highest level: The SMWAUTOBOK FK Esy lurition even on vertil mhines with 3 rdil uiltin grese nipples. rge through hole for full use of spindle ore. igh effiieny of the wedge r drive ensures
NV/NH horizontal fuse-switch disconnectors KVL for busbar mounting
60 mm usr system NV/NH horizontl fuse-swith disonnetors KVL for usr mounting Uniform over utout KVL - horizontl fuse-swith disonnetors with different sizes n e omined together nd form uniform over utout.
GUARDIAN MEDIUM PRESSURE
GUARDIAN MEDIUM PRESSURE P1100 & P00 GUARDIAN INDUSTRIAL & ATEX Exi CERTIFIED PRESSURE SWITCH The stndrd rnge represents the bsi models to over pressure pplitions for settings of between 0. nd 19 br (3
LifeTec PT N PROCESS FILTRATION FROM PURE TO STERILE MAIN FEATURES & BENEFITS PRODUCT DESCRIPTION INDUSTRIES
FROM PURE TO STERILE MAIN FEATURES & BENEFITS Exellent mteril resistne towrds ggressive medi Inherently hydrophoi PTFE memrne Sterile grde t 0.2 µm (HIMA/ASTM) High flow rtes Biologilly inert Approved
MANN+HUMMEL In-line oil filters
MANN+HUMMEL In-line oil filters 5 MANN+HUMMEL In-line oil filters MANN+HUMMEL in-line filters re used minly in ydruli systems, for te filtrtion of engine nd gerbox oil, nd in lube-oil iruits in generl
AWWA Grooved Fittings
WW Grooved Sumittl Form WW Grooved Fittings SUMITT INFORMTION PROECT NME: ENGINEER: CONTRCTOR: WW Grooved Fitting SPEC. SECTION: MEMER FETURES & DVNTGES Fittings supplied with rigid rdius grooves in ordne
JS Series Sub-Miniature Slide Switches
Su-Miniture Switches Fetures/enefits Positive detent Low profile IR reflow to 60º solder profile Surfce nd thru hole mounting, DPDT, DPT models RoHS complint Typicl pplictions Telecommuniction products
Wirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Tubular
Wirewound Resistors, Industrial Power, Vitreous oated, djustable Tubular FETURES High temperature vitreous coating omplete welded construction Tight tolerance of 5 % for values above 1 Excellent stability
Electrical measurement and control. Measurement Transformers and Shunts
Eletril mesurement nd ontrol Mesurement Trnsformers nd Shunts M.7 - Mesurement Trnsformers nd Shunts serie MC Mesurement Trnsformers nd Shunts Single-phse Effiient urrent trnsformers... M7-7 serie MC-3
LifeTec PP N PROCESS FILTRATION FROM PURE TO STERILE MAIN FEATURES & BENEFITS PRODUCT DESCRIPTION INDUSTRIES
FROM PURE TO STERILE MAIN FEATURES & BENEFITS Extremely durle Polypropylene onstrution Outstnding flow rte Extremely high dirt holding pity Asymmetril filter mtrix for longer servie life Approved for Food
Accessories. Inlet rings 306. Guard grilles 309. Lead connections, capacitors 313. Terminal boxes, air filters 316
Inlet rings 306 Generl informtion Gurd grilles 309 Led onnetions, pitors 33 Terminl boxes, ir filters 36 Motor protetion swith, speed setting, str-delt swith, repir swith 37 Contts Tehnology Aessories
MixMate series the high-capacity connectors
MixMte series the high-cpcity connectors RockStr inserts MixMte series the high-cpcity connectors MixMte integrtes xil screw contcts nd TOP connection technology in one plug-in connector. The compct design
POWER TRIM. Table of Contents. Section 5B - Trim Cylinders
SERVICE MANUAL NUMBER 14 Tle of Contents POWER TRIM Setion 5B - Trim Cylinders TRIM CYLINDERS Speifitions....................... 5B-2 Torque Speifitions............. 5B-2 Speil Tools.....................
M40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
Classic 9. Sliding Door Systems, C-Profile
Clssi 9 Sliding oor Systems, C-Profile Tle of Contents Clssi 9 - Tue rive Systems, C-Profile Trks, Joint Brkets Hngers Srew-on Pltes Fixing Brkets Side Fixing Brkets Trk Stoppers U-Trks nd Guide Rollers
MODULAR TELEPHONE JACKS
dam Technologies, Inc. MODULR TELEPHONE JKS INTRODUTION: dam Tech MTJ series Modular Telephone Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules
Clearline. fusion. Installation. t<45mm Universal Roofing Kit F16 T F16 L. viridian. solar. v
Clerline Instlltion t
Snap & Grow 6 x8 254 L x 190 W x 209 H cm 100 L x 74 3 /4 W x 82 1 /4 H
Assemly Instrutions Snp & Grow 6 x8 254 L x 190 W x 209 H m 100 L x 74 3 /4 W x 82 1 /4 H Bse Size: 245x186m / 96 1 /4 x73 1 /4 In se of ddition SNAP & GROW 6x4 Extension Kit purhse Plese refer to the
4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
ALUMINUM ENTRANCE DOORS
DOORS REVISION SHEET DESRIPTION 1 - GENERL NOTES & GLZING DETIL 2 - ELEVTIONS, NHOR LYOUT & ONFIGURTIONS 3 ELEVTIONS, NHOR LYOUT & ONFIGURTIONS - - VERTIL DETILS - HED & SILL OPTIONS 2. DEQUY OF THE EXISTING
4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
ARGUS DIFFERENTAL PRESSURE FEATURES. D560 ARGUS ATEX Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE SWITCH DIFFERENTIAL PRESSURE
ARGUS DIFFERENTAL PRESSURE D560 ARGUS ATEX Exd, Exi & INDUSTRIAL DIFFERENTIAL PRESSURE SWITCH These swithes hve been designed to suit pplitions where differentil pressures re to be sensed. The Argus provides
Go to the page for your application: face frame page 9, panel page 11, or narrow frame aluminum door page 13.
Using this tlog Step 1: Determine your pplition Go to the pge for your pplition: fe frme pge 9, pnel pge 11, or nrrow frme luminum door pge 13. Step 2: Clulte the power ftor Determining the Power ftor
Assembly Instructions
Assemly Instrutions Snp & Grow 8'x8' 254x249x260m / 100"x98"x102 1/2" In se of ddition SNAP & GROW 8x4 Extension Kit purhse Plese refer to the ssemly instrution provided in the 4 Extension Kit Box Only
Snap & Grow 8 x8 254 L x 249 W x 260 H cm 100 L x 98 W x /2 H
Assemly Instrutions Snp & Grow 8 x8 254 L x 249 W x 260 H m 100 L x 98 W x 102 1 /2 H In se of ddition SNAP & GROW 8x4 Extension Kit purhse Plese refer to the ssemly instrution provided in the 4' Extension
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
USCAR - T4/V4 ISO VIEW (WITH CLIP SLOT)
INEX PGE TITLE PGE TITLE LOK / ONNETOR SPEIFITIONS REVISION LOK / GENERL NOTES SM IGRM / KEYING TLE PRT LOK [KP LOK (IF REQUIRE)] EXPLOE VIEW / MTERIL SPEIFITIONS 5 TUM LOTIONS / FETURE ONTROL VIEWS 6
HOOK UP LAYOUT FOR HEAT GENERATION AND FUEL TANK SYSTEM
HOOK UP LYOUT FOR HET GENERTION ND FUEL TNK SYSTEM DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-018 SHT 1 "(DN0) FILL FUEL OIL
864293A02 4.3L (262 CID) MANIFOLD CONVERSION
864293A02 4.3L (262 CID) MANIFOLD CONVERSION Models Covered Notie Prts List Additionl Prts Needed Models Covered Seril Numer Or Yer 4.3L (262 CID) Single Piee Mnifolds 0F803800 nd Aove NOTICE After ompleting
Assembly Instructions
Assemly Instrutions Snp & Grow 6'x8'+4 Extension 374x19009m / 1471/4"x743/4"x821/4" Bse Size: 365x18609m / 143 3/4"x73 1/4" 6 x16 : 494x19009m / 1941/2"x743/4"x821/4" 6 0 : 614x19009m / 2413/4"x743/4"x821/4"
CS 5700 LOBBY CASH DISPENSER REAR LOAD - 15" DISPLAY OR 19" DISPLAY TYPICAL ACCESS TO LEVELING LEGS - RANGE (2) EACH SIDE OF SAFE CEN I SAFE ONLY * *
L LL -800--600 S 00 LOBBY SH DISPENSER RER LOD - " DISPLY OR " DISPLY 40mm ( 6") EN I, EN III GS or EN IV GS SFES SFE ( 6 ") ONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVIE BRNH FOR DDITIONL DETILS ND INFORMTION.
CS 7700 FULL FUNCTION LOBBY TERMINAL REAR LOAD - 15" OR 19" DISPLAY
L0 LL -800--600 R S 00 FULL FUNTION LOBBY TERMINL RER LOD - " OR " DISPLY mm ( ") UL SFE ONSULT WITH DIEBOLD INSTLLTION/SERVIE BRNH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION
Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4
Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt
Gecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
HA series the slim connectors
HA series the slim connectors RockStr inserts HA series the slim connectors When spce is tight, the smll nd nrrow HA series comes into its own. Technicl dt Stndrds / pprovls Stndrds DIN EN 61984 Approvls
4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
Assembly Instructions
Assemly Instrutions Snp & Grow 8'x8' 254x249x260m / 100"x98"x102 1/2" In se of ddition SNAP & GROW 8x4 Extension Kit purhse Plese refer to the ssemly instrution provided in the 4 Extension Kit Box Only
JET PUMP R1 JUNE 1996 JET PUMP
JET PUMP 5 90-831996R1 JUNE 1996 JET PUMP 5-1 Tle Of Contents Pge Generl Informtion....................... 5-1 Priniples of Opertion................. 5-1 Speil Tools.......................... 5-2 Serviing
HDD series the compact connectors
HDD series the compct connectors RockStr inserts HDD series the compct connectors The HDD series with turned contcts is designed for mny poles in smll spce. The compct housing design sves the user spce
FINGER STRIPS. and other EMI shielding products. Characteristics
BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used
JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
Plastic enclosure with Silicone protector
Plsti enlosure with Silione protetor TS SERIES NE TS PLASTIC CASE ITH SILICONE PROTECTOR FEATURE 1 Universl plsti se with protetive silione re springy, ntislip, nd protet of your devie from dropping impt.
Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")
Delivery ddress: Mckenrodtstrße 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Phone: +9 66 6003-0 Fx: +9 66 6003-607 E-mil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex CM0 DY, UK Phone: + 79 635533
Snap & Grow 8 x8 + 4 Extension
Assemly Instrutions Snp & Grow 8 x8 + 4 Extension 267 L x 249 W x 260 H m 150 L x 98 W x 102 1 /2 H Compny informtion: Plrm Ameris In. 9735 Commere Prkwy Kutztown, PA, USA E-Mil: greenhouseusa.support@plrm.om
CALL HEIGHT CARD READER TOP OF MONITOR FRONT SIDE CONCRETE SURFACE TO BE FLAT AND LEVEL IN AREA OF UNIT
R OPTEV 5 EXTERIOR SH DISPENSER 5 HIGH ND mm ( ") SFE L009 LL -800-999-600 HEIGHT DEPTH 65 TOP FUNTION KEY 06 (4 ") 8 ( (4 8 ") 89 (5 4 ") (4 8 ") (5 9 8 ") ( 98 8 ") (8 D E RD REDER REEIPT PRINTER DVNED
3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94
3/2 nd 4/2-wy Directionl oppet Vlves with Solenoid Opertion Model M-SED 6, Series X Size 6 000 SI (30 r) 6.6 GM (2 L/min) R 22 049/06.98 R 22 049/06.98 Replces: 02.96 Fetures: Direct operted directionl
POWER TRIM. Table of Contents. Section 5B - Trim Cylinders
Tle of Contents POWER TRIM Setion 5B - Trim Cylinders Speifitions......................... 5B-2 Torque Speifitions............... 5B-2 Lurints/Selers/Adhesives........ 5B-2 Speil Tools.........................
MINI COMBICON Double-Level Headers for Through Hole Reflow Processes, MCDN 1,5/ 3.5 mm Pitch
MINI COMBICON Double-Level Heders for Through Hole Reflow Processes, MCDN 1,5/ The MCDN(V) 1,5/ double-level heders feture minimum spce requirement on the PCB, nd t the sme time, high contct density. It
PRODUCT INFORMATION. English MCF - MBF - MBL HIGH PRESSURE. Series
PRODUCT INFORMATION English Series MCF - MBF - HIGH PRESSURE SERIES MCF - MBF - Aout us Ing. Ene Mttei SpA is n Itlin ompny tht hs een produing ir ompressors sine 1919. Over the yers, the ompny hs ontinully
JUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
New Products. Small Tool Instruments and Data Management. Abzar Tejarat : INDEX. Micrometers. Coolant Proof Micrometer
Smll Tool Instruments nd Dt Mngement Azr Tejrt : 66736774-66736726 INDEX Mirometer Quntu Mike Coolnt Proof Mirometer Digimti Mirometer Asolute Digimti Mirometers Quikmike Outside Mirometers Rthet Thimle
F-Series General Specifications
arling F-Series General Specifications F-Series breakers are available up to 700, and are also available with a 25 millivolt metering shunt construction. This optional construction provides a safe method
Surface Mount Aluminum Electrolytic Capacitors
FETURES YLINDRIL V-HIP ONSTRUTION FOR SURFE MOUNTING REDUED SIZE VILLE WITH NTI-VIRTION TERMINTIONS (8 & 10mm DIMETER) SUIT FOR HIGH TEMPERTURE REFLOW SOLDERING (UP TO 260 ) 2,000 HOUR LOD LIFE @ +105
Mechanical Fail-Safe Damper Actuator NFA
2-FON echnicl Fil-Sfe Dmper Actutor NFA ctutor emergency function for djusting ir dmpers in ventiltion nd ir conditioning systems in uildings orque Nm Nominl voltge AC 24..4V / DC 24..V Control: Open-close
Proportional pressure reducing valve type 3WZCDE6 is a
LICION roportionl pressure reducing vlve type 3WZCDE6 3-wy electriclly controlled, proportionl pressure reducing vlve type 3WZCDE6 is used for reducing pressure in hydrulic system, in continuous wy, s
Summary 0163EN. Chapter 5 - Couplings A70 Double Jacket Brass Coupling A70 Single Jacket Brass Coupling 37 A71 Forestry Coupling 37
pril 2008 0163EN Summry Fire protetion produts hpter 1 - Hose, Sprinkler Vlves nd essories 53 Gte Vlve 300 l. Rted 4 53G Single Hydrnt Gte Vlve 4 50 ngle Hose Vlve with Hydroltor 5 51 ngle Hose Vlve with
ELECTRICAL SYSTEM 4 D INSTRUMENTATION
ELECTRICAL SYSTEM 4 D 72747 INSTRUMENTATION Tle of Contents Pge Identifition............................. 4D-1 Speil Informtion....................... 4D-1 Lighting Options.................... 4D-1 Commodore
HSB series the heavy-duty connectors
HS series the hevy-duty connectors HS series the hevy-duty connectors The HS series provides users with 3 A vi ech contct with screw connections for sfe nd relile connection. Technicl dt Stndrds / pprovls
POWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch
POWER COMBICON Plugs nd Heders PC 6/ for Currents up to 41 A, The PC 6 plug connector fetures highly conductive metl lloys to offer current crrying cpcity of 41 A t rted voltge of 1000 V. A double steel
Electrically controlled directional control poppet valve type UREZ6
LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion
EXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 6X NEC STANDARD
EXLOSION ROOF DIRECIONL CONROL VLVE YE ED SERIE X NEC SNDRD CRCERISICS Hydrulic : Cetop. Mximum pressure in service : r. Nominl Flow mx. : 0 l/mn.(see tle) Directionl control vlves re solenoid operted
Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)
Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if
(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
SINEAX C 402 Alarm unit
for DC currents or DC voltges 00 II () G Appliction The lrm unit SINEAX C40 (Figure ) is normlly pplied to monitor the limits of oth current nd voltge mesurements. The sttus of the device is signlled remotely
ACCESSORIES. Table of Contents. Section 8A - All Models
SERVICE MANUAL NUMBER 11 Tle of Contents ACCESSORIES Setion 8A - All Moels ACCESSORIES - ALL MODELS Speifitions....................... 8A-2 Torque Speifitions............. 8A-2 Lurints/Selers/Ahesives......
Brazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts
MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions
TWF SERIES. PLASTIC ENCLOSURE with WALL MOUNTING FLANGE. Accessories (Optional parts)
TWF SERIES PLASTIC ENCLOSURE with WALL MOUNTING FLANGE 1 Tehnil Dt Protetion lss: IP0 Operting temperture: -10 C ~ + C Multi-purpose flnged enlosure designed for use s wll-mounted devie/terminl. different
PERSEUS DIFFERENTIAL PRESSURE DF61 & DF62 ATEX & IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE SWITCH
PERSEUS DIFFERENTIAL PRESSURE DF61 & DF62 ATEX & IECEx Exd, Exi & INDUSTRIAL DIFFERENTIAL PRESSURE SWITCH The ltest innovtion to our rnge of swithes fetures robust high qulity housing with 1 or 2 seled
V-JETm2 / JET-R User s Manual
V-JETm2 / JET-R User s Mnul 1 Pkge Contents Trnsmitter Reeiver Speifitions Prout Usge Connetor Type Operting Frequeny Rnge Wireless Distne Wireless Vieo Streming HDMI / USB-C 57GHz ~ 64GHz Mx. 10 meters
2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
Press control block PSB Type approved according to DIN EN 693
Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording
SureForce Bar Clamps. More powerful clamping force with less effort
The Pros Know SureFore Br Clmps More powerful lmping fore with less effort EXCEPTIONAL RELIABLE TOUGH The essene of n Amerin legy Totlly seled threds withstnd high impt work environments inluding dust,
Electrical System. Table of Contents. Section 4A - Starting System. Starting System
Eletril System Strting System Tle of Contents Setion 4A - Strting System Preutions...4A-2 MerCruiser Color Wiring Digrms...4A-4 Strter Identifition...4A-2 Strter Speifitions...4A-2 Torque Speifitions...4A-3
3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation
3/3, 4/2 nd 4/3 directionl poppet vlve with solenoid ctution RE 22035/06.10 Replces: 12.08 1/16 Type SEC Size 6 Component series 1X Mximum operting pressure 420 r [6100 psi] Mximum flow 25 l/min [6.6 US
PIPE SUPPORTS IRANIAN PETROLEUM STANDARDS COVER SHEET B A REV. DRAWING No. DATE DATE IPS-D-AR-012 DESCRIPTION
SUPPORTS DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-0 SHT ONRETE JOISTS STEEL JOISTS WOOD JOISTS NOTE: STRUTURL STEEL EM SEE
MNPV6 REV A DISCO 4X FINAL ASSY
NOTES 1) ITEM 2,USR, MUST HVE TWO END SCREWS REMOVED, SO THT ITEM, WHITE INSULTORS, CN E INSTLLED. 2) UNIT SHIPS WITH THE FOLLWING ECH LCK TWO WIRE STRIN RELIEFS, P/N 9--1 ECH LCK STRIN RELIEF NUTS, P/N
POWER STEERING PUMP 10 A
POWER STEERING 72951 PUMP 10 A Tle of Contents Pge Pump Speifitions.................... 10A- 1 Torque Speifitions................ 10A- 1 Tools/Selnts...................... 10A- 1 Power Steering Pump nd
Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
Electrical System. Table of Contents. Section 4C - Ignition System. Ignition System
Eletril System Ignition System Tle of Contents Setion 4C - Ignition System Exploded View Distriutor nd Relted Components...4C-4 Preutions...4C-2 Timing Speifitions...4C-6 3.0 TKS...4C-6 3.0 MPI ECT...4C-6
Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
P3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class. Special features. Dimensions (in mm) B en 1
P3IC / P3ICP Absolute pressure trnsducer Industril Clss Dtenbltt Specil fetures - For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions - Nominl (rted) pressure 10 br to 3000 br -