High Pressure, Subplate Mounted Directional Control Valves

Size: px
Start display at page:

Download "High Pressure, Subplate Mounted Directional Control Valves"

Transcription

1 ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H03 5 gpm (19 L/min) nominal psi (700 bar) H03 valves are rated for 5 gpm (19 L/min) nominal flow at pressures to psi (700 bar). Flows to 15 gpm (57 L/min) are possible with some models (See ypical Valve erformance, pages 3-). hese high performance valves operate reliably at pressures double that of conventional subplate mounted valves. he reliable sliding-spool valves provide true four-way control in a simple compact package. SMOOH, RECISE SHIFING Spool travel is exceptionally smooth because of a four-land spool design. dditional outboard lands provide greater support than two-land designs. alancing grooves provide precise centering, reducing silt buildup. Close tolerances assure accurate land sequencing and low leakage. RELILE VLVE SELING apered o-ring counterbores reduce leakage, by assuring seal retention in rapid cycling operation. Hightorque mounting prevents weepage. H03 Valve With Optional lug-in-erminal Solenoids SOLENOID DVNGES Solenoid models are quiet and weather-tight for extra-long life. Wet armature design eliminates dynamic seals and increases the available shifting forces. Static o-rings prevent external leakage. Weather-ight Solenoids MNUL OVERRIDE Solenoid override pins are made from corrosion-resistant brass for trouble-free operation. Convenient hand-actuated override, available as an option, provides solenoid override without the use of tools. LUG-IN ERMINL SOLENOIDS Optional solenoid plugs simplify electrical connections during installation and servicing. hese integral three-terminal, bi-polar plugs fit DIN Connector Standard 36 (Hirschmann GDM 9). Hand-ctuated Override LEVER-OERED MODELS Lever operated valves offer superior handle position flexibility. Choose from eight different locations to put the handle where it is best for operator convenience.

2 Valve Specifications and pplication Data SECIFICIONS Special Mounting lthough similar to standard NF D03 (CEO 3) valves in size, H03 valves require a special mounting pattern. Refer to page 5. Rated ressure psi (700 bar) Rated Flow 5 gpm (19 L/min) nominal; See ypical Valve erformance, page 3. ank ort ressure (Maximum) Manual Operated Models: 3000 psi (210 bar); Solenoid ctuated Models: Standard, 1000 psi (70 bar) dynamic, 3000 psi (210 bar) static; High ressure Option (H), 3000 psi (210 bar) dynamic, 00 psi (3 bar) static; Hydraulic and air actuated models: Standard, 10 SI (105 bar); Response ime (Full Stroke) Solenoid Energized:.C., 12 ms; D.C., ms Spring Returned:.C., 15 ms; D.C., ms Solenoids vailable with.c. or D.C. solenoids. For electrical options refer to ypical Model Code on page 8. For complete installation details on these options, refer to ulletin VES. Electrical Connections Standard Wiring ox with leads; Optional erminal Strip, Cable Grip or in Connector (N.F... standard ;.N.S.I. standard 93,55M-1981); Optional lug-in-erminal Solenoids fit DIN Connector Standard 36 (Hirschmann GDM 9) Explosion roof (EW Option) Solenoids with special enclosures are approved by UL and CS for use in hazardous locations. UL Classification: Class I, Group C, D; Class II, Group E, F, G CS and UL Recognized (C Option) Solenoid coils are printed with the symbol: (CS and UL Recognized) C vailable with 115/DF coils only. For other voltages, contact the Dynex sales department. ELECRICL D Solenoid Code ➀ Input Voltage (Volts) Frequency (Hz) Inrush Current (mps) Holding Current (mps) Holding ower (Watts) 115/DF 110.C (Dual Frequency) 115.C /DF 2.C (Dual Frequency) 230.C /DF 0.C (Dual Frequency) 60.C VDC 12 D.C VDC 2 D.C /60 EW 115.C ➀ Ordering Codes shown are for standard wire leads with wiring box. lug-in-erminal solenoids (Hirschmann GDM 9) are also available; see ypical Model Code on page 8. MNUL OERED MODELS Lever operated models offer handle position flexibility with four positions on either port end or port end of valve. In-the-field changes are easy, by removing the bracket assembly and rotating the handle to the desired position. o specify position, see the installation drawing on page 7 and refer to ypical Model Code on page 8. LICION D Flow ctuating attern Operating actuator opens flow path to port ( ). Operating actuator opens flow path to port ( ). Models with Code 6 operators, which are actuator centered, are the exception. Spring-centered or spring-offset models are spring positioned unless actuated continuously. Valves with detented operation can be actuated momentarily (minimum electrical signal duration, ms) to shift and hold the spool in that position. Mounting osition Unrestricted for all models. Standard Seals ll valves use fluorocarbon (Viton or Fluorel ) o-rings, providing greater fluid compatibility and improved temperature range performance. Fluid Recommendations to 10 SUS (7 to 323 cst) viscosity; - to 0 F (-29 to 93 C) temperature range. Filtration Five micron or better is recommended for this high pressure valve. Coil Resistance (Ohms ± 10%) Fine filtration is especially critical for sliding spool valves held in one position for long periods, subjected to high system pressures. Silting may cause spool sticking and improper shifting. o further prevent this occurrence, valves should be cycled periodically. Differential Cylinder Circuits High differential flows in cylinder circuits can cause any hydraulic valve to malfunction. Contact the Dynex sales department for a review of applications with differential flows ( versus, or versus ) above 6.6 gpm (25 L/min). ressure Surges Consistent with standard practice, the system should be protected from pressure surges. With a common tank line serving multiple valves, shifting of any spool valve can be affected by surges of oil. separate line to tank, or to another low pressure line, is recommended. his is particularly critical with detented models. 2

3 Selecting Spools and Internal Operators SOOL SELECION he table at right shows the most common spools. Refer to ypical Model Code on page 8 for a complete listing of spool types. Lever actuated models, with Code 1 or Code 2 internal operators, use ype 0 or ype 1 spools. ll other models with Code 1 or Code 2 internal operators use ype or ype 21 spools. ype 0 and ype 1 spools provide the same function, but are not interchangeable with ype or ype 21 spools. INERNL OERORS he table shows available internal operators with flow symbols. Note the following exceptions: Code 3 operators in models with lever actuators provide three position, detented operation. With Code and Code 6 operators, flow can be reversed with the R option. For example, with R in the model code, a Code operator with a ype 0 spool will direct flow to port ( ) in the actuated position. INERNL OERORS Operator Code ctuator, Operation Single ctuator, wo osition Single ctuator, wo osition Spool ypes FLOW CCIY SOLENOID MODELS Non- ctuated 0, Offset 1, Offset 0, Offset 1, Offset Operator Function ctuated Double ctuator, ll Detented in or wo osition ypes ctuated ositions Single ctuator, wo osition 0, 1, Spring Centered Spring Centered Double ctuator, ll Spring or hree osition ypes Centered Single ctuator, wo osition 0, 1,3 011 Spring Offset Spring Offset Centered Centered Single ctuator, Detented in or 0 or 1 wo osition ctuated ositions Function Symbol ypical Valve erformance SOLENOID MODELS he curves at right show typical flow capacity for each spool type. he letters in the Flow Curve Reference table identify the appropriate curve. For example, in the table under spool ype 0, curve L is called out for models with Code 5 internal operators and D.C. solenoids. Looking at the curves, L indicates a maximum capacity of 15 gpm (57 L/min) at pressures to psi (700 bar). RESSURE Operator Code R SI U.S. GM L/MIN 2 10 FLOW CURVE REFERENCE C D E G F 30 FLOW H J K L 1 ll ypes K L 2 ll ypes K L 3 ll ypes L 5 Solenoid ype Spool ype R 32 32R C. E L L L G C C D H D.C. & EW L L L L G G G L L L L.C. E L L L G C C D H D.C. & EW L L L L G G G L L L L 6 ll ypes L L L L F F F L L L J

4 LEVER OERED MODELS Most manual models are rated for 15 gpm (57 L/min) maximum. he exceptions are models with internal operators and spool types shown in the table below. FLOW LIMIIONS Operator Code Spool ype Maximum Flow gpm L/min ➀ 30 ➀ ➀ 30 ➀ ➀ 30 ➀ or 2R ➀ 30 ➀ ➀ 30 ➀ ➀ 8 gpm (30 L/min) at psi (700 bar). Flow capacity increases with reduced pressure; i.e., 11 gpm (1 L/min) at 00 psi (10 bar). ILO OERED MODELS he maximum flow for pilot operated models is dependent on pilot pressure. Generally, the maximum flow for most pilot operated valves is 8 gpm (30 L/min). When using a ype 011 spool (tandem center), the maximum flow rating is 6 gpm (23 L/min). Minimum ilot ressure he table at right shows the minimum pressure required to shift the spool at a nominal flow of 5 gpm (19 L/min). hese values are based on zero tank pressure. For hydraulic piloted models, as back pressure increases above zero, the minimum pilot pressure must be increased equally. Maximum ilot ressure Hydraulic, 3000 psi (210 bar); ir, 0 psi (1 bar) Volume Maximum required to shift spool full stroke: Hydraulic, 0.01 in 3 (0,23 cm 3 ); ir, 0.2 in 3 (3,61 cm 3 ) MINIMUM ILO RESSURE Series Spool ype ilot ressure at 5 gpm (19 L/min) psi bar 0 or 215 1,8 1 or , , Series 215 1,8 Hydraulic ,8 iloted 2 or 2R 360 2,8 32 or 32R , , ,8 0 or 35 2, 1 or , , 6900 Series 35 2, ir 011 3, iloted 2 or 2R 3, 32 or 32R 0 2, , , Determining Valve Efficiency RESSURE DRO he curves at right indicate pressure drop for all H03 valves, except manual operated (see page 5 for those curves). hese curves show resistance to flow for specific flow paths and various spool types. he Flow Curve Reference table identifies the proper curve. Maximum flow capacity depends on valve actuator, internal operator, spool type and other application factors. Refer to ypical Valve erformance on page 3. N EXMLE In the table under spool ype 1, curve D is called out to determine the pressure drop for. Looking at the curves, D indicates a drop of about 65 psi at 5 gpm (,5 bar at 19 L/min). o determine total loop drop, the individual pressure drops for and (or and ) must be added. RESSURE DRO ( ) LL MODELS EXCE LEVER CUED RESSURE R SI U.S. GM L/MIN FLOW 0 C D E F ➀ hese curves indicate efficiency for various spool types. For maximum flow capacity refer to curves on page 3. FLOW CURVE REFERENCE Flow Spool ype ath R 32 32R D E D C C C D E D C C C E E G G H E E E E E E E E E G G H E E E E E E E D D 60 G H

5 LEVER CUED MODELS he curves at right indicate pressure drop for lever actuated H03 valves. hese curves show resistance to flow for specific flow paths and various spool types. he Flow Curve Reference table identifies the proper curve. Maximum flow capacity depends on valve actuator, internal operator, spool type and other application factors. Refer to the Flow Limitations table on page. N EXMLE In the table under spool ype 1, curve C is called out to determine the pressure drop for. Looking at the curves, C indicates a drop of about 60 psi at 5 gpm (,1 bar at 19 L/min). o determine total loop drop, the individual pressure drops for and (or and ) must be added. RESSURE DRO ( ) LEVER CUED MODELS RESSURE C D R SI E 32 F G U.S. GM L/MIN FLOW FLOW CURVE REFERENCE Flow Spool ype ath R 32 32R C C C C F G G F D D D F F F F G G F D D D F F F Installation and Dimensions SECIL VLVE MOUNING he mounting surface drawing shows the minimum flush or raised surface required for this special pattern. Mounting face must be flat within inch/.0 inches (0,010 mm/102 mm) with a surface finish of 32 microinch (0,80 µm). ort o-rings are included with all valves. Mounting bolts must be ordered separately;.2- UNC hreaded x 0.75 inch (19 mm), Grade 8 or better; four required. Recommended mounting torque is 12 lb ft (16 N m) maximum..16 (,1);.16 (,1) DEE MINIMUM LOCING IN HOLE 32 (,80).000/.0 (,010/102) (,5).23 (5,9) 3 ORS.2 (6,35) 1 OR 2.00 (,8) (0,9).75 (12,07).8 (21,) (30,81).19 (,8) (31,75).157 (27,77) (3,99).625 (15,88).25 (6,) Minimum Mounting Surface, Special H03 attern.2 U.N.C. 2 HREDED.3 (10,9) DEE MINIMUM, MG. HOLES 5

6 SULE ND OL KIS Subplates are available for mounting H03 pattern valves, with a choice of S..E. or ritish Standard ipe (.S..) ports, or ports which fit utoclave or utech fittings. Mounting bolts are supplied with kit. When ordering together, valves are not mounted on subplates. KI R NUMERS art Number Description SO29-SE-6 Side orts, S..E. No. 6 SO29-S-6 Side orts,.s.. No. 6 SO U.N.-2 hreaded ➀ 11-K ().2- UNC (olt Kit) hreaded x 0.75 Inches (19 mm) For mounting EW models on (Spacer late) side-ported subplate/manifolds. For use with above spacer: 11-KE ().2- UNC (olt Kit) hreaded x 1. Inches (38 mm) ➀ High pressure port fits utoclave Medium ressure, utech M/ or equivalent fitting. SOLENOID MODEL DIMENSIONS Dimensions are shown, at right, for both.c. and D.C. solenoids; D.C. configuration shown printed in gray. Overall length of single solenoid configuration (not shown) is 6.78 inches (172,2 mm),.c.; and 7.39 inches (187,7 mm), D.C. Single Solenoid:.C., 3. lb (1,5 kg); D.C., 3.9 lb (1,8 kg) Double Solenoid:.C.,.0 lb (1,8 kg); D.C., 5.3 lb (2, kg).33 (8,71) WI H. (12,7) COUNERORE x (9,) DEE, 2 SULE MG. HOLES.2 U.N.C. 2 HREDED.3 (10,9) DEE MINIMUM, MG. HOLES (0,9) MNUL CUOR IN (30,81).75 (12,06).16 (,1).16 (,1) DEE MINIMUM LOCING IN HOLE 2.7 (69,6).38 (9,7) GRI 3.73 (9,7).88 (22,) (9,) (,) CLERNCE O REMOVE COIL 1.68 (2,7) (.C.) 2.30 (58,) (D.C.).625 (15,88) Subplate SO29-SE-6 or SO29-S-6 or SO30 SOL. FOR YE 0, 1, 3,, 03, 32, 32R, 36 ( OR 21 FOR CODE 1 OR 2 OEROR) SOOLS; SOL. FOR YE 011, 2, 2R SOOLS 1.88 (7,8).9 (23,9) 2.75 (69,8) [SO30 ONLY] 2. (63,5) (7,62).68 (11,89).68 (11,89) 1.2 (31,75).31 (7,9) (,) Y. 2 LCES (73,02) 3..8 (88,9) (21,).31 (7,9).2- U.N.C. HREDED x.75 (19,0) LONG MG. OLS, REQUIRED; ORQUE: 12 L F (16,3 N M) MXIMUM (3,3) 1.25 (31,8) Y. 2 LCES.62 (15,7) Y. LCES 5.00 (127,0).92 (23,) 8.5 (.C. SOLENOID) (216,9) 9.77 (D.C. SOLENOID) (28,2) 60 Series, Double Solenoid Models 1. (38,1), ND ORS (3) NO. 6 S..E. (MODEL SO29-SE-6), NO. 6.S.. (MODEL SO29-S-6), OR U.N.C. 2 HREDED, FIS UOCLVE MEDIUM RESSURE, UECH M/, OR EQUIVLEN(MODEL SO30). 0 1 N..., SNDRD ELECRIC ENRY, 1 ECH SIDE.125 (3,18) LOCING IN 32 (,80).000/.0 (,010/102) OR NO. 6 S..E. (MODELS SO29-SE-6 ND SO30), NO. 6.S.. (MODEL SO29-S-6) 2.51 (63,8) (.C.) 3.12 (79,2) (D.C.) SOL. FOR YE 0, 1, 3,, 03, 32, 32R, 36 ( OR 21 FOR CODE 1 OR 2 OEROR) SOOLS; SOL. FOR YE 011, 2, 2R SOOLS EXLOSION ROOF SOLENOIDS Solenoids with special enclosures are approved by UL and CS for use in hazardous locations (available.c. only). Overall length of single solenoid model (not shown) is 8.23 inches (9,0 mm). Note that spacer plate (No ) is required when valves are mounted on manifolds, side outlet subplates or when used as a pilot valve. Valves can be mounted without removing nameplate. Openings in plate provide access to mounting holes in valve body. Single Solenoid: 8.3 lb (3,8 kg); Double Solenoid: 1.0 lb (6, kg) 5.88 (22,) (,) CLERNCE O REMOVE COIL 1/2 INCH N... SND. ELECRIC ENRY, 360 ROLE WIH OOM OULE SULE 2.88 (73.2) (9,) 1 (28,7) GRI SOLENOID OSIION LIMI WIH SIDE OULE SULE 3.25 (82,6) MNUL CUOR IN 3.72 (170,7) 1.69 (2,9) SOL. FOR YE 0, 1, 3,, 03, 32, 32R, 36 ( OR 21 FOR CODE 1 OR 2 OEROR) SOOLS SOL. FOR YE 011, 2, 2R SOOLS SCER NO (1,) (3,3).2- U.N.C. HREDED x 1. (38,1) LONG MG. OLS, REQUIRED, ORQUE: 12 L F (16,3 N M) MXIMUM GROUNDWIRE (2) Y. #18 WG (GREEN INSULION) ROX 18 (57) LONG NOE: KEE IR G EWEEN SOLENOID ND VLVE ODY CLEN.125 (3,18) LOCING IN 12. (317,5) 60 Series, Double EW Solenoid Models LEDWIRES () Y. #18 WG, ROX 18 (57) LONG SOL. FOR YE 0, 1, 3,, 03, 32, 32R, 36 ( OR 21 FOR CODE 1 OR 2 OEROR) SOOLS SOL. FOR YE 011, 2, 2R SOOLS.75 (19,0).92 (23,).9 (11,0) 6

7 MNUL OERED MODELS Manual models are lever actuated, with handle located in a choice of four positions on either port or port end of valve. HNDLE OSIION FOR O FOR YE 0, 1, 3,, 03, 32, 32R, 36 SOOL; O FOR YE 011, 2, 2R SOOL HNDLE OSIION FOR O FOR YE 0, 1, 3,, 03, 32, 32R, 36 SOOL; O FOR YE 011, 2, 2R SOOL Valves can be mounted without removing nameplate. Openings in plate provide access to mounting holes in valve body. o specify handle position, see the drawing below and refer to ypical Model Code on page lb (1,5 kg) HNDLE OSIION FOR O FOR YE 0, 1, 3,, 03, 32, 32R, 36 SOOL O FOR YE 011, 2, 2R SOOL 2.09 (53,1).38 (9,7) GRI 1. (36,6).9 (23,9) 5.5 (138,) 9 or 9 12 or 12 3 or (3,18) LOCING IN (3,3).03 (102,) 5.21 (132,3) 5.83 (18,1) WIH HNDLE OFFSE (9,).88 (22,) (,).2- U.N.C.HREDED x.75 (19,0) LONG MG. OLS, REQUIRED, ORQUE: 12 L F (16,3 N M) MXIMUM 6 or 6 Handle osition Viewed from ort or ort End of Valve 6100 Series, Manual Lever Operated Models HYDRULIC ILOED MODELS Single and double actuator models are available. Overall length of single actuator configuration (not shown) is 5.25 inches (133, mm). Valves can be mounted without removing nameplate. Openings in plate provide access to mounting holes in valve body. Refer to page for required shifting pressure and volume. Single ctuator: 2.5 lb (1,1 kg); Double ctuator: 2.8 lb (1,3 kg) ILO FOR YE 0, 1, 3,, 03, 32, 32R, 36, ( OR 21 FOR CODE 1 OR 2 OEROR) SOOLS; ILO FOR YE 011, 2, 2R SOOLS.87 (22,1) HEX.2- U.N.C. HREDED X.75 (19,0) LONG MG. OLS, REQUIRED, ORQUE: 12 L F (16,3 N M) MXIMUM 6.7 (16,3) 1.7 (37,3) (3,3) 125 (3,18) LOCING IN.92 (23,) ILO OR (2) NO. S..E. O-RING SR. HR'D (53,1).9 (23,9) 6800 Series, Double Hydraulic iloted Models ILO FOR YE 0, 1, 3,, 03, 32, 32R, 36, ( OR 21 FOR CODE 1 OR 2 OEROR) SOOLS; ILO FOR YE 011, 2, 2R SOOLS (9,) (,5).38 (9,7) GRI.87 (22,1) IR ILOED MODELS Single and double actuator models are available. Overall length of single actuator configuration (not shown) is 5.56 inches (11,2 mm). Valves can be mounted without removing nameplate. Openings in plate provide access to mounting holes in valve body. Refer to page for required shifting pressure and volume. Single ctuator: 2.3 lb (1,0 kg); Double ctuator: 2.5 lb (1,1 kg) ILO FOR YE 0, 1, 3,, 03, 32, 32R, 36, ( OR 21 FOR CODE 1 OR 2 OEROR) SOOLS ILO FOR YE 011, 2, 2R SOOLS 1.25 (31,8) HEX (3,3).2- U.N.C. HREDED x.75 (19,0) LONG MG. OLS, REQUIRED, ORQUE: 12 L F (16,3 N M) MXIMUM 7.09 (180,1).92 (23,) 1.78 (5,2) 125 (3,18) LOCING IN 6900 Series, Double ir iloted Models 2.09 (53,1).9 (23,9) ILO FOR YE 0, 1, 3,, 03, 32, 32R, 36, ( OR 21 FOR CODE 1 OR 2 OEROR) SOOLS ILO FOR YE 011, 2, 2R SOOLS ILO OR (2) 1/8 INCH N... (9,) (,5).38 (9,7) GRI.87 (22,1) 7

8 6 5 0 H03 115/DF R * SL Valve ype 6 Subplate Mounted Directional Control H03 Valve Size High ressure, psi (700 bar), Special Mounting attern Reverse Flow Operator (Code and 6 Only) R Code : wo osition; Spring Centered, ctuator Offset ( ) Code 6: wo osition; Spring Offset ( ), ctuator Centered Design Number ctuator 1 Manual Lever 5 Solenoid Operated 8 Hydraulic iloted 9 ir iloted Internal Operator 1 wo osition; Spring Offset ( ), ctuator Offset ( ) ➀ 2 wo osition; Spring Offset ( ), ctuator Offset ( ) ➀ 3 wo osition; ctuator Offset, Detented for Non-Manual ctuators hree osition; Detented for Manual Lever wo osition; Spring Centered, ctuator Offset ( ) ➁ 5 hree osition; Spring Centered, ctuator Offset 6 wo osition; Spring Offset, ctuator Centered ➁ 7 Manual Lever Only: wo osition, Detented ➀ Only available with ype and ype 21 spools (except manual lever models). ➁ Not available with Manual Lever Operated valves. Spools 0, ➀ 2 ➁ 1, 21 ➀ 2R ➁ 3 ➁ 32 ➁ ➁ 32R ➁ 011 ➁➃ 36 ➁ 03 ➂ ➀ Code 1 or Code 2 operators (non-lever actuated models) use ype or ype 21 spools. hese spools provide the same function, but are not interchangeable with ype 0 or 1 spools. ➁ Not available with Code 1, Code 2, or Code 3 Internal Operators (except manual lever models). ➂ Not available with Code 1 or Code 2 Internal Operators (except manual lever models). ➃ Open crossover. C M CG SL H SNDRD SOLENOIDS: 2/DF Dual Frequency, 2/60, 2/ 115/DF Dual Frequency, 115/60, 110/ 230/DF Dual Frequency, 230/60, 2/ 60/DF Dual Frequency, 60/60, 0/ 12VDC Direct Current, 12 Volts 2VDC Direct Current, 2 Volts 12VDC EW Explosion roof Solenoids 2VDC EW Explosion roof Solenoids 115/60 EW Explosion roof Solenoids 110/ EW Explosion roof Solenoids 2/ EW Explosion roof Solenoids Lever osition (Manual Models Only) o clock position, on port end of valve 9 9 o clock position, on port end of valve 6 6 o clock position, on port end of valve 3 3 o clock position, on port end of valve o clock position, on port end of valve 9 9 o clock position, on port end of valve 6 6 o clock position, on port end of valve 3 3 o clock position, on port end of valve Options (Solenoid Models Only) CS and UL Recognized Coils (Etched with Symbol) ➀ Hand ctuated Manual Override ➁ erminal Strip ➁➂ Cable Grip, for 3/8 to 7/16 inch (9,5 to 11,1 mm) O.D. machine tool cable ➁➂ Solenoid Lights (vailable 115/DF.C. Only) ➁➂ High ressure ank ort 2300 SI (160 bar) maximum.c. models 3000 SI (210 bar) maximum D.C. models H3 3-pin Connector, for single solenoid models, on port end of valve ➁➂➃ H3 3-pin Connector, for single solenoid models, on port end of valve ➁➂➃ H5 5-pin Connector, for single or double solenoid models, on port end of valve ➁➂➃ H5 5-pin Connector, for single or double solenoid models, on port end of valve ➁➂➃ ➀ vailable with 115/DF solenoids only. For other voltages, consult the Dynex sales department. ➁ Option not available with EW solenoid models. ➂ Option not available with lug-in-erminal solenoid models. ➃ NF standard ; NSI standard 93.55M Electrical Solenoid Options For Other Voltages, Consult the Dynex Sales Department ➀ Fits DIN Connector Standard 36 (Hirschmann GDM 9) LUG-IN ERMINL SOLENOIDS: ➀ 115/HC Dual Frequency, 115/60, 110/ 230/HC Dual Frequency, 230/60, 2/ 12/HDC Direct Current, 12 Volts 2/HDC Direct Current, 2 Volts US Headquarters Dynex/Rivett Inc. 770 Capitol Drive ewaukee, WI el: (1) FX: sales@dynexhydraulics.com Web Site: ower Units & Systems Dynex/Rivett Inc. 5 Nickerson Road shland, M el: (8) FX: European Sales Dynex/Rivett Inc. Unit C5 Steel Close, Little End Road, Eaton Socon, Huntingdon, Cambs. E19 3JH United Kingdom el: + (0) FX: + (0) Copyright Dynex/Rivett Inc. rinted in U.S.. ulletin VES.H03-E099

High Pressure, Subplate Mounted Directional Control Valves

High Pressure, Subplate Mounted Directional Control Valves ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SECIFICIONS D0H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol Drive

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICIONS D08H Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICAIONS D05 Pattern Directional Control Valves Also refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONAC INFORMAION USA Headquarters Dynex/Rivett

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: DIRECIONL VLVE OERION Directional Valve Features, Selection and Operating Recommendations CONC INFORMION US Headquarters Dynex/Rivett Inc. 770 Capitol Drive ewaukee, WI 3072 U.S.. el: 262-69-2222 FX: 262-69-032

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICATIONS D03 Pattern Directional Control Valves Also refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONTACT INFORMATION USA Headquarters Dynex/Rivett

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICTIONS D08 Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONTCT INFORMTION US Headquarters Dynex/Rivett

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICTIONS D08H Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONTCT INFORMTION US Headquarters 770 Capitol

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICTIONS D08 Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONTCT INFORMTION US Headquarters Dynex/Rivett

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICATIONS HP5 Pattern Directional Control Valves Also refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONTACT INFORMATION USA Headquarters Dynex/Rivett

More information

Directional Control Valves. General Description. Operation. Features

Directional Control Valves. General Description. Operation. Features echnical Information Series D61VW General Series D61VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are

More information

Directional Control Valves. Features. Application. Operation

Directional Control Valves. Features. Application. Operation Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold

More information

Directional Control Valves Series D81V. General Description. Operation. Features. Specifications

Directional Control Valves Series D81V. General Description. Operation. Features. Specifications echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or

More information

Directional Control Valves. Application. Features. Operation. D3W Solenoid Operated Conduit Cavity Style. D3W Solenoid Operated Hirschmann (DIN) Style

Directional Control Valves. Application. Features. Operation. D3W Solenoid Operated Conduit Cavity Style. D3W Solenoid Operated Hirschmann (DIN) Style Catalog HY14-2500/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3-position. hey are manifold mounted which

More information

Directional Control Valves. General Description. Operation. Features

Directional Control Valves. General Description. Operation. Features echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or

More information

Directional Control Valves. Application. Features. Operation

Directional Control Valves. Application. Features. Operation Catalog HY14-2502/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or

More information

Directional Control Valves. General Description. Operation. Features

Directional Control Valves. General Description. Operation. Features echnical Information Series D101VW General Series D101VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are

More information

Hydraulics 1. Directional Control Valves Series D1M. Features. Application. Operation. D1MW Solenoid Operated Free Lead Wire

Hydraulics 1. Directional Control Valves Series D1M. Features. Application. Operation. D1MW Solenoid Operated Free Lead Wire ulletin 2544-1/US Introduction pplication arker D1M Series hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3 position styles. hey are

More information

Directional Control Valves. Application. Features. Operation.

Directional Control Valves. Application. Features. Operation. Catalog HY14-2500/US Introduction pplication Series D101 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or

More information

Directional Control Valves. Application. Features. Operation

Directional Control Valves. Application. Features. Operation Catalog HY14-2500/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or

More information

Operation. D1VW Solenoid Operated Plug-In Conduit Box Style

Operation. D1VW Solenoid Operated Plug-In Conduit Box Style Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform

More information

Pilot Operated Directional Valves

Pilot Operated Directional Valves ilot Operated Directional Valves Catalog DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) NF D10, ISO-4401-10,

More information

Operation. D1VW Solenoid Operated Plug-In Conduit Box Style

Operation. D1VW Solenoid Operated Plug-In Conduit Box Style Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform

More information

Operation. D1VW Solenoid Operated Plug-In Conduit Box Style

Operation. D1VW Solenoid Operated Plug-In Conduit Box Style Catalog HY14-2500/US Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted

More information

D07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:

D07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax: GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,

More information

Directional Control Valves. Features. Application. Operation

Directional Control Valves. Features. Application. Operation Catalog HY14-2502/US Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage 4-way valves. hey are available in 2 or 3-

More information

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US LH Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US echnical Information General Description Series D1VW directional control

More information

Directional Controls

Directional Controls VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................

More information

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US LH SECION Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories echnical Information General Description Series D61VW directional control valves

More information

Directional Control Valves

Directional Control Valves echnical Information General Description he D1VW Series directional control valves are highperformance, 4-chamber, direct operated, wet armature solenoid controlled, 3 or 4-way valves. hey are available

More information

Directional Controls

Directional Controls Vickers Directional Controls Mechanical ctuators Directional Control Valves Directional Control Valves 310 bar (4500 psi) Flows to 114 l/min (30 USgpm) NF D05, ISO-4401-05 DG1V4-01**-10 Knob Operated DG17V4-01**-10

More information

Bar 35 PSI 500. Pressure Drop L/M GPM. Flow

Bar 35 PSI 500. Pressure Drop L/M GPM. Flow NF D3 O E R I N G N D E C H N I C L D RINGS Maximum Flow... See Chart Maximum Operating ressure (, and orts)... 3 ar ( SI) Maximum ank Line ressure... 13 ar (1 SI) Mounting attern... ISO 441--3-4-, NF-D3

More information

Directional Control Valves. Features. Application. Operation

Directional Control Valves. Features. Application. Operation Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and

More information

Operation. D3W Solenoid Operated Conduit Box Style. D3W Solenoid Operated Hirschmann (DIN) Style

Operation. D3W Solenoid Operated Conduit Box Style. D3W Solenoid Operated Hirschmann (DIN) Style Catalog HY14-252/US Introduction pplication arker D3 Series hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3 position. hey are manifold mounted

More information

p max (see table of performances) Q max (see table of performances) MD1K MD1KD bar

p max (see table of performances) Q max (see table of performances) MD1K MD1KD bar 41 510/107 ED EXLOSION-ROOF VERSION SOLENOID OERED DIRECIONL CONROL VLVES in compliance with EX 94/9/CE SERIES 21 MD1K-MD1KD ISO 4401-03 (CEO 03) E44K-E44KD CEO 05 E074K-E074KD ISO 4401-07 (CEO 07) E54K-

More information

Directional Controls

Directional Controls Vickers Directional Controls ilot Operated Directional Valves DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000

More information

IFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08

IFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08 IF DG8 SOLENOID CONROLLED ILO OERED DIRECIONL VLVE SIZE NG/CEO8 Certifiction CE Certified -119115 1 ISO 91: FEurES : Highest performnce in NG Optimized spool design to reduce flow force roven qulity through

More information

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US LH Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US Industrial Hydraulic Valves LH WRNING USER RESONSIILIY FILURE OR IMROER

More information

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US Industrial Hydraulic Valves WRNING USER RESONSIILIY FILURE OR IMROER SELECION

More information

Série D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US

Série D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US Série D3 Válvula Direcional CETOP 5 e NG 10 Catálogo HY14-2502/US Catalog HY14-2502/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way

More information

Directional control valves NG6...NG32 D03...D10 6

Directional control valves NG6...NG32 D03...D10 6 Directional control valves NG6...NG32 D03...D10 6 DIRECIONL CONROL VLVES 1 Index DO3 (NG6) age 2 to 22 D05 (NG10) age 23 to 42 D07 (NG16) age 43 to 54 D08 (NG25) 3000 SI age 55 to 65 D08 (NG25) 4600 SI

More information

45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit

45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar

More information

Pilot Operated Directional Valves

Pilot Operated Directional Valves ilot Operated Directional Valves Catalog DG3V-8; 7 l/min (185 USgpm) 35 bar (5 psi) DG5V-8; 7 l/min (185 USgpm) 35 bar (5 psi) NF D8, ISO-441-8, CEO 8 Introduction General Description he Size 8 Directiona

More information

YOULI HYDRAULIC INDUSTRIAL CO.,LTD.

YOULI HYDRAULIC INDUSTRIAL CO.,LTD. YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH, IHUNG HSIEN, IWN 41468, RO. EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/

More information

YOULI HYDRAULIC INDUSTRIAL CO.,LTD.

YOULI HYDRAULIC INDUSTRIAL CO.,LTD. YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional

More information

IFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07

IFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07 ILO OERED DIRECIONL VLVE SIZE NG-1 / CEO-7 Certifiction CE Certified -119115 1 ISO 91: FEURES : Highest performnce in NG 1 Optimized spool design to reduce flow force roven qulity through 1 million endurnce

More information

DFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>

DFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN> DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.

More information

DIRECTIONAL VES. Components For The Control Of A Wide Range Of Operating Flows And Pressures

DIRECTIONAL VES. Components For The Control Of A Wide Range Of Operating Flows And Pressures HYD RULI DIREIONL O NROL VLVES VES omponents For he ontrol Of Wide Range Of Operating Flows nd ressures V, DV, ND RORY DIREIONL ONROL VLVES; FOR FLOWS U O 20 GM (76 LM) ND WORKING RESSURES U O 2,500 SIG

More information

CTSN-4 Content Sectional Directional Control Valves

CTSN-4 Content Sectional Directional Control Valves SN-4 ontent Specifications.5 Ordering code.7 Dimensions.12 erformance data.13 Inlet relief options.14 Spool options.15 side options.20 side spool positioners.23 ort relief.29 Outlet options.30 1 For Mobile

More information

YOULI HYDRAULIC INDUSTRIAL CO.,LTD.

YOULI HYDRAULIC INDUSTRIAL CO.,LTD. YOULI HYDRULI INDUSRIL O.,LD. 463 87 7 4468 45 9 OFFIE & FORY : No.9, LNE 45, I MING RD., WU ZIH DIS., IHUNG IY, IWN 4468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail :

More information

Bankable Control Valves

Bankable Control Valves Hydraulics ankable Control Valves Catalog 3123/US Catalog 3123/US Contents ankable Control Valves WRNING FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS ND/OR SYSEMS DESCRIED HEREIN OR RELED IEMS

More information

Part Number Spool Qty Max Flow Max Pressure Ports. 80 lpm

Part Number Spool Qty Max Flow Max Pressure Ports. 80 lpm Monoblock Valves M5 Monoblock, 80 lpm, Max 315 ar art Number Spool Qty Max Flow Max ressure orts M5/1S3/18L/G4-6 ylinder 1 M5/2S3/18L/G4-6 ylinder 2 M5/3S3/18L/G4-6 ylinder 3 M5/4S3/18L/G4-6 ylinder 4

More information

YOULI HYDRAULIC INDUSTRIAL CO.,LTD.

YOULI HYDRAULIC INDUSTRIAL CO.,LTD. YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail

More information

MB-4 Chapters Monoblock Directional Control Valves

MB-4 Chapters Monoblock Directional Control Valves M-4 hapters Working condition.5 Ordering code.6 Dimensions.9 erformance data.0 Inlet relief options. Spool options.2 side options.20 side spool positioners.23 Other options.3 Outlet options.34 M-4 2 2

More information

Directional Control Valves. General Description. Features. Specifications

Directional Control Valves. General Description. Features. Specifications Technical Information General Description directional control valves are high-performance, 4-chamber, direct operated, wet armature, solenoid controlled, 3 or 4-way valves. They are available in 2 or 3-position

More information

EManually Operated Directional Valves

EManually Operated Directional Valves DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM-- -

More information

Directional Control Valves Series D111VW. General Description. Features. Performance Curves

Directional Control Valves Series D111VW. General Description. Features. Performance Curves Technical Information General valves are piloted by a D1VW valve. The valves can be ordered with position control. The minimum pilot pressure must be ensured for all operating conditions of the directional

More information

Directional Controls

Directional Controls VICKERS Directional Controls DG3V-7, 20 Series, ilot Operated DG5V-7, 40 Series, Solenoid Controlled, ilot Operated ISO 440 Size 07 ypical Section DG5V-7-2C Spring-Centered Valve Example Basic Characteristics

More information

Rexroth Hydraulics. Servo directional valve of 4-way design Type 4WS.2EM RE /03.99

Rexroth Hydraulics. Servo directional valve of 4-way design Type 4WS.2EM RE /03.99 RE 29 564/03.99 Replaces: 29 563 Servo directional valve of 4-way design ype 4WS.2EM Nominal size 6 Series 2X Maximum operating pressures 210 / 315 bar Maximum flow 40 L/min H//D 5994/98 ype 4WS2EM 6-2X/.E...K17EV

More information

MB-2 Chapters Monoblock Directional Control Valves

MB-2 Chapters Monoblock Directional Control Valves M-2 hapters Working condition.5 Ordering code.6 Dimensions.8 erformance data.9 Inlet relief options.1 Spool options.11 side options.14 side spool positioners.16 Inlet options.2 1 For Mobile nd Industrial

More information

ANTI-SHOCK DIRECTIONAL CONTROL VALVES

ANTI-SHOCK DIRECTIONAL CONTROL VALVES ACTUATED, DIRECT OPERATED TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may e reduced from that shown if a three-way circuit (half circuit)

More information

Directional Control Valves

Directional Control Valves Frequently sked Questions Frequently sked Questions What is the function of a directional control valve? directional control valve is the extend and retract control for your hydraulic cylinders. It provides

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves motion and progress 200 991210 03 / 10.04 1/220 HDS11 8 Sectional directional control valves HDS11 8 Standard valves................................................................

More information

Proportional Directional Valve System

Proportional Directional Valve System roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3

More information

MDT. Monoblock directional control valves MDT - Directional control valve

MDT. Monoblock directional control valves MDT - Directional control valve Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal

More information

Hydro M t HYDRAULIC VALVES SN-4.

Hydro M t HYDRAULIC VALVES SN-4. Hydro HYDRAULI VALVES A SRONG OMMIMEN O QUALIY Our concept is to sell and deliver the best quality of hydraulic valves, that fully meet our customer s rigorous requirements! o this end, our quality control

More information

4/2- and 4/3-Way Proportional Directional Control Valve Direct Operated, Model 4 WRA (Series 1X) PSI (315 bar) H/A 1768

4/2- and 4/3-Way Proportional Directional Control Valve Direct Operated, Model 4 WRA (Series 1X) PSI (315 bar) H/A 1768 /- and /-Way roptional Directional Control Valve Direct Operated, Model WR (Series X) Size 6 and... 6 SI ( bar).... GM (9 L/min) R 9 /6.98 R 9 /6.98 Replaces:.9 Characteristics: F the open loop control

More information

"G" SERIES SHOCKLESS TYPE SOLENOID OPERATED DIRECTIONAL VALVES G-DSG-01/03 (1/8, 3/8) "G" SERIES SHOCKLESS TYPE

G SERIES SHOCKLESS TYPE SOLENOID OPERATED DIRECTIONAL VALVES G-DSG-01/03 (1/8, 3/8) G SERIES SHOCKLESS TYPE "G" SRIS SHOCKLSS Y NOID ORD DIRCIL VLVS G-DSG-1/3 (1/, 3/) "G" SRIS SHOCKLSS Y NOID CROLLD ILO ORD DIRCIL VLVS G-DSHG-/ (1/, 3/) Mounting Up to 5 Ma (33 SI), 5 L /m in (.1 U.S.GM) ub. C-5 DIRCIL CROLS

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICATIONS Pressure Compensated Checkball Piston Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA

More information

Solenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)

Solenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) Hydraulic Screw-in Cartridge Valves (SiCV) Solenoid valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Solenoid valves SOLENOID VLVES...- SV5-8-C/CM

More information

Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.

Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1. Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid

More information

Accessories. Subplates and Connection Plates for Four-Port Directional Valves. Vickers. ISO 4401, 02/03/05/07/08 General Description.

Accessories. Subplates and Connection Plates for Four-Port Directional Valves. Vickers. ISO 4401, 02/03/05/07/08 General Description. Vickers ccessories Subplates and Connection lates for Four-ort Directional Valves ISO 4401, 02/03/05/07/08 General Description his range of subplates and auxiliary connection plates offers an economical

More information

Solenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32

Solenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32 www.atos.com able E0854/E Solenoid al valves DHI, DHE, DHER two stage, ISO 440 size 0, 6, 5 and 3 DHI, DHE and DHER are spool, two or three position, two stage al solenoid valves. hey are operated by a

More information

Functional Symbols and Application Notes

Functional Symbols and Application Notes Functional Symbols and pplication Notes Model Types KHDG5V Shown Simplified symbol Model Types KHDG5V Shown K()FDG5V symbols identical, but omit pilot-stage LVDTs Simplified symbol T T Detailed symbol

More information

D03 FluiDyne Valves. ENGINEERING DATA

D03 FluiDyne Valves.   ENGINEERING DATA ENGINEERING D D3 FluiDyne Valves 4 Way, and 3 Postion Solenoid Operated Variety of Voltage and Spool Configurations Same Day Shipments 1 Month Warranty www.fluidynefp.com D3 FluiDyne Valves: 4 Way, and

More information

Direct Operated Proportional DC Valves

Direct Operated Proportional DC Valves echnical Information Direct Operated roportional DC Valves Series D1F and D3F General Series D1F and D3F directional control valves of nominal sizes NG6 (CEO 3) and NG10 (CEO 5) respectively, provide variable

More information

SECTION TITLE HEC2003/2004 SERIES SERVO VALVE SYSTEM ACCESSORIES KEY FEATURES

SECTION TITLE HEC2003/2004 SERIES SERVO VALVE SYSTEM ACCESSORIES KEY FEATURES SECION ILE HEC2003/2004 SERIES SERVO VLVE SYSEM he HEC2003/2004 Series Servo System features a high response servo valve, a manifold mounted filter, and three different mechanical mounting options. he

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICATIONS PF4200 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters

More information

EManually Operated Directional Valves

EManually Operated Directional Valves DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM--B -

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICATIONS PF3000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters

More information

RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.

RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8. R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to

More information

Directional Control Valve Series 4D01 (DENISON)

Directional Control Valve Series 4D01 (DENISON) Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift

More information

Proportional Valves. Proportional Directional and Throttle Valves Solenoid Operated

Proportional Valves. Proportional Directional and Throttle Valves Solenoid Operated Vickers roportional Valves roportional Directional and hrottle Valves Solenoid Operated KDG4V-3S and KG4V-3S standard performance series K()DG4V-3 and K()G4V-3 high performance series ISO 4401-03 (NF D03)

More information

High Response Type Proportional Electro-Hydraulic Directional and Flow Control Valves

High Response Type Proportional Electro-Hydraulic Directional and Flow Control Valves igh Response ype roportional Electro-ydraulic s igh response, high precision and high reliability are achieved by a combination of compact and powerful solenoid and spool-position-detection LVD. Direct

More information

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.

More information

VSD10M DIRECTIONAL CONTROL VALVES SOLENOID ACTUATED, PILOT OPERATED

VSD10M DIRECTIONAL CONTROL VALVES SOLENOID ACTUATED, PILOT OPERATED NFPA SIZE D10 TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may be reduced from that shown if a three-way circuit (half circuit) is used,

More information

Directional Control Valves

Directional Control Valves Frequently sked Questions N-1 Frequently sked Questions What is the function of a directional control valve? directional control valve is the extend and retract control for your hydraulic cylinders. It

More information

High Pressure, High Flow Rate Modular Valves

High Pressure, High Flow Rate Modular Valves eatures Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly and easily. roblems such

More information

280 Series Stainless Steel Rotary Direction Control Valve For hydraulics in a harsh environment.

280 Series Stainless Steel Rotary Direction Control Valve For hydraulics in a harsh environment. 280 Series Stainless Steel Rotary Direction ontrol Valve For hydraulics in a harsh environment. he 280 Series is a high pressure, 316 stainless steel, hydraulic rotary direction control valve. It is the

More information

These valves may be used to manually shift the spool position and change the direction of oil flow *2 1.8

These valves may be used to manually shift the spool position and change the direction of oil flow *2 1.8 DIRCINL CNRLS Manually perated Directional s hese valves may be used to manually shift the spool position and change the direction of oil flow. IC--1005-0 Specifications Numbers DMG-01-C -10 DMG-01-D -10

More information

Pilot Operated Directional Valves

Pilot Operated Directional Valves ilot Operated Directional Valves Catalog DG3V-7, 20 Series, ilot Operated DG5V-7, 40 Series, Solenoid Controlled, ilot Operated ISO 440 Size 07 able of Contents DG3V-7 20 Series, ilot Operated Directional

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional irectional Control Valves motion and progress 200--991210-N-03/09.2015 - - - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 Standard valves... p.101 Contents 8.1

More information

D05 Directional Control Valves

D05 Directional Control Valves Engineering D05 Directional Control Valves WFDG4S*4-01, 60 Design Wet Armature Solenoid Operated Max Pressure up to 248 Bar (3600 psi) Same Day Shipments www.fluidynefp.com Table of Contents Basic Characteristicts...2

More information

Open center control block in mono block design MO-16, 22, 32

Open center control block in mono block design MO-16, 22, 32 Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves 200--991210-N-03/09.2015 03 / 10.04 1/220 11 Sectional directional control valves HDS30 Contents 11.1 General specifications 197 11.2 Dimensional data

More information

Type : V20 Nominal Flow : 80 LPM Maximum Flow : 135 LPM (36 GPM) Max. Pressure : 350 Bar (5000 psi) Medium : Mineral Oil

Type : V20 Nominal Flow : 80 LPM Maximum Flow : 135 LPM (36 GPM) Max. Pressure : 350 Bar (5000 psi) Medium : Mineral Oil ype : V20 Nominal Flow : 80 LM Maximum Flow : 135 LM (36 GM) Max. ressure : 350 ar (5000 psi) Medium : Mineral Oil Introduction: VELJN V20M Mobile directional control valve is a segment type design that

More information

Proportional Valves. Proportional Two-Stage Directional Valves

Proportional Valves. Proportional Two-Stage Directional Valves VICKERS roportional Valves roportional Two-Stage Directional Valves KHDG5V-5/7, 1 Series ressures to 3 bar ( psi) This product has been designed and tested to meet specific standards outlined in the European

More information