SOLENOID VALVES / DIRECTIONAL CONTROL VALVES

Transcription

1 SOLENOID VALVEHD*-WY* SIZE Fetures HD3 Series (for MP) HD Series (for MP). ompct. Directly controllle y. High pressure nd lrge cpcity progrmmle controller 3. Incresed rted flow rte since the vlve opertes t low power. (Refer to the 4. Incresed permissile ck pressure solenoid chrcteristics).. Dust- nd wter-proof to IE IP6 (IP 67 for M-4 pin type) 6. Lmp nd grounding terminl re stndrd equipment. 7. Surge killer is stndrd equipment. Plese red the Operting Mnul utions on use crefully to ensure correct usge. Description of the model designtion Mx operting pressure (NOTE ) : MP 3: MP : 3 MP Switching function 3W : Spring center type WD: No spring detent type S : Spring offset type Spool type Refer to the SPOOL TYPES tle. Nominl size : onforming to ISO Model code B: Terminl ox type : M-4 pin type (HD-WYD only) Low-pressure Type High-pressure Type * * * * * 3* 3* 3* 3* NOTE : A solenoid vlve of 3 (MP) operting pressure is ville only for the B series. NOTE : The vlve with quick return function provides fster response for switching to OFF. NOTE 3: Mounting olt is M olt. Series selection tle Series Power Source D A Low Voltge The piping must e rrnged so tht the R port is lwys filled with fluid to mke the most of the fetures of the oil-immersed type vlve. When instlling no-spring type vlve, instll it so s to set the spool horizontlly. Finish the mounting fces to the sme qulity s the vlve fces (3. mrz). Using vlve with the R port plugged cn cuse opertion filure. For vlves with detent, to hold the spool position without supplying power to the solenoid the ck pressure must e MP or lower for the HD3 series or MP or lower for the HD series. Where PL is connected directly, select type with the diode or M -4 pin connector type to protect the PL output crd. R + Vristor Diode Diode Rectifier Rectifier R + Vristor Diode Rectifier Rectifier Option functions M-4 pin connector type (only for HD-*-*--WYD type) A: Lod side OMMON right side B: Lod side OMMON left side : Lod side +OMMON right side D: Lod side +OMMON left side Quick return function (NOTE ) (only for HD*-*-*-B-WYR*) H: Quick return With diode (only for HD*-*-*-B-WYD) S: Lod side -OMMON T: Lod side +OMMON Voltge indiction D: D 4 V R: A V R: A V Wiring method WY: le connection to the side of the terminl ox Surge Asorer M 4-pin onnector Quick Return omptiility to DeviceNet (NOTE 4) SOLENOID VALVES / DIRETIONAL ONTROL VALVES NOTE4: Select the slve unit crefully since the solenoid current vlue is high.

2 Vlve specifictions SOLENOID VALVES / DIRETIONAL ONTROL VALVES Series HD HD3 HD Mx. operting pressure Mx. flow (NOTE ) MP L/min Permissile ck pressure t T port (NOTE 6) MP 6 6 Switching frequency Permissile voltge vrition rnge Protection structure clss Hydrulic fluid clenliness Operting fluid (recommendtion) Viscosity Fluid temperture Amient temperture YLE/s /s or lower Rted voltge ±% V IE9 IP667 NOTE 7 omplying with ISO8-lss NAS638-lss ISO VG346 to 4 to 6 to Tightening torque Mss N m 6 to 8 3WWD.S.8 8 to 9 NOTE : For detils, refer to the opertion limit. NOTE 6: Vlues in prentheses re for the detent type. NOTE 7: Protective structure clss (IP67) is pplicle to M-4 pin type connector. Solenoid specifictions HD Series Solenoid model SLHBD Rted voltge D4V Frequency Holding current.a Power consumption 4.8W Voltge vrition rnge SLHBR AV /6Hz.7A 6.W ±%V SLHBR AV /6Hz.4A 7.W Terminl ox Size B A type Solenoid Rted Terminl Box Voltge Doule Solenoid Type Single Solenoid Type R AV HD 3 ******BWY R AV TBH3BRW TBH3BRS R AV HD 3 ******BWY R H AV TBH3BRWHA TBH3BRSHA Size type Solenoid HD ******WY D A HD ******WY D B HD ******WY D HD ******WY D D Rted Voltge D4V D4V D4V D4V Terminl Box Doule Solenoid Type Single Solenoid Type TBH3DWMA TBH3DSMA TBH3DWMB TBH3DSMB TBH3DWM TBH3DSM TBH3DWMD TBH3DSMD HD3 / HD Series Solenoid model SLHBD Rted voltge D4V Frequency Holding current.a Power consumption 9W Voltge vrition rnge SLHBR AV /6Hz.3A 3W ±%V SLHBR AV /6Hz.9A 33W Size B D type Solenoid Rted Terminl Box Voltge Doule Solenoid Type Single Solenoid Type HD 3 ******BWY D D4V TBH3BDW TBH3BDS HD 3 ******BWY D S D4V TBH3BDWS TBH3BDSS HD 3 ******BWY D T D4V TBH3BDWT TBH3BDST Spool types Type Spring enter No Spring Detent Spring Offset Model HD*3W* * WY* HD*WD** WY* HD*S* * WY* 3WBA WDBcA SBcA NOTE 9 3WBDA 3WBGA SKcP 3WAEB NOTE 8 NOTE 8: Spool type 3W-AEB is ville only for the HD3 nd HD series. NOTE 9: For spool types not shown ove, plese consult us. 6

3 Vlve performnce Opertion Limit (Dynmic Viscosity: 33 /sec) The performnce will vry slightly depending on the circuit conditions nd the opertion conditions (voltge, pressure, flow, viscosity, etc.). The flow rte vlue in the performnce grphs includes surge flow. HD B Series L/min 4 ircuit ylinder circuit A port locked B port locked Flow 3 3WBA 3WBDA 3WBGA WDBcA HD3B Series L/min 8 Flow HDB Series L/min8 Flow PressureMP PressureMP PressureMP SBcA SKcP ircuit 3WBA 3WBDA 3WBGA 3WAEB WDBcA SBcA SKcP ircuit 3WBA 3WBDA 3WBGA 3WAEB WDBcA ylinder circuit ylinder circuit A port locked A port locked B port locked B port locked SOLENOID VALVES / DIRETIONAL ONTROL VALVES SBcA L/min8 7 SKcP Flow PressureMP 7

4 Switching Response Time (Dynmic Viscosity: 33 /sec) The switching response time will vry slightly depending on the circuit conditions nd the opertion conditions (voltge, pressure, flow, viscosity, etc.). Series 3 Solenoid Signl Y* * Y*ABD Y*ST * Y* * Y*ABD Y*ST * 3.sec.sec.sec.sec.sec.sec.sec.sec 3.3sec.3sec.3sec.3sec.3sec.3sec.3sec.3sec 3 3.7sec.3sec.7sec.3sec.4sec.4sec.sec.sec.4sec.3sec.sec.8sec SOLENOID VALVES / DIRETIONAL ONTROL VALVES.9sec.sec.3sec.9sec.sec.sec Response time t turning ON ylinder displcement Solenoid signl.4sec.sec.sec.4sec.sec.8sec Response time t turning OFF 8

5 Internl Resistnce (Dynmic Viscosity: 33 /sec) HD B Series HD3/B Series MP. Internl resistnce FlowL/min MP3 Internl resistnce FlowL/min HD B Series Direction Of Flow PA or B A or BT PT HD3/B Series Direction Of Flow PA or B A or BT PT 3W WD S BDGccA KcP 3W WD S BDGA AEB BccA KcP SOLENOID VALVES / DIRETIONAL ONTROL VALVES 9

6 Outside dimensions Type B (Terminl ox type) 4-JIS B 4-BP9 Power indictor lmp SOLENOID VALVES / DIRETIONAL ONTROL VALVES Solenoid instlltion/removl dimension 38 Solenoid instlltion/removl dimension 37 Type (M-4 pin connector type) 4-JIS B 4-BP9 Wiring connector M. Solenoid instlltion/removl dimension 38 Solenoid instlltion/removl dimension 37.7 For the su-plte SHD**TA, refer to pge L-. SHD**T3A, refer to pge L-6.

7 SOLENOID VALVEHD*-WY* SIZE 3 Fetures HD3 Series (for MP) HD Series (for MP). ompct. Directly controllle y. High pressure nd lrge cpcity progrmmle controller 3. Incresed rted flow rte since the vlve opertes t low power. (Refer to the 4. Incresed permissile ck pressure solenoid chrcteristics).. Dust- nd wter-proof to IE IP6 6. Lmp nd grounding terminl re stndrd equipment. 7. Surge killer is stndrd equipment. Plese red the Operting Mnul utions on use crefully to ensure correct usge. Description of the model designtion Mx operting pressure : MP 3: MP Mounting olt No code: 3 type M8 olt (stndrd) S: 3 type M6 olt (option) Switching function 3W : Spring center type WD: No spring detent type S : Spring offset type Spool type Refer to the SPOOL TYPES tle. Nominl size onforming to ISO (M6 ot type only) Model code HDS WYD* HDS WYD*AD HDS WYD*SorT HDS WYR* HDS WYR*H HD3S WYD* HD3S WYD*SorT HD3S WYR* HD3S WYR*H NOTE : The vlve with quick return function provides fster response for switching to OFF Series selection tle Low-pressure Type High-pressure Type Series Power Source D A Low Voltge The piping must e rrnged so tht the R port is lwys filled with fluid to mke the most of the fetures of the oil-immersed type vlve. When instlling no-spring type vlve, instll it so s to set the spool horizontlly. Finish the mounting fces to the sme qulity s the vlve fces (3. mrz). Using vlve with the R port plugged cn cuse opertion filure. For vlves with detent, to hold the spool position without supplying power to the solenoid the ck pressure must e MP or lower for the HD3 series or MP or lower for the HD series. Where PL is connected directly, select type with the diode or M -4 pin connector type to protect the PL output crd. Option functions M-4 pin connector type (only for HD(S)-WYD type) A: Lod side OMMON right side B: Lod side OMMON left side : Lod side +OMMON right side D: Lod side +OMMON left side Quick return function (NOTE ) (only for HD-WYR*) H: Quick return With diode (only for HD*-WYD) S: Lod side -OMMON T: Lod side +OMMON Voltge indiction D: D 4 V R: A V R: A V Wiring method WY: le connection to the side of the terminl ox Surge Asorer M 4-pin onnector Quick Return R + Vristor Diode Diode Rectifier Rectifier R + Vristor Diode Rectifier Rectifier omptiility to DeviceNet (NOTE ) SOLENOID VALVES / DIRETIONAL ONTROL VALVES NOTE: Select the slve unit crefully since the solenoid current vlue is high.

8 Vlve specifictions SOLENOID VALVES / DIRETIONAL ONTROL VALVES Mx. operting pressure MP Mx. flow (NOTE 3) L/min Permissile ck pressure t T port (NOTE 4) MP Switching frequency YLE/s Permissile voltge vrition rnge Protection structure clss Hydrulic fluid clenliness Operting fluid (recommendtion) Viscosity /s Fluid temperture Amient temperture Tightening torque Series N m Mss NOTE 3: For detils, refer to the opertion limit. NOTE 4: Vlues in prentheses re for the detent type. Solenoid specifictions HD Series Solenoid model SLH3BD Rted voltge D4V Frequency Holding current.a Power consumption 4.8W Voltge vrition rnge Terminl ox Size 3B D type Solenoid HD 3 S ******3BWY D HD 3 S ******3BWY D S HD 3 S ******3BWY D T HDS ******3BWY D A HDS ******3BWY D B HDS ******3BWY D HDS ******3BWY D D Size 3B A type Solenoid HD R 3 S ******3BWY R HD R 3 S ******3BWY R H SLH3BR AV /6Hz.6A.8W ±%V SLH3BR AV /6Hz.3A 6.6W Rted Voltge D4V D4V D4V D4V D4V D4V D4V Rted Voltge AV AV AV AV HD HD3 6 6 or lower Rted voltge ±% V IE9 IP6 omplying with ISO8-lss NAS638-lss ISO VG346 to 4 to 6 to M6 to M83 to 3W, WD4.8S3. HD3 Series Solenoid model Rted voltge Frequency Holding current Power consumption Voltge vrition rnge SLH3BD D4V.A 36W SLH3BR AV /6Hz.46A 4W ±%V SLH3BR AV /6Hz.A 44W Terminl Box Doule Solenoid Type Single Solenoid Type TBH33BDW TBH33BDS TBH33BDWS TBH33BDSS TBH33BDWT TBH33BDST TBH33BDWA TBH33BDSA TBH33BDWB TBH33BDSB TBH33BDW TBH33BDS TBH33BDWD TBH33BDSD Doule Solenoid Type TBH33BRW TBH33BRWH Terminl Box Single Solenoid Type TBH33BRS TBH33BRSH Spool types Type Model Spring enter HD*3W**BWY* 3WBA No Spring Detent HD*WD**BWY* WDBcA Spring Offset HD*S**BWY* SBcA 3WBDA SKcP NOTE 6 3WBGA 3WAEB NOTE NOTE : Spool type 3W-AEB is ville only for the HD3 series. NOTE 6: For spool types not shown ove, plese consult us.

9 Vlve performnce Opertion Limit (Dynmic Viscosity: 33 /sec) The performnce will vry slightly depending on the circuit conditions nd the opertion conditions (voltge, pressure, flow, viscosity, etc.). 3B Series L/min 6 4 Flow PressureMP 33B Series L/min Flow PressureMP ircuit ylinder circuit A port locked B port locked 3WBA 3WBDA 3WBGA WDBcA SBcA SKcP NOTE: ( ): Indictes the opertion limit when used t the cylinder stroke end. ircuit ylinder circuit A port locked B port locked 3WBA 3WBDA 3WBGA 3WAEB WDBcA SBcA SKcP NOTE: ( ): Indictes the opertion limit when used t the cylinder stroke end. SOLENOID VALVES / DIRETIONAL ONTROL VALVES 3

10 3B Series 3 Solenoid Signl Y* * Y*ABD Y*ST * Y* * Y*ABD Y*ST * 3.9sec.6sec.9sec.3sec.4sec.sec.4sec.8sec 3.7sec.sec.7sec.sec.4sec.3sec.4sec.6sec 3 3.sec.6sec.sec.sec.sec.3sec.sec.sec.sec.sec.sec.sec SOLENOID VALVES / DIRETIONAL ONTROL VALVES.3sec.7sec.6sec.3sec.7sec.sec Response time t turning ON ylinder displcement Solenoid signl.6sec.4sec.4sec.6sec.4sec.6sec Response time t turning OFF 4

11 Internl Resistnce (Dynmic Viscosity: 33 /sec) 3B Series 33B Series MP.8 Internl resistnce 3B Series PA or B A or BT PT 33B Series PA or B A or BT PT.6.4. Direction Of Flow Direction Of Flow FlowL/min 3W 3W MP. Internl resistnce FlowL/min WD BDGccA KcP.. BDGA AEB BccA KcP WD S S SOLENOID VALVES / DIRETIONAL ONTROL VALVES

12 Outside dimensions Size 3 series 4JIS B 4BP Power indictor lmp Pin hole for mnul opertion SOLENOID VALVES / DIRETIONAL ONTROL VALVES (In the cse of M-4 pin connector) For the su-plte SHD3**TA, refer to pge L-. SHD3**T3, refer to pge L * Dimension in prentheses is for HD*S (M6). (In the cse of M-4 pin connector) Solenoid instlltion/removl dimension 43 Solenoid instlltion/removl dimension

13 onnecting method Terminl ox M-4 pin connector rrngement Power supply terminl [SOL ] (M3) Power supply terminl [SOL ] (M3) Lmp (SOL ) Lmp (SOL ) TOP Doule solenoid type Grounding terminl (M3) Short-circuit jumper Power supply common terminl (M3) BOTTOM Right tke-out Left tke-out Power supply terminl [SOL ] (M3) Lmp (SOL ) TOP Single solenoid Grounding terminl (M3) WYR(Rectifier Incorported type) (B, 3B Type) A Lmp With D M-4 Pin onnectorlod side OM (, 3B Type with M-4 Pin onnector) Output Unit (PNP) With D DiodeLod side OM (B-WYDS, 3B-WYDS Type) Power supply terminl [SOL ] (M3) BOTTOM 3B type Electric ircuit WYD(D Type) (B, 3B Type) D Lmp With D M-4 Pin onnectorlod side +OM (, 3B Type with M-4 Pin onnector) Output Unit (NPN) With D DiodeLod side +OM (B-WYDT, 3B-WYDT Type) SOLENOID VALVES / DIRETIONAL ONTROL VALVES D D Short-circuit jumper side Lmp Lmp Short-circuit jumper side 7

14 Pcking list (SPRING ENTER TYPE) OPTIONAL ONNETOR SOLENOID VALVES / DIRETIONAL ONTROL VALVES JIS B 4A P4 JIS B 4B P9 JIS B 4B P8 JIS B 4A P NOTE: ( ): The numer of s used in spring-offset type vlve type (M-4 pin connector type) does not need, nd. Size 3 Series * Figure shows B type. Size Series No. Prt No. Nme Q ty No. Prt No. Nme Q ty 4 JIS B 4A P S 4 S 6 AS689 4 No. Prt No. Nme Q ty No. Prt No. Nme Q ty JIS B 4A P4 JIS B 4B P JIS B 4B P8 JIS B 4A P JIS B 4A P3 AS689 4 NOTE: ( ): The numer of s used in spring-offset type vlve 8

15 Mounting olts Mounting olts re not supplied with vlves nd should e ordered seprtely. Since the mounting olt set height of new type vlves differs from tht of conventionl vlves, plese order the djusting collrs or mounting olts for new type vlve when replcing vlve in circuit where stck vlves re used. For the 3B series with M6 type mounting olts, plese order the mounting olts for new type vlve. ollr B Series Mounting Bolts for the HY-TEGRA System Hexgon socket hed olt Stud olt No. of Stck Levels Bolt Type No. of Stck Levels Bolt Type JIS B 76 M 3 HKSNA 6 HKSN 7 3 HKSNA 3 HKSN 6 4 HKSNA 3 4 HKSN 4 HKSNA 7 HKSN 76 Use mounting olts of the strength ctegory clss.9. Stud olts re supplied with nuts. 3 If n M6 type solenoid vlve is used for the 3B series, lso use n M6 type (H*3HS) HY-TEGRA vlve. omptiility with stndrds L X Series B 3B X 8 E All types of vlves in the ctlogs conform to E mrking directives. Directive: 73/3EE, 93/68/EE Low Voltge Directive (VDE 8:) For replcing conventionl vlve ollr model (for M) : HH- (4 olts) 3 (for M8) : HH-7 (4 olts) 3B Series Mounting Bolts for the HY-TEGRA System M6 hexgon socket hed olt M6 stud olt No. of Stck Levels Bolt Type No. of Stck Levels Bolt Type JIS B 76 M6 4 HKSNA6 9 HKSN6 6 3 HKSNA6 3 HKSN6 6 4 HKSNA6 4 HKSN6 6 HKSNA6 6 HKSN6 7 M8 hexgon socket hed olt M8 stud olt No. of Stck Levels Bolt Type No. of Stck Levels Bolt Type JIS B 76 M8 4 HKSNA8 9 HKSN8 6 3 HKSNA8 3 HKSN8 6 4 HKSNA8 4 HKSN8 6 HKSNA8 6 HKSN8 7 Unit: L 3 SOLENOID VALVES / DIRETIONAL ONTROL VALVES UL Plese consult us. 9

16 New nd previous solenoid vlve model comptiility tle SOLENOID VALVES / DIRETIONAL ONTROL VALVES Previous vlve model New vlve model Remrk HD***BWYD HD** 3B WYDA Equivlent to previous vlve Solenoid vlve (low pressure) HD** WYDB M 4-pin connector + Diode HD***AWYD HD** 3B WYD (ck electromotive force prevention) Lownoise solenoid vlve HD4***BD HD** 3B 3B WYDD Solenoid vlve (low pressure) HD***AWYA* HD***BWYDS HD***BWYDT HD***BWYR* HD***BWYR*H HDN**D HDN**DA With diode (ck electromotive force prevention) Equivlent to previous vlve Equivlent to previous vlve (quick return) Equivlent to previous vlve HDN**DB M 4-pin connector + Diode ompct solenoid vlve HDN**D (ck electromotive force prevention) HD4**AWY (D4V) HDN**DD ompct solenoid vlve HD4**AWY (A* V) HDN**DS HDN**DT HDN**A* HD***BWYR*H With diode (ck electromotive force prevention) Equivlent to previous vlve Equivlent to previous vlve (quick return) Lownoise, lowshock solenoid vlve HD**3D* R* Low power consumption type solenoid vlve HD3***ALYD Solenoid vlve (high pressure) HD3***AWYD Solenoid vlve (DIN terminl) HD3***AWDD Low power consumption type solenoid vlve HD3***ALYA* Solenoid vlve (high pressure) HD3***AWYA* Solenoid vlve (DIN terminl) HD3***AWDA* Solenoid vlve HD3***AWYR* Low power consumption type solenoid vlve HD34***ARF EHD3D*3AS* HD***BWYD HD** WYDA HD** 3B WYDB HD** 3B WYD HD** 3B 3BWYDD HD***BWYDS HD***BWYDT HD3***BWYD HD3***BWYDS HD3***BWYDT HD***BWYR* HD***BWYR*H HD3***BWYR* HD3***BWYR*H HD***BWYR* HD3***BWYR* hnged to current control type Plese consult us. For mximum operting pressure of MP or lower For mximum operting pressure higher thn MP For mximum operting pressure of MP or lower For mximum operting pressure higher thn MP For mximum operting pressure of MP or lower For mximum operting pressure higher thn MP Equivlent to previous vlve M 4-pin connector + Diode (ck electromotive force prevention) With diode (ck electromotive force prevention) Equivlent to previous vlve With diode (ck electromotive force prevention) Equivlent to previous vlve Equivlent to previous vlve Equivlent to previous vlve Equivlent to previous vlve Lownoise, lowshock solenoid vlve HD3***D* R* EHD3AD*3AS* hnged to current control type Plese consult us. Solenoid vlve (low pressure) HD** D HD** D M 4-pin connector + Diode (ck electromotive force prevention)