2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
|
|
- Marylou Davidson
- 5 years ago
- Views:
Transcription
1 2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted directionl set vlves re direct cting, pressure lnced, mnifold-mounting vlves with size 03 interfce to ISO he min components of the vlves re mnifold-mounting ody nd the push-in 2/2 or 3/2 directionl set vlve crtridge (type W1 ). Dependent on the operting position, the ports re either closed with virtully zero lekge, or open nd flow is possile in either direction. he overlpped model (W2 ) fetures closed crossover chrcteristic i.e. during the vlve's switching period, there is no connection etween the ports nd therefore only miniml loss of flow/pressure occurs. hese solenoid operted set vlves re lso ville with or without mnul With crtridge vlve, type W1 Interfce to ISO idirectionl set-vlve shut-off or flow Version with closed crossover (overlp) With or without mnul override Hnd lever cn e fitted on solenoid With optionl push-in check vlve or orifice Externl crtridge prts re zinc plted nd chromited (CrVI-free) High pressure wet-rmture solenoids he slip-on coil cn e rotted, nd it cn e replced without opening the hydrulic envelope override, nd with the option of n dditionl hnd lever. For pplictions where check vlve or n orifice in the port is necessry, either of these fetures cn e included s n option. hese solenoid operted set vlves re predominntly used in certin moile nd industril pplictions where lek-tight shut-off functions re crucilly importnt. Exmples re where lods, tensions, or clmping forces must e held without lekge. he mnifold-mounting ody is phosphted. ll externl prts of the crtridge re zincnickel plted to DIN nd re thus suitle for use in the hrshest operting environments. he slip-on coils cn e replced without opening the hydrulic envelope nd cn e positioned t ny ngle through echnicl dt Generl chrcteristics Designtion Design Mounting method Description, vlue, unit ightening torque 5.5 Nm 0.25 Size Weight Mounting ttitude mient temperture rnge 2/2, 3/2, 3/3, 4/3 or 4/4 solenoid operted directionl set vlve mnifold-mounting, idirectionl set-vlve shut-off, direct cting poppet nd vlve-spool design (pressure lnced) with underlpped or overlpped spool 4 x 5,5 holes for M5x30 cp screws size 03 interfce to ISO / DIN kg (2/2 3/2 models) 2.50 kg (3/3 4/4 models) unrestricted -25 C +50 C Reference: EN-00 Issue: /8
2 Hydrulic chrcteristics Mximum operting pressure Mximum flow rte Description, vlue, unit 315 r 20 l/min 10 l/min (series W2, with closed crossover) Flow direction see symols, tle on pge 3 Hydrulic fluid HL nd HL minerl oil to DIN ; for other fluids, plese contct UCHER Hydrulic fluid temperture rnge Viscosity rnge Minimum fluid clenliness Clenliness clss to ISO 4406 : C +80 C mm 2 /s (cst), recommended mm 2 /s (cst) clss 20/18/15 Electricl chrcteristics Supply voltge Supply voltge tolernce Description, vlue, unit 12 V DC, 24 V DC 115 V C, 230 V C (50 60 Hz) others y consulttion ± 5 % Nominl power consumption mx. 38 W (24 V DC = 31 W) Switching time Reltive duty cycle rotection clss to ISO / EN refer to crtridge vlve - see Relted dt sheets 100 % I 65 (when connector plugs re properly fitted) Electricl connection 3-pin squre plug to DIN EN erformnce grphs Detiled performnce dt nd other hydrulic chrcteristics cn e found in the dt sheet for the respective 2/2 or 3/2 solenoid operted crtridge set vlve (series W1 ) tht is fitted. See Relted dt sheets. ENION! he performnce figures in the dt sheet for the crtridge vlve refer just to the crtridge itself. ke into ccount the dditionl pressure drop in the ody into which it is fitted. p = f (Q) ressure drop - Flow rte chrcteristic through orifice (metering function) p [r] 0026.i Ø 1.0 Ø 1.2 Ø 1.4 p = f (Q) ressure drop - Flow rte chrcteristic through push-in check vlve p [r] 0027.i Q [l/min] Q [l/min] 1.2 nd 1.4 orifices drilled out y customer! 2/8
3 Code Symols Remrks Operting principle 2-wy circuit (with 2/2 crtridge set vlve) 22 S 22 O For 2/2 circuits, the customer must plug the port! For 2/2 circuits, the customer must plug the port! 3-wy circuit (with 3/2 crtridge set vlve) 32 S 32 O For 2/2 circuits, the customer must plug the port! For 2/2 circuits, the customer must plug the port! 3-wy circuit (with 2/2 crtridges) 33 R o chieve the 4th vlve function (the shded ox), energise the two solenoids nd simultneously! 43 F o chieve the 4th vlve function (the shded ox), energise the two solenoids nd simultneously! 4-wy circuit (with 3/2 crtridge set vlves) 43 G o chieve the 4th vlve function (the shded ox), energise the two solenoids nd simultneously! 44 o chieve the 4th vlve function (the shded ox), energise the two solenoids nd simultneously! 3/8
4 4 Dimensions & sectionl view 2/2 nd 3/2 solenoid operted directionl set vlve (single-solenoid model) 58.5 M = 2.7 ±0.3 [Nm] 4 M = 5 ± 0.25 [Nm] M5 2) Ø ) 0,01 / 100 4) Ø 45 Rz mx 4 3/3, 4/3, nd 4/4 solenoid operted directionl set vlve (doule-solenoid model) ) Sel kit no. DS-098-N 3) Item Qty. Description 1 4 O-ring no ,00 x 1,78 N O-ring no ,35 x 1,78 N O-ring no ,25 x 1,78 N O-ring no ,60 x 1,78 N O-ring no ,52 x 1,78 N90 4/8
5 1) Cn e chosen with or without mnul override. (see ordering code) 2) Vlve mounting olts M5x30 (included in the delivery) 3) Sel kit with Viton sels, no. DS-098-V 4) Required surfce finish on the mounting fce (vlve pd) 5/8
6 5 Options 5.1 Hnd lever fitted on solenoid s n option, the W2N / W2 series of solenoid operted directionl set vlves re ville with n dditionl hnd lever. wo models cn e supplied; the HH hnd lever with detent feture, nd the HHN hnd lever without detent feture. Hnd levers cn only e fitted to vlves tht hve mnul override. Ø ) Ø ) Operted position 5.2 ush-in check vlve o prevent uncontrolled ck-pressure effects or ck-flow of oil, series W2N / W2 solenoid operted directionl set vlves cn e supplied with n optionl push-in check vlve, type RC-5, nd specil ody. he check vlve llows free flow from to or, ut prevents flow in the opposite direction, with no lekge. 5.3 Orifice (metering function) n orifice disc (type D10, 1.0 mm) must e used when, s consequence of the operting conditions tht exist, circuit opertions my result in flow rtes tht exceed the performnce limit of the vlve. he orifice disc fitted for this purpose is 1.0 mm. Customers my drill it out to 1.4 mm mximum (see performnce grphs). ppliction: when severl vlves re supplied in prllel, for instnce, nd the supply pressure in drops elow the pressure in or (nother circuit is vented, or lightlyloded ctutor is operted). he pressure in service line or is then higher, ut the check vlve prevents it from flling during such opertions in other circuits. ppliction: when used for chrging ccumultors, for instnce, or when the solenoid operted directionl set vlves re used to pilot other vlves. 6/8
7 6 Instlltion informtion ENION! Only qulified personnel with mechnicl skills my crry out ny mintennce work. Generlly, the only work tht should ever e undertken is to check, nd possily replce, the sels. When chnging sels, oil or grese the new sels thoroughly efore fitting them. When fitting the vlves, use the specified tightening torque for the mounting olts. No djustments re necessry, since the crtridges re set in the fctory. 7 Ordering code Ex. W2 N 32S N 6 _ 24 VDC + HH _ W2 N = solenoid directionl set vlve, mnifold mtg. = open crossover (stndrd) = closed crossover, (only possile with 3/2, 4/3, nd 4/4 functions) 22 S = 2/2 function, closed 22 O = 2/2 function, connected 32 S = 3/2 function, closed 32 O = 3/2 function, connected 33 R = 3/3 function,, nd closed 43 F = 4/3 function, connected 43 G = 4/3 function, connected 44 = 4/4 function, nd connected N = without push-in check vlve or orifice (stndrd) R = with push-in check vlve, type RC-5 (in port) D10 = with orifice disc, type D10 (in port) 6 = ISO size 03 interfce... Q = stndrd model - see relevnt dt sheets Z... R = specil fetures - plese consult UCHER Nitrile sels Viton sels G = with mnul override D I = without mnul override = design numer, set vlve (omit when ordering new units)... = voltge e.g. 24 (24 V) without = without hnd lever (stndrd) + HH = with hnd lever with detent + HHN = with hnd lever without detent = design numer, hnd lever (omit when ordering new units) 7/8
8 8 Relted dt sheets Reference (Old no.) Description (i-01) Orifice flow chrt (i-31) Size 03 interfce to ISO (W-2.11) 2/2 solenoid crtridge vlve, type W1C size (W-2.12) 3/2 solenoid crtridge vlve, type W1D / W1F size 6 Notes info.ch@ucherhydrulics.com y ucher Hydrulics G Frutigen, CH-3714 Frutigen ll rights reserved. Dt is provided for the purpose of product description only, nd must not e construed s wrrnted chrcteristics in the legl sense. he informtion does not relieve users from the duty of conducting their own evlutions nd tests. ecuse the products re suject to continul improvement, we reserve the right to mend the product specifictions contined in this ctlogue. Clssifiction: (W-2.13) 8/8
2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
More information4/2 and 4/3 Solenoid Directional Valve, ISO Size 03
4/ nd 4/3 Solenoid Directionl Vlve, ISO Size 03 Q mx = 60 l/min, p mx = 315 r wo-stge design, with EX-sfty solenoid coil Vlve: High switching relilility thnks to two-stge follower spool design Slip-on
More informationRPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
More information3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94
3/2 nd 4/2-wy Directionl oppet Vlves with Solenoid Opertion Model M-SED 6, Series X Size 6 000 SI (30 r) 6.6 GM (2 L/min) R 22 049/06.98 R 22 049/06.98 Replces: 02.96 Fetures: Direct operted directionl
More information4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
More informationDirectional Control Valves. General Description. Features. Specifications
echnicl Informtion Generl Description directionl control vlves re high performnce, 5-chmer, direct operted, wet rmture, solenoid controlled, 3 or 4-wy vlves. hey re ville in 2 or 3-position nd conform
More information4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
More informationSolenoid operated spool valve with soft switching NG10 ISO
WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool
More informationDirectional Valve Size 06 WL 4.06
Directionl Vlve Size 06 WL 4.06 Instlltion dimensions ISO 4401/DIN 24340 6 Directionl vlve size 06 instlltion dimensions ISO 4401 / DIN 24340 6 Functionl Description he directionl control vlves WL 4/06
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
More information2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation
0/0 /, / nd / directionl poppet vlve with solenoid ctution.7 Type M-.SEW...LX Size Up to 0 r Up to 0 L/min Contents Function nd configurtion Symols 0 Specifiction 0 Technicl dt 0 Electricl dt 0 Chrcteristic
More informationSolenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
More informationDirectional Valve Size 04 WL 4.04
Directionl Vlve Size 04 WL 4.04 Instlltion dimensions ISO 4401/ DIN 24340 4 Directionl vlve size 04 instlltion dimensions ISO 4401 / DIN 24340 4 Functionl description he directionl control vlves WL 4/04
More informationElectrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
More information2/2, 3/2 and 4/2 directional seat valve with mechanical, manual or fluidic operation
/, / nd / directionl set vlve with mechnicl, mnul or fluidic opertion RE 0/10.06 /1 ype M-.S.. Sizes 6 nd 10 Component series X Mximum operting pressure 0/ r Mximum flow 0 l/min H701+70+70 le of contents
More information4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
More informationElectrically controlled directional control poppet valve type UREZ6
LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion
More informationDirectional Valve. NG 04 WL4.04 Installation dimensions ISO 4401/ DIN A4
Directionl Vlve NG 04 WL4.04 Instlltion dimensions ISO 4401/ DIN 4340 4 Functionl Description he directionl control vlves WL 4/04 consists of housing (1), control spool (5) with two centering springs (4)
More informationSpecial Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4
Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt
More informationp max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60
4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl
More information4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl
More informationRPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
More information3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation
3/3, 4/2 nd 4/3 directionl poppet vlve with solenoid ctution RE 22035/06.10 Replces: 12.08 1/16 Type SEC Size 6 Component series 1X Mximum operting pressure 420 r [6100 psi] Mximum flow 25 l/min [6.6 US
More informationRPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
More informationDSE /116 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 90 l/min
83 2/116 ED DIRECIONL VLVE WIH ROORIONL CONROL SULE MOUNING ISO 41-05 p mx 320 r Q mx l/min MOUNING INERFCE OERING RINCILE ISO 41-05-04-0-05 (CEO 4.2-4-05-320) 21.4 6.3 16.7 3.2 54.8 37.3 27 46 32.5 ø
More informationRPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009
Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009
More informationDS /217 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE SUBPLATE MOUNTING ISO p max 320 bar Q max 150 l/min MOUNTING SURFACE
41 310/217 ED DS5 SOLENOID OERED DIRECIONL CONROL VLVE SULE MOUNING ISO 4401-05 p mx 320 r Q mx 150 l/min MOUNING SURFCE OERING RINCILE ISO 4401-05-04-0-05 (CEO 4.2-4-05-320) 21.4 6.3 16.7 3.2 54 50.8
More information3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
More informationDirectional spool valves, pilot-operated, with hydraulic or electro-hydraulic actuation
Directionl spool vlves, pilot-operted, with hydrulic or electro-hydrulic ctution WEH nd WH RE 24751 Edition: 2016-06 Replces: 08.08 Size 10 32 Component series 4; 6; 7 Mximum operting pressure 350r [5076psi]
More informationProportional directional valves
/4 Proportionl directionl vlves 6.9 Type 4WRE nd 4WREE NG 6 nd p to r p to 8 L/min Contents Function nd configurtion Symols Ordering code Technicl dt 4 Electricl connections, plug-in connectors Integrted
More informationProportional pressure reducing valve type 3WZCDE6 is a
LICION roportionl pressure reducing vlve type 3WZCDE6 3-wy electriclly controlled, proportionl pressure reducing vlve type 3WZCDE6 is used for reducing pressure in hydrulic system, in continuous wy, s
More informationSolenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
More informationProportional directional valve, pilot operated with electrical position feedback and integrated electronics (OBE)
roportionl directionl vlve, pilot operted with electricl position feedck nd integrted electronics (OE) ype 4WRKE Nominl sizes 0 to 35 Component series 3 Mximum operting pressure 350 r Mximum flow 3000
More informationProportional directional valve, pilot operated with electrical position feedback and integrated electronics (OBE)
roportionl directionl vlve, pilot operted with electricl position feedck nd integrted electronics (OE) RE 29075/08.04 Replces: 05.02 /22 ype 4WRKE Nominl sizes 0 to 35 Component series 3 Mximum operting
More informationPress control block PSB Type approved according to DIN EN 693
Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording
More information6/2 way directional valve type 6/2UREM6 and 6/2URMM6
6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS 6 dm 3 up to 35 MP up to 5 /min DT SHEET - SERVICE MNU NUL WK 421 54 11.212 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...
More informationTechnical specification. Model Max.flow rate (l/min) Working pressure (MPa) Single solenoid double solenoids. Weight (kgs) Spool return
WE series solenoid directionl control vlves WE series directionl control vlves re solenoid operted directionl spool vlves, these vlves re used to the strt, stop nd direct oil flow. echnicl specifiction
More informationp max 350 bar Q max 1100 l/min M Maximum flow rate from port P to A - B - T l/min 1100
41 440/107 ED DS10 ILO OERED DISRIUOR SOLENOID OR HYDRULIC (DSC10) CONROLLED SULE MOUNING ISO 4401-10 (CEO 10) p mx 350 r Q mx 1100 l/min MOUNING INERFCE OERING RINCILE ISO 4401-10-08-0-94 (CEO 4.2-4-10-350)
More informationSolenoid Pilot Operated Directional Control Valve
Solenoid ilot Operted Directionl Control Vlve Nomenclture 1 pplicle fluid code No designtion: etroleum-sed hydrulic fluid H: Wter-glycol hydrulic fluid F: hosphte ester hydrulic fluid 2 3 Model No. ME:
More informationDirectional spool valves, pilot-operated, with electro-hydraulic actuation. Type WEH =UR. Features. Contents. RE Edition:
Directionl spool vlves, pilot-operted, with electro-hydrulic ctution ype WEH =UR RE 24802 Edition: 2016-12 Solenoid coil is n pproved component with UR-mrking ccording to UL 906 Size 10 32 Component series
More informationDirectional seat valves, direct operated, with solenoid actuation. Type SEW. Contents. Features. RE Edition: Replaces: 07.
Directionl set vlves, direct operted, with solenoid ctution ype SEW RE 22058 Edition: 2013-06 Replces: 07.09 Size 6 Component series 3X Mximum operting pressure r 9150 psi] Mximum flow 25 l/min [6.6 gpm]
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
OM SOLENOID VLVE HD1N SIZE 025 Fetures HD1 N Series (for 7 M) 1. ompct 2. Dust- nd wter-proof of highest level (I67), thnks to use of M12-4 pin connector 3. Since it opertes t low currency, it cn e connected
More information2 Way Slip-In Cartridge Valves Series CE, CP, C
tlogue H-3500/UK hrcteristics Wy Slip-In rtridge lves Series E,, wy slip-in crtridge vlves re hydruliclly controlled set vlves tht re designed for compct block instlltion. Slip-in crtridge, cover, nd pilot
More informationDirectional spool valves, direct operated, with solenoid actuation. Type WE VP1. Features. Contents. RE VP1 Edition: Replaces:
Directionl spool vlves, direct operted, with solenoid ctution ype WE V1 RE 23178-V1 Edition: 217-6 Replces: 216-6 Size 6 Component series 5X Mximum operting pressure 35 r Mximum flow 7 l/min H813 Fetures
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
LOW-OWE ONSUMTION ILOT-OETED DIETIONL ONTOL VLVE * SIZE 04/0/10 This is n ssemly of solenoid vlve nd directionl control vlve to operte the directionl control vlve (min vlve) y mens of the pilot pressure
More informationApplication Examples of Air-piloted Valves
ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht
More informationIFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08
IF DG8 SOLENOID CONROLLED ILO OERED DIRECIONL VLVE SIZE NG/CEO8 Certifiction CE Certified -119115 1 ISO 91: FEurES : Highest performnce in NG Optimized spool design to reduce flow force roven qulity through
More informationPREFILL AND EXHAUST VALVE PV 100 TO PV 200
PREFILL ND EHUST VLVE Ref. No. Relese 08/2006 1 Description Set type construction. llows free flow from it's port to port. Flow from port to port cn e hd y pplying pilot pressure to it's port. The decompression
More informationEXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 6X NEC STANDARD
EXLOSION ROOF DIRECIONL CONROL VLVE YE ED SERIE X NEC SNDRD CRCERISICS Hydrulic : Cetop. Mximum pressure in service : r. Nominl Flow mx. : 0 l/mn.(see tle) Directionl control vlves re solenoid operted
More informationIFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07
ILO OERED DIRECIONL VLVE SIZE NG-1 / CEO-7 Certifiction CE Certified -119115 1 ISO 91: FEURES : Highest performnce in NG 1 Optimized spool design to reduce flow force roven qulity through 1 million endurnce
More information4/3, 4/2 and 3/2 directional valve with wet-pin DC solenoids
1/12 4/3, 4/2 nd 3/2 directionl vlve with wet-pin DC solenoids RE 23178-XN-B2/04.10 Replces: 05.04 Type WE 6../.E..XN Size 6 Component series 6X Mximum operting pressure 350 r Mximum flow 80 l/min HAD7194
More informationD Power Units in Modular Design Operating pressure 30 to 500 bar, flow rate 0.9 to 12 l/min reservoir sizes 11 l, 27 l, 40 l, 63 l
ower Units in Modulr Design Operting pressure 30 to 500 r, flow rte 0.9 to 12 l/min reservoir sizes 11 l, 27 l, 40 l, 63 l Issue 8-17 E D 8.026 Vlve lock Control circuit _V1 XX X XXX SX_..._V4 oppet/spool
More informationHK CATALOGUE HYDRAULICS 12
HK-- LOGUE HYDRULIS ontents Description ype Size ge heck vlves Modulr check vlves In line check vlves Modulr pilot operted check vlves In line doule cting pilot operted check vlves In line simple cting
More information2/2, 3/2 and 4/2 directional seat valves with solenoid actuation
1/14 /, 3/ nd 4/ directionl set vlves with solenoid ctution RE 058-XE-B/09.13 Replces: 01.10 ype M-.SEW 6...XE... Size 6 Component series 3X Mximum operting pressure 40 r Mximum flow 5 l/min EX units For
More informationDirectional spool valves, direct operated, with solenoid actuation. Type 5-.WE. Features. Contents. RE Edition: Replaces:
Directionl spool vlves, direct operted, with solenoid ctution Type 5-.WE RE 23352 Edition: 2015-09 Replces: 2012-04 5-chmer version Size 10 Component series 5X Mximum operting pressure 420 r [6091 psi]
More information2/2 Logic Cartridge Valve, Size 10
2/2 Logic Cartridge Valve, Size 10 Q max = 10 l/min, p max = 420 bar ctive Control, Seated Design ctive control rea ratio 2 : 1 High flow rates with low p Seat-valve shut-off from and No pilot oil consumption
More information3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = 4 l/min ( gpm), p max = 5 bar (45 psi) Bidirectional seat-valve shut-off, direct acting Series W.B, WF.B Guided valve spool and poppet Two spool variants are
More informationPILOT OPERATED PRESSURE RELIEF VALVE SERIES - IN-LINE MOUNTING
CONTINENTL HYDRULICS PR*W - PR*WU PILOT OPERTED PRESSURE RELIEF VLVE SERIES - IN-LINE MOUNTING 5505 WEST 123RD STREET SVGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTLHYDRULICS.COM PRECISE PR*W -
More informationNT Series SSS MARK-II
efore using the product, plese check the For ltest informtion, DF ctlogs nd opertion mnuls Series SSS MRK-II se unit Unit with ll options Fetures Extensive vritions wide rnge of functions nd other options
More information11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
More informationBrazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
More informationBlocked for new applications / Für Neuanwendung gesperrt
locked for new pplictions / Für Neunwendung gesperrt RE 29 075/05.02 Replces: 02.0 roportionl directionl vlve, pilot operted with electricl position feedbck ype 4WRKE Nominl sizes 0 to 35 Series 3 Mximum
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
SOLENOID VALVEHD*-WY* SIZE Fetures HD3 Series (for MP) HD Series (for MP). ompct. Directly controllle y. High pressure nd lrge cpcity progrmmle controller 3. Incresed rted flow rte since the vlve opertes
More informationDC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor
Huell Industril Controls, Inc. 716 1600 Ampere 1500 Volt DC Contctor Ctlog 42716 Mrch 2013, Replces Septemer 2005 42716 Highlights Non-polrized rc chute (series lowout coil) design s stndrd Optionl polrized
More informationNT Series SSS MARK-II
efore using the product, plese check the For ltest informtion, DF ctlogs nd opertion mnuls N Series SSS MRK-II se unit Unit with ll options Fetures Extensive vritions wide rnge of functions nd other options
More informationFINGER STRIPS. and other EMI shielding products. Characteristics
BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used
More informationGeneral Information. Up to 31.5 MPa (4570 PSI), 1100L/min (291 U.S.GPM)
SOLNOID CONROLLD ILO ORD VLVS DSHG-//// ILO ORD VLVS DHG/// MNULL ORD VLVS DMG-//// DM-// Generl Informtion Up to. M (7 SI), L/min (9 U.S.GM) u. C- Solenoid contorolled ilot Operted Vlves... ge hese vlves
More informationProportional Flow-Control Cartridges, Size 5
Proportional Flow-Control Cartridges, Size Q max = l/min, p max = bar, Q N = l/min at p bar Leak free, load compensated, two stage Description Series MVRPLSA two-stage proportional flow-control cartridges
More information2/2 Solenoid Cartridge Valve, Size 10
2/2 Solenoid Cartridge Valve, Size 1 Q max = 8 l/min, p max = 3 bar Seat-valve shut-off, two-stage, monitored operating position 1 Description With integral electronic monitoring of operating position
More informationInstallation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)
Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More informationDIRECTIONAL CONTROLS
DIRCIONL CONROLS Solenoid Operted Directionl Vlves...ge Solenoid Controlled ilot Operted Directionl Vlves...ge Series Shockless ype Directionl Vlves...ge ilot/mnully/mechniclly Operted Directionl Vlves...ge
More informationSchematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)
Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if
More informationproduct range leading valve technology TM
1 product rnge leding vlve technology TM 01 y müller cox g ll technicl informtion is up to dte t the time of going to press. We reserve the right to mke technicl chnges. Unfortuntely, we cnnot exclude
More informationDirectional spool valves type WEH32. electro-hydraulically operated
Directionl spool vlve type WEH2 electro-hydruliclly operted NS2 up to 5 M up to 11 D SHEE - SERVICE MNU NUL dm /min WK 46 58 2.212 LICION Directionl spool vlves type WEH2 2 electrohydruliclly operted re
More information2/2 Logic Cartridge Valve, Size 10
2/2 Logic Cartridge Valve, Size 10 Q max = 10 l/min, p max = 420 bar ctive Control, Seated Design, Soft Switching 1 Description ctive control Soft switching, or soft switching + snap action Seated valve
More informationSolenoid controlled pilot operated directional control valves DG5S-10
Solenoid controlled pilot operted directionl control vlves DGS- - Model Code ( F )- D G S - - A( L )-( )( )-( T )- P - T - - JA - M 7 Hydrulic fluid Omit: minerl oil sed fluid, wter-glycol sed fluid F:
More information152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:
2mm ") DI. POINT TO POINT SYSTEM PVC OR STEEL SYSTEM L84 CLL -800--600 TYPE I ND TYPE II OVERHED UNITS 4 6 ") ( 8 ") 6 8 ") ( -0 PLN VIEW 20 (8 28 8 ") ( 8 ") 4 ( -4") 2 (4 ( 8 ") 28 ( 8 ") THE TYPE I
More information2/2 Cartridge Seat Valve, Size 5
/ Cartridge Seat Valve, Size Q max = l/min, p max = bar Digital valve, bidirectional seat-valve shut-off, direct acting Series WSGD / WSOD For use in digital hydraulics With bidirectional seat-valve shut-off
More information631 ALLOWANES AND TOLERANCES
631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce
More informationDCV MONOBLOCK AND MODULAR VALVES. Technical Catalogue
CV MONOLOCK N MOLR VLVES echnicl Ctlogue July 216 i echnicl informtion INROCION Red this instructions crefully efore instlltion. ll opertions must e crried out y qulified personnel following the instructions.
More informationFUEL SYSTEM. Table of Contents. Section 3B - Carburetors
Tle of Contents FUEL SYSTEM Section 3B - Cruretors CARBURETORS Fuel System - Trouleshooting.............. 3B-2 Generl Informtion.................... 3B-2 Attenutor And Cr Throttle Levers......... 3B-4
More informationMPC COBRA SERIES. Manually Programmable Cylindrical Lock D
51120-D MPC COBRA SERIES Mnully Progrmmle Cylindricl Lock 575 Birch Street Forestville, CT 06010 technicl support: 866-322-1237 fx: 866-322-1233 http://www.irsupport.net 57010-H 12-19-2005 Introduction
More information1 SGI 500XT INVERTER TRANSFORMER WITH OUTDOOR ENCLOSURE CONDUIT, FITTINGS AND CONDUCTORS AS REQUIRED
1. THIS DOCUMENT IS INTENDED TO ILLUSTRTE THE PPLICTION OF 600VC TRNSFORMER WITH OUTDOOR ENCLOSURE WITH SOLECTRI RENEWLES SGI 500XT INVERTER. EXMPLES OF THE FOLLOWING RE GIVEN: - INVERTER TO TRNSFORMER
More informationSpecifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits
PowerMte Fetures nd Benefits Type P Cle Lockout Complint Specifile Fetures Lockout Plug Sfety Insultor Dimond Clmp Split Pin Contcts Type P Cle Comptile with ll UL 686 listed plugs nd receptcles. 2 3 4
More informationY03002/ Prefill Exhaust Valve. Description
Prefill Exhust Vlve 350 r /6 Description The Prefill Exhust Vlve (PV) is hydrulic-pilot operted check vlve with set type construction. It llows free flow from port A to port B. Flow from port B to port
More informationHEATING BLANKETS FOR GENERAL COMPOSITE REPAIR
Innovtion in Technology for Aircrft Mintennce Equipment, Airline Support through Engineering & Trining Advnced Composite & Metllic Structures Cge Code - NATO Code : F7856 - Eur VAT- ID: FR90 328961073
More informationEx-proof proportional valves multicertification ATEX, IECEx, EAC
Tble F600-5/E Ex-proof proportionl vlves multicertifiction ATEX, IECEx, EAC DLHZA-T-040 vlve body ex-proof solenoid ex-proof trnsducer (only for proportionl -T vlves) threded connections for cble clmp
More informationVB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
More informationPrecision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.
Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description
More informationAppendix E D791 and T791 Head and Valve Holddown Assembly Details
Appendix E D nd T Hed nd Vlve Holddown Assemly Detils Hed First Stge Holddown Assemly (") Suction with Unloder Suction (Stndrd) First Stge Holddown Assemly (") Dischrge See figure A 0 CAUTION: Alwys relieve
More informationPOWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24
POWERHEAD Section 4A - Cylinder Hed CYLINDER HEAD Tle of Contents Specifictions........................... 4A-2 Specil Tools........................... 4A-4 Cylinder Hed.......................... 4A-6
More informationPneumatic. PVL Inline Valves. Catalogue No.
Pneumtic PVL Inline Vlves Ctlogue No. GB-c PVL High flow, compct size Push-in threded connection DIN ril block mounting Light weight construction Inline stnd lone stckble version Avilble in 2 x 3/2-5/3
More information2/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min (.3 gpm), p max = 3 bar (4 psi) Bidirectional leak-proof shutoff, direct acting, with EX-safty solenoid coil Description Valve: Bidirectional leak-proof
More informationMechanical Fail-Safe Damper Actuator NFA
2-FON echnicl Fil-Sfe Dmper Actutor NFA ctutor emergency function for djusting ir dmpers in ventiltion nd ir conditioning systems in uildings orque Nm Nominl voltge AC 24..4V / DC 24..V Control: Open-close
More informationSpring Return DuraDrive Two-Position Actuator
MA40-704x Series, MA4-707x Series, nd MA4-75x Series Spring Return DurDrive Two-Position Actutor For spring return pplictions tht require twoposition control of dmpers nd vlves in HVAC system. Fetures:
More information