Kit Description. to 3 / 4. VG7xxxxT Two- and Three-Way Globe Valves. VG7xxxxS, VG7xxxxT, and VTM Twoand Three-way Globe Valves / 4
|
|
|
- Chad Michael Moody
- 5 years ago
- Views:
Transcription
1 AV-800 Series Competitive Gloe Vlve Adpters AV-8xx Series Adpter Kits Schneider Electric AV-8xx Series Adpter Kits mount on the onnet of competitors vlves to llow replcement of the ctutor with n pproprite Schneider Electric pneumtic, Fort or Smrt Actutor. The replcement Schneider Electric ctutor is then instlled using its stndrd mounting procedure nd hrdwre. Actutors with integrl linkges, such s Schneider Electric Smrt Actutor Mx51-710x (105 l-f), mount directly on the Schneider Electric dpter. Other ctutors, such s the MK-2690 (6 in 2 ) pneumtic ctutor, use their stndrd linkge kit (e.g. MK-2690 uses the AV-7400 for vlves with 1 / 2 of stroke). AV-802 Adpter on Johnson Controls Gloe Vlve Kit Prt Numer Kit Description Literture F Numer AV-801 AV-802 AV-803 AV-810 AV-811 AV-812 AV-814 AV-815 AV-816 AV-817 AV-7800 Adpter Kit for Johnson Controls 1 / 2 to 3 / 4 VG7xxxxT Two- nd Three-Wy Gloe Vlves Adpter Kit for Johnson Controls 1 / 2 to 3 / 4 VG7xxxxS, VG7xxxxT, nd VTM Twond Three-wy Gloe Vlves Adpter Kit for Johnson Controls 1 / 2 to 2 VG7xxxxx, VB-3754, VB-3974, VB- 4322, nd VB-4324 Two- nd Three-Wy Gloe Vlves Adpter Kit for Honeywell 1 / 2 to 3 V5011, V5011F, V5011G, V5011N, V5013, V5013F, V5013G, nd V5013N Two- nd Three-Wy Gloe Vlves Adpter Kit for osolete Brer-Colmn VB-9000 Series 1/2 to 2 Two- nd Three-Wy Bronze Gloe Vlves Adpter Kit for VB-8000 nd osolete Brer-Colmn VB-9000 Series 2-1/2 to 6 Two- nd Three-Wy Iron Flnged Gloe Vlves Adpter Kit for Siemens xx Flowrite Series 1 / 2 to 2 Two- nd Three- Wy Gloe Vlves Adpter Kit for Siemens xx or xx Powertop Series 1 / 2 to 1 1 / 4 Two- nd Three-Wy Gloe Vlves Adpter Kit for Siemens (Lndis & Gyr/Powers ) 591-6xxx nd 591-7xxx 1 / 2 nd 3 / 4 Two-Wy nd 1 1 / 4 to 2 Three-Wy Gloe Vlves Adpter Kit for Roertshw, V61xx, V62xx, V63xx, V64xx, V65xx, V66xx, V67xx, V68xx, V69xx,V2566, V2567, V / 2 to 2 Gloe Vlves Pneumtic Actutor Linkge Kit for MK-2690 to provide 3 / 4 stroke for competitive gloe vlves (requires AV-801, AV-802, AV-803, AV-815, or AV-816 ordered seprtely). F F F F F F F F F F F F My 2014
2 Applicle Literture AK Pneumtic Positive Positioner Rely Generl Instructions, F AV-401 Vlve Linkge Kit for MK-4601, MK-4611, MK4621 Pneumtic Actutors Generl Instructions, F AV-430 Vlve Linkge for MK-66x1, MK-68x1, MK-6911 Pneumtic Actutors Generl Instructions, F AV-7400 Pneumtic Actutor Linkge Kit for MK-2690 nd 1 / 2 Stroke Vlves Generl Instructions, F AV-7800 Pneumtic Actutor Linkge Kit for MK-2690 nd 3 / 4 Stroke Vlves Generl Instructions, F MK-2690 Pneumtic Vlve Actutor Generl Instructions, F MK-46xx Series Pneumtic Vlve Actutors Generl Instructions, F MK-6600 Series, MK-6800 Series, nd MK-6911 Pneumtic Vlve Actutors Generl Instructions, F Mx51-710x Two-Position, Floting, nd Proportionl Smrt Actutors Generl Instructions, F Mx51-720x Two-Position, Floting, nd Proportionl Smrt Actutors Generl Instructions, F Fort M400A(-VB)/M800A(-VB)/M1500A(-VB) Non-Spring Return Actutors Generl Instructions, F Pneumtic Products Ctlog, F Electric-Electronic Products Ctlog, F Vlves Ctlog, F Selection Guide Contents AV-8xx Adpter Kit Selection Procedure...pge 2 AV-800 Series Appliction Overview...pge 3 AV-800 Series Adpter Instlltion Considertions...pge 4 Johnson Controls Adpter Appliction Reference...pge 5 Honeywell Adpter Appliction Reference...pge 8 Siemens (Lndis & Gyr, Powers) Adpter Appliction Reference...pge 11 Roertshw Adpter Appliction Reference...pge 14 AV-8xx Adpter Kit Selection Procedure e: Be sure to consult AV-800 Series Adpter Instlltion Considertions on pge 4 efore proceeding. 1. Determine the mnufcturer, prt numer, size, nd stroke of the competitive vlve ody. 2. Determine the type of ctutor required (e.g. pneumtic, electric two-position, electric floting, electric proportionl), the required supply voltge (if electric), nd the desired input control signl to the ctutor. Also note ny physicl size nd close-off pressure constrints when selecting n ctutor/linkge. 3. Consult the pproprite section of this selection guide to determine the required AV-8xx kit numer, comptile Schneider Electric ctutor prt numer, nd Schneider Electric ctutor linkge (if needed). Cution: Only the Schneider Electric ctutors listed in this selection guide my e used. F My 2014
3 AV-800 Series Appliction Overview 3 Vlve Adpter Vlve Mnufcturer Vlve Size Vlve Stroke Schneider Electric Approved Actutors Additionl Linkge Required AV-801 AV-802 VG7xxxCT, ET, GT, LT VG7xxxCT, ET, GT, LT, CS, ES, GS, LS VTM-xxxxx 1/2, 3/4 5/16 MK-2690 Mx51-710x MK-2690 Mx51-710x AV-7400 c Included c AV-7400 c Included c Johnson Controls MK-2690 AV-7400 AV-7800 AV-803 VG7xxxC, E, G, L, N, P, R, or S followed y T or S VB-3754, VB-3974, VB-4324, VB /2 to 2 Up to 3/4 1 to 2 3/8 or greter Mx51-710x Mx51-720x M400A, M800A, M1500A M400A-VB, M800A-VB, M1500A-VB Included c Included d AV-811 Included MK-2690 AV-7800 d AV-810 Honeywell V501xx 1/2 to 3 3/4 Mx51-720x M400A(-VB), M800A(-VB), M1500A(-VB) Mx51-710x Included d Included Included AV-811 1/2 to 2 1/2, 1 Mx51-720x Included f Brer- Colmn Osoleted VB-9000 Series M400A(-VB), M800A(-VB), M1500A Included f AV /2 to 3 1, 2 Mx51-720x M800A(-VB), M1500A(-VB) MK-2690 Included Included AV-7800 d AV xxx 2xx-03xxx 1/2 to 2 3/4 Mx51-720x M400A-VB, M800A-VB, M1500A-VB Included d Included M400A, M800A, M1500A Included g AV xxx 1/2 to 1-1/4 1/2 MK-2690 Mx51-710x AV-7400 c Included c Siemens M400A(-VB), M800A(-VB) MK-2690 AV-7400 c AV xxx 591-7xxx 3/4 to 1 two-wy 1-1/4 to 2 three-wy 3/4 for xx 1/2 & 3/4 two-wy 5/16 for 1-1/4 to xx three-wy MK-2690 MK-46x1 MK-68x1 Mx51-710x AV-7800 d AV-401 c AV-430 Included c Mx51-720x Included d M400A(-VB), M800A(-VB) e Included AV-817 Roertshw V610x, V6200, V6300, V6400V6501, V6600 (V2566), V6700 (V2567), V6800 (V2568), V6900 1/2 to 2 3/8 nd 5/8 MK-46xx, MK-66xx, MK-68xx Mx51-710x, Mx M400A(-VB), M800A(-VB), M1500A(-VB) AV-401 c AV-430 i Included Included For finl vlve ctutor selection, refer to ctutor comptiility tles on pges six through sixteen. Linkge included in ctutor c For up to 1/2 vlve stroke. d For 3/4 vlve stroke. e 3/8 stroke or greter. Do not use Schneider Electric Fort ctutors on vlves with less thn 3/8 stroke. f Additionl linkge my e required for some older osolete 1-1/2 nd 2 VB-9xxx vlves. See F (AV-608) for further detils. g No dditionl dpter required. Direct mount. AV-814 not required. h No seprte linkge required. i For up to 1 stroke F My 2014
4 AV-800 Series Adpter Instlltion Considertions 1. Schneider Electric ctutor nd dpter dimensions my need to e checked to ssure proper clernces re mintined. 2. The replcement ctutor nd dpter listed represent wht Schneider Electric elieves re n equivlent. Actutors do not necessrily hve the sme physicl size, rnge, wire codes, termintions, electricl rtings, etc. s the originl ctutor. The emphsis hs een plced on providing replcement ctutor of similr specifictions to meet the vlve nd system requirements. The user must determine the sustitution cceptility y reviewing the vlve specifictions, ctutor specifictions, nd the ppliction. When n ctutor is replced, mke sure tht the cpcity of the replcement unit will meet the requirements of the vlve it is eing mounted on nd the system in which it is eing used. 4 Cution: For proper opertion, mke sure the stroke of the selected Schneider Electric ctutor is equl to or greter thn tht of the competitive vlve. 3. Schneider Electric ssumes no responsiility for gurnteeing the cceptility of ny suggested replcements. The suggestions contined herein should only e used s guide. 4. Consult the vlve mnufcturer if the system pressures or tempertures re eing chnged to ssure proper performnce. 5. Pneumtic ctutor close-offs re sed on 20 psig to the ctutor diphrgm 6. All specified close-offs re nominl, nd cn vry sed on the ge of the vlve, tightness of the stem pcking, nd vritions in stem drg F My 2014
5 Johnson Controls Adpter Appliction Reference 5 Comptile Johnson Controls Bronze Gloe Vlves Comptile Johnson Controls Two- nd Three-Wy Gloe Vlves VG7xxxCT 1 / 2 VG7xxxET 1 / 2 VG7xxxGT 1 / 2 VG7xxxLT 3 / 4 VTM-Axxxx-xxx 1 / 2 VTM-Gxxxx-xxx 1 / 2 VTM-Txxxx-xxx 1 / 2 VTM-Uxxxx-xxx 1 / 2 VTM-xxxx-xxx 3 / 4 AV-801 AV-802 AV-803 VG7xxxCS 1 / 2 VG7xxxES 1 / 2 VG7xxxGS 1 / 2 VG7xxxLS 3 / 4 VG7xxxCT 1 / 2 VG7xxxET 1 / 2 VG7xxxGT 1 / 2 VG7xxxLT 3 / 4 VG7xxxNT 1 VG7PT 1-1 / 4 VG7RT 1-1 / 2 VG7xxxST 2 VG7xxxCS 1 / 2 VG7xxxES 1 / 2 VG7xxxGS 1 / 2 VG7xxxLS 3 / 4 VG7xxxNS 1 VG7xxxPS 1-1 / 4 VG7xxxRS 1-1 / 2 VG7xxxSS 2 VB / 2 to 2 VB / 2 to 2 VB / 2 to 2 VB / 2 to 2 The xxx chrcters in the prt numer field denote vrious ody types, end connections, trim, nd flow chrcteristics. Schneider Electric Actutors Refer to the following tles in this section for complete ctutor informtion. Only use the Schneider Electric ctutors shown in this selection guide for the specific vlve, linkge, nd ctutor comintion. F My 2014
6 AV-801/AV-802 Actutor, Linkge, nd Close-off Informtion for 1/2 nd 3/4 Two- nd Three-Wy Johnson Controls Vlves with Schneider Electric Spring Return Actutors 6 Johnson Controls Vlve Actutor MK-2690 Mx51-710x Additionl Linkge AV-7400 Included Vlve Stroke 5/16 5/16 5/16 5/16 Spring Rnge 3-7 psig 5-10 psig 8-13 psig 1 / 2 Normlly Open 220 c 170 c 90 c 250 VG7xxxxx VTM-xxxxx 3 / 4 Normlly Open 130 c 120 c 60 c / 2 Normlly Closed / 4 Normlly Closed Linkge included in ctutor. Pneumticlly-ctuted vlves with less thn 1/2 stroke my require you to djust the throttling rnge of the controller to otin good proportionl control. c 20 psig supply ir pressure. e: Do not use Schneider Electric Fort ctutors with Johnson Controls 1/2 nd 3/4 VG7xxxxx nd VTM-xxxxx vlve odies (insufficient vlve stroke). AV-803 Actutor, Linkge, nd Close-off Informtion for 1/2 nd 3/4 Two- nd Three- Wy Johnson Controls Vlves with Schneider Electric Spring Return Actutors Johnson Controls Vlve Actutor MK-2690 Mx51-710x Additionl Linkge AV-7400 Vlve Stroke 5/16 5/16 5/16 5/16 Spring Rnge 3-7 psig 5-10 psig 8-13 psig 1 / 2 Normlly Open c 90 c 250 VG7xxxxx 3 / 4 Normlly Open 130 c 120 c 60 c / 2 Normlly Closed / 4 Normlly Closed No seprte linkge required. Pneumticlly-ctuted vlves with less thn 1/2 stroke my require you to djust the throttling rnge of the controller to otin good proportionl control. c 20 psig supply ir pressure. For three-wy vlves, use the lowest pulished close-off pressure (normlly open or normlly closed) for the ctutor selected. e: Do not use Schneider Electric Fort ctutors with Johnson Controls 1/2 nd 3/4 VG7xxxxx vlve odies (insufficient vlve stroke). F My 2014
7 AV-803 Actutor, Linkge, nd Close-off Informtion for 1 Through 2 Two- nd Threewy Johnson Controls Vlves [Schneider Electric Pneumtic nd Smrt Actutors (Spring Return)] 7 Actutor MK-2690 Mx51-710x MK-6801 MK-6811 MK-6821 Mx51-720x Johnson Controls Vlve Additionl Linkge AV-7400 Included AV-430 Included Vlve Stroke 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 Spring Rnge 3-7 psig 5-10 psig 8-13 psig 3-8 psig 5-10 psig 8-13 psig 1 Normlly Open 70 c 50 c 25 c c 250 c 250 c /4 Normlly Open 40 c 30 c 15 c 90 c 250 c 250 c 250 c /2 Normlly Open 29 c 20 c 9 c 250 c 230 c 160 c 100 VG7xxxxx VB-3754 VB-3974 VB-4322 VB Normlly Open 1 Normlly Closed 160 c 120 c 90 c /4 Normlly Closed 1-1/2 Normlly Closed 2 Normlly Closed Linkge included in ctutor. 1 nd 1-1/4 Johnson vlves tht hve 3/8 di stems nd 1/4 28 threds cn e used with Mx51-720x ctutors. Do not use these ctutors on 1/4 di stem Johnson vlves. c 20 psig supply ir pressure. For three-wy vlves, use the lowest pulished close-off pressure (normlly open or normlly closed) for the ctutor selected. AV-803 Actutor, Linkge, nd Close-off Informtion for 1 Through 2 Two- nd Three- Wy Johnson Controls Vlves (Schneider Electric Fort Non-Spring Return Actutors) Johnson Controls Vlve VG7xxxxx VB-3754 VB-3974 VB-4322 VB-4324 Actutor M400A (-VB) M800A (-VB) M1500A (-VB) Additionl Linkge Vlve Stroke AV-811 for M400A, M800A, M1500A Included for M400A-VB, M800A-VB, M1500A-VB 3/ / / F My 2014
8 Honeywell Adpter Appliction Reference Schneider Electric Actutors Refer to tle elow for complete ctutor informtion. Only use the Schneider Electric ctutors shown in this selection guide for the specific vlve, linkge, nd ctutor comintion. AV-810 Actutor, Linkge, nd Close-Off Informtion for Two-nd Three-Wy Honeywell Vlves [Schneider Electric Pneumtic nd Smrt Actutors (Spring Return)] Actutor MK-2690 MK-6801 MK-6811 MK-6821 Mx51-720x 8 Honeywell Vlve Additionl Linkge AV-7800 AV-430 Included Vlve Stroke 3/4 3/4 3/4 3/4 3/4 3/4 3/4 Spring Rnge 3-7 psig 5-10 psig 7-12 psig 3-8 psig 5-10 psig 8-13 psig 1/2 Normlly Open 220 c 170 c 90 c 250 3/4 Normlly Open 130 c 120 c 60 c 250 c 250 c 250 c Normlly Open 70 c 50 c 25 c 250 c 250 c 250 c /4 Normlly Open 40 c 30 c 15 c 250 c 150 c 150 c /2 Normlly Open 29 c 20 c 9 c 250 c 230 c 160 c 100 V5011 V5011F V5011G V5011N V5013 V5013F V5013G V5013N 1-1/4 Normlly Closed /2 Normlly Closed Normlly Open 160 c 120 c 90 c /2 Normlly Open Recommendemendemended Recom- Recom- 110 c 80 c 50 c 35 3 Normlly Open 70 c 60 c 40 c 25 1/2 Normlly Closed Recommendemendemended Recom- Recom- 3/4 Normlly Closed Normlly Closed Normlly Closed Recommendemended Recom- 2-1/2 Normlly Closed Normlly Closed For three-wy vlves, use the lowest pulished close-off pressure (normlly open or normlly closed) for the ctutor selected. Linkge included in ctutor. c 20 psig supply ir pressure. AV-810 Actutor, Linkge, nd Close-Off Informtion for Two-nd Three-Wy Honeywell Vlves (Schneider Electric Fort Non-Spring Return Actutors) Honeywell Vlve Actutor M400A (-VB) M800A (-VB) M1500A (-VB) Additionl Linkge Vlve Stroke 3/4 1/ V5011 V5011F V5011G V5011N V5013 V5013F V5013G 3/ /4 1-1/ V5013N 2-1/ No seprte linkge required. F My 2014
9 Brer-Colmn Adpter Appliction Reference 9 Schneider Electric Actutors Refer to tle elow for complete ctutor informtion. Only use the Schneider Electric ctutors shown in this selection guide for the specific vlve, linkge, nd ctutor comintion. AV-811/AV-812 Actutor, Linkge, nd Close-Off Informtion for Two-nd Three-Wy Osoleted VB-9xxx Brer-Colmn Vlves [Schneider Electric Smrt Actutors (Spring Return)] Brer-Colmn Vlve Two-Wy VB-92xx Three-Wy Mixing VB-9313 Three-Wy Diverting VB-9323 Actutor Mx51-710x Mx51-720x Mx61-720x Additionl Linkge Included Included Included NC or NO NO NC NO NC NO NC 1/ / / / / / / / Vlve Stroke Two-Wy 7/16 Three-Wy 3/8 7/8 3/8 1-1/ For three-wy mixing vlves, use the lowest pulished close-off pressure (normlly open or normlly closed) for the ctutor selected. Consult F (AM-73x). Older osolete 1-1/2 nd 2 VB-9xxx Vlves will require dditionl linkge. 7/8 F My 2014
10 AV-811/AV-812 Actutor, Linkge, nd Close-Off Informtion for Two-nd Three-Wy Brer-Colmn VB-9xxx Vlves (Schneider Electric Fort Non-Spring Return Actutors) 10 Brer- Colmn Vlve Actutor M400A M400A-VB M800A M800A-VB M1500A M1500A-VB Linkge AV-811 Included AV-811 Included AV-811 Included 1/ / / Vlve Stroke Two-Wy 7/16 Three-Wy 3/8 Two-Wy VB-92xx Three-Wy Mixing VB / / Linkge AV-812 AV-812 Vlve Stroke 2-1/ / Linkge AV-811 Included AV-811 Included Vlve Stroke 1/ Three-Wy Diverting VB / / / /8 7/8 Additionl linkge my e required for older osolete 1-1/2 nd 2 VB-9xxx vlves. See F (AV-608) for further detils. F My 2014
11 Siemens (Lndis & Gyr, Powers) Adpter Appliction Reference 11 Comptile Siemens Bronze Gloe Vlves Comptile Siemens Two- nd Three-Wy Gloe Vlves xxx 1 / 2-2 2xx-03xxx 1 / xx 1 / 2-1-1/ xx 1 / 2-1-1/ xxx 1 / xxx 3 / 4-1 AV-814 AV-815 AV-816 e: Schneider Electric Fort ctutors require no dditionl dpters to mount on Siemens 599 Series vlves (AV-81x not required). Schneider Electric Actutors Refer to the following tles in this section for complete ctutor informtion. Only use the Schneider Electric ctutors shown in this selection guide for the specific vlve, linkge, nd ctutor comintion. AV-814 Actutor, Linkge, nd Close-Off Informtion for Two- nd Three-Wy Siemens Vlves [Schneider Electric Pneumtic nd Smrt Actutors (Spring Return)] Actutor MK-2690 MK-6801 MK-6811 MK-6821 Mx51-720x Siemens Vlve Additionl Linkge AV-7800 AV-430 Included Vlve Stroke 3/4 3/4 3/4 3/4 3/4 3/4 3/4 Spring Rnge 3-7 psig 5-10 psig 7-12 psig 3-8 psig 5-10 psig 8-13 psig 1/2 Normlly Open /4 Normlly Open Normlly Open /4 Normlly Open /2 Normlly Open xxx 2xx-03xxx 2 Normlly Open Normlly Closed /4 Normlly Closed /2 Normlly Closed Recommendemendemended Recom- Recom- 3/4 Normlly Closed /2 Normlly Closed Normlly Closed recommended Linkge included in ctutor. 20 psig supply ir pressure. F My 2014
12 AV-814 Actutor, Linkge, nd Close-Off Informtion for Two- nd Three-Wy Siemens Vlves (Schneider Electric Fort Non-Spring Return Actutors) 12 e: AV-814 Adpter not required on Mxx00A. Tll Schneider Electric Fort ctutors mount directly on Siemens 599 Series vlves. Siemens Vlve Actutor M400A (-VB) M800A (-VB) M1500A (-VB) Vlve Stroke 3/ xxx 2xx-03xxx 1/ / / / AV-814 Adpter not required on Mxx00A. Tll Schneider Electric Fort ctutors mount directly on Siemens 599 Series vlves. AV-815 Actutor, Linkge, nd Close-Off Informtion for Two- nd Three-Wy Siemens Vlves [Schneider Electric Pneumtic nd Smrt Actutors (Spring Return)] Actutor MK-2690 MK-4601 MK-4611 MK-4621 Mx51-710x Mx51-720x Siemens Vlve Additionl Linkge AV-7400 AV-401 Included Included Vlve Stroke 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Spring Rnge 3-7 psig 5-10 psig 8-13 psig 3-6 psig 5-10 psig psig 1/2 Normlly Open /4 Normlly Open Normlly Open /4 Normlly Open xx xx 1/2 Normlly Closed /4 Normlly Closed Normlly Closed /4 Normlly Closed Linkge included in ctutor. 20 psig supply ir pressure. For three-wy vlves, use the lowest pulished close-off pressure (normlly open or normlly closed) for the ctutor selected. F My 2014
13 AV-815 Actutor, Linkge, nd Close-Off Informtion for Two- nd Three-Wy Siemens Vlves (Schneider Electric Fort Non-Spring Return Actutors) 13 Siemens Vlve Actutor M400A (-VB) M800A (-VB) M1500A (-VB) Additionl Linkge Vlve Stroke 1/ xx xx No seprte linkge required. 1/ / / AV-816 Actutor, Linkge nd Close-Off Informtion for 3/4 nd 1 Two-Wy Siemens Vlves [Schneider Electric Pneumtic nd Smrt Actutors (Spring Return)] Actutor MK-2690 MK-6801 MK-6811 MK-6821 Mx51-720x Siemens Vlve Additionl Linkge AV-7800 AV-430 Included Vlve Stroke 3/4 3/4 3/4 3/4 3/4 3/4 3/4 Spring Rnge 3-7 psig 5-10 psig 7-12 psig 3-8 psig 5-10 psig 8-13 psig 3/4 Normlly Open xxx 591-7xxx 1 Normlly Open Two-Wy 3/4 Normlly Closed Linkge included in ctutor. 20 psig supply ir pressure. 1 Normlly Closed AV-816 Actutor, Linkge nd Close-Off Informtion for 3/4 nd 1 Two-Wy Siemens Vlves (Schneider Electric Fort Spring Return Actutors) Siemens Vlve Actutor M400A (-VB) M800A (-VB) M1500A (-VB) Additionl Linkge Vlve Stroke 3/ xxx No dditionl 591-7xxxlinkge required. Two-Wy 1/ / F My 2014
14 AV-816 Actutor, Linkge nd Close-Off Informtion for 1 1 / 4 through 2 Three-Wy Siemens Vlves [Schneider Electric Pneumtic nd Smrt Actutors (Spring Return)] 14 Actutor MK-2690 MK-4601 MK-4611 MK-4621 MK-6601 MK-6611 MK-6621 Mx51-710x Siemens Vlve Additionl Linkge Vlve Stroke AV-7400 AV-401 AV-430 Included 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 Spring Rnge 3-7 psig 5-10 psig 8-13 psig 3-6 psig 5-10 psig psig 3-8 psig 5-10 psig 8-13 psig xx Three-Wy 1-1/4 15 c 90 c 60 c 40 c 60 c 120 c 200 c /2 40 c 80 c 180 c c 50 c 90 c 20 Linkge included in ctutor. Pneumticlly-ctuted vlves with less thn 1/2 stroke my require you to djust the throttling rnge of the controller to otin good proportionl control. c 20 psig supply ir pressure. e: Do not use Schneider Electric Fort ctutors with Siemens x three-wy vlve odies (insufficient vlve stroke). Roertshw Adpter Appliction Reference Comptile Roertshw Bronze Gloe Vlves Comptile Roertshw Two- nd Three-Wy Gloe Vlves V61xx, V62xx, V64xx, V65xx, V67xx 1 / 2 to 2 Two-Wy V63xx, V66xx 1 / 2 to 2 Three-Wy V68xx 1 / 2 to 2 Two-Wy V / 2 to 2 (Uni-Line ) Three-Wy V / 2 to 2 (Uni-Line) Two-Wy V / 2 to 2 (Uni-Line) Two-Wy AV-817 Check vlve stroke to determine which tle elow to consult for ctutor, linkge, nd close-off informtion Schneider Electric Actutors Refer to tle on following pge for complete ctutor informtion. Only use the Schneider Electric ctutors shown in this selection guide for the specific vlve, linkge, nd ctutor comintion. F My 2014
15 15 AV-817 Actutor, Linkge, nd Close-Off Informtion for 1/2 through 1-1/2 Roertshw 3/8 Stroke Vlves [Schneider Electric Pneumtic nd Smrt Actutors (Spring Return)] Actutor MK-4601 MK-4611 MK-4621 MK-6601 MK-6611 MK-6621 Mx51-710x Roertshw Vlve Additionl Linkge AV-401 AV-430 Included Vlve Stroke 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Spring Rnge 3-6 psig 5-10 psig psig 3-8 psig 5-10 psig 8-13 psig 1/2 Normlly Open /8 Normlly Open recommended 3/4 Normlly Open V6100 V6101 V6102 V6200 V6300 V6400 V6501 V6600 V6700 V6800 V6900 7/8 Normlly Open Normlly Open /4 Normlly Open /2 Normlly Open recommended /2 Normlly Closed /8 Normlly Closed recommended 200 3/4 Normlly Closed /8 Normlly Closed Normlly Closed /4 Normlly Closed /2 Normlly Closed recommended Linkge included in ctutor. 20 psig supply ir pressure. For three-wy vlves, use the lowest pulished close-off pressure (normlly open or normlly closed) for the ctutor selected. AV-817 Actutor, Linkge, nd Close-Off Informtion for 1/2 through 1-1/2 Roertshw 3/8 Stroke Vlves (Schneider Electric Fort Non- Spring Return Actutors) Roertshw Vlve Actutor M400A (-VB) M800A (-VB) M1500A (-VB) Additionl Linkge Vlve Stroke 3/8 1/ V6100 V6102 V6300 V6501 V6700 V6900 V6101 V6200 V6400 V6600 V6800 5/ / / / No seprte linkge required. 1-1/ F My 2014
16 AV-817 Actutor, Linkge, nd Close-Off Informtion for 1 through 2 Roertshw 5/8 Stroke Vlves [Schneider Electric Pneumtic nd Smrt Actutors (Spring Return)] Actutor MK-6801 MK-6811 MK-6821 Mx51-720x Roertshw Vlve Additionl Linkge AV-430 Included Vlve Stroke 5/8 5/8 5/8 5/8 Spring Rnge 3-8 psig 5-10 psig 8-13 psig 1 Normlly Open /4 Normlly Open V6600 V6700 V /2 Normlly Open Normlly Open Normlly Closed /4 Normlly Closed /2 Normlly Closed Normlly Closed Linkge included in ctutor. 20 psig supply ir pressure. AV-817 Actutor, Linkge, nd Close-Off Informtion for 1 through 2 Roertshw 5/8 Stroke Vlves (Schneider Electric Fort Non-Spring Return Actutors) Roertshw Vlve Actutor M400A (-VB) M800A (-VB) M1500A (-VB) Linkge Vlve Stroke 5/8 V6600 V6700 V6800 No seprte linkge required / / Schneider Electric. All rights reserved. F My 2014
Kit Description. Adapter Kit for Johnson Controls 1 / 2 to 2 VG7xxxxx, VB-3754, VB-3974, VB-4322, and VB-4324 Two- and Three-Way Globe Valves
Selection Guide TAC 1354 Clifford Avenue P. O. Box 2940 Loves Prk, IL 61132-2940 www.tc.com AV-8xx Series Competitive Gloe Adpters AV-8xx Series Adpter Kits TAC AV-8xx Series Adpter Kits mount on the onnet
VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4
Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt
3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators
3-Wy Bll Vlve Assemblies Using TAC DurDrive Actutors Note: All vlve sizes ANSI Clss IV (0.01% of C v ) shut off, piped coil-side outlet to A. Tble-5 Selection Chrt3-Wy Mixing Bll Vlve Assemblies with TAC
Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
Data Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
Application Examples of Air-piloted Valves
ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht
Spring Return DuraDrive Two-Position Actuator
MA40-704x Series, MA4-707x Series, nd MA4-75x Series Spring Return DurDrive Two-Position Actutor For spring return pplictions tht require twoposition control of dmpers nd vlves in HVAC system. Fetures:
DC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor
Huell Industril Controls, Inc. 716 1600 Ampere 1500 Volt DC Contctor Ctlog 42716 Mrch 2013, Replces Septemer 2005 42716 Highlights Non-polrized rc chute (series lowout coil) design s stndrd Optionl polrized
4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
Directional Control Valves. General Description. Features. Specifications
echnicl Informtion Generl Description directionl control vlves re high performnce, 5-chmer, direct operted, wet rmture, solenoid controlled, 3 or 4-wy vlves. hey re ville in 2 or 3-position nd conform
Two-Position Electric Duplex Room Thermostats
TC-xx Series, TC-xx Series, TF- Series Two-Position Electric Duplex Room Thermostts These thermostts provide on-off control of heting/cooling systems. Fetures: Seprte units for C nd F. All units except
DSE /116 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 90 l/min
83 2/116 ED DIRECIONL VLVE WIH ROORIONL CONROL SULE MOUNING ISO 41-05 p mx 320 r Q mx l/min MOUNING INERFCE OERING RINCILE ISO 41-05-04-0-05 (CEO 4.2-4-05-320) 21.4 6.3 16.7 3.2 54.8 37.3 27 46 32.5 ø
RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
Specifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits
PowerMte Fetures nd Benefits Type P Cle Lockout Complint Specifile Fetures Lockout Plug Sfety Insultor Dimond Clmp Split Pin Contcts Type P Cle Comptile with ll UL 686 listed plugs nd receptcles. 2 3 4
2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009
Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009
SMP-BC Mixproof Valve
. kythe Proven Mixproof Rnge SMP-BC Mixproof Vlve Concept SMP-BC is snitry pneumtic set vlve, designed for sfety nd lek detection when two different products flow through only one vlve. The vlve is often
Solenoid Pilot Operated Directional Control Valve
Solenoid ilot Operted Directionl Control Vlve Nomenclture 1 pplicle fluid code No designtion: etroleum-sed hydrulic fluid H: Wter-glycol hydrulic fluid F: hosphte ester hydrulic fluid 2 3 Model No. ME:
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS
L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
FRONT SIDE FIX WINDOW
WINSHIEL/WINOWGLSS/MIRROR FRONT SIE FIX WINOW REPLEMENT FRONT SIE FIX WINOW The instlltion procedures re the removl procedures in reverse order. However, only instlltion procedures requiring dditionl informtion
Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION
L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl
SOLENOID VALVES / DIRECTIONAL CONTROL VALVES
SOLENOID VALVEHD*-WY* SIZE Fetures HD3 Series (for MP) HD Series (for MP). ompct. Directly controllle y. High pressure nd lrge cpcity progrmmle controller 3. Incresed rted flow rte since the vlve opertes
152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:
2mm ") DI. POINT TO POINT SYSTEM PVC OR STEEL SYSTEM L84 CLL -800--600 TYPE I ND TYPE II OVERHED UNITS 4 6 ") ( 8 ") 6 8 ") ( -0 PLN VIEW 20 (8 28 8 ") ( 8 ") 4 ( -4") 2 (4 ( 8 ") 28 ( 8 ") THE TYPE I
Decor Radiators Baseboard
Decor Rditors Bsebord Pedestl 11 (with fins) Avilble in outputs from 1,561 to 10,282 Btu/hr; 2, nd 4 tubes high. 28 (igh Output, with fins) Avilble in outputs from 5,05 to 19,552 Btu/hr; 2 nd 4 tubes high.
FUEL SYSTEM. Table of Contents. Section 3B - Carburetors
Tle of Contents FUEL SYSTEM Section 3B - Cruretors CARBURETORS Fuel System - Trouleshooting.............. 3B-2 Generl Informtion.................... 3B-2 Attenutor And Cr Throttle Levers......... 3B-4
Roller and ball bars for easy and safe die change
Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension
4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts
MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions
Appendix E D791 and T791 Head and Valve Holddown Assembly Details
Appendix E D nd T Hed nd Vlve Holddown Assemly Detils Hed First Stge Holddown Assemly (") Suction with Unloder Suction (Stndrd) First Stge Holddown Assemly (") Dischrge See figure A 0 CAUTION: Alwys relieve
4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
Transmission and Driveline. Section 2A - Transmission and Driveline
Trnsmission nd Driveline Trnsmission nd Driveline Tle of Contents Section 2A - Trnsmission nd Driveline 2 A Generl Informtion...2A-2 Ger Rtio Selection...2A-2 Engine nd Propeller Shft Instlltion Angle...2A-2
2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
Solenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
Hand-operated Actuator Type 3273
Hnd-operted Actutor Type 3273 Appliction Hnd-operted ctutor for ttchment to vlves, especilly for Series 240, 250 nd 260 Control Vlves. Rted trvels of 5 nd 30 mm. Nominl thrusts up to 32 kn The Type 3273
2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation
0/0 /, / nd / directionl poppet vlve with solenoid ctution.7 Type M-.SEW...LX Size Up to 0 r Up to 0 L/min Contents Function nd configurtion Symols 0 Specifiction 0 Technicl dt 0 Electricl dt 0 Chrcteristic
CS 7780 FULL FUNCTION DRIVE-UP TERMINAL
L CLL -800--600 CS 80 FULL FUNCTION DRIVE-UP TERMINL mm ( ") UL - "or " DISPLY THROUGH 0mm (8") MXIMUM WLL CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
Directional Valve Size 04 WL 4.04
Directionl Vlve Size 04 WL 4.04 Instlltion dimensions ISO 4401/ DIN 24340 4 Directionl vlve size 04 instlltion dimensions ISO 4401 / DIN 24340 4 Functionl description he directionl control vlves WL 4/04
Lincoln Under-cabinet Light Installation Instructions
Lincoln Under-cbinet Light Instlltion Instructions #1500178 Rev A Congrtultions on your new Lincoln Under-cbinet Light! Whether purchsed for its significnt energy svings nd efficiency, lower lifetime costs,
CC-410 KIT SERIES INSTRUCTION SHEET
(COMPLETE CC-410-W KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CC-410 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMG OF SLIDING DOORS. CN
330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15
L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
NT Series SSS MARK-II
efore using the product, plese check the For ltest informtion, DF ctlogs nd opertion mnuls N Series SSS MRK-II se unit Unit with ll options Fetures Extensive vritions wide rnge of functions nd other options
NT Series SSS MARK-II
efore using the product, plese check the For ltest informtion, DF ctlogs nd opertion mnuls Series SSS MRK-II se unit Unit with ll options Fetures Extensive vritions wide rnge of functions nd other options
PREFILL AND EXHAUST VALVE PV 100 TO PV 200
PREFILL ND EHUST VLVE Ref. No. Relese 08/2006 1 Description Set type construction. llows free flow from it's port to port. Flow from port to port cn e hd y pplying pilot pressure to it's port. The decompression
FUEL SYSTEM 5 E BSO / SAV EMISSION FUEL SYSTEM
FUEL SYSTEM 5 E 73662 BSO / SAV EMISSION FUEL SYSTEM Tle of Contents Pge Identifiction............................. 5E-1 Replcement Prts Wrning............... 5E-1 Torque Specifictions.....................
p max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60
4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl
CCD-493 KIT SERIES INSTRUCTION SHEET
(COMPLETE CCD-493-W KIT ILLUSTRTED. CUT-OUTS IN TRCK TO EXPOSE COMPONENTS) CCD-493 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING S. CN BE INSTLLED
Boiler room components 0861EN April 2017 Distribution and regulation units
oiler room components 8EN pril Distriution nd regultion units R8R R8RY R8RY R8RY R8RY Unit with insultion nd ctutor (optionl) R8RY R8RY R8RY R8RY Description R8R distriution units control heting nd cooling
3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94
3/2 nd 4/2-wy Directionl oppet Vlves with Solenoid Opertion Model M-SED 6, Series X Size 6 000 SI (30 r) 6.6 GM (2 L/min) R 22 049/06.98 R 22 049/06.98 Replces: 02.96 Fetures: Direct operted directionl
Electrically controlled directional control poppet valve type UREZ6
LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion
tel. +44 (0) 28 37 518111 fx +44 (0) 28 37 528181 e.mil sles@technidrive.co.uk points for considertion when shft mounting direct drive ger units. modern hollow bore output hub ger units lend themselves
(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
product range leading valve technology TM
1 product rnge leding vlve technology TM 01 y müller cox g ll technicl informtion is up to dte t the time of going to press. We reserve the right to mke technicl chnges. Unfortuntely, we cnnot exclude
Press control block PSB Type approved according to DIN EN 693
Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording
Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
Appendix E Head and Valve Assembly Details All D-Style Models 351
Appendix E Hed nd Vlve Assemly Detils All D-Style Models FD Hed Vlve Holddown Assemlies Suction (spec P) 0 0 Suction (spec P) 0 0 Dischrge (ll specs) 0 WFD Hed Appendix E Hed nd Vlve Assemly Detils All
4/2 and 4/3 Solenoid Directional Valve, ISO Size 03
4/ nd 4/3 Solenoid Directionl Vlve, ISO Size 03 Q mx = 60 l/min, p mx = 315 r wo-stge design, with EX-sfty solenoid coil Vlve: High switching relilility thnks to two-stge follower spool design Slip-on
Directional Valve Size 06 WL 4.06
Directionl Vlve Size 06 WL 4.06 Instlltion dimensions ISO 4401/DIN 24340 6 Directionl vlve size 06 instlltion dimensions ISO 4401 / DIN 24340 6 Functionl Description he directionl control vlves WL 4/06
631 ALLOWANES AND TOLERANCES
631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce
POWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24
POWERHEAD Section 4A - Cylinder Hed CYLINDER HEAD Tle of Contents Specifictions........................... 4A-2 Specil Tools........................... 4A-4 Cylinder Hed.......................... 4A-6
Energy Recovery Ventilator
PEG1610044CE Version:1601 Service Mnul Energy Recovery Ventiltor (North meric Mrket) WRNING This service informtion is designed for experienced repir technicins only nd is not designed for use by the generl
ELECTRICAL SYSTEM 4 D INSTRUMENTATION
ELECTRICAL SYSTEM 4 D 72747 INSTRUMENTATION Tle of Contents Pge Identifiction............................. 4D-1 Specil Informtion....................... 4D-1 Lighting Options....................... 4D-1
COIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL
SIDE CR FOR INSTLLTION NEXT TO DIEBOLD 00 - IN LOBBY TELLER (ILT) L2 CLL -800--600 CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
CCS-810 KIT SERIES INSTRUCTION SHEET
(COMPLETE KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CCS-810 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING DOORS. CN BE INSTLLED
Spark Plug Fouling 3.0 Liter OptiMax
WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected
REPLACEMENT. 4. REMOVE WINDSHIELD MOULDING OUTSIDE (a) Using a knife, cut off the moulding, as shown in the illustration.
7012 REPLCEMENT The instlltion procedures re the removl procedures in reverse order. However, only instlltion procedures requiring dditionl informtion re included. 1. REMOVE ROOF HEDLINING SSY (See pge
WINDSHIELD / WINDOWGLASS
WINSHIEL / WINOWGLSS QURTER WINOW GLSS QURTER WINOW GLSS OY WINSHIEL / WINOWGLSS OMPONENTS 97 RER SIE SETK FRME LH RER SIE SETK FRME RH RER SET USHION SSEMLY RER OOR OPENING TRIM WETHERSTRIP LH TONNEU
JUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
ELECTRICAL AND IGNITION
ELECTRICAL AND IGNITION 2 D TIMING/SYNCHRONIZING/ADJUSTING 2D- 1 Tle Of Contents Pge Timing/Synchronizing/ Adjusting............................ 2D-1 Specifictions........................ 2D-1 Specil Tools.........................
Brazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
Carl Nielsen Music is Life. SET UP MANUAL Travelling Exhibition from Odense City Museums DK-5000 Denmark
Crl Nielsen Music is Life SET UP MNUL Trvelling Exhiition from Odense City Museums DK-5000 Denmrk CONTENT IN FLIGHTCSES CRL NIELSEN TOURING EXHIITION ODENSE CITY MUSEUMS KVORNING DESIGN & COMMUNICTION,
Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)
Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl
SOLENOID VALVES / DIRECTIONAL CONTROL VALVES
OM SOLENOID VLVE HD1N SIZE 025 Fetures HD1 N Series (for 7 M) 1. ompct 2. Dust- nd wter-proof of highest level (I67), thnks to use of M12-4 pin connector 3. Since it opertes t low currency, it cn e connected
1 SGI 500XT INVERTER TRANSFORMER WITH OUTDOOR ENCLOSURE CONDUIT, FITTINGS AND CONDUCTORS AS REQUIRED
1. THIS DOCUMENT IS INTENDED TO ILLUSTRTE THE PPLICTION OF 600VC TRNSFORMER WITH OUTDOOR ENCLOSURE WITH SOLECTRI RENEWLES SGI 500XT INVERTER. EXMPLES OF THE FOLLOWING RE GIVEN: - INVERTER TO TRNSFORMER
2 Way Slip-In Cartridge Valves Series CE, CP, C
tlogue H-3500/UK hrcteristics Wy Slip-In rtridge lves Series E,, wy slip-in crtridge vlves re hydruliclly controlled set vlves tht re designed for compct block instlltion. Slip-in crtridge, cover, nd pilot
Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)
Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if
TECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS
TECHNICAL INSIGHT PRODUCT AND APPLICATION ENGINEERING INFORMATION A PUBLICATION OF NSK AMERICAS INTERNAL CLEARANCE - TYPES AND NORMS Internl clernce is the distnce which the two rings of non-instlled bering
330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L08 CLL -800--600 R CS 0 FULL FUNCTION TERMINL " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I, CEN III GS OR CEN IV GS SFES SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS
203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L0 CLL -800--600 R CS 0 FULL FUNCTION VESTIBULE TERMINL " OR " DISPLY-THROUGH 0mm ( MXIMUM WLL 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
TFM 1600 Seat Body Material: Stainless. PTFE Seat Body Material: Stainless and Brass. Catalog No. V81-5 Sept. 2008
Ctlog No. V81-5 Sept. 2008 Vlve with lever hndle Working pressure sets: 68.9 br (1000 psig) TFM sets: 137 br (2000 psig) Vlve with butterfly hndle Working pressure sets: 68.9 br (1000 psig) TFM sets not
* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
DIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7
L2 CLL -800--600 TP-826-00. R CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE DIEBOLD 00 - IN LOBBY TELLER (ILT) PORTRIT OR LNDSCPE
FUEL SYSTEM. Section 3A - Carburetor/Fuel Pump
Tle of Contents FUEL SYSTEM Section 3A - Cruretor/Fuel Pump CARBURETOR/FUEL PUMP Specifictions................................ 3A-1 Specil Tools................................ 3A-1 Cruretor (20/25/JET
OPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT
L88 CLL -0--600 R DIEBOLD 0 CSH RECYCLER WITH COIN 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES THROUGH 0mm (") MXIMUM WLL 64 SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND
LTV 29-2 and 39-2 angle nutrunners. Higher speed, lower energy consumption
LTV 29-2 nd 39-2 ngle nutrunners Higher speed, lower energy consumption Thumbs up for the LTV 9 series in customer trils LTV 29 tril rouses Ford s interest The Ford plnt in Cologne, Germny, with cpcity
BERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve
Bsic Vlve??????? WW-400 Bsic Vlve The bsic Model WW-400 diphrgm ctuted hydruliclly operted vlve is t the leding edge of control vlve design. It combines simple nd relible construction with superior performnce,
Aluminium Floor Outlets - Trapped Outlets
Aluminium Floor Outlets - Trpped Outlets Verticl Trpped Outlet Components Drin Body Dimensions 260 Grte* Funnel Sel Trp Assemly Funnel Cup * Elevtion Throt Throt Sel DPM Clmp Ring with Weep Bung (shown
CS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")
L08 CLL -800--600 " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation
3/3, 4/2 nd 4/3 directionl poppet vlve with solenoid ctution RE 22035/06.10 Replces: 12.08 1/16 Type SEC Size 6 Component series 1X Mximum operting pressure 420 r [6100 psi] Mximum flow 25 l/min [6.6 US