HA series the slim connectors
|
|
- Clara Lyons
- 5 years ago
- Views:
Transcription
1 HA series the slim connectors RockStr inserts HA series the slim connectors When spce is tight, the smll nd nrrow HA series comes into its own. Technicl dt Stndrds / pprovls Stndrds DIN EN Approvls Inserts DIN EN UL/CSA** No. of poles 3, 4, 1,, 32, 48 Rted voltge Rted voltge to UL/CSA Rted current Rted impulse withstnd voltge 25 V (4 V - HA3, HA4) 6 V A 4 kv Pollution severity 3 (32 V / 4 kv / 2) (HA1,, 32, 48) Insultion resistnce Mteril 1 1 Ω Glss-fire reinforced PC (in UL list nd pproved for rilwy pplictions) Temperture rnge 4 C C Flmmility to UL 94 V Mechnicl service life Plugging cycles Ag - Surfce 5 Plugging cycles Au - Surfce 5 Contct resistnce Crimp connection Screw connection, Tension clmp connection Contcts / Mteril Sockets nd plug-in contct Surfce Clmping unit / Screw connection 2 mω 2 mω Copper lloy Pssivted silver, or gold-plted Copper lloy / Pssivted silver Clmping rnge / Stripping length Crimp connection* mm² (AWG ) 7.5 mm Screw connection mm 2 (AWG 2 14) / 9 mm*** Tension clmp connection mm 2 (AWG 24 14) / 8 mm Clmping torque Screw connection Nm SD ldes Screw connection.6 x 3.5 or PZ Tension clmp connection.5 x 3 or.6 x 3.5 PE connection Note: Clmping rnge mm 2 solid / strnded mm 2 / mm 2 flexile / flexile with wire end ferrule, DIN pt mm 2 / mm 2 AWG conductor AWG Stripping length 1 mm Clmping torque Nm lde dimensions SD.8 x 4 mm or PZ 1 When used properly nd s designted, the listed connectors my not e connected or disconnected if there is live voltge or lod! * Crimping with flexile conductors. ** For screw nd crimp connections. *** Stripping length of 15 mm for the 3- nd 4-pole HA Derting curves Lod current [A] Lod current [A] Lod current [A] Lod current [A] HDC HA 3 / H7V-K2,5 Conductor rted current to IEC pole, 1.5 mm 2 Amient temperture [ C] HDC HA 4 / H7V-K2,5 Conductor rted current to IEC pole, 2.5 mm 2 Amient temperture [ C] mx. No. of poles ( pole) Conductor current to EN min. No. of poles (1 pole) pole, 1.5 mm 2 Amient temperture [ C] Conductor current to EN mx. No. of poles ( pole) min. No. of poles (1 pole) pole, 2.5 mm 2 Amient temperture [ C].4
2 HA series the slim connectors RockStr inserts Overview Size Rted voltge Rted current No. of poles Tension clmp connection Screw conn. with wire gurd spring Crimp PUSH IN connection connection TOP connection Pge 1 4 V A 3 + h V A 4 + h V A 1 + h V A + h V A 32 + h V A 48 + h..5
3 RockStr inserts 4 V, A, Size h Inserts Screw connection Mle HDC HA 3 MS Femle HDC HA 3 FS Dimensions Mle.5 Femle Arrngements of contcts Mle Femle.6
4 Housing selection RockStr IP66 Size 1 Hood Plug housing, cle entry sidewys Mteril: diecst luminium Further housings re ville, see Chpter E for IP66 nd Chpter F for IP68 Version Cover (mm) Type Order No. M 2 w. threding 49.2 HDC 4A TWLU 1M2G Plug housing, cle entry t top Mteril: diecst luminium 37.3 Version Cover (mm) Type Order No. M 2 w. threding 5 HDC 4A TOLU 1M2G se ulkhed housing Mteril: diecst luminium Version Cover (mm) Type Order No. 23 HDC 4A ALU se housing Mteril: diecst luminium Version Cover (mm) Type Order No. M 2 w. threding 41.5 HDC 4A SLU 1M2G Coupling housing Mteril: diecst luminium Version Cover (mm) Type Order No. M 2 w. threding 53.5 HDC 4A KOLU 1M2G Screw mounting housing Mteril: diecst luminium Version Cover (mm) Type Order No. M 2 w. threding 54 HDC 4A ELU 1M2G 1932 M2x1.5 Ø 23.3 Cover Mteril: diecst luminium Version Type Order No. for femle insert HDC 4A DMDL 2O 6575 for mle insert HDC 4A DODL 2O RockStr inserts.7
5 RockStr inserts 4 V, A, Size h Inserts Screw connection Mle HDC HA 4 MS 1498 Femle HDC HA 4 FS Dimensions Mle.4 Femle Arrngement of contcts Mle Femle.8
6 Housing selection RockStr IP66 Size 1 Hood Plug housing, cle entry sidewys Mteril: diecst luminium Further housings re ville, see Chpter E for IP66 nd Chpter F for IP68 Version Cover (mm) Type Order No. M 2 w. threding 49.2 HDC 4A TWLU 1M2G Plug housing, cle entry t top Mteril: diecst luminium 37.3 Version Cover (mm) Type Order No. M 2 w. threding 5 HDC 4A TOLU 1M2G se ulkhed housing Mteril: diecst luminium Version Cover (mm) Type Order No. 23 HDC 4A ALU se housing Mteril: diecst luminium Version Cover (mm) Type Order No. M 2 w. threding 41.5 HDC 4A SLU 1M2G Coupling housing Mteril: diecst luminium Version Cover (mm) Type Order No. M 2 w. threding 53.5 HDC 4A KOLU 1M2G Screw mounting housing Mteril: diecst luminium Version Cover (mm) Type Order No. M 2 w. threding 54 HDC 4A ELU 1M2G 1932 M2x1.5 Ø 23.3 Cover Mteril: diecst luminium Version Type Order No. for femle insert HDC 4A DMDL 2O 6575 for mle insert HDC 4A DODL 2O RockStr inserts.9
7 RockStr inserts 25 V, A, Size h Inserts Tension clmp connection Mle HDC HA 1 MT Dimensions Femle HDC HA 1 FT Mle Screw connection Femle Mle HDC HA 1 MS 561 Femle HDC HA 1 FS 562 Arrngement of contcts Mle Crimp connection Mle HDC HA 1 MC 1887 Femle HDC HA 1 FC 1886 Femle Mounting cut-out M3 ø R8 24 Accessories Crimp contcts Surfce finish gold Surfce finish silver Tools Mle Qty. Type Order No. 1 HDC-C-HE-SM.5AU HDC-C-HE-SM.75-1.AU HDC-C-HE-SM1.5AU HDC-C-HE-SM2.5AU HDC-C-HE-SM4.AU HDC-C-HE-SM.5AG HDC-C-HE-SM.75-1.AG HDC-C-HE-SM1.5AG HDC-C-HE-SM2.5AG HDC-C-HE-SM4.AG 129 Femle Type Order No. HDC-C-HE-M.5AU 5147 HDC-C-HE-M.75-1.AU 5148 HDC-C-HE-M1.5AU 5149 HDC-C-HE-M2.5AU 515 HDC-C-HE-M4.AU 5151 HDC-C-HE-M.5AG 1211 HDC-C-HE-M.75-1.AG 1212 HDC-C-HE-M1.5AG 121 HDC-C-HE-M2.5AG 1214 HDC-C-HE-M4.AG 1215 Crimping tool CTX CM 1.6/ Contct Removl Tool Removl Tool HE Conductor cross-section Insultion stripping length.5 mm 2 AWG mm mm 2 AWG mm 1.5 mm 2 AWG 7.5 mm 2.5 mm 2 AWG mm 4. mm 2 AWG mm.1
8 Housing selection RockStr IP66 Size 2 Hood Plug housing, cle entry sidewys Further housings re ville, see Chpter E for IP66 Version Cover (mm) Type Order No. M 2 w. threding 68 HDC 15A TSLU 1M2G M 25 w. threding 68 HDC 15A TSLU 1M25G RockStr inserts Plug housing, cle entry t top Version Cover (mm) Type Order No. M 2 w. threding 54 HDC 1A TOLU 1M2G M 25 w. threding 54 HDC 1A TOLU 1M25G Cover Version Type Order No. For hoods HDC 1A DODL 1L se ulkhed housing Version Cover (mm) Type Order No. 25 HDC 1A ALU 644 with cover 37.5 HDC 1A ADLU Ø se housing Version Cover (mm) Type Order No. M 2 w. threding 57 HDC 1A SLU 2M2G M 2 w. threding with cover 69.5 HDC 1A SDLU 2M2G M 25 w. threding 57 HDC 1A SLU 2M25G M 25 w. threding with cover 69.5 HDC 1A SDLU 2M25G Ø Coupling housing Version Cover (mm) Type Order No. M 25 w. threding 48 HDC 1A KLU 1M25G Cover Version Type Order No. For ses HDC 1A DMDL 2O
9 RockStr inserts 25 V, A, Size 5 + h Inserts Tension clmp connection Mle HDC HA MT Dimensions Femle HDC HA FT Mle Screw connection Femle Mle HDC HA MS 577 Femle HDC HA FS 578 Arrngement of contcts Mle Crimp connection Mle HDC HA MC 1889 Femle HDC HA FC 1888 Femle Mounting cut-out M3 ø R8 24 Accessories Crimp contcts Surfce finish gold Surfce finish silver Tools Mle Qty. Type Order No. 1 HDC-C-HE-SM.5AU HDC-C-HE-SM.75-1.AU HDC-C-HE-SM1.5AU HDC-C-HE-SM2.5AU HDC-C-HE-SM4.AU HDC-C-HE-SM.5AG HDC-C-HE-SM.75-1.AG HDC-C-HE-SM1.5AG HDC-C-HE-SM2.5AG HDC-C-HE-SM4.AG 129 Femle Type Order No. HDC-C-HE-M.5AU 5147 HDC-C-HE-M.75-1.AU 5148 HDC-C-HE-M1.5AU 5149 HDC-C-HE-M2.5AU 515 HDC-C-HE-M4.AU 5151 HDC-C-HE-M.5AG 1211 HDC-C-HE-M.75-1.AG 1212 HDC-C-HE-M1.5AG 121 HDC-C-HE-M2.5AG 1214 HDC-C-HE-M4.AG 1215 Crimping tool CTX CM 1.6/ Contct Removl Tool Removl Tool HE Conductor cross-section Insultion stripping length.5 mm 2 AWG mm mm 2 AWG mm 1.5 mm 2 AWG 7.5 mm 2.5 mm 2 AWG mm 4. mm 2 AWG mm.12
10 Housing selection RockStr IP66 Size 5 Hood Plug housing, cle entry sidewys Further housings re ville, see Chpter E for IP66 Version Cover (mm) Type Order No. M 2 w. threding 72 HDC 25A TSLU 1M2G M 25 w. threding 58 HDC A TSLU 1M25G M 25 w. threding 72 HDC 25A TSLU 1M25G RockStr inserts Plug housing, cle entry t top Version Cover (mm) Type Order No. M 2 w. threding 72 HDC 25A TOLU 1M2G M 25 w. threding 58 HDC A TOLU 1M25G M 25 w. threding 72 HDC 25A TOLU 1M25G Cover Version Type Order No. For hoods HDC A DODL 1L se ulkhed housing Version Cover (mm) Type Order No. 25 HDC A ALU 6492 with cover 4 HDC A ADLU Ø , se housing Version Cover (mm) Type Order No. M 2 w. threding 57 HDC A SLU 2M2G M 2 w. threding with cover 76.5 HDC A SDLU 2M2G M 25 w. threding 57 HDC A SLU 2M25G M 25 w. threding with cover 76.5 HDC A SDLU 2M25G Ø Coupling housing Version Cover (mm) Type Order No. M 25 w. threding 53 HDC A KLU 1M25G Cover Version Type Order No. For ses HDC A DMDL 2O
11 RockStr inserts 25 V, A, Size h Inserts Tension clmp connection Mle HDC HA MT Femle HDC HA FT Mle HDC HA MT Femle HDC HA FT Dimensions Mle Note To complete the ssemly of the plug-in connector, two inserts re required Screw connection Mle HDC HA MS 577 Femle HDC HA FS 578 Mle HDC HA MS Femle HDC HA FS Femle Arrngement of contcts Mle Note To complete the ssemly of the plug-in connector, two inserts re required Crimp connection Mle HDC HA MC 1889 Femle HDC HA FC 1888 Mle HDC HA MC Femle HDC HA FC Femle Note To complete the ssemly of the plug-in connector, two inserts re required Mounting cut-out M M3 ø R Accessories Crimp contcts Surfce finish gold Surfce finish silver Tools Mle Qty. Type Order No. 1 HDC-C-HE-SM.5AU HDC-C-HE-SM.75-1.AU HDC-C-HE-SM1.5AU HDC-C-HE-SM2.5AU HDC-C-HE-SM4.AU HDC-C-HE-SM.5AG HDC-C-HE-SM.75-1.AG HDC-C-HE-SM1.5AG HDC-C-HE-SM2.5AG HDC-C-HE-SM4.AG 129 Femle Type Order No. HDC-C-HE-M.5AU 5147 HDC-C-HE-M.75-1.AU 5148 HDC-C-HE-M1.5AU 5149 HDC-C-HE-M2.5AU 515 HDC-C-HE-M4.AU 5151 HDC-C-HE-M.5AG 1211 HDC-C-HE-M.75-1.AG 1212 HDC-C-HE-M1.5AG 121 HDC-C-HE-M2.5AG 1214 HDC-C-HE-M4.AG 1215 Crimping tool CTX CM 1.6/ Contct Removl Tool Removl Tool HE Conductor cross-section Insultion stripping length.5 mm 2 AWG mm mm 2 AWG mm 1.5 mm 2 AWG 7.5 mm 2.5 mm 2 AWG mm 4. mm 2 AWG mm.14
12 Housing selection RockStr IP66 Size 7 Hood Plug housing, cle entry sidewys Further housings re ville, see Chpter E for IP66 Version Cover (mm) Type Order No. M 25 w. threding 75 HDC 32A TSU 1M25G M 32 w. threding 75 HDC 32A TSU 1M32G RockStr inserts Plug housing, cle entry t top Version Cover (mm) Type Order No. M 32 w. threding 75 HDC 32A TOU 1M32G se ulkhed housing Version Cover (mm) Type Order No HDC 32A AU Ø se housing Version Cover (mm) Type Order No. M 25 w. threding 75 HDC 32A SU 2M25G Ø Coupling housing Version Cover (mm) Type Order No. M 25 w. threding 76.5 HDC 32A KU 1M25G M 32 w. threding 76.5 HDC 32A KU 1M32G
13 RockStr inserts 25 V, A, Size h Inserts Tension clmp connection Mle HDC HA MT Femle HDC HA FT Mle HDC HA MT Femle HDC HA FT Mle HDC HA MT Femle HDC HA FT Note To complete the ssemly of the plug-in connector, three inserts re required Dimensions Mle Screw connection Crimp connection Mle HDC HA MS 577 Femle HDC HA FS 578 Mle HDC HA MS Femle HDC HA FS Mle HDC HA MS Femle HDC HA FS Note To complete the ssemly of the plug-in connector, three inserts re required Femle Femle Arrngement of contcts Mle Mle HDC HA MC 1889 Femle HDC HA FC 1888 Mle HDC HA MC Femle HDC HA FC Mle HDC HA MC Femle HDC HA FC Note To complete the ssemly of the plug-in connector, three inserts re required Femle Mounting cut-out M M3 ø R Accessories Crimp contcts Surfce finish gold Surfce finish silver Tools Mle Qty. Type Order No. 1 HDC-C-HE-SM.5AU HDC-C-HE-SM.75-1.AU HDC-C-HE-SM1.5AU HDC-C-HE-SM2.5AU HDC-C-HE-SM4.AU HDC-C-HE-SM.5AG HDC-C-HE-SM.75-1.AG HDC-C-HE-SM1.5AG HDC-C-HE-SM2.5AG HDC-C-HE-SM4.AG 129 Femle Type Order No. HDC-C-HE-M.5AU 5147 HDC-C-HE-M.75-1.AU 5148 HDC-C-HE-M1.5AU 5149 HDC-C-HE-M2.5AU 515 HDC-C-HE-M4.AU 5151 HDC-C-HE-M.5AG 1211 HDC-C-HE-M.75-1.AG 1212 HDC-C-HE-M1.5AG 121 HDC-C-HE-M2.5AG 1214 HDC-C-HE-M4.AG 1215 Crimping tool CTX CM 1.6/ Contct Removl Tool Removl Tool HE Conductor cross-section Insultion stripping length.5 mm 2 AWG mm mm 2 AWG mm 1.5 mm 2 AWG 7.5 mm 2.5 mm 2 AWG mm 4. mm 2 AWG mm.
14 Housing selection RockStr IP66 Size 9 Hood Plug housing, cle entry sidewys Further housings re ville, see Chpter E for IP66 Version Cover (mm) Type Order No. M 32 w. threding 79 HDC 48A TSLU 1M32G RockStr inserts Plug housing, cle entry t top 19 Version Cover (mm) Type Order No. M 32 w. threding 79 HDC 48A TOLU 1M32G se ulkhed housing Version Cover (mm) Type Order No. 38 HDC 48A ALU 6674 with cover 55 HDC 48A ADLU Ø se housing Version Cover (mm) Type Order No. M 32 w. threding 79 HDC 48A SLU 2M32G Ø
HDD series the compact connectors
HDD series the compct connectors RockStr inserts HDD series the compct connectors The HDD series with turned contcts is designed for mny poles in smll spce. The compct housing design sves the user spce
More informationHSB series the heavy-duty connectors
HS series the hevy-duty connectors HS series the hevy-duty connectors The HS series provides users with 3 A vi ech contct with screw connections for sfe nd relile connection. Technicl dt Stndrds / pprovls
More informationMixMate series the high-capacity connectors
MixMte series the high-cpcity connectors RockStr inserts MixMte series the high-cpcity connectors MixMte integrtes xil screw contcts nd TOP connection technology in one plug-in connector. The compct design
More informationE16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A
E1DU, E45DU, E80DU, E140DU electronic overlod relys 0.10 to 140 A Description 2CDC231001F0007 The E1DU up to E140DU re selfsupplied electronic overlod relys, which mens no extr externl supply is needed.
More informationPOWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch
POWER COMBICON Plugs nd Heders PC 6/ for Currents up to 41 A, The PC 6 plug connector fetures highly conductive metl lloys to offer current crrying cpcity of 41 A t rted voltge of 1000 V. A double steel
More informationTA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures
More informationControl stations and enclosures Control station enclosures : insulated, metal and flush mounting
Chrcteristics Control sttions nd enclosures Control sttion enclosures : insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil
More informationControl stations and enclosures
Chrcteristics Control sttions nd enclosures Control sttion enclosures: insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil version:
More informationHK-003,HC SERIES HK-003 HCSERIES. Modular Heavy-current connector WAIN 12-01
HK-00, SERIES HK-00 SERIES Modular Heavy-current connector 12-01 HK-00/0HK-00/2 Heavy-current inserts HE-006 HK-00 Technical characteristics Specifications Approvals Inserts Number of contacts Electrical
More informationRPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
More informationIncremental encoders Solid shaft with square flange pulses per revolution
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil
More informationOperating voltage from 10 KVDC to 15 kvdc. Operating current up to 13 A. 2-5 HV contacts. For cable sizes AWG 26-14
Operating voltage from 10 KVDC to 15 kvdc Operating current up to 1 A 2-5 HV contacts For cable sizes AWG 26-14 Overview Series MC P/N Description Plug Receptacle Cable mount Panel mount Coupling HV-pins
More informationPlug-in connectors for power electronics
Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 480 PHOENIX CONTACT Plug-in
More informationPCB plug-in connectors
Contents CB plug-in connectors.16 mm pitch.16 mm pitch Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 Male connectors with solder connection SU.16H/9 Derating
More informationSafety Relay Unit. Ordering Information. Ultra Slim Safety Relay
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV
More informationHan-Power Energy Bus Components
HARTING Electric Han-Power Energy Bus Components People Power Partnership Han Data Sheet 0080-7 Han-Power T Han-Power T Part-Number Drawing Dimensions in mm 09 12 008 4701 Cable gland please order separately
More information4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
More informationDPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
More information4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
More informationElectrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
More informationHan K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/
Han K 3/0, K 3/2 / Han HC Contents Page Technical characteristics Han K 3/0, Han K 3/2... 14.02 Inserts Han K 3/0, Han K 3/2... 14.03 Hoods/Housings Han 24 HPR for Han K 3/0, Han K 3/2... 14.04 Technical
More informationContents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
More informationDatasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
More informationSINEAX C 402 Alarm unit
for DC currents or DC voltges 00 II () G Appliction The lrm unit SINEAX C40 (Figure ) is normlly pplied to monitor the limits of oth current nd voltge mesurements. The sttus of the device is signlled remotely
More informationContents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
More informationSchematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)
Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if
More informationDC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor
Huell Industril Controls, Inc. 716 1600 Ampere 1500 Volt DC Contctor Ctlog 42716 Mrch 2013, Replces Septemer 2005 42716 Highlights Non-polrized rc chute (series lowout coil) design s stndrd Optionl polrized
More informationRockStar HighPower. Contents. RockStar HighPower Introduction C.2 C.1
ontents Introduction.2 HighPower 250 A.4 4000 V 250 A 1 4 poles HighPower 550 A.10 4000 V 550 A 1 3 poles.1 Introduction Uncompromising power in clever and safe packaging. The modular high-current connector
More informationCrimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
More information- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
More informationDatasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
More informationJS Series Sub-Miniature Slide Switches
Su-Miniture Switches Fetures/enefits Positive detent Low profile IR reflow to 60º solder profile Surfce nd thru hole mounting, DPDT, DPT models RoHS complint Typicl pplictions Telecommuniction products
More informationP3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class. Special features. Dimensions (in mm) B en 1
P3IC / P3ICP Absolute pressure trnsducer Industril Clss Dtenbltt Specil fetures - For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions - Nominl (rted) pressure 10 br to 3000 br -
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationAccessories. Guard grille, streamers 238. Wall rings 248. Connection leads 250. Accessories for ESM and Q-motor 250
Generl informtion Gurd grille, stremers 238 Wll rings 248 Connetion leds 250 Aessories for nd 250 Terminl ox, motor protetion swith, speed setting, str-delt swith, repir swith, pitors 256 237 Contts Tehnology
More informationSTANDARD Signal Circular Connectors
Signal Circular Connectors 3 Ordering information signal circular connectors ll standard connectors are published in this catalog. However, this catalog does not provide customer specific designs or variations.
More informationP3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class" Special features. Dimensions (in mm) B en
P3IC / P3ICP Absolute pressure trnsducer Industril Clss" Dtenbltt Specil fetures For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions Nominl (rted) pressure 10 br to 3000 br Strin
More informationPowermate Range pitch 7.00 Powermate Range pitch 7.00
Contents lug and socket connectors with leaf spring connection.2 lug and socket connectors with TO connection.6.1 lug and socket connectors with leaf spring connection STVS S Derating curve STVS SB Socket
More informationC60H-DC C curve. Catalogue numbers
distriution systems PB104013-34 The supplementary protectors are used in direct current circuits (Industrial control and automations, transport, renewale energy...). They comine the following functions
More informationMechanical Fail-Safe Damper Actuator NFA
2-FON echnicl Fil-Sfe Dmper Actutor NFA ctutor emergency function for djusting ir dmpers in ventiltion nd ir conditioning systems in uildings orque Nm Nominl voltge AC 24..4V / DC 24..V Control: Open-close
More informationProportional directional valves
/4 Proportionl directionl vlves 6.9 Type 4WRE nd 4WREE NG 6 nd p to r p to 8 L/min Contents Function nd configurtion Symols Ordering code Technicl dt 4 Electricl connections, plug-in connectors Integrted
More information3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators
3-Wy Bll Vlve Assemblies Using TAC DurDrive Actutors Note: All vlve sizes ANSI Clss IV (0.01% of C v ) shut off, piped coil-side outlet to A. Tble-5 Selection Chrt3-Wy Mixing Bll Vlve Assemblies with TAC
More informationNORTH AMERICA. Catalog. RockStar Heavy Duty Connectors C A T A L O G
C T L O G 3 NORTH MERIC 2011 2012 RockStar Heavy Duty Connectors Catalog C T L O G 3 RockStar Heavy Duty Connectors Contents RockStar Heavy Duty Connectors RockStar inserts RockStar ConCept modular system
More informationTP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
More informationElectrically controlled directional control poppet valve type UREZ6
LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion
More informationDirectional Valve Size 06 WL 4.06
Directionl Vlve Size 06 WL 4.06 Instlltion dimensions ISO 4401/DIN 24340 6 Directionl vlve size 06 instlltion dimensions ISO 4401 / DIN 24340 6 Functionl Description he directionl control vlves WL 4/06
More informationGeneral characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G V
Description Single and two pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationPROPORTIONAL DIRECTIONAL CONTROL VALVES PILOT OPERATED WITHOUT LVDT TYPICAL PERFORMANCE SPECIFICATIONS W/O LVDT, OPEN INNER LOOP MOUNTING SURFACE
ED8M PILOT OPERTED WITHOUT TYPICL PERFORMNCE SPECIFICTIONS W/O, OPEN INNER LOOP MOUNTING SURFCE NFP/T3.5.1M R1-1984 D8 (Formely D6) NSI/B93.7M-1986 ISO SIZE 8 These proportional directional control valves
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More informationF Series Pushbutton Switches
F Series Features/Benefits Up to 10 poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection
More informationThermal Overcurrent Circuit Breaker 3130
Thermal Overcurrent Circuit Breaker 330 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 60934) of compact design for snap-in panel mounting.
More informationFeed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35
General ordering data Order No. 1608570000 Part designation 2.5/4AN Version EAN 4008190077136 Qty. 100 pc(s). Feed-through terminal,, Tension clamp connection, Wemid, Product notes Product description
More informationS and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
More informationProduct range MEGAlife
Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.
More informationHan Q 1/0 Axial Screw Protected. Available February 2017
Features Compact connector based on size 3 A with a current carrying capacity of 100 A Space saving design due to an angled malemale version IP20 protected male and female contact according to IEC 60 529
More information6/2 way directional valve type 6/2UREM6 and 6/2URMM6
6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS 6 dm 3 up to 35 MP up to 5 /min DT SHEET - SERVICE MNU NUL WK 421 54 11.212 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More informationMK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG AWG AWG Rated surge voltage / pollution severity
or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping
More informationData sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX
PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90, 135 and 180. Suitable for conductor cross-sections up to 2.5 mm². 0.13-2.50 mm² (IEC) / 26-14
More informationDirectional Valve Size 04 WL 4.04
Directionl Vlve Size 04 WL 4.04 Instlltion dimensions ISO 4401/ DIN 24340 4 Directionl vlve size 04 instlltion dimensions ISO 4401 / DIN 24340 4 Functionl description he directionl control vlves WL 4/04
More informationSafety rope switch without reset for simple stop
afety rope switch without reset for simple stop election diagram FP 4-M2 FD 4-M2 FL 4-M2 FR 4-M2 FM 4-M2 FX 4-M2 FZ 4-M2 ACTUATOR 9 ACTUATOR 9 0 CONTACT BLOCK 1 9 21 1NO+ FP FD FL FC 33 34 CONDUIT ENTRIE
More informationRPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
More informationSeries S847 Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.
Snap-action switches Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.en Snap-action switches, S847 Series Dual changeover
More informationFINGER STRIPS. and other EMI shielding products. Characteristics
BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used
More informationSafety rope switches with reset for emergency stop
Safety rope switches with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+ FP FD FL FC 22 33 34 LED signalling light CONDUIT ENTRIES For other available
More informationConnectors according to DIN /IEC
Connetors ording to DIN 41612 /IEC 60603-2 26 ept GmH I Tel. +49 (0) 88 61/25 01 0 I Fx +49 (0) 88 61/55 07 I E-Mil sles@ept.de I www.ept.de Contents Introdution 28 Overview 30 The Stndrd 32 Derting Digrms
More informationMagnetic Overcurrent Circuit Breaker
Magnetic Overcurrent Circuit Breaker 808-... Description ngle pole miniaturised magnetic circuit breakers with unique highspeed operating mechanism and push/pull on/off manual actuation. Fitted with electrically
More informationJUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
More informationHan ES Press. Features. Description. Removal of conductor. Size 6 B - 24 B
Size 6 B - 24 B Features Easy bridging functionality of contacts by means of plug-in jumpers directly on the connector Fast realisation of potential multiplication as well as star and delta bridges Rapid
More informationSafety rope switch with reset for emergency stop
Safety rope switch with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+,, FP FD FL FC 22 33 34,, CONDUIT ENTRIES Threaded conduit entries (standard) With
More informationHarmer Roof Drainage The Cast Iron Range
Cst Iron Roof Outlets - Introduction Hrmer Roof Dringe The Cst Iron Rnge The high qulity Cst Iron Roof Outlet rnge, feturing medium sump nd lrge sump odies, two-wy outlets nd n extensive rnge of lodering
More informationJUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
More information4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
More informationSCREW-TYPE DISTRIBUTION BLOCKS
SCREW-TYPE DISTRIBUTION BLOCKS PRODUCT INFORMATION CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space
More informationInsulated multipole operating tools for front-entry terminal blocks. 1-pole pole pole
Operating Tools Operating tool with partially insulated shaft, ideal for operating terminal blocks Insulated multipole operating tools for front-entry terminal blocks Operating tool (DIN 524), ideal for
More informationSolenoid Locking Safety Switches
HSC HSC Full Size Solenoid Locking Switches Key features: Rugged aluminum die-cast housing 00N locking retention force Flexible Installation: The actuator can be accessed from two directions Select from
More informationFL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
More informationBIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
More informationThermal-Magnetic Circuit Breaker 2210-S291-P9M A
Thermal-Magnetic Circuit Breaker 0-S9-P9M-40033-...A Description Single pole thermal-magnetic circuit breaker with trip-free mechanism and toggle actuation. Two-chamber construction with cascade contact
More informationEP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
More informationMulti-pole terminal strips
Contents for direct mounting Screw connection.2 Screw connection ATEX approval.6.1 for direct mounting Screw connection MK 2/12 2.5 MK 3/2...12 2.5 Width/Height/ø mounting hole Length / mounting dimensions
More information2 pole 10 A PCB mount A1 A
Series - Miniature general purpose relays - 0 A Features Printed circuit mount, general purpose, & Pole relays. - Pole 0 A. - Pole 0 A. - Pole A AC coils & DC coils Cadmium Free contacts (preferred version)
More informationCobra. Mighty Mouse TECHNICAL SPECIFICATIONS
Mighty Mouse Cobra TECHNICL SPECIICTIONS 0-0 triple-start with self-locking coupling nut, exploded view How To Order Mighty Mouse Cobra Plug Connector and ackshell ssemblies Sample Part Number 0-0-2 ZNU
More information40 Series - Miniature PCB relays A. Features
1. = 12.4 1. = 12.4 1. = 12.4 40 Series - Miniature PCB relays 8-10 - 16 A Features 40.31 40.1 40.2 1 & 2 Pole relay range 40.31-1 Pole 10 A (3. mm pin pitch) 40.1-1 Pole 10 A ( mm pin pitch) 40.2-2 Pole
More informationThermal Overcurrent Circuit Breaker 3120-F...
Thermal Overcurrent Circuit Breaker 0-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 6094 with trip free mechanism) offering the choice of
More informationRPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More informationSCREW-TYPE DISTRIBUTION BLOCKS
CONTA-CONNECT SCREW-TYPE DISTRIBUTION BLOCKS Our ideas Your advantages CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power
More information5 mm contact pin pitch PCB or 95 series sockets
1. = 12.4 1. = 12.4 44 Series - Miniature PCB relays 6-10 A Features 44.2 44.62 2 Pole relay range 44.2-2 Pole 6 A ( mm pin pitch) 44.62-2 Pole 10 A ( mm pin pitch) PCB mount - direct or via PCB socket
More informationDirectional Valve. NG 04 WL4.04 Installation dimensions ISO 4401/ DIN A4
Directionl Vlve NG 04 WL4.04 Instlltion dimensions ISO 4401/ DIN 4340 4 Functionl Description he directionl control vlves WL 4/04 consists of housing (1), control spool (5) with two centering springs (4)
More informationSpecifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits
PowerMte Fetures nd Benefits Type P Cle Lockout Complint Specifile Fetures Lockout Plug Sfety Insultor Dimond Clmp Split Pin Contcts Type P Cle Comptile with ll UL 686 listed plugs nd receptcles. 2 3 4
More informationThermal-Magnetic Circuit Breaker 201/-WA
Thermal-Magnetic Circuit Breaker 0/-WA Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring
More information8WH6 ipo Plug-In Terminals
/ Introduction /3 /4 8WH6 through-type terminals /8 8WH6 fuse terminals /9 8WH6 isolating blade terminals /11 8WH6 isolating terminals /13 8WH6 two-tier terminals More technical product information: Service&Support
More informationThermal Overcurrent Circuit Breaker 3120-F...
Thermal Overcurrent Circuit Breaker -F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 694 with trip free mechanism) offering the choice of single
More informationM3 Series Product. Class 0 - protection against electric shock relies upon basic insulation
Product Changeover circuit with rating 16A ong life snap action contacts mechanism Self-cleaning contact action Variety of actuators Screw, front screw or quick connect (faston) terminals dimensions according
More informationAccessories. Guard grilles, streamers 362. Wall rings 372. Connection lines 374. Accessories for Q-motors and energy-saving motors (ESM) 374
Aessories Generl informtion Gurd grilles, stremers 362 Wll rings 372 fns Connetion lines 374 Aessories for Q-motors nd energy-sving motors (ESM) 374 Terminl boxes, pitors, speed setting devies, motor protetion
More informationThermal Overcurrent Circuit Breaker 3120-F...
Thermal Overcurrent Circuit Breaker 0-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 6094 with trip free mechanism) offering the choice of
More information