RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
|
|
- Calvin Sutton
- 5 years ago
- Views:
Transcription
1 Solenoid Operted Directionl Control Vlves RE /2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny position Four-lnd spool - reduced functionl dependence on fluid viscosity ush button mnul override Instlltion dimensions to DIN / ISO 4401 / CETO R121-H Subpltes see dt sheet HA 0002 CSA Upon request Functionl Description The RE3 directionl control vlves consist of housing (1), control spool (5) with two centering springs (4) nd cylindricl operting solenoids (2, 3). The three-position directionl control vlves re fitted with two solenoids nd two springs. Two-position directionl control vlves hve either one solenoid nd one return spring or two solenoids nd detent ssembly. The operting solenoids re DC solenoids. For AC supply the solenoids re provided with rectifier, which is integrted directly into the connectors A, B (6, 7) or inside the coil. The connectors (6, 7) cn be turned by 90. By loosening the nut (8), the solenoids cn be turned or replced without interfering with ny sels of the vlve. In the cse of solenoid mlfunction or power filure, the spool of the vlve cn be shifted by mnul override (9), provided the pressure in T-port does not exceed 25 br. The bsic surfce tretment of the vlve housing (1) is phosphte coted nd the solenoids (2, 3) re zinc coted. A B T A B b 1
2 Ordering Code RE3-06 / Solenoid Operted Directionl Control Vlve Nominl size Number of operting positions two positions 2 three positions 3 Functionl symbols see the tble Functionl symbols Sensing of the end position no designtion without s ensor S1 normlly-open sensor to 50br S2 normlly-open sensor to 210br normlly-closed sensor to 50br S4 no designtion V Sels NBR FM (Viton) Rted supply voltge of solenoids (t the coil terminls) 12 V DC / 2.72 A V DC / 1.29 A V DC / 0.15 A V AC / 1.54 A / 50 (60) Hz V AC / 0.17 A / 50 (60) Hz no designtion D1 D2 D3 D4 D5 Orifice in port without orifice 1.0 mm 1.5 mm 2.0 mm 2.2 mm 2.5 mm The AC coils correspond with E5 type CSA Upon request no designtion T1 Spool speed control orifice without dmping orifice 0.7 mm in solenoid Type of solenoid coil with terminl for the connector, EN with integrted quenching diode nd terminl for the connector, EN with AM-Junior-Timer-connector with integrted quenching diode nd terminl for AM-Junior-Timer connector with integrted rectifier nd terminl for the connector, EN E1 E2 E3A E4A E5 no designtion N1 N2 N3 Mnul overide stndrd covered with retining nut covered with rubber boot with detent ssembly Note: Connector of the position sensor is not supplied (see ordering number on pge 10) FOR REFERRED TYES SEE BOLD TYING IN ORDERING CODE, FUNCTIONAL SYMBOLS AND TABLE OF REFERRED TYES ON AGE 10 2
3 Technicl Dt Nominl size mm 06 Mximum flow L/min see p-q chrcteristics Mx. operting pressure t porte, A, B br 320 Mx. operting pressure t port T br 210, 50 for version S1, S2 nd 210 for version S4 ressure drop br see p-q chrcteristics Hydrulic fluid Hydrulic oils of power clsses (HL, HL) to DIN Fluid temperture rnge for NBR/FM sels C / Ambient temperture, mx. C +50 Viscosity rnge mm 2 /s Mximum degree of fluid contmintion Clss 21/18/15 to ISO 4406 (1999) Mx. llowble voltge vrition % DC: ±10 AC: ±10 Mx. switching frequency 1/h Switching time, on: t =32 mm 2 /s ms DC: AC: Switching time, off: t =32 mm 2 /s ms DC: AC: Duty cycle % 100 Service life cycles 10 7 Enclosure type to EN I 65 Weigt - vlve with 1 solenoid - vlve with 2 solenoids Mounting position Functionl Symbols kg optionl Designtion Symbol Interposition Designtion Symbol Interposition Z11 Z51 C11 H11 Y11 Z11 R11 R21 A51 Y51 J15 C51 3
4 p-q Chrcteristics Mesured t = 32 mm 2 /s Operting limits for mximum hydrulic power trnsferred by the directionl vlve. For respective spool type - see functionl symbols. Operting pressure p [br] Flow Q [L/min] Z11 1 C11 7 H Y11 3 L21 6 B11 9 Y41 7 Z21 1 C41 6 F11 6 R11 4 R21 5 A Y51 3 C51 7 Z51 1 Z71 8 Z81 8 Z91 8 R31 6 H51 8 F51 8 X11 4 K11 8 N11 8 X25 11 J15 1 J75 10 p-q Chrcteristics Mesured t = 32 mm 2 /s ressure drop p relted to flow rte. ressure drop p [br] Flow Q [L/min] -A -B A-T B-T -T Z C H Y L B Y Z C F R R A Y C Z Z Z Z R H F X K N X J J
5 Vlve Dimensions Dimensions in millimetres Vlve with two solenoids 5,1 0,75 12,5 40, ,2 21,5 12, ,9 15,5 A T B 32,5 45,5 73, , ,5 5,3 49,3 37, ,25 b ,4 8 12,4 Vlve with one solenoid "" Spool symbols R11, R21, A51, 51, Y51, Z51, C51, Z71, Z81, Z91, R31, H51, F51, X25 1 Solenoid 2 Solenoid b 3 Mnul override 4 Nme plte 5 Squre ring (4 pcs.) 9.25 x 1.68 supplied with vlve 6 4 mounting holes 7 Electricl connector, EN Spce required to remove connector 9 Retining nut of the solenoid 8 149,5 Vlve with one solenoid "b" Spool symbols X11, Z11, C11, H11, K11, N11, F11 Required surfce finish of interfce b 5
6 Type of the Solenoid Coil Designtion Dimensionl sketch Description E1 Solenoid coil with terminl for the electricl connector, EN ,5 42 E2 Solenoid coil with integrted quenching diode (bipolr trnsil diode) nd terminl for the electricl connector, EN E3A 27,4 Solenoid coil with terminl for AM-Junior-Timer electricl connector. 41,1 E4A Solenoid coil with integrted quenching diode (bipolr trnsil diode) nd terminl for AM-Junior-Timer electricl connector. E Solenoid coil with integrted rectifier nd terminl for the electricl connector, EN Mnul Override no designtion Dimensions STANDARD Type N1 Dimensions CLOSED NUT 20 27,5 Stndrd model of the mnul override. Stndrd retining nut of the solenoid. Mnul override with retining nut. Cn be used fter removing nut. RUBBER BOOT DETENT ASSEMBLY Type N2 Type N3 Dimensions Dimensions Mnul override protected by rubber boot. Mnul override holds the spool in the shiftet position. 6
7 Spool Speed Control Orifice T1 - Dimension Description 2 1 This directionl vlve provides control spool soft shifting by mens of orifice situted in the solenoid rmture.to ensure the proper function of the vlve, perfect ir bleeding of the solenoid is required (byus of bleeding plug (1)). The plugs re ccessible fter removing the rubber boot (2) from the solenoid retining nut (3). 3 Switching times Switching time, on nd off ms The switching times shown re vlid for viscosity = 32 mm 2 /s nd nominl voltge. They re dependent upon working pressure nd flow rte of the directionl control vlve. Orifice in -ort Type D (mm) Dimensions Description D1 1.0 D ort orifices limit the flow into the directionl control vlve. D3 2.0 D4 2.2 Sel ring Attention: When the orifice in port is dditionlly mounted the stndrd used squre ring NBR is replced with O-ring from Viton. D
8 Spool Ship osition Sensor S1, S2 - Circuit digrm of the normlly-open sensor N Sensor Connector S4 - N Sensor Circuit digrm of the normlly-closed sensor Connector The proximity sensor trnsforms the spool position into n electricl step signl. It cn be used with directionl control vlves with one or two solenoids. Technicl Dt of the Sensor S1, S4 S2 Rted power supply voltge V 24 DC ower supply voltge rnge V DC Rted current ma 200 Enclosure type of sensor to EN I 67 Mx. operting pressure br Switching frequency Hz 1000 Ambient temperture rnge C Technicl Dt of the Connector ower supply voltge rnge V DC Ambient temperture rnge C Indiction yellow LED Two-osition Directionl Control Vlve Dimensions in millimeters Signl of solenoid (b) Signl of sensor S (Sb) LED S1, S2 - normlly-open S4 - normlly-closed S1, S2 S ON OFF OFF ON S (Sb) (b) 1 53,5 26, (176) Three-osition Directionl Control Vlve Dimensions in millimeters Signl of solenoid Signl of sensor S (Sb) LED S1, S2 - normlly-open S4 - normlly-closed S1, S2 S4 b S Sb S Sb S - LED Sb - LED S - LED Sb - LED ON ON OFF OFF OFF ON ON OFF S Sb b 8 268
9 Spre rts 1 Electricl connector 2 Solenoid coil 3 Nut with sel 4 Orifice in port with sel ring 5 Sensor 6 Connector of position sensor with LED 7 Sel kit 8 Mounting bolts 8 B 1 2 A b T 3 A B 4 7 Solenoid coil Coil type Solenoid type E1 E2 E3 E4 E5 Ordering number Solenoid retining nut with sel Type of the nut Sel ring Ordering number Stndrd nut Closed nut x 2 Nut with rubber boot Nut with detent ssembly Orifice in port Type D (mm) Sel ring Ordering number D D D x D D Connector of position sensor Type designtion Model Mx. input voltge Ordering number K02 connector of position sensor with LED V DC S1 normlly-open sensor V DC S2 normlly-open sensor V DC S4 normlly-closed sensor V DC Sel kit Type Dimensions, number Ordering number Stndrd - NBR x 1.68 (4 pcs.) 17 x 1.8 (2 pcs.) Viton 9.25 x 1.78 (4 pcs.) x 1.78 (2 pcs.)
10 Mounting bolts Dimensions, number Tightening torque Ordering number M5 x 45 DIN (4 pcs.) 8.9 Nm Electricl connector, EN Type Connector A grey Connector B blck designtion Ordering number K K K K Electricl Connector, EN Designtion Type Model Mx. input voltge K1 Connector B (blck) without rectifier - M16x1.5 Connector A (grey) ( bushing bore 6-8 mm) 230 V AC/DC K5 Connector B (blck) without rectifier - M16x1.5 Connector A (grey) ( bushing bore 4-6 mm) 230 V AC/DC Connector B (blck) without rectifier with LED K2 nd quenching diode - M16x V DC Connector A (grey) ( bushing bore 6-8) K3 Connector B (blck) with rectifier - M16x1.5 Connector A (grey) ( bushing bore 6-8 mm) 230 V AC Connector B (blck) with rectifier with LED K4 nd quenching diode - M16x V AC Connector A (grey) ( bushing bore 6-8 mm) Recommended solenoid coils used with electrcil connector with rectifiers - type designtion K3, K4 Rted supply source voltge (permissible rted voltge vrition ±10 %) Type designtion of the solenoid voltge 230 V AC / 0.17 A / 50 (60) Hz referred Types of Vlves Type Ordering Number Type Ordering Number RE3-062Z11/01200E RE3-063Y11/02400E RE3-063Z11/01200E RE3-062R11/02400E RE3-062Z51/01200E RE3-062R21/02400E RE3-063C11/01200E RE3-062A51/02400E RE3-062C51/01200E RE3-062Y51/02400E RE3-063H11/01200E RE3-062J15/02400E RE3-063Y11/01200E RE3-062Z11/23050E RE3-062R11/01200E RE3-063Z11/23050E RE3-062R21/01200E RE3-062Z51/23050E RE3-062A51/01200E RE3-063C11/23050E RE3-062Y51/01200E RE3-062C51/23050E RE3-062J15/01200E RE3-063H11/23050E RE3-062Z11/02400E RE3-063Y11/23050E RE3-063Z11/02400E RE3-062R11/23050E RE3-062Z51/02400E RE3-062R21/23050E RE3-063C11/02400E RE3-062A51/23050E RE3-062C51/02400E RE3-062Y51/23050E RE3-063H11/02400E RE3-062J15/23050E Cution! For pplictions outside the given prmeters, plese consult us. For directionl control vlves with two solenoids, one solenoids must be without power before the other solenoid cn be powered chrged. Switching time for directionl vlves with detent ssembly (impulse control) should not be shorter thn 60 ms. With directionl vlves with cushioned spool shifting, the switching time must correspond with the shifting time. Other for spool symbols on request. The pcking foil is recyclble. The protective plte cn be returned to mnufcturer. Mounting bolts or studs must be ordered seprtely. The technicl informtion regrding the product presented in this ctlogue is for descriptive purposes only. It should not be construed in ny cse s gurnteed representtion of the product properties in the sense of the lw. ARGO-HYTOS s.r.o. CZ Vrchlbí Tel.: , Fx: E-mil: sles.cz@rgo-hytos.com Subject to ltertion without notice!
RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009
Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009
More informationRPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
More informationRPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
More informationDirectional Valve Size 06 WL 4.06
Directionl Vlve Size 06 WL 4.06 Instlltion dimensions ISO 4401/DIN 24340 6 Directionl vlve size 06 instlltion dimensions ISO 4401 / DIN 24340 6 Functionl Description he directionl control vlves WL 4/06
More informationDirectional Valve Size 04 WL 4.04
Directionl Vlve Size 04 WL 4.04 Instlltion dimensions ISO 4401/ DIN 24340 4 Directionl vlve size 04 instlltion dimensions ISO 4401 / DIN 24340 4 Functionl description he directionl control vlves WL 4/04
More informationDirectional Valve. NG 04 WL4.04 Installation dimensions ISO 4401/ DIN A4
Directionl Vlve NG 04 WL4.04 Instlltion dimensions ISO 4401/ DIN 4340 4 Functionl Description he directionl control vlves WL 4/04 consists of housing (1), control spool (5) with two centering springs (4)
More informationRPE3-04. Functional Description HA /2010. Directional Control Valves Solenoid Operated. Replaces HA /2007
Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) 10/2010 Replaces 12/2007 4/3-, 4/2- way directional control valves with solenoid control Solenoids
More informationRPE3-04. Functional Description HA /2013. Directional Control Valves Solenoid Operated. Replaces HA /2010
Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) HA 4014 09/2013 Replaces HA 4014 10/2010 4/3-, 4/2- way directional control valves with solenoid
More information4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
More informationRPEW4-06. Functional Description HA /2005. Solenoid Operated Directional Control Valves with Wirebox 1/2 NPT 1/2 NPT. Replaces HA /2004
Solenoid Operated Directional Control Valves with Wirebox RPEW4-06 2/2005 Size 06 p max up to 320 bar Q max up to 80 L/min Replaces 2/2004 4/3, 4/2 way directional control valves Four-land spool - reduced
More informationElectrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
More information4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl
More information2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation
0/0 /, / nd / directionl poppet vlve with solenoid ctution.7 Type M-.SEW...LX Size Up to 0 r Up to 0 L/min Contents Function nd configurtion Symols 0 Specifiction 0 Technicl dt 0 Electricl dt 0 Chrcteristic
More information4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
More informationRPE2-04. Functional Description HA /2002. Solenoid Operated Directional Valves. Replaces HA /2000
Solenoid Operated Directional Valves RPE2-04 HA 4012 3/2002 Size 04 p max up to 320 bar Q max up to 20 l/min Replaces HA 4012 6/2000 Special model - special installation dimensions 4/3-, 4/2- and 3/2-way
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More informationSD2E-A3. Functional Description. 3/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2013. Replaces HA /2012
3/2 Way Solenoid Operated Directional Control Valves Spool Type SD2E-A3 3/4-6 UNF p max 350 bar (5076 PSI) Q max 30 L/min (7.9 GPM) HA 404 /203 Replaces HA 404 07/202 Hardened and precision working parts
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More informationElectrically controlled directional control poppet valve type UREZ6
LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion
More informationSolenoid operated spool valve with soft switching NG10 ISO
WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool
More informationDirectional Control Valves. General Description. Features. Specifications
echnicl Informtion Generl Description directionl control vlves re high performnce, 5-chmer, direct operted, wet rmture, solenoid controlled, 3 or 4-wy vlves. hey re ville in 2 or 3-position nd conform
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
More informationSD2E-A4. Functional Description. 4/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2012. Replaces HA /2010
4/2 Way Solenoid Operated Directional Control Valves Spool Type SD2E-4 /4-16 UNF p max 50 bar (5076 PSI) Q max 0 L/min (7.9 GPM) 7/2012 Replaces 10/2010 4/2 way cartridge valves solenoid operated spool
More informationFunctional Description
4/2 Way Solenoid Operated Directional Control Valves Spool SD2E-A4 Type 3/4-16 UNF p max 350 bar (5076 PSI) Q max 30 L/min (7.9 GPM) 01/2005 4/2 Way cartridge valves solenoid operated spool directed Manual
More informationRPEH4-16. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2002
4/2 and 4/3 Way Directional Control Valves Pilot Operated RPEH4-16 HA 4023 2/2003 Size 16 p max up to 320 bar Q max up to 300 L/min Replaces HA 4023 2/2002 Solenoid pilot operated directional valves (RPEH)
More information3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94
3/2 nd 4/2-wy Directionl oppet Vlves with Solenoid Opertion Model M-SED 6, Series X Size 6 000 SI (30 r) 6.6 GM (2 L/min) R 22 049/06.98 R 22 049/06.98 Replces: 02.96 Fetures: Direct operted directionl
More informationProportional directional valves
/4 Proportionl directionl vlves 6.9 Type 4WRE nd 4WREE NG 6 nd p to r p to 8 L/min Contents Function nd configurtion Symols Ordering code Technicl dt 4 Electricl connections, plug-in connectors Integrted
More information11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
More informationSD2E-A4. Functional Description. 4/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2014. Replaces HA /2013
/ Way Solenoid Operated Directional Control Valves Spool Type SDE- /-6 UNF p max 50 bar (5076 PSI) Q max 0 L/min (7.9 GPM) 07/0 Replaces 0/0 Hardened precision working parts High flow capacity High transmitted
More informationRNEH4-25. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2012
4/2 and 4/3 Way Directional Control Valves Pilot Operated RNEH4-25 HA 4024 7/2015 Size 25 (D 08) 320 bar (4600 PSI) 600 L/min (159 GPM) Replaces HA 4024 6/2012 Solenoid pilot operated directional valves
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
More informationSD3E-B2. Functional Description. 2/2 Way Solenoid Operated Directional Control Valves Poppet Type HA /2012. Replaces HA /2010
/ Way Solenoid Operated Directional Control Valves Poppet Type SD3E-B 7/8-4 UNF p max 40 bar (609 PSI) Q max 75 L/min (9.8 GPM) H 4063 7/0 Replaces H 4063 0/00 / way cartridge valves solenoid operated
More informationp max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60
4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
OM SOLENOID VLVE HD1N SIZE 025 Fetures HD1 N Series (for 7 M) 1. ompct 2. Dust- nd wter-proof of highest level (I67), thnks to use of M12-4 pin connector 3. Since it opertes t low currency, it cn e connected
More informationProportional pressure reducing valve type 3WZCDE6 is a
LICION roportionl pressure reducing vlve type 3WZCDE6 3-wy electriclly controlled, proportionl pressure reducing vlve type 3WZCDE6 is used for reducing pressure in hydrulic system, in continuous wy, s
More informationRPEW4-10. Functional Description HA /2012. Solenoid Operated Directional Control Valves with Wirebox. Replaces HA /2006
Solenoid Operated Directional Control Valves with Wirebox RPEW-10 5/2012 Size 10 (D 05) 350 bar (5076 PSI) 10 L/min (37 GPM ) Replaces 2/2006 /3, /2 way directional control valves Four-land spool - reduced
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
More informationDSE /116 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 90 l/min
83 2/116 ED DIRECIONL VLVE WIH ROORIONL CONROL SULE MOUNING ISO 41-05 p mx 320 r Q mx l/min MOUNING INERFCE OERING RINCILE ISO 41-05-04-0-05 (CEO 4.2-4-05-320) 21.4 6.3 16.7 3.2 54.8 37.3 27 46 32.5 ø
More information4/2 and 4/3 Solenoid Directional Valve, ISO Size 03
4/ nd 4/3 Solenoid Directionl Vlve, ISO Size 03 Q mx = 60 l/min, p mx = 315 r wo-stge design, with EX-sfty solenoid coil Vlve: High switching relilility thnks to two-stge follower spool design Slip-on
More information6/2 way directional valve type 6/2UREM6 and 6/2URMM6
6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS 6 dm 3 up to 35 MP up to 5 /min DT SHEET - SERVICE MNU NUL WK 421 54 11.212 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...
More informationSpecial Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4
Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
LOW-OWE ONSUMTION ILOT-OETED DIETIONL ONTOL VLVE * SIZE 04/0/10 This is n ssemly of solenoid vlve nd directionl control vlve to operte the directionl control vlve (min vlve) y mens of the pilot pressure
More informationCartridge Valves Technical Information Directional Valves DCV 03
OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
More informationPRM2-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013. Size 06 p max 350 bar Q max 40 L/min
Proportional Directional Control Valves Size 06 p max 50 bar Q max 40 L/min PRM-06 HA 5104 /014 Replaces HA 5104 /01 Compact design with integrated High reliability Simple replacement of the exciting coils
More information4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
More information3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation
3/3, 4/2 nd 4/3 directionl poppet vlve with solenoid ctution RE 22035/06.10 Replces: 12.08 1/16 Type SEC Size 6 Component series 1X Mximum operting pressure 420 r [6100 psi] Mximum flow 25 l/min [6.6 US
More informationPneumatic. PVL Inline Valves. Catalogue No.
Pneumtic PVL Inline Vlves Ctlogue No. GB-c PVL High flow, compct size Push-in threded connection DIN ril block mounting Light weight construction Inline stnd lone stckble version Avilble in 2 x 3/2-5/3
More informationIFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08
IF DG8 SOLENOID CONROLLED ILO OERED DIRECIONL VLVE SIZE NG/CEO8 Certifiction CE Certified -119115 1 ISO 91: FEurES : Highest performnce in NG Optimized spool design to reduce flow force roven qulity through
More informationE16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A
E1DU, E45DU, E80DU, E140DU electronic overlod relys 0.10 to 140 A Description 2CDC231001F0007 The E1DU up to E140DU re selfsupplied electronic overlod relys, which mens no extr externl supply is needed.
More informationBlocked for new applications / Für Neuanwendung gesperrt
locked for new pplictions / Für Neunwendung gesperrt RE 29 075/05.02 Replces: 02.0 roportionl directionl vlve, pilot operted with electricl position feedbck ype 4WRKE Nominl sizes 0 to 35 Series 3 Mximum
More informationIFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07
ILO OERED DIRECIONL VLVE SIZE NG-1 / CEO-7 Certifiction CE Certified -119115 1 ISO 91: FEURES : Highest performnce in NG 1 Optimized spool design to reduce flow force roven qulity through 1 million endurnce
More informationDS /217 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE SUBPLATE MOUNTING ISO p max 320 bar Q max 150 l/min MOUNTING SURFACE
41 310/217 ED DS5 SOLENOID OERED DIRECIONL CONROL VLVE SULE MOUNING ISO 4401-05 p mx 320 r Q mx 150 l/min MOUNING SURFCE OERING RINCILE ISO 4401-05-04-0-05 (CEO 4.2-4-05-320) 21.4 6.3 16.7 3.2 54 50.8
More informationTA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures
More informationSolenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
More informationProportional directional valve, pilot operated with electrical position feedback and integrated electronics (OBE)
roportionl directionl vlve, pilot operted with electricl position feedck nd integrted electronics (OE) ype 4WRKE Nominl sizes 0 to 35 Component series 3 Mximum operting pressure 350 r Mximum flow 3000
More informationProportional directional valve, pilot operated with electrical position feedback and integrated electronics (OBE)
roportionl directionl vlve, pilot operted with electricl position feedck nd integrted electronics (OE) RE 29075/08.04 Replces: 05.02 /22 ype 4WRKE Nominl sizes 0 to 35 Component series 3 Mximum operting
More informationDirectional spool valves, pilot-operated, with hydraulic or electro-hydraulic actuation
Directionl spool vlves, pilot-operted, with hydrulic or electro-hydrulic ctution WEH nd WH RE 24751 Edition: 2016-06 Replces: 08.08 Size 10 32 Component series 4; 6; 7 Mximum operting pressure 350r [5076psi]
More informationSolenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
More informationSR1A-A2. Functional Description HA /2012. Directly Operated Pressure Relief Valves. Replaces HA /2010. Screw-in cartridge design
Directly Operated Pressure Relief Valves SRA-A2 HA 5063 7/202 3/4-6 UNF p max 350 bar (5080 PSI) Q max 30 L/min (7.9 GPM) Replaces HA 5063 8/200 Screw-in cartridge design 4 pressure ranges Pressure setting
More informationEXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 6X NEC STANDARD
EXLOSION ROOF DIRECIONL CONROL VLVE YE ED SERIE X NEC SNDRD CRCERISICS Hydrulic : Cetop. Mximum pressure in service : r. Nominl Flow mx. : 0 l/mn.(see tle) Directionl control vlves re solenoid operted
More informationp max 350 bar Q max 1100 l/min M Maximum flow rate from port P to A - B - T l/min 1100
41 440/107 ED DS10 ILO OERED DISRIUOR SOLENOID OR HYDRULIC (DSC10) CONROLLED SULE MOUNING ISO 4401-10 (CEO 10) p mx 350 r Q mx 1100 l/min MOUNING INERFCE OERING RINCILE ISO 4401-10-08-0-94 (CEO 4.2-4-10-350)
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
SOLENOID VALVEHD*-WY* SIZE Fetures HD3 Series (for MP) HD Series (for MP). ompct. Directly controllle y. High pressure nd lrge cpcity progrmmle controller 3. Incresed rted flow rte since the vlve opertes
More informationVPN1-06. Functional Description HA /2008. Pilot Operated Pressure Relief Valves. Replaces HA /2002
Pilot Operated Pressure Relief Valves VPN-06 HA 56 4/2008 Size 06 p max up to 320 bar Q max up to 70 L/min Replaces HA 56 3/2002 Cartridge, modular and in-line design Five pressure ranges Two pressure
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More informationVRN2-10. Functional Description HA /2008. Pilot Operated Pressure Reducing Valves. Replaces HA /2003
Pilot Operated Pressure Reducing Valves VRN2-0 HA 554 7/2008 Size 0 p max up to 20 bar Q max up to 50 (80) L/min Replaces HA 554 2/200 Screw-in cartridge valve for manifold mounting and stacking assemblies
More information2/2, 3/2 and 4/2 directional seat valve with mechanical, manual or fluidic operation
/, / nd / directionl set vlve with mechnicl, mnul or fluidic opertion RE 0/10.06 /1 ype M-.S.. Sizes 6 nd 10 Component series X Mximum operting pressure 0/ r Mximum flow 0 l/min H701+70+70 le of contents
More informationPROPORTIONAL DIRECTIONAL CONTROL VALVES PILOT OPERATED WITHOUT LVDT TYPICAL PERFORMANCE SPECIFICATIONS W/O LVDT, OPEN INNER LOOP MOUNTING SURFACE
ED8M PILOT OPERTED WITHOUT TYPICL PERFORMNCE SPECIFICTIONS W/O, OPEN INNER LOOP MOUNTING SURFCE NFP/T3.5.1M R1-1984 D8 (Formely D6) NSI/B93.7M-1986 ISO SIZE 8 These proportional directional control valves
More informationPress control block PSB Type approved according to DIN EN 693
Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording
More informationDirectional seat valves, direct operated, with solenoid actuation. Type SEW. Contents. Features. RE Edition: Replaces: 07.
Directionl set vlves, direct operted, with solenoid ctution ype SEW RE 22058 Edition: 2013-06 Replces: 07.09 Size 6 Component series 3X Mximum operting pressure r 9150 psi] Mximum flow 25 l/min [6.6 gpm]
More information2 Way Slip-In Cartridge Valves Series CE, CP, C
tlogue H-3500/UK hrcteristics Wy Slip-In rtridge lves Series E,, wy slip-in crtridge vlves re hydruliclly controlled set vlves tht re designed for compct block instlltion. Slip-in crtridge, cover, nd pilot
More informationSafety Relay Unit. Ordering Information. Ultra Slim Safety Relay
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV
More informationJUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
More informationDirectional spool valves, direct operated, with solenoid actuation. Type WE VP1. Features. Contents. RE VP1 Edition: Replaces:
Directionl spool vlves, direct operted, with solenoid ctution ype WE V1 RE 23178-V1 Edition: 217-6 Replces: 216-6 Size 6 Component series 5X Mximum operting pressure 35 r Mximum flow 7 l/min H813 Fetures
More informationPRM7-04. Functional Description HA /2012. Proportional Directional Control Valves. Replaces HA /2009
Proportional Directional Control Valves PRM7-6/ Size D () bar (6 PSI) L/min (. GPM ) Replaces /9 Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis
More informationDirectional spool valves, pilot-operated, with electro-hydraulic actuation. Type WEH =UR. Features. Contents. RE Edition:
Directionl spool vlves, pilot-operted, with electro-hydrulic ctution ype WEH =UR RE 24802 Edition: 2016-12 Solenoid coil is n pproved component with UR-mrking ccording to UL 906 Size 10 32 Component series
More informationDPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
More informationPRM7-06. Functional Description HA /2006. Proportional Directional Control Valves. Replaces HA /2002
Proportional Directional Control Valves PRM7-6 HA 59 /6 Size D (6)...6 PSI ( bar)...6 GPM ( L/min) Replaces HA 57 / Digital control Compact design Operated by proportional solenoids High sensitivity and
More informationPRM7-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013
Proportional Directional Control Valves PRM7-6 / Size 6 (D ) bar (76 PSI) L/min (.6 GPM) Replaces HA 7 / Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis
More information3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators
3-Wy Bll Vlve Assemblies Using TAC DurDrive Actutors Note: All vlve sizes ANSI Clss IV (0.01% of C v ) shut off, piped coil-side outlet to A. Tble-5 Selection Chrt3-Wy Mixing Bll Vlve Assemblies with TAC
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
More informationMechanical Fail-Safe Damper Actuator NFA
2-FON echnicl Fil-Sfe Dmper Actutor NFA ctutor emergency function for djusting ir dmpers in ventiltion nd ir conditioning systems in uildings orque Nm Nominl voltge AC 24..4V / DC 24..V Control: Open-close
More informationJUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
More informationSchematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)
Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if
More information4/3, 4/2 and 3/2 directional valve with wet-pin DC solenoids
1/12 4/3, 4/2 nd 3/2 directionl vlve with wet-pin DC solenoids RE 23178-XN-B2/04.10 Replces: 05.04 Type WE 6../.E..XN Size 6 Component series 6X Mximum operting pressure 350 r Mximum flow 80 l/min HAD7194
More informationVPN2-10/MR. Functional Description HU /2008. Pilot Operated Pressure Relief Valves. Replaces HU /2005
Pilot Operated Pressure Relief Valves VPN2-10/MR Size 3/8 (10)...5076 PSI (350 bar)...40 GPM (150 L/min) 7/2008 Replaces 2/2005 Modular and in-line design Five pressure ranges Two pressure adjustment options:
More informationTechnical specification. Model Max.flow rate (l/min) Working pressure (MPa) Single solenoid double solenoids. Weight (kgs) Spool return
WE series solenoid directionl control vlves WE series directionl control vlves re solenoid operted directionl spool vlves, these vlves re used to the strt, stop nd direct oil flow. echnicl specifiction
More informationSolenoid Pilot Operated Directional Control Valve
Solenoid ilot Operted Directionl Control Vlve Nomenclture 1 pplicle fluid code No designtion: etroleum-sed hydrulic fluid H: Wter-glycol hydrulic fluid F: hosphte ester hydrulic fluid 2 3 Model No. ME:
More informationDirectional spool valves, direct operated, with solenoid actuation. Type 5-.WE. Features. Contents. RE Edition: Replaces:
Directionl spool vlves, direct operted, with solenoid ctution Type 5-.WE RE 23352 Edition: 2015-09 Replces: 2012-04 5-chmer version Size 10 Component series 5X Mximum operting pressure 420 r [6091 psi]
More informationHot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")
Delivery ddress: Mckenrodtstrße 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Phone: +9 66 6003-0 Fx: +9 66 6003-607 E-mil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex CM0 DY, UK Phone: + 79 635533
More informationApplication Examples of Air-piloted Valves
ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht
More informationRPEK1-03/B. Functional Description HA /2011. RPEK1-03 Modular Valve Assembly. D n 03 p max 250 bar (3626 PSI) Q max 60 l/min (15.
REK-03 Modular Valve ssembly REK-03/ /0 D n 03 p max 50 bar (366 SI) Q max 60 l/min (5.8 GM) Compact modular valve system assembly Easy to build complex circuits he possibility of subsequent rebuilding
More informationSpark Plug Fouling 3.0 Liter OptiMax
WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected
More informationNT Series SSS MARK-II
efore using the product, plese check the For ltest informtion, DF ctlogs nd opertion mnuls N Series SSS MRK-II se unit Unit with ll options Fetures Extensive vritions wide rnge of functions nd other options
More informationRoller and ball bars for easy and safe die change
Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension
More information2/2, 3/2 and 4/2 directional seat valves with solenoid actuation
1/14 /, 3/ nd 4/ directionl set vlves with solenoid ctution RE 058-XE-B/09.13 Replces: 01.10 ype M-.SEW 6...XE... Size 6 Component series 3X Mximum operting pressure 40 r Mximum flow 5 l/min EX units For
More informationEx-proof proportional valves multicertification ATEX, IECEx, EAC
Tble F600-5/E Ex-proof proportionl vlves multicertifiction ATEX, IECEx, EAC DLHZA-T-040 vlve body ex-proof solenoid ex-proof trnsducer (only for proportionl -T vlves) threded connections for cble clmp
More information40 l/min (11 GPM) p max
Proportional Directional Control Valve, with Analog Control Electronics PRM2-06 Functional Description Size 06 (D03) Q max 40 l/min (11 GPM) p max 350 bar (5100 PSI) Technical Features Direct acting, proportional
More informationData Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
More information