EXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 6X NEC STANDARD
|
|
|
- Beverly Booth
- 5 years ago
- Views:
Transcription
1 EXLOSION ROOF DIRECIONL CONROL VLVE YE ED SERIE X NEC SNDRD CRCERISICS Hydrulic : Cetop. Mximum pressure in service : r. Nominl Flow mx. : 0 l/mn.(see tle) Directionl control vlves re solenoid operted directionl spool vlves. Electric : rotection Index: I. Directive NEC 00 or NEC 0 (tch certifiction y certified uthority) rotection mode : Clss I div group C & D Clss I div group C et D Clss I Zone Exd II+H ED E X/US700 -DC- HD DESCRIION OF FONCION Directionl control vlves type ED re solenoid operted directionl spool vlves. hey control strt, stop nd direction of n oil flow. hese vlves siclly consist of the housing (), one or two solenoids (), the control spool (), nd return springs (). In unoperted condition the control spool () is held in the neutrl or strting position y the return springs () (except for type O nd OF). he opertion of the control spool is y mens of oil immersed solenoids (). he force of the solenoid () cts vi the plunger () on the control spool () nd pushes it from its rest position into the required end position. When the solenoid is de-energised (), the control spool () is returned to its originl y the return springs (). n hnd emergency utton, llows movement of the control spool () without solenoid energistion. YE : ED _ X/ O Only for symoles, C et D these re directionl vlves with switching positions nd solenoids without locking. When the solenoid is energised there is no medin position (without return springs). YE : ED _ X/ OF Only for symoles, C et D these re directionl vlves with switching positions nd solenoids without locking. When the solenoid is energised there is no medin position (with return springs). Crdridge hrottle : ED _ X/ xx Use of the crdridge throttle is necessry when, ecuse of the given operting conditions, flow lrger thn tht llowed y the vlve operting limits rise during spool cross-over. NO/E 0-/08- () ZE CNORD - Rue NOURISS - 70 F-07 DIJON Cedex él : Fx : E-mil: ce.dijon@cefrnce.com --
2 GENERLIY OF FONCION It is in n oil th nd cn e powered y direct current. Its mechnicl impct resistnce meets the stndrds for explosion-proof equipment. olymerized it cn operte in tropicl climtes. he plunger operte in oil to reduce friction, dissipte hed nd cushions nd drives control spool. Direct curent solenoid hs the dvntges of : - slow movement of the control spool. - energized mintennce of the control vlve in intermediry position, is not detrimentl to the solenoid. -Insensitivity to undervoltge nd even rief overvoltge, overlod or mechnicl stop. ELECRIC CONNEXION For Clss I Zone Junction in ox he terminl ox () cn e oriented in steps of 80 on the solenoid housing (). he electricl connector on the outlet terminl ox () cn e rrnged horizontlly (on terminl ox )suitle for cle glnd. One erth connection () is ville inside or outside the terminl ox. Model H, H,... (ox) Horizontl connection. rotection On terminl strip () inside the explosion proof terminl () ox suitle for 0. to. mm² (WG0 to WG) he terminl ox is produced in luminium s stndrd, ut production in SEEL possile on request. -- ZE CNORD - Rue NOURISS - 70 F-07 DIJON Cedex él : Fx : E-mil: ce.dijon@cefrnce.com
3 ELECRIC CONNEXION For Clss I div nd div Junction On Femle ped Flnge Connection with threded rigid conduit pproved in group II only. Sel integrted in the housing. It is produced ccording to the "d" protection mode using certified type of rigid conduit (threded tue). Sel integrted in the housing. Erth connexion (). he led wire length normlly supplied is. meter. ctive led wires (7). Erth led wire (8). Other lengths to order. ville with either horizontl (H) or verticl (I) electricl output. Model "I" (Flnge) 7 Model "H" (Flnge) ZE CNORD - Rue NOURISS - 70 F-07 DIJON Cedex él : Fx : E-mil: ce.dijon@cefrnce.com --
4 HYDRULIC CODE ED X service ports service ports D Y OF O D D Middle position Norml position E J G Hydrulic housing series numer. X he ove refer to symols D, Y only. Without return spring, with locking control spool. Without return spring. With return springs : No code OF O he ove refer to E, J, G,... Ect. With one solenoid side. With one solenoid side. With one solenoid side nd side.: No code For use when the flow is greter thn the vlve cpcity, fitted in line. hrottle Ø 0.8 MM : hrottle Ø,0 MM : hrottle Ø, MM : Without throttle : No code 08 0 hydrulic piloted outside side hydrulic piloted inside side hydrulic piloted outside side hydrulic piloted inside side hydrulic piloted outside side nd hydrulic piloted inside side nd Without hydrulic piloted : No code HE-X HI-X HE-X HI-X HE-X HI-X -- ZE CNORD - Rue NOURISS - 70 F-07 DIJON Cedex él : Fx : E-mil: ce.dijon@cefrnce.com
5 ELECRIC CODE US No code : Wires length. meter Wires length meters (only for tped flnge) * S No Code * S X-0 X-0 Stndrd temp +0 C emp. Declss +0 C emp. decls +0 C See tle pge luminium ox (Stndrd) Steel ox D With ox. No code. : tped flnge : /" N : M 0 x.0 H I H Horizontl connection on the ox. Only Clss Zone For tped flnge,wire lg.m (Verticl). Only Only For tped flnge,wire lg.m (Horizontl). Clss Div& C V Control pushutton unch operting with locking position Screw Control No code : Without control pushutton Side of Vlve. C V Control pushutton unch operting with locking position Screw Control No code : Without control pushutton Side of Vlve.... emperture rnge see tle on pge DC Solenoid energized in direct current. Solenoid power supply in Volt.,,, 8,... See tle on pge for correspondnce with the temperture rnge,,. US700 Explosion proof protection (tch certifiction y certified uthority) ZE CNORD - Rue NOURISS - 70 F-07 DIJON Cedex él : Fx : E-mil: ce.dijon@cefrnce.com --
6 CRCERISICS GENERLIY Mounthing position Weight HYDRULIC ressure drop Hydrulic fluid Fluid temperture rnge Viscosity rnge Degree of pollution - vlve with solenoid (kg) - vlve with solenoids (kg) Mximum operting pressure : orts,,. r C mm /s Optionl - Horizontl prefered.7 kg. kg Up to... r r Up to...00 r With spool type nd, port must e used s drin port, if the operting pressure lies ove 00 r. see operting curves of pressure drop Minerl oils -0 C C, Clss 9 under NS 8 ELECRIC Continous voltges ville V/DC 8 emperture rnge with miente 0 C emperture rnge with miente 0 C emperture rnge with miente 0 C ower requirement V rotection index Duty cycle Mximum coil temperture Outlet connection on terminl ox or tped flnge. I 00% 0 C...7. / N-M0x. clssifiction code Clss I div & div group C & D or Clss I Zone tch certifiction y certified uthority -- ZE CNORD - Rue NOURISS - 70 F-07 DIJON Cedex él : Fx : E-mil: ce.dijon@cefrnce.com
7 HYDRULIC VRIION SYMOLS 0 0 = /O =. = /OF =. = = E ) = E- = C = F = D = G = 9 = H = J = L = = M = Y = = Q = R = = U = V = W ZE CNORD - Rue NOURISS - 70 F-07 DIJON Cedex él : Fx : E-mil: ce.dijon@cefrnce.com -7-
8 HYDRULIC VLVE CONNECION HYDRULIC VLVE CONNECION CEO HYDRULIC VLVE CONNECION CEO WIH HYDRULIC COMMND 0,0 7,80 9 0,0 x M x Ø 0,0 7,80 9 0,0 x M,,,0 HI HI,,,0 0,7 x Ø.0,9 0,7 x Ø.0,9 CURVES OF RESSURE DRO CURVE 7 : SYMOL "R" IN SWICHING OSIION : - CURVE 8 : SYMOL "G" IN NEUL OSIION : - RESSURE DRO ( r) FLOW Q( L/mn) Mesured t V : mm ² /S, t : 0 C SYMOL C D E F G H J L M Q R U V W Y -> 0 FLOW DIRECION -> 0 -> > ZE CNORD - Rue NOURISS - 70 F-07 DIJON Cedex él : Fx : E-mil: ce.dijon@cefrnce.com
9 DIMENSIONS (In MM) CONNECION WIH OX ND ERMINL LOCK positions , 77,, 8, 9, 8, 9, 0, 9,8, 0, 0,,8 positions, 9, 8, : ex d type connection ox : Solenoid housing side : Solenoid housing side : Without pushutton housing : Control pushutton : Hydrulic housing 7 : fixing screws M x 0 DIN 9-0.9, to e ordered seprtely 8 : rectngulr sels 9,8 x, x,78 MNUL YE WIHOU SOLENOID 7 ZE CNORD - Rue NOURISS - 70 F-07 DIJON Cedex él : Fx : E-mil: ce.dijon@cefrnce.com -9-
10 DIMENSIONS (In MM) CONNECION WIH H YE HREDED FLNGE positions 8 8 Wire lg 00 mm 97, 77,, 0, positions sns Commnde Mnuelle 9,8, 0, CONNECION WIH I YE HREDED FLNGE, : Horizontl type connection flnge : Solenoid housing side : Solenoid housing side : Without pushutton housing : Control pushutton : Hydrulic housing 7 : fixing screws M x 0 DIN 9-0.9, to e ordered seprtely 8 : rectngulr sels 9,8 x, x,78 80,,8 8 : Verticl type connection flnge : Solenoid housing side : Solenoid housing side : Without pushutton housing : Control pushutton : Hydrulic housing 7 : fixing screws M x 0 DIN 9-0.9, to e ordered seprtely 8 : rectngulr sels 9,8 x, x,78-0- ZE CNORD - Rue NOURISS - 70 F-07 DIJON Cedex él : Fx : E-mil: ce.dijon@cefrnce.com
11 DIMENSIONS (In MM) unch operting with locking position. 9. SOLENOID WIH HYDRULIC OEROR INSIDE ND OUSIDE, , 00,, /"G HYDRULIC ILOED OUSIDE SIDE 0,0 /"G HYDRULIC ILOED OUSIDE SIDE,80 7,0 ZE CNORD - Rue NOURISS - 70 F-07 DIJON Cedex él : Fx : E-mil: ce.dijon@cefrnce.com --
12 SCREW CONROL 7,0 ONE HLF URN O CIVED HE SOLENOID 0, 00, -- ZE CNORD - Rue NOURISS - 70 F-07 DIJON Cedex él : Fx : E-mil: ce.dijon@cefrnce.com
Electrically controlled directional control poppet valve type UREZ6
LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion
EXPLOSION PROOF CHECK VALVE TYPE SEW6 SERIE 3X ATEX DIRECTIVE & CENELEC STANDARD
EXLOSION ROOF CHECK VALVE YE SEW SERIE X AEX DIRECIVE & CENELEC SANDARD NO/E 0-0/-0 CARACERISICS Hydraulic : Cetop. Maximum service pressure : 50 Bar. Nominal flow max. : l/mn. hydraulic symbols : / et
Solenoid operated spool valve with soft switching NG10 ISO
WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool
Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
p max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60
4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl
p max 350 bar Q max 1100 l/min M Maximum flow rate from port P to A - B - T l/min 1100
41 440/107 ED DS10 ILO OERED DISRIUOR SOLENOID OR HYDRULIC (DSC10) CONROLLED SULE MOUNING ISO 4401-10 (CEO 10) p mx 350 r Q mx 1100 l/min MOUNING INERFCE OERING RINCILE ISO 4401-10-08-0-94 (CEO 4.2-4-10-350)
4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl
4/2 and 4/3 Solenoid Directional Valve, ISO Size 03
4/ nd 4/3 Solenoid Directionl Vlve, ISO Size 03 Q mx = 60 l/min, p mx = 315 r wo-stge design, with EX-sfty solenoid coil Vlve: High switching relilility thnks to two-stge follower spool design Slip-on
4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
DS /217 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE SUBPLATE MOUNTING ISO p max 320 bar Q max 150 l/min MOUNTING SURFACE
41 310/217 ED DS5 SOLENOID OERED DIRECIONL CONROL VLVE SULE MOUNING ISO 4401-05 p mx 320 r Q mx 150 l/min MOUNING SURFCE OERING RINCILE ISO 4401-05-04-0-05 (CEO 4.2-4-05-320) 21.4 6.3 16.7 3.2 54 50.8
SOLENOID VALVES / DIRECTIONAL CONTROL VALVES
OM SOLENOID VLVE HD1N SIZE 025 Fetures HD1 N Series (for 7 M) 1. ompct 2. Dust- nd wter-proof of highest level (I67), thnks to use of M12-4 pin connector 3. Since it opertes t low currency, it cn e connected
Proportional pressure reducing valve type 3WZCDE6 is a
LICION roportionl pressure reducing vlve type 3WZCDE6 3-wy electriclly controlled, proportionl pressure reducing vlve type 3WZCDE6 is used for reducing pressure in hydrulic system, in continuous wy, s
4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
EXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 5X CENELEC STANDARD & ATEX DIRECTIVE
EXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 5X CENELEC STANDARD & ATEX DIRECTIVE NOT/E 10-60/11-0 CARACTERISTICS Hydraulic : Cetop 3. Maximum pressure in service : 315 ar. Nominal flow. :
2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
Directional Valve Size 06 WL 4.06
Directionl Vlve Size 06 WL 4.06 Instlltion dimensions ISO 4401/DIN 24340 6 Directionl vlve size 06 instlltion dimensions ISO 4401 / DIN 24340 6 Functionl Description he directionl control vlves WL 4/06
2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation
0/0 /, / nd / directionl poppet vlve with solenoid ctution.7 Type M-.SEW...LX Size Up to 0 r Up to 0 L/min Contents Function nd configurtion Symols 0 Specifiction 0 Technicl dt 0 Electricl dt 0 Chrcteristic
RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
IFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08
IF DG8 SOLENOID CONROLLED ILO OERED DIRECIONL VLVE SIZE NG/CEO8 Certifiction CE Certified -119115 1 ISO 91: FEurES : Highest performnce in NG Optimized spool design to reduce flow force roven qulity through
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
EXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 5X USA NEC STANDARD
EXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 5X USA NEC STANDARD R NOT/E 10-0/05-08 CARACTERISTICS Hydraulic : Cetop. Maximum pressure in service : 15 Bar. Nominal flow. : 60 l/mn. 7 hydraulic
RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009
Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009
DSE /116 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 90 l/min
83 2/116 ED DIRECIONL VLVE WIH ROORIONL CONROL SULE MOUNING ISO 41-05 p mx 320 r Q mx l/min MOUNING INERFCE OERING RINCILE ISO 41-05-04-0-05 (CEO 4.2-4-05-320) 21.4 6.3 16.7 3.2 54.8 37.3 27 46 32.5 ø
6/2 way directional valve type 6/2UREM6 and 6/2URMM6
6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS 6 dm 3 up to 35 MP up to 5 /min DT SHEET - SERVICE MNU NUL WK 421 54 11.212 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...
Directional Valve Size 04 WL 4.04
Directionl Vlve Size 04 WL 4.04 Instlltion dimensions ISO 4401/ DIN 24340 4 Directionl vlve size 04 instlltion dimensions ISO 4401 / DIN 24340 4 Functionl description he directionl control vlves WL 4/04
3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94
3/2 nd 4/2-wy Directionl oppet Vlves with Solenoid Opertion Model M-SED 6, Series X Size 6 000 SI (30 r) 6.6 GM (2 L/min) R 22 049/06.98 R 22 049/06.98 Replces: 02.96 Fetures: Direct operted directionl
Solenoid Pilot Operated Directional Control Valve
Solenoid ilot Operted Directionl Control Vlve Nomenclture 1 pplicle fluid code No designtion: etroleum-sed hydrulic fluid H: Wter-glycol hydrulic fluid F: hosphte ester hydrulic fluid 2 3 Model No. ME:
2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4
Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt
Proportional directional valves
/4 Proportionl directionl vlves 6.9 Type 4WRE nd 4WREE NG 6 nd p to r p to 8 L/min Contents Function nd configurtion Symols Ordering code Technicl dt 4 Electricl connections, plug-in connectors Integrted
Directional Valve. NG 04 WL4.04 Installation dimensions ISO 4401/ DIN A4
Directionl Vlve NG 04 WL4.04 Instlltion dimensions ISO 4401/ DIN 4340 4 Functionl Description he directionl control vlves WL 4/04 consists of housing (1), control spool (5) with two centering springs (4)
RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
Solenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
IFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07
ILO OERED DIRECIONL VLVE SIZE NG-1 / CEO-7 Certifiction CE Certified -119115 1 ISO 91: FEURES : Highest performnce in NG 1 Optimized spool design to reduce flow force roven qulity through 1 million endurnce
Directional spool valves, pilot-operated, with hydraulic or electro-hydraulic actuation
Directionl spool vlves, pilot-operted, with hydrulic or electro-hydrulic ctution WEH nd WH RE 24751 Edition: 2016-06 Replces: 08.08 Size 10 32 Component series 4; 6; 7 Mximum operting pressure 350r [5076psi]
Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
2/2, 3/2 and 4/2 directional seat valve with mechanical, manual or fluidic operation
/, / nd / directionl set vlve with mechnicl, mnul or fluidic opertion RE 0/10.06 /1 ype M-.S.. Sizes 6 nd 10 Component series X Mximum operting pressure 0/ r Mximum flow 0 l/min H701+70+70 le of contents
2/2, 3/2 and 4/2 directional seat valves with solenoid actuation
1/14 /, 3/ nd 4/ directionl set vlves with solenoid ctution RE 058-XE-B/09.13 Replces: 01.10 ype M-.SEW 6...XE... Size 6 Component series 3X Mximum operting pressure 40 r Mximum flow 5 l/min EX units For
Technical specification. Model Max.flow rate (l/min) Working pressure (MPa) Single solenoid double solenoids. Weight (kgs) Spool return
WE series solenoid directionl control vlves WE series directionl control vlves re solenoid operted directionl spool vlves, these vlves re used to the strt, stop nd direct oil flow. echnicl specifiction
Directional spool valves, direct operated, with solenoid actuation. Type WE VP1. Features. Contents. RE VP1 Edition: Replaces:
Directionl spool vlves, direct operted, with solenoid ctution ype WE V1 RE 23178-V1 Edition: 217-6 Replces: 216-6 Size 6 Component series 5X Mximum operting pressure 35 r Mximum flow 7 l/min H813 Fetures
p max (see table of performances) Q max (see table of performances) MD1K MD1KD bar
41 510/107 ED EXLOSION-ROOF VERSION SOLENOID OERED DIRECIONL CONROL VLVES in compliance with EX 94/9/CE SERIES 21 MD1K-MD1KD ISO 4401-03 (CEO 03) E44K-E44KD CEO 05 E074K-E074KD ISO 4401-07 (CEO 07) E54K-
3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation
3/3, 4/2 nd 4/3 directionl poppet vlve with solenoid ctution RE 22035/06.10 Replces: 12.08 1/16 Type SEC Size 6 Component series 1X Mximum operting pressure 420 r [6100 psi] Mximum flow 25 l/min [6.6 US
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D0H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol Drive
HK CATALOGUE HYDRAULICS 12
HK-- LOGUE HYDRULIS ontents Description ype Size ge heck vlves Modulr check vlves In line check vlves Modulr pilot operted check vlves In line doule cting pilot operted check vlves In line simple cting
Directional spool valves type WEH32. electro-hydraulically operated
Directionl spool vlve type WEH2 electro-hydruliclly operted NS2 up to 5 M up to 11 D SHEE - SERVICE MNU NUL dm /min WK 46 58 2.212 LICION Directionl spool vlves type WEH2 2 electrohydruliclly operted re
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
NT Series SSS MARK-II
efore using the product, plese check the For ltest informtion, DF ctlogs nd opertion mnuls Series SSS MRK-II se unit Unit with ll options Fetures Extensive vritions wide rnge of functions nd other options
NT Series SSS MARK-II
efore using the product, plese check the For ltest informtion, DF ctlogs nd opertion mnuls N Series SSS MRK-II se unit Unit with ll options Fetures Extensive vritions wide rnge of functions nd other options
Directional spool valves, pilot-operated, with electro-hydraulic actuation. Type WEH =UR. Features. Contents. RE Edition:
Directionl spool vlves, pilot-operted, with electro-hydrulic ctution ype WEH =UR RE 24802 Edition: 2016-12 Solenoid coil is n pproved component with UR-mrking ccording to UL 906 Size 10 32 Component series
Directional Control Valves. General Description. Features. Specifications
echnicl Informtion Generl Description directionl control vlves re high performnce, 5-chmer, direct operted, wet rmture, solenoid controlled, 3 or 4-wy vlves. hey re ville in 2 or 3-position nd conform
SOLENOID VALVES / DIRECTIONAL CONTROL VALVES
LOW-OWE ONSUMTION ILOT-OETED DIETIONL ONTOL VLVE * SIZE 04/0/10 This is n ssemly of solenoid vlve nd directionl control vlve to operte the directionl control vlve (min vlve) y mens of the pilot pressure
Directional seat valves, direct operated, with solenoid actuation. Type SEW. Contents. Features. RE Edition: Replaces: 07.
Directionl set vlves, direct operted, with solenoid ctution ype SEW RE 22058 Edition: 2013-06 Replces: 07.09 Size 6 Component series 3X Mximum operting pressure r 9150 psi] Mximum flow 25 l/min [6.6 gpm]
Ex-proof proportional valves multicertification ATEX, IECEx, EAC
Tble F600-5/E Ex-proof proportionl vlves multicertifiction ATEX, IECEx, EAC DLHZA-T-040 vlve body ex-proof solenoid ex-proof trnsducer (only for proportionl -T vlves) threded connections for cble clmp
High Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple
Directional spool valves type WEH16 electrohydraulically
Directionl spool vlve type WEH6 electro-hydruliclly operted NS6 up to 5 M up to D SHEE - SERVICE MNU NUL dm /min WK 99 8. LICION Directionl spool vlves type WEH6 electrohydruliclly operted re intended
Proportional directional valve, pilot operated with electrical position feedback and integrated electronics (OBE)
roportionl directionl vlve, pilot operted with electricl position feedck nd integrted electronics (OE) ype 4WRKE Nominl sizes 0 to 35 Component series 3 Mximum operting pressure 350 r Mximum flow 3000
Proportional directional valve, pilot operated with electrical position feedback and integrated electronics (OBE)
roportionl directionl vlve, pilot operted with electricl position feedck nd integrted electronics (OE) RE 29075/08.04 Replces: 05.02 /22 ype 4WRKE Nominl sizes 0 to 35 Component series 3 Mximum operting
PREFILL AND EXHAUST VALVE PV 100 TO PV 200
PREFILL ND EHUST VLVE Ref. No. Relese 08/2006 1 Description Set type construction. llows free flow from it's port to port. Flow from port to port cn e hd y pplying pilot pressure to it's port. The decompression
Press control block PSB Type approved according to DIN EN 693
Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording
Directional spool valves, direct operated, with solenoid actuation. Type 5-.WE. Features. Contents. RE Edition: Replaces:
Directionl spool vlves, direct operted, with solenoid ctution Type 5-.WE RE 23352 Edition: 2015-09 Replces: 2012-04 5-chmer version Size 10 Component series 5X Mximum operting pressure 420 r [6091 psi]
Y03002/ Prefill Exhaust Valve. Description
Prefill Exhust Vlve 350 r /6 Description The Prefill Exhust Vlve (PV) is hydrulic-pilot operted check vlve with set type construction. It llows free flow from port A to port B. Flow from port B to port
PILOT OPERATED PRESSURE RELIEF VALVE SERIES - IN-LINE MOUNTING
CONTINENTL HYDRULICS PR*W - PR*WU PILOT OPERTED PRESSURE RELIEF VLVE SERIES - IN-LINE MOUNTING 5505 WEST 123RD STREET SVGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTLHYDRULICS.COM PRECISE PR*W -
High Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H03 5 gpm (19 L/min) nominal 10 000 psi (700 bar) H03 valves are rated for 5 gpm (19 L/min) nominal flow at pressures
4/3, 4/2 and 3/2 directional valve with wet-pin DC solenoids
1/12 4/3, 4/2 nd 3/2 directionl vlve with wet-pin DC solenoids RE 23178-XN-B2/04.10 Replces: 05.04 Type WE 6../.E..XN Size 6 Component series 6X Mximum operting pressure 350 r Mximum flow 80 l/min HAD7194
Blocked for new applications / Für Neuanwendung gesperrt
locked for new pplictions / Für Neunwendung gesperrt RE 29 075/05.02 Replces: 02.0 roportionl directionl vlve, pilot operted with electricl position feedbck ype 4WRKE Nominl sizes 0 to 35 Series 3 Mximum
Directional control valves NG6...NG32 D03...D10 6
Directional control valves NG6...NG32 D03...D10 6 DIRECIONL CONROL VLVES 1 Index DO3 (NG6) age 2 to 22 D05 (NG10) age 23 to 42 D07 (NG16) age 43 to 54 D08 (NG25) 3000 SI age 55 to 65 D08 (NG25) 4600 SI
DIRECTIONAL CONTROLS
DIRCIONL CONROLS Solenoid Operted Directionl Vlves...ge Solenoid Controlled ilot Operted Directionl Vlves...ge Series Shockless ype Directionl Vlves...ge ilot/mnully/mechniclly Operted Directionl Vlves...ge
SOLENOID VALVES / DIRECTIONAL CONTROL VALVES
SOLENOID VALVEHD*-WY* SIZE Fetures HD3 Series (for MP) HD Series (for MP). ompct. Directly controllle y. High pressure nd lrge cpcity progrmmle controller 3. Incresed rted flow rte since the vlve opertes
SINEAX C 402 Alarm unit
for DC currents or DC voltges 00 II () G Appliction The lrm unit SINEAX C40 (Figure ) is normlly pplied to monitor the limits of oth current nd voltge mesurements. The sttus of the device is signlled remotely
PROPORTIONAL DIRECTIONAL CONTROL VALVES PILOT OPERATED WITHOUT LVDT TYPICAL PERFORMANCE SPECIFICATIONS W/O LVDT, OPEN INNER LOOP MOUNTING SURFACE
ED8M PILOT OPERTED WITHOUT TYPICL PERFORMNCE SPECIFICTIONS W/O, OPEN INNER LOOP MOUNTING SURFCE NFP/T3.5.1M R1-1984 D8 (Formely D6) NSI/B93.7M-1986 ISO SIZE 8 These proportional directional control valves
D Power Units in Modular Design Operating pressure 30 to 500 bar, flow rate 0.9 to 12 l/min reservoir sizes 11 l, 27 l, 40 l, 63 l
ower Units in Modulr Design Operting pressure 30 to 500 r, flow rte 0.9 to 12 l/min reservoir sizes 11 l, 27 l, 40 l, 63 l Issue 8-17 E D 8.026 Vlve lock Control circuit _V1 XX X XXX SX_..._V4 oppet/spool
MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts
MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions
2 Way Slip-In Cartridge Valves Series CE, CP, C
tlogue H-3500/UK hrcteristics Wy Slip-In rtridge lves Series E,, wy slip-in crtridge vlves re hydruliclly controlled set vlves tht re designed for compct block instlltion. Slip-in crtridge, cover, nd pilot
DHAXW4-07*/M DHOXW-06* Input Power. 32 W (only for 12 and 24 DC) 40 W (only for 110 and 220 DC) 8 W 25 W T6 T4 8 W 25 W T4 T3 T6 T4 T4 T3 25 W 8 W
www.atos.com Table TE137obs/E Stainless steel valves for water base fluids standard or ex-proof solenoid valves with Multicertification TEX, IECEx, EC or CULUS certification UL certified valves are obsolete
DXPE*J /117 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 31
85 320/117 ED DXPE*J DIRECtIONL CONtROL VLVE PILOt OPERtED, WItH OE ND FEEDCK SUPLtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 DXPE7J ISO 4401-07 DXPE8J ISO 4401-08 p max (see performance table) Q
Incremental encoders Solid shaft with square flange pulses per revolution
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil
Brazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
General Information. Up to 31.5 MPa (4570 PSI), 1100L/min (291 U.S.GPM)
SOLNOID CONROLLD ILO ORD VLVS DSHG-//// ILO ORD VLVS DHG/// MNULL ORD VLVS DMG-//// DM-// Generl Informtion Up to. M (7 SI), L/min (9 U.S.GM) u. C- Solenoid contorolled ilot Operted Vlves... ge hese vlves
Application Examples of Air-piloted Valves
ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht
Mechanical Fail-Safe Damper Actuator NFA
2-FON echnicl Fil-Sfe Dmper Actutor NFA ctutor emergency function for djusting ir dmpers in ventiltion nd ir conditioning systems in uildings orque Nm Nominl voltge AC 24..4V / DC 24..V Control: Open-close
product range leading valve technology TM
1 product rnge leding vlve technology TM 01 y müller cox g ll technicl informtion is up to dte t the time of going to press. We reserve the right to mke technicl chnges. Unfortuntely, we cnnot exclude
MB-4 Chapters Monoblock Directional Control Valves
M-4 hapters Working condition.5 Ordering code.6 Dimensions.9 erformance data.0 Inlet relief options. Spool options.2 side options.20 side spool positioners.23 Other options.3 Outlet options.34 M-4 2 2
YOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 463 87 7 4468 45 9 OFFIE & FORY : No.9, LNE 45, I MING RD., WU ZIH DIS., IHUNG IY, IWN 4468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail :
HEATING BLANKETS FOR GENERAL COMPOSITE REPAIR
Innovtion in Technology for Aircrft Mintennce Equipment, Airline Support through Engineering & Trining Advnced Composite & Metllic Structures Cge Code - NATO Code : F7856 - Eur VAT- ID: FR90 328961073
SHEET 1 OF 6
REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE SENSOR WELD NECK MOUNTING FLNGE & WELD FTG. (FCTORY WELDED) VILBLE IN SME B16.5 RF & RTJ, ND EN 1092-1 RF. REFER TO TBLE 1 ON SHEET 2 OR FOR S ND DIMENSIONS NEW
11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
00083FAB-DC DRAWN BY DATE CHK SCALE SIZE
D0D/6 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. 0 5/4/8 SPLIT SIDE PNEL JGC TOP CP CURVED PERFORTED SINGLE HINGE DOOR SPLIT SIDE PNEL
E16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A
E1DU, E45DU, E80DU, E140DU electronic overlod relys 0.10 to 140 A Description 2CDC231001F0007 The E1DU up to E140DU re selfsupplied electronic overlod relys, which mens no extr externl supply is needed.
45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit
Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar
3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators
3-Wy Bll Vlve Assemblies Using TAC DurDrive Actutors Note: All vlve sizes ANSI Clss IV (0.01% of C v ) shut off, piped coil-side outlet to A. Tble-5 Selection Chrt3-Wy Mixing Bll Vlve Assemblies with TAC
YOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
Directional Control Valves. Features. Application. Operation
Catalog HY14-2502/US Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage 4-way valves. hey are available in 2 or 3-
TA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures